QUESTION 14 During oxygen consumption measurement the participants V2 was t.minand coa was. Umin What was the participants at that point in time ove your answer to decimal places QUESTION 15 The follo

We can conclude that for all integers a and b, if a|b, then a ≤ b.

To prove that for all m and n, if m ≠ n, then m+n ≠ Q, we will use proof by contradiction.

Assume that for some m and n, m ≠ n, and m+n = Q, where Q is a rational number. By the definition of a rational number, Q can be expressed as the ratio of two integers, p and q, where q ≠ 0.

Thus, we have:

m + n = p/q

Multiplying both sides by q, we get:

mq + nq = p

Rearranging, we get:

mq = p - nq

Since p, n, and q are integers, p - nq is also an integer. Therefore, mq is an integer.

But we know that m and n are integers and m ≠ n, which implies that m and n have different prime factorizations. Therefore, mq cannot be an integer, as it would require m and q to have a common factor, which is not possible.

This contradicts our assumption that m+n = Q, and hence, we can conclude that for all m and n, if m ≠ n, then m+n ≠ Q.

To prove that for all integers a and b, if a|b, then a ≤ b, we will use direct proof.

Assume that a and b are integers such that a|b, i.e., there exists an integer k such that b = ak.

To prove that a ≤ b, we need to show that a is less than or equal to k times a, i.e., a ≤ ka.

Dividing both sides of the equation b = ak by a (which is possible as a ≠ 0 since it is a divisor of b), we get:

b/a = k

Since k is an integer, we know that b/a is also an integer. Therefore, a must be less than or equal to b/a.

Multiplying both sides of the inequality a ≤ b/a by a (which is a positive number since a > 0), we get:

[tex]a^2 ≤ ab[/tex]

Since a and b are both positive integers, we know that [tex]a^2 ≤[/tex] ab implies that [tex]a ≤ b[/tex].

Therefore, we can conclude that for all integers a and b, if a|b, then a ≤ b.

To learn more about definition visit:

https://brainly.com/question/13042074

#SPJ11

The area of the circle with a circumference of 6pi m is 9π square meters.

A circle is simply a closed 2-dimensional curved shape with no corners or edges.

The area of a circle is expressed mathematically as;

A = πr²

The circumference of a circle is expressed as:

C = 2πr

Where r is radius and π is constant pi.

We are given that the circumference of the circle is 6π m, so we can set up the equation and solve for the radius.

C = 2πr

6π = 2πr

Simplifying, we get:

r = 6π/2π

r = 3

Now that we know the radius of the circle, we can use the formula for the area of a circle:

A = πr²

Substituting the value of r, we get:

A = π(3)²

Simplifying, we get:

A = 9π

Therefore, the area is 9π m.

Learn more about circles here: https://brainly.com/question/20693416

#SPJ1

The projection of vector u in the direction of vector v is equal to P = - 6.354 i - 5.718 j.

In this problem we need to determine the expression of the projection of vector u in the direction of vector v, whose formula is now introduced:

P = [(u • v) / ||v||²] · v

Where:

If we know that u = - 7 i - 5 j and v = - 10 i - 9 j, then the projection of the vector is:

u • v = 70 + 45

u • v = 115

||v||² = 100 + 81

||v||² = 181

P = (115 / 181) · (- 10 i - 9 j)

P = - (1150 / 181) i - (1035 / 181) j

P = - 6.354 i - 5.718 j

To learn more on projections: https://brainly.com/question/30762916

#SPJ1

The area of the donut ta that is left is 16.485 inches².

We have,

Donuts:

Diameter = 5 inches

Radius = 5/2 inches

The area of the donuts.

= πr²

= 3.14 x 5/2 x 5/2

= 19.625 inches²

Now,

The diameter of the hole in the donut = 2 inches

Radius = 2/2 = 1 inch

Area of the donut hole.

= 3.14 x 1 x 1

= 3.14 inches²

Now,

The area of the donut ta that is left.

= 19.625 - 3.14

= 16.485 inches²

Thus,

The area of the donut ta that is left is 16.485 inches².

Learn more about circle here:

https://brainly.com/question/11833983

#SPJ1

The equation of a line is : y = -5x + 11

The slope of a line is the measure of the tangent of the angle made by the line with the x-axis. The slope is constant throughout a straight line. The slope-intercept form of a straight line can be given by y = mx + b. The slope is represented by the letter m, and is given by, m = tan θ = (y2 - y1)/(x2 - x1)

The slope of line is:

y = 1/5x -2 , m = 1/5

The slope of the line perpendicular to line is m ' = -1/m , -5

The equation of line having slope m and passing through the point (a, b) is given by y − b = m (x − a)

Therefore, the equation of line having slope m ′ = -5and passing through the point (3,-4) is given by:

y - (-4) = -5(x -3)

y + 4 = -5(x -3)

y + 4 = -5x + 15

y = -5x + 15 -4

y = -5x + 11

Learn more about Slope of line at:

https://brainly.com/question/14511992

#SPJ1

The median wait time for the speed slide is 2 times longer than the median wait time for the wave machine.

No, There is a lot of overlap between the two data sets.

We have,

Box plots:

Speed side

Median = 11

First quartile = 6

Third quartile = 12

IQR = 12 - 6 = 6

Wave machine

Median = 9

First quartile = 8

Third quartile = 14

IQR = 14 - 8 = 6

Now,

Difference between the median.

= 11 - 9

= 2

Now,

From the box plots, the wait time for the wave machine is longer than the speed side.

Thus,

The median wait time for the speed slide is 2 times longer than the median wait time for the wave machine.

No, There is a lot of overlap between the two data sets.

Learn more about the median here:

https://brainly.com/question/28060453

#SPJ1

Step-by-step explanation:

See image:

Answer:

(3×2−∣∣∣−5 +12∣∣∣ )+(−3) 2 = -3/1 = -3

Step-by-step explanation:

Multiple: 3 * 2 = 6

Absolute value: abs(the result of step No. 1) = abs(6) = 6

Subtract: the result of step No. 2 - 5 = 6 - 5 = 1

Absolute value: abs(12) = 12

Multiple: the result of step No. 3 * the result of step No. 4 = 1 * 12 = 12

Absolute value: abs(the result of step No. 6) = abs(12) = 12

Exponentiation: (-3) ^ 2 = 9

Add: the result of step No. 8 + the result of step No. 9 = -12 + 9 = -3

Also yeah and just trust ig  Hope it helps if it did tell me cause if it fully did

60 ounces of iodine worth 20 cents per ounce must be mixed with 40 ounces of iodine worth 15 cents per ounce to create a mixture worth 18 cents per ounce.

We have,

Let x be the number of ounces of iodine worth 20 cents per ounce that must be mixed.

The total amount of iodine after mixing is x + 40 ounces, and the total value of the mixture is (20x + 15(40)) cents.

The problem can be expressed as the equation:

(20x + 15(40))/(x + 40) = 18

Multiplying both sides by (x + 40) gives:

20x + 600 = 18(x + 40)

Expanding the right side gives:

20x + 600 = 18x + 720

Subtracting 18x and 600 from both sides gives:

2x = 120

Dividing both sides by 2 gives:

x = 60

Therefore,

60 ounces of iodine worth 20 cents per ounce must be mixed with 40 ounces of iodine worth 15 cents per ounce to create a mixture worth 18 cents per ounce.

Learn more about equations here:

https://brainly.com/question/17194269

#SPJ1

The surface area of the triangular prism is 75 ft squared.

The prism is a triangular base prism. The surface area of the prism can be found as follows:

surface area of the prism = (a + b + c)l + bh

where

Therefore,

a = 2 ft

b = 1.5 ft

c = 2.5 ft

l = 12 ft

Hence,

Surface area of the triangular prism = (2 + 1.5 + 2.5)12 + 2(1.5)

Surface area of the triangular prism = 6(12) + 3

Surface area of the triangular prism = 72 + 3

Surface area of the triangular prism = 75 ft²

learn more on surface area here: https://brainly.com/question/29301011

#SPJ1

The exact area of the figure is 85.54 m².

The coordinates endpoints of the semicircle are (-3,-4) and (6,2).

∴ Length of the diameter of the circle = distance between the end points of diameter = √[6 -(-3))²+(-4-2)²] = 10.81 m

⇒ The radius of the semicircle = 10.81/2 = 5.45 m

∴ The area of the semicircle = πr²/2 = 3.14 × (5.45)² /2= 46.63 m²

Now one side of the rectangle = diameter of the semicircle

                                                   = 10.81 m

The endpoints of another side of the rectangle are (-3,-4) and (-1,-7)

∴  The length of this side = √[-3 -(-1))²+(-4-(-7)²] = 3.6 m.

∴ The area of the rectangle = product of sides = 3.6 × 10.81 = 38.91 m²

The total area of the figure = area of the semicircle + area of the rectangle

                                       = 46.63 + 38.91 =85.54 m²

Hence, the exact area of the figure is 85.54 m².

For more on the area of circles and rectangles,

https://brainly.com/question/30099567

Answer:

13.65

Step-by-step explanation:

25% + 15% = 35%

35% of 21 = 7.35

21 - 7.35 = 13.65

hope this helps :)

200 + 50x = y

this works because you have to add the original cost (200) and then 50 per hour (x) if you do a letter and a number it represents multiplication, then = y  because y is the total cost

The solution of the given inequality is x less than 3/23.

The given inequality is 8>23x+5.

Subtract 5 on both the sides of an inequality, we get

8-5>23x+5-5

3>23x

Divide 23 on both the sides of an inequality, we get

3/23>x

x<3/23

Therefore, the solution of the given inequality is x less than 3/23.

To learn more about the inequalities visit:

https://brainly.com/question/20383699.

#SPJ1

The value of x in the given triangle is 24.

The value of x in the given triangle is calculated as follows;

30 + 4x + 10 + x + 20 = 180 ( sum of angles in a triangle )

Collect similar terms together as shown below;

4x + x = 180 - 30 - 10 - 20

5x = 120

divide both sides of the equation by 5;

5x/5 = 120/5

x = 24

Thus, the value of x is determined from the principle of sum of angles in a triangle.

Learn more about angles in a triangle here: https://brainly.com/question/25215131

#SPJ1

The number of MAD's that represents the difference of the means of each data-set is given as follows:

C. 0.2

The mean of a data-set is given by the sum of all observations in the data-set divided by the number of observations, which is also called the cardinality of the data-set.

Hence, for the first period, the mean is obtained as follows:

Mean = (3 x 0 + 4 x 1 + 5 x 2 + 2 x 3 + 1 x 4)/(3 + 4 + 5 + 2 + 1)

Mean = 1.6.

For the second period, the mean is obtained as follows:

Mean = (4 x 0 + 5 x 1 + 4 x 2 + 0 x 3 + 2 x 4)/(4 + 5 + 4 + 0 + 2)

Mean = 1.4.

The difference is then given as follows:

1.6 - 1.4 = 0.2 -> which is 0.2 MADs, as MAD = 1.

More can be learned about the mean of a data-set at https://brainly.com/question/1136789

#SPJ1

The student who cut his time by the greatest percentage is

Student B.

We have,

Students A's time decreased by 0.125

= 0.125 x 100

= 12.5%

Student B's decreased by 1/6 which in decimal is

= 1/6

= 0.16667

= 16.66667%

and, Students C's time decreased by 15%.

= 15/100

= 0.15

Thus, the student who cut his time by the greatest percentage is

Student B.

Learn more about Percentage here:

https://brainly.com/question/29306119

#SPJ1

The calculated value of the probability P(yellow) is 0.5 i.e. one half

From the question, we have the following parameters that can be used in our computation:

Sections = 2

Color = yellow, and green

Using the above as a guide, we have the following:

Yellow = 1

When the yellow section is selected, we have

P(yellow) = yellow/section

The required probability is

P(yellow) = 1/2

Evaluate

P(yellow) = 0.5

Hence, the value is 0.5

Read more probability at

https://brainly.com/question/24756209

#SPJ1

Therefore, the rate of change of revenue per unit when the cost per unit is changing by $12 and the revenue is $4500 is approximately 12.444 dollars per unit of revenue per dollar increase in cost.

The rate of change of revenue per unit when the cost per unit is changing by $12 and the revenue is $4500, we need to find dR/dC when C changes by 12 and R is 4500.

From the given equation, we know that:

C = [tex]R^2/112,000 + 5807[/tex]

Taking the derivative of both sides with respect to R, we get:

dC/dR = 2R/112,000

Solving for dR/dC, we get:

dR/dC = 1/(dC/dR) = 112,000/(2R)

When the cost per unit changes by $12, the new cost is:

C + dC = [tex]R^2/112,000 + 5807 + 12[/tex]

And when the revenue is $4500, we have:

R = 4500

Values into the expression for dR/dC, we get:

dR/dC = 112,000/(2 * 4500)

= 12.444

Learn more about revenue visit: brainly.com/question/29786149

#SPJ4

The matrix 2x2 of A is:

[20  30]
[ 0 -15]

What is the eigenvector?

The eigenvector is a vector that is associated with a set of linear equations. The eigenvector of a matrix is also known as a latent vector, proper vector, or characteristic vector. These are defined in the reference of a square matrix.

To solve this problem, we need to use the fact that a matrix can be diagonalized only if it has a set of linearly independent eigenvectors.

First, we need to find the eigenvectors and eigenvalues of the matrix. Let A be the matrix we want to find.

We know that [2 3] is an eigenvector of A with eigenvalue 10, so we have:

A[2 3] = 10[2 3]

Multiplying out the matrices, we get:

[2 3] [a b] = [20 30]

where a and b are the unknown entries of A. Solving this system of equations, we get a = 5 and b = 10. Therefore, the matrix A is:

[5 10]
[0 3]

Now, we need to check if [0 3] is also an eigenvector of A with eigenvalue -5:

A[0 3] = -5[0 3]

[5 10] [0 3] = [0 -15]

Multiplying out the matrices, we get:

[0 30] = [0 -15]

This is a contradiction since the two matrices are not equal. Therefore, [0 3] is not an eigenvector of A with eigenvalue -5.

In summary, the matrix A that satisfies the given conditions is:

[5 10]
[0 3]

with eigenvectors [2 3] and [0 1] and eigenvalues 10 and 3, respectively.
To find a 2x2 matrix with eigenvectors [2, 3] and [0, 3] and eigenvalues 10 and -5, respectively, follow these steps:

Step 1: Associate the eigenvectors with their respective eigenvalues:
- Eigenvector [2, 3] has eigenvalue 10.
- Eigenvector [0, 3] has eigenvalue -5.

Step 2: Write the eigenvalue-eigenvector equations:
- 10 * [2, 3] = A * [2, 3]
- (-5) * [0, 3] = A * [0, 3]

Step 3: Expand the equations:
- 10 * [2, 3] = [20, 30]
- (-5) * [0, 3] = [0, -15]

Step 4: Create the matrix A using the expanded equations:
A = [20, 30; 0, -15]

So, the 2x2 matrix A is:
[20  30]
[ 0 -15]

To know more about eigenvalues and eigenvectors visit:

https://brainly.com/question/30968941

#SPJ11

The sample data to estimate the population parameter with a certain degree of confidence.

Hypothesis testing is a statistical inference technique used to determine if a hypothesis about a population parameter is supported by the sample data. The hypothesis testing procedure consists of several steps:

State the null hypothesis and the alternative hypothesis: The null hypothesis (H0) is the hypothesis that there is no significant difference between the sample data and the population parameter. The alternative hypothesis (Ha) is the hypothesis that there is a significant difference between the sample data and the population parameter.

Choose a significance level: The significance level (α) is the probability of rejecting the null hypothesis when it is actually true. A commonly used significance level is 0.05.

Collect the sample data: The sample data should be collected randomly and should be representative of the population.

Calculate the test statistic: The test statistic is a numerical value calculated from the sample data that measures how well the sample data support the null hypothesis.

Determine the p-value: The p-value is the probability of obtaining a test statistic as extreme or more extreme than the one calculated from the sample data, assuming the null hypothesis is true.

Make a decision: If the p-value is less than the significance level, reject the null hypothesis and accept the alternative hypothesis. If the p-value is greater than or equal to the significance level, fail to reject the null hypothesis.

To give an example, let's say we want to determine if the mean weight of apples produced by a particular orchard is different from 150 grams. We collect two random samples of apples, each with a sample size of 50. We set up the hypothesis as follows:

H0: μ = 150

Ha: μ ≠ 150

We choose a significance level of 0.05. We calculate the test statistic as follows:

t = (x - μ) / (s / sqrt(n))

where x is the sample mean, μ is the population mean, s is the sample standard deviation, and n is the sample size.

Let's say we get a t-value of 2.5 and a p-value of 0.015. Since the p-value is less than the significance level, we reject the null hypothesis and conclude that there is sufficient evidence to suggest that the mean weight of apples produced by the orchard is different from 150 grams. We can then use the sample data to estimate the population parameter with a certain degree of confidence.

To learn more about hypothesis visit:

https://brainly.com/question/31319397

#SPJ11

Answer: 39

Step-by-step explanation:

    First, we will list some multiples of 3.

3, 6, 9, 12, 15, 18, 21, 24, 27, 30, 33, 36, [tex]\boxed{39}[/tex], 42, 45, 48, 51, 54, etc.

    Next, we will list some multiples of 13.

13, 26, [tex]\boxed{39}[/tex], 52, 65, 78, 91, 104, 117, 130, 143, 156, 169, 182, 195, etc.

    We see that the least common multiple of 3 and 13 is 39. This is the smallest value that shows up in both lists.

    What is a multiple?

A multiple is a number that can be divided with that number without a reminder.

The critical value is -1.645 and we reject the null hypothesis at the 0.05 level of significance.

a. To find the critical value(s), we need to use a z-table. Since the alternative hypothesis is one-tailed (p<0.57), we will use the one-tailed z-table. At a significance level of 0.05, the critical value is the z-score that corresponds to an area of 0.05 in the tail of the distribution. From the z-table, we find that the critical value is -1.645.

b. To determine whether to reject or fail to reject the null hypothesis (H), we compare the test statistic (z=-2.12) to the critical value (-1.645).

Since the test statistic is smaller (more negative) than the critical value, we reject the null hypothesis at the 0.05 level of significance. This means that we have sufficient evidence to conclude that the true proportion (p) is less than 0.57.

Learn more about critical value,

https://brainly.com/question/30536618

#SPJ11

The value of angle x for the two chords intersecting at the center is 50⁰.

The value of angle x is calculated by applying intersecting chord theorem as shown below;

For a vertex inside angle, the angle formed by the intersection of two chords inside a circle is equal to half of the sum of the two arc angles.

The value of angle x for the two chords intersecting at the center is calculated as;

x = ¹/₂ (arc DC + arc AB )

x = ¹/₂ (56⁰ + 44⁰ )

x = 50⁰

Learn more about chord angles here: brainly.com/question/23732231

#SPJ1

The graph of the given line  2 x + y = 4 is a straight line and the coordinates present above the line will be ( 0, 4) and ( 2, 0) hence option (C) will be correct.

We know, that,

A line section that can connect two places is referred to as a segment.

In other words, a line segment is just part of a big line that is straight and going unlimited in bdirections.

The line is here! It extends endlessly in both directions and has no beginning or conclusion.

A coordinate that is present in the line will always satisfy the equation of the line.

In the given option the coordinate  (0, 4) and (2, 0) is satisfying the given equation by substituting the value  2 x + y = 4 hence option (C) will correct.

For more about line segment

brainly.com/question/25727583

#SPJ1

The function f(x) is [tex]\frac{2}{3}x^3 - 76x^2 + 150x + 2.67[/tex].

To find f(x), we need to integrate the given slope (x-1)(2x-150) with respect to x, because the slope of a tangent line to a function is the derivative of that function. A line's slope is a gauge of its steepness. Between any two points on the line, it is calculated as the ratio of the change in the vertical coordinate (rise) to the change in the horizontal coordinate (run).

So, we have:

f'(x) = (x-1)(2x-150)

Integrating both sides with respect to x:

[tex]f(x) = ∫(x-1)(2x-150) dx[/tex]

[tex]f(x) = \int (2x^2 - 152x + 150) dx[/tex]

[tex]f(x) = \frac{2}{3}x^3 - 76x^2 + 150x + C[/tex]

where C is an arbitrary constant of integration.

To determine the value of C, we can use the given condition f(2) = 2:

[tex]f(2) = \frac{2}{3}(2)^3 - 76(2)^2 + 150(2) + C = 2[/tex]

Simplifying:

C = 2 - (8/3) + 304 - 300 = 2.67

Therefore, the function f(x) is:

f(x) = [tex]\frac{2}{3}x^3 - 76x^2 + 150x + 2.67[/tex].

To learn more about tangent line

https://brainly.com/question/31326507

#SPJ4

To use the unit circle to find the exact value of sin(330°), we can follow these steps:

        330° - 300° = 30°

Since the reference angle is 30°, the corresponding point is located on the terminal side of the angle formed by rotating 30° counterclockwise from the positive x-axis. This point has coordinates of (cos(30°), sin(30°)), which are (√3/2, 1/2).

Use the sign of the trig function in the appropriate quadrant to determine the final value of sin(330°). Since 330° is in the fourth quadrant and the sine function is negative in the fourth quadrant, sin(330°) = -sin(30°) = -1/2.

Therefore, the exact value of sin(330°) is -1/2.

A vector space is a collection of objects, called vectors, that can be added together and multiplied by scalars (usually real numbers or complex numbers) to produce new vectors, while satisfying a set of axioms or rules, such as associativity, commutativity, distributivity, and the existence of a zero vector and additive inverses.

The set of all triples of real numbers with the standard vector addition but with scalar multiplication defined by k(x, y, z) = (k+x, k*y, k*z) is not a vector space. This is because Axiom 8 fails to hold.

Axiom 8 states that 1 * (x, y, z) should equal (x, y, z) for any vector (x, y, z). However, with the given scalar multiplication, 1 * (x, y, z) = (1+x, 1*y, 1*z) = (x+1, y, z), which is not equal to (x, y, z). Therefore, this set does not form a vector space due to the violation of Axiom 8.

To learn more about vector spaces visit : https://brainly.com/question/11383

#SPJ11

The measure of the missing angle in the right triangle rounded to the nearest 10 or the tens Place is 20°.

The figure in the image is a right triangle.

Measure of missing angle = θ

Opposite to angle θ = 8

Adjacent to angle θ  = 20

To solve for the missing angle, we use the trigonometric ratio.

Note that: tangent = opposite / adjacent

Hence:

tangent θ = opposite / adjacent

tan(θ) = 8/20

tan(θ) = 2/5

Take the tan inverse

θ = tan⁻¹( 2/5 )

θ = 21.8014°

Rounding to the nearest 10 or the tens Place.

θ = 20°

Therefore, the missing angle is 20°.

Option C) 20° is the correct answer.

Learn more about trigonometric ratio here: brainly.com/question/28016662

#SPJ1