The oxoacid of the nitrate ion is called ___ while that of the nitrite ion is called ___

Answer:

BaF₂ when it dissolves, dissociates as follows;

BaF₂ --> Ba²⁺ + 2F⁻Molar solubility is the number of moles that can be dissolved in 1 L of solution.
If molar solubility of BaF₂ is x, then molar solubility of Ba²⁺ is x and solubility of

F⁻ is 2x.ksp = [Ba²⁺][F⁻]²ksp = (x)(2x)²2.45 x 10⁻⁵ = 4x³x³ = 0.6125 x 10⁻⁵x = 0.0183 mol/L is molar solubility of BaF₂ -blahblahmali

Explanation:

The portable reference electrode commonly used for measurements in seawater is the SCE (Saturated Calomel Electrode). The SCE has a stable and reproducible potential,

which makes it ideal for use in harsh environments such as seawater. It is easy to use and can provide accurate measurements of various parameters in seawater, including pH, conductivity, and redox potential. Additionally, SCEs have a long shelf life, making them a cost-effective option for fieldwork. Overall, the SCE is a reliable and convenient choice for reference electrode in seawater measurements

Learn more about Portable Reference Electrode here:

https://brainly.com/question/31725992

#SPJ11

In a triprotic acid, Ka1 has the highest value. The correct option is A). The [H₃O⁺] in a 0.265 M HClO solution is approximately 8.8 * 10⁻⁵ M. The correct option is E.

In a triprotic acid, Ka1 has the highest value. Triprotic acids are acids that have three acidic protons that can dissociate in solution. The dissociation of these protons occurs in a stepwise manner, with each step having a unique equilibrium constant (Ka1, Ka2, Ka3). Typically, the first dissociation step (Ka1) has the highest equilibrium constant, meaning it is the most acidic proton and has the greatest tendency to dissociate. As the dissociation process progresses to Ka2 and Ka3, the successive protons are less acidic and have lower equilibrium constants.

To determine the [H₃O⁺] in a 0.265 M HClO solution with a Ka of 2.9 * 10⁻⁸, we can use the following formula:

Ka = ([H₃O⁺][ClO⁻]) / [HClO]

Let x = [H₃O⁺], then [ClO⁻] = x and [HClO] = 0.265 - x. Since x is much smaller than 0.265, we can approximate [HClO] ≈ 0.265.

[tex]2.9 * 10^{-8} = (x^2) / 0.265x^2 = 2.9 * 10^{-8} * 0.265x = \sqrt{(7.685 * 10^{-9})[/tex]

x ≈ [tex]8.8 * 10^{-5} M[/tex]

Therefore, the [H₃O⁺] in a 0.265 M HClO solution is approximately [tex]8.8 * 10^{-5} M[/tex] (option E).

To know more about triprotic acid, refer to the link below:

https://brainly.com/question/22556713#

#SPJ11

The advantage of a galvanic anode system in soil compared to an impressed current system, as listed in a written examination, is that no external power is required. Galvanic anode systems rely on the natural electrochemical reaction between the anode material and the soil to provide protection against corrosion, while impressed current systems require an external power source to drive the protection.

This can make galvanic anode systems more cost-effective and simpler to install and maintain. The other options listed in the question (current adjustability, suitability for high resistivity soil, and high current capacity) are not advantages of galvanic anode systems in comparison to impressed current systems.

A galvanic anode, or sacrificial anode, is the main component of a galvanic cathodic protection system used to protect buried or submerged metal structures from corrosion.

Galvanic protection consists of applying a protective zinc coating to the steel to prevent rusting. The zinc corrodes in place of the encapsulated steel. These systems have limited life spans. The sacrificial anode protecting the underlying metal will continue to degrade over time.

TO KNOW MORE ABOUT  a galvanic anode system CLICK THIS LINK -

brainly.com/question/29784727

#SPJ11

Answer: Wrote the answers below

Explanation:

The balanced equation for Number 1 is:

Fe2O3(s) + 3H2(g) --> Fe(s) + 3H2O(l)

Step 1:

moles ratio of iron (III) oxide and hydrogen is 1:3

step 2:

work out mr (molar mass) of fe2o3: 111.68+ 48 = 159.68

moles of  iron (III) oxide: 33.5g  divided by 159.68 = 0.21 mol

Step 3:

1:3 ratio so 0.21 times 3 = 0.63 mol of hydrogen

Step 4:

mass of hydrogen = mol times mr

0.63 times 2 = 1.26g

mass of hydrogen = 1.26g or 1.27g depending on whether you used 1.00 or 1.01 for the mr of hydrogen

To solve this problem, we can use the ideal gas law: PV = n RT, First, we need to find the number of moles of methane gas present. We can use the molar mass of methane (16.04 g/mol) to convert from mass to moles:

0.20 g CH4 x (1 mol CH4 / 16.04 g CH4) = 0.0125 mol CH4
Next, we can rearrange the ideal gas law to solve for volume:
V = (nRT) / P
where n is the number of moles, R is the gas constant (0.0821 L·atm/mol·K), T is the temperature in Kelvin, and P is the pressure in atmospheres.
Plugging in the values we have:
V = (0.0125 mol) x (0.0821 L·atm/mol·K) x (312 K) / (2.00 atm) = 0.156 L
To round to two significant figures, we look at the digit in the hundredths place (5) and round up if it is 5 or greater. Therefore, the final answer is:
V = 0.16 L

To determine the volume that 0.20 g methane gas (CH4) occupies at 312 K and 2.00 atm, you can use the Ideal Gas Law equation: PV = nRT, where P is pressure, V is volume, n is the number of moles, R is the ideal gas constant (0.0821 L atm/mol K), and T is temperature.
1. First, convert the mass of methane to moles by dividing it by its molar mass (CH4 = 12.01 g/mol for C + 4 × 1.01 g/mol for H = 16.04 g/mol):
n = 0.20 g / 16.04 g/mol = 0.0125 mol (rounded to four significant figures)
2. Rearrange the Ideal Gas Law equation to solve for volume: V = nRT/P
3. Plug in the values:
V = (0.0125 mol) × (0.0821 L atm/mol K) × (312 K) / (2.00 atm)
4. Calculate the volume:
V = 0.319 L
The volume of 0.20 g methane gas (CH4) at 312 K and 2.00 atm is 0.32 L.

Visit here to learn more about  ideal gas law:

brainly.com/question/28257995

#SPJ11

The concerns over chemical hazards and the need to identify hazardous chemicals in the workplace led to the creation of the "right-to-know" laws. These laws require employers to inform employees about the hazardous chemicals they may come into contact with while working.

The right-to-know laws also require employers to keep records of hazardous chemicals used in the workplace and make them available to employees and government agencies upon request. The goal of these laws is to empower employees with knowledge about the chemicals they work with and the potential risks associated with them. This allows employees to take appropriate precautions and protect themselves from harm. The right-to-know laws are an important aspect of workplace safety and have helped to reduce the number of workplace injuries and illnesses caused by exposure to hazardous chemicals. In summary, the right-to-know laws were enacted due to the need to protect workers from chemical hazards, to identify hazardous chemicals in the workplace, and to require supervisors to inform employees of the chemicals they might be exposed to.

learn more about chemical here

https://brainly.com/question/29039149

#SPJ11

The assumption built into the TWA (time-weighted average) value with regard to years of exposure is that the exposure to the content loaded in a particular environment is spread out over a working career, which typically spans around 30 years.

Therefore, the TWA value is based on an average exposure over a period of time, assuming that an individual will work in that environment for a full career length. However, it should be noted that TWA values may vary depending on the specific type of content being measured and the associated health risks.

The assumption built into the Time Weighted Average (TWA) value with regard to years of exposure is "A working career." This typically means that the TWA value is calculated based on a worker's exposure to a substance or hazard over a 40-hour work week for a duration of approximately 30 years, which is considered a standard working career.

Learn more about health risks at: brainly.com/question/12280232

#SPJ11

The correct form for the half-life expression for a second-order reaction is: t1/2 = 1 / k[A]₀

In a second-order reaction, the rate of the reaction is proportional to the square of the concentration of the reactant:

rate = k[A]²

where k is the rate constant and [A] is the concentration of the reactant.

We must ascertain how long it takes for half of the reactant's initial concentration to be consumed in order to calculate the reaction's half-life. The reactant's concentration ([A]) is equal to half its starting concentration ([A]0) at the half-life:

[A] = 1/2 [A]₀

This results when this is substituted into the second-order rate equation:

[tex]rate = k(1/2 [A]₀)²[/tex]

[tex]rate = k[A]₀² / 4[/tex]

Solving for k, we get:

[tex]k = 4 rate / [A]₀²[/tex]

Substituting k into the second-order rate equation gives:

[tex]rate = (4 rate / [A]₀²) [A]²[/tex]

[tex]rate = 4 rate [A]² / [A]₀²[/tex]

[tex][A] / [A]₀² = (1 / 4) t[/tex]

where t is the reaction time.

At the half-life, [A] / [A]₀ = 1/2, so we can substitute this into the above equation to obtain:

[tex](1/2) [A]₀² / [A]₀² = (1 / 4) t1/2[/tex]

Simplifying this gives:

[tex]t1/2 = 1 / k[A]₀[/tex]

Therefore, the correct form for the half-life expression for a second-order reaction is t1/2 = 1 / k[A]₀.

For such more question on reaction:

https://brainly.com/question/24795637

#SPJ11

A naturally occurring, inorganic substance with a characteristic chemical composition and usually a characteristic crystal structure is known as a mineral. Minerals are essential building blocks of rocks and play a vital role in the Earth's crust.

They are composed of atoms arranged in a specific order, which determines their unique physical and chemical properties.
The chemical composition of a mineral refers to the types and relative proportions of elements that make up the mineral. Minerals can be composed of a single element, such as native copper, or they can be complex, containing multiple elements. The chemical composition of a mineral is often expressed as a chemical formula, which shows the elements present and their relative proportions.
The crystal structure of a mineral refers to the arrangement of atoms within the mineral's lattice. The crystal structure of a mineral is determined by the way in which the atoms are bonded together. Some minerals have simple crystal structures, while others have complex ones. The crystal structure of a mineral affects its physical properties, such as its hardness, colour, and cleavage.
In conclusion, minerals are naturally occurring, inorganic substances with a characteristic chemical composition and usually a characteristic crystal structure. They are important components of rocks and play a crucial role in the functioning of the Earth's crust. Understanding the chemical composition and crystal structure of minerals is essential in determining their physical and chemical properties, which can be useful in a variety of scientific and industrial applications.

To learn more about inorganic substance, refer:-

https://brainly.com/question/30282407

#SPJ11

You with writing ionic compound formulas. An ionic compound consists of a positive ion (cation) and a negative ion (anion) bonded together through electrostatic forces. To write the formula of an ionic compound, you need to balance the charges of the cation and anion to ensure the compound is neutral.

In your example, you have a sodium ion (Na+) and a fluoride ion (F-). The sodium ion has a positive charge of +1, while the fluoride ion has a negative charge of -1. To write the formula for the ionic compound formed by these two ions, you simply combine them in a way that balances their charges. Since the charges are already equal and opposite, you just need to put them together:
Na+ & F- → NaF
The resulting ionic compound is sodium fluoride (NaF). To write formulas for other ionic compounds, follow the same process:
1. Identify the cation and anion involved.
2. Determine the charges of each ion.
3. Balance the charges by adjusting the number of ions as needed.
4. Write the formula, placing the cation first followed by the anion.
Remember to always ensure that the charges are balanced, and the resulting compound is neutral. This method will allow you to write ionic compound formulas effectively.

Learn more about ionic compound here

https://brainly.com/question/28759239

#SPJ11

In a double covalent bond, two atoms share two pairs of electrons.  

There are a total of four electrons in the bond since each atom contributes one electron to each of the two pairs that are shared.

By sharing these electrons, the two atoms form a solid link that is crucial for the formation of numerous types of molecules, including organic compounds.

Many molecules, including ethene (C2H4) and carbon dioxide (CO2), have double bonds, which are crucial in establishing the chemical and physical characteristics of these substances.

Generally speaking, the stronger the link and the harder it will be to break the bond, the more electrons that two atoms share.

For such more question on electrons:

https://brainly.com/question/371590

#SPJ11

This is an exercise in the Combined Gas Law, also known as the Boyle-Mariotte-Charles-Gay-Lussac Law, it is one of the fundamental laws of physics that describes the behavior of gases under ideal conditions. This law states that, in an ideal gas, if the amount of gas and the temperature are held constant, the pressure and volume of the gas are inversely proportional. Furthermore, if the amount of gas and the pressure are held constant, the volume and temperature of the gas are directly proportional. Finally, if the amount of gas and the volume are held constant, the pressure and temperature of the gas are directly proportional.

The Combined Gas Law is expressed mathematically by the formula (P₁V₁)/T₁ = (P₂V₂)/T₂.

Where:

P₁ = Initial pressure

V₁ = Initial volume

T₁ = Initial temperature

P₂ = Final pressure

V₂ = Final volume

T₂ = Final temperature

This formula can be used to predict changes in the volume, pressure, and temperature of an ideal gas in a closed system when one of these variables is altered while the others are held constant.

The Combined Gas Law has applications in many fields of physics, chemistry, and engineering. For example, it can be used to predict the behavior of gases in combustion processes, to design ventilation systems in buildings, or to understand the dynamics of gases in the Earth's atmosphere. Furthermore, this law is essential for understanding other important concepts in thermodynamics, such as entropy and the internal energy of gases.

We have to:

V₁ = 1.00L

T₁ = 135°C + 273 = 408 K

P₁ = 844 mmHg

V₂ = ?

T₂ = 14°C + 273 = 287 K

P₂ = 748 mmHg

Very well, we already have our data in order, this is one more step in the solution.

(P₁V₁)/T₁ = (P₂V₂)/T₂

As you ask, what is the volume if the conditions change to 14° Cy 748 mm Hg?

We clear for the final volume, which is the value to be calculated.

V₂ = (P₁V₁T₂)/(P₂T₁)

Now we substitute our data and simplify, then

V₂ = (P₁V₁T₂)/(P₂T₁)

V₂ = (844 mmHg × 1.00 L × 287 K)/(748 mmHg × 408 K)

V₂ = (242228 L)/(305184)

V₂ = 0.79 L

If the conditions change to 14 °C and 748 mmHg, the new volume is 0.79 Liters.

ヘ( ^o^)ノ＼(^_^ )If you want to learn more about chemistry, I share this link to complement your learning:

https://brainly.com/question/31676714

In a system at equilibrium, the forward and reverse reactions are occurring at equal rates. This means that the concentration of reactants and products is stable and no net change is observed. However, if a reactant is added to the system, the equilibrium is disrupted and the system is no longer at equilibrium.

The Le Chatelier's Principle states that when a system at equilibrium is disturbed, the system will shift in a way that opposes the change. In the case of adding a reactant, the system will shift towards the products in order to consume the added reactant and restore equilibrium. This is because the increase in reactant concentration is seen as a stress on the system and the system will respond by reducing that stress.
Conversely, if a product is added to the system, the system will shift towards the reactants to consume the added product and restore equilibrium. The system will always try to minimize the effect of the disturbance on the equilibrium.
It is important to note that the extent of the shift in equilibrium will depend on the relative concentrations of the reactants and products, as well as the equilibrium constant of the reaction. The system will shift in a way that minimizes the disturbance while still maintaining the equilibrium constant.
In conclusion, when a reactant is added to a system at equilibrium, the system will shift towards the products to oppose the change and restore equilibrium. The same principle applies when a product is added, with the system shifting towards the reactants.

for more such questions on  equilibrium

https://brainly.com/question/19340344

#SPJ11

The answer C less active (or more noble) than hydrogen. This is because copper has a lower tendency to lose electrons and form cations compared to hydrogen. In other words, copper is a relatively stable element that is not as easily oxidized as hydrogen.

They can be seen in the electrochemical series, which ranks elements according to their tendency to undergo oxidation or reduction reactions. Hydrogen is located higher up on the series, indicating that it is more reactive and has a greater tendency to lose electrons and form cations. On the other hand, copper is located lower down on the series, indicating that it is less reactive and has a lower tendency to undergo oxidation. It is worth noting that copper can still undergo oxidation reactions under certain conditions. For example, when exposed to air and moisture, copper can slowly react to form copper oxide. Additionally, copper can be used as an anode in certain electrochemical cells, indicating that it is more anodic than some other metals. However, in general, copper is considered to be a relatively stable and unreactive element, particularly compared to hydrogen.

learn more about copper here.

https://brainly.com/question/13677872

#SPJ11

"The information that should be included on a label for a peroxide-forming chemical is - Date received, date opened, and date to discard".

The information that should be included on a label for a peroxide-forming chemical is the date received, date opened, and date to discard. This information is essential to ensure the safe handling and storage of the chemical.

It is important to keep track of when the chemical was received, as well as when it was opened, in order to determine its shelf life and prevent any potential hazards.

Additionally, including the date to discard on the label ensures that the chemical is not used beyond its safe and effective period.

Visit here to learn more about Chemicals:

brainly.com/question/29886197

#SPJ11

Compounds are molecules that are made of more than one element. Therefore the correct option is option E.

These bonds are the result of electron sharing or electron transfer between the atoms of the various components involved.

A compound has a special set of chemical and physical characteristics that set it apart from the characteristics of the elements that make up the compound.

The laws of chemical reactions, which specify that atoms must join in such a way as to achieve a stable, low-energy state, regulate the creation of compounds.

The type and strength of the bonds holding the atoms together, as well as the molecule's geometry, determine the chemical properties of compounds. Therefore the correct option is option E.

For such more question on Compounds:

https://brainly.com/question/27802265

#SPJ11

To calculate the fraction of crotonic acid that is in the dissociated form in the aqueous solution, This means that 0.36% of crotonic acid is in the dissociated form in the aqueous solution.

We need to know the dissociation constant (Ka) of crotonic acid.

According to the ALEKS data resource, the Ka value for crotonic acid is 1.3 x 10⁻⁵.
Next, we can use the equation for the dissociation of a weak acid:
Ka = [tex]\frac{[H+][A-]}{[HA]}\\[/tex]
where [H+] is the concentration of hydrogen ions, [A-] is the concentration of the conjugate base (crotonate ions), and [HA] is the concentration of the weak acid (crotonic acid).
We can assume that the concentration of crotonic acid is equal to the total concentration of the solution (since it's the only solute), and we can also assume that the concentration of hydrogen ions is negligible (since the solution is aqueous). Therefore, we can simplify the equation to:
[tex]Ka=\frac{[A-]}{[HA]} \\\\[/tex]
Rearranging this equation, we get:
[tex]\frac{[A-]}{[HA]} =Ka[/tex]
Taking the square root of both sides, we get:
[tex]\frac{[A-]}{[HA]} =\sqrt{Ka}[/tex]
Plugging in the Ka value for crotonic acid, we get:
    = √1.3 x 10⁻⁵
     = 0.0036

Learn more about dissociation constant here

https://brainly.com/question/28197409

#SPJ11

1. Collect data on the rate constants (k) of the reaction at various temperatures, (2) Take the natural logarithm of the Arrhenius equation to obtain a linear equation: ln(k) = ln(A) - Ea/RT.

3. Plot ln(k) vs 1/T and determine the slope of the line. 4. Use the slope and the gas constant (R) to calculate the activation energy (Ea) using the equation: Ea = -slope x R. 1. Rearrange the Arrhenius equation to isolate Ea: ln(k) = ln(A) - (Ea / RT), (2). Determine the rate constants (k) at two different temperatures (T1 and T2) from experimental data.

3. Substitute the known values of k, R (gas constant), and T into the equation for each temperature: ln(k1) = ln(A) - (Ea / R * T1), ln(k2) = ln(A) - (Ea / R * T2), 4. Subtract the first equation from the second to eliminate A: ln(k2 / k1) = Ea / R * (1/T1 - 1/T2) 5. Rearrange the equation to solve for Ea: Ea = R * ln(k2 / k1) / (1/T1 - 1/T2) 6. Calculate the activation energy (Ea) by plugging in the known values of k1, k2, T1, T2, and R into the final equation.

To know more about temperatures click here

brainly.com/question/30074492

#SPJ11

If too much NaOH is added during the titration and the color of the solution turns dark pink, it would result in an error in the calculation of the molar mass of the substance being titrated.

The endpoint of the titration is indicated by the change in color of the solution from colorless to faint pink, which means that the amount of NaOH added to the solution has reacted completely with the substance being titrated. However, if too much NaOH is added and the solution turns dark pink, it means that the reaction has gone beyond the endpoint, resulting in excess NaOH being present in the solution. This would mean that the amount of NaOH used in the calculation of the molar mass would be higher than the true value, leading to an overestimation of the molar mass. Therefore, the correct answer to this question is that the calculated molar mass would be higher than the true value if too much NaOH was added and the color of the solution turned dark pink. It is important to note that accurate titration requires careful attention to detail and precision in the measurement of volumes, and any deviations from the correct procedure can lead to errors in the results obtained.

for more such questions on titration

https://brainly.com/question/13031875

#SPJ11

Alka-Seltzer contains three main components: sodium bicarbonate (NaHCO3), citric acid (C6H8O7), and acetylsalicylic acid (C9H8O4). .

According to the manufacturer, Alka-Seltzer contains about 325 mg of sodium bicarbonate, 1000 mg of citric acid, and 325 mg of acetylsalicylic acid per tablet. Assuming that 1 gram of Alka-Seltzer is equivalent to one tablet, we can calculate the approximate percentage of each component as follows:

- Sodium bicarbonate: (325 mg / 1000 mg) x 100% = 32.5%
- Citric acid: (1000 mg / 1000 mg) x 100% = 100%
- Acetylsalicylic acid: (325 mg / 1000 mg) x 100% = 32.5%

Using these percentages, we can make an educated guess about the limiting reactant. Since there is an equal amount of sodium bicarbonate and acetylsalicylic acid in Alka-Seltzer (both at 32.5%), and since citric acid is present in a larger amount (at 100%), it is possible that citric acid could be the limiting reactant.

However, without more precise information about the percentages of each component in Alka-Seltzer, we cannot determine the limiting reactant with certainty.

It's worth noting that even if we did know the exact percentages of each component in Alka-Seltzer, there could be other factors that affect the limiting reactant, such as the temperature and pressure of the reaction. Additionally, the reaction may not proceed according to the balanced equation in a real-world scenario.

To know more about alka-seltzer : https://brainly.com/question/10684030

#SPJ11

1.  The 4s subshell should be filled before the 3d subshell because the 4s subshell is at lower energy than the 3d subshell.

Electrons fill the subshells in order of increasing energy.

2.  To write the electron configuration for the Na^+ ion, which has ten electrons, follow these steps:
  a. Begin with the lowest energy subshell, which is 1s.
  b. Fill the subshells with electrons in increasing energy order: 1s, 2s, 2p, 3s, and so on.
  c. Stop when you've added ten electrons.
The electron configuration for the Na^+ ion is: 1s^2 2s^2 2p^6

3. To write the electron configuration for the Br^- ion, which has thirty-six electrons, follow the same steps as above, but stop when you've added thirty-six electrons.

The electron configuration for the Br^- ion is: 1s^2 2s^2 2p^6 3s^2 3p^6 4s^2 3d^10 4p^6

To know more about electronic configuration, visit: https://brainly.com/question/30424681

#SPJ11

The general order of decreasing strength for intermolecular forces is: c. ion-dipole, b. hydrogen bonding, a. dipole-dipole, and d. London dispersion.

Intermolecular forces are forces between molecules. Ion-dipole forces are the strongest, as they involve charged ions interacting with a polar molecule.

Hydrogen bonding, a specific type of dipole-dipole interaction, occurs when hydrogen atoms are bonded to highly electronegative atoms like fluorine, oxygen, or nitrogen. Dipole-dipole forces are interactions between polar molecules.

Lastly, London dispersion forces are the weakest and are present in all molecules, resulting from temporary fluctuations in electron distribution.

Hence,  The intermolecular forces, in order of decreasing strength, are ion-dipole, hydrogen bonding, dipole-dipole, and London dispersion forces.

learn more about intermolecular forces click here:

https://brainly.com/question/2193457

#SPJ11

In a nuclear fusion reaction, the product has a greater mass than the reactants.

Nuclear power generation relies on massive releases of energy made achievable through either nuclear fusion or fission techniques; however, understanding these methods reveals some distinctive lines between them.

Nuclear fusion occurs when the combination of light-weight atoms results in denser nuclei production and intense quantities of heat expulsion.

In contrast to that process is the scale-breaking act known as fission whereby high-density elements such as Uranium undergo chain-splitting requiring intricate triggering mechanisms for energy liberation.

Learn about Nuclear fission here https://brainly.com/question/3992688

#SPJ1

Based on the given chemical equation: 2KClO₃ → KCl + 3O₂, There are 2 K (potassium) atoms on the left side (2KClO₃), and 1 K atom on the right side (KCl), There are 6 Cl (chlorine) atoms on the left side (2KClO₃), and 1 Cl atom on the right side (KCl), There are 6 O atoms on the left side (2KClO₃), and 6 O atoms on the right side (3O₂), and No, the equation above is not balanced because the number of atoms of each element is not equal on both sides of the equation.

There are 2 potassium atoms on the left side of the equation, since each formula unit of potassium chlorate (KClO₃) contains one potassium atom, and the coefficient "2" in front of KClO₃ indicates that there are 2 moles of KClO₃. There is 1 potassium (K) atom on the right side of the equation, since each formula unit of potassium chloride contains one potassium atom, and the coefficient "1" in front of KCl indicates that there is 1 mole of KCl.

There are 6 chlorine atoms on the left side of the equation, since each formula unit of potassium chlorate (KClO₃) contains one chlorine atom, and the coefficient "2" in front of KClO₃ indicates that there are 2 moles of KClO₃. There is 1 chlorine (Cl) atom on the right side of the equation, since each formula unit of potassium chloride (KCl) contains one chlorine atom, and the coefficient "1" in front of KCl indicates that there is 1 mole of KCl.

There are 6 oxygen (O) atoms on the left side of the equation, since each formula unit of potassium chlorate (KClO₃) contains three oxygen atoms, and the coefficient "2" in front of KClO₃ indicates that there are 2 moles of KClO₃. There are 6 oxygen (O) atoms on the right side of the equation, since each formula unit of oxygen gas (O₂) contains two oxygen atoms, and the coefficient "3" in front of O₂ indicates that there are 3 moles of O₂.

No, the equation above is not balanced. The coefficients in front of the chemical species are not providing an equal number of atoms of each element on both sides of the equation, indicating an unbalanced equation.

To know more about chlorine atoms here

https://brainly.com/question/20834469

#SPJ1

The total number of moles NH3 is 1.00 mole, under the condition that the reaction is of 14. 0 g N2.

The given balanced chemical equation for the reaction of nitrogen gas (N2) and hydrogen gas (H2) to form ammonia gas (NH₃) is
N₂(g) + 3H₂(g) → 2NH₃(g)

The molar mass of N₂ is 28.01 g/mol. To evaluate the number of moles of N₂ in 14.0 g of N₂ we divide the mass by the molar mass
Number of moles of N₂ = Mass of N₂ / Molar mass of N₂
Number of moles of N₂ = 14.0 g / 28.01 g/mol
Number of moles of N₂ = 0.4998 mol

Then, the number of moles of NH3 that would form from the complete reaction of 14.0 g N2 can be evaluated
Number of moles of NH₃ = Number of moles of N₂ × (2 moles NH₃ / 1 mole N₂)
Number of moles of NH₃ = 0.4998 mol × (2 mol NH₃ / 1 mol N₂)
Number of moles of NH₃ = 0.9996 mol

Hence, approximately 1.00 mole of NH₃ would form from the complete reaction of 14.0 g N₂.

To learn more about molar mass
https://brainly.com/question/837939
#SPJ4

The wavelength of a 2.99 Hz wave is approximately 114.38 meters.

To determine the wavelength of a wave, you need to know the wave's frequency (in hertz, Hz) and the speed of the wave. The relationship between wavelength (λ), frequency (f), and speed (v) is given by the equation:

v = λ * f

Where:

v = speed of the wave (in meters per second, m/s)

λ = wavelength of the wave (in meters, m)

f = frequency of the wave (in hertz, Hz)

Substituting the given frequency of 2.99 Hz into the formula, we get:

wavelength = 343 m/s / 2.99 Hz

wavelength = 114.38 meters

Therefore, the wavelength of a 2.99 Hz wave is approximately 114.38 meters.

Learn more about wavelength ,

https://brainly.com/question/31143857

#SPJ4

The enthalpy change for the reaction is -114.2 kJ for the formation of 2 moles of [tex]\mathrm{NO_2}$.[/tex] Therefore, the correct answer is (C) -342.6 kJ.

The given thermochemical equation is:

[tex]\begin{equation}2\mathrm{NO}(g) + \mathrm{O}_2(g) \rightarrow 2\mathrm{NO}_2(g)\end{equation}[/tex]

[tex]\begin{equation}\Delta H = -114.2\mathrm{kJ}\end{equation}[/tex]

This means that for every 2 moles of NO reacted and 1 mole of [tex]\mathrm{O_2}$.[/tex] reacted, 2 moles of [tex]\mathrm{NO_2}$.[/tex] are produced with a change in enthalpy of -114.2 kJ.

To find the change in enthalpy for the given mass of [tex]\mathrm{NO_2}$.[/tex](138.03 g), we need to first calculate the number of moles of [tex]\mathrm{NO_2}$.[/tex] produced.

The molar mass of [tex]\mathrm{NO_2}$.[/tex] is:

[tex]\begin{equation}\mathrm{M}( \mathrm{NO_2}) = 14.01\mathrm{g/mol} + 2 \times 16.00\mathrm{g/mol} = 46.01\mathrm{g/mol}\end{equation}[/tex]

The number of moles  [tex]\mathrm{NO_2}$.[/tex] produced is therefore:

n(NO2) = mass/M(NO2) = 138.03 g / 46.01 g/mol = 3.00 mol

According to the stoichiometry of the equation, 2 moles of [tex]\mathrm{NO_2}$.[/tex] are produced for every 2 moles of NO and 1 mole of . This means that the number of moles of NO  [tex]\mathrm{O_2}$.[/tex] required to produce 3.00 moles of [tex]\mathrm{NO_2}$.[/tex]are:

n(NO) = n([tex]\mathrm{O_2}$.[/tex]) = (2/2) * 3.00 mol = 3.00 mol

The change in enthalpy for the production of 3.00 moles of [tex]\mathrm{O_2}$.[/tex] is:

ΔH = nΔH° = 3.00 mol * (-114.2 kJ/mol) = -342.6 kJ

Therefore, the correct answer is (C) -342.6 kJ.

Learn more about stoichiometry

https://brainly.com/question/30215297

#SPJ4

Answer:

limitting reactant = 7.79g

excess reactant = 16.517g

percentage yild =145.05%

Explanation:

you can read and understand from the image okey