Answer:
m₁ = 70 lb
Explanation:
Here we will use the law of conservation of momentum:
m₁u₁ + m₂u₂ + m₃u₃ = m₁v₁ + m₂v₂ + m₃v₃
where,
m₁ = mass of first suitcase = ?
m₂ = mass of second suitcase = 30 lb
m₃ = mass of baggage carrier = 50 lb
u₁ = initial speed of first suitcase = 7.2 ft/s
u₂ = initial speed of second suitcase = 7.2 ft/s
u₃ = initial speed of baggage carrier = 0 ft/s
v₁ = Final speed of first suitcase = 4.8 ft/s
v₂ = Final speed of second suitcase = 4.8 ft/s
v₃ = Final speed of baggage carrier = 4.8 ft/s
because after collision all three will have same speed
Therefore,
(m₁)(7.2 ft/s) + (30 lb)(7.2 ft/s) + (50 lb)(0 ft/s) = (m₁)(4.8 ft/s) + (30 lb)(4.8 ft/s) + (50 lb)(4.8 ft/s)
(m₁)(7.2 ft/s) + (216 lb ft/s) + (0 lb ft/s) = (m₁)(4.8 ft/s) + (144 lb ft/s) + (240 lb ft/s)
(m₁)(7.2 ft/s) - (m₁)(4.8 ft/s) = 168 lb ft/s
m₁ = (168 lb ft/s)/(2.4 ft/s)
m₁ = 70 lb
Consider a 50-turn circular loop with a radius of 1.55 cm in a 0.35-T magnetic field. This coil is going to be used in a galvanometer that reads 45 μA for a full-scale deflection. Such devices use spiral springs which obey an angular form of Hooke's law, where the restoring torque is:
τs = -κ θ.
Here κ is the torque constant and θ is the angular displacement, in radians, of the spiral spring from equilibrium, where the magnetic field and the normal to the loop are parallel.
Required:
a. Calculate the maximum torque, in newton meters, on the loop when the full-scale current flows in it.
b. What is the torque constant of the spring, in newton meters per radian, that must be used in this device?
Complete Question
Consider a 50-turn circular loop with a radius of 1.55 cm in a 0.35-T magnetic field. This coil is going to be used in a galvanometer that reads 45 μA for a full-scale deflection. Such devices use spiral springs which obey an angular form of Hooke's law, where the restoring torque is:
τs = -κ θ.
Here κ is the torque constant and θ is the angular displacement, in radians, of the spiral spring from equilibrium, where the magnetic field and the normal to the loop are parallel.
Required:
a. Calculate the maximum torque, in newton meters, on the loop when the full-scale current flows in it.
b. What is the torque constant of the spring, in newton meters per radian, that must be used in this device? Assume the full scale deflection is 60° from the spring's equilibrium position
Answer:
a
[tex]\tau_{m} = 5.95 *10^{-7} \ N \cdot m[/tex]
b
[tex]\beta = 2.83 *10^{-7} \ N \cdot m / rad [/tex]
Explanation:
From the question we are told that
The number of turns is N = 50
The radius is r = 1.55 cm = 0.0155 m
The magnetic field is B = 0.35 T
The induced current is [tex]I = 45 \mu A = 45 *10^{-6} \ A[/tex]
Generally the area of loop is mathematically represented as
[tex]A = \pi r^2[/tex]
=> [tex]A =3.142 * 0.0155^2[/tex]
=> [tex]A =0.000755\ m^2[/tex]
Generally the maximum torque is mathematically represented as
[tex]\tau_{m} = N * B * I * A[/tex]
=> [tex]\tau_{m} = 50 * 0.35 * 45 *10^{-6} * 0.000755[/tex]
=> [tex]\tau_{m} = 5.95 *10^{-7} \ N \cdot m[/tex]
Generally the torque 60° from the spring's equilibrium position is mathematically represented as
[tex]\tau = N * B * I * A * sin (60)[/tex]
=> [tex]\tau = 50 * 0.35 * 45 *10^{-6} * 0.000755 * sin (60)[/tex]
=> [tex]\tau = 2.973 *10^{-7} \ N \cdot m [/tex]
Generally the toque constant of the spring is mathematically represented as
[tex]\beta = \frac{\tau}{60}[/tex]
=> [tex]\beta = \frac{\tau}{\frac{\pi}{3}}[/tex]
=> [tex]\beta = \frac{2.973 *10^{-7}}{\frac{\pi}{3}}[/tex]
=> [tex]\beta = 2.83 *10^{-7} \ N \cdot m / rad [/tex]
What are the standard international (si) units of distance
Answer:
meter
Explanation:
Answer: The International System of Units is a system of measurement based on 7 base units
Explanation: the metre, kilogram, second, ampere, Kelvin, mole, and candela. These base units can be used in combination with each other.
Astronomers have proposed the existence of a ninth planet in the distant solar system. Its semi-major axis is suggested to be approximately 600 AU. If this prediction is correct, what is its orbital period in years
Answer:
T = 1.4696 10⁴ years
Explanation:
For this exercise we must use Kepler's laws, specifically the third law which is the application of the universal law of gravitation to Newton's second law
F = ma
G m M / r² = m a_c = m v² / r
G M / r = v²
the speed of the circular orbit is
v = 2π r / T
we substitute
G M / r = 4π² r² / T²
T² = (4π² / G M) r³
Kepler proved that this expression is the same if the radius is changed by the semi-major axis of an ellipse
T² = (4π² /GM) a³
the constant is worth
(4π² / GM) = 2.97 10⁻¹⁹ s² / m³
let's reduce the distance to SI units
AU is the distance from the Earth to the Sun
a = 600 AU = 600 AU (1.496 10¹¹ m / 1 AU)
a = 8.976 10¹³ m
T² = 2.97 10⁻¹⁹ (8.976 10¹³)³
T² = 21.4786 10²²
T = 4.63 10¹¹ s
Let's reduce to years
T = 4.63 10¹¹s (1 h / 3600s) (1 day / 24 h) (1 year / 365 days)
T = 1.4696 10⁴ years
The scientific method is the only way of learning about Nature used by scientist today *
A. true
B. false
Answer:
false
Explanation:
Suppose that your favorite AM radio station broadcasts at a frequency of 1600 kHz. What is the wavelength in meters of the radiation from the station
Answer:
187.5
Explanation:
If 2000 kg cannon fires 2 kg projectile having muzzle velocity 200 m/s than the recoil speed of the cannon will be *
A. 0.2 m/s
B. 2 m/s
C. 4 m/s
D. 10 m/s
Answer:
D. 10 m/s
Explanation:
Part D
Next, we'll examine magnetic force. Bring the ends of your two magnets together. Explore the three
possible combinations. In two of the combinations, the two ends are the same. In one combination, the
two ends are different. Describe the force you feel in each combination
Answer:
i. The magnetic force of repulsion.
ii. The magnetic force of attraction.
Explanation:
A magnet is a material that has the attraction and repulsion capability. Magnets has two poles, north and south, thus would attract or repel another magnet in its neighborhood. It can either be a permanent or temporal magnet, and attracts ferrous metals.
i. In the case of two combinations where two ends are the same, it could be observed that the two ends (poles) repels each other. Thus since like poles repels, magnetic force of repulsion is felt.
ii. In the case of one combination in which the two ends are different, the two ends (poles) attract. Since unlike poles attracts, magnetic force of attraction is observed.
I NEED HELP PLEASEE ITS AN ECONOMICS QUESTION ABOVE
Answer:
I believe the answer is Property taxes
Explanation:
Answer: I'm pretty sure property taxes
Explanation:
A shell is fired with a horizontal velocity in the positive x direction from the top of an 80 m high cliff. The shell strikes the ground 1330 m from the base of the cliff. What is the speed of the shell as it hits the ground
Answer:
V = 331.59m/s
Explanation:
First we need to calculate the time taken for the shell fire to hit the ground using the equation of motion.
S = ut + 1/2at²
Given height of the cliff S = 80m
initial velocity u = 0m/s²
a = g = 9.81m/s²
Substitute
80 = 0+1/2(9.81)t²
80 = 4.905t²
t² = 80/4.905
t² = 16.31
t = √16.31
t = 4.04s
Next is to get the vertical velocity
Vy = u + gt
Vy = 0+(9.81)(4.04)
Vy = 39.6324
Also calculate the horizontal velocity
Vx = 1330/4.04
Vx = 329.21m/s
Find the magnitude of the velocity to calculate speed of the shell as it hits the ground.
V² = Vx²+Vy²
V² = 329.21²+39.63²
V² = 329.21²+39.63²
V² = 108,379.2241+1,570.5369
V² = 109,949.761
V = √ 109,949.761
V = 331.59m/s
Hence the speed of the shell as it hits the ground is 331.59m/s
what chemical diverged from trees
a resin and turpentine
b sodium
c lead
d marcotting
Answer:
a. resin and turpentine
Explanation:
The chemicals that diverged from trees are resin and turpentine.
Resin are produced by special cells in trees, most times we see them when a tree is damaged or cut. They are usually derived from pines and firs.
Turpentine is obtained by distilling resin.
Turpentine has an antiseptic property that has different uses. They are used as cleansing agents and for producing sanitary materials.
When driving at slower speeds you need to use what type of steering
wheel movements compared to when driving at faster speeds? *
Answer:
slower speeds = larger and faster steering wheel movements
faster speeds = small and slow steering wheel movements
Explanation:
When driving at slower speeds you need to use larger and faster steering wheel movements. This is because at slow speeds the car does not have enough momentum to make certain maneuvers with small steering wheel movements in a given amount of time, therefore making large and faster steering wheel movements gives the car enough time with the momentum it has to make the desired maneuver. At faster speeds only small and slow steering wheel movements are needed and while cause the car to quickly change to the desired direction due to the increased momentum of the car.
A toy rocket is launched vertically from ground level (y = 0 m), at time t = 0.0 s. The rocket engine provides constant upward acceleration during the burn phase. At the instant of engine burnout, the rocket has risen to 98 m and acquired a velocity of The rocket continues to rise in unpowered flight, reaches maximum height, and falls back to the ground. The upward acceleration of the rocket during the burn phase is closest to:
29 m/s2
31 m/s2
33 m/s2
30 m/s2
32 m/s2
Explanation:
The question is incomplete. Here is the complete question.
A toy rocket is launched vertically from ground level (y = 0 m), at time t = 0.0 s. The rocket engine provides constant upward acceleration during the burn phase. At the instant of engine burnout, the rocket has risen to 98 m and acquired a velocity of 30m/s. The rocket continues to rise in unpowered flight, reaches maximum height, and falls back to the ground. The upward acceleration of the rocket during the burn phase is closest to...
Given
initial velocity of rocket u = 0m/s
final velocity of rocket = 30m/s
Height reached by the rocket = 98m
Required
upward acceleration of the rocket
Using the equation of motion below to get the acceleration a:
[tex]v^2 = u^2+2as\\30^2 = 0^2 + 2(a)(98)\\900 = 196a\\a = \frac{900}{196}\\a = 4.59m/s^2[/tex]
Hence upward acceleration of the rocket during the burn phase is closest to 5m/s²
Note that the velocity used in calculation was assumed.
Which property of a substance can be determined using a pH indicator.
Answer:
Acidity
Explanation:
A pH indicator measures how acidic or basic a substance is.
Hope this helped :)
cameron drives his car 15 km north. He stops for lunch and then drives 12 km south. What is his displacement?
Answer:
Displacement is 3 km North
Explanation:
All biomes don’t have the same level of biodiversity. What seems to be the optimal conditions for high biodiversity?
Answer:
See the answer below
Explanation:
The optimal conditions for high biodiversity seem to be a warm temperature and wet climates.
The tropical areas of the world have the highest biodiversity and are characterized by an average annual temperature of above 18 [tex]^oC[/tex] and annual precipitation of 262 cm. The areas are referred to as the world's biodiversity hotspots.
Consequently, it follows logically that the optimal conditions for high biodiversity would be a warm temperature of above 18 [tex]^oC[/tex] and wet environment with annual precipitation of not less than 262 cm.
The variation in temperature and precipitation across biomes can thus be said to be responsible for the variation in the level of biodiversity in them.
PLEASE SOLVE FAST!!! If the average American watches hours of TV every day , how many minutes will be spent in front of the TV by a person's 65th birthday? Solve using Dimensional Analysis.
Answer:
5694000 min
Explanation:
Let's suppose the average American watches 4 hours of TV every day. First, we will calculate how many minutes they watch per day. We will use the conversion factor 1 h = 60 min.
(4 h/day) × (60 min/1 h) = 240 min/day
They watch 240 minutes of TV per day. Now, let's calculate how many minutes they watch per year. We will use the conversion factor 1 year = 365 day.
240 min/day × (365 day/year) = 87600 min/year
They watch 87600 min/year. Finally, let's calculate how many minutes they spend watching TV in 65 years.
87600 min/year × 65 year = 5694000 min
The current is suddenly turned off. How long does it take for the potential difference between points a and b to reach one-half of its initial value
Complete Question
The complete question is shown on the first uploaded image
Answer:
Explanation:
From the question we are told that
The original voltage is [tex]V_o[/tex]
The new voltage is [tex]V =\frac{V_o}{2}[/tex]
The capacitance is [tex]C = 150\ nF = 150 *10^{-9} \ F[/tex]
The first resistance is [tex]R_i = 26 \Omega[/tex]
The second resistance is [tex]R_E = 200 \Omega[/tex]
Generally the equivalent resistance is
[tex]R_e = R_1 + R_E[/tex]
=> [tex]R_e = 26 +200 [/tex]
=> [tex]R_e = 226 \ \Omega [/tex]
Generally the time constant is mathematically represented as
[tex]\tau = RC[/tex]
=> [tex]\tau = 226 * 150 *10^{-9}[/tex]
=> [tex]\tau = 3.39 *10^{-5} \ s [/tex]
Generally the voltage is mathematically represented as
[tex]V = V_o e^{-\frac{t}{\tau} }[/tex]
=> [tex]\frac{V_o}{2} = V_o e^{-\frac{t}{\tau} }[/tex]
=> [tex]0.5 = e^{-\frac{t}{\tau} }[/tex]
=> [tex]ln(0.5) = {-\frac{t}{ 3.39 *10^{-5} } }[/tex]
=> [tex]ln(0.5) * 3.39 *10^{-5} = -t [/tex]
=> [tex]t = 2.35*10^{-5} \ s [/tex]
dimensional formula of stress is same as
Dimensional formula of stress is same as pressure.
Average velocity of Mike Phelps swimming 100 m race in the 50 m long pool (2 laps) is approximately equal to *
A. 0 m/s
B. 1 m/s
C. 2 m/s
D. 4 m/s
Answer:
2
Explanation:
Which statement best describes an atom? (2 points)
оа
Protons and neutrons grouped in a specific pattern
Ob
Protons and electrons spread around randomly
ос
A group of protons and neutrons that are surrounded by electrons
Od
A ball of electrons and neutrons surrounded by protons
Answer:
A group of protons and neutrons that are surrounded by electrons I think that's the answer...
Explanation:
in a controlled experiment do none of the variables change?
Answer:
Yes
Explanation:
The variables change in and experiment.
Answer:
If you are carefully enough to control everything, then everything that could change the result of your experiment won't happen.
Explanation:
A 1000-turn solenoid is 50 cm long and has a radius of 2.0 cm. It carries a current of 18.0 A. What is the magnetic field inside the solenoid near its center
Answer:
The value is [tex]B = 0.0452 \ T [/tex]
Explanation:
From the question we are told that
The number of turns is N = 1000
The length is L = 50 cm = 0.50 m
The radius is r = 2.0 cm = 0.02 m
The current is I = 18.0 A
Generally the magnetic field is mathematically represented as
[tex]B = \mu_o * \frac{N }{L} * I[/tex]
Here [tex]\mu_o[/tex] is the permeability of free space with value
[tex]\mu_o = 4\pi * 10^{-7} N/A^2[/tex]
So
[tex]B = 4\pi * 10^{-7} * \frac{1000}{0.50} * 18.0[/tex]
=> [tex]B = 0.0452 \ T [/tex]
Calculate the force a 75 kg high jumper must exert in order to produce an acceleration that is 3.2 times the acceleration due to gravity.
Answer:
Explanation
According to Newton's second law of motion,
F = ma
m is the mass
a is the acceleration
If the acceleration is 3.2 times the acceleration due to gravity, then a = 3.2g
The formula becomes;
F = m(3.2g)
F = 3.2mg
m= 75kg
g = 9.81m/s²
F = 3.2(75)(9.81)
F = 2,354.4N
Hence the force exerted by the jumper is 2,354.4N
An LED lamp powered by a USB-based portable battery has an effective resistance of 500 Ohm. If the battery is rated for 10,000 mAh, then how long can the lamp be powered and what is the total power consumed by the lamp? The operating voltage of a USB powered device is 5V. Assume that the battery is also rated at 5V.
Answer:
Time = 1000 h
Power = 0.05 W = 50 mW
Explanation:
First we will find the current consumed by the lamp. For this purpose we can use the Ohm's Law. The equation of Ohm's Law is written as follows:
V = IR
I = V/R
where,
I = Current = ?
V = Voltage = 5 V
R = Resistance = 500 Ω
Therefore,
I = 5 V/500 Ω
I = 0.01 A = 10 mA
Now the time duration of the operation f lamp can be found by:
Time = Rating/Current
Time = 10000 mAh/ 10 mA
Time = 1000 h
The power consumption of lamp is given as follows:
Power = IV
Power = (0.01 A)(5 V)
Power = 0.05 W = 50 mW
On top of a cliff of height h, a spring is compressed 5m and launches a projectile perfectly horizontally with a speed of 75 m s . It hits the ground with speed 90 m s . How high above the ground was the cliff? (Hint: use energy conservation to make the problem easier!)
Answer:
The height of the cliff is 121.276 m
Explanation:
Given;
initial velocity of the projectile, v₁ = 75 m/s
final velocity of the projectile, v₂ = 90 m/s
spring compression = 5 m
Apply the law of conservation of energy;
mgh₀ + ¹/₂mv₁² = mgh₂ + ¹/₂mv₂²
gh₀ + ¹/₂v₁² = gh₂ + ¹/₂v²
gh₁ - gh₂ = ¹/₂v₂² - ¹/₂v₁²
g(h₀ - h₂) = ¹/₂ (v₂² - v₁²)
h₀ - h₂ = ¹/₂g (v₂² - v₁²)
h₀ = h(cliff) + 5m
when the projectile hits the ground, Final height, h₂ = 0
[tex]h_o - 0 = \frac{1}{2g}(v_2^2-v_1^2)\\\\h_{cliff} + 5= \frac{1}{2g}(v_2^2-v_1^2)\\\\h_{cliff} = \frac{1}{2g}(v_2^2-v_1^2) - 5\\\\h_{cliff} = \frac{1}{2*9.8}(90^2-75^2) - 5\\\\h_{cliff} = 121.276 \ m[/tex]
Therefore, the height of the cliff is 121.276 m
which statement is correct about the strength of forces?
-Electrostatic forces are exactly 10 times stronger than gravitational forces.
-Electrostatic forces are exactly 10 times weaker than gravitational forces.
-Electrostatic forces are trillions of times stronger than gravitational forces.
-Electrostatic forces are trillions of times weaker than gravitational forces.
Answer:
Thanks!!!!! adding this so it doesn’t get deleted.
Explanation:
1. Electrostatic forces are trillions of times stronger than gravitational forces. 2. normal force and friction 3. contact forces 4. The electrostatic forces from the contact of the hands with the paper causes the paper molecules to separate. 5. The electrostatic forces between the molecules of the board prevent the force of gravity from breaking the board apart.
The correct statement over here is that electrostatic forces are trillions of times stronger than gravitational forces. Hence, option C is correct.
What is an Electrostatic Force?One of the basic forces in the cosmos is electrostatic force. In the universe, there are four basic forces. These include gravitational force, electromagnetic force, weak nuclear force, and strong nuclear force. Under the umbrella of electromagnetic force is electrostatic force. Two charges placed apart are subject to the electrostatic force. The size of each charged and the separation between them determines how much electrostatic force there will be.
When two charges of the same type are brought together, whether positive or negative, they repel one another. It is known as the electrostatic force of repelling when it operates among two charges that are similar.
Therefore, the electrostatic forces are trillions of times stronger than the gravitational forces.
To know more about Electrostatic Force:
https://brainly.com/question/9774180
#SPJ2
Suppose astronomers discover a radio message from a civilization whose planet orbits a star 35 light-years away. Their message encourages us to send a radio answer, which we decide to do. Suppose our governing bodies take 2 years to decide whether and how to answer. When our answer arrives there, their governing bodies also take two of our years to frame an answer to us. How long after we get their first message can we hope to get their reply to ours? Enter your answer in years.
Answer:
The duration is [tex]T =72 \ years /tex]
Explanation:
From the question we are told that
The distance is [tex]D = 35 \ light-years = 35 * 9.46 *10^{15} = 3.311 *10^{17} \ m [/tex]
Generally the time it would take for the message to get the the other civilization is mathematically represented as
[tex]t = \frac{D}{c}[/tex]
Here c is the speed of light with the value [tex]c = 3.08 *10^{8} \ m/s[/tex]
=> [tex]t = \frac{3.311 *10^{17} }{3.08 *10^{8}}[/tex]
=> [tex]t = 1.075 *10^9 \ s[/tex]
converting to years
[tex]t = 1.075 *10^9 * 3.17 *10^{-8} [/tex]
[tex]t = 1.075 *10^9 * 3.17 *10^{-8} [/tex]
[tex]t = 34 \ years [/tex]
Now the total time taken is mathematically represented as
[tex]T = 2* t + 2 + 2[/tex]
=> [tex]T = 2* 34 + 2 + 2[/tex]
=> [tex]T =72 \ years /tex]
To practice Problem-Solving Strategy 17.1 for wave interference problems. Two loudspeakers are placed side by side a distance d = 4.00 m apart. A listener observes maximum constructive interference while standing in front of the loudspeakers, equidistant from both of them. The distance from the listener to the point halfway between the speakers is l = 5.00 m . One of the loudspeakers is then moved directly away from the other. Once the speaker is moved a distance r = 60.0 cm from its original position, the listener, who is not moving, observes destructive interference for the first time. Find the speed of sound v in the air if both speakers emit a tone of frequency 700 Hz .
Complete Question
The compete question is shown on the first uploaded question
Answer:
The speed is [tex] v = 350 \ m/s [/tex]
Explanation:
From the question we are told that
The distance of separation is d = 4.00 m
The distance of the listener to the center between the speakers is I = 5.00 m
The change in the distance of the speaker is by [tex]k = 60 cm = 0.6 \ m[/tex]
The frequency of both speakers is [tex]f = 700 \ Hz[/tex]
Generally the distance of the listener to the first speaker is mathematically represented as
[tex]L_1 = \sqrt{l^2 + [\frac{d}{2} ]^2}[/tex]
[tex]L_1 = \sqrt{5^2 + [\frac{4}{2} ]^2}[/tex]
[tex]L_1 = 5.39 \ m [/tex]
Generally the distance of the listener to second speaker at its new position is
[tex]L_2 = \sqrt{l^2 + [\frac{d}{2} ]^2 + k}[/tex]
[tex]L_2 = \sqrt{5^2 + [\frac{4}{2} ]^2 + 0.6}[/tex]
[tex]L_2 = 5.64 \ m [/tex]
Generally the path difference between the speakers is mathematically represented as
[tex]pD = L_2 - L_1 = \frac{n * \lambda}{2}[/tex]
Here [tex]\lambda[/tex] is the wavelength which is mathematically represented as
[tex]\lambda = \frac{v}{f}[/tex]
=> [tex] L_2 - L_1 = \frac{n * \frac{v}{f}}{2}[/tex]
=> [tex] L_2 - L_1 = \frac{n * v}{2f}[/tex]
=> [tex] L_2 - L_1 = \frac{n * v}{2f}[/tex]
Here n is the order of the maxima with value of n = 1 this because we are considering two adjacent waves
=> [tex] 5.64 - 5.39 = \frac{1 * v}{2*700}[/tex]
=> [tex] v = 350 \ m/s [/tex]
The speed of sound in air is 350 m/s
Since the distance between both speakers is 4 m, and the listener is standing 5 m away from halfway between them, the distance L from each loudspeaker to the listener, since the arrangement forms a right-angled triangle, using Pythagoras' theorem,
L = √[(5 m)² + (4/2 m)²]
= √[25 m² + (2 m)²]
= √[25 m² + 4 m²]
= √29 m² = 5.39 m.
Now, when one speaker is moved 60 cm = 0.6 m away from its original position, its distance from the listener is now
L' = √[(5 m)² + (4/2 + 0.6 m)²]
= √[25 m² + (2 m + 0.6 m)²]
= √[25 m² + (2.6 m)²]
= √[25 m² + 6.76 m²]
= √31.76 m²
= 5.64 m.
Now, the path difference when we first have destructive interference is
ΔL = L' - L
= 5.64 - 5.39
= 0.25
Since we have destructive interference for the first time when the speaker is moved, the path difference, ΔL = (n + 1/2)λ where λ = wavelength = v/f where v = speed of sound in air and f = frequency = 700 Hz.
Now, since we have destructive interference for the first time, n = 0.
So, ΔL = (n + 1/2)λ
ΔL = (0 + 1/2)v/f
ΔL = v/2f
Making v subject of the formula, we have
v = 2fΔL
Substituting the values of the variables into the equation, we have
v = 2fΔL
v = 2 × 700 Hz × 0.25 m
v = 350 m/s
So, the speed of sound in air is 350 m/s
Learn more about interference of sound here:
https://brainly.com/question/1346741
Density is calculated by dividing the mass of an object by its volume. The Sun has a mass of 1.99×1030 kg and a radius of 6.96×108 m. What is the average density of the Sun?
Answer:
Density is calculated by dividing the mass of an object by its volume. The Sun has a mass of 1.99×1030 kg and a radius of 6.96×108 m. What is the average density of the Sun?
In a pickup game of dorm shuffleboard, students crazed by final exams use a broom to propel a calculus book along the dorm hallway. If the 4.7 kg book is pushed from rest through a distance of 0.85 m by the horizontal 42 N force from the broom and then has a speed of 1.0 m/s, what is the coefficient of kinetic friction between the book and floor
Answer:
μ_k = 0.851
Explanation:
We are given;
Mass of book; m_book = 4.7 kg
Horizontal force; F_horiz = 42 N
Distance; d = 0.85 m
Speed; v = 1 m/s
First of all let's find the acceleration using Newton's equation of motion;
v² = u² + 2ad
u is initial velocity and it's 0 m/s in this case.
Thus;
1² = (2 × 0.85)a
1 = 1.7a
a = 1/1.7
a = 0.5882 m/s²
Now, resolving forces along the vertical direction, we have;
W - N = 0
Thus,W = N
Where W is weight = mg and N is normal force
Thus; N = mg = 4.7 × 9.81 = 46.107 N
Now, resolving forces along the horizontal direction, we have;
F_horiz - ((μ_k)N) = ma
Where μ_k is coefficient of kinetic friction.
Thus;
42 - 46.107(μ_k) = 4.7 × 0.5882
42 - 46.107(μ_k) = 2.76454
μ_k = (42 - 2.76454)/46.107
μ_k = 0.851