HELP HW!!!!! IF U CAN SOLVE ONE AT LEAST I WILL CROWN U BRAINLIEST ( I’m so bad at this plz helppp)

HELP HW!!!!! IF U CAN SOLVE ONE AT LEAST I WILL CROWN U BRAINLIEST ( Im So Bad At This Plz Helppp)

Answers

Answer 1

Answer:

Q = I * t = 2 Coulomb / sec * 1000 sec = 2000 Coulombs transferred

E (energy) = V * Q = I * t * 240 V

E = 240 J / Coul * 2000 Coul = 480,000 Joules

Next question:

Total voltage drop in circuit = 6.5 V + 4.5 V = 11 V

So the power supply must supply 11 V


Related Questions

How many significant figures? 53,598 m/sec

Answers

Answer:

This has 5 significant figures.

True or False: The definition of flexibility is the ability of a joint or a series of joints to move through an unrestricted, pain-free range of motion.

Answers

Answer:

true

Explanation:

hope I helped a bit

Imagine you are rolling a marble down a wooden ramp for an experiment. What are some variables you can experiment with to increase the velocity of the marble? *

Answers

Answer:

Explanation:

In free fall, gravity constantly accelerates an object (increases its velocity)—until it hits terminal velocity. Specifically, gravity increases a falling object's velocity by 9.8 meters per second (m/s) with every passing second. (Whereas velocity is measured in m/s, acceleration is measured in meters per second squared, or m/s2.) How does this constant acceleration affect the distance that an object travels over time? In this experiment you will roll a marble down a ramp to find out.

By adjusting the ramp's height, width, or inclination, you can increase the velocity at which the marble travels down it.

What is ramp?

As a tool for lifting or lowering a load, an inclined plane, sometimes referred to as a ramp, is a flat supporting surface that is tilted at an angle from the vertical direction with one end higher than the other.

One of the six traditional simple devices that Renaissance scientists defined is the inclined plane. Heavy weights are transported over vertical obstacles using inclined planes. Examples include a ramp used to load cargo into a truck, a pedestrian ascending a ramp, or an automobile or train ascending an incline.

Less force is needed to push an object up an inclined plane than to lift it straight up, but the distance travelled is greater.

Learn more about ramp here:

https://brainly.com/question/13492520

#SPJ2

dimensional formula of energy​

Answers

Answer:

[M L2 T-2]

Explanation:

hope this is what you're looking for.

[M L2 T2] SI Symbol: J

PLEASE HELP, WILL MARK BRAINLIEST
What objects exert the attractive force of gravity?
(1 Point)
Anything that has mass
Only planets, moons and stars
Only the Earth and the Sun
Only objects the size of the Earth or larger.

Answers

Answer:

Anything that has mass.

Explanation:

Answer: Anything that has mass.

Explanation:

which refers to the distance between two crests or two troughs on a transverse wave?
wavelength
amplitude
frequency
hertz

Answers

Answer:

wavelength

Explanation:

the definition of wavelength is the distance from one Crest to the next crest,or one trough to the next trough

The phenomenon that refers to the distance between two crests or two troughs on a transverse wave is wavelength.

What is wavelength?

Wavelength is simply defined as the distance between successive crests of a wave, particularly in a sound.

In conclusion, wavelength refers to a traveling particle.

Read more about Wave

https://brainly.com/question/3004869

Which force is the strongest force inside an atom?
O A. Strong nuclear
B. Electromagnetic
C. Gravity
D. Weak nuclear

Answers

Inside an atom, the strongest force is the Strong Nuclear Force, indicated by option A.

The strong nuclear force is one of the fundamental forces of nature and plays a crucial role in binding the subatomic particles, specifically protons and neutrons, within the atomic nucleus.

The strong nuclear force is responsible for overcoming the electrostatic repulsion between positively charged protons in the nucleus. It acts over extremely short distances, on the order of femtometers (10^-15 meters), and is characterized by its strength and short range. It is about 100 times stronger than the electromagnetic force, which is responsible for the interaction between charged particles.

The electromagnetic force, option B, is the second strongest force inside an atom. It is responsible for the interaction between charged particles, such as electrons and protons. The electromagnetic force is involved in holding the electrons in orbit around the nucleus and determines the chemical properties of atoms.

Gravity, option C, is the weakest force among the fundamental forces. While gravity plays a significant role on a macroscopic scale, such as the gravitational attraction between planets or objects on Earth, its influence at the atomic level is negligible compared to the strong nuclear and electromagnetic forces.

The weak nuclear force, option D, is another fundamental force, but it is responsible for processes such as radioactive decay and neutrino interactions. While it is involved in certain nuclear reactions, it is not as strong as the strong nuclear force.

In summary, the strong nuclear force is the strongest force inside an atom, overcoming the electrostatic repulsion between protons and binding the atomic nucleus together. Option A.

For more such questions on Strong Nuclear Force visit:

https://brainly.com/question/4217736

#SPJ8

Please fast ?????????

Answers

Answer:

Explanation:

Kinetic

PLEASE HURRY!

Zach listed the process of how laser beams are produced with crystals.

A flashlamp pumps energy through the crystal.
Atoms in the crystal absorb and then release some of the energy as light.
Light bounces off mirrors and occasionally bounces off crystal atoms, increasing in energy.
Some light escapes the tube through the highly reflective mirror, forming a concentrated beam.

Which best describes Zach’s error?

The crystal pumps energy through the flashlamp; the flashlamp does not pump energy through the crystal.
The atoms in the crystal do not release energy; they only absorb energy.
Light does not bounce off mirrors; it focuses through glass lenses.
Light escapes through the partially reflective mirror, not the highly reflective mirror.

Answers

The crystal pumps energy through the flashlamp; the flashlamp does not pump energy through the crystal best describes Zach’s error.

What is a laser?

A device that uses stimulated emission of photons from excited atoms or molecules to produce a strong beam of coherent monochromatic light is a laser.

When electrons in optical materials like glass, crystal, or gas absorb energy from an electrical current or light, a laser is formed.

The increased energy excites the electrons, causing them to migrate from a lower-energy orbit around the nucleus to a higher-energy orbit.

The crystal pumps energy through the flashlamp; the flashlamp does not pump energy through the crystal. This statement is incorrect.

Hence Option A best describes Zach’s error.

To learn more about the laser refer to the Link ;

https://brainly.com/question/14783882

Answer:

D. Light escapes through the partially reflective mirror, not the highly reflective mirror.

Explanation:

edge 2022, I took the test.

Can someone please help me on this?

Answers

Answer:

80

Explanation:

To decorate for a party, Simon needs 1,850 centimeters of colorful streamers. If the ratio of meters to centimeters is 1 : 100, how many meters of streamers does he require?

A.
18,500 meters
B.
185 meters
C.
18.5 meters
D.
1.85 meters

Answers

C because 1,850 divided by 100 is 18.50 but since zeros do not matter in decimals ( unless it is money ) we can removes the zero making it 18.5 meters

convert 9.2 km to m​

Answers

Answer:

9,200 m

Explanation:

1 kilometer = 1000 meters so if there is 9 kilometers then it is 9000 meters, then .2 kilometer is equal to 200 meters. Add the numbers together to get 9,200 meters


If you apply a net force of 3 N on 100g -box, what is the acceleration of
the box? *
30 m/s/s
20 m/s/s
10 m/s/s
5 m/s/s

Answers

Answer:

I believe the correct answer is 30m/s/s

Please help A.S.A.P
If the bands in an igneous rock are dark. What kind of magma was present when it was formed?

Answers

Answer:

The magma, molten rock under the surface, and lava (molten rock on the surface) harden into igneous rock. The igneous rock then breaks apart over time through the process of weathering.

Explanation:

define the word prism

Answers

Answer:

a polyhedron with two polygonal faces lying in parallel planes and with the other faces parallelograms

If the Mass Number is the sum of the protons and neutrons in an atom, what is
the mass number of

Answers

Answer:

It's 31

Explanation:

add 15 and 16

a train starting from a distance of velocity of 90 km.h
-1 in 10 minutes assuming that the acceleration is uniform find the acceleration and the distance travelled by the train for attending the velocity​

Answers

To make this problem solvable and you can get the help you need, I'll complete and arrange some data.

Answer:

Acceleration: [tex]0.0417\ m/s^2[/tex], Distance=7,500 m

Explanation:

Uniform Acceleration Motion

It's a type of motion in which the velocity of an object changes uniformly over time.

Being a the constant acceleration, vo the initial speed, vf the final speed, and t the time, the following relation applies:

[tex]v_f=v_o+at\qquad\qquad [1][/tex]

The distance traveled by the object is given by:

[tex]\displaystyle x=v_o.t+\frac{a.t^2}{2}\qquad\qquad [2][/tex]

Using the equation [1] we can solve for a:

[tex]\displaystyle a=\frac{v_f-v_o}{t}\qquad\qquad [3][/tex]

The problem will be rewritten as follows:

A train starting from rest reaches a velocity of 90 km/h in 10 minutes. Assuming that the acceleration is uniform, find the acceleration and the distance traveled by the train for attending the velocity​.

Let's take the relevant data:

vo=0

vf=90 Km/h*1000/3600 = 25 m/s

t = 10 minutes = 10*60 = 600  seconds

Now compute the acceleration by using [3]:

[tex]\displaystyle a=\frac{25-0}{600}=0.0417[/tex]

[tex]a=0.0417\ m/s^2[/tex]

Finally, compute the distance:

[tex]\displaystyle x=0*600+\frac{0.0417\cdot 600^2}{2}[/tex]

[tex]x=7,500\ m[/tex]

Note: We used the value of the acceleration with more precision than shown.

Acceleration: [tex]\mathbf{0.0417\ m/s^2}[/tex], Distance=7,500 m

Forces may cause an object to change ____ if it is unable to move

Answers

Answer:

Motion

Acceleration is the change of velocity per unit time, so if there is no force, all we know is that the acceleration is zero. Therefore, the velocity is not changing. If the object was already moving, then it will just keep moving. So, the object can be moving even when there is no force applied to it.

Forces may cause an object to change its state if it is unable to move. The force make the object to move from its state of rest.

What is force?

Force is an external agent acting on an object to deform it or to change it state of rest or motion. There are various kinds of forces such as gravitational force, nuclear force, magnetic force, frictional force etc.

Force is a vector quantity thus, it is characterised by its magnitude and direction. According to Newton's first law of motion, an object will continue in its state or motion or rest until an external force acts on it.

Therefore, force changes the state of an object. Force is dependant on the mass of the object. Greater the mass, greater will be the force required to move the object from stationary to stop it from motion.

According to second law of motion, force is the product of mass and acceleration of the object. Hence, force accelerates the body and a change in force changes the acceleration of the object.

To find more on force, refer here:

https://brainly.com/question/28875770

#SPJ2

Technological design leads to the development and innovation of new technologies.

Which statements represent innovation? Check all that apply.

Solar panels have increased in efficiency over the past 20 years.

The Sun is the primary source of energy for the solar system.

Alternative energy sources are one method for meeting energy needs.

Amore aerodynamic automobile uses less fuel.

Natural selection ensures that only the fittest survive.

Answers

Answer:

Solar panels have increased in efficiency over the past 20 years.

Alternative energy sources are one method for meeting energy needs.

Amore aerodynamic automobile uses less fuel.

Explanation:

Innovation is defined as the introduction or development of something new.  Innovation is an idea that is transformed into reality using technology and knowledge.

Statements that represent innovation are:

Using solar panels with more efficiency is an innovation because earlier it was less efficient but using knowledge and technology, they created a solar panel with increased efficiency.The use of alternative energy methods is an innovation because no one has thought before that they can use any other alternative sources of energy. for example: use of water to generate electricity rather than only drinking. Amore aerodynamic automobile uses less fuel. It is innovative to make a device that uses less fuel in comparison to other automobiles and it is an innovation with advantages to natural resources and the environment.

Hence, the correct options are: "A, C, and D".

In the desert air, sound travels at 358 meters per second (m/s). In the polar air, sound travels at 330 meters per
second (m/s). What can you conclude from this information?
A - The speed of sound is constant.
B - Sound waves travel fastest in a vacuum.
C-The temperature of the air affects the speed of sound.
D-Sound waves travel at the same speed everywhere on Earth.
Please provide your answer below using CER
1. Claim: What is your choice for the correct answer?
2. Evidence: What evidence did you observe from the test-like question that made you decide on your answer?
3. Reasoning: Provide an elaboration on your evidence, possible prior knowledge about your claim.

Answers

Answer:

The correct option is;

C. The temperature of the air affects the speed of sound

Explanation:

The information given are;

The speed with which sound travels in the desert air = 358 m/s

The speed with which sound travels in the polar air = 330 m/s

The major difference between the desert air and the polar air is that the temperature of the desert air is hotter than the temperature of the air in the polar region. Therefore the speed of sound is affected by the air temperature.

The equation that gives the relationship of the speed of sound in air, [tex]v_{air}[/tex], to temperature is presented as follows;

[tex]v_{air} = 331\frac{m}{s} \times \sqrt{\dfrac{T_K}{273 K} } = 331\frac{m}{s} \times \sqrt{1 + \dfrac{T_{^{\circ}C}}{273 ^{\circ} C} }[/tex]

Which shows that the speed of sound in air, [tex]v_{air}[/tex], rises as the temperature of the air rises.

Where;

[tex]T_{^{\circ}C}[/tex] = The temperature of the air in degrees Celsius

[tex]T_K[/tex] = The temperature of the air in degrees Kelvin.

Your mother has called you on your cell phone and asked you to pick up a few items at the grocery store on your way home. As you heard your mother state each item, which process transferred this information from your sensory memory to your short-term memory so you could jot each grocery item down?

Answers

Answer:

Encoding

Explanation:

Encoding is the initial learning of information. Encoding is the process of passing new information coming from sensory input  into our brain so that it can be easily retrievable. In a nutshell, it is the sum total of the processes by which external information such as the list of items your mother asked you to pick up at the grocery store to be converted into a manner that can be stored within the brain and recalled later from long-term memory.

Encoding has to do with transferring external stimuli into short term and subsequently long-term memory.

. Exercises that specifically prepare the muscles for active movements

Answers

Answer:

Dynamic Stretching

Explanation:

Dynamic Stretching: Dynamic stretches are controlled movements that prepare your muscles, ligaments and other soft tissues for performance and safety.

Answer:

Stretching such as toe touches

The two objects have different masses, the more massive object pulls with a greater force. TRUE OR FALSE?

Answers

Answer:

on earth yes, but in space no because there is no gravity

Explanation:

plz can i have some points

The force exerted by an object depends on the mass of the object. Greater mass results in greater force. Hence, the statement is true.

What is force?

Force is an external agent acts on a body to change the substance from the state of rest or motion. There are various kinds of force such as nuclear force, magnetic force, frictional force etc.

According to Newton's law of motion force in a moving body is the product of its mass and acceleration. Hence, force is directly proportional to mass and acceleration and an increase in these quantities will increase the force exerted by the body.

Thus, greater force is needed to a move a body with greater mass. If two objects of different masses exerts force each other, the greater force will be exerted by the massive body.

To find more on force, refer here:

https://brainly.com/question/13191643

#SPJ3

what are some solutions to global temperature changes?
help asap​

Answers

Answer:

Power your home with renewable energy.

Weatherize, weatherize, weatherize.

Invest in energy-efficient appliances.

Reduce water waste.

Actually eat the food you buy—and make less of it meat.

Explanation:

Acceleration is the rate of change in the speed of an object. To determine the rate of acceleration, you use the formula below. The units for acceleration are meters per second per second or m/s2.

Answers

Explanation:

Acceleration is the rate of change in the speed of an object. If initial and final speed are v₁ and v₂. It changes speed in time t. Its formula is given by :

[tex]a=\dfrac{v_2-v_1}{t}[/tex]

The problem is "A skater increases her velocity from 2.0 m/s to 10.0 m/s in 3.0 seconds. What is the skater’s acceleration? "

In this problem,

v₁ = 2 , v₂ = 10 m/s and t = 3 s

Acceleration of the object,

[tex]a=\dfrac{10-2}{3}\\\\a=2.67\ m/s^2[/tex]

So, the acceleration of the skater is [tex]2.67\ m/s^2[/tex].

PLEASE HELP

Which object has the least average speed?

A. object A
B. object B
C. object C
D. object D

Answers

Answer:

D

Explanation:

I could be wrong, But I'm pretty sure it's D

How many layers of data can a DVD store?
3
2
4
1
1

Answers

Answer:

Capacidad de almacenamiento ofrecida por los DVD

Hay que mencionar que es posible conseguir DVD de una o dos capas. Los DVD que cuentan con una capa son capaces de almacenar aproximadamente 4.7GB de datos, mientras que los de doble capa ofrecen la posibilidad de almacenar alrededor de 8.5GB

Explanation:

Answer:

4 layers

Explanation:

i took the quiz

An object is moving back and forth on the x-axis according to the equation x(t) = 3sin(20πt), t> 0, where x(t) is measured in cm and t in seconds. Give decimal answers below. (a) How many complete back-and-forth motions (from the origin to the right, back to the origin, to the left and finally back to the origin) does the object make in one second? (b) What is t the first time that the object is at its farthest right? (c) At the time found in part (b), what is the object's velocity? (d) At the time found in part (b), what is the object's acceleration?

Answers

Answer:

a.) 10Hz

b.) 0.1 s

c.) 187.4 m/s

d.) -412.6 m/s^2

Explanation:

Given that an object is moving back and forth on the x-axis according to the equation x(t) = 3sin(20πt), t> 0, where x(t) is measured in cm and t in seconds. Give decimal answers below.

(a) How many complete back-and-forth motions (from the origin to the right, back to the origin, to the left and finally back to the origin) does the object make in one second?

from the equation given,  the angular speed w = 20π

but w = 2πf

where f = frequency.

substitute w for 20π

20π = 2πf

f = 20π/2π

f = 10 Hz

(b) What is t the first time that the object is at its farthest right?

since F = 1/T

T = 1 / f

T = 1/10

T = 0.1 s

Therefore, the t of  first time that the object is at its farthest right is 0.1 s

(c) At the time found in part (b), what is the object's velocity?

The velocity can be found by differentiating the equation;

x(t) = 3sin(20πt)

dx/dt = 60πcos(20πt)

where dx/dt  = velocity V

V = 60πcos(20π * 0.1)

V = 187.4 m/s

(d) At the time found in part (b), what is the object's acceleration?

to get the acceleration, differentiate equation  V = 60πcos(20πt)

dv/dt = -1200πSin(20πt)

dv/dt = acceleration a

a = -1200πSin(20πt)

substitute t into the equation

a = -1200πSin(20π * 0.1)

a = - 412.6 m/s^2

The type of motion the object undergoes that consist of a back-and-forth

movement that is repetitive is a simple harmonic motion.

The correct responses are;

(a) Number of complete back-and-forth motions per second is 10(b) The first time is after 0.025 seconds(c) Velocity is 0(d) Acceleration is approximately -11843.53 m/s²

Reasons:

The equation that represents the motion of the object is x(t) = 3·sin(20·π·t)

Where;

t ≥ 0

x(t) is in cm, and t is in seconds.

(a) The general sine function is y = A·sin(B·(t - C) + D

[tex]\mathrm{The \ period \ P} = \dfrac{2 \cdot \pi}{B}[/tex]

By comparison, we have;

B = 20·π

Therefore;

[tex]P = \dfrac{2 \cdot \pi}{20 \cdot \pi} = \dfrac{1}{10} = 0.1[/tex]

The period, which is the time to complete one cycle = 0.1 seconds

The number of cycle completed per second, is the frequency, f

[tex]f = \dfrac{1}{P} = \dfrac{1}{0.1} = 10[/tex]

f = 10 Hz = 10 cycles

The number of cycle completed per second is f = 10 cycles

(b) When the object is at the farthest right, we have;

sin(20·π·t) = Maximum = 1

[tex]\mathbf{sin\left(\dfrac{\pi}{2}\right)} = 1[/tex]

Therefore,

[tex]20 \cdot \pi \cdot t = \dfrac{\pi}{2}[/tex]

[tex]t = \dfrac{\pi}{20 \cdot \pi \cdot 2} = \dfrac{1}{40} = 0.025[/tex]

The first time it is at the farthest right is t = 0.025 seconds after start

(c) [tex]\mathrm{Velocity, \ v, \ is \ given \ by \ v = \dfrac{dx(t)}{dt}}[/tex]

Therefore;

[tex]v = \dfrac{dx(t)}{dt} = \dfrac{dx(t)}{dt} \left(3 \cdot sin \left(20 \cdot \pi \cdot t \right) = 60\cdot \pi \cdot cos \left(20 \cdot \pi \cdot t \right)[/tex]

At t = 0.25 seconds, we have;

[tex]v = \dfrac{dx(t)}{dt} = 60\cdot \pi \cdot cos \left(20 \times \pi \times 0.025 \right) = 0[/tex]

The velocity of the object at the t = 0.025 seconds is v(t) = 0

(d) Acceleration, a, is given by [tex]a = \dfrac{dv(t)}{dt}[/tex]

Therefore;

[tex]a = \dfrac{dv(t)}{dt} = \dfrac{d}{dt} \left( 60\cdot \pi \cdot cos \left(20 \times \pi \times t\right) \right) =-1200 \cdot \pi ^2 \cdot sin(20 \cdot t \cdot \pi)[/tex]

a = -1200·π²·sin(20·t·π)

∴ a = -1200×π²×sin(20×0.025×π)

sin(20×0.025×π) = 1

∴ a = -1200×π²×1 ≈ -11843.53

At the time found in part b the acceleration of the object, a ≈ -11843.53 m/s²

Learn more here:

https://brainly.com/question/21731826

What creates the solar wind?

Answers

Answer:

The solar wind is created by the outward expansion of plasma (a collection of charged particles) from the Sun's corona (outermost atmosphere). This plasma is continually heated to the point that the Sun's gravity can't hold it down. It then travels along the Sun's magnetic field lines that extend radially outward.

A car moved 40 km north and 90 km south. What is the displacement of the car?
A. 50 km south
B. 50 km north
C. 10 km east​

Answers

Answer:

A. 50 km south

Explanation:

hope this helps!

Other Questions
Use rounding to estimate the product of 5,555 and 4,444 round both numbers to the nearest thousand to find answer cual es el ambiente del cuento el nio y los clavos An ant with a mass of 4 x 10-6 kg is carrying a bread crumb back to its anthill . The bread crumb has a mass of 8 x 10-5 kg. The mass of the bread crumb is how many times the mass of the ant? The lower airway consistes of theO a. bronchi and bronchiolesO b. trachea and bronchiO c. bronchioles and alveoliO d. lungs and bronchi 3. A plant cell (0.9% NaCl) is placed into a solution of 20% NaCl, the membrane is permeablwater. What happens to the plant cell?4. A plant cell (0.9% NaCl) is placed into a solution of 100% DI water, the membrane ispermeable to water. What happens to the plant cell?ow Which is right? A. Charlie Chaplin a former stage actor began his film career in 1914.B. Charlie Chaplin, a former stage actor, began his film career in 1914. what is the slope of the line that goes through the points (2,-1) and (6,1) The third-grade teachers had a pizza party. They ordered 11 large pizzas and each pizza had 8 slices. There were 4 classrooms in the grade. You buy a gallon of milk. How many cups can you pour from it? which of these is a comma splice? agatha: I need to run please hurry im late. Billboard: You cant sit there, I'm saving that for a friend, please move.Blackboard: I cant believe I ate the whole thing; it was huge! Why do you think that Israelites chose to settle in this region, as opposed to any other? Southern Florida has many tropical hardwood hammocksforest habitats that are warm, wet, and populated with many broad-leaved evergreen trees. Why might a plant native to an ecosystem with a cooler climate do well if introduced to a tropical hardwood hammock? Group of answer choices The trees in the tropical hardwood hammock are better at competing for native resources than the introduced species are. The wet conditions in the tropical hardwood hammock disrupt the life cycle and limit reproduction of the introduced species. Freezing temperatures that normally limit the population in the cooler climate are lacking in the tropical hardwood hammock. Pollinators and seed carriers that normally increase the population in the cooler climate are lacking in the tropical hardwood hammock. One week, seventy-two percent of the animals that cam to a veterinary hospital were dogs. If there were 230 animals total, how many were dogs? Assume that the pendulum clock shown in the photograph is a closedsystemWhich statement describes evidence that the pendulum's energy is conservedeven as it eventually stops moving?A. Energy must be added to the pendulum to keep it from slowingdownB. Some of the clock's matter is transformed into new energyC. The amount of each type of energy in the system can bemeasuredD. All its mechanical energy is transformed into other forms ofenergy is it right? or like idk im confused Figure B is a scaled copy of Figure A. Select all of the statements that must be true:Figure B is larger than Figure A.Figure B has the same number of edges as Figure A.Figure B has the same perimeter as Figure A.Figure B has the same number of angles as Figure A.Figure B has angles with the same measures as Figure A.Item at position 2ANSWER QUICKLY PLEASE Enrique says 0.444... is a rational number. Which of the following best describes if Enrique is correct? Escribe la respuesta correcta usando el Pretrito o Imperfecto.La semana pasada(ser) muy pesada para m. Which of the binomials below is a factor of this Torinomial? X2 + 12x + 32 Which of the following is used in this image? The pic did not showlinesperspectiveoverlappingnegative space