Explanation:
Fusion processes require fuel and a confined environment with sufficient temperature, pressure, and confinement time to create a plasma in which fusion can occur. The combination of these figures that results in a power-producing system is known as the Lawson criterion. In stars, the most common fuel is hydrogen, and gravity provides extremely long confinement times that reach the conditions needed for fusion energy production. Proposed fusion reactors generally use hydrogen isotopes such as deuterium and tritium (and especially a mixture of the two), which react more easily than hydrogen to allow them to reach the Lawson criterion requirements with less extreme conditions. Most designs aim to heat their fuel to around 100 million degrees, which presents a major challenge in producing a successful design.
As a source of power, nuclear fusion is expected to have many advantages over fission. These include reduced radioactivity in operation and little high-level nuclear waste, ample fuel supplies, and increased safety. However, the necessary combination of temperature, pressure, and duration has proven to be difficult to produce in a practical and economical manner. Research into fusion reactors began in the 1940s, but to date, no design has produced more fusion power output than the electrical power input.[1] A second issue that affects common reactions is managing neutrons that are released during the reaction, which over time degrade many common materials used within the reaction chamber.
Fusion researchers have investigated various confinement concepts. The early emphasis was on three main systems: z-pinch, stellarator, and magnetic mirror. The current leading designs are the tokamak and inertial confinement (ICF) by laser. Both designs are under research at very large scales, most notably the ITER tokamak in
which phase has the highest entropy?
a. gas
b. liquid
c. solid
d. aqueous
Answer:
Gas>Liquid>Solid
Explanation:
Entropy by definition is the degree of randomness in a system. If we look at the three states of matter: Solid, Liquid and Gas, we can see that the gas particles move freely and therefore, the degree of randomness is the highest.
As the reaction goes through phases, the phase that has the highest entropy is the gas state. This is further explained below. Option A is correct.
What is entropy?A thermodynamic number that represents the inability of a system's thermal energy to be converted into mechanical work, and is commonly understood as the system's degree of disorder.
In conclusion, we have that as the reaction goes through phases, the gaseous state has the highest entropy.
Read more about Chemical reaction
https://brainly.com/question/16416932
what are massless particles
Answer:
particals that have no mass
Explanation:
key word maseless
please help me! giving brainliest!!
Answer:
It is a covalent bond because both carbon and oxygen are nonmetals. The formula will be CO² because the electrons between the atoms are being shared equally.
Answer:
Option C
Explanation:
CO₂ is a covalent bond because we know that both elements are nonmetals. The carbon atoms shares 2 electrons with each oxygen atom and each oxygen atom shares two electrons with the carbon atom. CO₂ forms a nonpolar covalent bond, meaning that the electrons are shared equally.
10. Based on their valence electrons, how many
atoms of chlorine are expected to bond
with each of the following elements?
a. carbon
b. nitrogen
c. aluminum
d. sulfur
will share 2 elctrons with 2 Cl to form
S in column 16 WILL SHARE 2 ELECTRONS WITH 2 /Cl to form
SCl2
,
Answer:
a. carbon CCl4
b. nitrogen NCl3
c. aluminum AlCl3
d. sulfur SCl2
Explanation:
10. Based on their valence electrons, how many
atoms of chlorine are expected to bond
with each of the following elements?
a. carbon CCl4
b. nitrogen NCl3
c. aluminum AlCl3
d. sulfur SCl2
Cl is in Periodic Table column 17, so it has 7 valence and needs 1 more to have an electronic structure like its nearest noble gas, Ar.
It then has an oxidation state 0f -1.
Carbon in column has +/-4 charge, so 4 Cl will bond with 1 C to make
covalent CCl4
Nitrogen in column 15 is -3. It will share 3 electrons with 3 Cl to form
covalent NCl3
Al in column 13 give away 3 electrons to 3 Cl to form
ionic AlCl3
S in column 16 will share 2 electrons with 2 Cl and frorm
SCl2
Which unit is 10,000 times LARGER than the MICRO unit?
Answer:
Micro means 0.000001. So 10,000 times larger than that is the Centi unit, which is 0.01
Help pls it’s so hard
Answer:
skip and read this story then complete the problem
Al^+3
protons =
electrons =
neutrons =
N^-3
protons =
electrons =
neutrons =
Explanation:
aluminium
proton= 13
electron=13
neutron=27
nitrogen
proton= 7
electron=7
neutron= 14
The partial pressure of CO2 gas in a bottle of carbonated water is 4.60 atm at 25 ºC. How much CO2 gas (in g) will be released from 1.1 L of the carbonated water when the partial pressure of CO2 is lowered to 1.28 atm? At 25 ºC, the Henry’s law constant for CO2 dissolved in water is 1.65 x 103 atm, and the density of water is 1.0 g/cm3.
If the partial pressure of CO₂ in a bottle of carbonated water decreases from 4.60 atm to 1.28 atm, the mass of CO₂ released is 0.265 g.
The partial pressure of CO₂ gas in a bottle of carbonated water is 4.60 atm at 25 ºC. We can calculate the concentration of CO₂ using Henry's law.
[tex]C = k \times P = \frac{1.65 \times 10^{-3} M }{atm} \times 4.60 atm = 7.59 \times 10^{-3} M[/tex]
We can calculate the mass of CO₂ in 1.1 L considering its molar mass is 44.01 g/mol.
[tex]\frac{7.59 \times 10^{-3} mol}{L} \times 1.1 L \times \frac{44.01 g}{mol} = 0.367 g[/tex]
Now, we will repeat the same procedure for a partial pressure of 1.28 atm.
[tex]C = k \times P = \frac{1.65 \times 10^{-3} M }{atm} \times 1.28 atm = 2.11 \times 10^{-3} M[/tex]
[tex]\frac{2.11 \times 10^{-3} mol}{L} \times 1.1 L \times \frac{44.01 g}{mol} = 0.102 g[/tex]
The mass of CO₂ released will be equal to the difference in the masses at the different pressures.
[tex]m = 0.367 g - 0.102 g = 0.265 g[/tex]
If the partial pressure of CO₂ in a bottle of carbonated water decreases from 4.60 atm to 1.28 atm, the mass of CO₂ released is 0.265 g.
Learn more: https://brainly.com/question/18987224
The partial pressure of CO₂ gas in a bottle of carbonated water is 4.60 atm at 25 ºC. How much CO₂ gas (in g) will be released from 1.1 L of the carbonated water when the partial pressure of CO2 is lowered to 1.28 atm? At 25 ºC, the Henry’s law constant for CO₂ dissolved in water is 1.65 x 10⁻³ M/atm, and the density of water is 1.0 g/cm³.
Science 5th grade very PLZ answer correctly TYSM WILL MARK AS BRAINLIST IF ANSWERED TODAY!
Answer:
A
Explanation:
Conducts electricity:
-Steel
-Gold
-Copper
-Aluminum
Does not conduct electricity:
-Plastic
-Glass
-Rubber
-Wood
Metallic bonding causes metals to conduct electricity. Some metals are more highly conductive than others.
Hope this helps :)
Answer:
The first table correctly classifies the materials.
Explanation:
In table 1, all the elements on the left side are transition metals, expect for steel. Steel is not an element, it's an alloy (Which is a combination of two or more elements).Transition metals are very good conductors of heat and electricity. The reason why transition metals make such good conductors is because their outer electrons can move freely in their atom.
The right side of table 1 correctly classifies the materials that do not conduct electricity. The reason why those materials are poor conductors is because they all have their electrons tightly bound to their atoms.
In table 2, it classifies copper has a poor conductor which is wrong. It also classifies wood as a good conductor which also wrong for the reasons I stated above.
Identify the major ionic species present in an aqueous solution of C6H12O6 (glucose).
A. 6 C-
, 12 H+
, 6 O–
B. 6 C+
, 12 H+
, 6 O2–
C. 6 CH2+, 6 O2–
D. C6
+
, 12 H+
, 6 O2–
E. no ions are present
Glucose is a molecular substance therefore, there are no ionic species in glucose.
Ionic substances dissolve in water to yield ions. Molecular substances do not produce ions in solution. The conductivity of ionic solutions owes to the presence of ions in solutions. Molecular solutions do not conduct electricity due to the absence of ions.
Glucose is a molecular substance hence they are are no ions present hence glucose does not conduct electricity.
Learn more: https://brainly.com/question/13440572?
5. To investigate electrostatic forces between molecules in water and in ethanol, a student pours identical amounts of the liquids into two identical beakers. The student then places objects of different weights in the beakers. Which characteristic is the student most likely testing?
A. melting point
B. boiling point
C. surface tension
D. vapor pressure
The student then places objects of different weights in the beakers, surface tension is the characteristic is the student most likely testing.
What is surface tension ?Surface tension is the propensity for liquid surfaces that are at rest to condense into the smallest surface area. Razor blades and insects, which have a density greater than that of water, can float on the surface of the water without even becoming partially buried because of surface tension.
A liquid surface's ability to operate like a stretched elastic membrane is known as surface tension. Small liquid drops and soap bubbles have almost spherical shapes, which are indicators of these phenomena. Some insects can stand on the surface of water due to this characteristic.
Surface tension is a crucial factor in many industrial processes, such as detergent formulation, paint optimization, improved oil recovery, medicinal compound performance, and food product stability.
Thus, option C is correct.
To learn more about surface tension, follow the link;
https://brainly.com/question/11348644
#SPJ2
Explain why most cells must be microscopic (so small they must be viewed with a microscope) in order to maintain life properly.
Answer:
if the cell grows beyond a certain limit, not enough material will be able to cross the membrane fast enough to sustain the increased cellular volume
Answer: In most cells, this passage of all materials in and out of the cell must occur through the plasma membrane
Explanation:
A student wants to show the transfer of heat energy without matter which investigation design would best help the student
A) an investigation of radiation through a current in a fluid
B) an investigation of radiation through electromagnetic waves
C) an investigation of conduction through collisions between particles in space
D) an investigation of conduction through the movement of particles through a solid
Answer:
C
Explanation:
According to the concept of thermal energy, transfer of heat energy can be depicted by investigation of conduction through collisions between particles in space.
What is thermal energy?Thermal energy is defined as a type of energy which is contained within a system which is responsible for temperature rise.Heat is a type of thermal energy.It is concerned with the first law of thermodynamics.
Thermal energy arises from friction and drag.It includes the internal energy or enthalpy of a body of matter and radiation.It is related to internal energy and heat .It arises when a substance whose molecules or atoms are vibrating faster.
These vibrating molecules and atoms collide and as a result of which heat is generated in a substance , more the collision of particles , higher is the thermal energy.
Learn more about thermal energy,here:
https://brainly.com/question/3022807
#SPJ5
*1. The internal energy with a system associated with the motion of particles and that can be added to a substance is called_____.
A. Thermal energy
B. Electrostatic forces
C. Temperature
D. Kinetic energy
•
•
•
*2. Which statement describes the effect of adding more energy to a system, assuming a phase change does not occur?
A. The particles within the system will have greater motion, and the temperature will decrease.
B. The particles within the system will have greater motion, and the temperature will increase.
C. The particles within the system will have less motion, and the temperature will increase.
D. The particles within the system will have less motion, and the temperature will decrease.
•
•
•
*3. Which statement correctly describes how attractions that hold particles break?
A. Attractions due to electrostatic forces. When particles have low enough energy, these forces can no longer keep particles together.
B. Attractions due to gravitational forces. When particles have low enough energy, these forces can no longer keep particles together.
C. Attractions due to gravitational forces. When particles move fast enough, these forces can no longer keep particles together.
D. Attractions due to electrostatic forces. When particles move fast enough, these forces can no longer keep particles together.
•
•
•
*4. Which statement explains why a rubber band analogy is not a perfect comparison for bonds in a substance when considering phase changes?
A. For a phase change from liquid to gas, the bonds break completely and particles can move independently of each other.
B. For a phase change from liquid to gas, the bonds do not break completely and the particles can still slide past each other.
C. For a phase change from solid to liquid, the bonds break completely and particles can move independently of each other.
D. For a phase change from solid to liquid, the bonds do not break completely in the particles can still slide past each other.
•
•
•
*5. The boiling point of benzene is 80°C. Which pair of samples will have the same average kinetic energy as benzene molecules?
A. Two samples of liquid benzene, one at 70°C in the other at 80°C.
B. A sample of liquid benzene at 70°C and a sample of gaseous benzene at 90°C.
C. Two samples of gaseous benzene, one at 80°C in the other at 90°C.
D. A sample of liquid benzene at 80°C and a sample of gaseous benzene at 80°C.
Answer:
1. thermal energy
2. the particles within the system will have greater motion, and the temp will increase.
3. attractions occur due to electrostatic forces. when particles move fast enough, these forces can no longer keep particles together.
4. for a phase change from a solid to liquid, the bonds do not break completely and particles call still slide past each other.
5. a sample of liquid benzene at 80°C and a sample of gaseous benzene at 80°C
Explanation:
hope this helps
Temperature is a measure of the average kinetic energy of molecules.
The particles of a substance are in constant random motion. As more thermal energy is added to the particles, the motion of the particles increases. If more energy is added to a system during phase change, the particles within the system will have greater motion, and the temperature will increase.
Attractions between particles is greater when the kinetic energy of molecules decreases. Therefore, a statement that correctly describes how attractions that hold particles break is; "attractions due to electrostatic forces. When particles move fast enough, these forces can no longer keep particles together."
The rubber analogy is commonly used to describe covalent bonds where stretching of bonds occur. This analogy is not apt in describing phase changes because for a phase change from a solid to liquid, the bonds do not break completely and particles call still slide past each other.
The average kinetic energy of molecules depend on temperature hence a sample of liquid benzene at 80°C and a sample of gaseous benzene at 80°C will have the same average kinetic energy.
Learn more: https://brainly.com/question/865531?
Question 3 of 10
Which event indicates an endothermic chemical reaction?
A. Decrease in temperature
B. Release of heat
C. Increase in thermal energy
D. Production of light
Plz help
Answer:
A. Decrease in temperature
Explanation:
The statement indicates an endothermic chemical reaction is "Decrease in temperature".
What is endothermic reaction?Endothermic reactions generate products by absorbing heat energy from the environment.
The temperature of the reaction mixture rises as energy is released in an exothermic process. The temperature drops when energy is absorbed in an endothermic reaction. A thermometer can be used to monitor temperature changes in the reaction mixture.
An endothermic reaction happens when the temperature of an isolated system drops while the temperature of its surroundings rises. The overall heat of reaction in endothermic reactions is positive (q > 0).
Hence the correct option is A.
To know more about endothermic reactions here
https://brainly.com/question/23184814
#SPJ2
Stems are important plant structures because they _________.
A.
are the main sites of photosynthesis for plants
B.
are the only site of water and nutrient transport
C.
allow plants to absorb water and nutrients from the soil
D.
give the plant structure and support
Answer:
D
Explanation:
supports the plant,leaves and flowers
2. What is the temperature (°C) of 1.50 moles of gas stored in a 10.0 L container at 1558 mm
Hg? (R=0.082 L atm/ mol K, 1.00 atm = 760 mm Hg
(4 points)
Answer:
-106°C
Explanation:
1558 mmHg / 1 × 1 atm / 760. mmHg = 2.05 atm
PV = nRT
2.05 atm (10.0 L) = 1.50 mol (0.082 atmL/molK) T
20.5 atmL = (0.123 atmL/K) T
K/0.123 atm L × 20.5 atmL = (0.123 atmL/K) T × K/0.123 atmL
166.666 K = T
167 K = T (sig figs)
K = °C + 273
167 - 273 = °C - 273
-106 = °C
How many molecules of oxygen can be made from 9.52g of nickel (III) oxide?
Answer:
165.385 g/mol
PLEASE ITS DUEE TODAY at 6:00PM!!!!!
Please draw the complete chemical structure of the tripeptide having the amino acidsequence: Asp-Leu-Ser
Answer:
I got you... 2 amino acids are linked to each other by a peptide linkage. A peptide linkage is formed when carboxyl group of one amino acid combine with the amine group of the other and during this process, a water molecule is removed.
The given tripeptide will have 2 peptide bonds. To draw the structure of given tripeptide, we will arrange them in the given order and then we will remove 2 water molecules to form 2 peptide bonds.
Explanation:
Hope this helps:)
What kind of fault movement will create a tsunami?
Answer:
I THINK IT'S BECAUSE THE EARTH UNDER THE SEA SHIFTS AND THE VIBRATION OF THE WATER GETS BIGGER UNTIL IT BECOMES A TSUNAMI. BRAINLIST ???
A reaction mixture initially contains 0.236 mol FeS and 0.670 mol HCl. Once the reaction has reached completion, what amount (in moles) of the excess reactant is left
Answer:
= 0.198 mole H₂S in excess
Explanation:
A quick way to determine limiting reactant is to convert reactant values given to moles and divide by respective coefficient. The smaller value is the limiting reactant other reactants will be in excess. However, when working problem, use mole values given to solve, not results of division.
FeS + 2HCl => FeCl₂ + H₂S
0.236mole/1 0.670mole/2
= 0.236 = 0.335
limiting reactant is FeS; HCl will be in excess.
Problem solution
0.236mole FeS used + 2(0.236 mole HCl used)
=> 0.236 mole FeCl₂ + 0.236 mole H₂S + (0.670 - 0.472) mole HCl in excess or, 0.198 mole H₂S in excess.
Hope this helps. :-)
name 2 elements that are liquid at room temperature and describe their colour
Answer:
Bromine
Mercury
Bromine (symbol Br and atomic number 35) is a reddish-brown liquid, with a melting point of 265.9 K. Mercury (symbol Hg and atomic number 80) is a toxic shiny silvery metal, with a melting point of 234.32 K.
Calculate the molarity of a solution that has 18.0 g of glucose, C6H12O6, dissolved in 80.0 g of water.
Answer:
same question
Explanation:
How does using more water in a beaker affect the solubility in an experiment?
Hypothesis of 6. You decide to clean your bedroom. You notice that your floor is covered with clothes.
You try to get rid of the clothes by throwing them into the air. You throw clothes
from 1/3 of the room into the closet and a second 1/3 of the room straight up in
the air. In the last 1/3 of the room, you leave the clothes on the floor. After 30
minutes of “cleaning,” the floor of the room is now visible.
IV: Where clothes are thrown
DV: visible floor
Hypothesis????
Answer: So you could for example say, “IF I through my clothes into the closet. THEN the floor will be visible” I capatlized if and then because you need them in a hypothesis.
Explanation:
Respiration describes the process that living cells use to release energy by combining sugar and oxygen. The primary chemical changes that happen during respiration are shown in the equation below.
C6H12O6 + 6O2 ---> 6CO2 + 6H2O + energy
Which statement correctly compares the reactants and products of the equation?
A.
The mass of the reactants is less than the mass of the products.
B.
The mass of the reactants is greater than the mass of the products.
C.
The mass of the reactants is the same as the mass of the products.
D.
The number of reactant molecules is greater than the number of products.
Answer:
C the mass of the reactant molecules is the same as the mass of the product
Which of the following has kinetic energy?
O A compressed spring
O An arrow shot from a bow
O water in a reservoir at a hill top
O Amonkey hanging from a tree
Kinetic energy is energy that an object possesses due to its motion.
Lets look at each option:
A compressed spring has potential energy.
An arrow shot from a bow does have Kinetic energy.
Water in a reservoir at a hill top is potential energy.
A monkey hanging from a tree is potential energy.
This means that the answer is B) An arrow shot from a bow
I hope this helps! :)
According to law of conservation of energy,energy is converted from one form to another so by this fact an arrow shot from a bow has kinetic energy generated from potential energy.
What is law of conservation of energy?
According to law of conservation of energy, it is evident that energy is neither created nor destroyed rather it is restored at the end of a chemical reaction .
Law of conservation of mass and energy are related as mass and energy are directly proportional which is indicated by the equation E=mc².Concept of conservation of mass is widely used in field of chemistry, fluid dynamics.
Law needs to be modified in accordance with laws of quantum mechanics under the principle of mass and energy equivalence.This law was proposed by Julius Robert Mayer in the year 1842.
Learn more about law of conservation of energy,here:
https://brainly.com/question/29775341
#SPJ2
please help me
Select the correct answer.
Who founded the specialized field of anatomy?
A. Herophilus
B. Aristotle
C. Claudius Galen
D. William Harvey
Answer:
the correct answer is A. please mark me brainlist
Explanation:
Answer:
geon, Andreas Vesalius. Vesalius describes what he observes during the public dissection of human corpses. By dissecting human bodies, preparing muscles, tendons, and nerves down to the smallest detail, Vesalius is able to prove more than 200 errors in Galen’s anatomical works.
Explanation:
With his comprehensive scientific studies of human bodies, the young professor of medicine not only revolutionizes anatomy, but consequently, the whole science of medicine.
I know I never completely answered your question, I just wanted to explain it was E. None of the above.
The Periodic table below shows major regions in different colors. In this periodic table, which type of element is shown in green boxes?
[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪ {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]
The Correct choice is~ B
The elements shown in green boxes are ~ Metalloids
which has the shorter bond lengths in Alkane,alkene and alkynes
Answer:
alkanes
Alkynes have the strongest bond. Followed by alkenes and then alkanes. This is because in alkynes there are 3 bonds between at least two carbons