Answer:
h2
Explanation:
15. Objects can have kinetic energy, potential energy, or both. Energy can be in the form of motion. Energy can
also be stored by objects in various ways, including position, chemical bonds, or physical state.
Which statement is true? And why?
a. An object’s mass has no effect on its potential energy.
b. Potential energy is converted to kinetic energy as a stationary object begins to move.
c. Kinetic energy is converted to potential energy as a stationary object begins to move.
d. A stretched rubber band stores no energy.
Answer: b because Potential energy is converted to kinetic energy as a stationary object begins to move.
Explanation:
A student determines that the theoretical yield of CaCO3, from a precipitation reaction is 21.5 grams
However, this student only recovers 19.9 grams of precipitate through filtration of the solution.
What would be this student's percent yield?
A. 92.6%
B. 0.93%
C. 108%
D. 85.6%
Answer:
92.6
Explanation:
The cation that has the same number of electrons (isoelectronic) as Ne is
None of the listed options
O Na
Mg 2-
All of the listed options
O AI 3-
Which of the following substances can be dissolved in pure water to give a basic solution?
Hydrogen chloride
Sodium bromide
Sodium hydroxide
Sodium chloride
I think it's sodium hydroxide
Explanation:
sodium hydroxide is a base
Give the ratio that balances out the following equation: ___Cr + ___Pb(NO3)4 ---> ___ Cr(NO3)3 + ____ Pb
Answer: Ratio : 4, 3, 4, 3 are the answers.
Explanation:
Determine the hydroxide ion concentration in
a solution that is 0.00034 M Ca(OH)2.
Answer in units of M.
Answer:
[tex]0.00068M[/tex]
Explanation:
Hello there!
In this case, according to the ionization of calcium hydroxide, a strong base:
[tex]Ca(OH)_2\rightarrow Ca^{2+}+2OH^-[/tex]
Thus, since there is a 1:2 mole ratio of calcium hydroxide to hydroxide ions, we apply the following proportional factor to obtain:
[tex]0.00034\frac{molCa(OH)_2}{L}*\frac{2molOH^-}{1molCa(OH)_2} \\\\=0.00068\frac{OH^-}{L}\\\\=0.00068M[/tex]
Regards!
Food Science is the study of the physical, biological, and chemical makeup of food; the
causes of food deterioration; and the concepts ulderlying food processing.
True
False
[H+] [OH-] =
NEED HELP ASAP!!!
Suppose the available nutrients in the soil of an ecosystem decrease. Over time, which adaptation is MOST LIKELY to evolve among the plants that survive there?
Answer:
Root system will become larger or extend farther
Explanation:
If nutrient in soil decrease, the plant's roots system will likely become larger and extend out deeper and farther to get all the nutrients it possibly can
Calculate the molarity of the two solutions.
The first solution contains 0.200 mol of NaOH in 2.00 L of solution.
The second is 15.5G of NaCl in 671mL of solution
Answer:
a) 0.100 M
b) 0.395 M
Explanation:
a) Calculate the molarity of a solution that contains 0.200 moles of NaOH (solute) in 2.00 L of solution
We will use the following expression for molarity.
[NaOH] = moles of solute / liters of solution
[NaOH] = 0.200 mol/2.00 L = 0.100 M
b) Calculate the molarity for a solution that contains 15.5 g of NaCl (solute, 58.44 g/mol) in 671 mL of solution
We will use the following expression for molarity.
[NaCl] = mass of solute / molar mass of solute × liters of solution
[NaCl] = 15.5 g / 58.44 g/mol × 0.671 L = 0.395 M
What is the total number of moles of O2(g) that must react completely with 5.00 moles of C4H10(g)?
Answer:
32.5 moles of O2(g) are necessaries for a complete reaction
Explanation:
Based on the reaction of combustion of C4H10(g):
C4H10(g) + 13/2 O2(g) → 4CO2(g) + 5H2O(g)
1 mole of C4H10 needs 13/2 moles O2 for a complete reaction.
That means, the moles of O2 required for a reaction of 5.00 moles of C4H10 are:
5.00 moles C4H10 * (13/2mol O2 / 1mol C4H10) =
32.5 moles of O2(g) are necessaries for a complete reaction
How many electrons are in the highest occupied energy level of a neutral chlorine atom?
A community located downwind from a coal-fired power plant has seen a recent increase in the number of dead and dying trees. A so scientist measured values for the following parameters before and after the trees died off. Which of the following oil data should be used to determine if the coalfired power plant emiations were the cause of the damage to the trees
a. Moisture content and water retention
b. Parent material composition
c. Pesticide and herbicide residue levels
d. Calcium and aluminum levels
Answer:
Option D, Calcium and Aluminum levels
Explanation:
The coal fired power plant releases huge amount of particulate and gaseous emissions such as mercury, sulphur dioxide, nitrogen oxide etc. When there is rain, these gaseous and particulate matter comes to the ground along with rain water and pollute the soil. There are also chances of acid rain due to the presence of sulphur dioxide. Polluted soil and acid rain negatively impact the growth of the plants and causes leaching of Aluminium thereby decreasing the availability of calcium for the plants. Thus, the trees die. Hence, if the amount of Aluminium and Calcium in soil is determined, one can easily deduce the cause of death of trees.
Hence, option D is correct
What is the limiting reactant in the following equation? How much Fe2O3 will be produced if 2.1 g of Fe reacts with 2.1 g of O2?
4 Fe + 3O2 —> 2Fe2O3
Answer:
Fe is limiting reactant and 3.00g of Fe2O3 will be produced
Explanation:
To solve this question we must convert the mass of each reactant to moles and, using the reaction we can find limiting reactant. With moles of limiting reactant we can find moles of Fe2O3 and its mass as follows:
Moles Fe -Molar mass: 55.845g/mol-
2.1g * (1mol / 55.845g) = 0.0376 moles
Moles O2 -Molar mass: 32g/mol-
2.1g * (1mol / 32g) = 0.0656 moles
For a complete reaction of 0.0656 moles of O2 are needed:
0.0656moles O2 * (4mol Fe / 3 mol O2) = 0.0875 moles Fe
As there are just 0.0376 moles,
Fe is limiting reactant
The mass of Fe2O3 is:
Moles:
0.0376 moles Fe* (2mol Fe2O3 / 4mol Fe) = 0.0188 moles Fe2O3
Mass:
0.0188 moles Fe2O3 * (159.69g / mol) =
3.00g of Fe2O3 will be produced
Mercury: Mineral or Not Mineral? Mineral Not Mineral
Answer:
not a mineral but is a “mineraloid
Explanation:
not mineral
Explanation: its an element but it is not a mineral
Which of the following is true for a gas under conditions of very high pressure? (5
points)
1) PV > nRT, because the real volume of the gas would be more than the ideal
volume.
2) PV = nRT, because intermolecular forces are considerable at very high
pressures.
3) PV = nRT, because all gases behave as ideal gases at very high pressures.
04) PV = nRT, because the volume of the gas would become negligible.
Answer:
1) PV > nRT, because the real volume of the gas would be more than the ideal
volume.
Explanation:
According to the ideal gas equation; PV = nRT. Let us recall that this equation only holds under ideal conditions.
Gases exhibit ideal behavior under high temperature and low pressure. At higher pressure, the real volume of the gas is larger than the ideal volume of the gas.
Thus, at high pressure, PV > nRT, because the real volume of the gas would be more than the ideal volume.
Answer:
1) PV > nRT, because the real volume of the gas would be more than the ideal volume.
Explanation:
just took the test :)
8
What happens to solid waste in the circulatory system?
A it's expelled through the lungs
B
It pumps into the coronary circulation
C
It's dropped off in the kidneys
D
It's deposited in the aorta
Answer:c it’s dropped off in the kidneys
Explanation:
I took the quiz
The solid wastes are from the circulatory system is expelled to the kidney where, the nitrogenous wastes like urea and uric acid is excreted as urine from the body.
What is circulatory system ?A circulatory system is an organ system, where the blood is purified and oxygenation of blood takes place. Through circulatory system, the blood reaches throughout the body pumped from the heart through veins.
The organs included in circulatory system are lungs, heart, aorta, veins, blood vessels etc. There are various kinds of blood vessels each having specific functions.
There is a network of blood vessels including arteries and large veins, capillaries that join the venules and other veins. All the nutrients and ions are circulated throughout the body through blood and solid wastes are then expelled to kidney.
Kidney function as a sieve to clean the good fluid from waste products. Uric acid and urea along with water excreated as urine then. Thus, option C is correct.
To find more about circulatory system, refer the link below:
https://brainly.com/question/10103458
#SPJ6
If 3.13 mol of an ideal gas has a pressure of 2.33 atm and a volume of 72.31 L, what is the temperature of the sample in degrees Celsius?
Answer:
382.49 C degree Celsius
Explanation:
Hello,
This problem deals with understanding the ideal gas law which hopes to predict how ideal gases might behave in any given condition. I listed the formula below and we are basically just going to solve for temperature by rearranging the equation as seen on the picture (there's also other rearranged ones in case you need to solve for those).
Universal gas constant R has a value of 0.0821 L * atm/(mole * K) when working with these given units so it will be part of this equation. R value changes based on what units you have.
T = PV/nR
= (2.33) (72.31) / (3.13)(0.0821)
= 655.64 K
Question is asking temperature in celsius so we employ the formula attached below:
C = K - 273.15
= 655.64-273.15
= 382.49 degree Celsius
382.49 degree Celsius is the answer!
What compound(s) does pure water contain?
At 27.0°C, the volume of a gas is 630 L. At the same pressure, its volume is 92,0 mL at a temperature of
Answer:
–272.96 °C
Explanation:
From the question given above, the following data were obtained:
Initial temperature (T₁) = 27.0 °C
Initial volume (V₁) = 630 L.
Final volume (V₂) = 92.0 mL
Final temperature (T₂) =?
Next, we shall convert 27.0 °C to Kelvin temperature. This can be obtained as follow:
T(K) = T(°C) + 273
Initial temperature (T₁) = 27.0 °C
Initial temperature (T₁) = 27.0 °C + 273
Initial temperature (T₁) = 300 K
Next, we shall convert 92.0 mL to L. This can be obtained as follow:
1000 mL = 1 L
Therefore,
92 mL = 92 mL × 1 L / 1000 mL
92 mL = 0.092 L
Next, we shall determine the final temperature.
Initial temperature (T₁) = 300 K
Initial volume (V₁) = 630 L.
Final volume (V₂) = 0.092 L
Final temperature (T₂) =?
V₁ / T₁ = V₂ / T₂
630 / 300 = 0.092 / T₂
2.1 = 0.092 / T₂
Cross multiply
2.1 × T₂ = 0.092
Divide both side by 2.1
T₂ = 0.092 / 2.1
T₂ = 0.04 K
Finally, we shall convert 0.04 K to celsius temperature. This can be obtained as follow:
T(°C) = T(K) – 273
Final temperature (T₂) = 0.04 K
Final temperature (T₂) = 0.04 – 273
Final temperature (T₂) = –272.96 °C
1. How many grams of water are in a cup containing
0.1 moles of H2O?
Answer:
Explanation:
fdcdf
what do adamantium,vibranium and unobtainum have in common
Answer:
they're all fake
Explanation:
Do u believe that you are beautiful/handsome?
Yes or No?
HCN
H:C:N:
3.
Is this Lewis Structure correct?
Answer:
No, your missing some bonds
If the pH of a solution is 6.96, then the solution is a
Answer:
acid
Explanation:
solution with pH less than 7 is acid
those with more that 7 is base
those equal to 7 is neutral
Study the reaction.
CH4 + 2O2 → CO2 + 2H2O
If 7.4 moles of carbon dioxide (CO2) form at the end of the reaction, how many moles of methane (CH4) and oxygen gas (O2) entered the reaction?
? moles of methane and
? moles of oxygen gas
7.4 moles of methane (CH₄)
14.8 moles of oxygen gas (O₂)
PLEASE HELP!! ORGANIC CHEMISTRY
A sample of a diatonic gas is loaded into an evacuated bottle at STP. The 0.25 L bottle contains 1.76 grams of the unidentified gas. Calculate the molar mass of the gas. What is the identity of the diatomic gas?
Answer:
(a) 157.7 g
(b) 7.04 g/dm³
Explanation:
(a) From the question,
According to Avogadro's Law,
1 mole of every gas at STP occupies a volume of 22.4 dm³
But mass of 1 mole of the diatomic gas = molar mass of the gas.
This Implies that,
The molar mass of the gas at STP occupies a volume of 22.4 dm³
From the question,
If,
0.25 L bottle contain 1.76 g of the gas,
Therefore,
Molar mass of the gas = (1.76×22.4)/0.25
Molar mass of the gas = 157.7 g.
(b) Density of the gas = mass/volume
D = m/v
Given: m = 1.76 g, v = 0.25 L = 0.25 dm³
Therefore,
D = 1.76/0,25
D = 7.04 g/dm³
Why do we need cells to divide? Give two examples.
Answer:
Cells need to divide to reproduce.
Explanation:
They go through numerous stages, such as mitosis to further replicate themselves. They can't get things done alone, so they have to work in numbers.
4. The device shown is a
that's used to measure the heat transferred by a reaction under constant volume.
A. bomb calorimeter
B. reaction vessel
C. thermometer
D. coffee-cup calorimeter
Answer:
The device shown is a calorimeter that used to measure the heat transfer by a reaction under constant volume.
Explanation:
A bottle labeled 0.01 M HCl is found in the laboratory. Assuming that the HCl is completely ionized calculate the [H+], [OH-] and the pH of the solution.
Answer:
[H⁺] = 0.01 M[OH⁻] = 1x10⁻¹² MpH = 2Explanation:
The assumption that the HCl is completely ionized means that the original concentration of the acid is equal to [H⁺].
[H⁺] = 0.01 MWith [H⁺], we can calculate [OH⁻], by using the following formula:
[H⁺] * [OH⁻] = 10⁻¹⁴0.01 M * [OH⁻] = 10⁻¹⁴[OH⁻] = 1x10⁻¹² MFinally we calculate the pH of the solution:
pH = -log[H⁺]pH = 2