a chemist titrates of a sodium hydroxide solution with solution at . calculate the ph at equivalence. round your answer to decimal places. note for advanced students: you may assume the total volume of the solution equals the initial volume plus the volume of solution added.

The standard reduction potential for the Rh4+/Rh3+ couple is dependent on the concentration ratio of Rh3+ to Rh4+, which can be determined experimentally. E° = 1.71 V + 0.059 V * ln([Rh3+]/[Rh4+])

To determine the standard reduction potential for the rhodium ions (Rh4+/Rh3+), we can use the Nernst equation, which relates the standard reduction potential to the half-cell potential:

Ecell = E°cell - (RT/nF)ln(Q)
Where E°cell is the standard cell potential, R is the gas constant, T is the temperature, n is the number of electrons transferred in the reaction, F is the Faraday constant, and Q is the reaction quotient.
For the reduction of Rh4+ to Rh3+ in solution, the balanced equation is:
Rh4+ + e- → Rh3+
The number of electrons transferred (n) is 1. The reaction quotient (Q) can be expressed as the concentration of Rh4+ over the concentration of Rh3+:
Q = [Rh3+]/[Rh4+]
Since the investigator is studying a new process and data for the half-cell potential is not available, we can assume that the half-cell potential for the reduction of Rh4+ to Rh3+ is equal to the standard reduction potential for the couple (E°).
Therefore, we can rearrange the Nernst equation and solve for E°:
E° = Ecell + (RT/nF)ln(Q)
Substituting the given values, we get:
E° = 1.71 V + (0.0257 V/K)(298 K)/1 * ln([Rh3+]/[Rh4+])
Simplifying, we get:
E° = 1.71 V + 0.059 V * ln([Rh3+]/[Rh4+])
Thus, the standard reduction potential for the Rh4+/Rh3+ couple is dependent on the concentration ratio of Rh3+ to Rh4+, which can be determined experimentally.

for more such questions on concentration .

https://brainly.com/question/28564792  

#SPJ11

Answer:1.8 mol of Al Is required

Explanation:

first u must write the right chemical equetion

4Al + 3O2 ------> 2Al2O3 then u will write the proportion

x 1.35 mol

4Al + 3O2--------------> 2Al2O3

4 mol 3 mol

X/4 =1.35/3

X = (1.35 × 4) /3

X = 1.8 mol will be produced .

Hi! The product of the reaction between ethene (C2H4) and hydrogen bromide (HBr) is CH3CH2Br. This reaction involves the addition of hydrogen and bromine atoms to the double bond in ethene, resulting in the formation of a single bond with a new halogen attached.

The reaction between ethene and hydrogen bromide is a classic example of an addition reaction. The double bond of ethene is broken, and the hydrogen atom from hydrogen bromide adds to one carbon atom while the bromine atom adds to the other carbon atom. This results in the formation of a new molecule.The chemical equation for the reaction is:C2H4 + HBr → CH3CH2Br.The product of the reaction between ethene and hydrogen bromide is CH3CH2Br, also known as bromoethane. This molecule consists of an ethyl group (CH3CH2) and a bromine atom (Br). There is no formation of hydrogen gas (H2) or any other compound listed in the options given.It is important to note that the addition reaction between ethene and hydrogen bromide is an exothermic reaction, meaning that it releases heat as a byproduct. This reaction can be used to prepare various alkyl halides, which are useful in organic synthesis.In summary, the product of the reaction between ethene and hydrogen bromide is bromoethane (CH3CH2Br), and there is no formation of hydrogen gas or any other compound listed in the given options.The correct answer is:A. CH3CH2Br

Learn more about reaction here

https://brainly.com/question/24795637

#SPJ11

Answer:

The correct answer is option (D) Propanone, is not readily oxidized by acidified potassium dichromate (VI) solution.

Explanation:

This is due to the fact that propanone has reached the maximal level of oxidation and cannot undergo any more oxidation.

When potassium dichromate(VI) solution is used to treat propanone, the orange colour of the solution does not change, proving that no oxidation has occurred. In contrast, potassium dichromate can oxidize propan-1-ol, propanal, and propan-2-ol to produce propanoic acid and propanone, respectively.

These alcohols turn from orange to green as a result of oxidation.

Therefore, it's crucial to comprehend how these molecules react with acidified potassium dichromate (VI) in order to recognize and differentiate between various organic compounds.

To learn more about the Propanone,

https://brainly.com/question/1406074

https://brainly.com/question/13341417

Solution X:The pH of Solution X can be determined by using the Henderson-Hasselbalch equation. The equation is pH = pKa + log(base/acid).

A solution is a means of resolving a problem or addressing an issue. It is a process or strategy to overcome an obstacle, reach a goal, or achieve a desired outcome. Solutions can be creative and innovative, or they can be based on established techniques, models, and frameworks. Solutions often involve a combination of approaches, such as a mix of problem-solving, critical thinking, and decision-making.

For imidazole, the pKa is 7.17. The base is 0.0060 moles of imidazole and the acid is 0.0040 moles of imidazolium chloride. Thus, plugging in the values into the equation, we get:

pH = 7.17 + log(0.0060/0.0040) = 7.17 + 0.301 = 7.47

Solution Y:

The pH of Solution Y can be determined by using the Henderson-Hasselbalch equation. The equation is pH = pKa + log(base/acid). For imidazole, the pKa is 7.17. The base is 0.060 moles of imidazole and the acid is 0.040 moles of imidazolium chloride. Thus, plugging in the values into the equation, we get:

pH = 7.17 + log(0.060/0.040) = 7.17 + 0.301 = 7.77

Therefore, the pH of Solution X is 7.47 and the pH of Solution Y is 7.77.

To learn more about Solution

https://brainly.com/question/25326161

#SPJ4

A balanced equation obey the law of conservation of mass, the mass can neither be converted nor  be destroyed but can converted from one form to another. Here the given reaction indicates Haber process.

The ratio of the product of concentrations of the products to that of the reactants is also known as the concentration quotient and it is denoted as Q. At equilibrium Q becomes equal to the equilibrium constant.

The Haber process is:

N₂ + 3H₂ → 2NH₃

Q = [NH₃]² / [N₂] [H₂]³

Q = [0.0596]² / [0.600] [0.420]

Q = 0.014

Here Q is less than K, so the reaction proceeds in the forward direction.

To know more about Haber process, visit;

https://brainly.com/question/21867752

#SPJ1

You with writing ionic compound formulas. An ionic compound consists of a positive ion (cation) and a negative ion (anion) bonded together through electrostatic forces. To write the formula of an ionic compound, you need to balance the charges of the cation and anion to ensure the compound is neutral.

In your example, you have a sodium ion (Na+) and a fluoride ion (F-). The sodium ion has a positive charge of +1, while the fluoride ion has a negative charge of -1. To write the formula for the ionic compound formed by these two ions, you simply combine them in a way that balances their charges. Since the charges are already equal and opposite, you just need to put them together:
Na+ & F- → NaF
The resulting ionic compound is sodium fluoride (NaF). To write formulas for other ionic compounds, follow the same process:
1. Identify the cation and anion involved.
2. Determine the charges of each ion.
3. Balance the charges by adjusting the number of ions as needed.
4. Write the formula, placing the cation first followed by the anion.
Remember to always ensure that the charges are balanced, and the resulting compound is neutral. This method will allow you to write ionic compound formulas effectively.

Learn more about ionic compound here

https://brainly.com/question/28759239

#SPJ11

"The information that should be included on a label for a peroxide-forming chemical is - Date received, date opened, and date to discard".

The information that should be included on a label for a peroxide-forming chemical is the date received, date opened, and date to discard. This information is essential to ensure the safe handling and storage of the chemical.

It is important to keep track of when the chemical was received, as well as when it was opened, in order to determine its shelf life and prevent any potential hazards.

Additionally, including the date to discard on the label ensures that the chemical is not used beyond its safe and effective period.

Visit here to learn more about Chemicals:

brainly.com/question/29886197

#SPJ11

The correct answer to the question is b. Sulfur dioxide. Air pollution, particularly sulfur dioxide, can cause significant damage to plant life by interfering with their chlorophyll production.

Chlorophyll is a green pigment that is essential for photosynthesis, the process by which plants produce food. Sulfur dioxide and other pollutants can block sunlight, reduce water availability, and damage the delicate structures that produce chlorophyll in leaves. The damage caused by air pollution can result in stunted growth, yellowing leaves, reduced yield, and in extreme cases, death of the plant. To reduce the impact of air pollution on plant life, it is important to reduce emissions of harmful pollutants from industries and vehicles, and to promote the use of clean energy sources. Additionally, planting more trees and other vegetation can help to absorb some of the pollutants and improve air quality in urban areas.

learn more about Sulfur dioxide refer: https://brainly.com/question/31142164

#SPJ11

Answer:

limitting reactant = 7.79g

excess reactant = 16.517g

percentage yild =145.05%

Explanation:

you can read and understand from the image okey

Redox chemistry plays a crucial role in the workup process, particularly in the reaction of excess iodine with thiosulfate to form iodide and dithionate: [tex]I_2 (aq) + 2 S_2O_3^{2-} (aq)[/tex] → [tex]2 I^- (aq) + S_4O_6^{2-} (aq)[/tex]. The practical advantage of reducing excess iodine to iodide lies in the improved isolation and purification of the desired product.

In many chemical reactions, excess reactants are often used to ensure complete conversion of the limiting reactant to the product. However, the presence of excess reactants can also lead to the formation of unwanted side products or impurities. In this case, excess iodine can potentially interfere with the desired product's properties, affecting its purity and yield.

By reducing excess iodine to iodide using thiosulfate, we eliminate the possibility of it interfering with the desired product. Iodide ions are less reactive than iodine, thus minimizing unwanted side reactions. Additionally, the products of this redox reaction, iodide and dithionate, are typically more soluble in water, which simplifies their removal from the reaction mixture through aqueous washes or filtration.

In conclusion, reducing excess iodine to iodide using thiosulfate in the workup process provides a practical advantage by facilitating the isolation and purification of the desired product. This step prevents potential interference from excess iodine, minimizes side reactions, and simplifies the removal of reaction by-products, ultimately leading to a higher purity and yield of the target compound.

To know more about iodine, refer to the link below:

https://brainly.com/question/24133279#

#SPJ11

Body of Knowledge: A History of Anatomy (in 3 Parts) studied the act of anatomizing as a complex social and cultural activity rather than as a method of mapping a finite arrangement of bodily structures.

Thus, The exhibit narrative used a diachronic viewpoint to cut through the variety of anatomical practices and present three significant periods in the history of anatomy.

The sixteenth-century dissections and anatomical drawings, the nineteenth-century anatomical practices, and the modern use of both cadavers and digital technology for anatomic education.

"Body of Knowledge" made an effort to convey the intricacy of the numerous individuals, locations, and meanings related to human dissection.

Thus, Body of Knowledge: A History of Anatomy (in 3 Parts) studied the act of anatomizing as a complex social and cultural activity rather than as a method of mapping a finite arrangement of bodily structures.

Learn more about Current body, refer to the link:

https://brainly.com/question/12819508

#SPJ1

The chemical symbol N-14 indicates that this atom is nitrogen-14, which means it has a mass number of 14. the N-14 atom has 7 protons, 7 neutrons, and 7 electrons

The mass number is the sum of the number of protons and neutrons in the nucleus of an atom. Since nitrogen has an atomic number of 7, it also has 7 protons in its nucleus. This means that the number of neutrons in the nucleus must be 14-7=7.
As for electrons, the number of electrons in an atom is equal to the number of protons. This is because an atom is electrically neutral, meaning it has an equal number of positive charges (protons) and negative charges (electrons). Therefore, nitrogen-14 has 7 electrons orbiting around its nucleus.
In summary, nitrogen-14 has 7 protons, 7 neutrons, and 7 electrons. The number of protons and electrons determine the chemical properties of an element, while the number of neutrons affects its nuclear stability and isotopic properties.

learn more about nitrogen Refer: https://brainly.com/question/10260456

#SPJ11

When drawing the Lewis structure of the HCN molecule, the elements involved include a total of 10 valence electrons.

Thus, there should be bonds in the structure to make it stable. The carbon atom should be in the center with a single bond to the nitrogen atom, and a triple bond to the hydrogen atom. This arrangement allows for each atom to have a full outer shell of electrons, making the molecule more stable.
Drawing the Lewis structure of the HCN molecule, you first need to identify the total number of valence electrons. In the HCN molecule, there are three elements: hydrogen (H), carbon (C), and nitrogen (N). Hydrogen has 1 valence electron, carbon has 4 valence electrons, and nitrogen has 5 valence electrons. Therefore, the total number of valence electrons in HCN is 10.

To create a stable Lewis structure, you need to form bonds between the atoms. In HCN, there should be 3 bonds in the structure: one bond between hydrogen and carbon, and a triple bond between carbon and nitrogen. The carbon atom should be in the center with hydrogen and nitrogen atoms on either side, as carbon has the lowest electronegativity of the three elements.
Here's a step-by-step explanation for drawing the HCN Lewis structure:
1. Arrange the atoms: Place carbon (C) in the center, with hydrogen (H) on one side and nitrogen (N) on the other side

2. Distribute the valence electrons: Add one electron between H and C to form a single bond, then place six electrons between C and N to create a triple bond. Finally, add the remaining three electrons as lone pairs to nitrogen.
3. Check for stability: Ensure that each atom has a complete octet. In HCN, hydrogen has 2 electrons, carbon has 8 electrons, and nitrogen has 8 electrons, making the structure stable.
The final Lewis structure for HCN is:
H - C ≡ N

Visit here to learn more about Lewis structure:

brainly.com/question/20300458

#SPJ11

The typical reaction type for halogenoalkanes is nucleophilic substitution. Halogenoalkanes are organic compounds that contain at least one halogen atom (fluorine, chlorine, bromine, or iodine) bonded to a carbon atom. These halogen atoms are electronegative and tend to attract electrons towards themselves, making the carbon-halogen bond polarized.

In nucleophilic substitution reactions, a nucleophile (an electron-rich species) attacks the carbon atom bonded to the halogen, resulting in the displacement of the halogen atom by the nucleophile. This results in the formation of a new bond between the nucleophile and the carbon atom, and the expulsion of the halogen as a leaving group. The mechanism of nucleophilic substitution reactions varies depending on the nature of the nucleophile and the leaving group, as well as the structure of the halogenoalkane.Nucleophilic substitution reactions are an important class of reactions in organic chemistry, and halogenoalkanes are widely used as substrates in such reactions. The nucleophilic substitution reactions of halogenoalkanes can be used to prepare a variety of other organic compounds, including alcohols, ethers, amines, and carboxylic acids.In contrast, electrophilic substitution, electrophilic addition, and nucleophilic addition reactions are less common for halogenoalkanes. Electrophilic substitution reactions involve the addition of an electrophile (an electron-deficient species) to an organic compound, whereas electrophilic addition reactions involve the addition of an electrophile to a carbon-carbon double bond. Nucleophilic addition reactions involve the addition of a nucleophile to a carbon-carbon double bond.

Learn more about atoms here

https://brainly.com/question/17545314

#SPJ11

The correct form for the half-life expression for a second-order reaction is: t1/2 = 1 / k[A]₀

In a second-order reaction, the rate of the reaction is proportional to the square of the concentration of the reactant:

rate = k[A]²

where k is the rate constant and [A] is the concentration of the reactant.

We must ascertain how long it takes for half of the reactant's initial concentration to be consumed in order to calculate the reaction's half-life. The reactant's concentration ([A]) is equal to half its starting concentration ([A]0) at the half-life:

[A] = 1/2 [A]₀

This results when this is substituted into the second-order rate equation:

[tex]rate = k(1/2 [A]₀)²[/tex]

[tex]rate = k[A]₀² / 4[/tex]

Solving for k, we get:

[tex]k = 4 rate / [A]₀²[/tex]

Substituting k into the second-order rate equation gives:

[tex]rate = (4 rate / [A]₀²) [A]²[/tex]

[tex]rate = 4 rate [A]² / [A]₀²[/tex]

[tex][A] / [A]₀² = (1 / 4) t[/tex]

where t is the reaction time.

At the half-life, [A] / [A]₀ = 1/2, so we can substitute this into the above equation to obtain:

[tex](1/2) [A]₀² / [A]₀² = (1 / 4) t1/2[/tex]

Simplifying this gives:

[tex]t1/2 = 1 / k[A]₀[/tex]

Therefore, the correct form for the half-life expression for a second-order reaction is t1/2 = 1 / k[A]₀.

For such more question on reaction:

https://brainly.com/question/24795637

#SPJ11

Hybridization is a mathematical combination of standard atomic orbitals to form hybrid atomic orbitals, where all of the standard atomic orbitals contribute to the formation of a single hybrid atomic orbital. This concept plays a crucial role in understanding the molecular structure, geometry, and bonding in chemistry.

In a molecule, atoms form chemical bonds with each other by sharing electrons. The electrons are present in atomic orbitals, which are distinct energy levels surrounding the nucleus. The standard atomic orbitals, such as s, p, d, and f orbitals, have specific shapes and orientations.

However, when atoms bond, the standard atomic orbitals often don't align optimally for effective electron sharing. To address this issue, hybridization occurs. This process combines the standard atomic orbitals into new orbitals that can better overlap with the orbitals of other atoms, facilitating stronger and more directional bonding.

The resulting hybrid orbitals, such as sp, sp2, and sp3, are mixtures of the original atomic orbitals, and their number always matches the number of orbitals that were combined. For example, when one s and one p orbital hybridize, two sp orbitals are formed. Hybrid orbitals arrange themselves to maximize the angle between them, which leads to different molecular geometries such as linear, trigonal planar, and tetrahedral.

In summary, hybridization is a vital concept that allows atoms to form more effective bonds with each other by mathematically combining standard atomic orbitals into hybrid atomic orbitals. This process is essential for understanding molecular structure, geometry, and bonding properties in chemistry.

To know more about hybridization, refer to the link below:

https://brainly.com/question/30230127#

#SPJ11

The advantage of a galvanic anode system in soil compared to an impressed current system, as listed in a written examination, is that no external power is required. Galvanic anode systems rely on the natural electrochemical reaction between the anode material and the soil to provide protection against corrosion, while impressed current systems require an external power source to drive the protection.

This can make galvanic anode systems more cost-effective and simpler to install and maintain. The other options listed in the question (current adjustability, suitability for high resistivity soil, and high current capacity) are not advantages of galvanic anode systems in comparison to impressed current systems.

A galvanic anode, or sacrificial anode, is the main component of a galvanic cathodic protection system used to protect buried or submerged metal structures from corrosion.

Galvanic protection consists of applying a protective zinc coating to the steel to prevent rusting. The zinc corrodes in place of the encapsulated steel. These systems have limited life spans. The sacrificial anode protecting the underlying metal will continue to degrade over time.

TO KNOW MORE ABOUT  a galvanic anode system CLICK THIS LINK -

brainly.com/question/29784727

#SPJ11

Hydrogen chloride is considered a gas that is created when hydrogen gas and chlorine gas react and blend  together.

The required balanced chemical equation for the given question is

H₂(g) + Cl₂(g) → 2HCl(g)

Hydrogen chloride (HCl) is a type compound that includes the  elements hydrogen and chlorine, which is a gas at room temperature and pressure.

Hence, the particle diagram for the reaction container before the reaction would contain four hydrogen molecules (each consisting of two hydrogen atoms) and two chlorine molecules (each consisting of two chlorine atoms) as separate particles.

TheThe particle diagram for the reaction container after the reaction would contain two hydrogen chloride molecules (each consisting of one hydrogen atom and one chlorine atom) as separate particles.

To learn more about Hydrogen Chloride

https://brainly.com/question/19793109

#SPJ4

an experiment where a Gummy Bear is sacrificed for the sake of science The 2nd part of the experiment involves tossing a Gummy Bear into molten potassium chlorate. As a result, the sucrose reacts with oxygen and generates purple sparks and a lot of heat and The balanced reaction looks like :

C₁₂H₂₂O₁₁ (s) + 8KClO₃ (s) =  12CO₂ (g) + 11H₂O (g) + 8KCl (s)

When the potassium chlorate is heated, it decomposes into potassium chloride and oxide, as seen below:

2KClO₃(s) =  2KCl(s) + 3O₂(g)

When the gummy bear is dropped, the oxide from the decomposition of potassium chlorate reacts with the glucose molecule in sucrose. This reaction is a spontaneous combustion reaction:

C₆H₁₂O₆ (s) + 6O₂(g) = 6CO₂(g) + 6H₂O (g)

The overall reaction is seen below:

C₁₂H₂₂O₁₁ (s) + 8KClO₃ (s) =  12CO₂ (g) + 11H₂O (g) + 8KCl (s)

Learn more about Sucrose, here:

https://brainly.com/question/29186350

#SPJ1

The correct answer is B (Boron) and Al (Aluminum).

To determine this, we need to examine the electron configurations of each element:

a. B (Boron) - Electron configuration: 1s² 2s² 2p¹
b. Al (Aluminum) - Electron configuration: 1s² 2s² 2p⁶ 3s² 3p¹
c. S (Sulfur) - Electron configuration: 1s² 2s² 2p⁶ 3s² 3p⁴
d. Cl (Chlorine) - Electron configuration: 1s² 2s² 2p⁶ 3s² 3p⁵

The elements with 1 unpaired electron in the ground state are:
a. B (Boron) - has 1 unpaired electron in the 2p orbital
b. Al (Aluminum) - has 1 unpaired electron in the 3p orbital

So, the correct answer is B (Boron) and Al (Aluminum).

To know more about ground state, refer

https://brainly.com/question/30546051

#SPJ11

When patients are only allowed to have ice chips, it means that they are not allowed to have any fluids except for the ice chips. Ice melts down to 1/2 the volume of water, which means that if you have 220 ml of ice, it will melt down to 110 ml of water. Similarly, if you have 150 ml of ice, it will melt down to 75 ml of water.

Now, the patient ate all of the ice given to him at both 9:00 a.m. and 11:00 a.m., which means that he consumed all of the water that was in the ice. Therefore, the patient consumed 110 ml + 75 ml = 185 ml of water.
It is important to note that when patients are only allowed to have ice chips, it is because they may have medical conditions that restrict their fluid intake. Therefore, it is crucial to monitor their fluid intake carefully and ensure that they are getting the appropriate amount of fluids they need to maintain their health.
In conclusion, if a patient is only allowed to have ice chips, and they consume 220 ml of ice at 9:00 a.m. and 150 ml of ice at 11:00 a.m., then they will have consumed 185 ml of water. It is important to monitor their fluid intake carefully to ensure they receive the proper amount of fluids to maintain their health.

for more such questions on   fluids

https://brainly.com/question/13116910

#SPJ11

The portable reference electrode commonly used for measurements in seawater is the SCE (Saturated Calomel Electrode). The SCE has a stable and reproducible potential,

which makes it ideal for use in harsh environments such as seawater. It is easy to use and can provide accurate measurements of various parameters in seawater, including pH, conductivity, and redox potential. Additionally, SCEs have a long shelf life, making them a cost-effective option for fieldwork. Overall, the SCE is a reliable and convenient choice for reference electrode in seawater measurements

Learn more about Portable Reference Electrode here:

https://brainly.com/question/31725992

#SPJ11

The enthalpy change for the reaction is -114.2 kJ for the formation of 2 moles of [tex]\mathrm{NO_2}$.[/tex] Therefore, the correct answer is (C) -342.6 kJ.

The given thermochemical equation is:

[tex]\begin{equation}2\mathrm{NO}(g) + \mathrm{O}_2(g) \rightarrow 2\mathrm{NO}_2(g)\end{equation}[/tex]

[tex]\begin{equation}\Delta H = -114.2\mathrm{kJ}\end{equation}[/tex]

This means that for every 2 moles of NO reacted and 1 mole of [tex]\mathrm{O_2}$.[/tex] reacted, 2 moles of [tex]\mathrm{NO_2}$.[/tex] are produced with a change in enthalpy of -114.2 kJ.

To find the change in enthalpy for the given mass of [tex]\mathrm{NO_2}$.[/tex](138.03 g), we need to first calculate the number of moles of [tex]\mathrm{NO_2}$.[/tex] produced.

The molar mass of [tex]\mathrm{NO_2}$.[/tex] is:

[tex]\begin{equation}\mathrm{M}( \mathrm{NO_2}) = 14.01\mathrm{g/mol} + 2 \times 16.00\mathrm{g/mol} = 46.01\mathrm{g/mol}\end{equation}[/tex]

The number of moles  [tex]\mathrm{NO_2}$.[/tex] produced is therefore:

n(NO2) = mass/M(NO2) = 138.03 g / 46.01 g/mol = 3.00 mol

According to the stoichiometry of the equation, 2 moles of [tex]\mathrm{NO_2}$.[/tex] are produced for every 2 moles of NO and 1 mole of . This means that the number of moles of NO  [tex]\mathrm{O_2}$.[/tex] required to produce 3.00 moles of [tex]\mathrm{NO_2}$.[/tex]are:

n(NO) = n([tex]\mathrm{O_2}$.[/tex]) = (2/2) * 3.00 mol = 3.00 mol

The change in enthalpy for the production of 3.00 moles of [tex]\mathrm{O_2}$.[/tex] is:

ΔH = nΔH° = 3.00 mol * (-114.2 kJ/mol) = -342.6 kJ

Therefore, the correct answer is (C) -342.6 kJ.

Learn more about stoichiometry

https://brainly.com/question/30215297

#SPJ4

Answer:

Pyrophoric substances ignite spontaneously in air at or below 55 °C (130 °F) due to an exothermic reaction with oxygen. Examples of pyrophoric substances include alkali metals, such as sodium and potassium, and certain metal hydrides and alkyls.

Explanation:

The correct formula for dichlorine pentoxide is Cl2O5. This compound is an oxide of chlorine and is composed of two chlorine atoms and five oxygen atoms.

The prefix "di" in the name of the compound indicates that there are two chlorine atoms, while "pent" in the name indicates that there are five oxygen atoms. The formula for dichlorine pentoxide can be determined by following the rules of chemical nomenclature and combining the symbols for the elements and their respective subscripts. In this case, the formula can be written as Cl2O5, indicating that there are two chlorine atoms and five oxygen atoms in each molecule of dichlorine pentoxide. This compound is highly reactive and can decompose explosively when exposed to water, making it an important chemical to handle with care. In summary, the correct formula for dichlorine pentoxide is Cl2O5, which represents the specific ratio of the elements in the compound.

To learn more about dichlorine pentoxide, refer:-

https://brainly.com/question/15785618

#SPJ11

[tex]K_{sp[/tex], solubility product constant for SrCO₃ is approximately 9.3 x 10⁻¹⁰.

To find the solubility product constant ([tex]K_{sp[/tex]) for SrCO₃, we'll first need to write the balanced chemical equation and determine the molar solubility.

Balanced chemical equation: SrCO₃(s) ⇌ Sr²⁺(aq) + CO₃²⁻(aq)

From the given solubility of 0.0045 g/L, we can calculate the molar solubility. The molar mass of SrCO₃ is approximately 147.63 g/mol.

Molar solubility = (0.0045 g/L) / (147.63 g/mol) ≈ 3.05 x 10⁻⁵ mol/L

Now, let's express the equilibrium concentrations in terms of x, where x is the molar solubility of SrCO₃:

[Sr²⁺] = x = 3.05 x 10⁻⁵ mol/L

[CO₃²⁻] = x = 3.05 x 10⁻⁵ mol/L

[tex]K_{sp[/tex] is the product of the equilibrium concentrations of the ions:

[tex]K_{sp[/tex] = [Sr²⁺][CO₃²⁻] = (3.05 x 10⁻⁵)(3.05 x 10⁻⁵) ≈ 9.30 x 10⁻¹⁰

Rounded to two significant digits, [tex]K_{sp[/tex] for SrCO₃ at 25°C is approximately 9.3 x 10⁻¹⁰.

To know more about solubility product constant, refer to the link below:

brainly.com/question/31605015#

#SPJ11

CaCl2 in 2.12 moles is the solution. This can be found by multiplying the supplied mass (23.4 grammes) by the CaCl2 molar mass (110.98 grams/mole), which is the inverse of the mass given.

We can obtain 0.2106 moles by dividing 23.4 grammes by the ratio of CaCl2's molar mass (1/110.98). The result of multiplying this number by the multiplier (2) is 2.12 moles of CaCl2.

We may use the following formula to determine how many moles of CaCl2 are present in the solution:

Molar mass divided by mass equals a mole.

where the mass is said to be 23.4 grammes and CaCl2's molar mass is 110.98 grams/mole.

As a result of dividing the mass by the molar mass:

110.98 g/mol / 23.4 g = 0.2106 moles

CaCl2 is thus present in the solution in 0.2106 moles.

We may multiply the number of moles by the multiplier, which in this case is 2, to get how many moles of CaCl2 are contained in 2.12 moles of the solution:

2 times 0.2106 moles equals 0.4212 moles.

As a result, 2.12 moles of the solution contain 0.4212 moles of CaCl2.

Learn more about  CaCl2  at:

https://brainly.com/question/15737177

#SPJ1

Answer:The correct answer is B

Explanation:

Mr. Di IORIO's monthly payment will be $1,191.06.

We can use the formula for the monthly payment of a loan:

M = P [ i(1 + i)^n ] / [ (1 + i)^n - 1 ]

Where

We must first determine the quarterly interest rate, which is determined by:

r = 4.2% / 4 = 0.0105

The total number of monthly payments over the loan's duration must then be determined:

n = 4 years x 4 quarters per year x 3 months per quarter = 48 months

Now that the data have been entered, we can solve for the monthly payment:

M = $50,000 [ 0.0105(1 + 0.0105)^48 ] / [ (1 + 0.0105)^48 - 1 ]

M = $1,191.06

Therefore, Mr. Di IORIO's monthly payment will be $1,191.06.

Learn more about monthly payment here : brainly.com/question/28106777

#SPJ1