Write out the first four terms of the Maclaurin series of f if

f(0) = 8, f'(0) = 5, f"(0) = 10, f''(0) = 36 (Use symbolic notation and fractions where needed. )

f(x) =

Answer:

y is 96 when x is 12

Step-by-step explanation:

If x and y vary directly, it means that they are proportional to each other. Mathematically, we can write this relationship as:

y = kx

where k is the constant of proportionality.To find the value of k, we can use the information given in the problem. We know that when x is 6, y is 48. Substituting these values in the equation above, we get:

48 = k * 6

Solving for k, we get:k = 8

Now that we know the value of k, we can use the equation to find y when x is 12:

y = kx

y = 8 * 12

y = 96

Therefore, when x is 12, y is 96.

also in my head I just said if 12 is double of 6, just double 48, which is 96. but that doesn’t always work so that’s why I provided “correct” work above

Answer:

Step-by-step explanation:

Blank 1: In this study, 5 treatment conditions were compared
Blank 2: There were 60 individuals who participated in the entire study

The Independent Samples t Test is extended by the One-way ANOVA (In independent samples t test used to compare the means between two independent groups, whereas in one-way ANOVA, means are compared among three or more independent groups).

Whereas a two-way ANOVA employs two independent variables, a one-way ANOVA just uses one.

Example of One-Way ANOVA You want to examine how three different fertilizer combinations affect crop yield as an agricultural researcher.

ANOVA comes in two primary flavours: one-way (also known as unidirectional) and two-way. ANOVA can also take several forms.

The mean of a quantitative variable is estimated using a two-way ANOVA in relation to the values of two categorical variables

Blank 1: In this study, 5 treatment conditions were compared (the number of conditions is one more than the first number in the F-statistic, which is 4).

Blank 2: There were 60 individuals who participated in the entire study (you can calculate this by adding the two numbers in the F-statistic and then adding 1,

so 4 + 55 + 1 = 60).

learn more about One-way ANOVA

https://brainly.com/question/30763604

#SPJ11

Answer:

The quotient of the rational expressions shown below is:

(x²-4-4x+4) / 1

Simplifying the numerator:

(x²-4-4x+4) = (x²-4x) + (4-4) = x(x-4)

Therefore, the quotient is:

x(x-4) / 1 = x(x-4)

Step-by-step explanation:

The amount in the account after 12 years is approximately $466,197.. The amount of interest earned over 12 years is approximately $139,725.

We can use the formula for the future value of an annuity to calculate the amount in the account after 12 years:

FV = PMT * ((1 + r/12)^n - 1) / (r/12)

where PMT is the monthly deposit, r is the annual interest rate (as a decimal), n is the total number of payments, and FV is the future value of the annuity.

In this case, we have:

PMT = $2,449

r = 0.048

n = 12 * 12 = 144

Plugging these values into the formula, we get:

FV = $2,449 * ((1 + 0.048/12)^144 - 1) / (0.048/12)

FV ≈ $466,197

Therefore, the amount in the account after 12 years is approximately $466,197.

To calculate the amount of interest earned, we can subtract the total amount of deposits over 12 years from the total amount in the account:

Interest = FV - (PMT * n)

Interest = $466,197 - ($2,449 * 144)

Interest ≈ $139,725

Therefore, the amount of interest earned over 12 years is approximately $139,725.

To learn more about payments visit:

https://brainly.com/question/15136793

#SPJ11

Answer:

If the first digit cannot be 8, there are 9 choices for the first digit (any digit from 1 to 9).

(a) If only odd digits are used, there are 5 choices for each of the remaining 6 digits (1, 3, 5, 7, or 9). Therefore, the total number of possible 7-digit telephone numbers with only odd digits is:

9 * 5 * 5 * 5 * 5 * 5 * 5 = 59,531,250

So there are 59,531,250 possible 7-digit telephone numbers if the first digit cannot be 8 and only odd digits are used.

Step-by-step explanation:

There are 50,000 possible 7-digit telephone number using only odd digits and with the first digit not being 8.

To determine the number of possible 7-digit telephone numbers using only odd digits and with the first digit not being 8, let's consider the following:

Odd digits: 1, 3, 5, 7, and 9
Number of odd digits: 5

a) Only odd digits are used:
For the first digit, there are 4 choices (1, 3, 5, and 7) since it cannot be 8. For the remaining 6 digits, we have 5 choices each (1, 3, 5, 7, and 9) since they can be any odd digit.

Step 1: First digit - 4 choices
Step 2: Second digit - 5 choices
Step 3: Third digit - 5 choices
Step 4: Fourth digit - 5 choices
Step 5: Fifth digit - 5 choices
Step 6: Sixth digit - 5 choices
Step 7: Seventh digit - 5 choices

To find the total number of possible 7-digit telephone numbers, multiply the number of choices for each digit together:

Total possibilities = 4 × 5 × 5 × 5 × 5 × 5 × 5 = 4 × 5^6 = 50,000

So, there are 50,000 possible 7-digit telephone numbers using only odd digits and with the first digit not being 8.

Learn more about number here:

brainly.com/question/16195818

#SPJ11

Answer:

  (c)  $37,174.98

Step-by-step explanation:

You want the future value of a quarterly payment of $1500 for 5 years into an account earning 8%, when payments are made at the beginning of the month.

You can use a suitable calculator (or spreadsheet) to find the future value of the series of payments. It will tell you the value is $37,174.98.

Alternatively, you can use the formula for the sum of a geometric sequence, with consideration given to the fact that the last payment earns a full quarter's interest.

  FV = P(1 +r/n)((1 +r/n)^(nt) -1)/(r/n)

  FV = 1500(1 +.08/4)((1.02^(4·5) -1)/(.02) ≈ 37174.976

The future value is $37,174.98.

__

Additional comment

The functions provided by a calculator or spreadsheet allow for payments to be made that the beginning or the end of the period. You need to make sure to select "beginning". That is the default for the calculator shown in the attachment.

The average total cost when Q=1000 is approximately 1003.

To find the average total cost when Q=1000 and given the total cost function TC = 100 + aQ + bQ² with a = 3 and b = 1, follow these steps:

1. Plug in the values of a, b, and Q into the total cost function:
TC = 100 + 3(1000) + 1(1000)²

2. Calculate the total cost:
TC = 100 + 3000 + 1000000 = 1003100

3. Calculate the average total cost by dividing the total cost by the quantity (Q):
Average Total Cost (ATC) = TC / Q = 1003100 / 1000 = 1003.1

4. Round the average total cost to the nearest integer:
ATC ≈ 1003

So, the average total cost when Q=1000 is approximately 1003.

total cost functionhttps://brainly.com/question/16177487

#SPJ11

The 90% confidence interval for the true proportion of students who had part-time jobs is from 0.374 to 0.526.

We have,
1. First, calculate the sample proportion (p) by dividing the number of students with part-time jobs (207) by the total number of students surveyed (460): p = 207/460 ≈ 0.450

2. Calculate the standard error (SE) using the formula SE = √(p (1 - p)/n), where n is the sample size:

SE ≈ √(0.450(1 - 0.450)/460) ≈ 0.046

3. Find the critical value (z) for a 90% confidence interval, which is 1.645.

4. Calculate the margin of error (ME) using the formula ME = z x SE:

ME ≈ 1.645 x 0.046 ≈ 0.076

5. Find the lower and upper limits of the confidence interval by adding and subtracting the margin of error from the sample proportion:

Lower limit ≈ 0.450 - 0.076 ≈ 0.374,

Upper limit ≈ 0.450 + 0.076 ≈ 0.526

Thus,
The 90% confidence interval for the true proportion of students who had part-time jobs is from 0.374 to 0.526.

Learn more about confidence intervals here:

https://brainly.com/question/17212516

#SPJ11

The clusters are not predefined but rather generated by the algorithm based on the data provided.

Answer:

Cluster analysis is an example of Unsupervised Learning.

In unsupervised learning, the algorithm is given a dataset without any predefined labels or categories, and it is tasked with discovering patterns and relationships within the data on its own. Cluster analysis is one of the most commonly used techniques in unsupervised learning, where the algorithm is used to group similar records together into clusters based on their similarities.

The statement "Cluster analysis aims to group similar records into predefined clusters" is false.

Cluster analysis is used to group similar records together based on their similarities, but the clusters themselves are not predefined. In other words, the algorithm discovers the clusters on its own based on the characteristics of the data. Therefore, the clusters are not predefined but rather generated by the algorithm based on the data provided.

To learn more about themselves visit:

https://brainly.com/question/9168553

#SPJ11

Step-by-step explanation:

that means 2 blue or 2 red or 2 green.

12 marbles in total.

when the first marble is picked, there are only 11 left.

a probability is always the ratio of

desired cases / totally possible cases

the probabilty to pull first a blue marble is

5/12 = 0.416666666...

if that is the case, then the probabilty for the second marble to be blue too is

4/11 = 0.363636363...

(there are only 4 blue marbles in a total of 11 marbles).

and the probabilty for getting 2 blue marbles is

5/12 × 4/11 = 20/132 = 5/33 = 0.151515151...

the probabilty to pull first a red marble is

4/12 = 1/3 = 0.333333333...

if that is the case, then the probabilty for the second marble to be red too is

3/11 = 0.272727272...

(there are only 3 red marbles in a total of 11 marbles).

and the probabilty for getting 2 red marbles is

1/3 × 3/11 = 3/33 = 1/11 = 0.0909090909...

the probabilty to pull first a green marble is

3/12 = 1/4 = 0.25

if that is the case, then the probabilty for the second marble to be green too is

2/11 = 0.181818181...

(there are only 2 green marbles in a total of 11 marbles).

and the probabilty for getting 2 green marbles is

1/4 × 2/11 = 2/44 = 1/22 = 0.045454545...

the probabilty to have any of these 3 mutually exclusive cases (to get a pair of the same color) is the sum of the probabilities :

0.151515151... + 0.09090909... + 0.045454545... =

5/33 + 1/11 + 1/22 = 10/66 + 6/66 + 3/66 = 19/66 =

= 0.287878787...

The actual sum of the quarter dollars is determined as $ 1.25.

The actual sum of the quarter dollars is calculated by summing up all the individual coins.

For the diagram given, we have a total of;

1 quarter dollar + 1 quarter dollar  + 1 quarter dollar  + 1 quarter dollar + 1 quarter dollar = 5 quarter dollars

A quarter dollar  or 1 quarter dollar = 25 cent = $0.25

The total sum of the quarter dollars is calculated as;

= $0.25 + $0.25 + $0.25 + $0.25 + $0.25

= $ 1.25

Thus, the total sum of the quarter dollars has been obtained in dollar equivalent.

Learn more about quarter dollars here: https://brainly.com/question/2331661

#SPJ1

In this table, for every increase of 2 in the number of string instruments, there is a corresponding increase of 4 in the number of percussion instruments. Therefore, the ratio of string instruments to percussion instruments is always 2:1, indicating a constant of proportionality of 2.

However, rather than being started by plucking or sliding a bow across the strings, those vibrations on a piano are started by hammers striking the strings. Consequently, the piano is a type of percussion instrument. Because of this, the piano is now typically regarded as both a stringed and percussive instrument.

The table that shows a constant of proportionality of 2 for the ratio of string instruments to percussion instruments is:

String Percussion

2 4

4 8

6 12

Learn more about string instruments visit: brainly.com/question/29844951

#SPJ4

Correct Question:

Which table shows a constant of proportionality of 2 for the ratio of string instruments to percussion instruments?

The product of the terms   [tex](d - 9)[/tex]  and  [tex](2d^{2} + 11d -4)[/tex]  will be [tex](2d^{3} - 7d^{2} - 103d + 36)[/tex].

We have to find the product of two terms.

First term = (d - 9)

Second term = [tex](2d^{2} + 11d -4)[/tex]

To find the product of these two terms, we will be using the distributive property. According to the distributive property, when we multiply the sum of two or more addends by a number, it will give the same result as when we multiply each addend individually by the number and then add the products together.

We have to find :  [tex](d - 9) (2d^2 + 11d -4)[/tex]

Using the distributive property,

[tex]d * 2d^{2} + d * 11 + d * (-4) - 9 * 2d^2 - 9 * 11d - 9 * (-4)[/tex]

After further multiplication, we get

[tex]2d^{3} + 11d^2 - 4d - 18d^{2} - 99d + 36[/tex]

Now, combine all the like terms.

[tex]2d^{3} + 11d^{2} - 18d^{2} - 4d - 99d + 36[/tex]

[tex]2d^{3} - 7d^{2} - 103d + 36[/tex]

Therefore, the product of d-9 and 2d^2 + 11d -4 is [tex]2d^{3} - 7d^{2} - 103d + 36[/tex]

To learn more about the product and distributive property;

https://brainly.com/question/2807928

#SPJ4

A ray is a half-infinite line. The pairs of non-overlapping angles that share a ray to make a right angle are ∠FGE and ∠FGH.

Since, We know that;

A half-infinite line (also known as a half-line) with one of the two points and is commonly used to represent a ray. It is assumed to be infinite.

A straight line has an angle of measurement of 180°. And a 90° angle is made when two lines are perpendicular to each other.

As we can see the line EGH is a straight line, and FG is another line that is perpendicular to line EH,

Therefore, it will form two angles measuring 90°. These angles will be ∠FGE and ∠FGH.

Hence, the pairs of non-overlapping angles that share a ray to make a right angle are ∠FGE and ∠FGH.

Learn more about Ray visit:

brainly.com/question/17491571

#SPJ1

The longest possible distance that the couple of frogs can create between each other is (n-1)/2, where n is the number of blocks from 0 to n-1.

To understand why, we can think about two cases: when n is odd and when n is even.

When n is odd, the two frogs can start at the ends of the line, with one frog on block 0 and the other frog on block n-1. They can then both jump to the middle block (block (n-1)/2) and create a distance of (n-1)/2 between them.

When n is even, the two frogs cannot start at the ends of the line because there is no middle block. However, they can start on adjacent blocks, such as blocks (n-2)/2 and (n+2)/2. They can then both jump to the block in the middle of the line (block n/2) and create a distance of (n-2)/2 between them.

In both cases, the longest possible distance between the two frogs is (n-1)/2.

To know more about longest possible distance, refer here:
https://brainly.com/question/12102113#
#SPJ11

To evaluate the integral of 5.3x^2 dx using trapezoidal rule with n = 10, we first need to break the interval [0, 5.3] into 10 subintervals of equal width. The width of each subinterval, h, is given by:

h = (b - a) / n = (5.3 - 0) / 10 = 0.53

where a = 0 is the lower limit of integration and b = 5.3 is the upper limit of integration.

Next, we need to calculate the function values at the endpoints of each subinterval. Let xi be the left endpoint of the ith subinterval, then:

x1 = 0
x2 = 0.53
x3 = 1.06
x4 = 1.59
x5 = 2.12
x6 = 2.65
x7 = 3.18
x8 = 3.71
x9 = 4.24
x10 = 4.77

Using these values, we can calculate the function values at each endpoint:

f(x1) = 5.3(0)^2 = 0
f(x2) = 5.3(0.53)^2 = 0.769547
f(x3) = 5.3(1.06)^2 = 6.119948
f(x4) = 5.3(1.59)^2 = 15.013238
f(x5) = 5.3(2.12)^2 = 28.451232
f(x6) = 5.3(2.65)^2 = 46.433928
f(x7) = 5.3(3.18)^2 = 68.961326
f(x8) = 5.3(3.71)^2 = 96.033426
f(x9) = 5.3(4.24)^2 = 127.650228
f(x10) = 5.3(4.77)^2 = 163.811732

Now, we can apply the trapezoidal rule formula to approximate the integral:

∫[0,5.3] 5.3x^2 dx ≈ h/2 * [f(x1) + 2f(x2) + 2f(x3) + ... + 2f(x9) + f(x10)]

Substituting the values we calculated above, we get:

∫[0,5.3] 5.3x^2 dx ≈ 0.53/2 * [0 + 2(0.769547) + 2(6.119948) + 2(15.013238) + 2(28.451232) + 2(46.433928) + 2(68.961326) + 2(96.033426) + 2(127.650228) + 163.811732]

∫[0,5.3] 5.3x^2 dx ≈ 614.660107

Therefore, the approximate value of the integral of 5.3x^2 dx using trapezoidal rule with n = 10 is 614.660107.

#SPJ11

Learn more about trapezoidal rule on: https://brainly.com/question/16996659

The retailer only purchases the product when a customer places an order, which reduces the financial risks associated with holding inventory.

Drop shipping is a supply chain management method in which a retailer does not keep goods in stock but instead transfers orders and shipment details to a manufacturer, wholesaler, or another retailer, who then ships the goods directly to the customer.

In drop shipping, the retailer acts as an intermediary between the customer and the supplier, without actually holding any inventory. The retailer displays the products on their online store, and when an order is placed, the retailer forwards the order details and shipment information to the supplier. The supplier then ships the product directly to the customer.

To effectively implement drop shipping, the retailer needs to have a good relationship with the supplier who is responsible for shipping the product. The supplier must have an integrated e-procurement and e-commerce platform to receive orders and track inventory. The supplier must also have local warehousing or distribution centers close to the customer's location to ensure quick delivery and minimize shipping costs.

Having good relationships with transportation companies is also critical for the success of drop shipping. Retailers must have reliable shipping partners that can handle the transportation of goods from the supplier to the customer.

Overall, drop shipping allows retailers to offer a wider range of products to customers without the need for inventory management or warehousing. The retailer only purchases the product when a customer places an order, which reduces the financial risks associated with holding inventory.

To learn more about management visit:

https://brainly.com/question/30222076

#SPJ11

Probabilities are calculated by dividing the number of favorable outcomes by the total number of possible outcomes. In this case, we need to know what the experiment or event is, and what the probability distribution of the outcomes looks like. Space directors refer to the three coordinate axes x, y, and z, which are used to describe three-dimensional space. Vectors are quantities that have both magnitude and direction and can be represented by arrows or line segments in space.

To find the probabilities of getting the values +1 and -1 for each of the space directors (x, y, z) and each of the vectors (luz, ld, liz, 107, 117, 18), follow these steps:

1. Determine the total number of possible outcomes for each vector. For example, if luz has 3 possible outcomes (+1, 0, -1), the total number of outcomes is 3.

2. Count the number of occurrences of +1 and -1 in each vector. For example, if luz has 1 occurrence of +1 and 1 occurrence of -1, then there are 2 occurrences of interest.

3. Calculate the probabilities by dividing the number of occurrences of interest by the total number of outcomes. For example, for luz, the probability of getting +1 or -1 is 2 occurrences of interest / 3 total outcomes = 2/3 or approximately 0.67.

Repeat these steps for each of the space directors (x, y, z) and vectors (ld, liz, 107, 117, 18) to find the probabilities of getting the values +1 and -1.

Learn more about probabilities at https://brainly.com/question/13604758

#SPJ11

Exponential kind of function best models the set of data points (-3, 18), (-2, 6), (-1, 2), (0, 11), and (1,27).

To figure out which sort of capability best models the given arrangement of pieces of information, we can plot them on a chart and outwardly review the state of the bend that interfaces them.

After plotting the given pieces of information, we can see that the bend that best fits them is certainly not a straight line (direct) or a parabola (quadratic), as it seems to bend all the more steeply. The bend that best fits these focuses is likewise not a steady capability (nothing unless there are other options), as the upsides of y change concerning x.

Consequently, the capability that best models the given arrangement of information focuses is a dramatic capability, which has a bend that increments or diminishes at a speeding up rate. An overall condition for a dramatic capability is:

y =[tex]ab^x[/tex]

where an and b are constants. We can utilize the given focuses to track down the upsides of an and b, and in this manner get the particular condition that models the data of interest.

To learn more about Exponential, refer:

https://brainly.com/question/31277575

#SPJ1

Answer:

$1,500

Step-by-step explanation:

167 x 9 = 1,503 rounded is 1,500 dollars

Hope this helps Good Luck

15bags of fiber stuffing will be needed to fill the cones

The volume of one replica ice cream cone is calculated as:

Volume = (1/3) × π × (radius)^2 × height

Radius = 4/2 = 2 inches

Height = 10 inches

Therefore, Volume = (1/3) × π × 2^2 × 10 = 83.78 cubic inches (rounded to two decimal places)

To fill 125 replica cones, the total volume of stuffing required will be:

Total Volume = 125 × 83.78 = 10,472.5 cubic inches

Since each bag of stuffing can fill 720 cubic inches, the number of bags required will be:

Number of bags = 10,472.5 / 720 = 14.55 (rounded up to the nearest whole number)

Learn more about volume at https://brainly.com/question/463363

#SPJ1

If the null hypothesis were true, the sample correlation would be expected to be near 0, and it is very unlikely to obtain a correlation as strong as -0.67.

a. The sample correlation between self-reported political orientation and support for the legalization of medical marijuana is r = -0.67. This negative correlation indicates that as political orientation becomes more conservative (higher score), support for the legalization of medical marijuana decreases (lower score). The correlation is moderate in size, which means that there is a meaningful relationship between these two variables.

b. The null hypothesis is that there is no correlation between self-reported political orientation and support for the legalization of medical marijuana in the population, symbolized as H0: ρ = 0. The alternative hypothesis is that there is a correlation in the population, symbolized as Ha: ρ ≠ 0.

c. The critical value for a two-tailed test with alpha level α = 0.05 and n = 30-2 = 28 degrees of freedom is ±2.048. The rejection regions are the two tails of the t-distribution with this critical value.

d. The appropriate t-test to answer this question is a two-tailed test of the population correlation coefficient using the formula: t = r√(n-2) / √(1-r^2). Plugging in the values from the sample, we get: t = -3.29.

e. We reject the null hypothesis because the calculated t-value (-3.29) falls outside the rejection region (±2.048). This means that the sample correlation is significantly different from 0, and we have evidence to support the alternative hypothesis that there is a correlation in the population. The p-value associated with the sample correlation is p < 0.01, which means that there is less than a 1% chance of obtaining a correlation as extreme as the one observed in the sample if the null hypothesis is true. This suggests strong evidence against the null hypothesis. If the null hypothesis were true, the sample correlation would be expected to be near 0, and it is very unlikely to obtain a correlation as strong as -0.67.

To learn more about hypothesis visit:

https://brainly.com/question/11560606

#SPJ11

In hypothesis testing, the null hypothesis (H0) is a statement that there is no significant difference between two groups, or that a certain parameter is equal to a specified value. In this case, the null hypothesis is that the mean difference is 0, meaning there is no significant difference between the two groups being compared.

The alternative hypothesis (Ha), on the other hand, is a statement that contradicts the null hypothesis. It can be one-tailed (directional), indicating that the mean difference is greater than or less than 0, or two-tailed (non-directional), indicating that the mean difference is not equal to 0. So, to determine the null and alternative hypotheses in this case, we know that the null hypothesis is that the mean difference is 0. The alternative hypothesis can be either one of the following:
- Ha: The mean difference is not equal to 0 (two-tailed)
- Ha: The mean difference is greater than 0 (one-tailed)
- Ha: The mean difference is less than 0 (one-tailed)

Learn more about hypothesis testing here:

https://brainly.com/question/30588452

#SPJ11

The coefficients of determination that are incorrect are -.88, 1.15, and 1.45.

The coefficient of determination, also known as R-squared, is a value between 0 and 1 that measures the proportion of variance in the dependent variable explained by the independent variable(s) in a regression model.

Values outside the range of 0 to 1, such as negative values or values greater than 1, are not valid coefficients of determination. In this case, -.88, 1.15, and 1.45 are incorrect because they fall outside the valid range.

The correct coefficients of determination in the given list are .77, .53, .11, and -.34. These values indicate the proportion of variance in the dependent variable explained by the corresponding independent variables in their respective regression models.

To know more about the coefficient of determination visit:

https://brainly.com/question/31601139

#SPJ11

Answer:

x=4

Step-by-step explanation:

as it's an equilateral each side will equal the same so the 12x will be the same as 10x+8

12x=10x+8

2x=8

x=4

if u substitute x into each equation

12×4=48

10×4+8=48

they equal the same

so x=4

As per the combination method, out of the 400 students surveyed, 380 students chose red as their favorite color.

To solve this problem, we can set up an equation. An equation is a statement that shows the equality between two expressions. In this case, we can write:

(Number of students who chose red) / (Total number of students) = 95/100

We can simplify 95/100 to 0.95. Multiplying both sides of the equation by 400 (the total number of students), we get:

Number of students who chose red = 0.95 * 400

Simplifying the right-hand side of the equation, we get:

Number of students who chose red = 380

To know more about combination here

https://brainly.com/question/28998705

#SPJ1

Answer: 204cm²

Step-by-step explanation:

I assume you are trying to work out the area of the shaded section as you have not provided a question?

1. To get the area of the whole rectangle we do length x width.

12 x 20 = 240.

2. To get the area of the triangle we do base x height, ÷ 2.

9 x 8 = 72

72 ÷ 2 = 36

3. Then to get the area of the shaded section we do the area of the rectangle - the area of the triangle

240 - 36 = 204

About 4.24% of all samples of 26 of today's women in their 20s have mean heights of at least 63.36 inches.

Since the sample size is 26, we can use the central limit theorem and assume that the distribution of sample means is approximately normal with a mean of 62.8 inches and a standard deviation of 1.65 inches / sqrt(26) = 0.323 inches.

To find the percentage of samples with mean heights of at least 63.36 inches, we need to find the z-score corresponding to this value:

z = (63.36 - 62.8) / 0.323 = 1.74

Using a standard normal distribution table or calculator, we can find that the percentage of samples with z-scores greater than or equal to 1.74 is about 4.24%. Therefore, about 4.24% of all samples of 26 of today's women in their 20s have mean heights of at least 63.36 inches.

To learn more about  heights visit:

https://brainly.com/question/11735272

#SPJ11

The dot plots are plotted and the heights are compared

Given data ,

The heights of the tennis and badminton teams are given

Tennis team’s height (in inches): 66, 67, 69, 70, 71, 73, 73, 74, 75, 75, 76

Range: 10

Mean: 71.73

Median: 73.00

Mode: [73,75]

Badminton team’s heights (in inches): 62, 62, 65, 66, 68, 71, 73

Range: 11

Mean: 66.71

Median: 66.00

Mode: [62]

Now , each data point in the dataset is represented by a dot placed above the corresponding value on the axis. If there are multiple data points with the same value, the dots are stacked vertically above that value.

So , the frequency of the plots are given

Hence , the dot plots are plotted and the graph is given

To learn more about dot plot click :

https://brainly.com/question/30986825

#SPJ1