An advantage of whitelists it can reduce false positives and disadvantage of whitelists is time-consuming. An advantage of blacklists is it allows free and open access to any email, and the disadvantage of blacklisting is it's not foolproof.
What are blacklisting and whitelisting?Blacklisting has the benefit of allowing unrestricted access to any email, website, IP address, or piece of software as long as there is no security concern.
The main benefit of employing application whitelisting is that it offers a defense against malware attacks, including ransomware.
Therefore, Whitelists have the potential to reduce false positives, but they take time to maintain. Blacklists have the benefit of allowing free and unrestricted access to any email, but they also have the drawback of not being completely reliable.
To learn more about whitelisting, refer to the link:
https://brainly.com/question/14617183
#SPJ1
When was cyber law of Nepal released for the first time?
Answer:
The Cyber Crime Control and Cyber Security Act, 2074 was released in Nepal on September 17, 2017. It was the first legislation regarding cybercrime in Nepal. This law was enacted to control the crimes committed using electronic devices and the internet, and to ensure the security of electronic devices and the cyber environment in Nepal.
Answer:
The government of Nepal passed 'The Electronic Transaction and Digital Signature Act-Ordinance' also known as the 'Cyber Law' on 15 September, 2004 (30th Bhadra 2061 BS).
a cisco catalyst switch needs to send frames over a layer etherchannel. which answer best descrives how the sw
On Cisco Catalyst switches, load balancing or ether channel load distribution employs an algorithm. Messages with the same value in certain fields in different headers transit over the same connection in a certain Ether Channel when the algorithm evaluates those fields.
Why is using Ether Channel in your Cisco switch advantageous?
Ether Channel is particularly scalable because it makes use of existing wiring. As the network's traffic requirements grow, it can be employed at any and all levels of a network to establish links with greater capacity. Every Cisco switch is capable of supporting Ether Channel. Be aware that it does not divide the frames in smaller pieces, employ a round-robin method that disregards the header values, or look at link utilization while making a decision.
Which of the following best represents an attribute of Ether Channel?
It is created by joining several physical links between two switches such that they appear to be one link.
To know more about ether channel visit:
brainly.com/question/14336929
#SPJ4
you have a system with more than one linux operating system installed. during the system's bootup process, which component loads a splash screen, allowing you to choose which operating system you want to run?
The component that loads a splash screen during the system's bootup process is called the boot loader.
What is system's bootup?System bootup, also known as booting, is the process of loading the operating system and any necessary programs and drivers into a computer's main memory. This process is typically initiated by pressing a power button or other external power switch.
The boot loader is a program that is responsible for loading the operating system kernel into memory and then executing it. The boot loader is usually the first program that runs when the computer is turned on. It provides a menu of choices, allowing the user to choose which operating system to run. This menu is usually presented in the form of a splash screen.
To learn more about system's bootup
https://brainly.com/question/13013910
#SPJ4
which one is the specific protocol for sharing computable programs across the network in service-oriented computing (soa)?
"A and C" is the specific protocol for sharing computable programs across the network in service-oriented computing (soa).
A protocol is a set of instructions for exchanging data. Each step and process of communication between two or more computers has a set of rules that apply to it. For networks to transport data successfully, they must abide by certain guidelines. Like programming languages, protocols are built on certain computer rules and regulations and are created for efficiency. Each rule has a different definition and a name that is specific to it. Protocols lay out the rules for communication and give specifics on the steps taken during data transmission. Multiple protocols may operate concurrently on a single process. A protocol family is formed as a result of this protocol coordination.
Which one is the specific protocol for sharing computable programs across the network in Service-Oriented Computing (SOA)?
SOAP
HTTP
REST
a and c
Here you can learn more about protocol in the link brainly.com/question/27581708
#SPJ4
what does a multiple-mode fiber optic cable do? uses multiple rays of light running at different angles to transmit data uses multiple rays of light running at different angles to transmit data uses radio signals to transmit data uses radio signals to transmit data uses a single ray of light to transmit data uses a single ray of light to transmit data uses sound waves to transmit data
A multiple-mode fiber optic cable uses multiple rays of light running at different angles to transmit data.
what is multiple-mode fiber optic?
Multi-mode fiber is a type of optical fiber designed to carry multiple light rays or modes simultaneously, each at a marginally different reflection angle inside the optical fiber core.
Multi-mode fiber is mainly used to transmit across comparatively shorter distances, as the modes are more likely to disperse over longer extents. This phenomenon is known as modal dispersion. Another common type of optical fiber is the single-mode fiber which is used mainly for longer distances.
Single mode fiber is designed to propagate a single light mode whereas multimode supports multiple simultaneous light modes. This difference impacts bandwidth, signal transmission distance and signal stability which we'll explore later.
learn more about multiple - mode fibre optic at
https://brainly.in/question/32665850
#SPJ4
To transmit data, a multiple-mode fiber optic cable makes use of multiple rays of light that run at different angles.
Option A is correct.
What exactly is multimode fiber optic?A type of optical fiber called multimode fiber is made to carry multiple light rays or modes at slightly different reflection angles inside the core of the fiber. Because the modes are more likely to disperse over longer distances, multi-mode fiber is typically utilized for transmitting over relatively shorter distances. Modal dispersion is the name given to this phenomenon. The single-mode fiber, which is primarily utilized over longer distances, is an additional common type of optical fiber.
Multimode fiber :Multimode fiber supports multiple simultaneous light modes, whereas single mode fiber is designed to propagate a single light mode. We'll look later at how this difference affects signal stability, signal transmission distance, and bandwidth.
Incomplete question :
What does a multiple-mode fiber optic cable do?
A.uses multiple rays of light running at different angles to transmit data
B.uses a single ray of light to transmit data
C.uses radio signals to transmit data
D.uses sound waves to transmit data
Learn more about multimode optical fibre :
brainly.com/question/29779951
#SPJ4
One opportunity cot familie face i the time value of money. What doe thi refer to?
A.
the income one get from a part-time job
B.
the time pent with loved one
C.
the change in interet rate over a period of time
D.
the monetary increae found in earning intere
The given statement, "One opportunity cost that families face is the time value of money," refers to the income obtained from a part-time job. As a result, Option A is correct.
What exactly is an opportunity cost?
The concept of opportunity cost allows one to choose the best option from among those available. It allows us to make the best use of all available resources while maximising economic gains.
The opportunity cost is the profit lost when one option is chosen over another. The concept merely serves as a reminder to consider all viable options before making a decision.
When a company, for example, follows a specific business plan without first weighing the pros and cons of other options, they may overlook the opportunity costs involved and the possibility that they could have achieved even greater success had they taken a different path.
As a result, Option A is correct.
To learn more about opportunity cost, visit: https://brainly.com/question/14799130
#SPJ4
The error is below; Error = "must declare a named package because this compilation unit is associated to the named module 'FinalProject'" I need some help addressing this issue. How do I fix it to run my program?
Using this keyboard shortcut, you can get to the Run command window quickly: Windows + R: On your keyboard, simply press R while holding down the Windows key.
How do I get my program to run again?To run a built-in Windows program, type "start" followed by the program's name (for example, "start notepad"). Use "cd" to open the program's file-containing folder before running it from any other folder. The "Show Run as different user command on Start" policy must be enabled in the Local Group Policy Editor User Configuration -> Administrative Templates ->Start Menu and Taskbar section (gpedit) before the "Run as different user" option can be added. msc).
An application may fail to launch at times due to a previous .The process from that application has not properly exited and is still running in the background. Click the right mouse button on the Taskbar at the bottom of your screen to see if the process is still running. A menu will appear as a result.
Learn more about Programming :
brainly.com/question/23275071
#SPJ4
Which of the variables have the value 50 after executing the code segment?
Answer Choices:
A: x only
B: y only
C: x and z only
D: x, y, and z
Answer:
x ,z
Explanation:
There is no printing. If the integer number num is larger than the minimum value and less than the maximum value, the following code segment will set the Boolean variable inRange to true. Thus, option A is correct.
What variables have to execute the code segment?
The ability to combine several lines of code into a single unit that may be used in our program is one of the most crucial programming ideas. This was originally written as a sub-program. The terms “macro,” “sub-routine,” “procedure,” and “module” are also used.A data segment is a section of a program's virtual address space that houses the programmer-initialized global variables and static variables.Text, data, and system data segments all exist within an executable program's process. The text and data segments are the components of a process' address space.Therefore, Though it is a component of the process, the system is responsible for maintaining the system data segment, which the process can only access through system calls. Programming code is present in the text portion.To learn more about code segment refers to:
https://brainly.com/question/21886906
#SPJ4
chapter 2 discussion questions 199199 unread replies.199199 replies. answer the following questions from chapter 2: how does decomposing a user story into scenes and shots help you organize the components of an alice program? what is the difference between a scene method and a class method? what is the value of adding comments to a program? what is meant by the assertion that an alice object has six degrees of freedom?
Other languages frequently refer to a class method as a static method. one that is callable even in the absence of a class instance.
Explain about the class method?Rather than being connected to an object, a class method is one that is bound to the class. Unlike staticmethod, it doesn't necessitate the construction of a class instance. A class method differs from a static method in that: The only thing that a static method interacts with is the parameters; it has no knowledge of the class.
Class methods are often helpful when we need to access the class itself, such as when we want to create a factory method, which is a function that makes instances of the class. So class methods can act as substitute constructors. All objects that belong to a class can use the same method. A class method can be called by passing the class as the first argument.
To learn more about the class method refer to:
https://brainly.com/question/20216706
#SPJ4
plsss helpp me anyone plsss≥
In this lab, you complete a prewritten Python program that computes the largest and smallest of three integer values. The three values are -50, 53, 78. Instructions Two variables named largest and smallest are assigned for you. Use these variables to store the largest and smallest of the three integer values. You must decide what other variables you will need and initialize them if appropriate. Write the rest of the program using assignment statements, if statements, or elif statements as appropriate. There are comments in the code that tell you where you should write your statements. The output statements are written for you. Execute the program. Your output should be: The largest value is 78 The smallest value is -50
firstNumber = -50
secondNumber = 53
thirdNumber = 78
if (firstNumber >= secondNumber and firstNumber >= thirdNumber):
largest = firstNumber
elif (secondNumber >= firstNumber and secondNumber >= thirdNumber):
largest = secondNumber
else:
largest = thirdNumber
if (firstNumber <= secondNumber and firstNumber <= thirdNumber):
smallest = firstNumber
elif (secondNumber <= firstNumber and secondNumber <= thirdNumber):
smallest = secondNumber
else:
smallest = thirdNumber
print('The largest value is ' + str(largest))
print('The smallest value is ' + str(smallest))
To know more about Python program visit:
https://brainly.com/question/28691290
#SPJ4
write a boolean expression that evaluates to true if age is greater than 13 and less than 18. assume a variable age has been defined.
The expression evaluates to true if the value of age is greater than 13 and less than 18.
(age > 13) && (age < 18)Checking if Age Falls Within a RangeThe expression (age > 13) && (age < 18) checks if the value of age is greater than 13 and less than 18. If both conditions are true, the expression evaluates to true, otherwise it evaluates to false. This expression can be used to check if a person's age falls within a certain range, such as between 13 and 18.
This expression can be used to check if a person's age falls within a certain range. If both conditions are true, the expression will evaluate to true, otherwise it will evaluate to false.
Learn more about Boolean expression: https://brainly.com/question/15078651
#SPJ4
two student computer hackers used their time in the school computer lab to break into the administrative network and change their report card grades to straight a's. when the administration traced the problem to the time and computer station used by those particular students, they were not allowed to use the school computers for the rest of the year. which operant conditioning term applies to this consequence?
The operant conditioning term applies to this consequence, Omission training
What is omission training?
Omission training is a behavior-analytic term that refers to specific form of punishment in which a positive event is withdrawn contingent on occurrence of a target behavior (e.g., property destruction, aggression toward other people).
In applied behavior analytic literature, omission training typically is referred to as negative or type II punishment.
Everyday examples include loss of privileges (e.g., having to leave zoo early contingent on hitting your mom, loss of one’s driver’s license for getting too many speeding tickets). Time-out and response cost are two most commonly used forms of omission training. Time-out is the removal of a positive event contingent on occurrence of problem behavior.
Response cost is the removal of specified amount of a positive reinforcer contingent on occurrence of a problem behavior
learn more about omission training at
https://brainly.com/question/29799133
#SPJ4
This consequence is referred to as "omission training." conditioning term applies to this consequence.
What exactly is "omission training?"Omission training is a behavior-analytic term for a specific type of punishment in which a positive event is withdrawn upon the occurrence of a target behavior (such as destruction of property or aggression toward others). Omission training is typically referred to as negative or type II punishment in the literature on applied behavior analysis.
Omission training importance :Loss of privileges is an everyday example, such as having to leave the zoo early in the event that you hit your mother or losing your driver's license because you received too many speeding tickets. Omission training typically consists of two components: response cost and timeout. The removal of a positive event in response to the occurrence of problematic behavior is known as a time-out. Response cost is when a problem behavior occurs, a certain amount of a positive reinforcer is taken away.
Learn more about omission training :
brainly.com/question/14394407
#SPJ4
use the web to research the history of the basic, c , java, and python programming languages, and answer the following questions: who was the creator of each of these languages? when was each of the languages created? was there a specific motivation behind the creation of these languages? if so, what was it?
Answer:
Basic:
Creator: John G. Kemeny and Thomas E. Kurtz
Date Created: 1964
Motivation: Kemeny and Kurtz developed Basic as a simple programming language for use in teaching computer science to non-science students at Dartmouth College. They wanted to create a language that was easy to learn and use, and that would allow students to write simple programs to solve mathematical problems.
C:
Creator: Dennis Ritchie
Date Created: 1972
Motivation: C was developed as a systems programming language at Bell Labs, primarily to create the UNIX operating system. Ritchie and his team wanted to create a language that was high-level enough to be easy to use, but low-level enough to give the programmer fine-grained control over the computer's hardware and resources.
Java:
Creator: James Gosling, Mike Sheridan and Patrick Naughton
Date Created: 1995
Motivation: Java was developed at Sun Microsystems as a platform-independent programming language for use in consumer electronic devices such as cable set-top boxes, video game consoles, and other embedded systems. The team wanted to create a language that would be easy to write, run, and maintain, and that would be portable across different platforms and devices.
Python:
Creator: Guido van Rossum
Date Created: 1989
Motivation: Python was developed by van Rossum as a high-level programming language for general-purpose use. He wanted to create a language that was easy to read and write, and that would be well-suited for a wide range of tasks, such as web development, scientific computing, and data analysis.
The programming languages Basic, C, Java and Python were created by John G. Kemeny and Thomas E. Kurtz, Dennis Ritchie, James Gosling, and Guido van Rossum respectively. Their motivations ranged from facilitating non-science students to access computing, system developments, a platform-agnostic design, to creating a language easy to read and write.
Explanation:The programming language Basic was created by John G. Kemeny and Thomas E. Kurtz in the mid-1960s at Dartmouth College to provide computer access to non-science students. It was designed with simplicity and universality in mind.
C language was developed by Dennis Ritchie at Bell Labs in the early 1970s. The main motivation behind the development of the 'C' language was to facilitate the development of the Unix operating system.
Java was created by James Gosling from Sun Microsystems (Sun) in 1995. The primary motivation was to design a language that could be used on various platforms, for multiple types of devices (computers, mobile phones, televisions etc). This led to the 'Write Once, Run Anywhere' concept.
Python was created by Guido van Rossum and first released in 1991. Rossum's primary goal in creating Python was to make it the easiest language to read and write.
Learn more about Creation of Programming Languages here:
https://brainly.com/question/32901513
#SPJ2
what is the first method a security tester should attempt to find a password for a computer on the network?
A computer networking tool called netcat (often abbreviated to nc) is used to read from and write to network connections using TCP or UDP. The command is intended to act as a reliable back-end that can be used directly or is simple to use as a driver for other programmes and scripts.
What is the most effective way to stop NetBIOS attacks?You can prevent abuse of the NetBIOS service in addition to disabling it by blocking TCP & UDP port 137 in your Windows firewall.
What is the purpose of NetBIOS?A network service called NetBIOS (Network Basic Input/Output System) makes it possible for programmes running on various computers to communicate with one another over a local area network (LAN). It was created in the 1980s to be used with early IBM PC networks.
To know more about computer networking visit:-
brainly.com/question/14276789
#SPJ4
How Parents can use this type of program to block access to selected Websites?
There are a few ways that parents can use programs to block access to selected websites. One option is to use parental control software, which can be installed on a computer or mobile device and configured to block specific websites or types of content.
What is parental control software?
Parental control software is a type of software that allows parents to monitor and control their child's use of the internet and other digital devices.
It can be used to set limits on the websites that a child can visit, the amount of time they can spend online, and the types of apps and games they can use. Some parental control software also includes features such as monitoring of social media activity and text messaging.
The goal of parental control software is to provide parents with tools to help keep their children safe online and ensure that they are using technology in a responsible and appropriate manner.
To know more about Website, visit: https://brainly.com/question/28431103
#SPJ4
Why the computer restarted unexpectedly or encountered an unexpected error?
When there is a problem with your hard drive connectors, you may encounter the "the computer restarted unexpectedly loop Windows 10" error. Look to see whether the cables connecting your motherboard and hard drive are slack.
Why does my PC repeatedly restart?The computer may reboot often due to system instability or hardware failure. The RAM, Hard Drive, Power Supply, Graphics Card, or External Devices could all be at fault, or it could be a BIOS or overheating problem.
What causes Windows 10 installations to continually failing?This problem could indicate that you need to apply the necessary updates on your computer. Before you try upgrading, double-check that your PC has all necessary updates loaded.
To know more about hard drive visit :-
https://brainly.com/question/10677358
#SPJ4
which section in the navigation pane allows a user to create sensitivity assumption categories that can be applied to multiple portfolios and properties?
Sensitivity assumption section in the navigation pane allows a user to create sensitivity assumption categories that can be applied to multiple portfolios and properties .
What is Sensitivity analysis ?
Sensitivity analysis establishes the impact of various independent variable values on a specific dependent variable under a specific set of assumptions.
Sensitivity analyses, then, investigate the ways in which different types of uncertainty in a mathematical model affect the overall level of uncertainty in the model.
What does forecasting sensitivity mean?
A prediction's starting condition errors can be evaluated objectively using a forecast sensitivity analysis, which also identifies areas where more observations are needed to lower forecast errors.
A framework for analysis that helps with dealing with uncertainty is sensitivity and risk analysis. The goal is to lessen the likelihood of taking on undesirable initiatives while accepting good ones as well.
Learn more about Sensitivity assumption
brainly.com/question/28249987
#SPJ4
a technician surveys an office space to document the network. upon discovering a network closet, the technician finds a network bridge. after examing the possibilities, what description satisfies the technician's notes regarding the bridge?
The correct answer a technician is a technician surveys an office space to document the network. The technician finds a network bridge after finding a network closet.
A router is a networking device that routes data packets in computer networks. Between networks and on the worldwide Internet, routers handle traffic steering. Go to the settings on your phone. Choose "About device." Click "Status." The IP address of your device may be found here, among other details. A router is a networking tool used to transfer data packets between computer networks. Router. If both LANs implement the same set of protocols, a router is a network layer hardware device that transports data from one LAN to another.
To learn more about network click the link below:
brainly.com/question/15088389
#SPJ4
how to connect jumper cables to a 2017 ford escape ?
Place a clamp on the red positive (+) cable's battery terminal for the disabled car. The booster vehicle's red positive (+) battery terminal should be connected to the other end of the red positive (+) cable.
What is the right way to connect jumper cables?Here is how to arrange your jumper cables properly: Connect the red clip to the positive wire of your dead battery (RED to DEAD). DONOR to RED The functional battery from the donor car should have the red clip connected to the positive terminal.
When attaching jumper cables Which hue belongs where?One red cable should first be clamped to the battery's positive side if it won't start. The other red clamp should then be connected to the positive side of the operational battery.
To know more about battery terminal visit :-
https://brainly.com/question/13995478
#SPJ4
the list below tracks people and the books they check out from the local library. we sometimes need to delete a person by deleting the row(s) containing that person. if we delete the person in row 3 (long, shelia), we also erroneously delete the data for the book named legend. what is this term for this type of mistake?
SQL's TRUNCATE statement clears the table's space and eliminates all data from it.
Tables are used in relational databases to hold data. Each column in a table stores a certain sort of data (integer, real number, character string, date, "") and is arranged in rows. A row is used to contain the information for one "instance" of a table. The database management system was developed in order to store enormous amounts of data, which can take any form, including images, text, audio files, and video files. Users of DBMS can store and access data in any format.
Learn more about database here-
https://brainly.com/question/29633985
#SPJ4
write a main function that first, calls the first function, second, calls the second function and finally returns 0.
One to verify the standard division procedure, and the other to verify the divide by zero condition.
The Java programming language is used to develop the Calculator class. Since the question does not call for them, there are no fields (instance variables), and there are no constructors. According to the query, four ways (functions) are produced: addition, subtraction, multiplication, and division. Be aware that the case of an illegal division is handled by the if statement in the divide () function (by 0). The function divemaster is declared in the program above, and it dives the first parameter with the second to return the result. There is no possibility of a divide by zero error because the if else block in the divemaster function's body is utilized to confirm that the second input is not zero. The divemaster function is called using two print statements in the main section.
Learn more about The Java programming language here:
https://brainly.com/question/15182353
#SPJ4
a network technician needs to connect a user's pc to the wired ethernet network. what is the best device the technician should use to connect the pc into the wired network?
A user's PC must be connected to the wired Ethernet network by a network specialist. What is the BEST thing the tech should connect the PC with?
What kind of hardware connects an Ethernet network to a computer?Hub. A hub is a physical device that connects various LAN-connected devices together. A laptop, desktop computer, and printer, for instance, can all join the same local network by plugging their Ethernet connections into a hub's ports.
What is the most suitable tool for the technician to use when joining the computer to the wired network?Wired nodes are connected to the network using switches and hubs. Switches are used for sophisticated hardware that can recognize MAC addresses and function better than hubs. Consequently, a switch should must always be preferred over hubs as the finest choice.
To know more about technician visit:-
https://brainly.com/question/14083709
#SPJ4
(Not a test or quiz)
Which statement best describe when you would need to use a Thunderbolt 3 port as opposed to a DisplayPort or an HDMI port?
When you need to transmit a digital and analog video signal on the same port and cable
When you need to transmit video, audio, data, and power on the same port and cable
When the system is missing a DVI and/or VGA port to transmit video and audio signals
When you do not have a DVI to VGA adapter to convert digital signals to an analog format
Answer: The option that would be best is OPTION 2.
Explanation:
Reasoning behind this is because thunderbolt 3 has the technology to transmit video, audio, data, and power at the same time. While HDMI is mostly limited to audio and video. DisplayPort is similar to HDMI also delivering video and audio.
The statement that best describe when you would need to use a Thunderbolt 3 port as opposed to a Display. Port or an HDMI port is When you need to transmit video, audio, data, and power on the same port and cable. Thus, option B is correct.
What is Reasoning?Reasoning behind this is because thunderbolt 3 has the technology to transmit video, audio, data, and power at the same time. While HDMI is mostly limited to audio and video. DisplayPort is similar to HDMI also delivering video and audio.
When you need to transmit a digital and analog video signal on the same port and cable and when you need to transmit video, audio, data, and power on the same port and cable and When you do not have a DVI to VGA adapter to convert digital signals to an analog format.
Therefore, The statement that best describe when you would need to use a Thunderbolt 3 port as opposed to a Display. Port or an HDMI port is When you need to transmit video, audio, data, and power on the same port and cable. Thus, option B is correct.
Learn more about VGA adapter on:
https://brainly.com/question/30001047
#SPJ2
in question 6, suppose one computer is upgraded from windows 10 professional to windows server 2019. which networking model can the network now support that it could not support without the upgrade?
In question 6, if a computer is upgraded from Windows 10 Professional to Windows Server 2019, it can now support the Domain-based networking model that it could not support without the upgrade.
What do you mean by domain-based networking model?The Domain-based networking model is a centralized model in which a central server called a domain controller is used to authenticate and authorize network access. This model is typically used in larger organizations and it requires the use of a server operating system like Windows Server.
Windows 10 Professional does not have the capabilities to act as a domain controller, but Windows Server 2019 does.
With the upgrade to Windows Server 2019, the computer can now function as a domain controller and support the Domain-based networking model, allowing for centralized management and control of network access. It also supports other advanced features like active directory, group policy management, and domain name system (DNS) integration, which are not present in Windows 10 Professional.
To know more about server visit:
https://brainly.com/question/7142205
#SPJ4
what is the definition of portability in iso-9126 model? group of answer choices the ability of transferring software through network the ability of running the software in different hardware, software, and runtime environments. the ability of conveying software using portable storages none of above
The ability of running the software in different hardware, software, and runtime environments.
What is the definition of portability in iso-9126 model?Portability in the ISO-9126 model is defined as the ability of software to be transferred through networks, as well as the capability to run on different hardware, software, and runtime environments. This term is closely related to compatibility, which is the ability of software to run on different hardware and software without the need for any additional modifications.Portability is important to software development because it allows the software to be used on different hardware and software platforms. This makes it easier for software to be used in different environments and makes it easier for software developers to maintain and update the software.An example of portability in software is the ability to share a program with someone else on a different computer. The program can be transferred through a network, or it can be put on a portable storage device that can then be used on another computer.Portability makes software more accessible and user-friendly, as users can use the software on different hardware and software platforms. It also helps software developers maintain the software and keep it up to date, as it is easier for software to be ported between different systems.To learn more about the definition of portability in iso-9126 model refer to:
https://brainly.com/question/27960072
#SPJ4
what is the python shell? an integrated development environment for developing python programs. an alternative to idle or thonny. a window in which python statements and expressions are executed immediately. a help system for python programming. 2
The Python shell is an interactive environment for running Python code. It provides a prompt that allows you to type in Python statements and expressions, which are then executed immediately.
It is an alternative to using a text editor and running Python programs from the command line. The Python shell can also be used as a help system for Python programming, as it allows you to explore the different modules and functions available in Python.
Python is an interpreted, high-level, general-purpose programming language. It was created by Guido van Rossum and first released in 1991. Python is a popular language for web development, data science, scripting, and automation tasks. It is designed to be easy to read and understand, and it supports multiple programming paradigms such as object-oriented, functional, and procedural programming.
Learn more about Python:
https://brainly.com/question/26497128
#SPJ4
declare double variables x1, x2, x3, and x4, and read each variable from input in that order. find the average of x1, x2, x3, and x4 and assign the result to avgnumber. the calculation is: ex: if the input is 1.0 3.5 4.0 2.0, the output is:
The code to find average of x1, x2, x3, and x4 and assign the result to avgnumber:
import java.util.Scanner;
public class Exercise12 {
public static void main(String[] args) {
Scanner in = new Scanner(System.in);
System.out.print("Input first number: ");
int num1 = in.nextInt();
System.out.print("Input second number: ");
int num2 = in.nextInt();
System.out.print("Input third number: ");
int num3 = in.nextInt();
System.out.print("Input fourth number: ");
int num4 = in.nextInt();
System.out.print("Enter fifth number: ");
int num5 = in.nextInt();
System.out.println("Average of five numbers is: " +
(num1 + num2 + num3 + num4 + num5) / 5);
}
}
What is variable?Variables are storage containers for data values. Variables in Java can be of various types, such as: String - Text such as "Hello" is stored in this type of variable. Double quotes are used to surround string values. Integers (whole numbers) without decimals, such as 123 or -123, are stored in int.
Here,
The code for calculating the average of x1, x2, x3, and x4 and assigning the result to avgnumber is as follows:
import java.util.Scanner;
public class Exercise12 {
public static void main(String[] args) {
Scanner in = new Scanner(System.in);
System.out.print("Input first number: ");
int num1 = in.nextInt();
System.out.print("Input second number: ");
int num2 = in.nextInt();
System.out.print("Input third number: ");
int num3 = in.nextInt();
System.out.print("Input fourth number: ");
int num4 = in.nextInt();
System.out.print("Enter fifth number: ");
int num5 = in.nextInt();
System.out.println("Average of five numbers is: " +
(num1 + num2 + num3 + num4 + num5) / 5);
}
}
To know more about variable,
https://brainly.com/question/13544580
#SPJ4
The Tranportation Security Adminitration (TSA) at a large airport ha 175 agent hired and trained for the month of January. Agent earn an average of $3,300 per month and work 160 hour per month.
Your hourly wage would be $19.04 per hour if you earned $3,300 per month. By dividing your base salary by the number of hours worked per week and month, you get this number.
The Transportation Security Administration is what?In order to guarantee people and businesses' freedom of movement, the Transportation Security Administration (TSA) safeguards the nation's transportation systems. To guarantee people's and businesses' freedom of movement, safeguard the nation's transportation systems.
TSA was established by the Aviation and Transportation Security Act, which was passed by the 107th Congress and signed on November 19, 2001. In March of 2003, the Transportation Security Administration (TSA) joined the Department of Homeland Security and now employs 25% of DHS employees. The TSA covers both general aviation and commercial aviation; systems for mass transit; passenger and freight trains; pipelines, ports, and highways.
Learn more about Transportation security :
brainly.com/question/27939029
#SPJ4
undecidable problems and unreasonable time algorithms
Unreasonable time algorithms take an unreasonable amount of time to solve, but undecidable problems can never be solved by an algorithm that can only produce a yes-or-no response.
Can an algorithm resolve an intractable issue?Even the most powerful computer in the world with limitless time cannot solve certain issues, such as those that are undecidable. If a question should have a "yes" or "no," it is considered to be undecidable.
What effects does the problem's indeterminacy have?There is no algorithm that can solve the problem in all situations, yet it might be workable in some. The maxPairSum() procedure was created by a programmer to compute the largest sum of all pairs in a list of numbers.
To know more about algorithms visit:-
https://brainly.com/question/21493957
#SPJ4
Question:
Explain the difference between undecidable problems and unreasonable time algorithms.