Light - emitting diode lightbulbs known as LED lightbulbs are energy saving lightbulbs. They consume very small amount of energy compare to other lightbulbs. Therefore, LED lightbulbs are the most energy efficient way to light your home, as they use about ten percent (10%) of the energy of a comparable compact fluorescent bulb.
There are varieties of different light bulbs. some of them are incandescent, compact fluorescent (CFL), halogen, and light-emitting diode (LED) to mention a few.
Before the advent of light - emitting diode (LED) bulbs, some of the bulbs consume a lot of energy. For instance, we have incandescent bulbs of 20 watts, 50 watts, 100 watts and even 200 watts.
But with the advent of light - emitting diode (LED) bulbs, consumers can save energy because light - emitting diode (LED) bulbs save a lot of energy and they are very bright.
We can therefore conclude that light - emitting diode lightbulbs known as LED lightbulbs are the most energy efficient way to light your home, as they use about ten percent (10%) of the energy of a comparable compact fluorescent bulb.
Learn more here: https://brainly.com/question/13423221
your field of study in college is called your________.
Answer:
Majors are also called concentrations. An academic major or concentration is a college or university student's main field of specialization during his or her associates or undergraduate studies which would be in addition to, and may incorporate portions of, a core curriculum.
as shown in the figure, a 10-kg block on a perfectly smooth horizontal table is connected by a horizontal string to a 63-kg block that is hanging over the edge of the table. what is the magnitude of the acceleration of the 10-kg block when the other block is gently released?
Newton's second law allows to find the acceleration of the two-body system, where a mass is hanging is:
The acceleration of the system is: a = 8.46 m / s²
Newton's second law states that the net force on a body is equal to the product of the mass and the acceleration.
∑ F = m a
Where the bold letters indicate vectors, F is the force, m the mass and the acceleration of the body.
A free body diagram is that diagram of the system where the forces are shown without the details of the bodies. In the attachment we have a free-body diagram of the system.
Let's write Newton's second law for each axis.
x- axis
T = m₁ a
y-axis
body in the horizontal part
N-W₁ = 0
N = W₁
Body hanging.
W₂ - T = m₂ a
Wwhere the positive direction is down, let's write our system of equations.
T = m₁ a
W₂-T = m₂ a
Let's Resolve.
m₂ g = (m₁ + m₂) a
a = [tex]\frac{m_2}{m_1+m_2} \ g[/tex]
Let's calculate.
a =[tex]\frac{63}{10+63} \ 9.8[/tex]
a = 8.46 m / s²
In conclusion using Newton's second law we can find the acceleration of the two-body system, where a mass is hanging is:
The acceleration of the system is: a = 8.46 m / s²
Learn more about Newton's second law here: brainly.com/question/13959891
a person would weigh less on Mercury than on planet blank because blank
Answer:
Earth because of greater gravity
What makes rusting a redox reaction?
A. It is an example of combustion, which is a redox reaction.
B. Electrons are transferred from oxygen atoms to iron atoms.
C. Any reaction involving oxygen is a redox reaction.
D. Electrons are transferred from iron atoms to oxygen atoms.
(No links please)
Electrons are transferred from oxygen atoms to iron atoms is a redox reaction. Option B is correct.
What is a redox reaction?A redox reaction is a type of chemical reaction in which two species exchange electrons.
Any chemical process in which the oxidation number of a molecule, atom, or ion changes by gaining or losing an electron is known as an oxidation-reduction reaction.
A redox reaction can result in the creation of hydrogen fluoride. The creation of hydrogen fluoride is another example of a redox reaction.
We can evaluate the oxidation and reduction of reactants by breaking down the process. Each hydrogen turns positive after being oxidized and losing two electrons.
Electrons are transferred from oxygen atoms to iron atoms is a redox reaction.
Hence, the option B is correct.
To learn more about the redox reaction, refer to the blink;
https://brainly.com/question/13293425
#SPJ2
Answer: D) Electrons are transferred from iron atoms to oxygen atoms
If anyone else needs it
Explanation: the iron is increasing in oxidation number (losing electrons) and oxygen is decreasing in oxidation number (gaining electrons). This tells us that we have oxidation (or rusting) taking place.
A galaxy spectrum has a redshift of 70,000 km per second. If the Hubble constant is 70 km per second per Mpc (megaparsec), how far away from us in this galaxy
Using the Hubble law v = H₀d where v = recessional speed = 70,000 km per second H₀ = hubble constant = 70 km/s/Mpc and d = distance of galaxy.
Making d subject of the formula, we have
d = v/H₀
Substituting the values of the variables into the equation, we have
d = v/H₀
d = 70000 km/s/70 km/s/Mpc
d = 1000 Mpc
So, the galaxy is 1000 Mpc away from us.
Learn more about hubble law here:
https://brainly.com/question/18484687
Question 5: A heavy rope is flicked upwards, creating a single pulse in the rope. Make a drawing of the rope and indicate the following in your drawing
a. the direction of motion of the pulse
b. Amplitude
c. Pulse length
d. Position of the rest
Answer:
the direction of motion of the pulse
how do mechanical waves compare with electromagnetic waves?
Answer:
Electromagnetic waves are waves that have no medium to travel whereas mechanical waves need a medium for its transmission. Electromagnetic waves travel in a vacuum whereas mechanical waves do not. The mechanical waves need a medium like water, air, or anything for it to travel.
Explanation:
1 point
What is the potential energy of a 12543 kg tank this on the ground? (only
put the number, no units or commas) *
Answer:
PE=0
Explanation:
If the tank is on the ground, there is 0 height which means the equation of PE=mh will be PE=12543(0)=0, hope this helps!
un cuerpo suspendido en el aire es capaz de:
a) liberar energía al caer
b) puede ejecutar un trabajo
c) posee energía antes de caer
d) todas son correctas
Answer:
Explanation:
d
A 0.60 kg mass is moving horizontally with a speed of 7.0 m/s when it strikes a vertical wall. The mass rebounds with a speed of 4.20 m/s. What is the magnitude of the change in linear momentum of the mass
Answer: The magnitude of the ball's momentum change is
Δp=m∣ν
i
−ν
f
∣=(0.70kg)∣(5.0m/s)−(−2.0m/s)∣=4.9kg⋅m/s.
Explanation:
Find the work done while lifting a 115 kg sofa 1.5 m off the ground.
Find the weight first
P= 10m = 10 x 115 = 1150 N
work done while lifting a 115 kg sofa 1.5 m off the ground :
A= Ph = 1150 x 1.5 = 1725 J
P/s: I think the weight first is 115kg
ok done. Thank to me :>
Elements in the periodic table are arranged in order of increasing...
A mass number
B.Number of protons
C. number of neutrons
D. number of nucleons
Answer:
(B) The number of protons - only the number of protons in the nucleus determines the element - mass and neutrons can vary for the same element
Plzzzz help meeeeeeee
Answer:
15m²
8.6m²
lcm²
6000cm²
0.1km²
40cm²
5210 mm²
500m²
0.0087mm²
500cm²
What is the total amount of potential and kinetic energy in a system? *
1 point
A: Electrical energy
B: Heat energy
C: Mechanical energy
D: Nuclear energy
Answer:
C. Mechanical Energy
Explanation:
The total amount of mechanical energy is merely the sum of the potential energy and the kinetic energy.
What can cause matter to change from one state to another?
a change in its temperature
a change in its pressure
both a and b
neither a nor b
a ______ is a push or pull that acts on an object
Answer:
A force is a push or pull that acts on an object.
:)
Answer:
force
Explanation:
It's unit is in Newton
A 2.3 kg ball has 76 J of kinetic energy. How fast is it moving? Show all work and use correct units of measurement for the answer to get full credit.
Answer:
8.13 m/sExplanation:
The kinetic energy of an object can be found by using the formula
[tex]k = \frac{1}{2} m {v}^{2} \\ [/tex]
m is the mass in kg
v is the velocity in m/s
To find the velocity we make v the subject of the equation
That's
[tex]v = \sqrt{ \frac{2k}{m} } \\ [/tex]
From the question
k = 76 J
m = 2.3 kg
We have
[tex]v = \sqrt{ \frac{2 \times 76}{2.3} } = \sqrt{ \frac{152}{2.3} } \\ = 8.129388...[/tex]
We have the final answer as
8.13 m/sHope this helps you
What substance is a polymer found in nature?
Silk,wool, DNA, cellulose and protein
the second law of thermodynamics imposes what limit on the efficiency of a heat engine?
A heat engine cannot have a thermal efficiency of 100% For all reversible processes, the second-law efficiency is 100%. The second-law efficiency of a heat engine cannot be greater than its thermal efficiency. The second-law efficiency of a process is 100% if no entropy is generated during that process
A car accelerates from rest to 40 m/s. Later, on a highway it accelerates from 40 m/s to 80 m/s. Which takes more energy, going from 0 to 40, or from 40 to 80
Answer:
40 to 80
Explanation:
A car's kinetic energy changes with the speed. Cars going slower have less potential energy than cars going faster.
Andrew skis down a hill.
Andrew starts from the top of the hill and his speed increases as he goes downhill.
He controls his speed and direction by using his skis.
He brings himself to a stop at the bottom of the hill.
Describe the energy changes that happen between starting and stopping.
Explanation:
gravitational potential energy at the top of the hill, which transforms into kinetic energy as he moves bottom of the hill
that's mean potential energy transfoms into kinetic energy
His potential energy is converted into kinetic energy when his speed increases as he goes downhill.
What is mechanical energy?Mechanical energy is the combination of all the energy in motion represented by total kinetic energy and the total potential energy stored energy in the system which is represented by total potential energy.
Total mechanical energy is s the sum of all the kinetic as well as potential energy stored in the system.
ME = KE + PE
When Andrew skis down a hill then he had stored potential energy due to the height of the hill and his gravitational weight,
Due to the height of the slope and his weight, Andrew had potential energy stored when he skied down it.
As he descended the hill, his speed increased, transforming this potential energy into kinetic energy.
Learn more about mechanical energy from here,
brainly.com/question/12319302
#SPJ2
A student jumps off a sled toward the west after it stops at the bottom of an icy hill.
Based on the law of action-reaction, in what direction will the sled most likely move as the student jumps off?
Answer:
Explanation:
That’s dangerous who would do that.
Me
A black disk rotates with constant speed and a coin that is located on the edge of the disk moves with speed v. If on a white disk that also rotates with constant speed, we place the same coin on the edge, it is moving with speed 4v. Which disk has a larger radius?
The white disk has a larger radius.
We know that the speed of the coin v = rω where r = radius of the disk and ω = angular speed of the disk.
Now, since both disks rotate at constant speed, ω = constant.
So, v ∝ r
For the black disk, its radius is r, the coins speed is v.
For the white disk, let its radius be R, the coins rotates at a speed V = 4v
We know that v ∝ r.
Since the coin on the white disk has a greater speed, so its radius would be greater.
So, the white disk has a larger radius.
Learn more about radius of a disk here:
https://brainly.com/question/24712423
A body moving with constant acceleration covers the distance between tu point 60m apart in 5s. Its velocity as it passes the second point is 15m/s. What is the acceleration?
Please find attached photographs for your answer.
Hope it helps.
Do comment if you have any query.
. The gas in a piston (defined as the system) warms and absorbs 655 J of heat. The expansion performs 344 J of work on the surroundings. What is the change in internal energy for the system
The change in the internal energy for the system is 311 J
The change in internal energy for the system will be the difference between the heat absorbed and the work expansion from the surroundings.
i.e.
ΔU = Q + W
where;
internal energy = Uheat absorbed = Qworkdone on surroundings = -WΔU = ( 655 J + ( - 344 J) )
ΔU = 311 J
Learn more about change in internal energy for the system here:
https://brainly.com/question/20920764?referrer=searchResults
What is the acceleration of a 20 kg backpack lifted with a force of 15 N?
a. 0.75 m/s2
b. 1.33 m/s2
c. 300 m/s2
d. 5 m/s2
The answer is option A. 0.75 m/s^2
the formula needed to solve this is acceleration = force/mass
we know the following:
mass of the backpack = 20KG
the force is 15N
therefor- acceleration = 15/20
which can also be written as 3/4, leaving us with the final answer of .75 m/s^2
Answer:
0.75 m/s2
Explanation:
0.75 m/s2
NEED ANSWER ASAP!
Which statement about a converging lens is not correct?
A ray parallel to the principal axis of the lens is refracted through the principal focus.
B All rays of light refracted by the lens pass through the principal focus.
C The distance between the centre of the lens and the principal focus is the focal length
D The principal focus of the lens is a point on the principal axis.
Geometric optics allows you to find which the correct answer about which false statement is:
B) All rays of light refracted by the lens pass through the principal focus.
Geometric optics studies the formation of images using the light geometric properties of optical systems, the main expression for this is:
[tex]\frac{1}{f} = \frac{1}{p} + \frac{1}{q}[/tex]
Where f is the focal length, p and q the distance to the object and the image respectively.
There are some points of special interest:
Object at infinity (p = ∞). In this case of the expression we see that the image is at the focal length. Image at infinity (q = ∞). In this case the object is at the focal point.
Let's analyze the claims.
A) True. A parallel ray comes from infinity and the image is formed at the focal point.
B) False. The image point is given by the expression above and depends on the distance to the object.
C) True. This is the definition of focal length.
D) True. All distances are measured from the main axis.
In conclusion, using geometric optics we can find that the correct answer about which false statement is:
B) All rays of light refracted by the lens pass through the principal focus.
Learn more about geometric optics here: brainly.com/question/2548694
John carries a 5 kg bag horizontally to the checkout line. How much work must he
do to move it 8 m at a constant velocity of 1 m/s to the right?
The work John must do to move the bad horizontally to given distance is 2.5 J.
The given parameters;
mass of the bag, m = 5 kgdistance moved by the bad, d = 8 mvelocity of bag, v = 1 m/sThe acceleration of the bag at the given distance and velocity is calculated as follows;
[tex]v^2 = u^2 + 2as\\\\1^2 = 0 + 2(a)(8)\\\\1 = 16 a\\\\a = \frac{1}{16} \\\\a = 0.0625 \ m/s^2[/tex]
The work done in moving the bag to 8m is calculated as follows;
[tex]W = F \times d\\\\W = ma \times d\\\\W = 5 \times 0.0625 \times 8 \\\\W = 2.5 \ J[/tex]
Thus, the work John must do to move the bad horizontally to given distance is 2.5 J.
Learn more here:https://brainly.com/question/19498865
Do we grow taller when we hang on a branch for 1 min?
Answer:
Temporarily yes, if you are speaking of a skeletally mature person, taking pressure off of joints will allow them to absorb more fluid and thus be a larger diameter. If that expansion is in a vertical direction then you would in fact be taller until the fluid was returned to outside of the joint.
a runner joys 12km north than turs and runs 16km east in three hours.
a. what is his displacement
b. calculate his average speed
c. calculate his average including the direction
Explanation:
a.displacement is vector quantity there fore
we combine the two direction
[tex] {c}^{2} = \sqrt{ {a}^{2} + {b}^{2} } [/tex]
[tex] {c}^{2 } = \sqrt{ {12}^{2} + {16}^{2} } [/tex]
[tex] {c}^{2} = \sqrt{400 } [/tex]
[tex]c = 20[/tex]
displacement is 20km to wards north
b:average speed
[tex]v = s \div t[/tex]
20/3=6.67
c: please type correctly