Potential sources of destruction caused directly or secondarily by earthquakes include tsunamis, aftershocks, fires, landslides, and rockfalls. The correct option is e.
Tsunamis are large, powerful waves generated by the displacement of water due to seismic activity, which can cause widespread devastation upon reaching land.
Aftershocks are smaller earthquakes following the main event, which can further damage already weakened structures.
Fires can be ignited by ruptured gas lines or electrical faults resulting from the earthquake, leading to additional destruction.
Landslides and rockfalls occur when the seismic waves destabilize slopes and cliffs, causing soil, rocks, and debris to collapse and potentially impact structures or block access routes.
Each of these sources contributes to the overall damage and hazards associated with earthquakes.
To know more about Potential sources refer here:
https://brainly.com/question/16797540#
#SPJ11
Which are potential sources of destruction that may be caused either directly or secondarily by earthquakes?
a)Tsunamis
b)Aftershocks
c)Fires
d)Landslides and rockfalls
e)All the above
Select the correct answer.
Which sentence correctly describes a data set that follows a normal distribution with a standard deviation of 4 and a mean of 14?
OA. 68% of the data points lie between 10 and 14.
B.
68% of the data points lie between 8 and 12.
O C.
68% of the data points lie between 10 and 18.
O D. 68% of the data points lie between 10 and 16.
Answer:
C. 68% of the data points lie between 10 and 18.
Explanation:
The mean minus one standard deviation (14-4 = 10) is ten, and the mean plus one standard deviation (14 + 4 = 18) is 18. Everything withing the first standard deviation of a normal distribution is 68% of the population, two deviations is 95% of the population, and three deviations is 99% of the population. (According to the Empirical Rule)
a porphyritic igneous texture indicates that:
a. there was water in the magma
b. the rock cooled slowly and then quickly
c. the rock broke apart as it flowed
d. the rock cooled slowly
e. the ash and pumice were hot and became compacted
A porphyritic igneous texture indicates that the rock cooled slowly and then quickly.
Porphyritic texture is a common texture in igneous rocks, which are formed from the solidification of magma or lava. The texture is characterized by large, well-formed crystals (phenocrysts) surrounded by finer-grained matrix (groundmass).
The presence of two distinct grain sizes in the same rock indicates that the rock underwent two different cooling rates. The large crystals (phenocrysts) formed during slow cooling of the magma, usually deep below the Earth's surface, while the smaller crystals (groundmass) formed during the faster cooling of the magma or lava as it reached the surface or was exposed to the atmosphere.
Porphyritic textures can be found in a variety of igneous rocks, including granites, basalts, andesites, and rhyolites. The texture provides important clues about the cooling history and conditions of the magma or lava, which can be used to infer information about the geological processes that formed the rock.
Learn more about geological here:
https://brainly.com/question/5634603
#SPJ11
All of the following ideas were included in Christian teachings except __________. A. Loving one’s enemies B. Obeying the Ten Commandments C. Being thankful for one’s possessions D. Believing in the Father, Son, and Holy Spirit
All of the following ideas were included in Christian teachings except Being thankful for one’s possessions.
C is the correct answer.
Christians rely on the teachings, life, and death of Jesus Christ as the foundation for their faith. Christians firmly believe that the universe, earth, and heaven were all created by one God. Jewish religious thought is where the idea of a single God first emerged. As the "Messiah" or world's savior, Christians view Jesus as such.
The central tenet of Christianity is that sinful people can be made right with God by accepting and believing in the death and resurrection of Jesus. In doing so, they are given redemption and the possibility of experiencing eternal life.
Learn more about Christian teachings:
https://brainly.com/question/25540552
#SPJ4
which numbered feature(s) on this photograph are consistent with the presence of glaciers sometime in the past?
The numbered features on the photograph that are consistent with the presence of glaciers sometime in the past are features 2, 3, and 4.
Feature 2 shows a U-shaped valley, which is a common feature created by the erosion of glaciers. As the glaciers move through the valley, they scrape and carve the sides and bottom, creating a distinctive shape.
Feature 3 shows a moraine, which is a pile of rocks and sediment left behind by a glacier as it retreats.
Moraines are typically found at the end of glaciers, and their presence indicates that a glacier once extended to that location.
Feature 4 shows a cirque, which is a bowl-shaped depression in the mountainside that was created by glacial erosion.
These features are consistent with the presence of glaciers sometime in the past and provide evidence of the Earth's dynamic and ever-changing landscape.
To know more about glaciers refer here:
https://brainly.com/question/12109#
#SPJ11
concordant plutons cut across existing structures while discordant plutons are parallel to existing features
a. true
b. false
The correct answer is b. false. The statement you provided is incorrect. Concordant plutons are intrusive igneous rock bodies that are parallel to the existing structures, such as sedimentary layers, within the surrounding country rock.
The statement is actually the opposite. Concordant plutons are parallel to existing features while discordant plutons cut across existing structures. Concordant plutons form in parallel with the existing rock layers while discordant plutons are intrusive and cut through the existing rock layers. These terms are commonly used in geology to describe the relationship between igneous intrusions and the pre-existing rock formations. It is important for geologists to understand the orientation of these plutons as it helps them in understanding the geological history of the area. Discordant plutons, on the other hand, cut across the existing structures, intruding at angles that are not parallel to the surrounding rock formations. In summary, concordant plutons align with existing features, while discordant plutons cut across them.
Learn more about igneous rock here
https://brainly.com/question/20538428
#SPJ11
The name of the site where slippage begins and earthquake waves radiate outward is called the __________.
A)hypocenter
B)scarp
C) rupture surface
D)fault
E)epicenter
A) Hypocenter,the name of the site where slippage begins and earthquake waves radiate outward is called the hypocenter. This is also referred to as the "focus" of the earthquake.
The hypocenter is located beneath the Earth's surface and is where the initial rupture occurs along a fault plane. The earthquake waves then travel outward from the hypocenter, causing ground shaking and other seismic effects. The depth of the hypocenter can vary depending on the location and type of fault. Shallow earthquakes with hypocenters less than 70 km deep are considered to be crustal earthquakes, while those with hypocenters deeper than 70 km are considered to be subduction earthquakes. The hypocenter is an important concept in seismology and is used to determine the location and magnitude of earthquakes.
Learn more about focus here:
https://brainly.com/question/17161852
#SPJ11
Identify the effects of each conflict between populations and American Indian population
The effects of conflicts between different populations and the American Indian population. Here are some key terms and their effects on these conflicts:
1. Colonization: European settlers arrived in the Americas and established colonies, leading to land dispossession and displacement of American Indian populations.
2. Cultural assimilation: European settlers often attempted to assimilate American Indian populations into their culture, causing a loss of traditional values, languages, and practices among Native communities.
3. Forced relocation: American Indians were often forcibly removed from their ancestral lands to less desirable locations, leading to population decline, disrupted social structures, and loss of resources.
4. Disease: European settlers brought new diseases to the Americas that American Indian populations had no immunity against, causing devastating epidemics and significant population loss.
5. Treaties and reservations: Governments often made treaties with American Indian tribes to establish peace or land rights, but these treaties were frequently broken or unfairly negotiated, leading to the creation of reservations and further loss of sovereignty and resources for American Indian populations.
6. Warfare and violence: Conflicts between American Indians and other populations often resulted in violence, causing death, trauma, and further displacement of Native communities.
Visit here to learn more about American Indians : https://brainly.com/question/16404172
#SPJ11
Throughout American history, there have been numerous conflicts between different populations and the American Indian population.
One example of conflict between populations and the American Indian population is the Indian Removal Act of 1830. This act led to the forced relocation of tens of thousands of Native Americans from their ancestral lands to designated reservations in the West. The effects of this conflict were devastating for the Native American population, as they were forced to leave behind their homes and ancestral lands, resulting in a loss of cultural identity and heritage.
In more recent years, conflicts between populations and the American Indian population have centered around issues of land rights and natural resource management. For example, the construction of the Dakota Access Pipeline in 2016 sparked protests and clashes between the Standing Rock Sioux Tribe and law enforcement. The effects of this conflict have included heightened tensions between the government and Native American populations, as well as increased awareness of the importance of protecting tribal sovereignty and cultural heritage.
Overall, the effects of conflicts between populations and the American Indian population have been far-reaching and often devastating.
To learn more about American Indian population, click here:
https://brainly.com/question/5060283
#SPJ11
Describe the extent to which slaves are utilized as labor in each of these areas
Slaves were utilized as labor to a large extent in many areas such as agriculture, mining, construction, and manufacturing. In the agricultural sector, slaves were commonly used to cultivate crops such as cotton, tobacco, and sugar cane.
In the mining industry, slaves were used to extract valuable minerals from the earth such as gold and silver. In the construction industry, slaves were used to build roads, bridges, and other infrastructure projects. In the manufacturing sector, slaves were used to produce goods such as textiles and furniture. Overall, slaves were utilized as labor in a variety of industries and played a significant role in the economic development of many countries during the time of slavery.
In agricultural areas, slaves were primarily used for labor-intensive tasks like planting, cultivating, and harvesting crops. The most common crops in these areas were cotton, sugar, and tobacco. Slaves were also used for livestock management and other farm chores.
In urban areas, slaves worked in various roles, including as domestic servants, skilled laborers (such as blacksmiths, carpenters, and masons), and factory workers. They often performed tasks requiring specialized skills, contributing significantly to the economic growth of these areas.
In both agricultural and urban areas, slaves were essential to the economy and heavily relied upon for their labor. Their exploitation enabled their owners to accumulate wealth and maintain a high standard of living.
Visit here to learn more about slaves : https://brainly.com/question/16747534
#SPJ11
Slaves were heavily utilized as labor in many areas throughout history. In ancient civilizations such as Greece and Rome, slaves were used for tasks ranging from domestic work to agriculture and mining.
Slaves from Africa were transported by slave dealers, primarily to the Americas, during the Atlantic slave trade, transatlantic slave trade, or Euro-American slave trade. From the 16th to the 19th century, the Middle Passage and the triangular trade route were frequently employed in the slave trade.
During the colonization of the Americas, slaves were brought over from Africa and forced to work on plantations, primarily in the production of cash crops like tobacco and cotton. Slavery was also widely utilized in the Caribbean for the production of sugar, which was a lucrative industry at the time. In all of these areas, slaves were seen as a cheap and abundant source of labor, and their mistreatment and exploitation were justified by the economic benefits they provided to their owners.
To learn more about Slave trade, click here:
https://brainly.com/question/8667023
#SPJ11
Moving magma associated with volcanic activity generates earthquakes by___
Moving magma associated with volcanic activity generates earthquakes by exerting pressure on the surrounding rocks and crust.
As magma rises, it creates fractures and fissures in the rock, causing seismic waves to be released. These earthquakes can provide important clues about the behavior of magma beneath the Earth's surface and can be used to predict volcanic eruptions.
Moving magma associated with volcanic activity generates earthquakes by causing stress and displacements in the surrounding rock, leading to the release of seismic energy.
Visit here to learn more about magma brainly.com/question/16940653
#SPJ11
What minerals crystallize first out of a melt, as magma cools?
This process is described by Bowen's Reaction Series, which categorizes minerals into two branches: the discontinuous and continuous series.
In the discontinuous series, minerals with high melting points crystallize first, starting with olivine, followed by pyroxene, amphibole, and finally biotite. These minerals are rich in iron and magnesium, which makes them dense and dark in color.Hi! When magma cools, the minerals that crystallize first are those with the highest melting points. In the continuous series, plagioclase feldspar crystallizes at a range of temperatures, evolving in composition from calcium-rich to sodium-rich as the magma cools. This results in a continuous series of mineral compositions.In summary, the minerals that crystallize first out of a melt as magma cools are olivine and calcium-rich plagioclase feldspar. These minerals have high melting points, and their formation is guided by Bowen's Reaction Series.
Learn more about minerals here
https://brainly.com/question/15844293
#SPJ11
Arthur Mackmurdo's swirling design for this title page from Wren's City Churches is commonly referred to as the first ____________.
Arthur Mackmurdo's swirling design for the title page of Wren's City Churches is commonly referred to as the first "Art Nouveau" design. Art Nouveau was an artistic movement that emerged in the late 19th and early 20th centuries. It is characterized by its use of flowing, organic lines and natural forms, often inspired by plants and other elements found in nature.
Arthur Mackmurdo's swirling design for the title page of Wren's City Churches, featuring stylized plant-like motifs, is considered one of the earliest examples of this influential style. The Art Nouveau style was characterized by its flowing, organic forms, inspired by natural shapes such as flowers, leaves, and vines. It was also known for its intricate, detailed designs and use of new materials and techniques such as cast iron, stained glass, and curved lines. The style was particularly popular in architecture, graphic design, and decorative arts, and had a significant impact on the development of modern design.
Mackmurdo's design for the title page of Wren's City Churches, which was published in 1883, is considered to be one of the earliest examples of Art Nouveau design. Its swirling lines, intricate details, and use of asymmetry and negative space are all hallmarks of the style. Mackmurdo went on to become one of the leading proponents of the Arts and Crafts movement, which shared many of the same ideals and principles as Art Nouveau. In summary, Arthur Mackmurdo's swirling design for the title page of Wren's City Churches is commonly referred to as the first Art Nouveau design, and it played an important role in the development and popularization of this influential style.
To know more about Artistic Movement visit:
https://brainly.com/question/31455746
#SPJ11
Large volcanoes that have a low, broad shape and are made of successive flows of low viscosity lava are called
a. stratovolcanoes.
b. shield volcanoes.
c. cinder cones.
d. ignimbrites.
e. composite volcanoes.
The correct answer is b. shield volcanoes. These types of volcanoes are typically found at hot spots or divergent plate boundaries, where magma is able to rise to the surface without much obstruction.
The lava that is released from shield volcanoes has a low viscosity, meaning it is thin and fluid, and is able to flow easily and cover large areas. Over time, the successive flows of lava build up a low, broad shape that is characteristic of shield volcanoes. In contrast, stratovolcanoes (e) are tall, steep-sided volcanoes that are built up by layers of both lava and ash. Cinder cones (c) are small, cone-shaped volcanoes that are made up of loose volcanic debris, while ignimbrites (d) are deposits of volcanic ash and other pyroclastic material that have been welded together by heat and pressure. Composite volcanoes (e) are another term for stratovolcanoes, as they are composed of layers of both lava and ash.
Learn more about lava here:
https://brainly.com/question/15393639
#SPJ11
What were the results of the Missile Crisis for the USSR and Khrushchev (4)?
The Missile Crisis had significant consequences for both the USSR and Khrushchev. On one hand, the USSR was able to avoid a direct military confrontation with the United States, which could have resulted in catastrophic consequences.
The USSR was forced to remove their missiles from Cuba, which was a significant blow to their prestige and influence in the region. Additionally, Khrushchev's handling of the crisis was heavily criticized by members of the Soviet government and military, which led to his eventual downfall from power in 1964. In summary, while the USSR avoided a direct military conflict, the crisis damaged their reputation and weakened Khrushchev's leadership. The Missile Crisis resulted in the USSR, led by Khrushchev, agreeing to withdraw its nuclear missiles from Cuba in exchange for the US removing its missiles from Turkey. This compromise helped to de-escalate tensions between the two superpowers and avoid a potential nuclear war. However, Khrushchev's leadership was weakened as he was seen as backing down to US pressure. Ultimately, this contributed to his removal from power in 1964, with the crisis marking a turning point in the Cold War, emphasizing the need for improved communication and diplomacy between the USSR and the US.
Learn more about Missile Crisis here
https://brainly.com/question/457425
#SPJ11
In the Islamic Republic of Iran, which group examines all laws to ensure that they are acceptable under Islam? A. the Great Council B. the Supreme Court C. the Senate
In the Islamic Republic of Iran, the group that examines all laws to ensure that they are acceptable under Islam is the A. Great Council .
What is the Grand Council ?Following the 1979 Islamic Revolution in Iran, a body known as The Great Council was formed to oversee cultural and educational policies.
Comprising high-ranking government officials and religious scholars, it holds the power to assess all legislation and confirm its adherence to Islamic values and principles.
Find out more on the Grand Council at https://brainly.com/question/2477295
#SPJ1
Rank each lava type according to the relative distance it can generally travel from a volcano vent before solidifying.
A. Mafic
B. Intermerdiate
C. Felsic
The relative distance that each type of lava can travel from a volcano vent before solidifying depends on several factors, including the viscosity (thickness), temperature, and gas content of the lava.
Here is a general ranking of each lava type based on how far it can typically travel before solidifying: A. Mafic lava has a low viscosity, which means it flows easily and can travel long distances before solidifying. Mafic lava can form extensive lava fields and can travel tens of kilometers or more from the vent before solidifying. B. Intermediate lava has a higher viscosity than mafic lava, so it does not flow as easily. As a result, it can typically travel several kilometers from the vent before solidifying. C. Felsic lava has the highest viscosity of the three types, meaning it is the thickest and least fluid. Felsic lava typically solidifies close to the vent, within a few hundred meters to a few kilometers at most. It's important to note that these are general guidelines and that the actual distance that lava can travel before solidifying can vary widely depending on specific conditions at each volcano, such as the temperature and gas content of the lava, the topography of the area, and the presence of obstacles that may impede the flow of lava.
Learn more about temperature here:
https://brainly.com/question/15267055
#SPJ11
Describe the formation of Crater Lake. Compare it to the calderas found on shield volcanoes such as Kilauea.
Crater Lake was formed around 7,700 years ago when the volcano Mount Mazama erupted, causing its summit to collapse and creating a caldera. The caldera then filled with rainwater and snowmelt over time, forming the deepest lake in the United States.
In comparison to calderas found on shield volcanoes such as Kilauea, the formation of Crater Lake was much more explosive and cataclysmic. Shield volcanoes typically have relatively gentle eruptions, producing lava flows rather than explosive eruptions that cause caldera collapses. While Kilauea has experienced some caldera collapses in the past, they are not as large or dramatic as the one that formed Crater Lake. Additionally, Kilauea's calderas tend to fill with lava rather than water, creating a different type of volcanic feature.
Learn More about Mount Mazama here :-
https://brainly.com/question/13502481
#SPJ11
How does a pyroclastic surge differ from a pyroclastic flow?
A pyroclastic surge and a pyroclastic flow are both types of volcanic hazards that can occur during explosive eruptions. However, there are distinct differences between the two phenomena.
A pyroclastic flow is a high-density mixture of hot ash, gas, and rock fragments that flows down the slopes of a volcano at high speeds, typically reaching velocities of several hundred kilometers per hour. These flows are highly destructive and can travel several kilometers from the volcano's summit, burying everything in their path. They are generally initiated by the collapse of an eruption column or the partial failure of a lava dome.
On the other hand, a pyroclastic surge is a lower-density, turbulent cloud of volcanic ash and gas that travels radially away from the volcano's summit at high speeds. Surges are typically less dense and slower-moving than pyroclastic flows, and they can travel much further from the volcano's summit, reaching tens of kilometers in some cases. Pyroclastic surges are often caused by the collapse of eruption columns or the explosive release of gas from the magma chamber, which can initiate an outward-moving blast of hot ash and gas.
In summary, the primary difference between a pyroclastic surge and a pyroclastic flow is the density and speed of the material involved. Pyroclastic flows are denser and faster-moving, while pyroclastic surges are less dense and more turbulent, but can travel much further from the volcano's summit. Both phenomena can be extremely hazardous and pose a significant risk to people and infrastructure in the vicinity of an erupting volcano.
Know more about pyroclastic surge here:
https://brainly.com/question/29523773
#SPJ11
What source(s) of energy makes it possible to move matter through the rock cycle?
A. solar energy
B. the Earth's internal heat
C. gravity
D. All of the possible answers are correct.
The movement of matter through the rock cycle is possible due to several sources of energy, and all the given options are correct.
Solar energy plays a crucial role in the rock cycle. It drives the water cycle, which is an essential part of the rock cycle. Water carries minerals and other materials from one location to another, contributing to the formation of different rock types. Solar energy also causes weathering and erosion, which break down and transport rocks from one place to another. The Earth's internal heat is another significant source of energy that drives the rock cycle. It powers plate tectonics, which is the process of the Earth's crust moving and interacting with one another. This movement leads to the formation of mountains, the creation of volcanic eruptions and igneous rocks, and the recycling of old rocks back into the mantle.
Gravity also plays a vital role in the rock cycle. Gravity causes the movement of rocks and other materials downhill, leading to erosion and the formation of sedimentary rocks. It also causes tectonic plates to move and collide, leading to the formation of metamorphic rocks. In conclusion, the movement of matter through the rock cycle is possible due to several sources of energy, including solar energy, the Earth's internal heat, and gravity. These energy sources work together to drive the rock cycle and continually shape the Earth's surface over millions of years.
Learn more about sedimentary rocks here:
https://brainly.com/question/10709497
#SPJ11
Lava flows are rarely responsible for many volcano-related deaths because they ______.
Lava flows are rarely responsible for many volcano-related deaths because they typically move at a slow pace, allowing people to evacuate in time.
Volcanoes produce lava, a molten rock that flows out of the volcanic vent. As lava travels along the surface, it can create hazards such as property damage and wildfires. However, due to its viscous nature, lava generally advances at a slow speed, ranging from a few meters per hour to tens of meters per hour. This slow progress gives authorities ample time to warn residents in the affected areas and initiate evacuation procedures. Consequently, the number of fatalities directly caused by lava flows is relatively low when compared to other volcanic phenomena such as pyroclastic flows, lahars, or volcanic gas emissions. Pyroclastic flows, for example, are fast-moving, hot mixtures of gas and volcanic material that can be lethal and cause a higher number of casualties. In summary, while lava flows pose a threat to property and the environment, their slow-moving nature usually allows for effective evacuations, leading to a lower number of volcano-related deaths. It is essential for communities living near volcanoes to have well-prepared evacuation plans and follow local authorities' guidance to minimize the risks associated with volcanic eruptions.
Learn more about Lava here
https://brainly.com/question/29623706
#SPJ11
Which crop is exported by both Ecuador and Columbia from their tropical lowlands?
A.bananas
B.soybeans
C.cabbage
D.beets
Answer: A. Bananas
Explanation:
Undersea volcanic eruptions are one culprit in the formation of _______, which are the second most deadly volcanic process.
Undersea volcanic eruptions are one culprit in the formation of tsunamis, which are the second most deadly volcanic process.
When a volcano erupts under the sea, it can cause a sudden displacement of water that results in a series of powerful waves known as tsunamis. These waves can travel across the ocean at high speeds, and when they reach shore, they can cause significant damage and loss of life. In fact, some of the deadliest tsunamis in history have been triggered by undersea volcanic eruptions, including the 1883 eruption of Krakatoa in Indonesia, which generated a tsunami that killed more than 36,000 people. Scientists closely monitor undersea volcanic activity in order to predict and prepare for potential tsunamis, but predicting the exact timing and strength of these waves remains a challenge. Nevertheless, efforts are ongoing to improve our understanding of undersea volcanic activity and its potential impact on coastal communities, in order to minimize the risk of catastrophic tsunamis in the future.
Know more about tsunamis here:
https://brainly.com/question/14782736
#SPJ11
What are slickensides?
A)Fractures made in a rock as a result of tensional stress
B)Joints made as an igneous rock cools and contracts
C)Polished and striated surfaces made on fault blocks
D)Folded rocks along a convergent boundary
C) Slickensides are polished and striated surfaces made on fault blocks. They are formed due to the movement of rocks along a fault plane, which causes frictional forces between the two sides of the fault.
The frictional forces cause the polished and grooved surfaces of the fault block, with the direction of the grooves indicating the direction of movement along the fault. Slickensides are important in the study of faults and tectonic plates. By examining the orientation and characteristics of slickensides, geologists can determine the type and intensity of forces that caused the faulting, which can help in understanding the overall tectonic history of a region.
Learn more about frictional forces here:
https://brainly.com/question/30280752
#SPJ11
examine the following maps to answer the questions below: plate boundaries, distributions of earthquakes, distributions of volcanoes, age of the sea floor, ocean floor features: describe the pattern of earthquakes that you see on the earthquake/global seismicity map.
The earthquake/global seismicity map shows a clear pattern of earthquakes occurring primarily along plate boundaries, with a higher frequency of seismic activity at areas where plates are actively colliding or diverging.
This is consistent with the theory of plate tectonics, which explains that earthquakes are caused by the movement and interaction of tectonic plates.
On the map, we can see that there are dense clusters of earthquakes at the boundaries of the Pacific Plate, the North American Plate, the South American Plate, and the African Plate, as well as along the Mid-Atlantic Ridge and the Antarctic Plate. These areas are marked by intense seismic activity and are known for being highly prone to earthquakes and other tectonic hazards.
In contrast, there are relatively few earthquakes occurring in the interiors of the plates, which tend to be more stable and less prone to seismic activity. This pattern highlights the importance of plate boundaries in the generation of earthquakes, and the role of tectonic forces in shaping the Earth's crust.
Learn more about earthquake here:
https://brainly.com/question/29500066
#SPJ11
(T/F) Earthquake induced forces is an example of gravity loading on a structure.
False, earthquake-induced forces are not an example of gravity loading on a structure. They are instead considered lateral or horizontal forces, also known as seismic loading, which act on the structure during an earthquake. Gravity loading refers to the vertical forces acting on a structure due to its own weight and the weight of its contents.
Gravity loading refers to the weight of the structure and any other loads that are caused by the force of gravity, such as the weight of people or objects inside the building. Earthquake-induced forces, on the other hand, are caused by the shaking and movement of the ground during an earthquake and are classified as lateral loads. These forces can cause significant damage to a structure, particularly if it is not designed to withstand them.
Learn more about force of gravity: https://brainly.com/question/14874038
#SPJ11
a desert . multiple select question. occurs solely in subtropical environments receives less than 25 cm of precipitation per year is always covered with sand dunes has sparse vegetation often lacks permanent streams
The correct options are:Occurs solely in subtropical environmentsReceives less than 25 cm of precipitation per yearOften lacks permanent streams
Deserts can have a variety of landscapes and may or may not have sand dunes. The amount of vegetation can also vary, but it is generally sparse. The key defining factor of a desert is the lack of precipitation, which can lead to water scarcity and impact the availability of permanent streams. Deserts are typically found in subtropical regions, but they can also occur in other areas with low rainfall.A desert is a type of biome characterized by its dry climate, where the amount of precipitation is typically less than 25 centimeters per year. Deserts can occur in a variety of environments, not just subtropical regions, but also in cold regions, coastal regions, and even in the polar regions. Deserts can be covered with sand dunes, but not all deserts have extensive sand dunes. Some deserts are rocky, gravelly, or have hard-packed surfaces. Deserts have sparse vegetation, but there are some desert plants and animals that are specially adapted to survive in this harsh environment. Deserts often lack permanent streams, but may have intermittent streams or seasonal rivers.
Learn more about Deserts here:https://brainly.com/question/12556787
#SPJ11
what are the basic requirements for a terrestrial world to have a global magnetic field? what are the basic requirements for a terrestrial world to have a global magnetic field? a core that has a molten layer and a mantle that has convection
The basic requirements for a terrestrial world to have a global magnetic field are: A molten core, Convection in the mantle and A rotation.
A terrestrial globe must meet the following prerequisites in order to have a worldwide magnetic field:
The planet must have a metallic core that is molten and capable of producing electric currents. These electric currents' motion can create a magnetic field.Convection in the mantle: Convection, or the transfer of heat by the movement of material, is a necessary component of the planet's mantle. The magnetic field produced by the core can be maintained in part by the convection in the mantle.The planet must revolve around its axis. A stable global magnetic field can be created by the rotation by organising the magnetic field lines produced by the core.There may not be a global magnetic field on the planet if any of these conditions are not satisfied.
For such more question on magnetic:
https://brainly.com/question/30898946
#SPJ11
What patterns of climate change have scientists observed in the past?
Scientists observed climate change includes surface warming, changes in the atmosphere's temperature, rises in ocean heat content, rises in atmospheric moisture, sea level rise, and increasing melting of land and sea ice.
Since the late 19th century, the average surface temperature of the earth has grown by around 2 degrees Fahrenheit (1 degrees Celsius). This change is primarily attributable to rising atmospheric carbon dioxide emissions and other human activities.
The rate of glacier retreat throughout the globe, the intensity of rainfall events, variations in the timing of plant leafing out and the migration of migrant birds in the spring, and the shifting of some species' ranges are only a few of the physical and biological changes that confirm climate warming.
Learn more about climate change:
https://brainly.com/question/28779953
#SPJ4
Identify outcomes of metamorphic change. Choose one or more
A.growth of new minerals
B.changes in mineral size and shape
C.creation of foliation
D.phase change of minerals
growth of new minerals, changes in mineral size and shape ,creation of foliation ,phase change of minerals. All options are correct.
All of the listed outcomes can result from metamorphic change. Metamorphism is the process by which rocks are changed by heat, pressure, and/or chemical reactions, and this process can result in a variety of changes to the rock's mineralogy, texture, and structure. One common outcome of metamorphism is the growth of new minerals. This can occur when existing minerals in the rock recrystallize or when new minerals form as a result of chemical reactions between the rock and fluids that have infiltrated it.
Another outcome of metamorphism is changes in mineral size and shape. This can occur as a result of recrystallization or reorientation of mineral grains in response to the applied stresses of metamorphism. Foliation is a type of texture that develops in some metamorphic rocks as a result of the preferred orientation of mineral grains. This can occur when a rock is subjected to directional stress, which causes the mineral grains to align and form a planar fabric or "foliation". Finally, metamorphism can also result in phase changes of minerals, meaning that the mineral undergoes a transformation from one crystal structure to another. This can occur as a result of changes in temperature, pressure, or the presence of fluids that alter the chemical environment of the rock.
Learn more about mineral here:
https://brainly.com/question/18078524
#SPJ11
Carbon dioxide became trapped in Lake Nyos because the lake is ______.
Carbon dioxide became trapped in Lake Nyos because the lake is a deep crater lake formed by a volcanic eruption. The magma beneath the lake releases carbon dioxide which dissolves in the water creating a high concentration of dissolved carbon dioxide.
Normally, the carbon dioxide would slowly bubble to the surface and dissipate into the atmosphere. However, in Lake Nyos, the carbon dioxide became trapped under a layer of cold, dense water, preventing it from escaping. Over time, more and more carbon dioxide built up, eventually reaching a critical point where it suddenly erupted from the lake, causing a catastrophic event known as a limnic eruption. This released a massive cloud of carbon dioxide which suffocated over 1,700 people and thousands of livestock in nearby villages. To prevent a similar disaster from happening again, scientists have implemented measures to regularly release the gas from the lake to prevent an excessive buildup of content loaded carbon dioxide.
Learn more about Carbon dioxide here
https://brainly.com/question/25385913
#SPJ11
The 1991 Mount Pinatubo eruption featured massive _____ that were produced when Typhoon Yunya passed over the volcano, dumping heavy rainfall.
The 1991 Mount Pinatubo eruption featured massive lahars that were produced when Typhoon Yunya passed over the volcano, dumping heavy rainfall.
Lahars are a type of volcanic mudflow that can occur when heavy rainfall mixes with ash and other volcanic debris on the slopes of a volcano. During the Mount Pinatubo eruption, lahars were particularly devastating as they caused extensive damage to infrastructure and agriculture in surrounding areas, and also led to loss of life. In fact, lahars were responsible for the majority of the damage and fatalities caused by the eruption, highlighting their destructive power. The lahars from the Mount Pinatubo eruption were able to travel long distances and even made it to the ocean, which caused further problems such as fish kills and coastal erosion. Overall, the combination of the eruption and typhoon created a deadly mix of natural hazards that affected the Philippines and the surrounding region for years to come.
Know more about Mount Pinatubo here:
https://brainly.com/question/30448014
#SPJ11