In a physical change, the substance's shape or appearance changes, but the type of matter it contains stays the same. But when matter undergoes a chemical change, at least one new substance with novel properties is created.
What is a chemical change?Chemical synthesis, or, alternatively, chemical decomposition into two or more different substances, occurs when one substance reacts with another to create a new substance.
Physical modifications are those that affect a chemical substance's form but not its chemical composition. Physical changes are usually unable to separate compounds into chemical elements or simpler compounds, but they can be used to separate mixtures into their component compounds.
An overview was given as your information is incomplete.
Learn more about chemical change on:
https://brainly.com/question/19794032
#SPJ1
The reaction 2N2O5→2N2O4+O2 takes place at around room temperature in solvents such as CCl4. The specific rate constant at 293 K is found to be 2. 35×10−4s−1 and at 303 K the specific rate constant is found to be 9. 15×10−4s−1
the reaction's 2N2O5→2N2O4+O2 frequency factor at 303 K is A = 9.15 x 10^-4 s^-1 *
The specific rate constant (k) of a first-order reaction is given by the equation:
k = A*e^(-Ea/RT)
Where A is the frequency factor, Ea is the activation energy, R is the gas constant and T is the temperature in Kelvin.
Substituting for A:
A = k*e^(Ea/RT)
We know that the specific rate constant at 303 K is 9.15 x 10^-4 s^-1, and we can assume that the activation energy (Ea) and gas constant (R) are constant.
T = 303 K
Plugging in the known values we get
A = 9.15 x 10^-4 s^-1 * e^(Ea/R*303)
The frequency factor, A, is a measure of the number of collisions of reactant molecules per unit of time that have sufficient energy to overcome the activation energy barrier and form products. The value of A can be used to compare the relative rates of different reactions. The fact that the specific rate constant at 293 K is 2.35 x 10^-4 s^-1 and at 303 K is 9.15 x 10^-4 s^-1, indicates that the reaction rate increases with increasing temperature. This is consistent with the expected behavior of a first-order reaction, as an increase in temperature will increase the kinetic energy of the reactant molecules, making them more likely to collide with each other and form products.
Learn more about specific rate constant here:
https://brainly.com/question/16012644
#SPJ4
Search for the complete question is :
In solvents like CCl4, the reaction 2N2O52N2O4+O2 occurs at or near room temperature. At 293 K, the particular rate constant is discovered to be 2.35 104 s1, while at 303 K, it is discovered to be 9.15 104 s1. Determine the reaction's frequency factor at 303 K.
A tank fires a round of ammunition at a speed of 500 m/s. The round travels 2,000 m. How long did it take it to travel that far?
Answer:
To find out how long it took for the round to travel 2,000 m, we can use the formula:
time = distance / speed
In this case, the distance is 2,000 m and the speed is 500 m/s. So we can plug in these values:
time = 2000 m / 500 m/s
time = 4 seconds
So the round took 4 seconds to travel 2,000m.
150. 0 mL of oxygen is collected over water at 19. 0oC and 100. 0 kPa. If the dry volume becomes 100. 0 mL and the pressure of the dry gas becomes 105. 0 kPa, what will the new temperature be?
The new temperature be when 150.0 mL of oxygen is 68.6oC collected over water at 19.0oC and 100.0kPa and dry volume becomes 100.0 mL and the pressure of the dry gas becomes 105.0kPa
Given temperature of oxygen (T1) = 19.0oC = 273 + 19 = 292K
The volume of oxygen collected (V1) = 150mL
The pressure of oxygen (P1) = 100kPa
The pressure of dry gas becomes (P2) = 105kPa
The volume of dry gas becomes (V2) = 100mL
The new temperature is = T2
From Gas Laws we know that PV = nRT such that
P1V1/T1 = P2V2/T2
Then T2 = P2V2T1/P1V1
T2 = 105 x 100 x 292 / 100 x 150 = 204.4K = 68.6oC
Such that the new temperature obtained is 68.6oC
To learn more about oxygen click here https://brainly.com/question/13370320
#SPJ4
when small molecules are linked together to form larger molecules, the increase in entropy typically comes from:
When the small molecules are linked together to form the larger molecules, the increase in the entropy typically comes from : heat.
The entropy can be defined as the measure of the randomness or the disorder of the particular system. Some properties of the entropy is given as :
1) The SI unit of the entropy is J/Kmol
2) The entropy is the thermodynamic function.
3) The entropy is the state function.
4) The entropy is depends on the state system and not on the path.
Thus, the increase in the entropy comes in the form of heat when the small molecules are linked together to form the larger molecules.
To learn more about entropy here
https://brainly.com/question/14483037
#SPJ4
explain how the crystals of an igneous rock are used to help classify it
Igneous rocks are regarded as intrusive, despite the fact that they were essentially created from magma under the earth's surface.
How do you classify igneous rocks?Due to the diverse chemical composition, size, and structural characteristics of the rocks, igneous rock crystals are created.
Because igneous rock crystals are generated due to various chemical compositions, sizes, and structures, they are used to classify the rock itself. When lava cools and solidifies, igneous rocks are the type of rocks that are created.
Grain size, silica concentration, and silica saturation are used to categorize them. The pace of cooling determines the kind of igneous rock, with slow cooling leading to the construction of large crystals and rapid cooling to the production of microscopic crystals. The chemical makeup of the igneous rocks determines how they are categorized.
To learn more about igneous rocks refer to:
https://brainly.com/question/18297174
#SPJ1
which flask will have the greatest number of colli- sions per second with the walls of the container?
The flask will have the greatest number of collisions per second with the walls of the container is Flask A: CO at 760 torr and 0 °C.
The Collision of the molecules with the wall of the container will be depend on the pressure. Therefore, the flask with the highest pressure have the greatest no of the collisions. As flask A has the highest pressure of 760 torr, Therefore, the flask A has the greatest number of the collusions per second with the walls of the container.
Thus the flask A with CO gas will have the greatest number of collisions per second with the walls of the container.
This question is incomplete, the complete question is :
Consider three identical flasks filled with different gases.
Flask A: CO at 760 torr and 0 °C
Flask B: N₂ at 250 torr and 0 °C
Flask C: H₂ at 100 torr and 0 °C
which flask will have the greatest number of collisions per second with the walls of the container?
To learn more about gas here
https://brainly.com/question/23056914
#SPJ4
describe the main idea of this lab. in other words, what was the message this lab conveys about pollution?
Pollution refers the release of hazardous pollutants into the environment. These hazardous elements are referred to as contaminants. Pollutants may be naturally occurring, such as volcanic ash.
They may also be caused by human activities, such as factory runoff or waste. Pollutants have a negative impact on the quality of the air, water, as well as land.
Pollution refers the release of hazardous pollutants into the environment. These hazardous elements are referred to as contaminants. Pollutants may be naturally occurring, such as volcanic ash. They may also be caused by human activities, such as factory runoff or waste. Pollutants have a negative impact on the quality of both the air, water, as well as land.
To know more about Pollution
https://brainly.com/question/28519286
#SPJ4
chemist robert boyle created boyle’s law, the first law to describe what?
Robert Boyle created Boyle's Law, the first law to describe the inverse relationship between the pressure and volume of a gas at constant temperature.
Boyle's Law states that the pressure and volume of a gas are inversely proportional at a constant temperature. This means that as the volume of a gas increases, the pressure decreases and vice versa. Boyle's law is usually represented mathematically as PV=k, where P is the pressure of the gas, V is its volume, and k is a constant. Boyle's law was one of the first laws describing the behavior of gases and laid the foundation for the study of thermodynamics. It was a significant contribution to the field of chemistry and physics, and it is still widely used today in various applications such as in the design of gas storage tanks, scuba diving and many other fields.
To know more about Boyle's law click below:
https://brainly.com/question/1437490#
#SPJ4
Correctly classify each of the following compounds as highly soluble or as either slightly soluble or insoluble in water. NaCl, KOH, CH3CH2OH, CH3COOH, CH3OH, Na2SO4, CH2Cl2, CH3(CH2)5OH, C6H6, C6H14, CCl4, CHCl3, KNO3
The Highly Soluble : NaCl, KOH, CH₃CH₂OH, CH₃COOH, CH₃OH, Na₂SO₄, KNO₃
The Insoluble: C₆H₆, C₆H₁₄, CCl₄, CHCl₃, CH₂Cl₂, CH₃(CH₂)₅OH
1) NaCl : NaCl is a chloride and NaCl is highly soluble.
2) CH₃C l: This compound is an organic. The electronegativity between C and Cl is high, and is polar. Because water is also polar, it is highly soluble.
3) CH₃OH: Alcohols are hydrocarbon are is highly soluble in water because of hydrogen bonding.
4) KOH: KOH is highly soluble. This is a strong an readily dissociates in water.
5) C₆H₆ : It is the benzene ring and is a nonpolar molecule, so it is expect this is insoluble with water.
6) C₆H₁₄ : It is hexane of long chain of hydrocarbons. There is no hydrogen bonding, this is nonpolar and insoluble in water.
7) KNO₃: It is highly soluble because all nitrates are soluble in the water.
8) CCl₄ : There is balance of the partial charges which makes it a nonpolar. It is insoluble in water.
9) Na₂SO₄: It is highly soluble.
10) CH₃CH₂OH: It is highly soluble in water.
11) CH₂Cl₂ : This is polar and due this it is highly soluble in water.
12) CH₃COOH : It is a carboxylic acid. It is highly soluble in water.
To learn more about soluble here
https://brainly.com/question/2484768
#SPJ4
Which statement describes energy in a nuclear reaction?
- energy is destroyed as the nucleus of an atom breaks down
- energy is released from the nucleus of an atom
- energy is created from the nucleus of the atom
- nuclear reactions absorb energy, but do not release energy
"energy is created from the nucleus of the atom" describes energy in a nuclear reaction.
What is nuclear reaction?Nuclear reaction, a change in the identity or properties of an atomic nucleus caused by the bombardment of an energetic particle. The particle that is bombarding may be an alpha particle, a gamma-ray photon, a neutron, a proton, or a heavy ion. Nuclear reactions are collisions between two atomic nuclei or one atomic nucleus and a subatomic particle that produce one or more nuclides. Nuclear reactions produce nuclides that are distinct from the reacting nuclei (commonly referred to as the parent nuclei).
Here,
The phrase "energy is created from the nucleus of the atom" describes the generation of energy in a nuclear reaction.
To know more about nuclear reaction,
https://brainly.com/question/13315150
#SPJ1
4.aqueous solutions of hydrogen peroxide sold in pharmacies are usually approximately 3% h202 by mass. however, in solution, hydrogen peroxide decomposes into water and oxygen. what is the percent by mass of a solution of hydrogen peroxide, h2o2, prepare from 1.423 g of h202 which is titrated with 40.22 ml of 0.01143 mol/l kmno4(aq). the reaction occurs in an acidified solution (ans:2.747%) (hint: find mass of h202 actually present, then mass %) balanced equation: (aq) 502(9) 8h200 5h2o2(aq) 2mno4 (aq) 6h (aq) 2mn?
The percent by mass of the solution of H2O2 is 1.6547%, when hydrogen peroxide decomposes into water and oxygen.
How to calculate percent by mass of the solution?
To find the percent by mass of a solution of hydrogen peroxide (H2O2) prepared from 1.423 g of H2O2 that is titrated with 40.22 mL of 0.01143 M KMnO4(aq), you will need to determine the mass of H2O2 that is actually present in the solution.
The balanced equation for the reaction is:
2KMnO4(aq) + 3H2O2(aq) + 8H+(aq) --> 2MnO2(s) + 5O2(g) + 8H2O(l)
From the equation, we know that for every 2 moles of KMnO4(aq), 3 moles of H2O2(aq) are consumed. Therefore, the number of moles of H2O2 that are actually present in the solution can be determined by multiplying the moles of KMnO4 consumed by 3/2.
The moles of KMnO4 consumed can be determined by multiplying the volume of KMnO4 used by its concentration in mol/L.
So the moles of KMnO4 = 40.22 mL x 0.01143 mol/L = 0.459 mol
The moles of H2O2 present = (3/2) x 0.459 mol = 0.6885 mol
The mass of H2O2 present = 0.6885 mol x 34.02 g/mol = 23.55 g
Therefore, the percent by mass of the solution of H2O2 is (23.55 g / 1.423 g) x 100 = 1.6547 %
To learn more about hydrogen peroxide, visit: https://brainly.com/question/25566753
#SPJ1
which compounds are most likely to form a solution when mixed? group of answer choices hexane (c6h14) and water(h2o) hexane and ammonia (nh3) hexane (c6h14) and octane (c8h18) sodium chloride (nacl) and hexane (c6h14)
D) sodium chloride (NaCl) and hexane (c6h14) are most likely to form a solution when mixed.
Sodium chloride (NaCl) and hexane (C6H14) are two common substances that can form a solution when mixed. When these two substances are combined, the sodium chloride molecules interact with the hexane molecules and form a homogenous mixture.
This mixture allows for the two components to be evenly distributed throughout, creating a solution. The combination of sodium chloride and hexane is able to form a solution due to the polar nature of sodium chloride and the non-polar nature of hexane.
The polar nature of sodium chloride allows it to form strong hydrogen bonds with the non-polar hexane molecules, resulting in a homogenous mixture.
To learn more about sodium chloride, click here:
https://brainly.com/question/9811771
#SPJ4
A student left a sealed jar of water outside her home. Water can be a solid, liquid, or
gas. When she put it outside, the water was a solid. Twelve hours later, the water had
changed phase and was a liquid. What happened to the water molecules?
Is H+ + OH- --> H₂O a redox reaction? Explain detailed
H and O are in the +1 and -2 oxidation states in H2O H 2 O throughout the aforementioned reaction. In the reactant and product sides of the reaction, oxygen and hydrogen are therefore in the same oxidation state. So, the reaction that is being described is not a redox reaction.
Describe the details of redox reaction?An oxidation-reduction reaction, often known as a redox reaction, is a kind of chemical reaction in which two species exchange electrons. Any chemical reaction in which a molecule, atom, or ion experiences an increase or decrease in its oxidation number due to the gain or loss of an electron is referred to as an oxidation-reduction reaction.This reaction is a redox reaction because oxygen's oxidation status changes in the example.H and O are in the +1 and -2 oxidation states in H2O H 2 O throughout the aforementioned reaction. In the reactant and product sides of the reaction, oxygen and hydrogen are therefore in the same oxidation state. So, the reaction that is being described is not a redox reaction.To learn more about redox reaction refer to:
https://brainly.com/question/21851295
#SPJ1
what significance does the slight overlap of the van der waals surfaces have with respect to the structural relationships of the catalytic triad residues?
The slight overlap of the Van der Waals surfaces between the catalytic triad residues is important for the structural relationships of the residues, allowing for proper positioning and orientation. It also helps to stabilize the transition state of the enzyme-catalyzed reaction which is crucial for the catalytic activity of the enzyme
The slight overlap of the Van der Waals surfaces is also known as the Van der Waals interaction. It is important for the structural relationships of the catalytic triad residues in enzymes.
Enzymes are biological catalysts that speed up chemical reactions in cells. A common feature of enzymes is the presence of a catalytic triad, which is a group of three amino acid residues that are critical for the enzyme's catalytic activity. The catalytic triad residues are typically composed of a nucleophile, a base, and an acid/proton acceptor.
Learn more about Van der Waal's Interaction here: https://brainly.com/question/5541979
#SPJ4
According to Figure 2, the maximum positive value of
Vs was approximately:
A. 125 V.
B. 200 V.
C. 250 V.
D. 275 V.
According to Figure 2, the maximum positive value of Vs was approximately: 250 V.figure was attached below.Vs means valence.
The power supply voltage, Vs, and the circuit current, I, are monitored throughout a 20 msec time span in Figure 2. The dashed line denotes the voltage Vs. We must identify the peak or crest of the dashed curve in order to get the highest positive value of Vs. This highest point on the graph corresponds to either 0.25 amps or 250 volts.Maximum elemental valence. The data from the list of the elements' oxidation states is used to calculate the elements' maximum valences. Maximum positive acceleration occurs when the slope of the velocity-time curve is greatest, at t=3s, and is around (6m/s-2m/s)/(4s2s)=2m/s 2 (the slope of the graph). (c) When the slope of the velocity-time graph is zero, which happens at t=6s and also for t>10s, the acceleration a=0.
learn more about valence Refer :brainly.com/question/5365825
#SPJ4
What is so surprising about the properties of the elements sodium and chlorine when they chemically bond to form the compound sodium chloride?
Sodium (Na) and chlorine (Cl) are two highly reactive elements that, when chemically bonded, form the compound sodium chloride (NaCl), more commonly known as table salt.
What is surprising about the properties of these elements when they chemically bond to form this compound is that the resulting compound is a very stable and highly crystalline solid that is not reactive or explosive like the individual elements.
What are the elements about?Sodium, when exposed to air or moisture, reacts vigorously and can ignite or explode. Chlorine, being a halogen, is a highly reactive gas and can be toxic to living organisms. However, when they bond together, they form a stable compound that is safe to handle and consume.
Therefore, Another surprising property of this compound is that it is an ionic compound, meaning it is composed of ions with a positive charge (Na+) and negative charge (Cl-). This type of chemical bond is formed by the transfer of electrons from one atom to another, which makes it an ionic bond, different from covalent bond that is formed by the sharing of electrons.
Learn more about sodium from
https://brainly.com/question/24878544
#SPJ1
a kilocalorie, by definition, is a measure of a. fat in food. b. heat energy. c. nutrients in food. d. sugar and fat in food.
One kilogram of water requires one kilocalorie of heat energy to increase its temperature by one degree F.
Is 37 degrees Fahrenheit hot or cold?Your body temperature is usually around 37 °C. You frequently get a fever when your body is 37.8°C or higher. You can feel unsteady, sweaty, or chilly. You can tell whether you have a fever by taking your temperature using a thermometer.
Is Australia hotter than India?Is India hotter than Australia? India is anticipated to be hotter since it is closer to the equator than Australia. Most of India's interior regions see average temps between 90 and 104 °F. In contrast, Australia's summertime average temperature is 86 °F.
To know more about temperature visit:
https://brainly.com/question/13294753
#SPJ4
how many moles of vanillin are required to produce one mole of iodovanillin? (record one decimal place with no units or other modifiers.)
The moles of vanillin are required to produce one mole of iodovanillin is one mole of vanillin.
According to the question the reaction is expressed as :
C₈H₈O₃ + NaI + NaOCl ----> C₈H₇IO₃
The vanillin react with sodium iodide and the sodium hypochlorite froms the idovanillin.
The number of moles can be calculated by the formula given below :
The number of moles = mass / molar mass
It is clear from the above balanced equation that :
1 mole of the vanillin required to produce ethe 1 mole of the idovanillin
Thus, the number of moles of the vanillin is one mole to produce the 1 mole of the idovanillin.
To learn more about vanillin here
https://brainly.com/question/27095982
#SPJ4
If I started with 50grams of a radioactive isotope with a half-life of 25 years, how much of the sample would I have after 50 years?
Answer: 1
Explanation:
maria is comparing the properties samples of magnesium, calcium, aluminum, and potassium. which metal is more reactive?
In the case of magnesium, calcium, aluminum, and potassium, potassium is the most reactive metal.
In general, reactivity of a metal increases as you move down a group or a column in the periodic table. The reactivity of a metal is related to the ease with which it loses electrons to form a positive ion, or cation. In the case of magnesium, calcium, aluminum, and potassium, potassium is the most reactive metal. It is located in the first group or column of the periodic table, and has the smallest atomic radius and the most loosely held outermost electrons. This makes it easier for potassium to lose electrons and form a positive ion, making it the most reactive of the four metals mentioned. Aluminum is the next most reactive, followed by calcium and magnesium. Magnesium is the least reactive of the four metals mentioned.
To know more about magnesium please refer: https://brainly.com/question/1533548
#SPJ4
Use this information to calculate. 25 points
The Gibbs free energy of reaction is the difference in Gibbs energy of formation of the products and that of the reactants. The ΔGrxn for the given reaction is -2453 kJ.
What is Gibbs free energy ?The Gibbs free- energy is the available energy form for a system. The Gibbs free energy change of a reaction is given as follows:
ΔGrxn = ∑ΔGf (products) - ∑ΔGf (reactants)
The Gibbs energy of formation of all the reactants and products are given in the data. Hence, multiply each value with corresponding number of moles and the Gibbs energy of the reaction is given as:
ΔGrxn = (4 ×-394.4 kJ/mol) + (2×-288.57 kj/mol) - (2 × 209.2 kJ/mol)
= - 2453 kJ.
Therefore, the ΔGrxn of the given reaction is -2453 kJ.
Find more on Gibbs energy change:
https://brainly.com/question/15213613
#SPJ1
the structural diversity of carbon-based molecules is determined by which properties? select all that apply.
Structural diversity of carbon-based molecules is determined by following properties:1. ability of those bonds to rotate freely,2. ability of carbon atom to form four covalent bonds,3. orientation of those bonds in the form of tetrahedron.
What is a covalent bond?Covalent bond is defined as a type of bond which is formed by the mutual sharing of electrons to form electron pairs between the two atoms.These electron pairs are called as bonding pairs or shared pair of electrons.
Due to the sharing of valence electrons , the atoms are able to achieve a stable electronic configuration . Covalent bonding involves many types of interactions like σ bonding,π bonding ,metal-to-metal bonding ,etc.
Learn more about covalent bond,here:
https://brainly.com/question/19382448
#SPJ1
Analyze the following proton nmr spectrum for a compound with the chemical structure c10h12o2. Draw the structure of the compound
Guaiacol, a pale yellow oily liquid that is the allylic replacement for eugenol(C10H12O2 ), is a liquid. Its aroma is pleasant, spicy, and reminiscent of cloves. It is one of the most significant substances found in cloves.
The compound eugenol (4-allyl-2-methoxyphenol) has anti-inflammatory, antiseptic, and antibacterial effects. One of the reduced phenylpropanoids and a key ingredient in clove oil is eugenol.C10H12O2 -> 5 unsaturation sites. For a molecule of this size (i.e., only 10 carbons), the presence of a phenyl ring is often responsible for the high number of unsaturation sites (which provides 4sites on its own). Look for signals in the 7-8 ppm (aromatic proton) range in the 1H nmr spectrum for an immediate demonstration..
learn more about eugenol Refer:brainly.com/question/29389817
#SPJ4
an arctic weather balloon is filled with 24.6l of helium gas inside a prep shed. the temperature inside the shed is 7 degrees celsius. the balloon is then taken outside, where the temperature is 7 degrees celsius. calculate the new volume of the balloon. you may assume the pressure on the balloon stays constant at exactly 1 atm. round your answer to 3 significant digits.
The balloon's new volume is 24.6L. An arctic weather balloon being inflated using 24.6 litres of helium gas in a prep shed. The shed is seven degrees Celsius inside.
When the balloon is hauled outside, it is seven degrees Celsius outside. Any three-dimensional solid's volume is equal to how much room it occupies. One of these solids can be a cube, a cuboid, a cone, a cylinder, or a sphere. Chemical compounds are composed of a large number of comparable molecules (or molecular entities), which are composed of atoms from various elements bonded together by chemical bonds. Because of this, a molecule composed of atoms from a single element is not a compound.
v1/t1 = v2/t2
24.6/7 = v2/7
v2 = 24.6L
v1 = v2
Learn more about helium gas here
https://brainly.com/question/26408362
#SPJ4
the radius of a strontium atom is 215 pm. how many strontium atoms would have to be laid side by side to span a distance of 3.46 mm
The radius of the strontium atom is 215 pm. The strontium atoms would have to be distance of 3.46 mm is 8.0 × 10⁶ atoms.
The information is given as :
The radius, r = 215 pm = 2.15 × 10⁻¹⁰ m
The distance, d = 3.46 mm = 3.46 ×10⁻³ m
The No. of strontium atoms that laid side by side is :
n = d / 2 r
n = 3.46 ×10⁻³ m / (2 × 2.15 × 10⁻¹⁰)
n = 3.46 ×10⁻³ / 4.3 × 10⁻¹⁰ atoms
n = 8.0 × 10⁶ atoms
The number of strontium atoms is 8.0 × 10⁶ atoms.
To learn more about atoms here
https://brainly.com/question/11966999
#SPJ4
a solution is prepared at that is initially in dimethylamine , a weak base with , and in dimethylammonium bromide . calculate the ph of the solution. round your answer to decimal places.
At this location, a solution is made up of dimethylamine, a weak base, and dimethylammonium bromide. The solution's pH value is 10.96.
Describe base.a material that can neutralize acids and receive hydrogen ions from water. Bases can color certain colours blue and feel sloppy or soapy upon that skin. Sodium hydroxide is a good illustration of a base.
Which base has the most strength?Because it totally dissociates into sodium ions as well as hydroxide ions, hydrogen peroxide is the strongest base. Further away from the acid, these strong acids are treated with hydronium ions, totally ionizing the hydrogen ions.
pOH = pKb + log [acid]/[base]
pOH = -log 1.3 × 10⁻³ + log 0.20 M/0.14 M
pOH = 3.04
pH of the solution,
pH + pOH = 14
pH = 14 - pOH
= 14 -3.04
= 10.96
To know more about base visit:
https://brainly.com/question/27089588
#SPJ4
a reaction occurs when nitric acid (hno3) is mixed with an aqueous solution of potassium hydrogen carbonate. aqueous potassium nitrate is produced. write the chemical and net ionic equations for the reaction.
The net ionic equation for the reaction is:
H+(aq) + CO3^2-(aq) → NO3^-(aq) + H2O(l) + CO2(g)
What is the property of the given reaction?The given reaction is acid-base neutralization, where HNO3 (nitric acid) acts as the acid, and KHCO3 (potassium hydrogen carbonate) acts as the base. The H+ ion from HNO3 reacts with the CO3^2- ion from KHCO3 to form H2O (water) and CO2 (carbon dioxide) as products. The remaining ions combine to form KNO3 (potassium nitrate) as the main product.
What is KHCO3?KHCO3 is Potassium bicarbonate. It is a white, crystalline, slightly alkaline and salty substance. It is created by the passage of carbon dioxide through an aqueous potassium carbonate solution. It is used in medicine as an antacid.
To know more about carbon dioxide, visit here:
https://brainly.com/question/15063989
#SPJ4
Simplify the following expression:
The simplification of the expression will return 3. Option 1.
Simplification of an algebraic expressionThe expression to be simplified is as follows:
3 mol/1 x 1/1 mol
This is the same as: 3 mol x 1/1 x 1 mol
Carrying out the mathematical expressions of the numerator and denominator, we will have:
3 mol/1 mol
Carrying out the division, the 'mol' will cancel out while 3/1 will give us 3.
In other words, 3 mol/1 x 1/1 mol will return a value of 3.
More on algebraic expressions can be found here: https://brainly.com/question/953809
#SPJ1
Solid aluminum has a specific heat capacity of 0.90 J/g K How many joules of heat are absorbed to raise the temperature of 24.0 grams of aluminum from 300. K to 350. K?
The amount of heat absorbed to raise the temperature of 24.0 grams of aluminum from 300K to 350K is 1080J.
How to calculate heat?The amount of heat absorbed or released by a substance can be calculated as follows:
Q = mc∆T
Where;
Q = quantity of heat absorbed or releasedm = mass of substancec = specific heat capacity∆T = change in temperatureAccording to this question, a solid aluminum has a specific heat capacity of 0.90J/g K. The amount of heat absorbed or released by the substance is calculated as follows:
Q = 24.0 × 0.90 × {350 - 300}
Q = 24.0 × 0.90 × 50
Q = 1,080 Joules
Therefore, 1080J is the amount of heat absorbed by the aluminium sample.
Learn more about heat at: https://brainly.com/question/9588553
#SPJ1