1. The 4s subshell should be filled before the 3d subshell because the 4s subshell is at lower energy than the 3d subshell.
Electrons fill the subshells in order of increasing energy.
2. To write the electron configuration for the Na^+ ion, which has ten electrons, follow these steps:
a. Begin with the lowest energy subshell, which is 1s.
b. Fill the subshells with electrons in increasing energy order: 1s, 2s, 2p, 3s, and so on.
c. Stop when you've added ten electrons.
The electron configuration for the Na^+ ion is: 1s^2 2s^2 2p^6
3. To write the electron configuration for the Br^- ion, which has thirty-six electrons, follow the same steps as above, but stop when you've added thirty-six electrons.
The electron configuration for the Br^- ion is: 1s^2 2s^2 2p^6 3s^2 3p^6 4s^2 3d^10 4p^6
To know more about electronic configuration, visit: https://brainly.com/question/30424681
#SPJ11
True/false : Unlike covalent bonds, which produce a crystal lattice, ionic bonds are formed between 2 individual atoms, giving rise to true, discrete molecules.
The given statement " Unlike covalent bonds, which produce a crystal lattice, ionic bonds are formed between 2 individual atoms, giving rise to true, discrete molecules" is false because Ionic bonds are not formed between two individual atoms.
Ions, which are atoms or molecules that have gained or lost electrons to become charged, come together to form ionic bonds rather than between two separate atoms.
An ionic bond forms a crystal lattice structure rather than a distinct molecule when one ion gives electrons to another ion. On the other hand, covalent bonds often develop between separate atoms that share electrons, leading to the development of distinct molecules.
It's crucial to remember that this generalisation is not always true, as some covalent substances, like silicon and diamond, can also form extended crystal lattice structures.
For such more question on molecules:
https://brainly.com/question/475709
#SPJ11
in one student's experiment the reaction proceeded at a much slower rate than it did in the other students' experiments. which of the following could explain the slower reaction rate? the students used a 1.5 m solution of hno3(aq) instead of 15.8 m solution of hno3(aq)
A lower concentration of a reactant can result in a slower reaction rate.
The concentration of a reactant in a solution can affect the rate at which a reaction proceeds. In this case, the student who used a 1.5 m solution of HNO₃(aq) may have observed a slower reaction rate compared to the other students who used a 15.8 m solution of HNO₃(aq).
The rate of a chemical reaction depends on several factors, including the concentration of reactants, the temperature of the reaction mixture, the surface area of any solids, and the presence of catalysts. The concentration of a reactant is particularly important because it determines the number of reactant particles available to react per unit volume of the solution. If the concentration is low, there will be fewer reactant particles colliding with each other, which can result in a slower reaction rate.
In this case, the student who used a 1.5 m solution of HNO₃(aq) may have had fewer HNO₃ molecules available to react compared to the other students who used a higher concentration of the acid. As a result, the reaction proceeded more slowly.
It's also important to note that the reaction rate may depend on other factors besides the concentration of HNO₃, such as the nature of the other reactants and the conditions under which the experiments were conducted.
To know more about reaction rate, refer to the link below:
https://brainly.com/question/30546888#
#SPJ11
Complete Question:
15) In one student's experiment the reaction proceeded at a much slower rate than it did in the other students' experiments. Which of the following could explain the slower reaction rate? O The student did not perform the experiment in the fume hood. O The student used a 1.5 M solution of HNO3(aq) instead of a 15.8 solution of HNO3(aq). O The student used a 3.00 g sample of the mixture instead of the 2.00 g sample that was used by the other students. In the student's sample the metal pieces were much smaller than those in the other students' samples. O The student heated the reaction mixture as the HNO3(aq) was added.
What is the number of elements for 2C3H5O2
There are a total of 3 different types of atoms (carbon, hydrogen, and oxygen) in this molecule, and the number of elements is 3
A molecule is the smallest particle of a chemical compound that retains its chemical properties. It consists of two or more atoms chemically bonded together through shared electrons to form a stable entity. The properties and behavior of a molecule are determined by its composition and the arrangement of its constituent atoms.
The chemical formula of a molecule indicates the types and number of atoms that comprise it. For example, water is a molecule composed of two hydrogen atoms and one oxygen atom, and its chemical formula is H2O. Molecules can be either simple or complex, and they can be found in various states of matter, including solid, liquid, and gas.
To learn more about Molecule visit here:
brainly.com/question/30465503
#SPJ4
for a certain chemical reaction, the standard gibbs free energy of reaction is . calculate the temperature at which the equilibrium constant . round your answer to the nearest degree.
Certain chemical reaction, the standard gibbs free energy of reaction is 298°C the temperature at which the equilibrium constant
To answer this question, we can use the relationship between Gibbs free energy and equilibrium constant:
ΔG° = -RT ln(K)
where ΔG° is the standard Gibbs free energy of reaction, R is the gas constant (8.314 J/mol·K), T is the temperature in Kelvin, and K is the equilibrium constant.
When the Gibbs free energy decreases, either the system's enthalpy or its entropy has increased, or both, depending on the situation. When G is negative, the reaction is spontaneous and will move in the direction that produces the most energy, which is typically heat or light.
Therefore, a drop in Gibbs free energy during a chemical reaction is proof that it is spontaneous and will continue on its own without outside help.
We can rearrange this equation to solve for T:
T = -ΔG° / (R ln(K))
Substituting the given values, we get:
T = -(-123.4 kJ/mol) / (8.314 J/mol K × ln(4.5))
T ≈ 298 K
Rounding to the nearest degree, we get:
T ≈ 298°C
Therefore, the temperature at which the equilibrium constant is 4.5 for this chemical reaction is approximately 298°C.
Learn more about Gibbs free energy here
https://brainly.com/question/30473370
#SPJ11
Dispersion forces are a type of _____ force that causes an attraction between molecules that results from a distortion of the _____ cloud that causes an uneven distribution of charge.
Dispersion forces are a type of intermolecular force that causes an attraction between molecules that results from a distortion of the electron cloud that causes an uneven distribution of charge.
All molecules have electrons that are in constant motion, and sometimes these electrons can accumulate on one side of the molecule, creating a temporary dipole moment.
This temporary dipole moment can then induce a dipole moment in a nearby molecule, causing an attraction between the two.
Hence, dispersion forces are a type of intermolecular force that results from temporary dipoles induced by the motion of electrons.
learn more about molecules click here:
https://brainly.com/question/475709
#SPJ11
Which of the following accurately describes the primary species in solution at point A on the titration curve for the titration of HF with NaOH? pH A) HF D B) HF and OH C) OH^- D) F
The primary species in solution at point A on the titration curve for the titration of HF with [tex]Na_{OH}[/tex] is [tex]HF_{}[/tex].
At the beginning of the titration, only the acid is present in the solution. As [tex]Na_{OH}[/tex] is gradually added, it reacts with the acid to form its conjugate base and water. The pH of the solution increases gradually until it reaches the equivalence point, where all of the acid has been neutralized by the base.
At point A, the solution is still acidic, but some of the acid has been neutralized by the added base. Therefore, the primary species in solution is still the acid, [tex]HF_{}[/tex], and not its conjugate base F or the hydroxide ion [tex]OH_{}[/tex]-.
[tex]HF_{}[/tex] is a weak acid, which means that it does not completely dissociate in water. Instead, it exists in equilibrium with its conjugate base, F-, and a small concentration of [tex]H_{3}O[/tex]+ ions.
[tex]Na_{OH}[/tex] is a strong base, which means that it completely dissociates in water to form Na+ and [tex]OH_{}[/tex]- ions. When [tex]Na_{OH}[/tex] is added to [tex]HF_{}[/tex], the [tex]OH_{}[/tex]- ions react with the [tex]H_{3}O[/tex]+ ions present in the solution to form water, which shifts the equilibrium of [tex]HF_{}[/tex] towards the F- ions.
As the titration progresses, more and more [tex]Na_{OH}[/tex] is added, which leads to a gradual increase in the pH of the solution. The pH at point A on the titration curve is still below 7, which means that the solution is still acidic. However, some of the acid has been neutralized by the added base, which is why the primary species in solution is [tex]HF_{}[/tex] and not [tex]H_{3}O[/tex]+.
As more [tex]Na_{OH}[/tex] is added, the pH continues to increase until it reaches the equivalence point, where all of the [tex]HF_{}[/tex] has been neutralized by the [tex]Na_{OH}[/tex]. At this point, the solution contains only the conjugate base F- and the excess [tex]Na_{OH}[/tex], and the pH is above 7.
The titration curve for the titration of [tex]HF_{}[/tex] with [tex]Na_{OH}[/tex] is different from that of a strong acid-strong base titration because of the weak nature of [tex]HF_{}[/tex]. The equivalence point is not as sharp as in a strong acid-strong base titration, and there is a region in the titration curve where the pH changes rapidly, known as the buffer region.
To know more about titration
brainly.com/question/31271061
#SPJ11
Atoms in a gem that aren't part of its essential chemical composition are called
Answer:
Trace elements are atoms in a gem that aren't a necessary component of that gem's chemical makeup. Because of this, the crystal's shape plays a significant role in the rating of rough. It influences how much weight is retained following a diet.
Explanation:
Lighters are usually fueled by butane (C4H10). When 1 mole of butane burns at constant pressure, it produces 2658 kJ of heat and does 3 kJ of work.âPart AWhat are the values of ÎHÂ and ÎEÂ for the combustion of one mole of butane?Express your answer using four significant figures.Part BExpress your answer using four significant figures.
Lighters are fueled by butane which is a hydrocarbon with the chemical formula C4H10. When 1 mole of butane burns at constant pressure, it produces 2658 kJ of heat and does 3 kJ of work. The values of ΔH and ΔE for the combustion of one mole of butane can be calculated using the first law of thermodynamics which states that the change in internal energy (ΔE) of a system is equal to the heat transferred (q) to the system minus the work (w) done by the system: ΔE = q - w.
For the combustion of one mole of butane, the heat produced is 2658 kJ and the work done is 3 kJ. Therefore, ΔE = 2658 kJ - 3 kJ = 2655 kJ. The enthalpy change (ΔH) can be calculated using the equation: ΔH = ΔE + PΔV, where P is the pressure and ΔV is the change in volume. Since the combustion is done at constant pressure, ΔH = ΔE + PΔV = 2655 kJ + 0 = 2655 kJ. Therefore, the values of ΔH and ΔE for the combustion of one mole of butane are 2655 kJ and 2658 kJ respectively. It is important to note that these values are for the complete combustion of butane in excess oxygen. If incomplete combustion occurs, the values of ΔH and ΔE will be different.
In conclusion, the combustion of butane produces a significant amount of heat energy which is used to fuel lighters. The values of ΔH and ΔE for the combustion of one mole of butane are 2655 kJ and 2658 kJ respectively. These values can be used to calculate the energy efficiency of butane-powered devices such as lighters.
For more information on combustion of butane see:
https://brainly.com/question/14317568
#SPJ11
PART OF WRITTEN EXAMINATION:
____ is a cathodic reactant
A) oxygen
B) amps
C) resistance
D) pH scale
The correct answer is A) oxygen. Oxygen is a cathodic reactant as it is reduced at the cathode during electrochemical reactions. In other words, it is the reactant that accepts electrons from the cathode, leading to the reduction of oxygen. This process is commonly seen in fuel cells and batteries, where oxygen reacts with the fuel to produce energy.
The Cathodic reactions are an essential part of many industrial and scientific processes. For example, in corrosion prevention, cathodic protection is used to protect metal structures from corrosion by making the metal cathodic and attracting the corrosion reaction towards it. In electroplating, cathodic reactions are used to deposit a layer of metal onto a substrate by reducing metal ions from the solution. Understanding cathodic reactions is crucial in electrochemistry, where reactions occur at electrodes that are either anodic (oxidation) or cathodic (reduction). Electrochemical reactions are governed by principles such as Faraday's law, which states that the amount of reactant consumed, or product generated in an electrochemical reaction is proportional to the amount of electrical charge that passes through the system. In conclusion, oxygen is a cathodic reactant that is essential in many electrochemical processes. Understanding the role of cathodic reactions is crucial in the fields of corrosion prevention, electroplating, and electrochemistry.
learn more about Cathodic here.
https://brainly.com/question/4052514
#SPJ11
2A1+3Ca(NO3)2 →3Ca + 2Al(NO3)3
If you are given 67g of Ca(NO3)2, what mass in grams of Al(NO₂), will be produced?
The mass of the required product that we have is 57.5 g.
What is the amount that is produced?We know that if we want to solve the problems that we have at hand then we have to use the stoichiometry of the reaction and that is where we would need the chemical reaction equation.
Now we know that;
2A1+3Ca(NO3)2 →3Ca + 2Al(NO3)3
Number of moles of Ca(NO3)2 = 67g /164 g/mol
= 0.41 moles
We know that;
3 moles of Ca(NO3)2 produces 2 moles of Al(NO3)3
0.41 moles of Ca(NO3)2 produces 0.41 * 2/3
= 0.27 moles
Mass of Al(NO3)3 = 0.27 moles * 213 g/mol
= 57.5 g
Learn more about stoichiometry:https://brainly.com/question/6755674
#spj1
The fissionable fuel in all US nuclear reactors is?
a. Plutonium
b. Thorium
c. Uranium
d. tritium
The correct answer is Uranium. The fissionable fuel used in most nuclear reactors in the United States is uranium. Specifically, the fuel used is usually enriched uranium, which means that the concentration of uranium-235 (the fissile isotope of uranium) has increased above its natural abundance in uranium ore.
When a uranium atom undergoes nuclear fission, it releases a large amount of energy in the form of heat, which can be used to generate electricity in a nuclear power plant. The fission process also releases neutrons, which can go on to cause additional fissions in nearby uranium atoms, creating a self-sustaining chain reaction.
While plutonium and thorium can also be used as nuclear fuels, they are not as commonly used as uranium in the United States. Tritium is not a fissionable fuel; it is a radioactive isotope of hydrogen that is sometimes used in nuclear weapons and as a tracer in scientific experiments.
Learn more about uranium, here:
brainly.com/question/30076595
#SPJ11
A 0.1 M solution of CH3COONa isbasicacidicneutralnot enough information
A 0.1 M solution of CH₃COONa is slightly basic.
Sodium acetate (CH₃COONa) is a salt of a weak acid (acetic acid, CH₃COOH) and a strong base (sodium hydroxide, NaOH). When sodium acetate dissolves in water, it dissociates into sodium ions (Na⁺) and acetate ions (CH₃COO⁻). The acetate ion can act as a weak base and react with water to produce hydroxide ions (OH⁻) and acetic acid:
CH₃COO⁻ + H2O ↔ CH₃COOH + OH⁻
The equilibrium of this reaction will shift to the right in a solution with a pH below the pKa of acetic acid (4.76), resulting in a slightly basic solution.
Since the concentration of CH₃COONa is given as 0.1 M and assuming complete dissociation of the salt, the concentration of acetate ions is also 0.1 M. Using the equation above, we can calculate the concentration of hydroxide ions produced:
[OH⁻] = [CH₃COO⁻] x K_b / [CH₃COOH]
where K_b is the base dissociation constant for the acetate ion (5.56 x 10⁻¹⁰).
Plugging in the values, we get:
[OH⁻] = (0.1 M) x (5.56 x 10⁻¹⁰) / (10⁻¹⁴/ 1.76 x 10⁻⁵ M)
[OH⁻] = 5.56 x 10⁻⁶ M
The resulting hydroxide ion concentration is greater than the concentration of hydronium ions in pure water (1 x 10⁻⁷M), indicating a slightly basic solution. Therefore, the answer is that a 0.1 M solution of CH₃COONa is slightly basic.
To know more about the CH₃COONa refer here :
https://brainly.com/question/28299796#
#SPJ11
which of the following are isoelectronic with s^2-? a. Ar b. b Ca2+ с. A13+ d. K
Isoelectronic species have the same number of electrons. To determine which option is isoelectronic with S^2-, let's first find the number of electrons in S^2-. Sulfur (S) has 16 electrons in its neutral state. With a 2- charge, it gains 2 extra electrons, making it have 18 electrons.
Now, let's compare the given options:
a. Ar (Argon) has 18 electrons in its neutral state, so it is isoelectronic with S^2-.
b. Ca2+ (Calcium ion) has 20 electrons in its neutral state. With a 2+ charge, it loses 2 electrons, making it have 18 electrons. Thus, it is isoelectronic with S^2-.
c. Al3+ (Aluminum ion) has 13 electrons in its neutral state. With a 3+ charge, it loses 3 electrons, making it have 10 electrons. It is not isoelectronic with S^2-.
d. K (Potassium) has 19 electrons in its neutral state. It is not isoelectronic with S^2-.
So, the species isoelectronic with S^2- are a. Ar and b. Ca2+.
Learn more about Isoelectronic here:
https://brainly.com/question/6807313
#SPJ11
which of the following outer electron configurations would you expect to belong to a reactive metal? check all that apply. which of the following outer electron configurations would you expect to belong to a reactive metal?check all that apply. ns2np6 ns2np5 ns2np4 ns1
The Reactive metals typically have outer electron configurations that allow them to easily lose electrons in chemical reactions. The configurations you provided are ns2np6. ns2np5 ns2np 4ns1 ns2np6 This configuration represents a noble gas, which has a full outer electron shell.
The Noble gases are stable and generally unreactive due to their complete valence electron shells. ns2np5 This configuration represents a halogen, which has 7 valence electrons. Halogens are very reactive non-metals, as they tend to gain an electron to complete their outer shell. ns2np4 This configuration represents a non-metal from group 16 (chalcogens) with 6 valence electrons. These elements tend to gain two electrons to complete their outer shell, making them reactive non-metals.4ns1 This configuration represents an alkali metal from group 1, which has 1 valence electron. Alkali metals are highly reactive metals because they can easily lose their single outer electron to achieve a stable electron configuration. Based on this analysis, the outer electron configuration that belongs to a reactive metal is ns1.
learn more about electron here.
https://brainly.com/question/28977387
#SPJ11
For A → Products, successive half-lives are observed at 10. 0, 20. 0 and 40. 0 minute intervals for an experiment in which [A]0 = 0. 10 M. Calculate [A] after another 80. 0 minutes (i. E. , t = 150 minutes
The concentration of A → products, successive half-lives are observed to be 10.0, 20.0, and 40.0 min for an experiment in which [ A ] 0 = 0.10 M at the following times,
a. 80.0 min = 0.0107 M.
b. 30.0 min = 0.0471 M
To solve this problem, we can use the following equation for a first-order reaction:
ln([A]t/[A]0) = -kt
where [A]t is the concentration of A at time t, [A]0 is the initial concentration of A, k is the rate constant, and t is time.
From the given half-lives, we can find the rate constant k as follows:
k = (0.693/t1/2)
where t1/2 is the half-life.
For the given experiment, we have:
k1 = (0.693/10.0) = 0.0693 [tex]min^{-1}[/tex]
k2 = (0.693/20.0) = 0.03465 [tex]min^{-1}[/tex]
k3 = (0.693/40.0) = 0.017325 [tex]min^{-1}[/tex]
a. To find the concentration of A at 80.0 min:
t = 80.0 min
[A]t = [A]0 × [tex]e^{(-kt)}[/tex] = 0.10 × [tex]e^{(-(0.069380.0 + 0.0346580.0 + 0.017325 * 80.0))}[/tex] = 0.0107 M
Therefore, the concentration of A at 80.0 min is 0.0107 M.
b. To find the concentration of A at 30.0 min:
t = 30.0 min
[A]t = [A]0 × [tex]e^{(-kt)}[/tex] = 0.10 × [tex]e^{(-(0.069330.0 + 0.0346530.0 + 0.017325 * 30.0)}[/tex]) = 0.0471 M
Therefore, the concentration of A at 30.0 min is 0.0471 M.
Learn more about half-lives at
https://brainly.com/question/30599798
#SPJ4
The question is -
For the reaction A → products, successive half-lives are observed to be 10.0, 20.0, and 40.0 min for an experiment in which [ A ] 0 = 0.10 M . Calculate the concentration of A at the following times.
a. 80.0 min
b. 30.0 min
Select the parameters that are required for proposing a valid reaction mechanism. Select all that apply.
-Elementary steps sum to overall balanced equation
-Physically reasonable elementary steps
-Correlation of rate law with experimental rate law
All of the options listed are required for proposing a valid reaction mechanism. The elementary steps must sum to the overall balanced equation, the steps must be physically reasonable, and the rate law must correlate with the experimental rate law.
To propose a valid reaction mechanism, you should consider the following parameters:
1. Elementary steps sum to overall balanced equation: This ensures that the individual elementary steps add up to form the overall reaction, and the mass and charge are balanced in the process.
2. Physically reasonable elementary steps: The proposed elementary steps should be feasible based on known physical and chemical principles, ensuring that the mechanism is realistic.
3. Correlation of rate law with experimental rate law: The rate law predicted by the proposed mechanism should match the experimentally observed rate law, indicating that the mechanism is consistent with the observed behavior of the reaction.
So, all three parameters are required for proposing a valid reaction mechanism.
to learn more about experimental rate law click here:
brainly.com/question/30705569
#SPJ11
Q1. What is the enthalpy change during the process in which 100.g of water at 50.0°C is cooled
to ice at -30 °C? Show your work to receive full credit. Specific heat of fusion of water = 6.01
kj/mol. Specific heat of ice = 2.03 J/g c.
The following equation is used to calculate the change in enthalpy that occurs when 100 g of water at 50.0 °C is cooled to ice at -30 °C: First, using the equation q = mcT, it is determined how much heat energy is needed to cool the water from 50.0°C to 0°C. q = (100 g)(4.18 J/g°C)(50.0°C-0°C) = 20900 J in this scenario.
Then, using the equation q = mL, where q is the heat energy, m is the mass of the water, and L is the specific heat of fusion of water, it is determined how much heat energy is needed to turn the water into ice at 0°C. That is. q = (100 g)(6.01 kJ/mol) = 601 kJ in this instance.
The equation q = mcT, where q is the heat energy, m is the mass of the ice, c is the specific heat of ice, and T is the change in temperature, is used to determine the amount of heat energy needed to cool the ice from 0°C to -30°C. q = (100 g)(2.03 J/g°C)(0°C-30°C) = -6090 J in this scenario.
Therefore, the sum of the three heat energy calculations, i.e. 20900 J + 601 kJ - 6090 J = 54110 J, is used to compute the enthalpy change throughout the process in which 100 g of water at 50.0 °C is cooled to ice at -30 °C.
Learn more about enthalpy at:
https://brainly.com/question/16720480
#SPJ1
Calculate the pressure in atm needed to compress 1 kilogram of water from volume 1.00litre to volume 0.99 litre.Hint: You will need to use the bulk modulus for water: B=2.0x10^9 Pa
The pressure needed to compress 1 kilogram of water from volume 1.00 litre to volume 0.99 litre is 197 atm.
To calculate the pressure needed to compress 1 kilogram of water from volume 1.00 litre to volume 0.99 litre, we can use the formula for bulk modulus:
B = -V(dp/dV)
where B is the bulk modulus, V is the initial volume, dp is the change in pressure, and dV is the change in volume.
We can rearrange this formula to solve for dp:
dp = -(B/V) * dV
Substituting the given values, we get:
dp = -(2.0x10^9 Pa / 1.00 L) * (0.01 L)
dp = -2.0x10^7 Pa
Since we want to find the pressure needed to compress the water, we need to use the negative of this value:
dp = 2.0x10^7 Pa
Finally, we can convert this pressure to atm by dividing by the standard atmospheric pressure of 1 atm:
pressure = dp / (1 atm / 101325 Pa)
pressure = 197 atm
To know more about pressure and compression : https://brainly.com/question/28012687
#SPJ11
which of these three quantities is proportional to concentration? absorbance molar absorptivity transmittance
Absorbance is the quantity that is proportional to concentration among the three options provided, which also include molar absorptivity and transmittance.
According to the Beer-Lambert Law, absorbance (A) is directly proportional to the concentration (c) of a solution. The relationship can be expressed as A = εcl, where ε is the molar absorptivity (a constant for a particular substance), c is the concentration of the solution, and l is the path length of light through the solution. As concentration increases, absorbance also increases, indicating that more light is being absorbed by the solution.
Molar absorptivity, on the other hand, is a constant that depends on the substance being measured and the wavelength of light used. It indicates how well a substance absorbs light at a particular wavelength and does not vary with concentration.
Transmittance (T) is the fraction of light that passes through a solution without being absorbed. It is related to absorbance, but not directly proportional to concentration. As the concentration of a solution increases, transmittance usually decreases due to increased light absorption.
In summary, absorbance is the quantity that is proportional to concentration among the three options. Molar absorptivity is a constant property of a substance, and transmittance is related to absorbance but not directly proportional to concentration.
To know more about absorbance, refer to the link below:
https://brainly.com/question/13492847#
#SPJ11
if 2.86 moles of sodium hydroxide were added to water to create a solution that is 0.858 M, what is the volume of the solution?
Calculate the pressure exerted by 0.25 moles of chlorine gas in a volume of 5.00 L at 37°C using the ideal gas equation.
atm
Calculate the pressure exerted by 0.25 moles of chlorine gas in a volume of 5.00 L at 37°C using the van der Waals equation.
Answer:
To calculate the pressure exerted by 0.25 moles of chlorine gas in a volume of 5.00 L at 37°C using the ideal gas equation, we can use the following formula: PV = nRT
Where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin. We first need to convert the temperature from Celsius to Kelvin by adding 273.15 to the temperature:
T = 37°C + 273.15 = 310.15 K
Substituting the values given in the problem, we get:
P(5.00 L) = (0.25 mol)(0.08206 L·atm/mol·K)(310.15 K)
Solving for P, we get: P = 3.15 atm
Therefore, the pressure exerted by 0.25 moles of chlorine gas in a volume of 5.00 L at 37°C using the ideal gas equation is 3.15 atm.
To calculate the pressure using the van der Waals equation, we need to use the following formula: (P + a(n/V)^2)(V - nb) = nRT
Where a and b are constants specific to the gas, and n/V is the molar density. For chlorine gas, a = 6.49 L^2·atm/mol^2 and b = 0.0562 L/mol.
We can calculate n/V as follows: n/V = 0.25 mol / 5.00 L = 0.05 mol/L
Substituting the values given in the problem, we get: (P + 6.49 L^2·atm/mol^2 (0.05 mol/L)^2)(5.00 L - 0.0562 L/mol (0.25 mol)) = (0.25 mol)(0.08206 L·atm/mol·K)(310.15 K)
Simplifying and solving for P, we get:
P = 3.11 atm
Therefore, the pressure exerted by 0.25 moles of chlorine gas in a volume of 5.00 L at 37°C using the van der Waals equation is 3.11 atm.
Explanation:
ask me more qstn on sn ap = m_oonlight781
Please help on question 9
Ethanol (structure b) would have a higher boiling point because it able to form more hydrogen bonds than diethyl ether (structure a)
How does polarity affect boiling point?Through its effect on intermolecular forces, polarity influences boiling point. Intermolecular forces, such as those that govern a substance's boiling point, are the attracting or repulsive interactions that exist between molecules.
Oxygen molecule has London dispersion forceswater has hydrogen bondsHBr has dipole interactionLearn more about boiling point:https://brainly.com/question/31218627
#SPJ1
what can be said about the favorability of the overall reaction? view available hint(s)for part b what can be said about the favorability of the overall reaction? this reaction is thermodynamically favorable. this reaction is thermodynamically neutral. this reaction is thermodynamically unfavorable. there is not enough information to determine thermodynamic favorableness.
The thermodynamic favorableness of a reaction can be determined by looking at the sign of the ΔG value. If the ΔG value is negative, the reaction is thermodynamically favorable, meaning that the products are more stable than the reactants.
If the ΔG value is positive, the reaction is thermodynamically unfavorable, meaning that the products are less stable than the reactants. If the ΔG value is zero, the reaction is thermodynamically neutral, meaning that the reactants and products are equally as stable.
Without knowing the ΔG value of a reaction, it is impossible to determine whether the reaction is thermodynamically favorable, unfavorable, or neutral. Knowing the ΔG value is important because it allows us to determine whether a reaction will occur spontaneously or not.
Know more about thermodynamic here
https://brainly.com/question/1368306#
#SPJ11
calculate the pressure exerted by 2.50 moles of co2 confined in a volume of 5.00 l at 450 k. compare the pressure with that predicted by the ideal gas equation'
To calculate the pressure exerted by 2.50 moles of CO2 confined in a volume of 5.00 L at 450 K, we can use the ideal gas equation:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.
First, we need to calculate the value of R. We can use the following equation:
R = PV/nT
where P, V, n, and T are the values given in the problem.
R = (P)(5.00 L)/(2.50 moles)(450 K)
R = 0.074 L atm/mol K
Now, we can rearrange the ideal gas equation to solve for P:
P = nRT/V
P = (2.50 moles)(0.074 L atm/mol K)(450 K)/5.00 L
P = 8.425 atm
Therefore, the pressure exerted by 2.50 moles of CO2 confined in a volume of 5.00 L at 450 K is 8.425 atm.
To compare this pressure with that predicted by the ideal gas equation, we can use the following equation:
P = (n/V)kT
where k is the Boltzmann constant.
P = (2.50 moles/5.00 L)(1.38 x 10^-23 J/K)(450 K)/101,325 Pa
P = 7.775 x 10^-2 atm
As we can see, the pressure predicted by the ideal gas equation is much lower than the actual pressure calculated above. This is because, at high pressures and low volumes, real gases deviate from ideal gas behavior due to intermolecular forces and the finite size of gas molecules.
Learn more about gas molecules here:
https://brainly.com/question/29848914
#SPJ11
A sample of brass with a mass of 28. 75 grams changes from an initial temperature of 19. 8°C
to a final temperature of 78. 4°C. Calculate the change in thermal energy, and state whether
heat was gained or lost
The change in thermal energy for this process is 3,097.26 J and the brass sample gained heat.
To calculate the change in thermal energy, we need to use the equation:
[tex]$\Delta Q = mC \Delta T$[/tex]
where:
[tex]$\Delta Q$[/tex]is the change in thermal energy
[tex]$m$[/tex]is the mass of the sample
[tex]$C$[/tex] is the specific heat capacity of brass
[tex]$\Delta T$[/tex] is the change in temperature
The specific heat capacity of brass is typically around 0.38 J/g°C.
Plugging in the given values, we get:
[tex]$\Delta Q = (28.75 \text{ g}) \times (0.38 \text{ J/g°C}) \times (78.4°C - 19.8°C) = 3,097.26 \text{ J}$[/tex]
Since the temperature increased, the sample gained thermal energy. Therefore, the change in thermal energy for this process is 3,097.26 J and the brass sample gained heat.
Learn more about thermal energy
https://brainly.com/question/18989562
#SPJ4
in the second step of the reaction, the diazonium ion reacts with triclosan to form a colored complex. identify the lewis acid and lewis base in this reaction.
The Lewis acid in this reaction is the diazonium ion, which accepts an electron pair due to its positively charged nitrogen atom. Triclosan serves as the Lewis base, donating an electron pair through its carbonyl oxygen atom, leading to the formation of a colored complex.
In the second step of the reaction involving the formation of a colored complex between the diazonium ion and triclosan, a Lewis acid-base interaction occurs. In this context, a Lewis acid is a molecule or ion that can accept an electron pair, while a Lewis base is a molecule or ion that can donate an electron pair.
In this specific reaction, the diazonium ion acts as the Lewis acid. The diazonium ion, which typically has the general formula R-N≡N⁺, possesses a positively charged nitrogen atom. This positive charge makes it an electron-pair acceptor, allowing it to function as a Lewis acid.
On the other hand, triclosan is the Lewis base in this reaction. Triclosan is an organic compound with the formula C₁₂H₇Cl₃O₂. It contains an oxygen atom that is part of a carbonyl group (C=O). The oxygen atom has two lone pairs of electrons, which makes it a suitable electron-pair donor, thus categorizing triclosan as a Lewis base.
To know more about Lewis acid-base, refer to the link below:
https://brainly.com/question/14861040#
#SPJ11
how many moles of water will form when 4mol of hydrogen gas are allowed to react with 4mol of oxygen gas? provide your answer below:
The number of moles of water that will be formed when 4mol of hydrogen gas are allowed to react with 4mol of oxygen gas is 2 moles.
The balanced chemical equation for the reaction between hydrogen gas and oxygen gas to form water is:
2H₂ + O₂ -> 2H₂O
This equation tells us that 2 moles of hydrogen gas react with 1 mole of oxygen gas to form 2 moles of water.
If 4 moles of hydrogen gas are allowed to react with 4 moles of oxygen gas, we can use the balanced equation to determine how much water will be formed. Since 2 moles of hydrogen gas are required to react with 1 mole of oxygen gas to form 2 moles of water, we have twice as much hydrogen gas as we need. This means that all of the oxygen gas will be used up and 2 moles of water will be formed.
In summary, when 4 moles of hydrogen gas are allowed to react with 4 moles of oxygen gas, 2 moles of water will be formed according to the balanced chemical equation. It is important to note that the amount of water formed depends on the amount of hydrogen and oxygen gases available for the reaction.
Learn more about balanced chemical equation here: https://brainly.com/question/26694427
#SPJ11
Based on the solubility graph above, which of the following substances is the mos
soluble in water at 40° C?
AKCI
B KNO3
C NaCl
D NH3
The compound that is the most soluble at 40° C is KNO3. Option B
What is the solubility graph?A visual representation of a substance's solubility at various temperatures is a solubility graph. The greatest amount of a solute that may dissolve in a given amount of solvent at a particular temperature, or the saturation point, is depicted.
Typically, the graph has two axes: an x-axis for temperature (in degrees Celsius or Fahrenheit) and a y-axis for solubility (in grams of solute per 100 grams of solvent).
Learn more about solubility graph:https://brainly.com/question/11147728
#SPJ1
Use curved arrows to show the movement of electrons in each equation. Based on the information gathered in (1a), draw the product for the halogenation reaction given below when methyl cyclohexane is subjected to free radical bromination (0.5 point) Now draw the complete electron arrow pushing mechanism for it. (3 points)
The process verbally for the free radical bromination of methyl cyclohexane. In the propagation steps, the arrows will show the breaking of bonds and the formation of new ones between the reacting species.
1. Initiation:
- The bromine molecule (Br2) absorbs light energy and undergoes homolytic cleavage, resulting in the formation of two bromine radicals (Br•).
2. Propagation:
- First step: A bromine radical (Br•) reacts with methyl cyclohexane, abstracting a hydrogen atom, forming a cyclohexyl-methyl radical and HBr.
- Second step: The cyclohexyl-methyl radical reacts with another bromination molecule (Br2), causing the movement of electrons from the radical to one of the bromine atoms. This results in the formation of bromomethyl cyclohexane and another bromine radical (Br•), which can perpetuate the chain reaction.
3. Termination:
- Two radicals, either of the same or different species, combine to form a stable molecule, terminating the reaction.
For the complete electron arrow-pushing mechanism, imagine curved arrows indicating the movement of electrons during each reaction step. In the propagation steps, the arrows will show the breaking of bonds and the formation of new ones between the reacting species.
Learn more about bromination here
https://brainly.com/question/31566244
#SPJ11
use a sheet of paper to answer the following question. take a picture of your answers and attach to this assignment. from what aldehyde or ketone could each of the following be prepared by reduction with nabh4 or lialh4?
Both sodium borohydride (NaBH₄) and lithium aluminum hydride (LiAlH₄) are common reducing agents used in the reduction of aldehydes and ketones to produce alcohols. The difference between the two lies in their reactivity, where LiAlH₄ is more reactive than NaBH₄.
To determine the starting aldehyde or ketone that can be reduced by NaBH₄ or LiAlH₄, you would need to consider the corresponding alcohol produced by the reduction. Once you identify the alcohol, you can then deduce the initial aldehyde or ketone. For example, if the resulting alcohol is 1-propanol, you can infer that the starting compound was propanal (an aldehyde).
Remember that NaBH₄ selectively reduces aldehydes and ketones, while LiAlH₄ can reduce a broader range of functional groups, including carboxylic acids and esters. To determine which reducing agent is suitable, consider the reactivity and compatibility of the functional groups present in the molecule.
In summary, to identify the starting aldehyde or ketone for a given reduction reaction with NaBH₄ or LiAlH₄, analyze the resulting alcohol and consider the reactivity of the reducing agent. This will allow you to deduce the appropriate initial compound.
To know more about reducing agent, refer to the link below:
https://brainly.com/question/17206144#
#SPJ11