The pictures shown represent three different soil profiles, each with unique characteristics. Profile a has plants at the top and a layer of larger rocks beneath. The correct option is A
Profile b also has plants at the top, but it has three distinct layers including a granular top layer, a layer of medium-sized rocks, and a layer of larger rocks at the bottom.
Profile c also has plants at the top, but it only has two layers including a granular top layer and a layer of larger rocks at the bottom.
From these observations, it is clear that profile a and profile b are formed before profile c.
This is because profile c has similar characteristics to both profiles a and b but only has two layers instead of three.
Therefore, profile c is likely a result of erosion or other natural processes breaking down the distinct layers present in profiles a and b.
To know more about soil profiles refer here:
https://brainly.com/question/28506778#
#SPJ11
Other than sand dunes in a desert environment, where else would you expect to find well-rounded and sorted sand deposits?
A) delta
B)beach
C)lake
D)glacier
E)reef
Other than sand dunes in a desert environment, you would expect to find well-rounded and sorted sand deposits in environments where there is water movement and erosion.
A) Delta: Deltas are formed at the mouth of rivers where they meet an ocean, lake, or other body of water. The river deposits sediment, including sand, as it slows down in the body of water. The sand may be well-rounded and sorted due to the water movement and erosion that occurs in the delta environment.
B) Beach: Beaches are formed from the accumulation of sediment, including sand, that is transported by waves and currents along the shoreline. The sand may be well-rounded and sorted due to the water movement and erosion that occurs in the beach environment.
C) Lake: Lakes can have sand deposits that are well-rounded and sorted, especially in areas where there is wave action and currents. The sand may be transported to the lake from nearby rivers or streams or may be formed from the erosion of the lake shore.
D) Glacier: Sand deposits associated with glaciers may not be well-rounded, as the glaciers can transport a variety of sediment sizes and shapes. However, some sand deposits associated with glaciers may be sorted due to the water movement and erosion that occurs as the glacier melts.
E) Reef: Sand deposits may be found in coral reef environments, where waves and currents transport sediment onto the reef. The sand may be well-rounded and sorted due to the water movement and erosion that occurs in the reef environment.
Learn more about erosion: https://brainly.com/question/3852201
#SPJ11
Learning how to use ______ waves to predict volcanic eruptions is complex, since five different waves can be produced by numerous volcanic processes.
Learning how to use seismic waves to predict volcanic eruptions is complex, since five different types of waves can be produced by numerous volcanic processes.
Seismic waves are waves of energy that travel through the Earth's interior and can be detected and measured by seismometers.
They are generated by a variety of sources, including earthquakes, volcanic eruptions, and human activities such as explosions and mining.
The five types of seismic waves are primary (P) waves, secondary (S) waves, Love waves, Rayleigh waves, and long-period (LP) waves.
Each type of wave behaves differently as it travels through the Earth's interior, and can provide information about the structure and composition of the Earth as well as the nature of the seismic source that produced it.
For such more question on volcanic:
https://brainly.com/question/1156480
#SPJ11
Which are the last seismic waves to arrive at a seismic station?
A) S-waves
B) Body waves
C) Compressional waves
D) Surface waves
E) P-waves
The last seismic waves to arrive at a seismic station are Surface waves. Seismic waves are the vibrations generated by earthquakes and recorded by seismic stations.
There are two main categories of seismic waves: body waves and surface waves. Body waves consist of P-waves (compressional waves) and S-waves, both of which travel through the Earth's interior. Surface waves, on the other hand, travel along the Earth's surface and generally cause more damage due to their larger amplitudes and longer durations.
P-waves, being compressional waves, are the fastest of the three types and arrive first at a seismic station. They compress and expand the ground in the direction of their propagation. S-waves arrive next, being slower than P-waves, and cause the ground to move perpendicular to their direction of travel.
Surface waves arrive last because they travel at a slower speed than body waves. They can be further divided into two types: Rayleigh waves and Love waves. Rayleigh waves cause the ground to move in an elliptical motion, while Love waves create horizontal ground movement. The combination of these two surface wave types can lead to significant damage during earthquakes.
Learn more about seismic waves here:
https://brainly.com/question/13056218
#SPJ11
Any hard, colorful mineral that has a brilliant or glassy luster is called a(n) ____________.
Any hard, colorful mineral that has a brilliant or glassy luster is called a gemstone. Gemstones are highly valued for their beauty and rarity and are often used in jewelry and decorative items.
Some popular gemstones include diamonds, emeralds, rubies, sapphires, and topaz. The glassy luster of a gemstone is due to its smooth, reflective surface, which is formed as the mineral crystalizes. The color of a gemstone is determined by the presence of certain minerals or elements within the crystal structure. For example, the presence of chromium gives rubies their red color, while iron gives amethyst its purple hue. Gemstones can be found in a variety of locations around the world, including mines, rivers, and beaches. Due to their value, gemstones are often subject to mining and trade regulations to prevent exploitation and ensure ethical sourcing.
Learn more about gemstones here
https://brainly.com/question/24448445
#SPJ11
What is the most common indirect effect that volcanic activity can have on humans?
Volcanic activity can have a variety of indirect effects on humans, ranging from economic impacts to environmental changes. However, one of the most common indirect effects that volcanic activity can have on humans is the disruption of air travel.
When a volcanic eruption occurs, it can release large amounts of ash and other particles into the atmosphere. These particles can pose a significant threat to airplanes, as they can damage engines and other critical components. As a result, air travel in the vicinity of the eruption can be severely impacted, with flights being delayed, cancelled, or rerouted to avoid the affected area.This disruption of air travel can have significant economic consequences, as airlines may lose revenue and travelers may be stranded or forced to find alternative modes of transportation. Additionally, the disruption can have wider-reaching effects, as it can impact industries that rely on air transportation, such as tourism and global trade.While disruptions to air travel are the most common indirect effect of volcanic activity on humans, it is important to note that the impacts can vary widely depending on the specific characteristics of the eruption and the surrounding environment. As such, it is critical for scientists and policymakers to closely monitor volcanic activity and develop strategies to mitigate its potential impacts on human populations.
Learn more about humans here
https://brainly.com/question/24067944
#SPJ11
a welded igneous texture indicates that:
a. there was a lot of gas in the magma
b. the rock cooled quickly
c. the rock broke apart as it flowed
d. the rock cooled slowly
e. the ash and pumice were hot and became compacted
The correct answer is d. The rock cooled slowly. A welded igneous texture indicates that the rock cooled slowly. This texture is formed when hot magma, rich in gas, cools and solidifies gradually over time.
As the magma cools, it solidifies into a cohesive mass, and the gases escape, leaving behind a dense, welded texture. This process can take weeks, months, or even years, depending on the size and composition of the magma body. The slow cooling allows for the mineral crystals to grow and interlock with each other, creating a strong, durable rock. The resulting rock is typically fine-grained, with no visible crystals or pores. So, option d. the rock cooled slowly, is the correct answer to your question.
To know more about hot magma.
https://brainly.com/question/24384827
#SPJ11
Which type of synthetic polymer is the most recycled in terms of millions of pounds?
Answer:
While all plastics are not equal with respect to ease of recycling, the most easy-to-handle favorites are polyethylene terephthalate (PET) and high-density polyethylene (HDPE). These are the most commonly recycled plastics and have SPI code identification numbers “1”and “2”, respectively.
Hope this helps :)
Pls brainliest...
It was long thought that ________ was the solution to water pollution, something we now know is not accurate, especially for hydrophobic chemicals
Select one:
a. Natural attenuation
b. Channelization
c. Eutrophication
d. Dilution
It was long thought that Dilution was the solution to water pollution, something we now know is not accurate, especially for hydrophobic chemicals. Option D is correct.
Dilution was long thought to be the solution to water pollution because it was believed that by simply adding more water to a polluted body of water, the concentration of pollutants would decrease to safe levels. However, we now know that this is not always the case, especially for hydrophobic chemicals that do not dissolve easily in water. Instead, these chemicals tend to accumulate in sediment and in the fatty tissues of aquatic organisms, where they can cause harm to the ecosystem and pose a risk to human health if consumed. Therefore, it is important to use other methods, such as treatment and prevention, to reduce and eliminate water pollution.
In addition to dilution being an inadequate solution to water pollution, it can also have unintended negative consequences on the ecosystem. Adding large amounts of water to a polluted body of water can alter the natural balance of the ecosystem, leading to changes in water temperature, dissolved oxygen levels, and nutrient availability. This can have a negative impact on the survival of aquatic organisms, particularly those that are adapted to a specific set of environmental conditions.
Learn more about Dilution here:
https://brainly.com/question/28997625
#SPJ11
A phaneritic texture is a characteristic of a____ igneous Rick that cooled _____
A phaneritic texture is a characteristic of a intrusive igneous rock that cooled slowly beneath the Earth's surface. The term "phaneritic" refers to the visible mineral grains that make up the rock, which are typically coarse-grained and can be seen with the eye.
This texture is a result of the slow cooling process, which allows for the minerals to grow and crystallize over a longer period of time.
In contrast, extrusive igneous rocks cool quickly on or near the Earth's surface and have a fine-grained texture. This is because the minerals do not have as much time to grow and crystallize before the rock solidifies. Overall, the texture of an igneous rock can provide important information about its formation and history, and the presence of a phaneritic texture suggests that the rock formed deep within the Earth's crust.
Learn more about phaneritic here:
https://brainly.com/question/12348142
#SPJ11
Which one of the following statements is TRUE?a. Sediment flow increases in the warm water flowing out of a hydropower reservoir.b. Variations in water released from hydropower facilities generally matches the natural flow in the affected rivers.c. Hydropower accounts for more than half of all renewable energy use.d. The construction and use of dams for hydropower produces no greenhouse gases.
Option c. "Hydropower accounts for more than half of all renewable energy use" is true.
Hydropower is a renewable energy source that harnesses the power of flowing water to generate electricity. It is one of the oldest and most widely used forms of renewable energy, and accounts for more than half of all renewable energy use globally.
Hydropower facilities use the natural flow of rivers and streams to turn turbines and generate electricity, with no direct emissions of greenhouse gases. However, the construction and use of dams can have environmental impacts, including habitat destruction, altered river flows, and changes in water temperature and quality.
In addition, variations in water released from hydropower facilities may not always match the natural flow in the affected rivers, which can have negative impacts on aquatic ecosystems and downstream communities.
The correct answer is option c.
To know more about hydropower refer to-
https://brainly.com/question/22258411
#SPJ11
Which of these processes is not a way by which metamorphism occurs?
A. Increases in temperature
B. Burial beneath great depths of rock C. Phase changes
D. Shear at depth within a plate boundary
(Option a, b, c, and d) All of the processes mentioned are ways by which metamorphism occurs. Metamorphism is the process of changing a rock's mineralogy, texture, or composition.
Due to physical and/or chemical changes caused by heat, pressure, or fluids. Increases in temperature (A) can cause changes in mineralogy and texture in a process called thermal metamorphism. Burial beneath great depths of rock (B) can cause an increase in pressure, which can also cause changes in mineralogy and texture in a process called regional metamorphism. Phase changes (C) occur when minerals change from one form to another due to changes in temperature and pressure. Shear at depth within a plate boundary (D) can cause rocks to deform and recrystallize in a process called dynamic metamorphism.
Learn more about changes here:
https://brainly.com/question/29515490
#SPJ11
two stars which are the same intrinsic brightness, but star a is twice as far away as star b. how do their brightnesses compare to our eyes? group of answer choices star a is twice as bright as star b star a is four times as bright as star b star a is 1/2 as bright as star b star a is 1/4 as bright as star b
The brightness of a star decreases with distance from Earth, following an inverse square law. Therefore, if star A is twice as far away as star B, the apparent brightness of star A will be 1/4th (2^(-2)) of the apparent brightness of star B.
However, the intrinsic brightness of both stars is the same. Therefore, the ratio of their intrinsic brightness will be the same as the ratio of their apparent brightness. So, the apparent brightness ratio of 1/4 translates to an intrinsic brightness ratio of 1/1. Therefore, star A and star B have the same intrinsic brightness, even though star B appears 4 times brighter than star A to our eyes due to its closer distance.
A sharp, jagged ridge formed by a glacier is called a(n) __________.
Answer:
arête
Explanation:
An arête is a jagged ridge that remains when cirques form on opposite sides of a mountain.
A worm burrow is an example of which type of fossilization?
A worm burrow is an example of trace fossilization. Trace fossils are the remains of biological activity, such as burrows, footprints, and coprolites (fossilized feces), rather than the preserved remains of an organism's body.
Trace fossils provide important information about the behavior and ecology of ancient organisms, as well as the conditions of their environment. In the case of a worm burrow, the fossilized remains of the burrow show that a worm or other burrowing organism was present in the sediment at some point in the past. This can provide clues about the sedimentary environment and the type of organisms that were living there, as well as how they interacted with their environment. Trace fossils, such as worm burrows, provide important information about the behavior and ecology of ancient organisms. Trace fossils can include impressions, tracks, trails, burrows, borings, and other evidence of the activities of living organisms.
Trace fossils are different from body fossils, which preserve the actual remains of an organism's body, such as bones, shells, and teeth. Trace fossils provide evidence of the behavior of ancient organisms, such as how they moved, what they ate, and how they interacted with their environment.
Learn more about ecology here:
https://brainly.com/question/30429252
#SPJ11
Identify the locations where slaves were most frequently sent after being transported to the new world on the middle passage.
After being transported to the New World on the Middle Passage, slaves were most frequently sent to work on plantations in the Caribbean, Brazil, and the southern colonies of North America.
The Caribbean was a major destination for slaves due to the large number of sugar plantations in the region. Brazil also had a thriving sugar industry as well as large coffee and tobacco plantations.
In North America, slaves were sent primarily to work on cotton, tobacco, and rice plantations in the southern colonies, including Virginia, South Carolina, and Georgia. Slaves were also sent to other parts of the Americas, such as Mexico and Peru, to work in mines or on haciendas.
Overall, the locations where slaves were sent were determined by the demands of the global economy and the specific crops and resources that were being produced in each region.
To know more about slaves refer to-
https://brainly.com/question/16747534
#SPJ11
Slaves were most frequently sent to locations such as the Caribbean islands, Brazil, and the southern colonies of present-day United States.
Explanation:After being transported to the New World on the Middle Passage, slaves were most frequently sent to locations such as the Caribbean islands, Brazil, and the southern colonies of present-day United States, including places like Virginia, South Carolina, and Georgia.
Learn more about Slave Trade here:https://brainly.com/question/31855989
#SPJ12
A(n) ________ facies is associated with a high-pressure, low-temperature environment.
A)zeolite
B)blueschist
C)granulite
D)eclogite
A blueschist facies is associated with a high-pressure, low-temperature environment. This occurs because blueschist facies rocks are formed during subduction, where one tectonic plate is pushed under another.
Blueschist facies is associated with high-pressure, low-temperature environments typically found in subduction zones where oceanic crust is forced beneath continental crust. The high-pressure conditions result from the weight of the overlying rock and the low-temperature conditions occur because the oceanic crust is relatively cold when it enters the subduction zone. These conditions cause minerals to form under high pressure and low temperature, resulting in the characteristic blue color of blueschist.
In this process, the rocks experience high pressure from the overlying material, while the temperature remains relatively low since they do not get close enough to the heat source (Earth's mantle). The characteristic blue color of the minerals in these rocks, such as glaucophane, gives the facies its name.
Learn more about subduction zones here:
brainly.com/question/13788626
#SPJ11
Suppose you see two stars: a blue star and a red star. Which of the following can you conclude about the two stars? Assume that no Doppler shifts are involved. (Hint: Think about the laws of thermal radiation.)
A) The red star is more massive than the blue star.
B) The blue star is more massive than the red star.
C) The blue star is farther away than the red star.
D) The blue star has a hotter surface temperature than the red star.
E) The red star has a hotter surface temperature than the blue star.
The color and temperature of a star are corelated. Blue stars are hotter than red stars, hence their surfaces are hotter. Therefore the option D, The blue star has a hotter surface temperature than the red star is correct.
Astronomers study stars based on their color. The surface temperature of a star determines its color and radiation type. Red stars have a surface temperature of 2,000–4,000 Kelvin, while blue stars have a surface temperature of 10,000–50,000 Kelvin. Thus, a blue star is hotter than a red star.
Stars' physical attributes depend on their surface temperatures. A star's luminosity—the total energy it emits per unit of time—is closely connected to its surface temperature. Surface temperature also impacts a star's spectral lines, which can reveal its chemical and physical attributes.
To know more about stars,
https://brainly.com/question/1237382
https://brainly.com/question/30716005
setting up six corridors through which % of total european freight passes even though they only cover % of the region's roads.
The setup of six corridors through which a significant proportion of European freight passes, despite covering only a small percentage of the region's roads, is a strategic decision aimed at optimizing the transportation of goods across Europe.
These corridors were chosen based on their geographic location, connectivity to major ports and cities, and potential for improving the efficiency of freight transport.
By concentrating the majority of freight traffic on these corridors, it is possible to streamline the movement of goods, reduce congestion and travel time, and lower transport costs.
This approach also facilitates the implementation of sustainable transport solutions, such as intermodal transport, which involves the use of multiple modes of transportation to transport goods.
Overall, the establishment of these corridors highlights the importance of efficient and sustainable freight transport in supporting Europe's economic growth and competitiveness, while minimizing the environmental impact of transportation.
To know more about freight refer here:
https://brainly.com/question/30789296#
#SPJ11
Partial melting of rock in subduction zones is aided by the addition of ______, which is (are) released by sediments on top of the subducting plate.
a. Water
b. Air
c. Sand
d. none
Partial melting of rock in subduction zones is aided by the addition of water, which is (are) released by sediments on top of the subducting plate
However, this partial melting is aided by the addition of water, which is released by sediments on top of the subducting plate. Water is a volatile substance that lowers the melting temperature of rocks, allowing them to partially melt even at lower temperatures. The water is released from the sediments on top of the subducting plate as it gets squeezed and heated during the subduction process. The water then migrates into the overlying mantle wedge, where it interacts with the mantle rocks and triggers partial melting. This partial melting generates magma, which rises to the surface and forms volcanoes. Therefore, the addition of water is crucial for the formation of volcanic arcs in subduction zones. The other options, air and sand, do not have the same effect as water in aiding the partial melting of rock in subduction zones.
Know more about Subduction zones here:
https://brainly.com/question/13788626
#SPJ11
the fetch of a moving storm system on the side of the storm where the wind is blowing in the direction as the storm is moving.multiple choiceboth decreases; opposite and increases; same are correctincreases; oppositeincreases; samedecreases; samedecreases; opposite
The fetch of a moving storm system on the side of the storm where the wind is blowing in the direction as the storm is moving opposite increases. The correct answer is option d.
The fetch refers to the distance over which wind can blow over water and generate waves. In a moving storm system, the fetch on the side of the storm where the wind is blowing in the opposite direction to the storm's movement will decrease because the storm is moving away from the area where the wind can generate waves.
Conversely, the fetch on the side of the storm where the wind is blowing in the same direction as the storm's movement will increase because the storm is pushing more water ahead of it and increasing the area over which wind can generate waves. Therefore, the correct answer is "Increases; opposite."
The correct answer is option d.
To know more about moving storm system refer to-
https://brainly.com/question/30436970
#SPJ11
Complete question
the fetch of a moving storm system on the side of the storm where the wind is blowing in the direction as the storm is moving. multiple choice
a. both decreases;
b. opposite and increases;
c. same are correct increases;
d. opposite increases;
e. same decreases;
f. same decreases;
g. opposite
__________ is when various geologic materials exposed to the same environmental conditions will weather differently depending on their composition.
A) Hydrolysis
B) Chemical weathering
C) Differential weathering
D) Oxidation
E) Physical weathering
Differential weathering is when various geologic materials exposed to the same environmental conditions will weather differently depending on their composition. Therefore the correct option is option C.
Differential weathering is a process in which various geologic materials exposed to the same environmental conditions will weather differently depending on their composition.
This can result in the formation of unusual and distinctive landforms, such as the hoodoos in Bryce Canyon National Park, where harder and more resistant rock layers stand above softer, more easily weathered layers.
The differential weathering occurs because different rocks have different physical and chemical properties that affect how they respond to environmental forces such as wind, water, and temperature changes.Therefore the correct option is option C.
For such more question on environmental:
https://brainly.com/question/23946590
#SPJ11
Petrified wood is an example of what type of fossil preservation?
A)Permineralization
B) Mold
C)Cast
D) Impression
E)Burrow
Your answer: A) Permineralization. Petrified wood is an example of permineralization, a type of fossil preservation. In this process, minerals from the surrounding environment fill in the pores and spaces within the wood, gradually replacing the organic material and preserving its original structure. This creates a fossilized, stone-like replica of the original wood.
The answer is A) Permineralization. Petrified wood is formed through the process of permineralization where the organic material of the wood is replaced by minerals over time. This results in a fossilized replica of the original wood. Mold and cast preservation involve the creation of a negative and positive impression respectively, while impression preservation involves the direct impression of the organism onto a surface. Burrow preservation is when a trace fossil of an animal's burrow is left behind.
Learn more about Burrow preservation here: brainly.com/question/23172786
#SPJ11
PLEASE HELP FAST!!!
A country is at efficiency at point A. This country has been involved in a long war in which thousands of its young men and women died. Which PPC represents the economy after the war?
The point A is the PPC that represents the economy after the war
What is the PPCPPC, or Production Possibility Curve (also dubbed as the Production Possibility Frontier), is a graphical representation that discloses the limit of blend of two commodities which can be produced with restricted assets and technology in a particular society.
The PPC conveys the compulsory concessions that must be made when deciding to manufacture one item rather than another, thus emphasizing the concept of opportunity cost.
This curve is habitually diagrammed as a faintly-descending line where one good can be located on the X-axis, then correspondingly accompanied by the other good situated on the Y-axis.
Read more on PPC here:https://brainly.com/question/20995982
#SPJ1
Answer:
3rd green dot down
Which of the following is NOT a common site for deposition of sediment?
levee
cutbank
distributary system
floodplain
point bar
The feature that is NOT a common site for deposition of sediment is the cutbank. Levee, distributary system, floodplain, and point bar are all common sites for sediment deposition.
A cutbank is a feature found on the outer edge of a meandering river where the water flow is fastest and the erosion of the bank is occurring. The sediment is being carried away from the cutbank and deposited downstream, making it an erosional site rather than a depositional one. Levees, distributary systems, floodplains, and point bars are all common sites for deposition of sediment. Levees are ridges of sediment that form along the banks of a river during a flood event. Distributary systems are branching networks of smaller channels that distribute sediment into different areas. Floodplains are flat areas of land next to a river that are regularly flooded and covered with sediment. Point bars are formed on the inner edge of a meandering river where the flow is slower and sediment is deposited.
In contrast, a cutbank is a site of erosion rather than deposition. It is found on the outer bend of a river where the flow is faster, leading to the erosion of the bank and the removal of sediment.
To know more about Cutbank visit:
https://brainly.com/question/30663347
#SPJ11
The deadly gas that killed 1,700 people and 3,000 livestock near Lake Nyos, Cameroon, in 1986 was later identified as ______.
Answer:
Carbon Dioxide
Explanation:
Trust me its correct but for those who are hesitant
---> In 1986, possibly as the result of a landslide, Lake Nyos suddenly emitted a large cloud of CO2(Which is Carbon Dioxide), which suffocated 1,746 people and 3,500 livestock in nearby towns and villages, the most notable one being Chah, which was abandoned after the incident.
use a protractor to measure qrs also tel whether the angle is acute obtuse or right angle
To measure an angle using a protractor, one must follow these steps: Placing the protractor on the angle, with the base of the protractor aligned with one of the angle's sides and the center point of the protractor aligned with the vertex, the angle measurement from the protractor's scale is done.
An angle is formed when two rays or lines intersect at a common endpoint, known as the vertex. To measure an angle using a protractor, the protractor is placed on the angle with one of its sides aligned with one of the sides of the angle. The vertex of the angle should be located at the center of the protractor. The measurement of the angle is then read from the scale on the protractor. The measurement of the angle can be classified as acute, obtuse, or right, depending on its degree.
Learn more about the angles here.
https://brainly.com/question/17994692
#SPJ1
The geologic structure in which deformed rock layers on both sides of an axis dip towards each other is known as:
A. monocline
B. syncline
C. anticline
D. thrust fault
The geologic structure in which deformed rock layers on both sides of an axis dip towards each other is known as a syncline.
Geologic structures are features in the Earth's crust that result from various geologic forces, such as tectonic plate movement and volcanic activity.
A monocline is a type of fold in which rock layers are folded or tilted so that they slope downward in one direction. This creates a step-like structure in the rock layers.
A syncline is a type of fold in which rock layers are folded or tilted so that they slope downward in the middle, creating a trough-like structure.
An anticline is a type of fold in which rock layers are folded or tilted so that they slope upward in the middle, creating an arch-like structure.
A thrust fault is a type of fault in which rock layers are pushed up and over other rock layers along a fault line, often resulting in a steeply inclined fault plane.
learn more about monocline here:https://brainly.com/question/14093076
#SPJ11
Based on what you learned in this video what minerals make up Rhyolite?
In the video, it is explained that Rhyolite is a volcanic rock that is formed from the cooling and solidification of magma or lava. The minerals that make up Rhyolite are quartz, feldspar, and biotite.
Quartz is a mineral that is commonly found in igneous rocks and is composed of silicon and oxygen. Feldspar is another mineral commonly found in igneous rocks and is made up of aluminum, silica, and potassium or sodium. Biotite is a dark-colored mineral that is a member of the mica group and is made up of iron, magnesium, aluminum, silica, and oxygen. Rhyolite is a fine-grained rock that has a high silica content, which gives it a light color and a glassy texture. It is commonly found in volcanic regions and is often associated with explosive volcanic activity. Rhyolite is used in construction and as a decorative stone because of its attractive colors and textures. It is also used in the production of ceramics, glass, and other industrial materials. Overall, the minerals that make up Rhyolite play an important role in its physical properties and its uses.
Learn more about Rhyolite here
https://brainly.com/question/14333029
#SPJ11
take a moment to think about how the colorado river has evolved through time. focus on how changing base level and stream incision created landforms, such as incised meanders and rincons, and arrange these events accordingly.
Rank from oldest to youngest. Reset Help A stream migrates laterally across its A rincon forms by the cutoff of an floodplain developing meanders. Thislowered by crustal uplift and the river stream terminates at a lake, which is its base level. The base level of the stream is incised meander, which shortens the river. begins to incise downward. Incised meanders form. Oldest Event Youngest Event Submit My Answers Give Up
Taking a moment to think about how the Colorado River has evolved through time, let's focus on how changing base level and stream incision created landforms, such as incised meanders and rincons, and arrange these events accordingly from oldest to youngest:
1. A stream migrates laterally across its floodplain, developing meanders. This is the initial stage where the stream is flowing across a relatively flat surface and begins to create sinuous curves.
2. The base level of the stream is lowered by crustal uplift and the river begins to incise downward. As the base level drops, the stream starts to cut deeper into the underlying rock, creating incised meanders.
3. Incised meanders form as a result of the river cutting into the bedrock. These are the deep, curving channels that are seen in the landscape after the stream has cut down into the rock.
4. A rincon forms by the cutoff of an incised meander, which shortens the river. This occurs when the river erodes through the narrow neck of a meander, bypassing the curve and leaving the abandoned channel as a rincon.
To recap, the order of events from oldest to youngest is:
1. A stream migrates laterally across its floodplain, developing meanders.
2. The base level of the stream is lowered by crustal uplift, and the river begins to incise downward.
3. Incised meanders form.
4. A rincon forms by the cutoff of an incised meander, which shortens the river.
To read more about Colorado River click here
https://brainly.com/question/13556556
#SPJ11
1. A stream migrates laterally across its floodplain developing meanders. 2. A rincon forms by the cutoff of an incised meander, which shortens the river. 3. The base level of the stream is lowered by crustal uplift and the river begins to incise downward. 4. Incised meanders form.
So, the events arranged from oldest to youngest are:
A stream migrates laterally across its floodplain developing meanders. A rincon forms by the cutoff of an incised meander, which shortens the river. The base level of the stream is lowered by crustal uplift and the river begins to incise downward. Incised meanders form.
Oldest Event to Youngest Event:
1. A stream migrates laterally across its floodplain, developing meanders.
2. The base level of the stream is lowered by crustal uplift, and the river begins to incise downward.
3. Incised meanders form as the river continues to cut deeper into the landscape.
4. A rincon forms by the cutoff of an incised meander, which shortens the river.
5. The stream terminates at a lake, which is its new base level.
To learn more about floodplain click here
brainly.com/question/17366465
#SPJ11
NEED HELP NOW!!!!! 15 POINTS!!!!!
Read this excerpt about Qin Shi Huang, the founder of the Qin dynasty. Then answer the question that follows.
The Qin dynasty lasted for a brief period of 15 years. Emperor Qin founded the empire by unifying all warring states. Qin ruled with absolute control. He also added greatly to China’s progress. He started the construction on the Great Wall of China and the Grand Canal. He also had other roads built to boost China’s trade.
Which of the following can be concluded about Emperor Qin Shi Huang’s governing methods?
Select all the correct answers.
His rule lasted for only a short time because he became ill and died.
He built the Great Wall to set an example for other governments.
His rule ended after only 15 years because his army revolted against him.
He used Legalism to unify the empire of China.
He believed that economic progress is the true mark of a successful empire.
Answer:He believed that economic progress is the mark of a successful empire.
Explanation: