Answer:
The answer is 2625 NExplanation:
The force acting on an object given it's mass and acceleration can be found by using the formula
force = mass × acceleration
From the question we have
force = 75 × 35
We have the final answer as
2625 NHope this helps you
3N 8N net force???
PLEASE HELP !!!
Answer:
First tell what are the directions and what we've to do?? add subtract or multiply??
Two balls have the same mass. One ball moving along the positive x–axis and the other ball moving along the positive y–axis undergo perfectly inelastic collision. What can you say about the motion of the balls after the collision?
A.
The balls stick and move together.
B.
The balls separate immediately.
C.
The first ball stops while the other ball starts moving.
D.
The two balls travel off in opposite directions, 180° apart.
Answer:
A. The balls stick and move together.
Explanation:
When a bodies undergo perfectly inelastic collision, the two bodies stick together after the collision and begins to move.
In this collision, kinetic energy is not conserved. For perfectly elastic collision, the two bodies conserve kinetic energy and begin to move apart.
Kinetic energy is not conserved because some of the energy gets converted into other forms of energy.
Passengers on a carnival ride move at constant speed in a horizontal circle of radius 5.0 m, making a complete circle in 4.0 s. What is the acceleration?
Answer:
bonita sisisisiisisisisiisissiissiisiiss
4. How many neutrons are there in an atom of protium? Deuterium? Tritium?
P
which is larger 15mm or 0.15cm
Answer:
1 cm = 10mm
Explanation:
hey there both are equal
Rate at which wave travels or propagates
Answer:
v =fλ v = f λ where v
Explanation:
Choose all the answers that apply.
Check all the statements that are correct.
An independent variable is the variable which is changed.
The dependent variable is the variable which is observed as a result of the change.
If data can be repeated, it cannot be trusted.
Experiments are usually published to communicate findings to the scientific community.
Disproving a hypothesis means it cannot be tested again.
Answer: An independent variable is the variable which is changed. Experiments are usually published to communicate findings to the scientific community.
Disproving a hypothesis means it cannot be tested again.
Explanation: i hoped that helped.
Emily rides on a horizontal rotating platform of radius r at an amusement park
and moves at a linear velocity, vt = 1 m/s, one third the way from the center to the
outer edge, and a rotational velocity of 2 RPM. How much would her linear and
rotational velocities be if she moves to the outer edge?
Answer:
Her linear velocity on the outer edge is 3 m/s
Her rotational velocity, is constant at 2 RPM
Explanation:
The given parameters are;
The radius of the rotating platform = r
The linear velocity v(t) = 1 m/s
The position Emily is riding = 1/3 the distance from the center
The rotational velocity = 2 RPM = 2 Revolutions per minute
The formula for angular velocity, ω is given as follows;
ω = θ/t
Where;
θ = The angle rotated
t = The time taken for the rotation
Given that the rotational velocity = 2 RPM
1 revolution = 2·π radians
The angular velocity, ω = 2×π×(2 RPM) = 4·π rad/min = 4·π/60 rad/seconds
ω = 4·π/60 rad/seconds
The linear velocity, v = r₁×θ/t = r₁×ω
Where;
r₁ = 1/3 × r
v = 1 m/s = 1/3 × r × 4·π/60 rad/seconds
∴ r = 1/(1/3 × 4·π/60) = 45/π meters
r = 45/π meters
Therefore her linear velocity, v₂ and her rotational velocity if she moves to the outer edge will be given as follows;
v₂ = r × ω = 45/π × 4·π/60 = 3 m/s
Her linear velocity on the outer edge, v₂ = 3 m/s
Her rotational velocity, remains at 2 RPM.
20. Show that an acceleration of 0.67 m/s/s is the result if a force of 1000N is exerted on a 1500 kg
car.
Explanation:
Given parameters:
Mass of the car = 1500kg
Force applied = 1000N
Acceleration = 0.67m/s²
Unknown:
Proof that the acceleration will result from the applied force on the car
Solution:
According to newton's second law of motion,
Force = mass x acceleration
So;
Acceleration = [tex]\frac{Force }{mass}[/tex]
Now insert the parameters and solve;
Acceleration = [tex]\frac{1000}{1500}[/tex] = 0.67m/s²
We have shown that the acceleration is 0.67m/s²
Dr. Aloysius found four homogeneous mixtures, but he thinks that only three are alloys. He tests each one and determines their elemental compositions. Which of the following is not a possible alloy?
A. carbon and boron
B. iron an nickel
C. aluminum and magnesium
D. iron, carbon, and nickel
Answer:
A. carbon and boron
Explanation:
Carbon and boron is not an alloy.
An allow forms between metals and metals using their huge electron could.
Carbon is a non-metal, boron is a also a non-metal
Two non-metals combining together does not make an alloy.
Iron, nickel, aluminum are all metals.
Answer:
carbon and boron
Explanation:
carbon and boron
A car increases velocity from 30 m/s to 60 m/s in 4 seconds. Calculate the average acceleration of the car over this time.
0.3 m/s2
7.5 m/s2
0.6 m/s2
4.8 m/s2
Answer:
B.7.5m/s2
Explanation:
average acceleration=change invelocity/time taken
a=(60-30)/4
=7.5m/s2
The average acceleration of the car 7.5 m/s²
The parameters given in the question are;
initial velocity= 30 m/s
final velocity= 60 m/s
time= 4 seconds
The formula that can be used to calculate the average acceleration is
= final velocity-initial velocity/time
= 60-30/2
= 30/2
= 7.5
Hence the average acceleration is 7.5 m/s²
Please see the link below for more information
https://brainly.com/question/16569949?referrer=searchResults
Write an equation of the line in slope-intercept form.
A high-speed train in Japan travels a distance of 300. kilometers in 3.60 x 103 seconds. What is the average speed of this train? (Turn the time into hours by using a unit conversion)
Answer:
The average speed is 83.3 m/s
Explanation:
Write one example situation of Newton's Third Law involving mass that are the same.
Answer:
Examples of Newton's third law of motion are ubiquitous in everyday life. For example, when you jump, your legs apply a force to the ground, and the ground applies and equal and opposite reaction force that propels you into the air. Engineers apply Newton's third law when designing rockets and other projectile devices.
the person is not able to see the far lying object clearly. which type of lens will the doctor prescribe him give reason?
Answer:
correction of farsightedness uses a converging lenses that compensates for the under convergence by the eye. the converging lens produces an image farther from the eye than the object so that farsighted can see it clearly.
how is force spread over long and short durations of time?
I think you're having trouble with it only because of how you're trying to look at it.
Don't try to imagine "spreading force" over time. Just think about how long the force lasts !
Like . . .
If you push your doll stroller for 5 seconds, you'll get it up to a certain speed.
Next time, if you push it again with the same force, but you keep pushing for TEN seconds, you'll get it up to a faster speed.
Technically:
(force • time) = impulse.
You gave it more impulse the second time, so it got more momentum from you.
What is a free electron? Can someone help?
A rock falls off a cliff that is 82 m high. How fast is the rock moving when it hits the ground?
Answer:
40.1m/s
Explanation:
This is a kinematics problem
x = 82m
a = -9.8m/s^2
v(initial) = 0
Find: v(final)
Using kinematics equation:
vf^2 = vi^2 + 2a(delta)x
vf^2 = 0 + 2*(-9.8)*(82)
vf = sqrt(1607.2) = 40.09m/s
The is traveling with a velocity of 40.1m/s when it hits the ground.
How much time will it take for a truck to travel 20 meters if it is traveling at 4 m/s?
Answer:
The answer is 5 sExplanation:
The time taken can be found by using the formula
[tex]t = \frac{d}{v} \\ [/tex]
d is the distance
v is the velocity
From the question we have
[tex]t = \frac{20}{4} \\ [/tex]
We have the final answer as
5 sHope this helps you
A gas occupies 500mL at a temperature of 20 degrees Celsius. What is the volume at 150 degrees Celsius?
Answer: 3750 ML
Explanation:
in the movie "gravity" - Why did the escape pod get stuck and pulled back?
Answer:
because nono gravity
Explanation:
no gravity
Two identical cars are driving along the motorway. Car A is travelling at 50 km/h and Car B is travelling at 80km/h. Which car has the most drag acting on it?
Answer:
i think it is car B because the greater the speed, the greater the drag force acting on the vehicle
Explanation:
What is the gravitational acceleration on which a 2-kilogram mass has a weight of 16 Newton's?
Answer:8 m/s ^2
Explanation:
You are taking an image of a patient who is in extreme discomfort while participating in the CT scanning process. Which of the following qualities must you exhibit to obtain a clear and accurate image? O communication skills O interpersonal skills o detail oriented physical endurance
Answer:
Interpersonal skills
Explanation:
Answer:
The right answer is interpersonal skills
Explanation:
give the other person brainliest they deserve it
In lab you submerge 100 g of iron nails at 40 0C in 100 g of water at 20 0 C. Specific heat of iron is 0.12 cal/g∙0C. Equate the heat gained by water to the heat lost by nails and show that the final temperature of water becomes 22.1 0C.
Let T be the final temperature of water and nails (iron).
Given that the initial temperature of 100 g nails, [tex]T_{1F}=40^{\circ}C[/tex].
Specific heat of the iron, [tex]C_F=0.12 cal/g^{\circ}C[/tex].
So, the heat lost by nails [tex]= mC_F(T_{1F}-T}[/tex]
[tex]=100\times 0.12 \times (40-T)\cdots(i)[/tex]
The initial temperature of 100 g water, [tex]T_{1w}=20^{\circ}C.[/tex]
Specific heat of water, [tex]C_w=1 cal/g^{\circ}C[/tex]
So, the heat gained by water [tex]= mC_w(T-T_{1w}}[/tex]
[tex]=100\times 1 \times (T-20)\cdots(ii)[/tex]
As the exergy is conserved, so
the heat lost by the nails = the heat gained by the water
From equation (i) and (ii), we have
[tex]100\times 0.12 \times (40-T)=100(T-20)[/tex]
[tex]\Rightarrow 0.12(40-T)=T-20[/tex]
[tex]\Rightarrow 0.12\times 40 -120T=T-20[/tex]
[tex]\Rightarrow 0.12T+T=4.8+20[/tex]
[tex]\Rightarrow 1.12T=24.8[/tex]
[tex]\Rightarrow T=24.8/1.12= 22.1^{\circ}C[/tex]
Hence, the final temperature of both, iron nails as well as water, become [tex]22.1^{\circ}C[/tex].
What is the average amount of time an American spends consuming media in a week?
A. 10 hours
B. 18 hours
C. 22 hours
D. 28 hours
Please collect the best answer from the choices provided
HURRY!!
Answer: D. 28 hours
Explanation: on edge 2020 :))
The average amount of time an American spends consuming media in a week is 28 hour.
What is Media?Media is the plural form of medium, which (broadly speaking) describes any channel of communication. This can include anything from printed paper to digital data, and encompasses art, news, educational content and numerous other forms of information.
The average amount of time an American spends consuming media in a week is 28 hour.
To learn more about media refer to the link:
brainly.com/question/14047162
#SPJ6
A turtle is moving at a speed of 1.5 m/s for a time of 120 s. What is the distance the turtle travels?
Answer:
The answer is 180 mExplanation:
The distance covered by an object given it's velocity and time taken can be found by using the formula
distance = velocity × time
From the question we have
distance = 1.5 × 120
We have the final answer as
180 mHope this helps you
Answer:
180 meters
Explanation:
1.5 m/s x 120 s
You are twice as likely to become good friends with the person who is in the dorm room next to you than the person two doors down. This is due to:
A. Proximity.
B. Common Interests.
C. Shared Values.
D. Social Background
A net force of 20 N is applied to a 5 kg object. What is the acceleration of the object?
Answer:
[tex]4ms^{-2}[/tex]
Explanation:
F = ma
Rearrange to get acceleration on its own:
a = [tex]\frac{F}{m}[/tex]
Substitute 20 for F and 5 for m:
a = [tex]\frac{20}{5}[/tex] = 4 meters/second/second
Math Practice: Cart A loaded with blocks (600g) moving left at 0.7m/s hits stationary cart B (200g).
After the collision, both carts move left, Cart A at speed 0.27m/s.
What is the velocity of cart B after the collision? Show your work.
Answer:
The velocity of cart B after the collision is 1.29 m/s.
Explanation:
We can find the velocity of cart B by conservation of linear momentum:
[tex] p_{i} = p_{f} [/tex]
[tex] m_{A}v_{A_{i}} + m_{B}v_{B_{i}} = m_{A}v_{A_{f}} + m_{B}v_{B_{f}} [/tex]
Where:
[tex]m_{A}[/tex] is the mass of cart A = 600 g = 0.6 kg
[tex]m_{B}[/tex] is the mass of cart B = 200 g = 0.2 kg
[tex]v_{A_{i}}[/tex] is the inital velocity of cart A = 0.7 m/s
[tex]v_{A_{f}}[/tex] is the final velocity of cart A = 0.27 m/s
[tex]v_{B_{i}}[/tex] is the initial velocity of cart B = 0
[tex]v_{B_{f}}[/tex] is the final velocity of cart B =?
Taking the left direction as the positive horizontal direction:
[tex] 0.6 kg*0.7 m/s + 0 = 0.6 kg*0.27 m/s + 0.2 kg*v_{B_{f}} [/tex]
[tex] v_{B_{f}} = 1.29 m/s [/tex]
Therefore, the velocity of cart B after the collision is 1.29 m/s.
I hope it helps you!