Answer: ch2.7 × 10.0m = 2.10 ÷ 1.40 sec
= ch.10.23.
Explanation:
The measured value of gravity 'g' can be found by plugging the given height and time into the formula h = 0.5*g*t^2. Solving for 'g' gives us a measured value of approximately 10.20 m/s^2.
Explanation:You can calculate the measured value of gravity 'g' using the formula for motion under gravity, which is: h = 0.5*g*t^2. Here 'h' stands for height, 'g' for gravitational acceleration and 't' for time.
Given in the problem is h = 10.0 m, t = 1.40 s. Substituting these values in the formula, we get 10.0 = 0.5*g*(1.40)^2.
Solving for 'g', we find g ~ 10.204 m/s^2. Hence your measured value of 'g' is approximately 10.20 m/s^2.
Learn more about Physics of Gravity here:https://brainly.com/question/20324590
#SPJ2
Identify which collisions are elastic (there is more than on choice below.
A car collision where two car stick together.
Ball of sticky tape hitting a billiard ball.
Two bowling balls collide of equal mass.
A steel cube sliding on a friction-less surface collide with another steel cube twice it's size and kinetic energy is not lost.
Answer:
C. bowling balls
D. steel cubes
Explanation:
You want to identify the elastic collisions from the list ...
a car collision where the cars stick togethera ball of sticky tape hitting a billiard ball\two bowling balls of equal masstwo steel cubes on a friction-less surface (no energy loss)Elastic collisionAn elastic collision is one in which there is no loss of kinetic energy. Both kinetic energy and momentum are conserved.
In general, a collision is not elastic if energy is dissipated as sound, light, heat, or deformation of material.
ChoicesOf the offered choices, the first two (car collision, sticky tape collision) will result in deformation of one or more of the colliding objects. That deformation dissipates energy, so the kinetic energy after the collision will be different from before the collision.
The collision of (C) bowling balls, and (D) steel cubes are elastic collisions. Neither results in deformation of the colliding objects.
__
Additional comment
Clearly, any sort of collision can be engineered with enough starting energy to cause the colliding objects to disintegrate. Here, we're primarily concerned with collisions that allow the integrity of the colliding objects to be maintained (except in crashed cars).
The collisions are more or less assumed to be "ideal" in that there is no significant energy loss due to sound or vibration of the objects involved.
two wooden members of uniform rectangular cross section are joined by the simple glued scarf splice shown. knowing that the maximum allowable shearing stress in the glued splice is 620 kpa, determine (a) the largest load p that can be safely applied, (b) the corresponding tensile stress in the splice.
The corresponding tensile stress in the splice is 1240 kPa.
What is tensile stress?Tensile stress is a type of mechanical stress that occurs when an object is pulled or stretched. It is the opposite of compressive stress, which occurs when an object is pushed or compressed.
Given:
Maximum allowable shearing stress in the glued splice, τ_allowable = 620 kPa.
(a) Largest load P that can be safely applied:
The maximum loading capacity of a scarf joint is determined by the allowable shear stress, τ_allowable. The load P is related to the maximum allowable shear stress by the following equation,
P = 2Aτ_allowable
where A is the cross sectional area of either member of the joint.
Therefore, P = 2*A*τ_allowable
= 2*A*620 kPa
= 1240 A (kN)
Hence, the largest load P that can be safely applied is 1240 A (kN).
(b) Corresponding tensile stress in the splice:
The tensile stress in the splice is related to the load P and cross sectional
area A by the following equation, σ = P/A.
Therefore, σ = 1240 A/A = 1240 kPa.
Hence, the corresponding tensile stress in the splice is 1240 kPa.
To learn more about tensile stress
https://brainly.com/question/22093788
#SPJ4
If you know the _______________ of an object, you can determine the _________________ of light that the object emits.
A) mass; peak wavelength
B)temperature; peak wavelength
C)peak wavelength; mass
D)velocity; mass
Answer:
I think a is the correct answer
agriculture 1 of 1 question 2 with 1 blank air 1 of 1 question 3 with 1 blank battery 1 of 1 question 4 with 1 blank climate 1 of 1 question 5 with 1 blank electric energy 1 of 1 question 6 with 1 blank gasoline 1 of 1 question 7 with 1 blank material 1 of 1 question 8 with 1 blank ocean 1 of 1 question 9 with 1 blank option 1 of 1 question 10 with 1 blank planet 1 of 1 question 11 with 1 blank problem 1 of 1 question 12 with 1 blank recycling 1 of 1 question 13 with 1 blank to reduce 1 of 1 question 14 with 1 blank science 1 of 1 question 15 with 1 blank traffic 1 of 1
The frequency and severity of heatwaves, for instance, would increase. According to the U.N. climate science panel, if global warming increases by 1.5°C or more, extreme heat events that occur once every ten years in a climate unaffected by human activity would occur 4.1 times and 5.6 times, respectively (IPCC).
Meaning of a 1.5 degree increase in global warming?A 1.5°C emission route is one that offers a one-in-two to two-in-three likelihood that warming will either stay below 1.5°C or revert to 1.5°C by roughly 2100 after an overshoot, based on the present understanding of the climate response.The frequency and severity of heatwaves, for instance, would increase. According to the U.N. climate science panel, if global warming increases by 1.5°C or more, extreme heat events that occur once every ten years in a climate unaffected by human activity would occur 4.1 times and 5.6 times, respectively (IPCC).To learn more about global warming refer to:
https://brainly.com/question/3553382
#SPJ4
Although nuclear energy is considered a cleaner energy source than fossil fuels, some scientists argue this does not support the claim that nuclear energy is renewable. Which of the following claims best supports the argument that nuclear energy is a nonrenewable energy source?
Nuclear energy is a nonrenewable energy source as it cannot be used as a fuel more than once.
Nuclear energy is a type of energy which releases from the nucleus, the utmost core of atoms. nucleus is made up of protons and neutrons. Nuclear energy can be obtained in two ways: fission: when nuclei of atoms split into many parts & fusion: when nuclei fuse together.
The nuclear energy, which is used to produce electricity around the world today, is through nuclear fission, while technology to generate electricity from fusion is currently in research state. Non-renewable source of energy are those which cannot be used twice or more than once. That's why nuclear energy is considered as the non-renewable force.
To know more about Nuclear energy, here
https://brainly.com/question/2240073
#SPJ4
Consider the scatter plot.
Select an answer from the drop-down menu to correctly complete the statement.
The scatter plot shows a
Choose...
association.
Scatter plot of 10 points. Generally, the points form an upside down U shape.
Linear, exponential, and U-shaped are several ways to characterise the correlation's shape.
What is a scatter plot Mcq?Using a scatterplot, you can see how one variable's scores are compared to another variable's scores. Values that emerge in the data frequently. a bunch of data's mean value.Positive or negative directions can be used to describe the direction of a scatter plot. The direction is positive if the points of the scatterplot move up from left to right or if the explained variable rises as the explanatory variable rises.In scatterplots, we frequently see patterns or connections. When the y variable tends to rise as the x variable rises, we say the variables are positively correlated. A negative correlation between the variables is present when the y variable tends to fall as the x variable rises.To learn more about shape refer to:
https://brainly.com/question/6592115
#SPJ1
which of the following are responsible for the repulsive force between two identically charged atoms?
B: Electrostatic force is responsible for the repulsive force between two atoms charged identically.
The electrostatic force is an attractive force as well as a repulsive force induced by the electric charge particles. The electrostatic force is also called Columb's force. The Columb attraction would be named after Charles-Augustin de Coulomb, a French scientist. One of nature's four basic forces however is electrostatic force.
Between two charges placed at a distance, there exists the electrostatic force. The magnitude of the electrostatic force relies on the magnitude of each charge and the distance between them. When two identically charged objects (both with positive charges or both with two negative charges) are brought together, then the same charges repel each other.
"
Complete question
which of the following are responsible for the repulsive force between two identically charged atoms?
A: force of attraction
B: electrostatic force
"
You can learn more about electrostatic force at
https://brainly.com/question/20797960
#SPJ4
When a metal surface is illuminated with light of wavelength 437 nm, the stopping potential for photoelectrons is 1.67 V. (c = 3.00 × 108 m/s, h = 6.626 × 10-34 J ∙ s, e = -1.60 × 10-19 C, 1 eV = 1.60 × 10-19 J, mel = 9.11 × 10-31 kg)
(a) What is the work function of the metal, in eV?
(b) What is the maximum speed of the ejected electrons?
The work function of the metal is found to be 1.13eV and the speed of the ejected electrons is found to be 7.8 x 10⁵ m/s.
The wavelength of the light used for illumination is 437 nm.
The stopping potential is given to be 1.67V.
The required values are also given,
(a) The work function is found as,
Ve + W = E
E is the energy of the light,
V is the stopping potential,
W is the work function,
Putting values,
1.67eV + W = 1240/437eV
W = (2.8- 1.67)eV
W = 1.13eV.
The work function of the metal is 1.3eV.
(b) The maximum speed of the ejected electrons,
Kinetic energy = stopping potential
1/2mv² = 1.67 eV
v² = 1.67 x 1.67 x 10⁻¹⁹ x 2/9.1 x 10⁻³¹
v₂ = 6.1 x 10¹¹ m/s
v = 7.8 x 10₅ m/s.
So, the speed of the electron is 7.8 x 10⁵ m/s.
To know more about work function, visit,
https://brainly.com/question/19427469
#SPJ4
The momentum of an object is determined to be 7.2 X 10^-3
The equivalent unit of the momentum is 7.2 g m/s.
What is the momentum?We have to note that the momentum of the object is determined as the product of the mass and the velocity of the object. The reason why we say that the momentum is a vector is because it has the direction of the velocity of the object.
We know that the unit of the momentum of the object can be said to be the kilogram meter per second given the dimensions of the momentum. we can be able to obtain an equivalent unit when we convert the given value of 7.2 X 10^-3 Kg m/s.
Learn more about momentum:https://brainly.com/question/24030570
#SPJ1
Missing parts;
The momentum of an object is determined to be 7.2 X 10-3 kg m/s. Express this quantity as provider or use any equivalent unit.
Figure 13-27 gives the gravitational acceleration ag for four planets as a function of the radial distance r from the center of the planet, starting al the surface of the planet (at radius R1,R2,R,or R4). Plots 1 and 2 coincide for r greater than equal to R2; plots3 and 4 coincide for r greater than equal toR4. Rank the four planets according lo(a) mass and (h) mass per unit volume. greatest first.
1 > 2 > 3 > 4 will be the order of the planets As per mass per unit volume and stats are given. As the density of the planet is directly proportional to its mass of the planet.
The force of attraction of two bodies is directly proportional to the products of their masses whereas it is inversely proportional to that of the distance between them here we use the constant Newton's gravitational Universal Constant.
So the more the mass more the attraction and more the distance the less attraction will be or vice-versa.
And shown in the Image attached how density is decreasing from planet 1 to planet 4 so the order of masses will also be the same.
And for bodies that have the same density would be evaluated on the basis of the distance between them.
Learn More about Gravitational Pull: https://brainly.com/question/28854345
#SPJ4
Two balls, of masses m and 2m, travelling in a vacuum with initial velocities 2v and v
respectively, collide with each other head-on, as shown.
Initial,
mass m, velocity 2v to the right
mass 2m, velocity v to the left
After the collision, the ball of mass m rebounds to the left with velocity v.
What is the loss of kinetic energy in the collision?
Answer: 3/2mv^2
After the collision, the ball of mass m rebounds to the left with velocity v.
9/4mv² is the loss of kinetic energy in the collision.
What is collision?
When two bodies such as two pool cues, a golf club and a ball, a hammer and a nail, two railroad cars when connected, or a falling object and a floor abruptly and violently collide, this is referred to as a collision, also known as an impact.
What is kinetic energy?
The energy of motion, or kinetic energy, can be observed in the movement of an item or a subatomic particle. Every moving object and individual particle contains kinetic energy. When something moves, like when a person walks, a baseball flies, a piece of food falls off a table, or a charged particle moves in an electric field, it is exhibiting kinetic energy.
initials : m 1 =m ,m 2=2m,u1=2v,u 2 =−v
after collision: v 1 =−v
using conservation of linear momentum:
m1u1+m2u2=m1v1+m2v2
2mv−2mv=−mv+2mv2
v2 = V/2
Initial kinetic energy=m1 u²₁/2+ m2 u²₂/2= 3mv²
Initial kinetic energy=m1 v²₁/2+m2 v²₂/2 = 3/4 mv²
loss in Kinetic Energy=InitialKE−FinalKE
9/4mv²/2 = 3/2mv²
Therefore, collision, the ball of mass m rebounds to the left with velocity v. 9/4mv² is the loss of kinetic energy in the collision.
Learn more about collision from the given link.
https://brainly.com/question/7221794
#SPJ1
suppose two particles carry a positive charge of 2.80 c for every kilogram of their mass. part a determine the ratio of the gravitational force to the electric force they exert on each other at a given separation.
The ratio of the gravitational force to the electric force between two particles is determined by their respective charges and masses.
What is gravitational force?Gravitational force is a universal force of attraction that acts between all objects that have mass. It is the weakest of the four fundamental forces of nature, however it has the most far-reaching effects, as it is responsible for keeping planets in orbit around stars and for holding galaxies together. Gravitational force arises from an interaction between two bodies due to their masses.
The gravitational force between two particles is proportional to their masses and inversely proportional to the square of the distance that separates them.
To learn more about gravitational force
https://brainly.com/question/27943482
#SPJ4
a closed piston-cylinder device initially contains air at an absolute pressure of 3 bar, temperature of 350 k, and occupies a volume of 0.2 m3 (state 1). heat transfer occurs to the air slowly until the absolute pressure increases to 5 bar and air occupies a volume of 0.6 m3 (state 2). assume that the pressure increases linearly with volume. assume that heat transfer occurs at a boundary temperature of 2000 k. molecular weight of air
According to the problem the molecular weight of air in this process is 0.8316 g.
What is molecular weight?Molecular weight is a measurement used to describe the mass of an individual molecule. It is expressed in daltons (Da) or atomic mass units (amu). It is calculated by adding together all of the atomic masses of the atoms that make up the molecule.
The first law of thermodynamics states that the change in the internal energy of a system is equal to the heat added to the system plus the work done on or by the system.
Since there is no work being done in this process, we can write:
$\Delta U=Q$
We can calculate the change in internal energy using:
$\Delta U=nC_v\Delta T$, where $n$ is the number of moles and $C_v$ is the specific heat capacity at constant volume.
We can calculate $n$ using:
$n=PV/RT$, where $P$ is pressure, $V$ is volume, $R$ is the universal gas constant, and $T$ is temperature.
At state 1, n = (3 bar)(0.2 m3)/[(8.31 J/mol K)(350 K)] = 0.0099 mol
At state 2, n = (5 bar)(0.6 m3)/[(8.31 J/mol K)(350 K)] = 0.0297 mol
The molecular weight of air can be calculated as follows:
Molecular weight of air = 28 g/mol x n (moles) = 28 g/mol x 0.0297 mol = 0.8316 g
Therefore, the molecular weight of air in this process is 0.8316 g.
To learn more about molecular weight
https://brainly.com/question/24478017
#SPJ4
the electric fields (which are vectors) produced by multiple charges add (meaning the vectors add since electric fields are vectors) to produce a total electric field
"The electric fields (which are vectors) produced by multiple charges add (meaning vector addition)."The total electric field is the sum of the two fields if there are two electric fields, one created by a positive charge and the other produced by a negative charge.
This means that if you have two electric fields, one produced by a positive charge and one produced by a negative charge, the total electric field is the sum of the two fields.
The direction of the total field is determined by the direction of the individual electric fields, and the strength of the total field is determined by the magnitude of the individual fields.
To know more about electric fields here
https://brainly.com/question/15800304
#SPJ4
which of the following diagrams best shows the charge distribution prior to a cloud-to-ground lightning strike?
Electrical breakdown between the small positive charge region close to the cloud's base and the negative charge region in the middle of the cloud typically causes a burst of cloud-to-ground lightning.
There are too numerous and unreliable factors that can lead to the production or buildup of charge in the clouds. However, during thunderstorms, strong air currents divide positive and negative charges, resulting in clouds with rain in the lower sections and ice crystals in the upper regions.
There is always a charge imbalance between the atmosphere and the ground during thunderstorms during the wet season, which is partially released through electron movement in the form of "cloud-to-ground" lightning.
To know more about cloud's base
https://brainly.com/question/13019653
#SPJ4
sort these stellar objects by their total power output per unit surface area. not all the objects are on the interactive, so determine the trend first, then sort the objects.
The stellar objects sorted by their total power output per unit surface area,
a brown dwarf with T= 1000 K
a K star with T= 4400 K
the Sun, a G star with T= 5800 K
an F star with T= 7000 K
What is power?Power is defined in physics as the quantity of energy transported or transformed per unit time. The watt is the unit of power in the International System of Units, equivalent to one joule per second. Power is also referred to as activity in ancient writings. A scalar quantity is power. Power may be defined as the pace at which work is completed in a given amount of time. Watt (W) is the SI unit of power, which is joules per second (J/s). Horsepower (hp), which is approximately equivalent to 745.7 watts, is sometimes used to describe the power of motor vehicles and other machinery.
Here,
The star objects are arranged in order of total power output per unit surface area,
a brown dwarf with T= 1000 K
a K star with T= 4400 K
the Sun, a G star with T= 5800 K
an F star with T= 7000 K
To know more about power,
https://brainly.com/question/9605409
#SPJ4
a frictionless pulley has the shape of a uniform solid disk of mass 4.00 kg and radius 17.0 cm . a 2.90 kg stone is attached to a very light wire that is wrapped around the rim of the pulley(figure 1), and the stone is released from rest. as it falls down, the wire unwinds without stretching or slipping, causing the pulley to rotate. how far must the stone fall so that the pulley has 4.30 j of kinetic energy?
Since speed is 0 when at rest. Only while moving does an object have kinetic energy.
Find kinetic energy?The power behind motion is called kinetic energy.
KE = (0.5) m v2 is the equation for kinetic energy.
m denotes the object's mass, and v its speed.
An object at rest has no kinetic energy because it is at rest because its speed is zero, whereas an object moving at some speed and mass will have kinetic energy.
since speed is 0 when at rest. Only while moving does an object have kinetic energy.
An object at rest has no kinetic energy because it is at rest because its speed is zero, whereas an object moving at some speed and mass will have kinetic energy.
Since speed is 0 when at rest. Only while moving does an object have kinetic energy.
To learn more about kinetic energy refer to:
https://brainly.com/question/8101588
#SPJ4
A soft ball pitcher applies 4N of force to a softball for 0.5 seconds. What is the objects momentum
Answer:
The answer is 2 kgm/s.
Explanation:
We see that Impulse = FT = mv but in this case..
we have only a force and time which, of course happens to be the Impulse and NOT the momentum.
I = FT = P
(4)(0.5)
= 2 kgm/s or Ns?
Well the answer in fact is 2 kgm/s.
That is in fact the CORRECT answer not that it can not be identified. It can and is 2 kgm/s since we are talking about Momentum
Describe the current at points X, Y and Z on the circuit.
At point X, the current is the same as the current entering the circuit, which is determined by the voltage of the power source and the resistance of the components in the circuit.
Describe the current at points X, Y and Z on the circuit?At point Y, the current is the same as the current leaving the circuit, which is determined by the voltage of the power source and the resistance of the components in the circuit. At point Z, the current is the sum of the currents at points X and Y, since the current at point Z is the sum of all the currents at the points entering and leaving the circuit.At point X, the current is the current that flows into the circuit at that point. This current will be determined by the total resistance in the circuit. If the total resistance of the circuit is low, then the current at point X will be higher. On the other hand, if the total resistance of the circuit is high, then the current at point X will be lower.At point Y, the current is the current that flows through the circuit between points X and Y. This current will be determined by the resistance of the components between X and Y. If the resistances of the components between X and Y are high, then the current at point Y will be lower. On the other hand, if the resistances of the components between X and Y are low, then the current at point Y will be higher.At point Z, the current is the current that flows out of the circuit at that point. This current will be determined by the total resistance in the circuit. If the total resistance of the circuit is low, then the current at point Z will be lower. On the other hand, if the total resistance of the circuit is high, then the current at point Z will be higher.To learn more about Electric Circuits refer to:
https://brainly.com/question/2969220
#SPJ1
an electron is placed at point a in a uniform electric field of magnitude e directed to the right, as shown above. a short time later, the electron is at point b . which of the following statements describes the relationship between the electric field and the motion of the electron?
The relationship is given as (E) A force not associated with the electric field moves the electron from point A to point B. The electric field does negative work on the electron in the process.
We know that electric field is directed from positive terminal to negative terminal, if the electron truly effected by electric field, it should have moved towards the positive terminal, as electron is negatively charged particle. So a net force not associated with electric field moves the electron from A to B. The proton and electron have equal and opposite charge and force F=qE. So when they are placed in uniform electric field, the magnitude of forces are equal.
Hence option E is correct.
To learn more about electric field check the link below:
https://brainly.com/question/14372859
#SPJ4
Complete question:
An electron is placed at point A in a uniform electric field of magnitude E directed to the right, as shown above. A short time later, the electron is at point B. Which of the following statements describes the relationship between the electric field and the motion of the electron? The electron experiences a force of magnitude F =qE at point A, which accelerates the electron in the direction of the electric field The electric potential energy of the electron-field system at point A is converted into kinetic energy, causing the electron to move along the field lines. The electron moves through the electric field from a higher electric potential at point A to a lower electric potential at point B D) The electron is accelerated by the electric field in a direction perpendicular to the field lines, causing it to move from point A to point B (E) A force not associated with the electric field moves the electron from point A to point B. The electric field does negative work on the electron in the process.
because the conducting shell creates zero field inside itself, it also has no effect on the field inside the sphere. therefore, write an expression for the field in region 1 as that due to the sphere:
The electric field in region 1, due to the sphere, can be expressed as:
[tex]E1 = (1/(4\pi e_0 )) * (Q/r^{2} )[/tex],where Q is the charge of the sphere, r is the distance from the center of the sphere, and ε0 is the permittivity of free space.
An electric field is a force field created by a charged particle that exerts a force on other charged particles in the vicinity. It is measured in units of Volts per meter (V/m). The electric field is a vector quantity, meaning it has both magnitude and direction.
The electric field is defined as the force experienced by a unit charge placed in the field. The magnitude of the electric field is proportional to the charge, and the direction of the field is determined by the direction of the force. Electric fields can exist between two charged objects, or between a charge and the ground. Electric fields can also be generated by electric currents, where they are called magnetic fields.
Learn more about electric field:
https://brainly.com/question/14796569
#SPJ4
What blew up billions of years ago in space
Answer:
i'am a french personn i use a traductor
Explanation:
Des astronomes ont débusqué une explosion cosmique vieille de 10,5 milliards d'années. Une énorme explosion cosmique vieille de 10,5 milliards d'années: des astronomes annoncent mardi avoir découvert la supernova, une étoile en fin de vie, la plus lointaine jamais détectée
Match the following terms and definitions.
1. ratio of densities
2. measure of pull of gravity
3. mass divided by volume
4. Archimedes' Principle
__specific gravity
__weight
__density
__buoyancy
1. ratio of densities-> specific gravity 2. measure of pull of gravity-> weight 3.mass divided by volume-> density 4. Archimedes' Principle-> buoyancy
The ratio of densities is also called as Specific gravity which is used for comparing two different substances of different densities take the example of water and milk both have different densities and that ratio is called specific gravity. And it does not have any SI Unit as it is a simple ratio.
The weight is defined as the pulling of the mass by gravity or the force exerted by a mass on the surface. which has SI Unit as N.
Density is the mass per unit of volume so it makes a simple formula as Mass divided by volume which has si unit as kg/m3.
Buoyancy is also a force a body exerts on the surface of the liquid which is based upon Archimedes' Principle.
Learn More about Density: https://brainly.com/question/6838128
#SPJ4
within a study, the factor that does not change is the: please choose the correct answer from the following choices, and then select the submit answer button.
Within a study, the factor that does not change is the Independent variable. It is the variable that is controlled and changed by the experimenter.
The independent variable is the factor that is manipulated or changed in an experiment to observe the effect on the dependent variable. Examples of independent variables include temperature, amount of light, or amount of water. An independent variable is exactly what it sounds like. It is an independent variable that has no bearing on the other factors you are attempting to evaluate. For example, age may be an independent variable. For example, if you were analyzing how the amount of sunlight affected the development of a certain plant type, the amount of sunlight would be the independent variable. Each plant receives a different amount of light, which may be altered. Growth is the dependent variable. It is a result of the amount of sunlight.
To learn more about sunlight click here https://brainly.com/question/250640
#SPJ4
wooden block floats in water, and a steel object is attached to the bottom of the block by a string as in figure -oq14.3. if the block remains floating, which of the follow-statements are valid? (choose all correct statements.) the buoyant force on the steel object is equal to its *eight. (b) the buoyant force on the block is equal to its weight. (c) the tension in the string is equal to the weight eithe steel object. (d) the tension in the string is less than weight of the steel object. (e) the buoyant force on the ehckis equal to the volume of water it displaces.
The buoyant force on the steel object is equal to its weight. The tension in the string is less than weight of the steel object. The buoyant force on the ehckis equal to the volume of water it displaces.
What is meant by weight?
A force is weight. The Newton is the metric unit of force, and it moves at a speed of 1 metre per second2.The gravitational force that pulls a body toward the earth or another celestial body; it is equal to the mass multiplied by the local gravitational acceleration.Weight is the gravitational force that pulls objects toward the centre of the Earth. The resulting force that pulls a mass toward Earth is known as gravity. In contrast to gravitational force, which occurs between any two masses, this only occurs between Earth and a mass.Weight, which is expressed in newtons, is a unit of measurement for the gravitational force acting on an object.To learn more about weight refer to
https://brainly.com/question/86444
#SPJ4
Find the following for path D in Figure 2.59:
(a) The distance traveled. (b) The magnitude of the displacement from start to finish. (c) The displacement from start to finish.
Answer choise:
A. 8 m
B. 4 m
C. -4 m
(a) A total distance of 8 + 4 = 12 metres. (b) The displacement of C is 8m in magnitude. (c) The displacement is (8m)i from beginning to end.
a) Point The first step of C's journey begins at x=2 and ends at x=10, covering a distance of (10-2) = 8m. In the second step, C travels to x=8 and returns to x=10m. A distance of 2 is equal to 2 * (20-8) = 4 metres.
= 8+4=12 metres is the total distance travelled.
b) The displacement is the distance between two locations in a figure that is the shortest. In the example in the picture, C begins its journey at x=2m and ends at x=10m; the distance between these two points is (10-2) = 8m, therefore the displacement of C is 8m.
C) We now understand that the displacement has a magnitude of 8m and a direction parallel to the positive x-axis.
From beginning to end, there is a (8m)i displacement.
learn more about displacement here:
https://brainly.com/question/11934397
#SPJ4
our solar system group of answer choices is centrally positioned in the milky way galaxy. is held together by the gravitational pulls of jupiter and saturn. currently consists of nine planets. completes one rotation around the center of the milky way every 250 million years.
Our solar system currently consists of nine planets. completes one rotation around the centre of the milky way every 250 million years. The correct option is (C).
Around 4.5 billion years ago, gravity pulled a cloud of gas and dust together, forming our solar system.
The Sun is the parent star of the solar system and by far its most important element. It is categorised as a yellow dwarf with a medium size.
The Sun is the centre of the solar system, which also includes the eight planets, their 162 known moons, the three currently known dwarf planets, each with four known moons, and thousands of other minor bodies. Asteroids, meteoroids, comets, and interplanetary dust fall under this final category.
To know more about solar system:
https://brainly.com/question/14800709
#SPJ4
Object A is released from rest at height h. At the same instant, object B is thrown downward from the same location. Which of the following graphs of speed of v as a function of time t is correct for the two objects?
The graph of speed of v as a function of time t that is correct for the two objects is B. B and A parallel with B on top.
The force of gravity is the force by which a planet or other body draws objects toward its center.
When object A is released from rest at height h and at the same instant, object B is thrown downward from the same location, the graph of speed of v as a function of time t is B and A parallel with B on top.
This is because object A is being acted upon by the force of gravity only and is therefore in free fall, while object B is being thrown downward with an initial velocity and also experiences the force of gravity. Both objects will accelerate at the same rate due to gravity, but object B will have an additional initial velocity, so its speed will be greater than object A's at all times.
The problem seems incomplete, it must have been...
"Object A is released from rest at height h. At the same instant, object B is thrown downward from the same location. Which of the following graphs of speed v as a function of time t is correct for the two objects?
A. B and A in a v shape with B on top
B. B and A parallel with B on top
C. B and A with lots of space between them
D. B and A with little space between them
E. B and A close together with A on top"
Learn more about force of gravity here: https://brainly.com/question/862529
#SPJ4
Below are several statements. Each statement can best be classified as either a law or a theory, Please select each statement that is best classified as a law. a. When a gas rises in temperature, we believe that it is due to increased motion of the molecules. b. Gravity explains why planets remain in their orbits.
c. There is strong evidence to suggest that earthquakes are due to moving parts of the earth's crust that we call plates d. Force equals mass times acceleration e. When we see several layers of rock, the lower layers are older. f. With all other conditions remaining stable, we observe that as the pressure of a gas increases, the temperature also rises. g. Likewise, when the temperature rises, the pressure rises. h. Kepler developed a set of rules to describe the motion of the planets. i. Based on the available data and our current understanding, it seems that the Universe began with a sudden expansion of space
Below are several statements. Since scientific law is a statement of the results of the relationship between facts and usually uses a formula or mathematical equation, the statement that is best classified as the law is
a. When a gas rises in temperature, we believe that it is due to the increased motion of the molecules.
d. Force equals mass times acceleration.
f. With all other conditions remaining stable, we observe that as the pressure of a gas increases, the temperature also rises.
g. Likewise, when the temperature rises, the pressure rises.
A scientific law is a statement in the world of science that starts from a hypothesis and is proven by experiments involving theoretical hypotheses. Experimental results can support the hypothesis theory and can prove its truth. Usually, this is reinforced by mathematic formulas. Historically, the laws of science have been inspired by scientific experiments and created on the basis of critical thinking or by some chance circumstances.
While a scientific theory is a concept or construction that is related to one another, with an emphasis on boundaries, and systematic prepositions, and carried out based on the presence of symptoms. Because the existing symptoms can be used to determine the relationship between one variable and another, according to the expected goals.
More about Scientific Law and Theory on:
https://brainly.com/question/17152046
#SPJ4
____ is to genetic influences as ___ is to environmental influences
"Nature" is to genetic influences as "Nurture" is to environmental influences.
Explain the difference of Nature and Nurture?The phrase "nature vs. nurture" refers to the debate over how much "nature" or "nurture" contributes to an individual's traits.
While "nurture" can relate to upbringing as well as life experience more broadly, "nature" refers to innate biological characteristics (specifically genetics).
The way the phrase "nature vs. nurture" is written gives the impression that either a person's genes or their upbringing determine their personality traits, IQ, preferences, and other qualities. Scientists have demonstrated that reality is more complex and that these as well as other elements can contribute to the explanation of the wide range of individual differences.Thus, theories emphasizing the importance of either education and experience but rather biological nature had also risen and fallen in popularity throughout the modern era, with genetics increasingly recognized as a key factor in determining uniqueness in the latter 20th century and even beyond.
To know more about the genetic influences, here
https://brainly.com/question/28218372
#SPJ1