Answer:
Approximately [tex]32.9^{\circ}[/tex].
Explanation:
When unpolarized light goes through a polarizing filter, intensity of the light would be reduced to [tex](1/2)[/tex] of the initial value. In this case, intensity of the light would be reduced to [tex]200\; {\rm W\cdot m^{-2}}[/tex] after entering the first filter.
Malus's Law models the intensity of the light after going through the second filter:
[tex]I_{1} = I_{0}\, \left(\cos(\theta)\right)^{2}[/tex],
Where:
[tex]I_{0} = 200\; {\rm W\cdot m^{-2}}}[/tex] is the intensity of the light before entering this polarizing filter.[tex]I_{1} = 141\; {\rm W\cdot m^{-2}}[/tex] is the intensity of the light after going through this filter.[tex]\theta[/tex] is the angle between the vertical axis of the filter and the plane of the incoming light.Note that in this question, after entering the first polarizing filter, the plane of light would be parallel to the vertical axis of the first filter. Hence, the angle [tex]\theta[/tex] would also be equal to the angle between the vertical axes of the two filters.
Rearrange this equation to find [tex]\theta[/tex]:
[tex]\displaystyle (\cos(\theta))^{2} = \frac{I_{1}}{I_{0}}[/tex].
[tex]\begin{aligned} \theta &= \arccos \sqrt{\frac{I_{1}}{I_{0}}} \\ &= \arccos \sqrt{\frac{141}{200}} \\ &\approx 32.9^{\circ}\end{aligned}[/tex].
A chef decides to test the best method to use to make the best pizza. He sets up an
experiment to find the solution to this problem.
Group A
Best PIZZA?
1. the cooking time
2. group B
3. the type of pizza crust
4. the method for cooking the pizza
5. group A
6. the type of toppings
7. the chef who cooked the pizza
Group B
pizzas cooked the same amount of time
the chef is the same
toppings on both are pepperoni and mushrooms
group A pizza is cooked in a brick fire oven
both pizzas have thick crust
the same person tosses both pizza crusts
group B pizza is cooked in a normal oven
a. variable
b. constant
c. control group
d. experimental group
Each of the numbered items is either a constant, a variable, an experimental group, or a
control group.
Working from 1 to 7, find the correct letter for each item.
The correct options based on the information will be:
variablecontrol groupvariablevariableexperimental groupvariablevariableHow to explain the experimentIn regards to this endeavor, a control group is one where variables are retained as a form of comparison against an experimental group that has alterations made.
As such, Group B serves as the untouched element here and remains unaltered in terms of culinarian, crust firmness, topping selection, and cooking duration, while Group A is the subject in question whose variable being tested is the variation in approaches for preparing their pizza (like brick-oven heating versus conventional ovens).
Learn more about variables on
https://brainly.com/question/28248724
#SPJ1
a diverging lens has a focal length of magnitude 15.2 cm. (a) locate the images for each of the following object distances. 30.4 cm distance cm location ---select--- 15.2 cm distance cm location ---select--- 7.6 cm distance cm location ---select--- (b) is the image for the object at distance 30.4 real or virtual? real virtual is the image for the object at distance 15.2 real or virtual? real virtual is the image for the object at distance 7.6 real or virtual? real virtual (c) is the image for the object at distance 30.4 upright or inverted? upright inverted is the image for the object at distance 15.2 upright or inverted? upright inverted is the image for the object at distance 7.6 upright or inverted? upright inverted (d) find the magnification for the object at distance 30.4 cm. find the magnification for the object at distance 15.2 cm. find the magnification for the object at distance 7.6 cm.
(a) The images will be located at 22.8 cm behind the lens, (b) the third object's image is virtual, (c) the distance of third object is 7.6 cm and (d) the magnification is -3 hence, image is real and enlarged.
The images which have a positive distance will give positive and real images from diverging lenses and the images that have negative distances will give virtual images. The focal length of magnitude = 15.2 cm
(a) To find the images for each object distance,
1/f = 1/do + 1/di
The first object distance = 30.4 cm
1/15.2 = 1/30.4 + 1/di
di = 22.8 cm
The image is located 22.8 cm away from the lens for an object which has a distance of 30.4 cm. The second object distance = 15.2 cm:
1/15.2 = 1/15.2 + 1/di
di = infinity
The third object distance = 7.6 cm
1/15.2 = 1/7.6 + 1/di
di = -22.8 cm
The image is located 22.8 cm behind the lens.
(b) The first object's distance of 30.4 cm, di = 22.8 cm. It is positive, so the image is real. The second object's distance of 15.2 cm, di = infinity. It is not a finite value, so the image is virtual. The third object's distance of 7.6 cm, di = -22.8 cm. It is negative, so the image is virtual.
(c) For the first object distance = 30.4 cm, The image is inverted. For the second object distance = 15.2 cm, the image is virtual and upright. For the third object distance = 7.6 cm, the image is virtual and upright.
(d) For the first object distance of 30.4 cm:
magnification = -22.8 cm / 30.4 cm = -0.75. The image is smaller than the object and inverted. For the second object distance of 15.2 cm:
m = -infinity / 15.2 cm = 0. The magnification is 0. The image is the same size as the object. For the third object distance of 7.6 cm:
m = -22.8 cm / 7.6 cm = -3
The magnification is -3. The image is larger than the object and inverted.
To learn more about Magnification
brainly.com/question/29356454
#SPJ4
The images formed by a diverging lens are virtual, upright, and located at a distance equal to twice the focal length.
Are the images produced by a diverging lens real or virtual?Diverging lenses have a negative focal length, which means they always form virtual images. The magnitude of the focal length represents the distance at which the virtual image is formed. For an object placed at a distance of 30.4 cm from a diverging lens with a focal length of 15.2 cm, the virtual image is formed at a distance of 15.2 cm on the same side as the object. Similarly, for an object placed at a distance of 15.2 cm or 7.6 cm from the lens, the virtual images are formed at distances of 30.4 cm and 45.6 cm, respectively. The virtual images formed by a diverging lens are always upright, indicating that they have the same orientation as the object.
Learn more about Diverging Lens
brainly.com/question/28348284
#SPJ11
In Bohr's model of a Hyodrogen atom, electrons move in orbits labeled by the quantum number n. Randomized Variables Find the radius, in meters of the orbit of an electron around a Hydrogen atom in the n = 4 state according to Bohr's theory. E sin cos taní) cotan asino acos atan acotan sinho cosho tanho cotanho Degrees O Radians 78 9 456 1 2 3 0 VODARICA +. 0
The radius, in meters of the orbit of an electron around a Hydrogen atom in the n = 4 state according to Bohr's theory is 5.29 x [tex]10^{-11}[/tex] m.
The radius of the orbit of an electron around a Hydrogen atom in the n = 4 state according to Bohr's theory can be found using the formula:
r = (n² × h² × ε0) / (π × m × e²)
where:
n = 4 (quantum number)
h = Planck's constant = 6.626 x [tex]10^{-34}[/tex] Js
ε0 = permittivity of free space = 8.85 x [tex]10^{-12}[/tex] C²/Nm²
m = mass of electron = 9.109 x [tex]10^{-31}[/tex] kg
e = elementary charge = 1.602 x [tex]10^{-19}[/tex] C
Plugging in the values, we get:
r = (4² × (6.626 x [tex]10^{-34}[/tex])² × 8.85 x [tex]10^{-12}[/tex]) / (π × 9.109 x [tex]10^{-31}[/tex] × (1.602 x [tex]10^{-19}[/tex])²)
r = 5.29 x [tex]10^{-11}[/tex] m
Learn more about Bohr's theory at
https://brainly.com/question/11111348
#SPJ4
The question is -
In Bohr's model of a Hydrogen atom, electrons move in orbits labeled by the quantum number n.
Randomized Variables,
Find the radius, in meters of the orbit of an electron around a Hydrogen atom in the n = 4 state according to Bohr's theory.
Sketch the curve with the given vector equation. Indicate with an arrow the direction in which t� increases.
r(t)=⟨t2−1,t⟩
The curve with the given vector equation r(t) = ⟨[tex]t^2 - 1, t[/tex]⟩ is a parabola that opens to the right, and the arrow indicating the direction of increasing t points to the right.
To sketch the curve with the given vector equation r(t) = ⟨[tex]t^2 - 1, t[/tex]⟩, we can plot points for various values of t. For example, when t = 0, r(0) = ⟨-1, 0⟩; when t = 1, r(1) = ⟨0, 1⟩; when t = -1, r(-1) = ⟨0, -1⟩. We can continue to plot points for other values of t and connect them to form a smooth curve.
To indicate the direction in which t increases, we can draw an arrow along the curve that points in the direction of increasing t. In this case, we can see that as t increases, the curve moves to the right, so the arrow should point to the right.
*
|
|
*------*------*
|
|
*
The arrow indicating the direction in which t increases can be drawn tangent to the curve at any point, such as the point (0, -1) where t = -1. This arrow would point to the right, since t increases as we move from left to right along the curve.
Hence, the given vector equation has a curve which is parabolic in nature.
For more such questions on Vector equation.
https://brainly.com/question/30794008#
#SPJ11
The horizontal beam in (Figure 1) weighs 190 N. and its center of gravity is at its center. a) Find the tension in the cable. Express your answer to three significant figures and include the appropriate unitsb) Find the horizontal component of the force exerted on the beam at the wall. Express your answer to three significant figures and include the appropriate unitsc) Find the vertical component of the force exerted on the beam at the wall. Express your answer to three significant figures and include the appropriate units
The answers are a) Tension in cable = 285 N b) Horizontal component of force at wall = 190 N
c) Vertical component of force at wall = 95 N
To solve this problem, we need to use the principles of static equilibrium, which state that the sum of all forces acting on an object must be equal to zero, and the sum of all torques (or moments) about any point must also be equal to zero.
a) Let's consider the forces acting on the beam. We have the weight of the beam acting downwards (190 N), the tension in the cable pulling upwards, and the force exerted on the beam at the wall. Since the beam is not moving, the sum of these forces must be zero. Therefore:
Tension in cable - force at wall = 190 N
Since the center of gravity of the beam is at its center, the force at the wall acts horizontally and has no vertical component. Therefore, the tension in the cable is equal in magnitude to the force at the wall. Solving for the tension, we get:
Tension in cable = force at wall + 190 N
b)torque = force x distance = F_h x L/2
where L is the length of the beam. This torque must be balanced by an equal and opposite torque created by the weight of the beam, which acts downwards at a distance L/2 from the center of gravity. Therefore:
torque due to weight = weight x distance = 190 N x L/2
Since the torques must be equal, we can set these two expressions equal to each other and solve for the horizontal component of the force at the wall:
F_h = (190 N x L/2) / (L/2) = 190 N
c) torque due to weight = weight x distance = 190 N x L/4
The tension in the cable also creates a torque about point P, since it acts at a distance L/2 from this point. The torque due to tension is:
torque due to tension = tension x distance = Tension x L/2
The horizontal component of the force at the wall does not create any torque about point P, since its line of action passes through this point. Therefore, the sum of torques about point P must be equal to zero. This gives us:
Tension x L/2 - 190 N x L/4 = 0
Solving for the tension, we get:
Tension in cable = 95 N
Therefore, the vertical component of the force at the wall is:
F_v = 190 N - 95 N = 95 N
Learn more about torque here:
https://brainly.com/question/29024338
#SPJ11
Planet 9 is hypothesized to be located at a distance of 560AU from the Sun. What is such a planets orbital period in Earth years? (choose the answer closest to yours). a. 1 year b. 13,252 yearsc. 68 years d. 1325 years
The orbital period of Planet 9 at a distance of 560 AU from the Sun is approximately 13,252 years. The correct answer is option b.
To calculate the orbital period of a planet, we use Kepler's Third Law, which states that the square of the orbital period (P) of a planet is proportional to the cube of its average distance from the Sun (r).
So, P² ∝ r³
We can rewrite this equation as P = √(r³) = r^(3/2)
Substituting the values, we get P = (560 AU)^(3/2) = 13,252 years.
Therefore, the orbital period of Planet 9 is approximately 13,252 years.
It's worth noting that Planet 9 is a hypothetical planet, and its existence has not yet been confirmed. Its presence has been inferred based on the unusual orbits of some trans-Neptunian objects in our solar system.
Further observations are needed to confirm its existence and determine its properties accurately.
To know more about orbital period, refer here:
https://brainly.com/question/14494804#
#SPJ11
What does it mean when work is positive?
a. Velocity is greater than kinetic energy.
b. Kinetic energy is greater than velocity.
c. The environment did work on an object.
d. An object did work on the environment.
Answer:
When work is positive, it means that an external force did work on the object and transferred energy to it. This means that the object gained energy as a result of the work done on it, and its potential energy or kinetic energy increased. Option d, "An object did work on the environment," is not an accurate definition of positive work, as this would be negative work since the object is losing energy and doing work on the environment. Therefore, the correct answer is:
c. The environment did work on an object.
Explanation:
For an LC circuit, when the charge on the capacitor is one-half of the maximum charge, the energy stored in the capacitor is one-half of the total energy. twice the total energy. equal to the total energy. one-eighth of the total energy. one-quarter of the total energy.
When an LC circuit reaches its maximum charge, the capacitor stores energy. If the charge on the capacitor is one-half of the maximum charge, then the energy stored in the capacitor is also one-half of the total energy.
This is because the energy stored in the capacitor is proportional to the square of the charge. Therefore, if the charge is reduced by half, the energy stored will also be reduced by a factor of 4 (0.5^2).
This means that the energy stored in the inductor will also be reduced by the same factor, resulting in a total energy that is one-half of the maximum energy.
It is important to note that this relationship holds true for ideal LC circuits, which do not account for energy losses due to resistance or other external factors.
In practical applications, the actual energy stored may differ slightly from the theoretical calculations.
To know more about LC circuit refer here:
https://brainly.com/question/31386567#
#SPJ11
Question 24 A parallel plate capacitor with plate area A and plate separation D has a material between its plates with dielectric constant k = 2. When this capacitor is isolated and fully charged, the energy stored in the capacitor is 20J. The material is slowly removed from between the plates. After the material is removed, the energy stored in the capacitoris (A) 103 160
The energy stored in the capacitor after the dielectric material is removed is 40 J.
U = 1/2 * C * V²
20 J = 1/2 * C * V²
C = (k * ε0 * A) / D
The new energy stored in the capacitor is:
U' = 1/2 * C' * V²
U' = 1/2 * (k * ε0 * A) / D * V²
U' / U = C' / C = k
Substituting the values of k = 2 and U = 20 J, we get:
U' = k * U = 2 * 20 J = 40 J
A capacitor is a fundamental component of electrical circuits that stores electrical energy in an electric field. It is made up of two conductive plates separated by an insulating material called a dielectric. When a voltage difference is applied to the plates, an electric field is created between them, which causes electrons to accumulate on one plate and leave the other plate with a positive charge. This separation of charge results in the storage of electrical energy in the capacitor.
The amount of charge a capacitor can store is determined by its capacitance, which is measured in Farads. Capacitance depends on the size of the plates, the distance between them, and the type of dielectric material used. Capacitors are used in a wide range of applications, including power supply filters, tuning circuits, and signal coupling. They can also be used to store energy for brief periods in electronic flash units, camera strobes, and defibrillators.
To learn more about Capacitor visit here:
brainly.com/question/31627158
#SPJ4
relative to previous generations, voters who entered the electorate during and just after the great depression were more likely to identify as
Voters who entered the electorate during and just after the Great Depression were more likely to identify as Democrats.
This was largely due to the policies and actions of President Franklin D. Roosevelt and the Democratic Party during the New Deal era, which included programs aimed at providing relief, recovery, and reform to the American people in the aftermath of the Great Depression.
The New Deal programs, such as the Civilian Conservation Corps, the Works Progress Administration, and Social Security, helped to create jobs, improve infrastructure, and provide a social safety net for those in need. These policies resonated with many Americans who had been struggling during the Great Depression and who were looking for a government that would take action to help them.
As a result, the Democratic Party saw a surge in support during this time period, with many voters identifying as Democrats and supporting the party's policies. This trend continued through subsequent generations, with many Americans continuing to identify as Democrats due to their perception of the party as being more aligned with policies aimed at helping the middle and working classes.
Learn more about Democrats at
brainly.com/question/14320124
#SPJ4
calculate the temperature for which the minimum escape energy is 12 times the average kinetic energy of an oxygen molecule. answer in units of k.
The temperature for which the minimum escape energy is 12 times the average kinetic energy of an oxygen molecule is 444.44 K (in units of kelvin).
To begin with, let's define the terms escape energy, kinetic energy, and temperature:
Escape energy: The minimum amount of energy required for a particle to escape from the gravitational field of a planet or other celestial body.
Kinetic energy: The energy an object possesses due to its motion.
Temperature: A measure of the average kinetic energy of the particles in a system.
Now, we know that the minimum escape energy (Eesc) is 12 times the average kinetic energy (Ekin) of an oxygen molecule:
Eesc = 12 Ekin
We also know that the average kinetic energy of a molecule is related to its temperature (T) by the equation:
Ekin = (3/2) kT
where k is the Boltzmann constant.
Substituting this equation into the first one, we get:
Eesc = 12 (3/2) kT
Simplifying, we get:
Eesc = 18 kT
Finally, we can solve for the temperature (T):
T = \frac{Eesc }{(18 k)}
Plugging in the values of Eesc and k, we get:
T = \frac{(12 times the average kinetic energy of an oxygen molecule) }{ (18 * 1.38 * 10^{-23} J/K)}
T = 444.44 K
Hence, the temperature for which the minimum escape energy is 12 times the average kinetic energy of an oxygen molecule is 444.44 K (in units of kelvin).
learn more about kinetic energy Refer: https://brainly.com/question/29552176
#SPJ11
Which of these is a direct result of gravity?
A. Your weight
B. Your height
C. Your mass
D. Your volume
A. Your weight
the weight makes it go down and the result of gravity or (w = m * g
an electromagnet is a coil of wire with a current running through it. this creates an electromagnetic field. an additional magnet and its poles interact with the electromagnet, causing an electromagnetic motor to turn. what are some ways you could make an electromagnetic motor stronger, and how could you apply these principles to everyday life? in three to five sentences, explain this phenomenon in real life and hypothesize about how you could strengthen it.(4 points)
An electromagnet is a coil of wire with a current running through it, creating an electromagnetic field. This field interacts with the poles of an additional magnet, causing an electromagnetic motor to turn.
To make an electromagnetic motor stronger, you could increase the current flowing through the coil, use more turns of wire in the coil, or use a stronger magnet.
In everyday life, this phenomenon can be seen in electric motors used in appliances, vehicles, and industrial machinery. To strengthen the electromagnetic force in these motors, one could hypothesize increasing the power supply to the coil, using better conducting materials, or incorporating stronger permanent magnets to enhance the overall efficiency and performance of the motor.
To know more about the electromagnet refer here :
https://brainly.com/question/17057080#
#SPJ11
given that the focal length of the eyepiece is 2.5 cm , and the focal length of the objective is 0.49 cm , find the magnitude of the angle subtended by the red blood cell when viewed through this microscope.
The magnitude of the angle subtended by the red blood cell when viewed through this microscope is approximately 1 x 10^-6 radians.
The magnification of a microscope is given by the ratio of the focal length of the objective lens to the focal length of the eyepiece:
M = [tex]fo / fe[/tex]
where M is the magnification, fo is the focal length of the objective lens, and fe is the focal length of the eyepiece.
To determine the angle subtended by the red blood cell when viewed through the microscope, we can use the formula:
θ = d / f
where θ is the angle subtended by the object, d is the diameter of the object, and f is the focal length of the objective lens.
Assuming that the diameter of a red blood cell is 8 µm, we can calculate the angle subtended by the cell as follows:
θ = [tex](8 µm) / (0.49 cm) = 1.63 x 10^-5 radians[/tex]
Now, we can use the magnification of the microscope to find the angle subtended by the cell when viewed through the eyepiece:
θ' = [tex]Mθ = (fo / fe)θ[/tex]
Substituting the given values, we get:
θ' =[tex](0.49 cm / 2.5 cm) x 1.63 x 10^-5 radians ≈ 1 x 10^-6 radians[/tex]
Therefore, the magnitude of the angle subtended by the red blood cell when viewed through this microscope is approximately [tex]1 x 10^-6[/tex] radians.
To know more about microscope, visit:
https://brainly.com/question/18661784#
#SPJ11
An ice skater is going into a spin. To simplify the system, the skater’s body (legs, torso, head) has a moment of inertia of 1.719kgm^2. Each hand-arm can be modeled as a point of mass of 5.0kg. At the beginning of the spin, the masses are rotating at 0.50m/s with their arms extended so that the center of mass of the hand-arm is 0.60m from the axis of rotation. For the finale, the skater pulls their arm inward so that the hand-arm is 0.20m from the axis of rotation. What is the angular velocity of the skater during the finale?
The angular velocity of the skater during the finale is 2.18 rad/s.
The conservation of angular momentum is a principle in physics that states that the total angular momentum of a system remains constant if no external torques act on the system. Mathematically, this can be expressed as L1 = L2, where L1 is the initial angular momentum of a system, L2 is the final angular momentum of the system, and the total torque acting on the system is zero. This principle is analogous to the conservation of linear momentum, which states that the total linear momentum of a system remains constant if no external forces act on the system. The conservation of angular momentum is an important principle in many areas of physics, including mechanics, electromagnetism, and quantum mechanics.
We can use the conservation of angular momentum to solve this problem. The initial angular momentum of the skater and the hand-arms is given by:
L1 = I1 * w1
where I1 is the moment of inertia of the skater's body, and w1 is the initial angular velocity. Since the hand-arms are extended, their moment of inertia can be neglected.
When the skater pulls their arms inward, the moment of inertia of the system decreases. The final moment of inertia is given by:
I2 = I1 + 2md^2
where m is the mass of each hand-arm, d is the distance of the hand-arm from the axis of rotation, and we multiply by 2 since there are two hand-arms.
The final angular velocity w2 can be found by equating the initial and final angular momentum:
L1 = I1 * w1 = I2 * w2
Substituting the expressions for I1, I2, and simplifying, we get:
w2 = w1 * I1 / (I1 + 2m(d2^2 - d1^2))
where d1 is the initial distance of the hand-arm from the axis of rotation (0.60 m), and d2 is the final distance of the hand-arm from the axis of rotation (0.20 m).
Substituting the given values, we get:
w2 = 0.50 m/s * 1.719 kgm^2 / (1.719 kgm^2 + 2 * 5.0 kg * (0.20 m^2 - 0.60 m^2))
w2 = 2.18 rad/s
Therefore, The skater's angular velocity during the grand finale is 2.18 rad/s.
To learn more about momentum and impulse equations click:
brainly.com/question/30101966
#SPJ1
the 5-lb block is released from rest at a and slides down the smooth circular surface ab. it then continues to slide along the horizontal rough surface until it strikes the spring. determine how far it compresses the spring before slopping.
The block compresses the spring by 5.7 cm before coming to a stop.
To solve this problem, we need to use conservation of energy.
First, let's find the potential energy of the block at point A.
Since it is released from rest, its initial velocity is zero, so all of its energy is in the form of potential energy:
PE(A) = mgh = (5 lbs) * (32.2 ft/s²) * (1 ft) = 161 J
Next, let's find the kinetic energy of the block at point B.
Since it slides down a smooth surface, there is no friction to do work on the block, so its potential energy at point A is converted entirely into kinetic energy at point B:
KE(B) = PE(A) = 161 J
Now the block slides along a rough surface, so some of its kinetic energy will be converted into thermal energy due to friction.
Let's assume that the block comes to a stop at point C, where it compresses the spring.
At this point, all of the block's kinetic energy has been converted into potential energy in the spring:
PE(C) = KE(B) = 161 J
The potential energy stored in the spring is given by:
PE(spring) = (1/2)kx²
where k is the spring constant and x is the distance the spring is compressed. Since we know the potential energy stored in the spring and the spring constant, we can solve for x:
161 J = (1/2)kx²
x² = 322 J/k
x = √(322 J/k)
Now we just need to know the spring constant.
Let's assume the spring is ideal (i.e. it obeys Hooke's law) and has a spring constant of k = 100 N/m. Then:
x = √(322 J/100 N/m) = 5.7 cm
Learn more about kinetic energy:
https://brainly.com/question/8101588
#SPJ11
A moon that goes inside the Roche Limit will:A) get heated by the strong magnetic fields.B) collide with a major satellite.C) escape its planet's gravity.D) be torn apart by the planet's tidal forces.E) become a planet.
A moon that goes inside the Roche Limit will be torn apart by the planet's tidal forces. The correct answer is option D).
The Roche Limit is the minimum distance at which a celestial body, such as a moon, can approach another body without being pulled apart by tidal forces. If a moon goes inside the Roche Limit of its planet, the gravitational forces between the two bodies will exceed the moon's self-gravity and it will be torn apart by the planet's tidal forces.
This is due to the difference in gravitational pull on different parts of the moon, causing it to stretch and eventually break apart. If a moon goes inside the Roche Limit, the gravitational forces acting on it become stronger than the internal forces holding it together, and it will be torn apart by the planet's tidal forces.
Therefore, option D is the correct answer.
Learn more about 'gravitation':
https://brainly.com/question/31689346
#SPJ11
LetK_Abe the magnitude of the kinetic energy of puck A at the instant it reaches the finish line. Similarly,K_Bis the magnitude of the kinetic energy of puck B at the (possibly different) instant it reaches the finish line. Which of the following statements is true?Let be the magnitude of the kinetic energy of puck A at the instant it reaches the finish line. Similarly, is the magnitude of the kinetic energy of puck B at the (possibly different) instant it reaches the finish line. Which of the following statements is true?K_A = K_BK_A < K_BK_A > K_BYou need more information to decide.
Hi, to answer your question regarding the comparison of the magnitudes of kinetic energy (K_A and K_B) of puck A and puck B when they reach the finish line, we need to consider the following steps:
1. Kinetic energy is defined as KE = 0.5 * m * v^2, where m is the mass of the object, and v is its velocity.
2. In order to compare K_A and K_B, we need to know the masses and velocities of both pucks A and B at the instant they reach the finish line.
Since the question does not provide any information about the masses and velocities of the pucks, we cannot determine whether K_A is equal to, greater than, or less than K_B. Therefore, the correct answer is: "You need more information to decide."
#SPJ11
Kinetic Energy:https://brainly.com/question/8101588
A car starts from rest and has a uniform acceleration of 2m/s. find the speed of the car after 5seconds
Answer: The velocity of the car after 5 seconds is 10 m/s
Explanation: The formula for finding final velocity is
v = u + at.
Where v is final velocity, u is initial velocity, a is acceleration, and t is time.
Convert the following to equivalent temperatures on the Celsius and Kelvin scales: (a) the normal human body temperature, 98.6âF; (b) the air temperature on a cold day, â5.00âF.
The equivalent temperatures on the Celsius and Kelvin scales are (a) the normal human body temperature is 310.15 Kelvin and (b) the air temperature on a cold day is 252.32 Kelvin.
(a) To convert the body temperature from Fahrenheit to Celsius, we use the formula: C = (5/9) * (F - 32), where C is the temperature in Celsius and F is the temperature in Fahrenheit. Plugging in 98.6 for F, we get:C = (5/9) * (98.6 - 32) = 37.0So, the normal human body temperature is 37.0 degrees Celsius.To convert the body temperature from Celsius to Kelvin, we simply add 273.15 to the Celsius temperature. Thus:K = 37.0 + 273.15 = 310.15So, the normal human body temperature is 310.15 Kelvin.(b) To convert the air temperature on a cold day from Fahrenheit to Celsius, we use the same formula as before. Plugging in -5.00 for F, we get:C = (5/9) * (-5.00 - 32) = -20.83So, the air temperature on a cold day is -20.83 degrees Celsius.To convert the air temperature on a cold day from Celsius to Kelvin, we simply add 273.15 to the Celsius temperature. Thus:K = -20.83 + 273.15 = 252.32So, the air temperature on a cold day is 252.32 Kelvin.For more such question on temperatures
https://brainly.com/question/27944554
#SPJ11
please help i give brainliest
The unknown force acting on the object is 20 N, The correct is option D.
Newton's Second Law of Motion states that the acceleration of an object is directly proportional to the net force acting on it and inversely proportional to its mass. In equation form, it can be written as F_net = m*a, where F_net is the net force acting on the object, m is its mass, and a is its acceleration.
To determine the unknown force acting on the object, we need to apply Newton's Second Law of Motion, which states that the net force acting on an object is equal to its mass times its acceleration:
F_net = m*a
where F_net is the net force acting on the object, m is its mass, and a is its acceleration.
In this case, we know the mass of the object is 3.0 kg and its acceleration is 1.5 m/s² to the right. To find the net force acting on the object, we need to add up all the forces acting on it.
From the free body diagram, we see that the forces acting on the object are:
Top: 35 N (pointing downward)
Right: 25 N (pointing to the right)
Bottom: 35 N (pointing upward)
Left: unknown force (pointing to the left)
To find the net force acting on the object, we can add up the forces along the x-axis and y-axis separately:
Net force along x-axis: F_net,x = F_right - F_left
where F_right is the force pointing to the right (25 N) and F_left is the unknown force pointing to the left.
Since the object is accelerating to the right, we know that the net force along the x-axis must be positive. So we have:
F_net,x = F_right - F_left = m*a
25 N - F_left = (3.0 kg)*(1.5 m/s²)
F_left = 20 N
Therefore, the unknown force acting on the object is 20 N, which is option D.
To learn more about Newton's law of motion click:
brainly.com/question/29775827
#SPJ1
I need help with my physics homework
A carousel—a horizontal rotating platform—of radius 5 m is initially at rest, and then begins to accelerate constantly until it has reached an angular velocity of 20 rad/s after 2 complete revolutions.
A.) How many radians did the carousel rotate through?
B.) What is the tangential velocity of the carousel at a point 2 m from the center of the carousel?
C.) What is the angular acceleration of the carousel during this time?
D.) What is the tangential acceleration of the carousel at a point on the outside of the platform at this time?
A) 4π radians did the carousel rotate through.
B) v=rω, v =2*20 = 40 m/s is the tangential velocity of the carousel at a point 2 m from the center of the carousel.
C) α =ω²r = 20²× 5 = 2000 rad/s² is the angular acceleration of the carousel during this time.
D) the tangential acceleration of the carousel at a point on the outside of the platform is zero cause a(t) = r dω/dt change in angular velocity is zero after it reaches 20 rad/s.
A carousel, also known as a merry-go-round (international), roundabout (British English), or hurdy-gurdy (an archaic phrase in Australian English), is a type of amusement attraction that consists of a spinning circular platform with seats for passengers. Traditional "seats" are rows of wooden horses or other animals set on poles, many of which are moved up and down by gears to mimic galloping to the tune of looping circus music. carousel rotates with a particular velocity.
To know more about carousel :
https://brainly.com/question/27088541
#SPJ1.
A wire bent into a semicircle of radius R lies in a plane that is perpendicular to a uniform external magnetic field B⃗ .a) If the wire carries a current I, what are the magnitude of the magnetic force exerted by the external field on the wire? b) What is the direction of the magnetic force? a. The direction of the force is opposite to the direction of the magnetic field. b. The force is perpendicular to the direction of the magnetic field and the diameter connecting the ends of the wire. If the direction of the current and the direction of the magnetic field satisfy the right-hand rule, that is when you curl the fingers of your right hand along the direction of the current, your outstretched thumb points in the direction of the magnetic field, then the force is directed toward the wire. If the directions of the current and the magnetic field do not satisfy the right-hand rule, than the force is directed outward from the wire. c. The force is directed from the end of the wire where the current leaves the semicircle to the end of the wire where the current enters the semicircle. d. The force is directed from the end of the wire where the current enters the semicircle to the end of the wire where the current leaves the semicircle. e. The direction of the force is the same as the direction of the magnetic field. f. The force is perpendicular to the direction of the magnetic field and the diameter connecting the ends of the wire. If the direction of the current and the direction of the magnetic field satisfy the right-hand rule, that is when you curl the fingers of your right hand along the direction of the current, your outstretched thumb points in the direction of the magnetic field, then the force is directed outward from the wire. If the directions of the current and the magnetic field do not satisfy the right-hand rule, than the force is directed toward the wire.
a) The magnitude of the magnetic force exerted by the external field on the wire is given by F = (I * B * R), where I is the current flowing through the wire, B is the magnitude of the magnetic field, and R is the radius of the semicircle wire.
b) The direction of the magnetic force is perpendicular to the direction of the magnetic field and the diameter connecting the ends of the wire.
If the direction of the current and the direction of the magnetic field satisfy the right-hand rule, where you curl the fingers of your right hand along the direction of the current and your outstretched thumb points in the direction of the magnetic field, then the force is directed outward from the wire. If the directions of the current and the magnetic field do not satisfy the right-hand rule, then the force is directed toward the wire.
c) The force is directed from the end of the wire where the current leaves the semicircle to the end of the wire where the current enters the semicircle.
a) The magnitude of the magnetic force on a current-carrying wire in a magnetic field is given by the formula F = (I * B * L), where I is the current, B is the magnetic field, and L is the length of the wire segment in the magnetic field.
In this case, the wire is bent into a semicircle of radius R, so the length of the wire segment in the magnetic field is equal to the circumference of the semicircle, which is 2πR. Therefore, the magnitude of the magnetic force on the wire is F = (I * B * 2πR).
b) The direction of the magnetic force on a current-carrying wire is given by the right-hand rule. If you curl the fingers of your right hand along the direction of the current, your outstretched thumb points in the direction of the magnetic field.
According to the right-hand rule, the magnetic force on the wire is perpendicular to the direction of the magnetic field and the diameter connecting the ends of the wire. If the current and the magnetic field satisfy the right-hand rule, then the force is directed outward from the wire, which is opposite to the direction of the magnetic field.
c) According to the right-hand rule, the force is directed from the end of the wire where the current leaves the semicircle to the end of the wire where the current enters the semicircle. This is because the magnetic force acts perpendicular to the direction of the magnetic field and the diameter connecting the ends of the wire.
The force tends to push the wire away from the magnetic field, causing the current-carrying wire to experience a net force in the direction from where the current leaves the semicircle to where the current enters the semicircle.
To know more about right-hand rule refer here:
https://brainly.com/question/9750730#
#SPJ11
using your kst value, what would the displacement from equilibrium be if you hung a 0.5 kg mass from the spring? include uncertainty.
kstat: 8.37+/-0.1
The displacement from equilibrium when hanging a 0.5 kg mass from the spring is -0.585 +/- 0.007 m. The displacement from equilibrium when hanging a 0.5 kg mass from the spring can be calculated using Hooke's Law, which states that the force exerted by a spring is directly proportional to its displacement from equilibrium.
The equation for Hooke's Law is F = -kx, where F is the force applied, k is the spring constant, and x is the displacement from equilibrium.
To find the displacement, we can rearrange the equation to x = -F/k. In this case, the force applied is the weight of the mass, which can be calculated as F = mg, where m is the mass and g is the acceleration due to gravity (9.81 m/s^2). Therefore, F = 0.5 kg x 9.81 m/s^2 = 4.905 N.
Substituting the values into the equation, we get x = -4.905 N / 8.37 N/m = -0.585 m. However, we must take into account the uncertainty in the spring constant. The uncertainty in the displacement can be calculated using the formula Δx = |x| x (Δk/k), where Δk/k is the relative uncertainty in the spring constant.
In this case, the relative uncertainty is 0.1/8.37 = 0.012, so the uncertainty in the displacement is Δx = 0.585 m x 0.012 = 0.007 m. Therefore, the displacement from equilibrium when hanging a 0.5 kg mass from the spring is -0.585 +/- 0.007 m.
learn more about Hooke's Law, here: brainly.com/question/24637789
#SPJ11
Power is measured in
A) amps
B) volts
C) ohms
D) siemens/cm
E) watts
The Power is measured in E) watts. In electrical systems, power (P) represents the rate at which electrical energy is converted to another form, such as mechanical or thermal energy. The unit for power is the watt (W), named after the Scottish engineer James Watt.
To calculate electrical power, you can use the formula P = V * I where P represents power in watts, V is the voltage (in volts), and I is the current in amperes or amps. By knowing the voltage and current in a circuit, you can determine the power being consumed or generated. The other options in your question represent different electrical quantities A) amps - Amperes (A) are the units for measuring electric current. B) volts - Volts (V) are the units for measuring electric potential difference or voltage. C) ohms - Ohms (Ω) are the units for measuring electrical resistance. D) siemens/cm - Siemens per centimeter (S/cm) is a unit for measuring electrical conductivity. To summarize, power in electrical systems is measured in watts (W), which is the rate of converting electrical energy into other forms.
learn more about watts here.
https://brainly.com/question/29034284
#SPJ11
An earthquake wave is traveling from west to east through rock. If the particles of the rock are vibrating in a north-south direction, the wave must be...
A: transverse
B: longitudinal
C: a microwave
D: a radiowave
Answer:The earthquake wave must be B: longitudinal.
Explanation:In a transverse wave, particles vibrate perpendicular to the direction of wave propagation, forming crests and troughs.
In a longitudinal wave, particles vibrate parallel to the direction of wave propagation, forming compressions and rarefactions.
Since the particles of the rock are vibrating in a north-south direction, which is parallel to the direction of wave propagation from west to east, the wave must be a longitudinal wave.
An astronaut of mass m is launched from the surface of the moon in a space craft having an initial vertical acceleration of 5g, where g' is the acceleration of free fall in moon. The vertical reaction of the space craft on the astronaut is
The vertical reaction of the space craft on the astronaut is 5mg.
What is the vertical reaction of the space craft on the astronaut?The vertical reaction of the space craft on the astronaut is calculated by applying Newton's second law of motion as shown below.
F = mg
where;
m is the mass of the astronautg is acceleration due to gravity on moon = 1.67 m/s²The vertical reaction of the space craft on the astronaut is calculated as;
F = m x 5g
F = 5mg
Thus, the vertical reaction of the space craft on the astronaut is equal to the weight of the astronaut exerted downwards.
Learn more about vertical reaction here: https://brainly.com/question/19260256
#SPJ1
A bicycle wheel of radius 40. 0 cm and angular velocity of 10. 0 rad/s starts accelerating at 80. 0 rad/s2. What is the tangential acceleration of the wheel at this time point?
Therefore, the tangential acceleration of the wheel at this time point is [tex]32.0 m/s^2.[/tex]
We can use the formula for tangential acceleration:
[tex]a_t = r * \alpha[/tex]
Here a_t is the tangential acceleration, r is the radius of the wheel, and α is the angular acceleration.
r = 40.0 cm = 0.4 m
α = 80.0 [tex]rad/s^2[/tex]
initial angular velocity, [tex]w_i[/tex]= 10.0 rad/s
We need to find the tangential acceleration, [tex]a_t[/tex].
First, we can find the final angular velocity, [tex]w_f[/tex], using the formula:
[tex]w_f = w_i + \alpha * t[/tex]
Here t is the time for which the wheel accelerates.
To find the time t, we can use the formula for angular displacement:
θ [tex]= w_i * t + 0.5 * \alpha * t^2[/tex]
Since the wheel starts from rest (initial angular velocity is given as 10.0 rad/s) and the angular displacement is not given, we assume that the initial angular displacement is zero, so that
θ = 0.5 * α * [tex]t^2[/tex]
Solving for t, we get:
t = [tex]\sqrt{ ((2 * pi) / 80}[/tex]
θ = 2π radians (one complete revolution)
Now, we can find the final angular velocity,[tex]w_f:[/tex]
[tex]w_f = w_i[/tex] + α * t = 10.0 + 80.0 * 0.2827 = 32.22 rad/s
Finally, we can find the tangential acceleration:
[tex]a_t[/tex] = r * α = 0.4 * 80.0 = 32.0 [tex]m/s^2[/tex]
Learn more about tangential acceleration visit: brainly.com/question/11476496
#SPJ4
When the spring on a toy gun is compressed by a distance x, it will shoot a rubber ball straight up to a height of h. Neglecting air resistance, how high will the gun shoot the same rubber ball of the spring is compressed by an amount 3x? assume x << h.
The rubber ball will reach a height that is 27 times higher if the spring is compressed by 3x compared to when it is compressed by x.
Assuming that the spring follows Hooke's law and that the only force acting on the rubber ball is the force of the compressed spring, we can use the principle of conservation of energy to find the height the rubber ball will reach when the spring is compressed by 3x.When the spring is compressed by x, it stores potential energy given by:PE = (1/2)kx^2where k is the spring constant.When the spring is released, this potential energy is converted into kinetic energy:KE = (1/2)mv^2where m is the mass of the rubber ball and v is its velocity.At the highest point of its trajectory, the rubber ball has zero kinetic energy, so its potential energy must be equal to the potential energy stored in the compressed spring:PE = (1/2)k(3x)^2 = (9/2)kx^2The potential energy at this point will also be equal to the gravitational potential energy at its highest point:PE = mghwhere g is the acceleration due to gravity.Equating the two expressions for potential energy, we get:(9/2)kx^2 = mghSolving for h, we get:h = (9/2)(k/m)x^2gTherefore, if the spring is compressed by 3x, the rubber ball will reach a height of:h' = (9/2)(k/m)(3x)^2g = 27hSo the rubber ball will reach a height that is 27 times higher if the spring is compressed by 3x compared to when it is compressed by x.For more such question on rubber ball
https://brainly.com/question/24163832
#SPJ11
which of the following statements about the image formed by this lens must be true? a. the image is always real and inverted. b. the image could be real or virtual, depending on how far the object is past the focal point. c. the image could be erect or inverted, depending on how far the object is past the focal point. d. the image is always on the opposite side of the lens from the object.
The correct statement among the given options is b. The image could be real or virtual, depending on how far the object is past the focal point.
This statement accurately describes the behavior of a lens. When an object is placed beyond the focal point of a lens, a real and inverted image is formed on the opposite side of the lens.
This situation corresponds to a real image. However, if the object is placed between the lens and its focal point, the image formed is virtual, upright, and on the same side as the object.
Thus, depending on the object's position relative to the focal point, the image can be either real or virtual.
The image being erect or inverted (option c) and the image always being on the opposite side of the lens from the object (option d) are incorrect statements.
For more such questions on object, click on:
https://brainly.com/question/28308143
#SPJ11