Two linearly independent solutions of the differential equation y - 6y +25y = 0 are (Select the correct answer). II) Write the general solution. a.y=e", y =e* b.y = cos(4x).), = sin(4x) y=e* cos(3x).), = e* sin(3x) d.y=e* cos(4x),y,=e* sin(4x) e.y=e* yn=e*

The two figures are not similar and hence will not exactly map to each other

In math, two polygons qualify as similar only under the following condition:

In the polygon the ratio of the sides are not proportional. the sides are

Red: 3 units x 3 units

Blue: 1.5 units x 4 units

Learn more about similar polygons

https://brainly.com/question/1493409

#SPJ1

The probability of receiving more than 5 calls during the next 15 minutes is approximately 0.0322.

To solve this problem, we will use the Poisson probability distribution formula, which is:

P(X = k) = (e^(-λ) * λ^k) / k!

where:

P(X = k) is the probability of getting k events in a specific time interval

e is Euler's number (approximately equal to 2.71828)

λ is the average rate of events per interval (also known as the Poisson parameter)

k is the number of events we want to calculate the probability for

k! is the factorial of k (i.e., k! = k x (k-1) x (k-2) x ... x 2 x 1)

In this problem, we are given that the rate of calls to a customer service center follows a Poisson process with a rate of 1 call every 3 minutes. Therefore, the average rate of calls per minute (i.e., λ) is:

λ = 1 call / 3 minutes = 1/3 calls per minute

Now, we want to find the probability of receiving more than 5 calls during the next 15 minutes. We can use the Poisson formula to calculate this probability as follows:

P(X > 5) = 1 - P(X ≤ 5)

= 1 - ∑(k=0 to 5) [e^(-λ) * λ^k / k!]

= 1 - [(e^(-λ) * λ^0 / 0!) + (e^(-λ) * λ^1 / 1!) + ... + (e^(-λ) * λ^5 / 5!)]

Substituting λ = 1/3 and simplifying the equation, we get:

P(X > 5) = 1 - [(e^(-1/3) * 1^0 / 0!) + (e^(-1/3) * 1^1 / 1!) + ... + (e^(-1/3) * 1^5 / 5!)]

≈ 0.0322

Therefore, the probability of receiving more than 5 calls during the next 15 minutes is approximately 0.0322.

To learn more about minutes visit:

https://brainly.com/question/15600126

#SPJ11

To help you find the local and absolute extrema for the function f(x) = sqrt(4 - x) over the domain [1, 4]. Here are the steps:

1. Identify the function and domain: f(x) = sqrt(4 - x) over [1, 4].
2. Find the critical points by taking the derivative of the function and setting it to zero. For f(x), we have:

  f'(x) = -1/(2*sqrt(4 - x))

3. Solve f'(x) = 0. However, in this case, the derivative is never equal to zero.
4. Check the endpoints of the domain, which are x = 1 and x = 4. Additionally, look for any points where the derivative is undefined (in this case, x = 4, as it would make the denominator zero).

5. Evaluate the function at these points:
  f(1) = sqrt(4 - 1) = sqrt(3)
  f(4) = sqrt(4 - 4) = 0

6. Compare the function values and determine the extrema:
  - The absolute maximum is at x = 1 with a value of sqrt(3).
  - The absolute minimum is at x = 4 with a value of 0.

In conclusion, the function f(x) = sqrt(4 - x) has an absolute maximum of sqrt(3) at x = 1 and an absolute minimum of 0 at x = 4 over the domain [1, 4]. Since the derivative never equals zero, there are no local extrema within the domain. The extrema, ordered from smallest to largest x, are as follows:

- Absolute minimum: (4, 0)
- Absolute maximum: (1, sqrt(3))

More on extrema : https://brainly.com/question/1938915

#SPJ11

To solve the given separable differential equation, we first rewrite it as:

1/(e^ 3u +3t) du = dt

Integrating both sides, we get:

∫ 1/(e^ 3u +3t) du = ∫ dt

=> (1/3) * ln|e^3u + 3t| + C = t + K     (where C and K are constants of integration)

Using the initial condition, u(0) = 9, we can find the value of K as:

(1/3) * ln|e^27| + C = 0 + K

=> ln|e^27| + 3C = 0 + 3K

=> 27 + 3C = 3K

=> K = 9 + C

Therefore, the final solution is given by:

(1/3) * ln|e^3u + 3t| + C = t + 9

where C is a constant given by:

C = K - 9

Thus, we have solved the given separable differential equation and found the general solution with the given initial condition.

The dot product of u.v is  -87.

The dot product, also called scalar product, is a the sum of the products of corresponding components. measure of closely two vectors align, in terms of the directions they point.

If we have 2 vectors

A= ⟨a, b⟩

and B =  ⟨c, d⟩

The dot product is

A . B = ⟨a, b⟩ . ⟨c, d⟩ = ac + bd

Here, u = 4i − 7j and v = −6i + 9j

The dot product is:

u . v = ( 4 ,− 7 ). ( −6 , 9)

u . v= 4 . (-6) + (-7). (9)

u. v = -24 - 63

u. v = -87

Learn more about Dot product at:

https://brainly.com/question/29097076

#SPJ1

Ry(s, t) - aé (s – 1)(t - 1)R,(s – 1,t - 1) = Ru(s, t)

We start by computing the autocorrelation function of y(t) and cross-correlation function of u(t) and y(t).

Autocorrelation function of y(t):

Ry(s, t) = E[y(s)y(t)]

Cross-correlation function of u(t) and y(t):

Ru(s, t) = E[u(s)y(t)]

Using the given equation, we can rewrite y(t) as:

y(t) = u(t) - a(y(t-1) - y*(t-1))

where y*(t) denotes the conjugate of y(t).

Taking the expectation of both sides:

E[y(t)] = E[u(t)] - a[E[y(t-1)] - E[y*(t-1)]]

Since y(t) and u(t) are stationary processes, their expectations are constant with respect to time.

Let's denote E[y(t)] and E[u(t)] as µy and µu, respectively. We can then rewrite the above equation as:

µy = µu - a(µy - µ*y)

where µ*y denotes the conjugate of µy.

Similarly, taking the expectation of both sides of y(s)y(t), we get:

Ry(s, t) = Eu(s)y(t) - aRy(s-1, t-1) + aRy(s-1, t-1) - a^2Ry(s-2, t-2) + a^2Ry(s-2, t-2) - ...

Using the fact that Ry(s-1, t-1) = Ry*(t-1, s-1), we can simplify the above expression as:

Ry(s, t) - aRy(s-1, t-1) = Eu(s)y(t) - aRy*(t-1, s-1) + a*Ry(s-1, t-1)

Multiplying both sides by a, we get:

a[Ry(s, t) - aRy(s-1, t-1)] = aEu(s)y(t) - a^2Ry*(t-1, s-1) + a^2*Ry(s-1, t-1)

Adding aRy(s-1, t-1) and subtracting a^2Ry(s-1, t-1) on the right-hand side, we get:

a[Ry(s, t) - aRy(s-1, t-1)] + aRy(s-1, t-1) - a^2Ry(s-1, t-1) = aEu(s)y(t) - a^2Ry*(t-1, s-1) + a^2*Ry(s-1, t-1)

Simplifying both sides, we obtain the desired result:

Ry(s, t) - aé (s – 1)(t - 1)R,(s – 1,t - 1) = Ru(s, t)

To learn more about autocorrelation visit:

https://brainly.com/question/30002096

#SPJ11

Answer:

Step-by-step explanation:

Your answer is correct

8 + v = 26

v +8 -8 = 26 - 8

v = 18

Answer: V=18

Step-by-step explanation:

PEMDAS can be used to solve this problem. PEMDAS stands for parentheses, exponents, multiplication, division, addition, and subtraction. You see that there are no parentheses, exponents, or multiplication/division steps so you have addition left. To solve 26=8+v, you have to isolate the variable by subtracting the 8 on both sides of the equation. 26-8 is 18, so, the final equation is v=18.

Answer:

Step-by-step explanation:

Yes, repeating two simple arithmetic operations will eventually transform every positive integer into 1.

From the question, we have the following parameters that can be used in our computation:

f(n) = n/2 if n%2 = 0

f(n) = 3n + 1 if n%2 = 1

The above definition means that

f(n) = n/2 if n is even

f(n) = 3n + 1 if n is odd

To check if repeating operations would transform to 1, we can set n = 10

and then evaluate the function values

So, we have

f(10) = 10/2 = 5

f(5) = 3(5) + 1 = 16

f(16) = 16/2 = 8

f(8) = 8/2 = 4

f(4) = 4/2 = 2

f(2) = 2/2 = 1

See that the end result of the operations is 1

Hence, repeating two operations will transform every positive integer into 1

Read more about functions at

https://brainly.com/question/27262465

#SPJ1

Is each point a solution to the given system of equations;

(-2, 3): Yes.

(2, 5): No.

(0, 2): Yes.

(1, 0): No.

In order to graph the solution for the given system of linear inequalities on a coordinate plane, we would use an online graphing calculator to plot the given system of linear inequalities and then check the point of intersection;

y > x + 1          .....equation 1.

y < -2x + 6         .....equation 2.

Based on the graph (see attachment), we can logically deduce that the solution to the given system of linear inequalities is the shaded region behind the dashed lines, and the point of intersection of the lines on the graph representing each, which is given by the ordered pairs (-2, 3) and (0, 2).

Read more on inequalities here: brainly.com/question/17064077

#SPJ1

Answer:

To find the center of the given ellipse, we need to first put the equation in standard form:

9x^2 + y^2 - 18x - 6y + 9 = 0

We can start by completing the square for both the x and y terms. For the x terms, we can add and subtract (18/2)^2 = 81 to get:

9(x^2 - 2x + 81/9) + y^2 - 6y + 9 = 0

Simplifying inside the parentheses, we get:

9(x - 9/3)^2 + y^2 - 6y + 9 = 0

For the y terms, we can add and subtract (6/2)^2 = 9 to get:

9(x - 3)^2 + (y - 3)^2 = 36

Dividing both sides by 36, we get:

[(x - 3)^2]/4 + [(y - 3)^2]/36 = 1

Comparing this to the standard form of an ellipse:

[(x - h)^2]/a^2 + [(y - k)^2]/b^2 = 1

We can see that the center of the ellipse is at the point (h, k), which in this case is (3, 3). Therefore, the center of the given ellipse is (3, 3).

Step-by-step explanation:

Answer:

center, = 9, 3

radius = 9

Step-by-step explanation:

9x² + y² - 18x - 6y + 9 = 0

equation of a circle is,

x² + y² + 2ax + 2by + c = 0

where center of a circle equals, -a, -b

radius = √a² + b² - c

by comparing the general equation from the given equation,

2ax = - 18x

a = -9

2by = -6y

b = -3

center of a circle -a, -b will be 9,3

radius = √81 + 9 -9

=√81

=9

The first object, 11 choices for the second object (since one has already been chosen), 10 choices for the third object, and so on, until we have 6 choices for the seventh object. The product of these choices gives us the total number of permutations.

(a) The sample space for tossing a coin twice can be represented as follows:

{HH, HT, TH, TT}

The event that the second toss is tails can be represented as follows:

{HT, TT}

(b) If the order of the choices is relevant, then we use the permutation formula. The number of permutations of n objects taken r at a time is given by:

nPr = n! / (n - r)!

where n is the total number of objects, and r is the number of objects chosen.

(a) If the order of the choices is not relevant, we use the combination formula. The number of combinations of n objects taken r at a time is given by:

nCr = n! / (r!(n - r)!)

where n is the total number of objects, and r is the number of objects chosen.

In this case, we want to choose 7 objects out of 12, without regard to order. So the answer to part (a) is:

12C7 = 792

In part (b), we want to choose 7 objects out of 12, but the order of the choices matters. So the answer is:

12P7 = 11,440,640

This is because we have 12 choices for the first object, 11 choices for the second object (since one has already been chosen), 10 choices for the third object, and so on, until we have 6 choices for the seventh object. The product of these choices gives us the total number of permutations.

To learn more about permutations visit:

https://brainly.com/question/31329340

#SPJ11

This is because the amount Rachel owes her parents increases by $75 every week, which is represented by the linear term 75x. The starting amount she owes her parents is $800, which is represented by the constant term 800. Therefore, the linear model for this situation is f(x) = 800x + 75.

Since Rachel is paying back $75 every week, the relationship between the amount owed and the number of weeks is linear. We can represent this linear model relationship as a function f(x), where x is the number of weeks.

Now, let's look at the given options and identify the correct linear model:

a. f(x) = 800x + 75
b. f(x) = 800x - 75
c. f(x) = 75x + 800
d. f(x) = 75 - 800
e. f(x) = -75 + 800
f. f(x) = -75 - 800

Since Rachel initially owes $800 and is paying back $75 every week, the correct model should have a starting value of 800 and a decrease of 75 for each week. The model that represents this is:

f(x) = -75x + 800

Comparing this to the given options, we can see that the correct answer is:
c. f(x) = 75x + 800

Learn more about Linear Models:

brainly.com/question/29757372

#SPJ11

Using Chebyshev's Inequality, the lower bound for the number of signals that need to be sent so that the total number of errors are within 10% of the expected number of errors with at least 95% probability is 846.

Chebyshev's Inequality states that for any random variable X with finite mean μ and variance σ², the probability that X deviates from μ by more than k standard deviations is at most 1/k².

In other words,

P(|X-μ| ≥ kσ) ≤ 1/k².

In this problem, we know that the number of errors follows a Poisson distribution with a mean of 36 errors, which means that the mean and variance are both 36.

Let X be the total number of errors in n signals. We want to find the smallest value of n such that

P(|X-μn| ≥ 0.1μn) ≤ 0.05,

where μn = nμ is the expected number of errors in n signals.

Using Chebyshev's Inequality, we have

P(|X-μn| ≥ 0.1μn) ≤ σ²/[0.1²μn²] = σ²/[0.01μ²n²] = 1/25,

where σ² = 36 is the variance of X.

Therefore, we need to solve the inequality

1/25 ≤ 0.05,

which implies n ≥ 846. Hence, the lower bound for the number of signals that need to be sent is 846.

To know more about Chebyshev's Inequality, refer here:
https://brainly.com/question/13184184#
#SPJ11

The probability of the arrow landing on an odd number is the number of odd numbers divided by the total number of possible outcomes. Therefore, the probability of the arrow landing on an odd number is  0.5 or 50%.


To find the probability that the arrow will point at an odd number on a circular board with 8 equal parts, we'll first determine the total number of odd numbers present and then divide that by the total number of possible outcomes.

Step 1: Identify the odd numbers on the board. They are 1, 3, 5, and 7. The game consists of spinning the arrow on a circular board with 8 equal parts, which means there are 8 possible outcomes or numbers. Since we want to know the probability of landing on an odd number, we need to count how many odd numbers are on the board. In this case, there are four odd numbers: 1, 3, 5, and 7.

Step 2: Count the total number of odd numbers. There are 4 odd numbers.

Step 3: Count the total number of possible outcomes. Since the board is divided into 8 equal parts, there are 8 possible outcomes.

Step 4: Calculate the probability. The probability of the arrow pointing at an odd number is the number of odd numbers divided by the total number of possible outcomes.

Probability = (Number of odd numbers) / (Total number of possible outcomes)
Probability of landing on an odd number = Number of odd numbers / Total number of possible outcomes
Probability of landing on an odd number = 4 / 8

Step 5: Simplify the fraction. The probability of the arrow pointing at an odd number is 1/2 or 50%.

So, the probability that the arrow will point at an odd number is 1/2 or 50%.

Learn more about probability:

brainly.com/question/30034780

#SPJ11

Answer:

There is only one way to obtain a sum of 12 when rolling two standard six-sided dice, which is to get a 6 on both dice.

The probability of rolling a 6 on one die is 1/6. Therefore, the probability of rolling a 6 on both dice is:

P(D1 = 6 and D2 = 6) = P(D1 = 6) x P(D2 = 6) = 1/6 x 1/6 = 1/36

Therefore, the probability of rolling a sum of 12 with two standard six-sided dice is 1/36.

P(D1 + D2 = 12) = 1/36

IF THIS HELPS, CAN YOU PLEASE GIVE MY ANSWER BRAINLIEST?:)

The estimated value of λ and x = 2.91, we get:

P(1.2 ≤ median load ≤ 6) = 1 - e^(-0.38*2.91) - (

2.2.1 To calculate the probability that the maximum load is at least 3, we first need to find the distribution of the maximum load. Let X be the random variable representing the loads. Then the probability that the maximum load is less than or equal to x is given by:

P(X ≤ x)^n = (1 - e^(-λx))^n

where n is the sample size. Taking the derivative of this expression with respect to x and setting it equal to zero, we get:

n(1 - e^(-λx))^(n-1)λe^(-λx) = 0

Solving for x, we get

x = -ln(1 - 1/n)/λ

Now, we can calculate the probability that the maximum load is at least 3 as follows:

P(X ≤ 3)^n = (1 - e^(-λ*3))^n

P(maximum load ≥ 3) = 1 - P(X ≤ 3)^n

Substituting the estimated value of λ (sample variance of the loads) and the sample size n = 5, we get:

P(maximum load ≥ 3) = 1 - (1 - e^(-0.38*3))^5 ≈ 0.578

Therefore, the probability that the maximum load is at least 3 is approximately 0.578.

2.2.2 To calculate the probability that the minimum load is no more than 4.11, we can use the same approach as in 2.2.1, but with the inequality flipped:

P(minimum load ≤ 4.11) = 1 - P(X ≥ 4.11)^n

where we need to find the distribution of the minimum load. The probability that the minimum load is greater than or equal to x is given by:

P(X ≥ x) = e^(-λx)

Substituting the estimated value of λ and x = 4.11, we get:

P(minimum load ≤ 4.11) = 1 - e^(-0.38*4.11) ≈ 0.448

Therefore, the probability that the minimum load is no more than 4.11 is approximately 0.448.

2.2.3 To calculate the probability that the median load is between 1.2 and 6, we first need to estimate the median load from the sample. The sample is already sorted as 2.39, 2.51, 2.91, 3.08, 3.11. The median load is the middle value, which is 2.91.

The probability that the median load is less than or equal to x is given by:

P(median load ≤ x) = P(X1 ≤ x, X2 ≤ x, X3 ≥ x, X4 ≥ x, X5 ≥ x) + P(X1 ≤ x, X2 ≤ x, X3 ≥ x, X4 ≥ x, X5 ≤ x) + P(X1 ≤ x, X2 ≤ x, X3 ≥ x, X4 ≤ x, X5 ≥ x)

where Xi represents the ith load in the sample. The probability that the median load is between 1.2 and 6 is then given by:

P(1.2 ≤ median load ≤ 6) = P(median load ≤ 6) - P(median load ≤ 1.2)

Substituting the estimated value of λ and x = 2.91, we get:

P(1.2 ≤ median load ≤ 6) = 1 - e^(-0.38*2.91) - (

To learn more about minimum visit:

https://brainly.com/question/21426575

#SPJ11

Answer:

x = 4/3 + t

y = -1/3 - 2t

z = 4/3 - t

Step-by-step explanation:

The given line can be represented by the vector equation:

r = <1, 1, 0> + t<1, -1, 2>

We can find a vector that is perpendicular to this line by taking the cross product of the direction vector <1, -1, 2> with any other vector. Let's choose the vector <1, 0, 0> for this purpose:

n = <1, -1, 2> x <1, 0, 0> = <-2, -1, -1>

Now we have a normal vector n = <-2, -1, -1> to the line we want to find. We can use this vector and the given point (0, 1, 2) to find the equation of the plane that contains the line we want to find:

-2(x-0) - (y-1) - (z-2) = 0

-2x - y - z + 3 = 0

This plane intersects the given line when they have a point in common. To find this point, we can solve the system of equations:

-2x - y - z + 3 = 0

x - y = 1

z = 2t

From the second equation, we get x = t+1 and y = t. Substituting these into the first equation, we get:

-2(t+1) - t - 2t + 3 = 0

t = -1/3

Therefore, the point of intersection is (4/3, -1/3, 4/3). This point lies on both the line and the plane, so it is the point we need to use to find the parametric equations of the line we want to find.

Let's call the point we just found P. We can find the direction vector of the line we want to find by taking the cross product of the normal vector n with the vector from P to the point on the given line:

d = <-2, -1, -1> x <4/3-1, -1/3-1, 4/3-2> = <1, -2, -1>

Therefore, the parametric equations of the line we want to find are:

x = 4/3 + t

y = -1/3 - 2t

z = 4/3 - t

The equation of the line through the point (2,1) with a slope of 3, expressed in slope-intercept form, is y = 3x - 5.

To determine the equation of the line through the point (2,1) with a slope of 3 and express it in slope-intercept form.

Step 1: Recall the slope-intercept form of a linear equation, which is y = mx + b, where m is the slope and b is the y-intercept.

Step 2: Substitute the given slope (m = 3) and the coordinates of the given point (x = 2, y = 1) into the equation: 1 = 3(2) + b.

Step 3: Solve for b. First, multiply 3 by 2 to get 6: 1 = 6 + b. Then, subtract 6 from both sides to find the value of b: b = -5.

Step 4: Write the final equation of the line by substituting the values of m and b back into the slope-intercept form: y = 3x - 5.

Learn more about slope-intercept form: https://brainly.com/question/22057368

#SPJ11

Answer:

1) d. -3(x^2)

2) e. 2ba

3) b. 10x

4) c. 2a

5) a. (a^2)b

Answer: A 4 digit PIN number is selected. What is the probability that there are no repeated digits? ... There are 10 possible values for each digit of the PIN (namely: 0 ..

Step-by-step explanation:

Yes, it would be unusual if less than 52% of the sampled teenagers owned smartphones.

We are given the mean (μp) as 0.55 and the standard deviation (σp) as 0.0397. We need to find the probability of having less than 52% (0.52) of teenagers owning smartphones.

1) Calculate the z-score.
z = (x - μp) / σp
z = (0.52 - 0.55) / 0.0397
z ≈ -0.76

2) Find the probability associated with the z-score.
Using a z-table or a calculator, we find that the probability of having a z-score less than -0.76 is approximately 0.224. This means there is a 22.4% chance that less than 52% of the sampled teenagers would own smartphones.

Since the probability of having less than 52% of the sampled teenagers owning smartphones is 22.4%, it would be considered unusual, as the probability is relatively low.

To know more about probability visit:

https://brainly.com/question/31120123

#SPJ11

First estimate: To estimate the miles per gallon, we can round 280 miles to 300 miles and round 9.2 gallons to 10 gallons. So, the first estimated miles per gallon would be 30 mpg.

Exact answer: To calculate the exact miles per gallon, we need to divide the total miles traveled (280 miles) by the total gallons of gas used (9.2 gallons).

280 miles ÷ 9.2 gallons = 30.43478261 mpg

Rounded to three decimal places, the exact answer is 30.435 mpg.

Learn more about First estimate: https://brainly.com/question/28416295

#SPJ11

The coordinate matrix of the vector in the S' basis is [5/2 5/2]t.

(a) To verify that S and S' are bases, we need to check that they are linearly independent and span R^2.

First, we check if S is linearly independent:

c1 [2 1] + c2 [1 2] = [0 0] has only the trivial solution c1 = 0 and c2 = 0, which means that S is linearly independent.

Next, we check if S spans R^2. Since S has two vectors and R^2 is two-dimensional, it is enough to show that the two vectors in S are not collinear. We can see that [2 1] and [1 2] are not collinear, so S spans R^2.

Similarly, we can check that S' is linearly independent:

c1 [1 0] + c2 [1 1] = [0 0] has only the trivial solution c1 = 0 and c2 = 0, which means that S' is linearly independent.

We can also check that S' spans R^2:

Any vector [a b] in R^2 can be written as [a b] = (a-b)/2 [1 0] + (a+b)/2 [1 1], which shows that S' spans R^2.

Therefore, S and S' are bases of R^2.

(b) To compute the transition matrices Ps-s and Ps+s, we need to find the coordinate matrices of the vectors in S and S' with respect to each other. We can use the formula [v]s = Ps,t [v]t, where Ps,t is the transition matrix from basis t to basis s.

To find Ps-s, we need to express the vectors in S in terms of S':

[2 1] = (1/2) [1 0] + (1/2) [1 1]

[1 2] = (-1/2) [1 0] + (3/2) [1 1]

Therefore, the transition matrix Ps-s is:

Ps-s = [1/2 -1/2]

[1/2 3/2]

To find Ps+s, we need to express the vectors in S' in terms of S:

[1 0] = (2/3) [2 1] - (1/3) [1 2]

[1 1] = (1/3) [2 1] + (2/3) [1 2]

Therefore, the transition matrix Ps+s is:

Ps+s = [2/3 1/3]

[-1/3 2/3]

(c) Given the coordinate matrix [3 2]s of a vector in the S basis, we can use the formula [v]s' = (Ps-s)^(-1) [v]s to find its coordinate matrix in the S' basis:

[v]s' = (Ps-s)^(-1) [3 2]s

= [1/2 1/2] [3 2]t

= [5/2 5/2]t

Therefore, the coordinate matrix of the vector in the S' basis is [5/2 5/2]t.

(d) Given the coordinate matrix [3 2]s' of a vector in the S' basis, we can use the formula [v]s = (Ps+s)^(-1) [v]s' to find its coordinate matrix in the S basis:

[v]s = (Ps+s)^(-1) [3 2]s'

To learn more about coordinate matrix visit: https://brainly.com/question/28194667

#SPJ11

Answer:

$2

Step-by-step explanation:

$10+$10=$20

$20-$18= $2

Answer: 18/14 or 18:14

Step-by-step explanation: this is relatively simple you have 32 in all and 14 are blue so 32-14=18 now you know there are 18 red marbles now to set up the ratio 18/14 or 18:14 (to check your work add 18+14=32)

The sinking fund payment will be $1,096.28.
Total payments into the bond will be $61,391.68.
The bond will earn $25,608.32 interest after 14 years.

Let's use the Time Value of Money (TVM) Solver to determine the quarterly payment needed to achieve your goal.

Given:
- Future Value (FV) = $87,000
- Time (n) = 14 years, compounded quarterly, so n = 14 * 4 = 56 quarters
- Interest rate (i%) = 3.2% compounded quarterly, so i% = 3.2 / 4 = 0.8% per quarter
- Present Value (PV) = 0, since we're starting from scratch
- PMT Type: END (payments made at the end of each quarter)

Now, input these values into the TVM Solver:

n = 56
i% = 0.8
PV = 0
PMT = ?
FV = 87,000

Solve for PMT:

PMT = -1,096.28 (rounded to the nearest cent)

The sinking fund payment will be $1,096.28.

To find the total payments into the bond, multiply the payment amount by the number of quarters:

Total payments = PMT * n = 1,096.28 * 56 = $61,391.68

To find the interest earned after 14 years, subtract the total payments from the future value of the bond:

Interest earned = FV - Total payments = 87,000 - 61,391.68 = $25,608.32

So, the bond will earn $25,608.32 in interest after 14 years.

Your answer:
The sinking fund payment will be $1,096.28.
Total payments into the bond will be $61,391.68.
The bond will earn $25,608.32 interest after 14 years.

To learn more about interest

https://brainly.com/question/25845758

#SPJ11

The equation shows a correct trigonometric ratio for angle A in the right triangle  is cos A = 15/17. Option 3

To determine the ratio, we need to know the different trigonometric identities.

These identities are;

The different ratios of these identities are;

sin θ = opposite/hypotenuse

cos θ = adjacent/hypotenuse

tan θ = opposite/adjacent

From the diagram shown, we have that;

Opposite = 8cm

Adjacent = 15cm

Hypotenuse = 17cm

Using the cosine identity, we have;

cos A = 15/17

Learn about trigonometric identities at: https://brainly.com/question/7331447

#SPJ1

Answer:

Set your calculator to degree mode.

cos(48°) = y/35

y = 35cos(48°)

tan(20°) = x / 35cos(48°)

x = 35cos(48°)tan(20°) = 8.5 inches

Answer:

8.5 in

Step-by-step explanation:

Find height, h, of the triangle:

cos48 = h/35

h = cos48(35) = 23.42

tan20 = x/23.42

x = tan20(23.42) = 8.524 ≈ 8.5 in

Since it transferred the least amount of thermal energy to the spoon. The answer is (D).

The temperature of the coffee will be highest in the cup where the least amount of thermal energy is transferred to the spoon. This can be calculated using the formula:

Q = mcΔT

where Q is the thermal energy transferred, m is the mass of the coffee, c is the specific heat capacity of the coffee, and ΔT is the change in temperature.

Since the cups and coffee are identical, m and c are the same for all cups. Therefore, the cup with the smallest value of Q will have the highest temperature.

Let's calculate Q for each cup and spoon:

For Cup A and Spoon 1:

Q = (50 g)(4.18 J/gC)(95 - 22 C) = 13661 J

For Cup B and Spoon 2:

Q = (50 g)(4.18 J/gC)(95 - 24 C) = 13496 J

For Cup C and Spoon 3:

Q = (50 g)(4.18 J/gC)(95 - 26 C) = 13331 J

For Cup D and Spoon 4:

Q = (50 g)(4.18 J/gC)(95 - 28 C) = 13166 J

Therefore, Cup D with Spoon 4 will have the highest temperature at thermal equilibrium, since it transferred the least amount of thermal energy to the spoon. The answer is (D).

To learn more about temperature visit:

https://brainly.com/question/11464844

#SPJ11