A) Metamorphic and sedimentary rocks would be the two rock types you would expect to see sitting next to each other after a very long period characterized by only uplift and erosion.
After a very long period characterized by only uplift and erosion, you would expect to see metamorphic and sedimentary rocks sitting next to each other. Uplift exposes rocks to the surface, where erosion breaks them down into sediments. These sediments are then deposited and eventually form sedimentary rocks.
At the same time, the pressure and heat associated with uplift can cause changes in existing rocks, leading to the formation of metamorphic rocks.
Learn more about erosion here: brainly.com/question/30587260
#SPJ11
use your model to predict the relative positions of the earth, sun, and moon when the moon is full.
Based on the model of the relative positions of the Earth, Sun, and Moon, we can predict that during a full moon:
The Earth is located in between the Sun and the Moon.The Moon is on the opposite side of the Earth from the Sun.The Sun, Earth, and Moon are aligned in a straight line, with the Earth in the middle.This alignment causes the Sun's light to fully illuminate the side of the Moon that faces the Earth, resulting in a bright full moon visible from Earth.
It is important to note that this model is based on the relative positions of the Earth, Sun, and Moon, and does not take into account other factors that may affect the appearance of the full moon, such as atmospheric conditions or the location of the observer on Earth.
To know more about solar system refer to-
https://brainly.com/question/12075871
#SPJ11
analyze the sedimentary rocks ni fgi. a6.3.1. below each photograph, describe the rock briefly, using your observations of its apparent composition (what ti is made of), texture (the size, shape, and arrangement of its parts), and anything else you notice that might help you to interpret the rock.
to always consider the context of the rock in terms of its environment and geological history when interpreting your observations.
1. Composition: Observe the rock and determine what materials it is made of. Common components include sand, silt, clay, organic matter, or mineral fragments. 2. Texture: Examine the size, shape, and arrangement of the components within the rock. Consider whether the rock has well-sorted or poorly-sorted particles, the grain size, and if the grains are angular or rounded. 3. Additional Observations: Note any other features of the rock that may help in interpretation, such as color, layering or bedding, presence of fossils, or any unique features that could provide insights into the rock's formation or depositional environment. Remember to always consider the context of the rock in terms of its environment and geological history when interpreting your observations.
Learn more about rock here:https://brainly.com/question/19930528
#SPJ11
A container holds 100 atoms of an isotope. This isotope has a half-life of 1.5 months. How many atoms of the radioactive isotope will be in the container after 3 months?
A) 25 atoms
B) 33 atoms
C) 50 atoms
D) 100 atoms
The atoms of the radioactive isotope will be in the container after 3 months is C) 50 atoms. An isotope is a variation of an element that has a different number of neutrons in its nucleus.
Some isotopes are unstable and will decay over time, releasing energy and/or particles in the process. This is what we call a radioactive isotope.
The half-life of a radioactive isotope is the amount of time it takes for half of the atoms in a sample to decay. In this case, the half-life of the isotope is 1.5 months, meaning that after 1.5 months, 50 of the 100 atoms in the container will have decayed.
After another 1.5 months (a total of 3 months), another half of the remaining 50 atoms will have decayed, leaving only 25 atoms. However, since we started with 100 atoms, and only 50 have decayed, that means there are still 50 atoms of the radioactive isotope left in the container. Therefore, the answer is C) 50 atoms.
Learn more about half-life here:
brainly.com/question/24710827
#SPJ11
which of the following is not correct for el nino event?a.during el nino events, convection is over the central pacificb.during el nino events, rising air is over the central pacificc.warm water is over the central pacific ocean during el nino eventd.during el nino events, rising air is over the western pacific
The appropriate response that is inapplicable to the El Nio occurrence is Rising air is present across the western Pacific during El Nio events. The best decision is Option D.
When an El Nio event occurs, surface waters in the eastern and central tropical Pacific warm, which may have an impact on air circulation. The area with the most convection and rising air moves eastward towards the central Pacific as a result of this warming.
Convection (option a), rising air (option b), and warm water (option c) are all present over the central Pacific during El Nio events. Therefore, for El Nio-related events, option (d) is untrue. Option D is the right choice as a result.
For such more question on Pacific:
https://brainly.com/question/10576035
#SPJ11
What term is best described as a massive pluton?
The term that is best described as a massive pluton is a batholith. A batholith is a large, intrusive igneous rock formation that forms from the cooling and solidification of magma deep within the Earth's crust.
These formations can cover an area of hundreds of square kilometers and can be several kilometers thick. Batholiths are often composed of granite or other coarse-grained igneous rocks, and are typically found in mountainous regions where they have been exposed by erosion. Due to their size and massive nature, batholiths can have significant geological and economic implications, as they can be sources of valuable mineral deposits and can also affect the stability of the surrounding rock formations.
Overall, the term batholith is the best description of a massive pluton due to its size and importance in geology.
Learn more about pluton here:
https://brainly.com/question/1101292
#SPJ11
_____ Describe how an entire suite of silicate minerals form from a single basaltic magma as it cools and cryatalizes
Silicate minerals form from basaltic magma through a process called fractional crystallization. As basaltic magma cools and crystallizes, minerals with different compositions and melting points solidify at varying temperatures, creating a suite of silicate minerals.
Initially, basaltic magma contains a mix of elements such as silicon, oxygen, aluminum, iron, magnesium, and more. As the magma cools, the first minerals to crystallize are those with high melting points, like olivine and pyroxene. These minerals are rich in iron and magnesium and are called mafic minerals. As the cooling process continues, the remaining liquid magma becomes more enriched in elements such as aluminum and potassium. This leads to the formation of plagioclase feldspar, which has a lower melting point compared to the mafic minerals. Further cooling causes minerals such as potassium feldspar, quartz, and biotite to form, which are richer in silica and are known as felsic minerals. In this way, a single basaltic magma can produce an entire suite of silicate minerals as it cools and crystallizes. These minerals can eventually form different types of igneous rocks, such as gabbro, diorite, and granite, depending on their composition and the specific conditions during the cooling process. Understanding this process helps geologists study the Earth's crust and provides insight into the formation of various rock types and mineral resources.
Learn more about basaltic magma here
https://brainly.com/question/15185246
#SPJ11
During the early Neolithic Era, people relied on domesticated animals to provide each of the following except
A hides for clothes
B. Labor to pull plows
C. Manure for the soil
D. Meat, cheese, and milk for food
Primary lahars were generated during the Nevado del Ruiz eruption in 1985 when ______.
Primary lahars were generated during the Nevado del Ruiz eruption in 1985 when the volcano's summit crater collapsed, triggering a massive release of pyroclastic material and meltwater from the glacier that covered its peak.
The eruption sent hot ash, gas, and pumice down the volcano's slopes at high speeds, melting the glacier and causing a catastrophic mudflow that swept through the surrounding towns and valleys, killing over 23,000 people. The lahars were composed of a mixture of volcanic debris, water, and sediment that rapidly moved down the steep terrain, picking up additional material and debris along the way. The lahars were particularly destructive due to their speed and volume, as they overwhelmed everything in their path, destroying buildings, bridges, and roads. The disaster caused by the Nevado del Ruiz eruption led to significant changes in volcano monitoring and disaster response strategies, and it serves as a cautionary tale for communities living near active volcanoes worldwide.
Know more about Nevado del Ruiz here:
https://brainly.com/question/11240209
#SPJ11
What's the difference between low carrying capacity and high carrying capacity?
The difference between low carrying capacity and high carrying capacity is that Low carrying capacity means the specific habitat has small population size while High carrying capacity has large population size.
The maximum number of creatures that a given ecosystem can maintain is known as its carrying capacity. The ability of an ecosystem to renew the food, water, environment, or other essentials that populations need to survive may be one of many elements that affect an ecosystem's carrying capacity for a particular species.
The ecology may no longer be suited for the species to live if a population grows above its carrying capacity. Resources may run out entirely if the population continues to grow faster than the environment can support.
Learn more about carrying capacity:
https://brainly.com/question/30266162
#SPJ4
What type of boundary is present along the eastern boundary of the North American plate?
The eastern boundary of the North American plate is marked by a divergent boundary. This boundary is where the North American plate separates from the Eurasian plate and the African plate.
As the plates move apart, magma rises from the mantle and solidifies to create new oceanic crust. This process is known as seafloor spreading and results in the formation of the Mid-Atlantic Ridge. The Mid-Atlantic Ridge is a continuous underwater mountain range that extends from the Arctic Ocean to the southern Atlantic Ocean. The divergent boundary along the eastern edge of the North American plate is responsible for the formation of this ridge. The process of seafloor spreading also causes earthquakes and volcanic eruptions along the boundary.
The eastern boundary of the North American plate is constantly shifting and changing due to the movement of the plates. Overall, the divergent boundary along the eastern edge of the North American plate plays a significant role in the geology and natural hazards of the region.
Learn more about North American here:
https://brainly.com/question/29633157
#SPJ11
most igneous rocks in the Sierra-Nevada batholith formed form:
a. a hot spot beneath continental crust
b. continental rifting
c. ocean-continent convergence
d. transform faulting
Answer:
The answer is not provided in the given prompt. Can you please provide more information or context to your question?
Explanation:
Which ocean is associated with most tsunamis?
A) Pacific Ocean
B) Arctic Ocean
C) Indian Ocean
D) Atlantic Ocean
The Pacific Ocean is associated with most tsunamis.
The Pacific Ocean is commonly known as the "Ring of Fire" due to the presence of numerous underwater earthquakes and active volcanoes. This region is responsible for producing most of the world's tsunamis, as earthquakes and volcanic eruptions can generate powerful ocean waves that can travel thousands of miles across the ocean before reaching land.
In recent history, some of the most devastating tsunamis have occurred in the Pacific Ocean, including the 2004 Indian Ocean tsunami, the 2011 Tohoku earthquake and tsunami in Japan, and the 2018 Sulawesi earthquake and tsunami in Indonesia.
While tsunamis can occur in other oceans as well, the Pacific Ocean remains the most susceptible due to its high seismic activity.
Learn more about tsunamis here:
https://brainly.com/question/14782736
#SPJ11
The _______ alone determines the poison" is a principle that can be applied to the deaths of humans and animals near Lake Nyos from carbon dioxide.
Explain each factor's role in American success despite considerable loyalist opposition and Britain's apparently overwhelming military and financial advantages
In the American Revolution, several factors contributed to the American success despite considerable loyalist opposition and Britain's seemingly overwhelming military and financial advantages.
1. American: The strong determination and motivation for independence among the American patriots played a crucial role in their success. They were fighting on their home turf, which provided them with knowledge of the terrain, and their goal of self-governance made them resilient against hardships.
2. Loyalist opposition: Although there was loyalist opposition to the revolution, it was not unified or as committed as the patriots. Loyalists often lacked effective leadership, and their support for Britain waned as the war continued. This division within the colonies weakened Britain's position and allowed the Americans to exploit these internal conflicts.
3. Britain: Despite Britain's military and financial advantages, they faced several challenges during the war. Long supply lines and communication delays made it difficult for them to maintain their forces in the colonies. Furthermore, Britain's focus was divided between the American colonies and other global interests, which limited the resources they could dedicate to the war effort.
Overall, the combination of American determination, loyalist opposition's disunity, and Britain's logistical challenges contributed to the success of the American Revolution despite the odds.
To learn more about American Revolution, click here:
https://brainly.com/question/27833385
#SPJ11
if star a has a magnitude of -10 and star b has a magnitude of -3, how much brighter will star a appear in the sky than star b
The difference in brightness between two stars can be calculated using their difference in magnitude, as the magnitude scale is logarithmic. The magnitude of a star is a measure of its brightness as seen from Earth.
In this case, star A has a magnitude of -10 and star B has a magnitude of -3. The difference in magnitude between the two stars is 10 - (-3) = 13. Since the magnitude scale is logarithmic, a difference of 5 magnitudes corresponds to a brightness ratio of 100:1.
Therefore, the difference in brightness between star A and star B is [tex]100^(13/5) = 17898.16:1[/tex].
This means that star A will appear 17898.16 times brighter than star B in the sky. However, it's important to note that the apparent brightness of a star can also be affected by its distance from Earth and any intervening dust or gas that may absorb or scatter its light.
To know more about magnitude scale refer to-
https://brainly.com/question/29414996
#SPJ11
Anyone who searches for an ore deposit is called a(n) ______________.
Anyone who searches for an ore deposit is called a prospector. A prospector is a person who explores the land to find valuable minerals, metals, or other geological resources.
Prospecting can involve various methods such as geological mapping, geophysical surveys, drilling, and sampling. The goal of a prospector is to locate a deposit that contains enough valuable material to justify the cost of mining and extraction. Prospecting can be a challenging and time-consuming process, requiring a lot of skill and experience. Prospectors must have a good understanding of geology, as well as the economic factors that determine the viability of a deposit. In addition, they must be able to navigate difficult terrain, work in remote locations, and deal with unpredictable weather conditions. Overall, prospecting is an important first step in the mining process. Without prospectors, we would not have access to many of the valuable resources that we rely on in our daily lives.
Learn more about prospector here
https://brainly.com/question/30368948
#SPJ11
As the speed changes what did you notice about the molecules freedom of movement
Water turns from a liquid into a gas known as water vapour. In comparison to molecules in a liquid, gas molecules are more flexible. Gas can expand to fill its container because its molecules are free to move apart.
In the gas phase, a molecule can move, rotate, or vibrate in a variety of different ways. This is referred to as its molecular degrees of freedom. Translational, rotational, and vibrational degrees of freedom are the three different types that exist.
According to the Kinetic molecular theory, as the temperature rises, the energy of each water molecule increases, causing the molecules to move more swiftly. The hydrogen bonds that hold water molecules together begin to dissolve when you heat water to a high enough temperature, which causes the molecules to move too much and cause gas formation.
Learn more about water vapour:
https://brainly.com/question/26133468
#SPJ4
If a rock undergoes folding and is compressed to form an upward arch, this is a(n) _____ type fold.
If a rock undergoes folding and is compressed to form an upward arch, this is a type of anticline fold.
Anticline folds are characterized by an upward arch of rock layers, formed when the layers are compressed and pushed together from both sides. The central axis of an anticline fold is usually oriented parallel to the direction of compression, and the layers of rock on either side of the axis dip away from the center of the fold.
As the layers are pushed together, they may also be deformed and bent, creating the folding patterns that can be observed in the rock. Overall, anticline folds are an important geological feature that can provide insights into the history and evolution of the Earth's crust.
Learn more about central axis here:
brainly.com/question/20426325
#SPJ11
proximity to inputs can be beneficial to manufacturers when:
a. access to consumers is made difficult by remote locations.
b. other site factors are more expensive than previously thought.
c. access to markets is threatened by dangerous weather conditions.
d. their raw materials are more expensive to transport than their products
e. their products are more expensive to transport than their raw materials.
Proximity to inputs can be beneficial to manufacturers when:
a. access to consumers is made difficult by remote locations.Benefit of being close to input to manufacturersManufacturers can benefit from being close to their inputs, such as raw materials, when transporting these inputs carries a higher cost than delivering finished products.
Transportation costs form a significant portion of the total production expenses for manufacturers. The location of raw materials close to the manufacturing unit reduces transportation costs and results in lower overall prices and greater profitability.
In contrast, if raw materials are located far from manufacturing sites and freight charges run high, substantial expenses could be added to the production process.
Learn more about manufacturers at
https://brainly.com/question/13440987
#SPJ1
How will foliation in continental metamorphic rocks formed during subduction be oriented?
A) perpendicular to the direction of plate movement
B) parallel to the direction of plate movement
C) oblique to the direction of plate movement
B) parallel to the direction of plate movement.
In the case of foliation in continental metamorphic rocks formed during subduction, the orientation will be:
Foliation is a term used to describe the alignment of minerals in metamorphic rocks, and it typically forms perpendicular to the direction of the maximum compressional stress applied during metamorphism. In subduction zones, the compressional stress is related to the movement of tectonic plates. Thus, the foliation will be oriented perpendicular to the direction of plate movement.
Foliation forms in metamorphic rocks when minerals are reoriented or recrystallized under directed pressure and high temperature. As pressure is applied, minerals with a platy or elongated shape, such as micas and amphiboles, align themselves perpendicular to the direction of maximum stress.
This creates a parallel arrangement of minerals, giving the rock a banded or layered appearance. The orientation of foliation can help determine the direction of applied stress during rock formation, as it is typically perpendicular to the direction of maximum stress.
Learn more about :
Foliation : brainly.com/question/31323478
#SPJ11
causes of summer monsoon
Which of the following describe the role of ocean currents and continental positions on glaciations and global climate?
Cold ocean currents may inhibit the growth of glaciers by putting less moisture into the atmosphere.
Upwelling ocean currents may bring cold water to the surface, helping to cool the land.
Ocean currents and continental positions play a crucial role in regulating global climate and affecting glaciations. Cold ocean currents can reduce the amount of moisture in the atmosphere, which can inhibit the growth of glaciers. The correct option is B
This is because glaciers need moisture to form and expand, so if there is less moisture available, they may not grow as much or may even recede.
On the other hand, upwelling ocean currents can bring cold water to the surface, which can cool the surrounding land. This can create more favorable conditions for the growth of glaciers and contribute to a colder global climate.
Continental positions can also impact glaciations by altering the distribution of land masses and their distance from the poles. For example, when continents are positioned near the poles, they can experience more severe glaciations and colder temperatures.
Overall, ocean currents and continental positions play a complex and dynamic role in shaping global climate and the growth of glaciers. The correct option is B
To know more about glaciers refer here:
https://brainly.com/question/19709729#
#SPJ11
Complete question is:
Which of the following statements correctly describe the role of ocean currents and continental positions on glaciations and global climate?
A) warm currents may either inhibit or increase glaciation
B) cold ocean currents may inhibit the growth of glaciers by putting less moisture into the atmosphere
C) upwelling ocean currents may bring cold water to the surface, helping to cool the adjacent landmasses
Read the case study on the Magaliesberg Mountains in FIGURE 2.1 before answering the questions that follow. Resistant layer Lass resistant rock 2.1.1 A + 2.1.2 B The rocks of the Bushveld Igneous Complex contains the world's richest source of platinum group minerals, chromite and vanadium. The Magaliesberg Mountains Lie about 40 km north-west of Tswane. The Mountains are the Southern boundary of the Bushveld Igneous Complex. It formed over 2 000 million years ago. It is a huge saucer-shaped intrusion. Identify the structural landform depicted in FIGURE 2.1. Identify the slopes labelled A and B on the landform. Refer to F (1 x 1) (1) (2 x (2) 2.2.1 2.2.2
The structural landform that is shown in the text is an intrusive igneous landform, and it is known as a saucer-shaped intrusion.
What are the rock?Landforms refer to characteristics present on the surface of the Earth, comprising geographical elements like hills, gorges, flatlands or highlands.
According to the details given in the question, is identified as the Bushveld Igneous Complex, an intrusive igneous landform that emerged more than two billion years ago. The gigantic intrusion, shaped like a saucer, comprises the planet's most abundant reserves of chromite, vanadium, as well as that of platinum group minerals.
Learn more about rock from
https://brainly.com/question/26046551
#SPJ1
When an object collides with a moon, the energy that forms the impact crater comes from () energy of the object. The size of the impact crater depends upon the () and () of the object.
The energy that forms the impact crater comes from the Kinetic Energy of the object. When an object collides with a moon, it releases an enormous amount of energy that creates an impact crater.
The size of the impact crater depends upon the mass and velocity of the object. The greater the mass and velocity of the object, the larger the impact crater will be. In detail, the kinetic energy of the object is transformed into heat and shock waves during the collision. This creates a powerful force that excavates the material and forms the crater. Additionally, the angle of impact, the composition of the object, and the surface of the moon can also affect the size and shape of the impact crater. Overall, the formation of impact craters is an important process that has shaped the surface of many celestial bodies in our solar system.
The size of the impact crater depends upon the mass and velocity of the object. Firstly, Understand that the energy responsible for the impact crater is kinetic energy, which is defined as the energy an object possesses due to its motion then Recognize that the size of the impact crater is influenced by the object's mass and velocity. Mass refers to the amount of matter in the object, while velocity is the speed at which the object is travelling in a specific direction.
and finally note that a larger mass or a higher velocity will generally result in a larger impact crater, as more kinetic energy is being transferred during the collision.
To know more about Kinetic Energy visit:
https://brainly.com/question/26472013
#SPJ11
Which two features are typically found associated with each other?
A)Domes and reverse faults
B)Synclines and anticlines
C)Monoclines and basins
D)Synclines and domes
E)Anticlines and normal faults
Synclines and anticlines are two features that are typically found associated with each other.
Synclines are downward folds in the rock layers, whereas anticlines are upward folds. They are usually found together in a symmetrical pattern. Anticlines are convex upward folds that are shaped like an arch, while synclines are concave downward folds that resemble a trough.
The presence of these two features can be useful in locating oil and gas deposits since they often occur in sedimentary rock formations where these resources are found.The formation of synclines and anticlines is a result of tectonic forces acting on the Earth's crust, causing it to bend and fold. When these forces are compressive, such as in convergent plate boundaries, they create folds like anticlines and synclines. In contrast, extensional forces, such as in divergent plate boundaries, create faults like normal faults.
Learn more about anticlines here:
https://brainly.com/question/25850559
#SPJ11
the star alderamin has an apparent magnitude of 2.4 and an absolute magnitude of 1.4. the star merak has an apparent magnitude of 2.4 and absolute magnitude of 0.5. assuming that neither star has been dimmed by interstellar clouds, we can say for sure that merek is
The apparent magnitude of a star is its brightness as seen from Earth, while the absolute magnitude is its brightness if it were located at a standard distance of 10 parsecs (about 32.6 light years) away from Earth. Based on the given information, we can conclude that Merak is brighter than Alderamin because it has a smaller absolute magnitude (-0.5 compared to 1.4).
This means that if both stars were located at the same distance from Earth, Merak would appear brighter than Alderamin. However, since they have the same apparent magnitude of 2.4, we can assume that they are at different distances from Earth.
In fact, since Merak has a smaller absolute magnitude, it must be closer to Earth than Alderamin. This illustrates the usefulness of absolute magnitude in determining the true brightness of stars, regardless of their distance from Earth.
To know more about star mass refer here:
https://brainly.com/question/31393602?referrer=searchResults
#SPJ11
Using the data given in the text, calculate Venus's angular diameter, as seen by an observer on Earth, when the planet is (a) at its brightest, (b) at greatest elongation, and (c) at the most distant point in its
To calculate Venus's angular diameter, we can use the formula θ = 2arctan(d/2D), where θ is the angular diameter, d is the physical diameter, and D is the distance from Earth to Venus.
According to the text, Venus's physical diameter is 12,104 km and its average distance from Earth is 41 million km.
(a) At its brightest, Venus is at its closest distance to Earth, which is about 38 million km. Plugging these values into the formula, we get θ = 0.65 arcseconds.
(b) At greatest elongation, Venus is at a distance of about 100 million km from Earth. Using the same formula, we get θ = 0.24 arcseconds.
(c) At the most distant point in its orbit, Venus is about 261 million km away from Earth. The formula gives us θ = 0.09 arcseconds.
In summary, Venus's angular diameter varies depending on its distance from Earth. When it's closest to Earth, it appears largest, and when it's farthest away, it appears smallest.
To know more about Venus refer here:
https://brainly.com/question/29566394#
#SPJ11
What does "-zoic" in the eras of the geologic time scale refer to?
A)Water
B)Rock
C)Life
D)Fossilization
C) Life. The term "-zoic" in the eras of the geologic time scale refers to life. The suffix is derived from the Greek word "zoe", which means life. In the context of geology, it is used to denote different time periods characterized by specific types of life forms, rock formations, and fossilization processes.
The "-zoic" in the eras of the geologic time scale refers to life. This suffix is used to indicate a period in Earth's history that is characterized by a particular type of life, such as the Paleozoic era (which is marked by the proliferation of marine life and the emergence of the first land plants and animals) or the Mesozoic era (which is known as the "Age of Dinosaurs"). Fossilization, on the other hand, refers to the process by which organic material is preserved in rock over time, leading to the creation of fossils.
Learn more about Fossilization here: brainly.com/question/31419516
#SPJ11
analyze the samples of sedimentary limestone and metamorphic marble ni fg.i a7.3.1. 1. these rocks are both composed of the same mineral. what is the mineral? what test could you perform on the rocks to be sure? .2 how do the textures of these two rocks differ, fi ta al?
1. The mineral that is commonly found in both limestone and marble is calcite. A simple test that can be performed on both limestone and marble is the acid test.
2. The textures of limestone and marble differ because they have undergone different geological processes.
Calcite is a mineral that is frequently present in both limestone and marble. The calcium carbonate mineral calcite is formed either inorganically, through precipitation from groundwater, or in marine conditions.
The acid test is a quick procedure that can be used on both marble and limestone to determine the presence of calcite.
Due to their distinct geological processes, limestone and marble have varied textures. Shells, coral, and other marine debris accumulate to produce the sedimentary rock known as limestone. Its texture is largely homogeneous and is made up of calcite crystals that fit together.
On the other hand, marble is a metamorphic rock that develops when limestone is re-crystallized under intense heat and pressure.
For such more question on limestone:
https://brainly.com/question/13390134
#SPJ11
gouache is a type of watercolor, which has chinese white chalk added to it to create an opaque surface.True or False
True.
Gouache was typically made by mixing watercolours based on gum arabic with an opaque white pigment. In the nineteenth century, watercolours began to be industrially produced in tubes and a "Chinese white" tube was added to boxes for this purpose.
The given statement "gouache is a type of watercolor, which has chinese white chalk added to it to create an opaque surface " is true.
Gouache is a type of watercolor that is characterized by its opaque and matte finish, which is achieved by adding white pigment such as Chinese white chalk to the paint mixture.
Unlike traditional transparent watercolors, gouache can be used to create layered and textured effects on a wider range of surfaces, including dark or colored paper. Gouache also dries more quickly and allows for easier corrections than traditional watercolors.
Additionally, gouache can be reactivated with water even after it has dried, allowing for greater flexibility in the creation process.
Overall, gouache is a versatile and popular medium for artists who want to explore the unique properties of opaque watercolors and experiment with different techniques and effects.
To know more about Gouache refer to-
https://brainly.com/question/30101144
#SPJ11