Why does the brightness of a bulb not change noticeably when you use longer copper wires to connect it to the battery?

a. All the current is used up in the bulb, so the connecting wires don't matter.
b. Very little energy is dissipated in the thick connecting wires.
c. Electric field in the connecting wires is zero, so emf = E_bulb * L_bulb.
d. Current in the connecting wires is smaller than current in the bulb.
e. The electric field in connecting wires is very small, so emf almost = E_ bulb * L_bulb.

Answers

Answer 1

Answer:

Options B & E are correct

Explanation:

Looking at all the options, B & E are the correct ones.

Option B is correct because the thicker the wire per unit length, the lesser resistance it will posses and the lesser the energy that will be dissipated by the wire and in return more energy will be dissipated by the bulb.

Option E is also correct because the resistance of the copper wires is low enough to ensure that there's not much drop in voltage across the copper wires. Thus, there will not be any noticeable differences in the voltage across the bulb.

Option A is not correct because the current is not used up and thus the charge is conserved, and it will circulate just through the circuit.

Option C is not correct because although the Electric field along the wire is not zero, it is very small.

Option D is not correct because the wires and the light bulb are connected in series and as such, the current in both the wires and the light bulb will be identical.

Answer 2

The brightness of a bulb that not change noticeably when you use longer copper wires to connect it to the battery is :

b. Very little energy is dissipated in the thick connecting wires.

e. The electric field in connecting wires is very small, so emf almost = E_ bulb * L_bulb.

"Energy"

The brightness of a bulb that not change noticeably when you use longer copper wires to connect it to the battery is very little energy is dissipated in the thick connecting wires and the electric field in connecting wires is very small, so emf almost = E_ bulb * L_bulb.

The thicker the wire per unit length, the lesser resistance it'll posses and the lesser the vitality that will be scattered by the wire and in return more vitality will be disseminated by the bulb.

The resistance of the copper wires is low sufficient to guarantee that there's not much drop in voltage over the copper wires. Hence, there will not be any noticeable contrasts within the voltage over the bulb.

Thus, the correct answer is B and E.

Learn more about "Circuit":

https://brainly.com/question/15767094?referrer=searchResults


Related Questions

See Conceptual Example 6 to review the concepts involved in this problem. A 12.0-kg monkey is hanging by one arm from a branch and swinging on a vertical circle. As an approximation, assume a radial distance of 86.4 cm is between the branch and the point where the monkey's mass is located. As the monkey swings through the lowest point on the circle, it has a speed of 1.33 m/s. Find (a) the magnitude of the centripetal force acting on the monkey and (b) the magnitude of the tension in the monkey's arm.

Answers

Answer:

(a)  24.56 N

(b) 142.28 N

Explanation:

(a)

The designation assigned to something like the net force pointed toward the middle including its circular route seems to be the centripetal force. The net stress only at lowest point constitutes of the strain throughout the arm projecting upward towards the middle as well as the weight pointed downwards either backwards from the center.

The centripetal function is generated from either scenario by Equation:

⇒  [tex]Fc = \frac{mv^2}{r}[/tex]

On putting the values, we get

⇒       [tex]=\frac{12\times 1.33^2}{0.864}[/tex]

⇒       [tex]=24.56 \ N[/tex]

(b)

Use T to denote whatever arm stress we can get at the bottom including its circle:

⇒  [tex]Fc = T - mg =\frac{ mv^2}{r}[/tex]

⇒  [tex]T = mg + Fc[/tex]

⇒      [tex]=12\times 9.81+24.56[/tex]

⇒      [tex]=142.28 \ N[/tex]

A 126 N force is applied at an angle of 25.00 to a 8.50 kg block pressed against a rough vertical wall and the block slides down the wall at constant velocity. Calculate the coefficient of kinetic friction between the block and the wall.

Answers

Answer:

μk = 0.58

Explanation:

If the block is sliding down at constant speed, this means that no net force is acting upon it in the vertical direction.As the block is pressed on the wall, this means that it doesnt accelerate in the horizontal direction either, so no net force acts upon it  in this direction also.In this direction, we have only two forces acting, equal and opposite each other, one is the normal force (exerted by the wall) and the other is the horizontal component of the applied force.If the applied force forms an angle of 25º with the wall (which is vertical), this means that we can get its projection along the horizontal direction, using simple trigonometry , as follows:

       [tex]F_{apph} = F_{app} * sin\theta = 126 N * sin 25 = 53.3 N[/tex]

       ⇒  [tex]F_{n} = - F_{apph} = -53.3 N[/tex]

In the vertical direction, we have three forces acting on the block: the weight pointing downward, the kinetic friction force (as we know that the block is sliding), and the vertical component of the applied force, in the same direction as the friction one.As we have already said, the sum of these forces must be 0.[tex]F_{g} + F_{appv} + F_{ff} = 0 (1)[/tex] where Fg is the weight of the block, Fappv is the vertical component of  the applied force, and Fff is the kinetic friction force.Replacing these forces by their mathematical expressions, we have:

       [tex]F_{g} = m_{b} * g = 8.5 Kg * (-9.8 m/s2) = -83.3 N[/tex]

       [tex]F_{appv} = F_{app}* cos\theta = 126 N * cos 25 = 114.2 N[/tex]

      [tex]F_{ff} = \mu_{k}* F_{n} =\mu_{k} * (-53.3 N)[/tex]

Replacing  in (1), and solving for μk, we finally get:

        μk = 0.58

Alejandro made 6.4 liters of punch using half apple juice and half orange juice. How many milliliters of apple juice are in the punch?

Answers

Answer:

3.2

Explanation:

I hope that this helps! Have a good day!!

How much work is required to move it at constant speed 5.0 m along the floor against a friction force of 290 N?

Answers

Answer:

The answer is 1450 J

Explanation:

The work done by an object can be found by using the formula

workdone = force × distance

From the question

force = 290 N

distance = 5 m

We have

workdone = 290 × 5

We have the final answer as

1450 J

Hope this helps you

The drawing shows two identical airplanes at an air show. The airplanes are flying at the same speed. Airplane W is flying 50 m higher than airplane X. Which statement best describes the energy of the two airplanes?

Answers

Answer:

Airplane X has more gravitational potential energy than Airplane W

Explanation:

Gravitational potential energy is defined as "the energy acquired by an object due to its positional change in presence of gravitational force."

That being said, gravitational potential energy depends on the height of an object above the ground. It also depends on the mass of the object and even further, the amount of gravitational force that is applied.

And if we take a look at the question again, we'd agree that the two airplanes are flying at different heights, this means their gravitational potential energy will be different. And as such, Airplane X has more gravitational potential energy than Airplane W

Wind eroding the rocks on a moutain is an example of the atmosphere interacting with the cryosphere
true or false

Answers

Answer:

False

Explanation:

The cryosphere is all the part of the earth where water is in solid form. Where wind interacts with rocks, it is an example of atmosphere - geosphere interaction.

Rocks are part of the geosphere The geosphere is the part of the earth made up of solid rocks. Wind erosion occurs when wind wears down part of the geosphere.

Plz help me fast WITH EXTRA POINTS AFTER SUBMITTING

Answers

Answer:

4 bobux

Explanation:

one bobux

two bobux

three bobux

four bobux

Hollywood and video games often depict the bad guys being "blown away" when they’re shot by a bullet (i.e. once hit, their feet leave the ground and they fly backwards). Assuming that even if a handgun cartridge did generate enough momentum for the bullet to do this, why is it still nonsense on-screen?

Answers

Answer:

Taking a look at Newton's third law of motion which states "for every force exerted, their is an opposite force equal in magnitude and opposite in direction on the first force".

Similarly if a bullet had enough forces behind it to hurl someone through the air when they were hit, a similar force would act on the person holding the gun that fired the bullet.  

What we load into the gun is called a 'cartridge' Each piece is composed of four basic substance the casing, the bullet, the primer, and the powder.  

The primer explodes lighting the powder which causes a buildup of pressure behind the bullet. This powder can be used in rifle cartages because the bullet chamber is designed to withstand greater pressures.  

It is difficult in practice to measure the forces within a gun bagel, but the one easily measured parameter is the velocity with which the bullet exits muzzle velocity, therefore assuming that even if a handgun cartridge which generate enough momentum for the bullet to do this,  it is still nonsense on screen in Hollywood and video.  

             

my heart strike him to dead.what figure of speech is that?​

Answers

Answer:

Hyperbole

Explanation:

this is an extreme exaggeration or overstatement/ magnification

Forces are expressed in ________. (newtons or mass)

Answers

Newtons

Mass isn’t even a unit of measurement

Which of the following is not true about taxes? A. Mandatory sum of money by government so that it can operate B. Due on April 15th C. largely collected to support private businesses D. Collected by the Internal Revenue Service (IRS)

Answers

Answer would have to be A

How have the owners of the game reserve invested in the local community?

Answers

Answer:They have made community members shareholders so they get a share of the profits, which they use for schools and healthcare clinics

Explanation: Edmentum

Answer:

shareholders of the community get profits and that is used for schools and healthcare clinics. cs. 

Explanation:

How do compounds differ from mixtures such as lemonade

Answers

Answer:

A mixture is a combination of two or more substances in any proportion. This is different from a compound, which consists of substances in fixed proportions. ... The lemonade pictured above is a mixture because it doesn't have fixed proportions of ingredients.

Explanation:

Sally is on a large sailboat that comes to a stop a small distance from the dock. Since it is such a small distance, Sally decides to jump to the dock. She makes the jump, but the large sailboat moves away from her as she jumps. Since Sally is interested to see what happens on other boats, she makes the same jump from a rowboat that is much smaller than the large sailboat. Which boat will move away from Sally more slowly

Answers

Answer:

The rowboat will move away from sally more quickly because the rowboat because the sailboat is larger in mass

Explanation:

Gnerally the row boat will move away from her quicker than the sailboat this is because the mass of the sail boat is larger than the row boat , hence the frictional force that opposes motion will be greater in the sailboat than in the row boat.

A single living thing.​

Answers

Answer:

What do you mean ma´am/sir?

Explanation:

what is the meaning of relative as a noun?

Answers

Answer:

noun. a person who is connected with another or others by blood or marriage. something having, or standing in, some relation or connection to something else. something dependent upon external conditions for its specific nature, size, etc. (opposed to absolute).

A stone is released from rest from the edge of a building roof 190 m above the ground. Neglecting air resistance, the speed of the stone, just before striking the ground, is:___________.

Answers

Answer:

61 m/s

Explanation:

If the stone is realeased from rest, this means that its initial velocity is 0.As tha stone is only influenced by gravity, and the acceleration due to it is constant (near the surface of the Earth), we can apply the following kinematic equation:

        [tex]v_{f}^{2} - v_{o}^ {2} = 2* g* h (1)[/tex]

Replacing by the values of g=9.8 m/s², and h=190 m, rearranging and solving for vf, we get:vf = √2*g*h =√2*9.8 m/s²*190 m = 61 m/s (assuming that the downward direction is the positive one).

***ECONOMICS***

A government that wants to increase its GDP would most likely take which
action?
A. Increase the money supply to make it easier to borrow money
Ο Ο
B. Decrease the money supply to slow the growth of inflation
C. Increase taxes on businesses that operate outside the country
O O
D. Decrease taxes on citizens who are poor or unemployed

Answers

Answer:

The correct answer is A. A government that wants to increase its GDP would most likely increase the money supply to make it easier to borrow money.

Explanation:

If the government wanted to increase its GDP, the most appropriate way to do so would be to increase the money supply both through issuance and through a reduction in bank reserve requirements, thereby increasing the circulating money in the hands of society.

This, in turn, would make citizens reinvest that money, increasing economic production and, therefore, the national GDP.

Answer: A. Increase the money supply to make it easier to borrow money

Explanation: I just took the test on Ap ex

Velocity which stone gains when falling from height of 80 m is approximately equal to *

A. 0
B. 1 m/s
C. 8 m/s
D. 40 m/s
E. 300 m/s

Answers

Answer:

40

Explanation:

A 66-N ⋅ m torque acts on a wheel with a moment of inertia 175 kg ⋅ m2. If the wheel starts from rest, how long will it take the wheel to make one revolution?

Answers

Answer:

t = 5.77 s

Explanation:

This exercise will use Newton's second law for rotational motion

            τ = I α

             α = τ / I

             α = 66/175

             α = 0.3771   rad/s²

now we can use the rotational kinematics relations, remember that all angles must be in radians

 

            θ = 1 rev = 2π radians

               

            θ = w₀ t + ½ α t²

as the wheel starts from rest w₀ = 0

             t = √ (2θ/α)

let's calculate

             t = √ (2 2π / 0.3771)

             t = 5.77 s

as a result, the net electric force experienced by each negatively charged particle is reduced to F/2. The value of q is

Answers

Answer:

The value of q is [tex]\dfrac{Q}{8}[/tex]

Explanation:

Given that,

Each charge = -Q

Distance between charges = L

Reduced force = [tex]\dfrac{F}{2}[/tex]

Suppose, Two particles each with a charge -Q are fixed a distance L apart as shown above. Each particle experiences a net electric force F. A particle with a charge +q is now fixed midway between the original two particles.

We know that,

The force on each end is

[tex]F=\dfrac{kQ^2}{L^2}[/tex]...(I)

If the charge q is placed at mid point then

The  force on each end charge is

[tex]\dfrac{F}{2}=F+F'[/tex]....(II)

We need to calculate the value of q

Using equation (II)

[tex]\dfrac{F}{2}=F+F'[/tex]

Put the value of F into the formula

[tex]\dfrac{\dfrac{kQ^2}{L^2}}{2}=k\dfrac{Q^2}{L^2}+k\dfrac{q\times(-Q)}{(\dfrac{L}{2})^2}[/tex]

[tex]\dfrac{kq(-Q)}{(\dfrac{L}{2})^2}=-\dfrac{kQ^2}{2L^2}[/tex]

[tex]\dfrac{q}{\dfrac{1}{4}}=\dfrac{Q}{2}[/tex]

[tex]q=\dfrac{Q}{8}[/tex]

Hence, The value of q is [tex]\dfrac{Q}{8}[/tex]

Find the work done by a 75.0 kg person in climbing a 2.50 m flight of stairs at a constant speed.

Answers

Answer:

1,839.375 Joules

Explanation:

Work is said to be done is the force applied to an object cause the object to move through a distance.

Workdone = Force * Distance

Workdone = mass * acceleration due to gravity * distance

Given

Mass = 75.0kg

acceleration due to gravity = 9.81m/s²

distance = 2.50m

Substitute the given parameters into the formula:

Workdone = 75.0*9.81*2.50

Workdone = 1,839.375Joules

Hence the workdone is 1,839.375 Joules

Time it takes stone to fall from the height of 80 m is approximately equal to *

A. 1 s
B. 2 s
C. 4 s
D. 8 s

Answers

Answer:

D

Explanation:

Answer:

c.4s

Explanation:

During a testing process, a worker in a factory mounts a bicycle wheel on a stationary stand and applies a tangential resistive force of 115 N to the tire's rim. The mass of the wheel is 1.80 kg and, for the purpose of this problem, assume that all of this mass is concentrated on the outside radius of the wheel. The diameter of the wheel is 50.0 cm. A chain passes over a sprocket that has a diameter of 8.50 cm. In order for the wheel to have an angular acceleration of 4.30 rad/s2, what force, in Newtons, must be applied to the chain

Answers

Answer:

The force is     [tex] F_c  =  789.03 \  N [/tex]    

Explanation:

From the question we are told that

   The tangential  resistive force is [tex]F_t  =   115 \ N[/tex]

   The mass of the wheel is  m  = 1.80 kg

  The diameter of the wheel is  [tex]d =  50.0 cm  = 0.5 \ m[/tex]

   The diameter of the sprocket is  [tex]d_c  =  8.50 \ cm =0.085 \ m[/tex]

  The angular acceleration considered is  [tex]\alpha  =  4.30\ rad/s^2[/tex]

Generally the radius of the wheel is

       [tex]r = \frac{d}{2}[/tex]

=>     [tex]r = \frac{0.5}{2}[/tex]

=>     [tex]r = 0.25 \ m [/tex]

Generally the radius of the sprocket is

       [tex]r_c = \frac{d_c}{2}[/tex]

=>     [tex]r_c = \frac{0.085}{2}[/tex]

=>     [tex]r_c = 0.0425 \ m [/tex]

Generally the moment of inertia of the wheel is mathematically represented as

      [tex]I  =  m  *  r^2[/tex]

=>    [tex]I  =  1.80  *  0.25^2[/tex]

=>    [tex]I  = 1.1125 \ kg \cdot m^2[/tex]

Generally the torque experienced by the wheel due to the forces acting on it  is mathematically represented as

      [tex]\tau =  F_c *  r_c  -  F_t  * r  [/tex]

Here  [tex]F_c[/tex] is the force acting on the sprocket

So  

      [tex]\tau =  F_c *  0.0425 - 115  * 0.25  [/tex]

       [tex]\tau = 0.0425F_c  -  28.75  [/tex]

Generally the torques that will cause the wheel to move with [tex]\alpha  =  4.30\ rad/s^2[/tex] is mathematically represented as

       [tex]\tau  =  I  * \alpha[/tex]

So

        [tex] 0.0425F_c  -  28.75  =   I  * \alpha  [/tex]

        [tex] 0.0425F_c  -  28.75  =   1.1125  *4.30 [/tex]    

       [tex] 0.0425F_c  -  28.75  =   1.1125  *4.30 [/tex]    

        [tex] F_c  =  789.03 \  N [/tex]    

The name for this type of energy is
A.potential energy
B.motion
C.position
D.kinetic energy​

Answers

Explanation:

[tex]kinetic \: energy \: is \: the \: energy \: of \: a \: body \: in \: motion. \\ that \: is \: energy \: of \: a \: body \: that \: is \: moving.\\ while \\ potential \: energy \: is \: the \: energy \: of \: a \: body \: by \: the \: virtue \: of \: its \: position \: \\ that \: is \: energy \: of \: a \: body \: that \: is \: not \: moving.[/tex]

♨Rage♨

Is it true or false that the displacement always equals the product of the average velocity and the time interval?

Answers

Answer:

True.

Explanation:

Applying the definition of average velocity, we know that we can always write the following expression:

        [tex]v_{avg} = \frac{\Delta x}{\Delta t}[/tex] (1)

By definition, Δx is just the displacement, and Δt is the time interval.So, just rearranging terms in (1), we get:

        [tex]\Delta x} = v_{avg}* {\Delta t}[/tex]

A student studies the effect of an object's speed on its amount of kinetic energy. This graph summarizes the data from the study Kinetic energy Speed Which statement best describes what the graph shows?
A. As speed increases, kinetic energy increases exponentially
B. As speed increases, kinetic energy stays the same
C. As speed decreases, kinetic energy doubles each time.
D. As kinetic energy increases, speed decreases exponentially​

Answers

The answer is A I Hope this answer helps you (i got the question right)

Answer:

A. As speed increases, kinetic energy increases exponentially.

Explanation:

The amount of kinetic energy an object has depends on the speed. Kinetic energy is also known as "motion energy." This being said, if speed is increasing, decreasing, or staying constant, the kinetic energy of the object will too.

In the figure below, a block of 1.67 slides on a track with different levels, which has friction only at the highest point where the kinetic coefficient of friction is uk = 0.35. If the block has an initial speed V0 = 7.5m/s and the highest point of the track is at ℎ = 2.1 above the initial position of the block, calculate the distance where the friction force for the block is.

Answers

Answer:

2.0 m

Explanation:

Energy is conserved.

Initial KE = Final PE + Work done by friction

½ mv² = mgh + Fd

½ mv² = mgh + mgμd

½ v² = gh + gμd

½ v² − gh = gμd

d = (½ v² − gh) / (gμ)

d = (½ (7.5 m/s)² − (10 m/s²) (2.1 m)) / ((10 m/s²) (0.35))

d = 2.0 m

Determine the acceleration that results when a 12 N net force is applied to a 3 kg object.
a. 4 m/s​ 2
b. 6 m/s​ 2
c. 12 m/s​ 2
d. 36 m/s​ 2

Answers

Answer:

4m/s^2 ( A)

Explanation:

The solution is in the attached file

6) The magnitude of the force the Sun exerts on Uranus is 1.41 x 1021 newtons. Explain how it is possible for the Sun to exert agreater force on Uranus than Neptune exerts on Uranus.

Answers

Answer and Explanation:

TL: DR The Sun is much more massive than Neptune — more than enough to make up for the somewhat smaller distance between the two planets at the closest approach.

[The surprise in this answer (to me, a non-astronomer), is that the gap between the orbits of Neptune and Uranus is large — half the distance from Uranus to the Sun.]

The ratio of gravitational attraction of the Sun on Uranus versus Neptune on Uranus is directly proportional to the ratio of the Sun’s mass to Neptune’s and inversely proportional to the ratio of the square of the distances (let’s use the closest approach of the two planets to one another to calculate a maximum attraction).

Numbers:

Sun’s mass: 2 x 10^30 kg

Neptune’s mass: 1 x 10^26 kg

Distance of Sun to Uranus: 3 x 10^9 km

Closest approach of Uranus and Neptune: 1.5 x 10^9 km

Without doing any arithmetic, we see that even at their closest approach, Uranus and Neptune are separated by about one-half of the Uranus to Sun distance. Squaring that ratio, we see that if the Sun and Neptune had the same mass, the attraction between the Sun and Uranus would only be about 1/4 of that between the Sun and Neptune; however, the Sun has 20000 times the mass of Neptune, so the attraction between Uranus and the Sun is about 5000 times stronger than the maximum attraction between Uranus and Neptune.

The explanation of the possibility of why sun exerts a greater force on Uranus than Neptune exerts on Uranus is; because the force was calculated to be greater.

The formula for calculating the Force of Gravity between two masses is:

F = G*m₁*m₂/r²

Where;

F = force of gravity

G = gravitational constant = 6.674 × 10⁻¹¹ N•m²/kg²

m₁ = mass of the larger object

m₂ = mass of the smaller object

r = the distance between the centers of the two masses

Now, from online values, we have the following;

mass of Neptune; m₁ =  102.413 × 10²⁴ kg

mass of Uranus; m₂ = 86.813 × 10²⁴ kg

average distance between the centers of Neptune and Uranus; r = 1.62745 × 10¹² m

Thus, force exerted by Neptune on Uranus is;

F = (6.674 × 10⁻¹¹ × 102.413 × 10²⁴ × 86.813 × 10²⁴)/(1.62745 × 10¹²)²

F = 2.240 × 10¹⁷ N

We are told that the force the Sun exerts on Uranus is 1.41 the force the Sun exerts on Uranus is 1.41 × 10²¹ N.

That is greater than the force Neptune exerts on Uranus.

Read more about Force of Gravity at; https://brainly.com/question/7281908

Other Questions
Point Mis the midpoint of segment AC. Point M is located at (25.5, 60.1), and point Cislocated at (18.3, 72.5).ABM (25.5, 60.1)DC (18.3, 72.5)Find the location of point A. Round to the nearest tenth."write your answer as a coordinate with parenthesis and a comma separating the x and y.value what is y if x is 12 for this slope intercept form equation y=-1/3x-2 Which of the following is an arithmetic sequence?-2, 4, -6, 8, ...2, 4, 8, 16, ...-8, -6, -4, -2, ... a car is moving eastward and speeding up. the momentum of the car is A car wash detailed 132 cars in 4 hours. How many cars did they detail per hour? What is the length of the hypotenuse of the triangle? what are all the three legal declaration to be made by a candidate Given the diagram and information below, find mTUV. How was the Protestant reformation related to the renaissance? please help me solve this equation i need step by step explaining 3x + 2= x+4(x+2) In art when your drawing, what does tint mean? Define tint three types of threat in the nursing facility and a appropriate example for eeach Can you help, Solve for x. -2 + 3x = 2 + 6 + X SOMEONE PLEASE HELP QUICK Estimate 8,633 x 57,008 Which development would most likely cause the supply of a product toincrease?A. Government regulations increase the cost of making the productB. Fewer workers receive the education needed to create theproduct.OC. Companies expect the selling price of the product to risesignificantlyD. Reliance on old technology leads to higher production costs forthe product Joann wants to save the building block she created for the title of her company.In which file does she save this building block?O Building Blocks.dotxO Building Blocks.htmlO Building Blocks. thmxO Building Blocks.qpbb A company forecasts growth of 6 percent for the next five years and 3 percent thereafter. Given last year's free cash flow was $100, what is its horizon value (PV looking forward from year 4) if the company cost of capital is 8 percent?a. $0b. $1,672c. $2,000d. $2,676 what is 35% as a fraction WILL CASHAPPI will cash app the first person $10 that completes these questions correctly