Answer: 162.4
Sorry if you get it wrong :(
Explanation:
A continuous function y = ƒ(x) is known to be negative at x = 0 and positive at x = 1. Why does the equation ƒ(x) = 0 have at least one solution between x = 0 and x = 1? Illustrate with a sketch
Answer:
69
Explanation:
69420=420659782
fjkdod
A ramjet operates by taking in air at the inlet, providing fuel for combustion, and exhausting the hot air through the exit. Th e mass fl ow at the inlet and outlet of the ramjet is 60 kg/s (the mass fl ow rate of fuel is negligible). Th e inlet velocity is 225 m/s. Th e density of the gases at the exit is 0.25 kg/m3 , and the exit area is 0.5 m2 . Calculate the thr
Answer:
15300 N
Explanation:
[tex]\rho_i[/tex] = Density of air at inlet
[tex]\dfrac{m}{t}[/tex] = Mass flow rate = 60 kg/s
[tex]v_i[/tex] = Inlet velocity = 225 m/s
[tex]\rho_o[/tex] = Density of gas at outlet = [tex]0.25\ \text{kg/m}^3[/tex]
[tex]A_i[/tex] = Inlet area
[tex]A_o[/tex] = Outlet area = [tex]0.5\ \text{m}^2[/tex]
Since mass flow rate is the same in the inlet and outlet we have
[tex]\rho_iv_iA_i=\rho_ov_oA_o\\\Rightarrow v_o=\dfrac{\dfrac{m}{t}}{\rho_oA_o}\\\Rightarrow v_o=\dfrac{60}{0.25\times 0.5}\\\Rightarrow v_o=480\ \text{m/s}[/tex]
Thrust is given by
[tex]F=\dfrac{m}{t}(v_o-v_i)\\\Rightarrow F=60\times (480-225)\\\Rightarrow F=15300\ \text{N}[/tex]
The thrust generated is 15300 N.
CAD(computer-aided design) software and is used in__________and __________that show how to construct an object. Technical drawings show in detail how the pieces of something relate to each other.
Answer:
Plans; blueprints.
Explanation:
In Engineering, it is a common and standard practice to use drawings and models in the design and development of various tools or systems that are being used for proffering solutions to specific problems in different fields such as engineering, medicine, telecommunications and industries.
Hence, a design engineer make use of drawings such as pictorial drawings, sketches, or technical drawing to communicate ideas about a design to others, to record and retain informations (ideas) so that they're not forgotten and to analyze how different components of a design work together.
Technical drawing is mainly implemented with CAD (computer-aided design) software and is typically used in plans and blueprints that show how to construct an object.
Additionally, technical drawings show in detail how the pieces of something (object) relate to each other, as well as accurately illustrating the actual (true) shape and size of an object in the design and development process.
An earth station at latitude 30°S is in communication with an earth station on the same longitude at 30°N, through a geostationary satellite. The satellite longitude is 20° east of the earth stations. Calculate the antenna-look angles for each earth station and the round-trip time, assuming this consists of propagation delay only..
A reservoir is 1 km wide and 10 km long and has an average depth of 100m. Every hour, 0.1% of the reservoir's volume drops through a vertical height of 100 m and passes through turbines to produce electricity with an efficiency of 92%. What is the electrical power output of this facility?
Answer:
250.7mw
Explanation:
Volume of the reservoir = lwh
Length of reservoir = 10km
Width of reservoir = 1km
Height = 100m
Volume = 10x10³x10³x100
= 10⁹m³
Next we find the volume flow rate
= 0.1/100x10⁹x1/3600
= 277.78m³/s
To get the electrical power output developed by the turbine with 92 percent efficiency
= 0.92x1000x9.81x277.78x100
= 250.7MW
Phosphorous is added to make an n-type silicon semiconductor with an electrical conductivity of 1.75 (Ωm)-1 . Calculate the necessary number of charge carriers required
Answer:
The necessary number of electron charge carriers required is:
8.1019 × 10¹⁹ electrons/m³
Explanation:
The necessary number of charge carriers required can be determined from the resistivity. Given that, the phosphorus make an n-type of silicon semiconductor;
Resistivity [tex]\rho = \dfrac{1}{\sigma}[/tex]
[tex]\rho = \dfrac{1}{q \mu _n n_n}[/tex]
where;
The number of electron on the charge carriers [tex]n_n[/tex] is unknown??
The charge of the electron q = [tex]1.6 \times 10^{-19} \ C[/tex]
The electron mobility [tex]\mu_n[/tex] = 0.135 m²/V.s
The electrical conductivity [tex]\sigma[/tex] = 1.75 (Ωm)⁻¹
Making [tex]n_n[/tex] the subject from the above equation:
Then;
[tex]n_n = \dfrac{\sigma }{q \mu_n}[/tex]
[tex]n_n = \dfrac{1.75 \ \Omega .m^{-1} }{1.6 \times 10^{-19} \times 0.135 \ m^2/V.s}[/tex]
[tex]n_n =8.1019 \times 10^{19}[/tex] electrons/m³
Thus; the necessary number of electron charge carriers required is:
8.1019 × 10¹⁹ electrons/m³
is released from under a vertical gate into a 2-mwide lined rectangular channel. The gate opening is 50 cm, and the flow rate into the channel is 10 m3/s. The channel is lined with reinforced concrete and has aManning roughness coefficient of 0.015, a horizontal slope, and merges with a river where the depth of flow is 3.5 m. Does a hydraulic jump occur in the lined channel
Answer:
hello your question is incomplete attached below is the complete question
answer: There is a hydraulic jump
Explanation:
First we have to calculate the depth of flow downstream of the gate
y1 = [tex]C_{c} y_{g}[/tex] ----------- ( 1 )
Cc ( concentration coefficient ) = 0.61 ( assumed )
Yg ( depth of gate opening ) = 0.5
hence equation 1 becomes
y1 = 0.61 * 0.5 = 0.305 m
calculate the flow per unit width q
q = Q / b ----------- ( 2 )
Q = 10 m^3 /s
b = 2 m
hence equation 2 becomes
q = 10 / 2 = 5 m^2/s
next calculate the depth before hydraulic jump y2 by using the hydraulic equation
answer : where y1 < y2 hence a hydraulic jump occurs in the lined channel
attached below is the remaining part of the solution
An annealed copper strip of 228 mm wide and 25 mm thick being rolled to a thickness of 20 mm, in one pass. The roll radius is 300 mm, and the rolls rotate at 100 rpm. Calculate the roll force and the power required in this operation
Answer:
The roll force is 1.59 MN
The power required in this operation is 644.96 kW
Explanation:
Given;
width of the annealed copper, w = 228 m
thickness of the copper, h₀ = 25 mm
final thickness, hf = 20 mm
roll radius, R = 300 mm
The roll force is given by;
[tex]F = LwY_{avg}[/tex]
where;
w is the width of the annealed copper
[tex]Y_{avg}[/tex] is average true stress of the strip in the roll gap
L is length of arc in contact, and for frictionless situation it is given as;
[tex]L = \sqrt{R(h_o-h_f)} \\\\L = \sqrt{300(25-20)}\\\\L = 38.73 \ mm[/tex]
Now, determine the average true stress, [tex]Y_{avg}[/tex], for the annealed copper;
The absolute value of the true strain, ε = ln(25/20)
ε = 0.223
from true stress vs true strain graph; at true strain of 0.223, the true stress is 280 MPa.
Then, the average true stress = ¹/₂(280 MPa.) = 180 MPa
Finally determine the roll force;
[tex]F = LwY_{avg}[/tex]
[tex]F = (\frac{38.73 }{1000})(\frac{228}{1000})*180 \ MPa\\\\F = 1.59 \ MN[/tex]
The power required in this operation is given by;
[tex]P = \frac{2\pi FLN}{60}\\\\P = \frac{2\pi (1.59*10^6)(0.03873)(100)}{60}\\\\P = 644955.2 \ W\\\\P = 644.96 \ kW[/tex]
pls help!!! will give brainly!!!
What is the difference between a short-term goal and a long-term goal? Give an example of each.
How do I answer all the questions on this page?
Answer:
Create a google docs copy everything and paste hope this helps! :)
Explanation:
Expert Review is done by end users.
Answer:nononononono
Explanation:
A function is different from a procedure because a functiondoes not contain a set of instructions.can have only a limited number of steps.returns a value.is mathematical.
Answer: A function returns a value and a procedure just executes commands.
Explanation:
Answer:
c - returns a value.
Explanation:
on edge pls mark brainiest
An automotive fuel cell consumes fuel at a rate of 28m3/h and delivers 80kW of power to the wheels. If the hydrogen fuel has a heating value of 141,790 kJ/kg and a density of 0.0899 kg/m3, determine the efficiency of this fuel cell.
Answer:
The efficiency of this fuel cell is 80.69 percent.
Explanation:
From Physics we define the efficiency of the automotive fuel cell ([tex]\eta[/tex]), dimensionless, as:
[tex]\eta = \frac{\dot W_{out}}{\dot W_{in}}[/tex] (Eq. 1)
Where:
[tex]\dot W_{in}[/tex] - Maximum power possible from hydrogen flow, measured in kilowatts.
[tex]\dot W_{out}[/tex] - Output power of the automotive fuel cell, measured in kilowatts.
The maximum power possible from hydrogen flow is:
[tex]\dot W_{in} = \dot V\cdot \rho \cdot L_{c}[/tex] (Eq. 2)
Where:
[tex]\dot V[/tex] - Volume flow rate, measured in cubic meters per second.
[tex]\rho[/tex] - Density of hydrogen, measured in kilograms per cubic meter.
[tex]L_{c}[/tex] - Heating value of hydrogen, measured in kilojoules per kilogram.
If we know that [tex]\dot V = \frac{28}{3600}\,\frac{m^{3}}{s}[/tex], [tex]\rho = 0.0899\,\frac{kg}{m^{3}}[/tex], [tex]L_{c} = 141790\,\frac{kJ}{kg}[/tex] and [tex]\dot W_{out} = 80\,kW[/tex], then the efficiency of this fuel cell is:
(Eq. 1)
[tex]\dot W_{in} = \left(\frac{28}{3600}\,\frac{m^{3}}{s}\right)\cdot \left(0.0899\,\frac{kg}{m^{3}} \right)\cdot \left(141790\,\frac{kJ}{kg} \right)[/tex]
[tex]\dot W_{in} = 99.143\,kW[/tex]
(Eq. 2)
[tex]\eta = \frac{80\,kW}{99.143\,kW}[/tex]
[tex]\eta = 0.807[/tex]
The efficiency of this fuel cell is 80.69 percent.
If a weld is laying into a joint with a concave weld contour with undercutting issues, what might be the cause?
A. Spatter build up on the gun parts
B. Not enough gel applied to the top
C. Base metal in not cooled properly
D. Voltage of the machine is set too high
Answer:bbbb
Explanation:
1. Drill press size is determined by the largest__
For three control stations,there should be how many start buttons in parallel with the suxiliary contact
please hurry i’ll give you 15 points
Answer:
measures, dissolves, liquid, carbon dioxide, evaporates, water vapor, mold, decompose
What cell type has no membrane-bound organelles, has DNA that is found in an area called the
nucleoid, and is very small?
A. Eukaryotic cell
B. Prokaryotic cell
C. Animal cell
D. Plant cell
Answer:
Prokaryotic cell
Explanation:
PLEASE ANSWER SOON
In a science lab, Cash mixes two clear liquids together in a beaker. Bubbles are produced, and a white solid forms and settles to the bottom. Which statement below describes what happened?
a
A physical change occurred, a gas and precipitate was produced
b
A physical change occurred, only a gas was produced
c
A chemical change occurred, only a gas was produced
d
A chemical change occurred, a gas and precipitate was produced
Answer:
I think it is D
Explanation:
I did a couple mins of research on this topic but there is no clear line that separates a physical and chemical reaction, so do with that as you will. i hope I somewhat helped.
Assume that Randy’s photocopying Service charges $.10 per photocopy. If fixed costs are
$27000 a year and variable costs are $0.04 per copy.
1. How Randy can compute his breakeven point? Show the result in graph.
2. How many photocopies are required to earn $ 500 profit?
3. Identify the safety margin at breakeven point.
Answer:
1) 739 copies (739.7260273972603).
2) 5000 copies.
Explanation:
27000/365 = 73.97260273972603 (Their daily wins). How much times $.10 is equal to 73.97260273972603?
I used a two step equation to get it.
0.10 * x = 73.97260273972603/0.10 = /0.10 x = 739.7260273972603They need to sell 739.7260273972603 copies a day to get 27000$ a year.
an equation (y = mx+b) can be
y = 739.7260273972603x
To earn a 500$ profit we need to do the same two-step equation but instead of 73.97260273972603 use 500.
0.10 * x = 500/0.10 = /0.10 x = 50005000 copies needs to be sold to get a 500$ profit.
The last question I don't understand but I hope those 2 questions helped