Answer:
C.
Explanation:
the closer you get to the centre of an object the greater its gravitational pull- A is correct
If the radius increases the gravity decreases and rise versa - B is correct
the answer is C
The force of gravity acting on you will increase if you stand on a planet with a radius that is shrinking. So, option (B) is orrect.
What is force?
Force is an external agent that has the power to alter a body's resting or moving condition. It has a size and a movement. The direction of the force is referred to as the force's direction, and the application of force is the place at which the force is applied.
The force of gravity acting on an object due to a planet is given by: F = GMm/R².
Where, G is universal gravitational constant . M and m is masses of the planet and the object respectively and R is distance between them.
Hence, when you stand on a planet with a radius that is shrinking; distance between you and planet decreases. So, the force of gravity acting on you will increase. So, option (B) is correct.
But in the case of burrow deep inside the planet: gravitational force due to outer shell becomes zero. So, effective gravitational force decreases.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ2
A baseball is thrown horizontally with a velocity of 44 m/s. It travels a horizontal distance of 18
m to the plate before it is caught. How long does the ball stay in the air?
A.0.41 sec
B.41 sec
C.4.1 sec
D.4 sec
Answer:
a 0.41
plug number into equation
A horizontal baseball pitch is launched at 44 m/s. The ball will stay for 4.1 sec (approx) in the air. Hence, option C is correct.
What is Velocity?The rate at which an object's position changes when observed from a specific point of view and when measured against a specific unit of time is known as its velocity.
Its SI unit is represented as m/s, and it is a vector quantity, it means that it has both magnitude and direction.
According to the question, the given values are :
Initial Velocity, u = 44 m/s,
Distance travelled, s = 18 m and,
Final velocity, v = 0.
Use equation of motion :
v = u + at
0 = 44 + (-9.8)t
t = 44 / 9.8
t = 4.3 (approx)
Hence, the time for which the ball stay in the air is 4.1 sec (approx).
To get more information about velocity :
https://brainly.com/question/13372043
#SPJ2
Dr. Metallica wants to change the property of an alloy? How could she do this? SELECT ALL THAT APPLY.
A. She could heat the alloy enough that it is malleable.
B. She could change the metal(s) used in the alloy.
C. She could change the nonmetal(s) used in the alloy.
D. She could change the percentages of the elements used in the alloy.
Answer:
METALLICA = HOT BAND
Explanation:
The answer is a, you're welcome babes
Answer: A B D
Explanation:
how can voltage be produced by magnetism and motion?
Answer:
Electromagnetic Induction by a Moving Magnet
Then the action of moving a coil or loop of wire through a magnetic field induces a voltage in the coil with the magnitude of this induced voltage being proportional to the speed or velocity of the movement.
Explanation:
How does temperature effect density and the flow of convection currents?
Answer:
Convection
Explanation:
Convection is heat transfer due to a density differential within a fluid. As water's temperature increases in the presence of a heat source, it will become less dense and rise. As it moves up and away from the heat source, it cools and becomes more dense and sinks.
Sean and Tommy are debating the positive and negative impacts of technology on environmental quality. Tommy is listing the negative impacts. Which of the following would help his argument? (2 points)
Grupp av svarsalternativ
Solar panels have become more effective due to technological improvements.
Technology has helped make recycling to be more efficient.
It has created new ways to clean up oil spills.
Factories contribute to air and water pollution.
Answer:
Factories contribute to air and water pollution.
Explanation:
Regular exercise can:
A.
Reduce stress and anxiety
B.
Boost your immune system
C.
Increase your overall feeling of wellness
D.
All of the above
Answer:
D
Explanation:
11. How fast will a pebble be traveling 3 seconds after being dropped? (g = 9.8 m/s2)
A.-9.8 m/s
B.29.4 m/s
C.9.8 m/s2
D.29.4 m/s
Ken Griffey, Jr's warehouse shot in the 1933 home run derby travelled 93 feet per second for 5 seconds. How far did he hit the ball?
Answer:
465 feet because 93*5 = 465, btw that was 1993 not 1933
Explanation:
1000 kg car takes travels on a circular track having radius 100 m with speed 10 m/s. What is the minimum coefficient of static friction between tires and track needed to keep the car on circular path. *
A- 0.01
B- 0.05
C- 0.1
D- 0.2
Answer:
C. 0.1
Explanation:
A carbon ion with 10 electrons and 6 protons would have a charge of ?
Answer:
-4
Explanation:
Electrons are negative while protons are positive.
To find the charge, add the number of protons to the number of electrons.
6+(-10)
6-10
-4 is the charge
Having been kicked, a soccer ball rolls past a kid with a stopwatch. At the moment the ball passes the kid, it has an initial velocity of 4.0 m/s and the watch reads 10.0 s. If the watch reads 23.3 s when the ball stops rolling, what is its average acceleration?
The ball rolls to a rest from 4.0 m/s in a span of 23.3 s - 10.0 s = 13.3 s, so the average acceleration is
(0 - 4.0 m/s) / (13.3 s) ≈ -0.30 m/s²
A horizontal force of 100 N is applied to move a 50-kg cart (initially at rest) across a 10 m level surface. What is the final kinetic energy of the cart?
The net force on the cart is 100 N in the direction of its motion, so by Newton's second law we can find the acceleration a applied to it:
100 N = (50 kg) a
a = (100 N) / (50 kg)
a = 2 m/s²
The cart starts at rest and travels a distance of 10 m, so that its final velocity v satisfies
v ² - 0² = 2 (2 m/s²) (10 m)
v ²= 40 m²/s²
and so the cart ends up with kinetic energy
KE = 1/2 m v ² = 1/2 (50 kg) (40 m²/s²) = 1000 J
A 2,000 kg car travels with a tangential
velocity of 12 m/s around a circular
track with a radius of 30 meters. What
is the car's rate of centripetal
acceleration?
The car's rate of centripetal acceleration in the circular path is 4.8 m/s².
The given parameters;
mass of the car, m = 2,000 kgvelocity of the car, v = 12 m/sradius of the circular path, r = 30 mThe centripetal acceleration of the car is calculated as follows;
[tex]a_c = \frac{v^2}{r}[/tex]
where;
v is the tangential speed of the carr is the radius of the circular pathSubstitute the given parameters and solve for the centripetal acceleration;
[tex]a_c = \frac{12^2}{30} \\\\a_c = 4.8 \ m/s^2[/tex]
Thus, the car's rate of centripetal acceleration is 4.8 m/s².
Learn more here:https://brainly.com/question/11700262
When living things use chemical reactions to break down food, some of the energy is transformed into
OA. sound.
OB. heat.
OC. light
OD.waste
waste.
Answer:
OB. Heat
Explanation:
I hope this helped :)
b. Interpret Data Solution A has a pH of 1.6.
Solution B has a pH of 4. Which solution
has a greater concentration of hydrogen
ions? Explain.
Answer:
Solution A has a pH of 6 and solution B has a pH of 8. Which of the following is true regarding the concentration of hydrogen ions in each solution? A) A has 100 times greater H+ concentration than B. B) B has 100 times greater H+ concentration than A. C) A has 7/9 of the H+ concentration of B. D) A has 9/7 of the H+ concentration of B. E) none of these
Explanation:
Hey im super sorry if i get this wrong :)
An artery with cross sectional area of 1 cm2 branches into 20 smaller arteries each with 0.5 cm2 cross sectional area. If the velocity of blood in the thicker artery is v, what is the velocity of the blood in the thinner arteries
Answer:
The velocity of the blood in the thinner arteries is 0.1 times that of the thicker artery.
Explanation:
To find the velocity of the blood we need to use the continuity equation:
[tex] n_{1}A_{1}v_{1} = n_{2}A_{2}v_{2} [/tex] (1)
Where:
n: is the number of branches
A: is the cross-sectional area
v: is the velocity
For artery 1, we have:
n₁ = 1, A₁ = 1 cm², v₁ = v
For the 20 arteries (2), we have:
n₂ = 20, A₂ = 0.5 cm², v₂ =?
By using equation (1):
[tex] n_{1}A_{1}v_{1} = n_{2}A_{2}v_{2} [/tex]
[tex] 1 cm^{2}*v = 20*0.5 cm^{2}*v_{2} [/tex]
[tex] v_{2} = \frac{1 cm^{2}*v}{20*0.5 cm^{2}} = \frac{v}{10} = 0.1v [/tex]
Therefore, the velocity of the blood in the thinner arteries is 0.1 times that of the thicker artery.
I hope it helps you!
How long would it take a 500. W electric motor to do 15010 J of work?
PLZ HELP help me help help
Answer:
matter
Explanation:
Hope I helped :)
Two hockey players are about to collide on the ice. One player has a mass of
66 kg and is traveling at 1.5 m/s north. The other has a mass of 75 kg and is
traveling at 1.2 m/s south. The system consists of the two tlockey players.
According to the law of conservation of momentum, what is the total
momentum of the system after they collide? Assume the collision is an
elastic collision.
A. 189 kg-m/s south
O B. 9 kg-m/s north
C. 189 kg.m/s north
D. 9 kg m/s south
Answer:
Option B: 9 kg.m/s North
Explanation:
We are told;
One player has a mass of
66 kg and is traveling at 1.5 m/s north.
Thus, velocity is positive since it's acting in the positive direction upwards.
Thus;
m1 = 66 kg
v1 = 1.5 m/s
Also, The other has a mass of 75 kg and is traveling at 1.2 m/s south.
Since it's traveling south, it means that velocity is negative. Thus;
m2 = 75 kg
v2 = -1.2 m/s
From conservation of mass, total momentum is;
m_total = m1•v1 + m2•v2
m_total = (66 × 1.5) + (75 × -1.2)
m_total = 99 - 90
m_total = 9 kg.m/s
This is positive and thus it will be in the direction of the north.
Answer:
9 kg-m/s north
Explanation:
A toaster is rated at 600W, when connected to a120-V source. What current does the toaster carry, and what is its resistance?
Explanation:
Given parameters:
Power of the toaster = 600W
Voltage = 120V
Unknown:
Current = ?
Resistance = ?
Solution:
The power in the circuit is related to resistance and current using the expression below;
P = IV
P = [tex]\frac{V^{2} }{R}[/tex]
P is the power
I is the current
V is the voltage
R is the resistance
To find the current;
I = [tex]\frac{P}{V}[/tex] = [tex]\frac{600}{120}[/tex] = 5A
Now, resistance;
V² = PR
R = [tex]\frac{V^{2} }{P}[/tex] = [tex]\frac{120^{2} }{600}[/tex] = 24ohms
Current, I=5A
Resistance, R=24 ohms
Firstly, let's write the given values:
Power, P=600W
Voltage, V=120V
To find:
Current, I=?
Resistance, R=?
Lets understand ohm's Law:
Ohm's law states that the current through a conductor between two points is directly proportional to the voltage across the two points.
Formula for Ohm's law:
[tex]V=I.R[/tex]
The relation between power, current and resistance can be represented as:[tex]P=I.V[/tex]
Or
[tex]P=\frac{V^2}{R}[/tex]
To find current:
[tex]I=\frac{P}{V}[/tex]
So on substituting given values,
[tex]I=\frac{600}{120} =5A[/tex]
To find resistance:
[tex]R=\frac{V^2}{P}[/tex]
So on substituting given values,
[tex]R=\frac{14400}{600} =24 \text{ohms}[/tex]
Learn more:
brainly.com/question/16014555
When water changes from a gas in the atmosphere to a liquid droplet in a cloud, this is known as
Group of answer choices
transpiration
condensation
evaporation
precipitation
Answer:
Condensation
Explanation:
Answer:When water changes from a gas in the atmosphere to a liquid droplet in a cloud, this is known as
Group of answer choices
transpiration
condensation
evaporation
precipitation,←, that one is right
Explanation: so ur answer is precipitation
Impact extinction 65 million years ago over 50% of all species became extinct, ending the reign of dinosaurs and opening the way for mammals to become the dominant land vertebrates. A theory for this extinction, with considerable supporting evidence, is that a 10-km-wide 1.8×1015kg asteroid traveling at speed 11 km/s crashed into Earth.
A) Determine the change in velocity of Earth due to the impact. Mass of Earth is 5.98×1024kg.
B) Determine the average force that Earth exerted on the asteroid while stopping it. Assume that stopping distance is 0.60 km (depth of the crater created)
C) Determine the internal energy produced by the collision (a bar chart for the process might help). By comparison, the atomic bombs dropped on Japan during World War II were each equivalent to 15,000 tons of TNT (1 ton of TNT releases 4.2×109J of energy).
Answer:
for a)
Explanation:
(1.8 x 10^15)(11 x 10^3 m/s) = (5.98 x 10^24 + 1.8 x 10^15)vf
vf= (1.8 x 10^15)(11 x 10^3 m/s) / (5.98 x 10^24 + 1.8 x 10^15)
= 3.3×10−6 m/s
A projectile rolls off a cliff with a velocity of 40 m/s. The cliff is 60 meters high.
1. Calculate the time the projectile takes to hit the ground
2. Calculate the distance the projectile travelled on the X-axis horizontally before hitting the ground
3. Calculate the impact velocity of the projectile on the Y-axis
4. Calculate the Resultant velocity V r
5. Calculate the angle at which the projectile hits the ground
6. Calculate Sine Θ
7. Calculate Tan Θ
8. A final Resultant Velocity Statement
Answer:
1) t = 3.45 s, 2) x = 138 m, 3) v_{y} = -33.81 m /s, 4) v = 52.37 m / s ,
5) θ = -40.2º
Explanation:
This is a projectile exercise, as they indicate that the projectile rolls down the cliff, it goes with a horizontal speed when leaving the cliff, therefore the speed is v₀ₓ = 40 m / s.
1) Let's calculate the time that Taardaen reaches the bottom, we place the reference system at the bottom of the cliff
y = y₀ + [tex]v_{oy}[/tex] t - ½ g t²
When leaving the cliff the speed is horizontal v_{oy}= 0 and at the bottom of the cliff y = 0
0 = y₀ - ½ g t2
t = √ 2y₀ / g
t = √ (2 60 / 9.8)
t = 3.45 s
2) The horizontal distance traveled
x = v₀ₓ t
x = 40 3.45
x = 138 m
3) The vertical velocity at the point of impact
v_{y} = I go - g t
v_{y} = 0 - 9.8 3.45
v_{y} = -33.81 m /s
the negative sign indicates that the speed is down
4) the resulting velocity at this point
v = √ (vₓ² + v_{y}²)
v = √ (40² + 33.8²)
v = 52.37 m / s
5) angle of impact
tan θ = v_{y} / vx
θ = tan⁻¹ v_{y} / vx
θ = tan⁻¹ (-33.81 / 40)
θ = -40.2º
6) sin (-40.2) = -0.6455
7) tan (-40.2) = -0.845
8) when the projectile falls down the cliff, the horizontal speed remains constant and the vertical speed increases, therefore the resulting speed has a direction given by the angle that is measured clockwise from the x axis
Which change of state is shown in the model?
-condensation
-deposition
-boiling
-freezing
Answer: what’s the model
Explanation:
it's B hope this help's
If a star appears to wobble back back and forth, or its light seems to change in brightness, what might be the cause?
Answer:
The first method, known as the wobble method, looks for changes in a star's relative velocity caused by the gravitational tug of a nearby planet. ... If a planet's orbit crosses between its parent star and Earth, it will block some of the light and cause the star to dim.
Explanation:
We all know that the chains of gravity shackle a planet to its star. That star's enormous gravitational influence keeps its planetary family in orbit. But gravity works both ways: as the planets sweep around in their orbits, they tug on their parent stars to and fro, causing those stars to wobble
Answer:
The way it’s orbiting
Explanation:
True or False. A compound is formed when two or more elements are combined to make a
new substance with its own properties.
Anyone?
Answer:
I believe It's true. Since from memory I KNOW a compound is formed when elements are combined chemically.
Answer: correct
Explanation: a compound is 2 or more elements formed to make a completely new thing. For example, water is a compound. Why? Well, water is h20. What is h20? It’s Hydrogen and Oxygen. Oxygen is also a compound. Another example is CO2 (carbon dioxide) it’s made of carbon and oxygen, so it’s a compound! A element is just a pure substance. It’s not made up of other materials. It’s in its purest form.
After school, a student rides his bike back home. The student lives 750 meters from the school. If it takes the student 3 minutes to get home, what is his average speed?
Answer:
(4,5) and (8,10) what is the slope
Explanation:
After school, a student rides his bike back home. The student lives 750 meters from the school. If it takes the student 3 minutes to get home, what is his average speed?
A hockey puck is sliding on frictionless ice, in an Eastward direction. It collides with a second hockey puck, initially stationary, which then goes off in the Northern direction. What direction is the first hockey puck moving after the collision
Answer:
Southeast
Explanation:
We have to put into cognisance that the first hockey puck is moving in the eastern direction in the first instance, before it hits the other stationary hockey puck. And as such, on hitting the second puck, it's displacement is expected to differ, as a result of the collision. While the stationary puck will the move in the Eastern direction, it changes the direction of the first puck, from eastern to southeastern
A coiled telephone cord forms a spiral with 65.0 turns, a diameter of 1.30 cm, and an unstretched length of 65.5 cm. Determine the inductance of one conductor in the unstretched cord.
Answer:
[tex]L=1.07\ \mu H[/tex]
Explanation:
Given that,
No of turns in a coiled telephone cord is 65
The diameter of the coil, d = 1.3 cm = 0.013 m
Radius, r = 0.0065 m
Unstretched length of the coil, l = 65.5 cm = 0.655 m
We need to find the inductance of one conductor in the unstretched cord. The formula for the inductance is given by :
[tex]L=\dfrac{\mu_oN^2 A}{l}\\\\L=\dfrac{4\pi \times 10^{-7}\times (65)^2\times \pi (0.0065)^2}{0.655 }\\\\L=1.07\times 10^{-6}\ H\\\\L=1.07\ \mu H[/tex]
So, the inductance of one conductor in the unstretched cord is [tex]1.07\ \mu H[/tex].
The picture below shows a science model made with a balloon, cord, and radiosonde.
Image showing a science model made with a balloon; at the bottom of the balloon is a cord with a radiosonde attached to it.
Which of these is most likely the function of the science model?
To change the density of air
To increase the humidity in air
To reduce the atmospheric pressure
To predict extreme weather conditions
Answer:
Since the person above didn't answer correctly I will, the correct option is (D) this is because the picture shown is of a weather balloon and the purpose of this device is to predict weather and its conditions
Hope this helped! (: Have a nice day
Answer: To predict extreme weather conditions
A radiosonde is a small tool that is put under a balloon filled with either hydrogen or helium. As the radiosonde goes up it measures pressure, temperature, and relative humidity.