Ohm's Law relates the following:
A) current, mass, and time
B) volts, amperes and resistance
C) resistivity, area and length
D) resistance, current, and power

A spiral galaxy with a very bright nucleus is commonly referred to as a Seyfert galaxy. Seyfert galaxies are a type of active galaxy that exhibit high luminosity and a bright, compact nucleus.

They are named after the American astronomer Carl Seyfert, who first identified them in the 1940s. The bright nucleus of Seyfert galaxies is believed to be powered by a supermassive black hole at the center of the galaxy. As matter falls into the black hole, it heats up and emits intense radiation, including visible light. This results in a very bright and compact core or nucleus in Seyfert galaxies, which can outshine  spiral galaxy  the surrounding spiral arms. Seyfert galaxies are classified as Type 1 or Type 2, based on the characteristics of their spectra. Type 1 Seyfert galaxies exhibit broad emission lines in their spectra, while Type 2 Seyfert galaxies show only narrow emission lines. Seyfert galaxies are relatively rare, accounting for only a small percentage of all known galaxies, and they are often studied to better understand the properties and behavior of active galaxies and their central black holes.

Learn more about  spiral galaxy    here:

https://brainly.com/question/13074009

#SPJ11

Opposites:

abierto (open)

triste (sad)

desordenado (disorganized)

limpio (clean)

Sentence matching:

"When students have problems, teachers"

A. Les dan soluciones (give them solutions)

B. Escuchan y hablan con ellos (listen and talk to them)

C. Los ignoran (ignore them)

Answer: B. Escuchan y hablan con ellos (listen and talk to them)

To know more about the Opposite adjectives refer here :

https://brainly.com/question/11385993#

#SPJ11

(a) The images will be located at 22.8 cm behind the lens, (b) the third object's image is virtual, (c) the distance of third object is 7.6 cm and (d) the magnification is -3 hence, image is real and enlarged.

The images which have a positive distance will give positive and real images from diverging lenses and the images that have negative distances will give virtual images. The focal length of magnitude  = 15.2 cm

(a) To find the images for each object distance,

1/f = 1/do + 1/di

The first object distance =  30.4 cm

1/15.2 = 1/30.4 + 1/di

di = 22.8 cm

The image is located 22.8 cm away from the lens for an object which has a distance of 30.4 cm. The second object distance = 15.2 cm:

1/15.2 = 1/15.2 + 1/di

di = infinity

The third object distance = 7.6 cm

1/15.2 = 1/7.6 + 1/di

di = -22.8 cm

The image is located 22.8 cm behind the lens.

(b) The first object's distance of 30.4 cm, di = 22.8 cm. It is positive, so the image is real. The second object's distance of 15.2 cm, di = infinity. It is not a finite value, so the image is virtual. The third object's distance of 7.6 cm, di = -22.8 cm. It is negative, so the image is virtual.

(c) For the first object distance = 30.4 cm, The image is inverted. For the second object distance = 15.2 cm, the image is virtual and upright. For the third object distance = 7.6 cm, the image is virtual and upright.

(d) For the first object distance of 30.4 cm:

magnification = -22.8 cm / 30.4 cm = -0.75. The image is smaller than the object and inverted. For the second object distance of 15.2 cm:

m = -infinity / 15.2 cm = 0. The magnification is 0. The image is the same size as the object. For the third object distance of 7.6 cm:

m = -22.8 cm / 7.6 cm = -3

The magnification is -3. The image is larger than the object and inverted.

To learn more about Magnification

brainly.com/question/29356454

#SPJ4

The images formed by a diverging lens are virtual, upright, and located at a distance equal to twice the focal length.

Diverging lenses have a negative focal length, which means they always form virtual images. The magnitude of the focal length represents the distance at which the virtual image is formed. For an object placed at a distance of 30.4 cm from a diverging lens with a focal length of 15.2 cm, the virtual image is formed at a distance of 15.2 cm on the same side as the object. Similarly, for an object placed at a distance of 15.2 cm or 7.6 cm from the lens, the virtual images are formed at distances of 30.4 cm and 45.6 cm, respectively. The virtual images formed by a diverging lens are always upright, indicating that they have the same orientation as the object.

Learn more about Diverging Lens

brainly.com/question/28348284

#SPJ11

By equating the energy of these two objects, we may determine the minimum speed required, which turns out to be 15.24 m/s.

We must determine the least speed needed to carry a 25 kilogramme block up a frictionless plane that forms a 30 degree angle with the horizontal. To resolve this issue, we can apply the idea of energy conservation. The block's initial kinetic energy and the potential energy it gains as it ascends the plane are equal.

Using the block's mass, gravity's acceleration, and the block's vertical distance travelled, we can determine the potential energy obtained by the block. The mass of the block and its velocity can be used to calculate its initial kinetic energy.

we can write the conservation of energy equation as:

mg0.5v² = mg22sin(30) where v is the velocity of the block at the bottom of the plane.

Simplifying this equation, we get:

v = √(449.81sin(30)) = 13.2 m/s

Therefore, the minimum speed required for the block to slide 22 meters up a frictionless plane that makes an angle of 30 degrees with the horizontal is 13.2 m/s.

By equating the energy of these two objects, we may determine the minimum speed required, which turns out to be 15.24 m/s.

Learn more about energy:

brainly.com/question/30672691

#SPJ4

Kepler's second law, also known as the "law of equal areas," states that a line connecting a planet to the sun sweeps out equal areas in equal intervals of time.

This means that when a planet is closer to the sun, it moves faster and covers a greater distance in a shorter amount of time. As it moves farther away from the sun, it slows down and covers less distance in the same amount of time. Despite these variations in speed, the areas swept out by the planet in equal time intervals are always equal. This law implies that the planet travels faster when it is close to the Sun and slower when it is further away. The law of equal areas states that a line connecting a planet to the Sun sweeps out equal areas in equal times, no matter where the planet is in its orbit.

To learn more about Kepler's second law click here https://brainly.com/question/30767101

#SPJ11

The formation of a standing wave requires interference between the incoming and reflected waves of the same frequency. The correct option is C.

A standing wave is a wave pattern that is formed when waves of equal amplitude and frequency travel in opposite directions and interfere with each other in a confined space. This results in a wave pattern that appears to be stationary, with certain points along the wave appearing to be fixed in place.

Option A is not true because a standing wave is formed by waves that are traveling in opposite directions, not the same direction. Two waves traveling over a long distance would have traveled in the same direction and thus would not form a standing wave.

Option B is not true because constructive interference occurs when waves of the same frequency and amplitude are traveling in the same direction and combine to form a wave with a larger amplitude. This does not result in a standing wave.

Option C is the correct answer because a standing wave is formed by the interference between incoming and reflected waves of the same frequency. When a wave is reflected from a fixed end, it undergoes a phase change of 180 degrees. If the reflected wave meets the incoming wave at the correct phase, they interfere constructively and a standing wave is formed.

Therefore, The correct answer is option C.

To learn more about Frequency click:

brainly.com/question/1292129

#SPJ1

In a binary system, two stars orbit around a common center of mass. One of the unique events that can occur in a binary system is a type of stellar explosion known as a supernova.

This occurs when one of the stars in the binary system runs out of fuel and collapses, causing a massive explosion that can outshine an entire galaxy. Another event that can occur in a binary system is a tidal disruption event, where one star is torn apart by the gravitational forces of its companion star. This can also result in a sudden increase in luminosity, although not as bright as a supernova. In addition, binary systems can also exhibit periodic variations in their luminosity due to eclipses, where one star passes in front of the other from our vantage point on Earth. This can be used by astronomers to study the properties of the stars in the binary system, such as their sizes and masses. Overall, while various events can occur in a binary system, supernovae are thought to have about the same luminosity due to the fact that they are caused by the same type of stellar explosion. This allows astronomers to use them as a standard candle for distance measurements in the universe.

Learn more about supernova here

https://brainly.com/question/1276261

#SPJ11

Therefore, the tangential acceleration of the wheel at this time point is [tex]32.0 m/s^2.[/tex]

We can use the formula for tangential acceleration:

[tex]a_t = r * \alpha[/tex]

Here a_t is the tangential acceleration, r is the radius of the wheel, and α is the angular acceleration.

r = 40.0 cm = 0.4 m

α = 80.0 [tex]rad/s^2[/tex]

initial angular velocity, [tex]w_i[/tex]= 10.0 rad/s

We need to find the tangential acceleration, [tex]a_t[/tex].

First, we can find the final angular velocity, [tex]w_f[/tex], using the formula:

[tex]w_f = w_i + \alpha * t[/tex]

Here t is the time for which the wheel accelerates.

To find the time t, we can use the formula for angular displacement:

θ [tex]= w_i * t + 0.5 * \alpha * t^2[/tex]

Since the wheel starts from rest (initial angular velocity is given as 10.0 rad/s) and the angular displacement is not given, we assume that the initial angular displacement is zero, so that

θ = 0.5 * α * [tex]t^2[/tex]

Solving for t, we get:

t = [tex]\sqrt{ ((2 * pi) / 80}[/tex]

θ = 2π radians (one complete revolution)

Now, we can find the final angular velocity,[tex]w_f:[/tex]

[tex]w_f = w_i[/tex] + α * t = 10.0 + 80.0 * 0.2827 = 32.22 rad/s

Finally, we can find the tangential acceleration:

[tex]a_t[/tex] = r * α = 0.4 * 80.0 = 32.0 [tex]m/s^2[/tex]

Learn more about tangential acceleration visit: brainly.com/question/11476496

#SPJ4

The voltage can be obtained by the use of Ohm's law as 20 V.

The Ohm's law states that; the current (I) via a conductor between two places is directly proportional to the voltage (V) between the two sites and inversely proportional to the resistance (R) between them if the temperature and other physical factors remain constant.

By the use of the Ohm's law, we know that;

V = IR

I = 2A

R = 10 ohms

V = 2 * 10

V = 20 V

Thus the voltage that is required by the question is 20 V

Learn more about Ohm's law:https://brainly.com/question/1247379

#SPJ1

To convert 0.010 Volt to millivolts, you need to multiply by 1,000 (since 1 Volt = 1,000 millivolts). 0.010 Volt × 1,000 = 10 millivolts.So, the correct answer is: C) 10 millivolts

The prefix "milli-" means one thousandth, so 1 millivolt (mV) is equal to 0.001 volts. Therefore, to convert from volts to millivolts, we need to multiply by 1000.

0.010 volts x 1000 = 10 millivolts

So, 0.010 volts is equivalent to 10 millivolts.

Alternatively, we can also use the following conversion factor:

1 mV = 0.001 V

To convert from volts to millivolts, we can multiply by 1000:

0.010 V x 1000 = 10 mV

Either way, we get the same answer of 10 millivolts.

Learn more about Volt here:

https://brainly.com/question/28675147

#SPJ11

Answer:

Momentum of ball = mass of ball x velocity of ball

P(ball) = 2 kg x 20 m/s = 40 kg*m/s

Explanation:

According to the law of conservation of momentum, the total momentum of the system (skater and ball) must remain constant before and after the throw.

Let's first calculate the momentum of the ball:

Momentum of ball = mass of ball x velocity of ball

P(ball) = 2 kg x 20 m/s = 40 kg*m/s

Since the skater was at rest before throwing the ball, the initial momentum of the system was 0. Therefore, the final momentum of the system after the throw must also be 40 kg*m/s to conserve momentum.

The momentum of the skater after the throw can be calculated as follows:

P(skater) = P(system) - P(ball)

P(skater) = 40 kgm/s - (2 kg x 20 m/s)

P(skater) = 0 kgm/s

This means that the skater has no momentum after throwing the ball. Since momentum is equal to mass times velocity, the skater's velocity must also be 0. Therefore, the skater remains at rest on the frictionless rink after throwing the ball.

The projectile will be first heard approximately 119 meters beyond the observer.

Projectile speed (Mach) = 3

Observer height = 200 m

Ambient temperature = 300 K

To determine how far beyond the observer the projectile will be first heard, we can use the Mach cone angle formula, which is given by:

θ = asin(1/M)

where θ is the Mach cone angle in radians and M is the Mach number of the projectile.

Using the given Mach number of 3, we can calculate the Mach cone angle as follows:

θ = asin(1/3) ≈ 0.3398 radians

Next, we can use the formula for the distance of the Mach cone from the projectile, which is given by:

d = h * tan(θ)

where d is the distance of the Mach cone, h is the observer height, and θ is the Mach cone angle in radians.

Substituting the given values, we get:

d = 200 * tan(0.3398) ≈ 119 meters

Therefore, the projectile will be first heard approximately 119 meters beyond the observer.

To know more about Mach cone angle formula refer here:

https://brainly.com/question/14726043#

#SPJ11

Answer:

a

Explanation:

Voters who entered the electorate during and just after the Great Depression were more likely to identify as Democrats.

This was largely due to the policies and actions of President Franklin D. Roosevelt and the Democratic Party during the New Deal era, which included programs aimed at providing relief, recovery, and reform to the American people in the aftermath of the Great Depression.

The New Deal programs, such as the Civilian Conservation Corps, the Works Progress Administration, and Social Security, helped to create jobs, improve infrastructure, and provide a social safety net for those in need. These policies resonated with many Americans who had been struggling during the Great Depression and who were looking for a government that would take action to help them.

As a result, the Democratic Party saw a surge in support during this time period, with many voters identifying as Democrats and supporting the party's policies. This trend continued through subsequent generations, with many Americans continuing to identify as Democrats due to their perception of the party as being more aligned with policies aimed at helping the middle and working classes.

Learn more about Democrats at

brainly.com/question/14320124

#SPJ4

The equivalent temperatures on the Celsius and Kelvin scales are (a) the normal human body temperature is 310.15 Kelvin and (b) the air temperature on a cold day is 252.32 Kelvin.

For more such question on temperatures

https://brainly.com/question/27944554

#SPJ11

The temperature for which the minimum escape energy is 12 times the average kinetic energy of an oxygen molecule is 444.44 K (in units of kelvin).

To begin with, let's define the terms escape energy, kinetic energy, and temperature:
Escape energy: The minimum amount of energy required for a particle to escape from the gravitational field of a planet or other celestial body.
Kinetic energy: The energy an object possesses due to its motion.
Temperature: A measure of the average kinetic energy of the particles in a system.
Now, we know that the minimum escape energy (Eesc) is 12 times the average kinetic energy (Ekin) of an oxygen molecule:
Eesc = 12 Ekin
We also know that the average kinetic energy of a molecule is related to its temperature (T) by the equation:
Ekin = (3/2) kT
where k is the Boltzmann constant.
Substituting this equation into the first one, we get:
Eesc = 12 (3/2) kT
Simplifying, we get:
Eesc = 18 kT
Finally, we can solve for the temperature (T):
T = \frac{Eesc }{(18 k)}
Plugging in the values of Eesc and k, we get:
T = \frac{(12 times the average kinetic energy of an oxygen molecule) }{ (18 * 1.38 * 10^{-23} J/K)}
T = 444.44 K
Hence, the temperature for which the minimum escape energy is 12 times the average kinetic energy of an oxygen molecule is 444.44 K (in units of kelvin).

learn more about kinetic energy Refer: https://brainly.com/question/29552176

#SPJ11

The net change in the kinetic energy of the cart from x = 0 m to x = 4 m is +10 N.

The correct option is B.

The net change in the kinetic energy of the body is calculated as follows:

The change in kinetic energy from x between 0 to 2 = Force * distance

The change in kinetic energy from x between 0 to 2 = 10 * 2

The change in kinetic energy from x between 0 to 2 = 20 N

The change in kinetic energy from x between 2 to 4 =  Force * distance

The change in kinetic energy from x between 2 to 4 = - 5 * (4 - 2)

The change in kinetic energy from x between 2 to 4 = -10 N

The net change in the kinetic energy of the body = (20 - 10) N

The net change in the kinetic energy of the body = 10 N

Learn more about kinetic energy at: https://brainly.com/question/8101588

#SPJ1

As expected, we get the same result for the magnitude.

The magnitude and direction of the balloon's velocity relative to the ground, we need to combine the velocity of the balloon relative to the air with the velocity of the air relative to the ground.

Let's start by considering the balloon's velocity relative to the air. We are given that the balloon rises at a constant speed of 13 meters/second relative to the air. Let's call this velocity vector v1.

Next, we need to consider the velocity of the air relative to the ground. We are given that there is a wind blowing eastwards at a speed of 0.7 meters/second relative to the ground. Let's call this velocity vector v2, pointing in the east direction.

The balloon's velocity relative to the ground, we can add the two velocity vectors using vector addition.

Let's start by finding the resulting vector's magnitude:

[tex]|v| = \sqrt{((13 m/s)^2 + (0.7 m/s)^2)\\} = \sqrt{(169.69 + 0.49)} \\= \sqrt{(170.18)}[/tex]

|v| = 13.05 m/s

theta = 86.3 degrees

Therefore, the magnitude of the balloon's velocity relative to the ground is 13.05 m/s, and the direction is 86.3 degrees east of north.

To verify this result using the Pythagorean theorem, we can calculate the horizontal and vertical components of the resulting vector and use them to calculate the magnitude:

vx = 0.7 m/s (eastward component of v2)

vy = 13 m/s (upward component of v1)

[tex]|v| = \sqrt{(vx^2 + vy^2)} \\= \sqrt{((0.7 m/s)^2 + (13 m/s)^2)} \\\= \sqrt{(170.18)}[/tex]

|v| = 13.05 m/s

Learn more about magnitude visit: brainly.com/question/30337362

#SPJ4

The distance traveled by the cylinder on the incline surface is option D-1.6m.

When a cylinder rolls up an inclined plane, its motion can be analyzed using both translational and rotational kinematics.

We can use the conservation of mechanical energy to relate the translational and rotational motion of the cylinder:

1/2 mv² + 1/2 Iω² = mgh

For a solid cylinder rolling without slipping, the moment of inertia is I = 1/2 mr², where r is the radius of the cylinder. Substituting the values and simplifying, we get:

1/2 (2 kg) (4 m/s)² + 1/2 (1/2)(2 kg)(0.5 m)² ω² = (2 kg)(10 m/s²)h

Solving for ω, we get:

ω = 4 m/s / 0.5 m = 8 rad/s

The distance traveled by the cylinder on the incline surface is the length of the incline, which is h/sinθ, where θ is the angle of inclination. Substituting the values, we get:

h = 2/5 sin(30∘) = 1.6 m

To learn more about distance here:

https://brainly.com/question/15172156

#SPJ4

a) The magnitude of the magnetic force exerted by the external field on the wire is given by F = (I * B * R), where I is the current flowing through the wire, B is the magnitude of the magnetic field, and R is the radius of the semicircle wire.

b) The direction of the magnetic force is perpendicular to the direction of the magnetic field and the diameter connecting the ends of the wire.

If the direction of the current and the direction of the magnetic field satisfy the right-hand rule, where you curl the fingers of your right hand along the direction of the current and your outstretched thumb points in the direction of the magnetic field, then the force is directed outward from the wire. If the directions of the current and the magnetic field do not satisfy the right-hand rule, then the force is directed toward the wire.

c) The force is directed from the end of the wire where the current leaves the semicircle to the end of the wire where the current enters the semicircle.

a) The magnitude of the magnetic force on a current-carrying wire in a magnetic field is given by the formula F = (I * B * L), where I is the current, B is the magnetic field, and L is the length of the wire segment in the magnetic field.

In this case, the wire is bent into a semicircle of radius R, so the length of the wire segment in the magnetic field is equal to the circumference of the semicircle, which is 2πR. Therefore, the magnitude of the magnetic force on the wire is F = (I * B * 2πR).

b) The direction of the magnetic force on a current-carrying wire is given by the right-hand rule. If you curl the fingers of your right hand along the direction of the current, your outstretched thumb points in the direction of the magnetic field.

According to the right-hand rule, the magnetic force on the wire is perpendicular to the direction of the magnetic field and the diameter connecting the ends of the wire. If the current and the magnetic field satisfy the right-hand rule, then the force is directed outward from the wire, which is opposite to the direction of the magnetic field.

c) According to the right-hand rule, the force is directed from the end of the wire where the current leaves the semicircle to the end of the wire where the current enters the semicircle. This is because the magnetic force acts perpendicular to the direction of the magnetic field and the diameter connecting the ends of the wire.

The force tends to push the wire away from the magnetic field, causing the current-carrying wire to experience a net force in the direction from where the current leaves the semicircle to where the current enters the semicircle.

To know more about right-hand rule refer here:

https://brainly.com/question/9750730#

#SPJ11

Asteroids in a Hirayama family share similar orbital elements, specifically semi-major axis, eccentricity, and inclination, indicating that they may have originated from the same parent body.

In 1928, Kiyotsugu Hirayama grouped asteroids with similar orbital elements into families. The orbital elements that he used were the semi-major axis, eccentricity, and inclination of the asteroids' orbits. Hirayama noticed that asteroids with similar orbital elements tended to cluster together and speculated that they may have originated from a common parent body that was disrupted by a collision or other mechanism. Today, the Hirayama families are recognized as important groups of asteroids that can provide insight into the formation and evolution of the asteroid belt.

Learn more about Hirayama family here.

https://brainly.com/question/29716154

#SPJ11

Scientists are confident that they have succeeded in making a detection when they have observed a signal that is consistent with the predicted characteristics of the phenomenon they are trying to observe.

When this signal is statistically significant, meaning that it is unlikely to have occurred by chance. For example, in the case of gravitational wave detection, scientists use highly sensitive detectors, such as the Laser Interferometer Gravitational-Wave Observatory (LIGO) to measure minuscule distortions in space-time caused by passing gravitational waves.

When the data from the detectors is analyzed, scientists look for signals that match the predicted waveform of a gravitational wave. They also use statistical methods to determine the probability that the observed signal is not just random noise.

If the observed signal matches the predicted waveform and has a low probability of occurring by chance, scientists can be confident that they have made a detection. However, it is important to note that these detections are often very difficult to make and require a high level of precision and accuracy in both the instruments and the analysis techniques used.

Therefore, scientists also subject their findings to rigorous peer review and validation by independent researchers to confirm the validity of their results.

Learn more about LIGO here:- brainly.com/question/30722973

#SPJ11

Based on the information provided about a double-slit experiment with a slit separation of 1750 nm (nanometers), assuming the slit widths and barrier location remain the same as in part c, and the amplitude is set to the highest setting, the most likely description of how the intensity of light on the screen behaves is:

1. Interference pattern: The intensity of light on the screen would exhibit an interference pattern, characterized by bright fringes (constructive interference) and dark fringes (destructive interference). This is a well-known phenomenon in double-slit experiments, where light waves from the two slits interfere with each other, resulting in a pattern of bright and dark regions on the screen.

The specific pattern of bright and dark fringes would depend on the wavelength of the light used, the slit separation, and the slit widths. In general, the intensity of light on the screen would be highest at the center of the pattern (central maximum) and gradually decrease towards the edges of the pattern (secondary maxima) with alternating bright and dark fringes.

It's worth noting that the exact behavior of the intensity of light on the screen in a double-slit experiment can be more complex and may also depend on other factors such as the distance between the slits and the screen, the size of the slits, and the overall experimental setup.

However, based on the information provided, an interference pattern with bright and dark fringes is the most likely description of how the intensity of light on the screen would behave.

To know more about double-slit experiment  refer here :-

https://brainly.com/question/30727105#

#SPJ11

The force on the bat is also 18,436 newtons. This is because the bat and the ball experience the same force but in opposite directions. When the bat exerts a force on the ball, the ball exerts an equal and opposite force on the bat, according to Newton's third law.

Newton's third law of motion states that for every action, there is an equal and opposite reaction. In other words, when one object exerts a force on another object, the second object exerts an equal and opposite force back on the first object. This law applies to all objects in the universe, from the smallest subatomic particles to the largest celestial bodies.

The forces can be contact forces, such as the force exerted by a person pushing on a wall, or non-contact forces, such as the force of gravity between two objects. For example, when a person jumps, they exert a force on the ground, and the ground exerts an equal and opposite force back on the person, propelling them upwards. Similarly, when a rocket expels gas out of its engines, the gas exerts a force on the rocket, and the rocket exerts an equal and opposite force on the gas, propelling the rocket forward.

To learn more about Newton's third law visit here:

brainly.com/question/29768600

#SPJ4

The angular velocity of the skater during the finale is 2.18 rad/s.

The conservation of angular momentum is a principle in physics that states that the total angular momentum of a system remains constant if no external torques act on the system. Mathematically, this can be expressed as L1 = L2, where L1 is the initial angular momentum of a system, L2 is the final angular momentum of the system, and the total torque acting on the system is zero. This principle is analogous to the conservation of linear momentum, which states that the total linear momentum of a system remains constant if no external forces act on the system. The conservation of angular momentum is an important principle in many areas of physics, including mechanics, electromagnetism, and quantum mechanics.

We can use the conservation of angular momentum to solve this problem. The initial angular momentum of the skater and the hand-arms is given by:

L1 = I1 * w1

where I1 is the moment of inertia of the skater's body, and w1 is the initial angular velocity. Since the hand-arms are extended, their moment of inertia can be neglected.

When the skater pulls their arms inward, the moment of inertia of the system decreases. The final moment of inertia is given by:

I2 = I1 + 2md^2

where m is the mass of each hand-arm, d is the distance of the hand-arm from the axis of rotation, and we multiply by 2 since there are two hand-arms.

The final angular velocity w2 can be found by equating the initial and final angular momentum:

L1 = I1 * w1 = I2 * w2

Substituting the expressions for I1, I2, and simplifying, we get:

w2 = w1 * I1 / (I1 + 2m(d2^2 - d1^2))

where d1 is the initial distance of the hand-arm from the axis of rotation (0.60 m), and d2 is the final distance of the hand-arm from the axis of rotation (0.20 m).

Substituting the given values, we get:

w2 = 0.50 m/s * 1.719 kgm^2 / (1.719 kgm^2 + 2 * 5.0 kg * (0.20 m^2 - 0.60 m^2))

w2 = 2.18 rad/s

Therefore, The skater's angular velocity during the grand finale is 2.18 rad/s.

To learn more about momentum and  impulse equations click:

brainly.com/question/30101966

#SPJ1

The relationship between the angles of incidence and refraction when a light ray passes across the boundary between two media with differing refractive indices is described by Snell-Descartes law.

Snell's law

n₁sinθ₁ = n₂sinθ₂

In the following equation, n1 and n2 stand for the refractive indices of the two media. θ₁ for angle of incidence (the angle between the incident ray and the normal to the boundary), and θ₂ for angle of refraction (the angle between the refracted ray and the normal to the boundary). Sometimes referred to as Snell-Descartes law, in its mathematical form.

Learn more about Snell-Descartes law, here:

https://brainly.com/question/2273464

#SPJ1

The vertical reaction of the space craft on the astronaut is 5mg.

The vertical reaction of the space craft on the astronaut is calculated by applying Newton's second law of motion as shown below.

F = mg

where;

The vertical reaction of the space craft on the astronaut is calculated as;

F = m x 5g

F = 5mg

Thus, the vertical reaction of the space craft on the astronaut is equal to the weight of the astronaut exerted downwards.

Learn more about vertical reaction here: https://brainly.com/question/19260256
#SPJ1

Explorer 35, a recon spacecraft launched from Kennedy Space Center during the late 1960s space race, orbited the moon once, as shown in the plot below with lines indicating lunar radii (1738 km) for scale.

The plot shows the trajectory of Explorer 35, a spacecraft that orbited the moon once. The lines on the plot represent lunar radii, which are used as a scale to understand the position of the spacecraft relative to the moon's surface.

The moon has a diameter of approximately two lunar radii, or 2 * 1738 km = 3476 km. The plot likely shows the position of the spacecraft at 15-minute intervals as it completes its orbit around the moon. This information would be useful for studying the spacecraft's trajectory and position relative to the moon during its mission.

To know more about Kennedy Space Center refer here:

https://brainly.com/question/1124449#

#SPJ11

The amount of torque can be calculated by Force x Moment arm.

It should be noted that to uncover the quantity of torque, you must comprehend both the force applied and the separation from the pivot point (also referred to as the moment arm) at which the force is exerted. The formula for torque can be put forth as:

Torque = Force x Moment arm

The magnitude of force typically is disseminated in Newtons (N) and the length is relayed using meters (m), thus implying that the unit for torque is Newton-meters (Nm).

Learn more about torque on

https://brainly.com/question/20691242

#SPJ1

The longitudinal displacement of a mass element in a medium as a sound wave passes through it is given by s = sm cos (kx - wt).


This formula gives the displacement of a mass element (s) in a medium due to a sound wave, where sm is the amplitude of the wave, k is the wave number, x is the distance along the direction of wave propagation, w is the angular frequency, and t is time.

For the given sound wave with a frequency of 440 Hz and wavelength of 0.75m, we can find the wave number (k) using the relation k = 2π/λ, where λ is the wavelength.

So, k = 2π/0.75 = 8.3776 m^-1.

Now, the formula becomes:

s = 12 cos (8.3776x - wt)

Note that the amplitude of the wave, sm, is given as 12.

We can also find the angular frequency (w) using the relation w = 2πf, where f is the frequency.

So, w = 2π(440) = 2π * 440 rad/s.

Putting all these values in the formula, we get:

s = 12 cos (8.3776x - 2π * 440 t)

This formula gives the longitudinal displacement of a mass element in the medium due to the given sound wave.

learn more about wavelength

https://brainly.com/question/10728818

#SPJ11