Answer:
Kr
Explanation:
the element that is in group 18 is noble gasses. the elements are helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), radon (Rn), and oganesson (Og).
Which chemicals are major contributors to ozone layer destruction? Select two answer choices.
Answer:
what are the answers to select? or do you just say them
Explanation:
???
Answer:
c and d
Explanation:
Why must the difference between the water level in the eudiometer tube and the water level in the beaker be measured
Answer:
Explanation:
The difference between the water level in the eudiometer tube and the water level in the beaker must be measured because we have to put into consideration, the pressure of the gases in the eudiometer tube. This said pressure of gas in the eudiometer must equal the atmospheric pressure. If or by chance, the water levels happens not to be at the same height, then this is not the case. And then, as a result, in order to account for the difference between both, while also being able to get accurate results, you have to find the difference or subtract the water levels and then go ahead in converting them to mmHg.
If the jet is moving at a speed of 1140 km/h at the lowest point of the loop, determine the minimum radius of the circle so that the centripetal acceleration at the lowest point does not exceed 6.0 g's.
Answer:
The radius is [tex]r =1705.44 \ m[/tex]
Explanation:
From the question we are told that
The speed is [tex]v = 1140 \ km /h = \frac{1140 * 1000}{3600} = 316.67 \ m/s[/tex]
The centripetal acceleration is [tex]a = 6 g's = 6 * 9.8 = 58.8 \ m/s^2[/tex]
Generally the centripetal force acting on the jet is mathematically represented as
[tex]F_c = \frac{m * v^2 }{r}[/tex]
Generally this centripetal force is equal to the net force acting which according to Newton's third law is mathematically represented as
[tex]F = m * a[/tex]
So
[tex]\frac{m * v^2 }{r} = ma[/tex]
=> [tex]\frac{ v^2 }{r} = a[/tex]
=> [tex]r = \frac{v^2}{a}[/tex]
=> [tex]r = \frac{316.67^2}{58.8}[/tex]
=> [tex]r =1705.44 \ m[/tex]
If the brakes are applied and the speed of the car is reduced to 13 m/s in 14 s, determine the constant deceleration of the car.Express your answer to three significant figures and include the appropriate units. Assume ais negative if it acts in the opposite sense to the positive velocity.
Answer:
Explanation:
v = u + at
v is final velocity , u is initial velocity , a is acceleration and t is time .
here v = 0 , u = 13 m /s , t = 14 s
putting the values
0 = 13 + 14 a
a = 13 / 14 m /s²
= - .9286
= - 0.929 m /s²
A current of 15 Amps flows through a circuit with a resistance of 0.10 Ohms. What is the voltage?
A. 0.006 Volts
OB. 1.5 Volts
O C. 15 Volts
D. 150 Volts
Voltage = (current) x (resistance) (Ohm's law)
Voltage = (15 A) x (0.10 ohm)
Voltage = 1.5 volts (B)
If you push a heavy box at rest, you must exert some force before it begins to move. Once its moving, you don’t have to as much force. Which of Newton’s three laws explains this?
Answer:
momentum does
Explanation:
Maggots feed on dead and decaying organisms for energy. What are maggots?
autotrophs
producers
decomposers
heterotrophs
Answer:
Explanation:
Decomposers is the correct answer
Answer:
Decomposers is the right answer
Explanation:
Maggots are decomposers because they eat the dead bodys for energy
I don't know if the thing I wrote it truse so ya
A solid keeps its shape due to which of the following factors?
Space between particles
Attractive forces between particles
The type of element in the solid
The container it is placed in
Answer:
c
Explanation:
because whatever elements are used like gas uses water evaporation so yeah
Answer:
(A) Space between particles!
Explanation:
Solids can hold their shape because their molecules are tightly packed together!
✞ Bye Have A Nice Day! ✞
Calculate the velocity of an object moved around a circle with a radius of 1.65 m and an
acceleration of 3.5 m/s2.
Answer:
2.4m
Explanation:
Given parameters:
Radius of circle = 1.65m
Acceleration = 3.5m/s²
Unknown:
Velocity of the object = ?
Solution:
To solve this problem, we have to apply the formula of centripetal acceleration;
Centripetal acceleration = [tex]\frac{v^{2} }{r}[/tex]
v is the velocity
r is the radius
v² = centripetal acceleration x radius
Insert parameters and solve;
v² = 3.5 x 1.65
v = √5.775 = 2.4m
The velocity of the object as it moves around a circle with the given radius and acceleration is 2.4m/s.
Given the data in the question;
Radius; [tex]r = 1.65m[/tex]Centripetal acceleration; [tex]a_c = 3.5m/s^2[/tex]Velocity; [tex]v = \ ?[/tex]
From the centripetal force equation, we use the expression for centripetal acceleration:
[tex]a_c = \frac{v^2}{r}[/tex]
Where [tex]a_c[/tex] is the centripetal acceleration, v is the velocity and r is radius.
We substitute our given values into the equation
[tex]3.5m/s^2 = \frac{v^2}{1.65m} \\\\v^2 = 3.5m/s^2\ *\ 1.65m\\\\v^2 = 5.775m^2/s^2\\\\v = \sqrt{5.775m^2/s^2} \\\\v = 2.4m/s[/tex]
Therefore, the velocity of the object as it moves around a circle with the given radius and acceleration is 2.4m/s.
Learn more: https://brainly.com/question/17689540
A 16-V battery powers a series circuit that contains two lightbulbs The
voltage across the first lightbulb is 12-V
Complete question:
A 16-V battery powers a series circuit that contains two lightbulbs. The voltage across the first lightbulb is 12-V.
a. What fractional part of the circuit's total energy is transformed in the first lightbulb? Simply your answer.
b. What fractional part of the circuit's total energy is transformed in the second lightbulb? Simply your answer.
Answer:
(a) Fraction of energy of the first bulb in the total energy of circuit is 3/4
(b) Fraction of energy of the second bulb in the total energy of circuit is 1/4
Explanation:
Given;
total voltage across the series circuit, [tex]V_T[/tex] = 16 V
voltage across the first light bulb, V₁ = 12 V
The voltage across the second light bulb is given by;
V₂ = [tex]V_T[/tex] - V₁
V₂ = 16 V - 12 V
V₂ = 4 V
The total power across the circuit is given by;
P = I[tex]V_T[/tex]
P = 16I
Where;
I is the constant current in the circuit
(a)
power in the first light bulb is given by;
P₁ = 12I
Fraction of this power in the total energy of circuit is given by;
[tex]\frac{P_1}{P} = \frac{12I}{16I} = \frac{3}{4}[/tex]
(b)
power in the second light bulb is given by;
P₂ = 4I
Fraction of this power in the total energy of circuit is given by;
[tex]\frac{P_2}{P} = \frac{4I}{16I} = \frac{1}{4}[/tex]
How would the photographer use the polarizing filter to find out the direction of polarization of the light coming from the blue sky?
Answer:
by rotating the filter
Explanation:
Rayleigh's scattering is given by the process of the scattering of light by molecules. This is very important physical phenomenon. Polarization is also an effect of light scattering.
A photographer wishes to capture photos of some cloud formation by using the polarizing filter. So the photographer will have to rotate the polarizing filter until the intensity of the light becomes maximum such that the light polarization is acts along the axis of the filter.
A car drives 150 km SE and then 50 km due N. What is the car's displacement?
Answer:
If the car travels 150 kilometers to the Southeast, and then 50 kilometers to the North, it is understood that the car does not travel the same way out as it does back. Therefore, the car's displacement will be the sum of both distances traveled, that is, 150 + 50, which is equal to 200. Therefore, the car traveled about 200 kilometers from its starting point.
Full moon is located______
a. farthest from the Sun
b. at a 90 degree angle with the Sun and Earth
c. closest to the Sun
Answer:
Im going to take an educated guess and say its B.
Explanation:
A Full moon is located farthest from the Sun. Thus, the correct option for this question is A.
What is a Full moon?A full moon may be defined as one of the types of lunar phases when the Moon significantly appears fully illuminated from Earth's perspective. This event typically occurred when Earth is located between the Sun and the Moon.
When the earth is located between the sum and the moon, it is the time when the moon is located farthest from the sun. And it directs to an event of a full moon. The average time duration of the full moon and the repetition of the same phase normally requires 29.53 days.
Therefore, the Full moon is located farthest from the Sun. Thus, the correct option for this question is A.
To learn more about the Full moon, refer to the link:
https://brainly.com/question/15032553
#SPJ2
What is the momentum of a 8850 kg medium truck that is traveling with a velocity of 55 m/s west on the highway
Answer:
486,750 kg*m/s
Explanation:
Momentum is mass*velocity
M = m*v
M = 8850kg*55m/s
M = 486,750 kg*m/s
The momentum of an 8850 kg medium truck that is traveling with a velocity of 55 m/s west on the highway is 486750 kg m / s.
What is momentum?Momentum is the result of a particle's mass and velocity. Being a vector quantity, momentum possesses both magnitude and direction. According to Isaac Newton's second equation of motion, the force acting on the particle equals the time rate of change of momentum.
According to Newton's second law, if a particle is subjected to a constant force for a specific amount of time, the result of the force and time (referred to as the impulse) is equal to the change in momentum.
Given:
The mass of the truck is, m = 8850 kg,
The velocity of the truck is, v = 55 m/s,
Calculate the momentum of the truck as shown below,
Momentum = m × v
Momentum = 8850 × 55
Momentum = 486750 kg m / s
Thus, the Momentum of the truck is 486750 kg m / s.
To know more about momentum:
https://brainly.com/question/904448
#SPJ2
how is life determined on math
Answer:
you can use math as a banker, a doctor, a scientist, the president probably uses math, you use math to see how much less juice you gave your sibling, and you can use math to help in collage! (sorry if its wrong tell me if it is)
Answer: Isn't it because we use it daily especially with financial needs, scientific research, and the way people even use it to cook
Explanation: Therefore everything, especially in physics where you determine what density, distance, and equations following the scientific research.
Help !! I hate science
Answer:
iron nail rusting
Explanation:
Which two terms indicate the same area of the body? *
Answer:
For example, the toes are anterior to the heel, and the popliteus is posterior to the patella. Superior and inferior, which describe a position above (superior) or below (inferior) another part of the body. For example, the orbits are superior to the oris, and the pelvis is inferior to the abdomen.
Explanation:
carter found the rock shown in the picture below near a river
Answer:
there's no picture
Explanation:
and what would the question be anyways?
Answer:
what is the question
Explanation:
A type of cuckoo clock keeps time by having a mass bouncing on a spring, usually something cute like a cherub in a chair. What force constant is needed to produce a period of 0.320 s for a 0.0190-kg mass?
Answer:
k = 7.32 N/m
Explanation:
We know that the time period of a spring mass system is given as follows:
T = 2π√(m/k)
T² = 4π²m/k
k = 4π²m/T²
where,
k = force constant = ?
m = mass = 0.019 kg
T = Time Period = 0.32 s
Therefore,
k = 4π²(0.019 kg)/(0.32 s)²
k = 7.32 N/m
What is the magnitude of the tangential acceleration of a bug on the rim of a 13.0-in.-diameter disk if the disk accelerates uniformly from rest to an angular speed of 79.0 rev/min in 3.80 s
Answer:
The correct solution will be "12.48 in/s²".
Explanation:
The given values are:
Angular speed
= 79.0 rev/min
Time
= 3.80 seconds
Now,
⇒ [tex]Angular \ acc.=\frac{(\frac{79\times 2\times \pi}{60})}{3.8}[/tex]
[tex]=\frac{8.2}{3.8}[/tex]
[tex]=2.1 \ rad/s^2[/tex]
Tangential acceleration will be:
= [tex]Angular acc.\times radius[/tex]
= [tex]2.1\times 6.5\times 0.0254[/tex]
= [tex]0.3467 \ m/s^2[/tex]
= [tex]12.48 \ in/s^2[/tex]
How does cold water affect the speed of dissolving?
A. Cold water slows down dissolving
B. Cold water speeds up dissolving
C. Cold water has no effect on dissolving
D. Cold water completely stops dissolving
Answer:
Cold water slows down dissolving
Cold water slows down dissolving. Hence, option (A) is correct.
What is the relationship between the solubility and the temperature?The basic relationship between solubility and temperature is as follows: A solid will dissolve more readily at higher temperatures.
Likewise, a solid element dissolves more slowly at lower temperatures. This is all due to the solvent becoming more and more excited by the heat, making it easier for it to split or break apart entirely.
for while in gases The solubility of gases decreases more rapidly as temperature rises. A gas is more soluble in water when the temperature is lower.
Henry's law, which states that the gas becomes more soluble as the pressure above the liquid solution increases, summarizes another characteristic of gas solutes.
Learn more about solubility here:
https://brainly.com/question/29661360
#SPJ2
A water molecule is made up of one oxygen and two hydrogen atoms. Why is water considered a pure substance?
Answer:
A mixture is when two or more substances combine physically together.
However, in water, two hydrogen atoms combine with one oxygen atom chemically, forming a new substance that has properties different from hydrogen alone or oxygen alone.
Explanation:
Which sequence shows electromagnetic waves arranged in a decreasing order of their wavelengths?
Answer: Gamma rays, x-rays, ultraviolet rays, visible light, and infrared rays.
Answer:
C) radio → infrared → ultraviolet → gamma
Explanation:
It Increases left to right therefore it decreases right to left
A box with weight of magnitude F_G = 2.00 N is lowered by a rope down a smooth plane that is inclined at an angle φ = 30.0 degrees about ve the horizontal. The normal force acting on the box has a magnitude n = 1.73 N, the tension force is 1.00 N, and the displacement Δr of the box is 1.80 m down the cloned plane.
What is the work W_G done on the box by the gravity?
Answer:
1.8 J
Explanation:
I had this exact question today and found someone who had solved it before, this was their response to the work done by gravity. They used the name "physicsmom"
Vertical distance = 1.8 sin 30 = .9 m
W = 2 N * .9 m = 1.8J
Good luck! I hope this helps!
The work done on the box by the gravity is 0.072 J.
The given parameters;
weight of the box, [tex]F_g[/tex] = 2 Ninclination of the rope, φ = 30⁰normal force acting on the box, n = 1.73 Ntension on the rope, T = 1 Ndisplacement of the box, Δr = 1.8 mThe work done on the box by gravity is calculated as follows;
W = FΔr
where;
F is the net horizontal force on the block
The net horizontal force on the box is calculated as follows;
[tex]\Sigma F_x = F_g sin(\theta ) - F_k\\\\ \Sigma F_x = F_g sin(\theta ) - \mu_k F_n \\\\ \Sigma F_x = 2 \times sin(30 ) - (tan \theta) \times F_n\\\\ \Sigma F_x = 1 - (tan\ 30) \times 1.73\\\\ \Sigma F_x = 0.04 \ N[/tex]
The work done on the box by gravity is calculated as;
W = 0.04 x 1.8
W = 0.072 J.
Thus, the work done on the box by the gravity is 0.072 J.
Learn more here: https://brainly.com/question/14945453
things that affects the demand for electricity
What is the density of the paint if the mass of a tin containing 5000 cm3 paint is 7 kg. If the mass of the empty tin, including the lid is 0.5 kg.
We are given:
Mass of the Paint bucket (with paint) = 7000 grams
Mass of the paint bucket (without paint) = 500 grams
Volume of Paint in the Bucket = 5000 cm³
Mass of Paint in the Bucket:
To get the mass of the paint in the bucket, we will subtract the mass of the bucket from the mass of the paint bucket (with paint)
Mass of Paint = Mass of Paint bucket (with paint) - Mass of the paint Bucket (without paint)
Mass of Paint = 7000 - 500
Mass of Paint = 6500 grams
Density of the Paint:
We know that density = Mass / Volume
Density of Paint = Mass of Paint / Volume occupied by Paint
Density of Paint = 6500/5000
Density of Paint = 1.3 grams / cm³
What happens as lakes get older?
Answer:
After several thousand more years, mesotrophic lakes gain nutrients from the fallen, decayed leaves from deciduous trees, decayed shoreline plants, decaying aquatic plants, and the remains of fish and other water creatures.
Explanation:
plz give me brainliest
What holds the metal ions together in a lattice?
A. covalent bonds
B. metallic bonds
C. hydrogen bonds
D. ionic bonds
Answer:
B. Metallic bonds.
if two objects masses 8kg and 24 kg are dropped from top of a building. Which one reaches the ground first
Based on the measured force between objects that are 10 meters apart, how can you find the force between objects that are any distance apart ?
Answer:
F' = 100 F/r²
Explanation:
The gravitational force of attraction between two objects is given by the Newton's Gravitational Formula. The Newton's Gravitational Formula is as follows:
F = Gm₁m₂/r²
where,
F = Force between objects
G = Universal Gravitational Constant
m₁ = mass of first object
m₂ = mass of second object
r = distance between objects = 10 m
Therefore,
F = Gm₁m₂/10²
Gm₁m₂ = 100F --------------------- equation (1)
Now, we consider these objects at any distance r apart. So, the force becomes:
F' = Gm₁m₂/r²
using equation (1), we get:
F' = 100 F/r²
So, if the force (F) between objects 10 m apart is known, we can find it at any distance from the above formula.
The force between objects that are any distance apart is expressed as [tex]P'=\frac{100P}{r^2}[/tex]
According to the gravitational law, the force acting on an object is directly proportional to the product of their masses and inversely proportional to the square of their distance apart. Mathematically,
[tex]P=\frac{GMm}{r^2}[/tex]
M and m are the masses
r is the distance between the masses
If the force between objects that are 10 meters apart, hence;
[tex]P=\frac{GMm}{10^2}\\P=\frac{GMm}{100}\\GMm = 100P[/tex]
To find the force between objects that are any distance apart, we will use the same formula above to have;
[tex]P'=\frac{GMm}{r^2}\\[/tex]
Substitute the result above into the expression to have:
[tex]P'=\frac{100P}{r^2}[/tex]
Hence the force between objects that are any distance apart is expressed as [tex]P'=\frac{100P}{r^2}[/tex]
Learn more on gravitational law here: https://brainly.com/question/11760568