how many seconds are required to deposit grams of cadmium metal from a solution that contains ions, if a current of 0.769 a is applied. s

The mathematical relationship between pH and concentration for a strong acid, considering the log function used when calculating pH, is as follows:

The pH of a solution is defined as the negative logarithm (base 10) of the hydrogen ion (H+) concentration. Mathematically, it is expressed as:

pH = -log10[H+]

For a strong acid, it completely dissociates in water, which means the concentration of hydrogen ions (H+) will be equal to the concentration of the strong acid itself. Let's represent the concentration of the strong acid as [A-].

Therefore, in the case of a strong acid, the mathematical relationship between pH and concentration is:

pH = -log10[A-]

This equation shows that as the concentration of the strong acid increases, the pH value decreases, indicating a more acidic solution. Conversely, as the concentration of the strong acid decreases, the pH value increases, indicating a less acidic (or more alkaline) solution.

To know more about the strong acid refer here :

https://brainly.com/question/31143763#

#SPJ11

Answer: There are few or no clouds.

Explanation: When there are little to no clouds, it generally signals the presence of a high-pressure system, which means that residents can expect fair weather and no precipitation. Certain clouds, such as low-level, short, cumulus clouds, indicate that fair weather is moving into the area

The addition of water causes melting by changing the location of the liquid-solid boundary (option d).

Melting is the process of a solid turning into a liquid due to an increase in temperature or a decrease in pressure. In the context of rocks, the presence of water lowers the temperature at which rocks melt.
Water molecules can break the bonds between the rock's mineral components, reducing the energy needed for the solid rock to transition into a liquid state. As a result, the rock melts at a lower temperature than it would without the presence of water.
The location of the liquid-solid boundary is the point where the solid rock and liquid rock (magma) are in equilibrium. By adding water, the temperature at which the rock will melt decreases, causing the liquid-solid boundary to shift to a different temperature and pressure.
In summary, the addition of water causes melting by changing the location of the liquid-solid boundary. This occurs because water lowers the melting temperature of rocks, allowing them to transition into a liquid state at lower temperatures than they would without the presence of water.

To learn more about liquid-solid boundary, refer:-

https://brainly.com/question/28026550?

#SPJ11

The statement that is NOT true about the electrical charges in chemistry is:
B. In an atom, the number of protons and neutrons must be equal.

In an atom, protons carry a positive charge (A) and are found in the nucleus, along with neutrons, which carry no charge. Electrons, which carry a negative charge, orbit the nucleus. An atom is neutral when the positive and negative charges balance (C), meaning the number of protons equals the number of electrons.

However, the number of protons and neutrons does not have to be equal in an atom. The difference in the number of neutrons between atoms of the same element creates isotopes. The number of protons determines the element's identity, while the number of neutrons can vary.

An ion (D) is an atom or molecule that has an unequal number of protons and electrons, resulting in a net positive or negative charge. When an atom loses or gains electrons, it becomes an ion. Cations are ions with a net positive charge (due to loss of electrons), while anions are ions with a net negative charge (due to gain of electrons).

Learn More about atomhere :-

https://brainly.com/question/16666188

#SPJ11

When CH3CH2OH is refluxed with acidified potassium dichromate(VI), the final product that is formed is CH3COOH, which is also known as acetic acid.

This reaction is commonly used in organic chemistry as a test for primary alcohols, as they are oxidized to aldehydes and then to carboxylic acids, while secondary alcohols are oxidized to ketones. Potassium dichromate(VI) acts as an oxidizing agent in this reaction, meaning that it accepts electrons from the alcohol and becomes reduced to a different compound. The reaction proceeds through several steps, including the formation of aldehydes and eventually the carboxylic acid. Therefore, the correct answer to the question is option C, CH3COOH. It is important to note that this reaction should be carried out in a fume hood or with proper ventilation, as the use of potassium dichromate(VI) can be dangerous due to its toxicity and potential to form harmful gases.

Learn more about potassium dichromate here

https://brainly.com/question/14049010

#SPJ11

A chemical formula that shows the relative number of each type of atom in a molecule, using the smallest possible ratio, best describes an empirical formula. The correct option is D

The simplest whole number ratio of atoms in a chemical molecule is its empirical formula.

The empirical formula for glucose, for instance, is CH2O, which indicates that the proportion of carbon to hydrogen to oxygen atoms in glucose is 1:2:1. However, the empirical formula is a multiple of the true molecular formula for glucose, which is C6H12O6.

Learn more about empirical formula here : brainly.com/question/13058832

#SPJ1

The equivalents of h are present in a 0.25 m solution of hcl is 0.25 eq.

HCl is a strong electrolyte, which means it completely dissociates into its ions when dissolved in water. In this case, it dissociates into H⁺ and Cl⁻ ions. The term "equivalent" is used to express the amount of an ion in a solution. One equivalent of an ion is equal to the number of moles of that ion that can combine with or displace one mole of hydrogen ions (H⁺).

To determine the number of equivalents of H⁺ ions present in a 0.25 M solution of HCl, we first need to calculate the number of moles of HCl present in 1 liter of the solution:

0.25 M HCl = 0.25 moles of HCl per liter of solution

Since HCl dissociates into one H⁺ ion and one Cl⁻ ion, there are also 0.25 moles of H⁺ ions per liter of solution. To convert this to equivalents, we need to divide by the number of moles of H⁺ ions that can combine with or displace one mole of H⁺ ions, which is 1:

0.25 moles H⁺ ions / 1 mole H⁺ ions per equivalent = 0.25 equivalents of H⁺ ions per liter of solution

Therefore, by concluding we can say that the answer to the question is 0.25 eq.

To know more about the equivalents refer here :

https://brainly.com/question/30310995#

#SPJ11

Answer: clockwise north

Explanation:

A high pressure system has higher pressure at its center than the areas around it. Winds blow away from high pressure. Swirling in the opposite direction from a low pressure system, the winds of a high pressure system rotate clockwise north of the equator and counterclockwise south of the equator. This is called anticyclonic flow. Air from higher in the atmosphere sinks down to fill the space left as air is blown outward. On a weather map, you may notice a blue H, denoting the location of a high pressure system.

The Kc, for the reaction BaSO4(s) ↔ Ba2+(aq) + SO42-(aq) can be written as follows Kc = [Ba2+] [SO42-]/[BaSO4] Here, the numerator represents the concentration of the products, Ba2+ and SO42-, at equilibrium, while the denominator represents the concentration of the reactant, BaSO4, also at equilibrium.

The numerator or denominator is 1, the corresponding term can be omitted from the expression, as it would not affect the value of Kc. For example, if the concentration of BaSO4 at equilibrium is 1 M, the denominator of the expression would be equal to 1, and could be omitted Kc = [Ba2+] [SO42-] However, if the concentrations of all species at equilibrium were equal to 1, the value of Kc would also be 1, as shown below Kc = [Ba2+][SO42-]/[BaSO4] = (1)(1)/(1) = 1 In general, the value of Kc provides information about the extent of a chemical reaction at equilibrium, with larger values indicating that the products are favored, and smaller values indicating that the reactants are favored.

learn more about equilibrium here.

https://brainly.com/question/30694482

#SPJ11

Answer:

A possible formula for compound X is option (B) CH3CH2CH2OH.

Explanation:

This is because compound X must be an alcohol that can be oxidized to form a carboxylic acid (compound Y), and propan-1-ol is the only alcohol among the given options that fits this description. The oxidation of propan-1-ol with acidified potassium dichromate (VI) produces propanoic acid (compound Y), which is an acidic compound that reacts with sodium carbonate to produce CO2 gas.

Therefore, the information provided in the question allows us to deduce the formula of compound X and identify the products of the reactions it undergoes with acidified potassium dichromate (VI) and sodium carbonate.

To learn about the dichromate (VI),

https://brainly.com/question/31433286

https://brainly.com/question/31327742

The Kb value of the conjugate base of the given acid is 2.32 × [tex]10^{-5}[/tex]

Ka × Kb = Kw

where Kw is the ion product constant for water, which is 1.0 × [tex]10^{-14}[/tex] at 25°C.

To find the Kb value of the conjugate base, we can rearrange this equation as follows:

Kb = Kw / Ka

Substituting the given Ka value of 4.31 × [tex]10^{-10}[/tex], we get:

Kb = (1.0 × [tex]10^{-14}[/tex]) / (4.31 × [tex]10^{-10}[/tex])

Kb = 2.32 × [tex]10^{-5}[/tex]

A conjugate base is a species that is formed when an acid donates a proton (H+) to a base. In other words, it is the species that remains after an acid has lost a hydrogen ion. For example, when hydrochloric acid (HCl) donates a hydrogen ion to water (H2O), the resulting species is the chloride ion (Cl-), which is the conjugate base of HCl.

The conjugate base of an acid is always one less proton (H+) than the original acid. For example, the conjugate base of sulfuric acid (H2SO4) is the hydrogen sulfate ion (HSO4-), which has lost one hydrogen ion. The strength of an acid is related to the strength of its conjugate base. Strong acids have weak conjugate bases, while weak acids have strong conjugate bases. This is because a strong acid readily donates its proton, leaving a stable and weakly basic conjugate base.

To learn more about Conjugate base visit here:

brainly.com/question/30225100

#SPJ4

The group being referred to in this question is Group 14 of the periodic table. This group includes carbon, silicon, germanium, tin, and lead. Out of these elements, only carbon is a semimetal, while the rest are metals. The correct option is 2.

When elements in Group 14 react, they typically form +4 cations, such as in the case of carbon forming carbon dioxide (CO2). However, elements in this group can also form +2 and +3 cations under certain conditions. For example, tin can form a +2 cation in certain compounds, while lead can form a +2 or +4 cation.

It is interesting to note that while carbon is a semimetal, it is also classified as a nonmetal due to its low reactivity and inability to conduct electricity in its pure form. Carbon is unique in this regard, as it has both metal and nonmetal characteristics depending on its chemical environment.

In conclusion, the element in Group 14 that is a semimetal is carbon, while the other elements in the group are metals that typically form +4 cations.

To know more about periodic table, refer to the link below:

https://brainly.com/question/11155928#

#SPJ11

If the neutron is at rest when it decays, it will release an electron and a neutrino. The process is known as beta decay, and it occurs when a neutron is converted into a proton.

During this conversion, one of the neutron's down quarks is converted into an up quark, releasing a W- boson that decays into an electron and a neutrino.

The neutrino that is released is always an electron neutrino, which is a type of neutrino that interacts weakly with matter. This means that it can travel through vast amounts of material without being detected. On the other hand, the electron that is released is a charged particle that interacts strongly with matter and is therefore much easier to detect.

In summary, if a free neutron is at rest when it decays, it will release an electron and an electron neutrino. This is a fundamental process in nuclear physics and has important applications in fields such as nuclear power and astrophysics.

To know more about beta decay click here:

https://brainly.com/question/27770519

#SPJ11

There are several ways to absorb and remove unwanted surface oil. One way is to use oil-absorbing sheets or blotting paper, which can easily soak up excess oil from the skin. Another way is to apply a clay mask, which can absorb oil and impurities from the skin.

There are several ways to absorb and remove unwanted surface oil. One way is to use oil-absorbing sheets or blotting paper, which can easily soak up excess oil from the skin. Another way is to apply a clay mask, which can absorb oil and impurities from the skin. Additionally, using a toner that contains ingredients like witch hazel or salicylic acid can help to remove surface oil and keep pores clear. It's important to avoid harsh products or over-washing the skin, as this can actually stimulate the production of more oil. Instead, focus on gentle, non-drying methods to keep skin balanced and healthy.

To learn more about Surface oil click here

https://brainly.com/question/14550661

#SPJ11

Polymers that are formed by a combination of functional groups such that a small molecule (e.g., water) is eliminated are known as condensation polymers.

A macromolecule is produced during polymerization by chemically combining smaller molecules, known as monomers or building blocks. A polymer is made up of a great number of these macromolecules.

Covalent bonds are used to join the monomers together to create polymers, which are bigger molecules. Monomers produce water molecules as byproducts as a result of this process. Dehydration synthesis, which literally translates to "to put together while losing water," is the term used to describe this kind of process.

To know more about Condensation polymers visit:-

https://brainly.com/question/10401532

#SPJ11

The reaction that represents displacement reaction is 1, 2, 3 and 4 (option F)

This is a reaction in which element which are higher in the electro-chemical series displaces or replace element which are lower in the series. Displacement reaction are of two types:

Now, we shall consider the various reaction given. Details below:

For reaction 1:

Fe + SnSO₄ -> FeSO₄ + Sn

We can see that Fe has displaced Sn. Thus the reaction is a displacement reaction

For reaction 2:

Cl₂ + 2KBr -> Br₂ + 2KCl

We can see that Cl₂ has displaced Br₂. Thus the reaction is a displacement reaction

For reaction 3:

H₂SO₄ + Mg -> MgSO₄ + H₂

We can see that Mg has displaced H₂. Thus the reaction is a displacement reaction

For reaction 4:

NaHCO₃ + HCl -> NaCl + CO₂ + H₂O

The above reaction is a double displacement reaction since there is an exchange of ions between NaHCO₃ and HCl to produce NaCl, CO₂ and H₂O

Thus, we can conclude that reaction 1, 2, 3 and 4 is a displacement reaction (Option F)

Learn more about displacement reaction:

https://brainly.com/question/11904766

#SPJ1

1.47g is the mass in gram of KClO[tex]_3[/tex] that are needed to make 293 gO[tex]_2[/tex]. A body's mass is an inherent quality. Prior to the discoveries of the atom or particle physics.

A body's mass is an inherent quality. Prior to the discoveries of the atom or particle physics, it was widely considered to be tied to the amount of matter within a physical body. It was discovered that, despite having the same quantity of matter in theory, different atoms and elementary particles have varied masses.

There are various conceptions of mass in contemporary physics that are theoretically different but physically equivalent. The resistance of the body to deceleration (change of velocity) whenever a net force is applied can be measured experimentally as mass.

2KClO[tex]_3[/tex] →2KCl + 3O[tex]_2[/tex]

Molar mass of KClO[tex]_3[/tex]  = 122.55g/mol

3.76/122.55= 0.031mol

Mole ratio KClO3:O2 = 2:3

= 0.031×3/2

= 0.046m

= 0.046× 31.998

= 1.47g

To know more about mass, here:

https://brainly.com/question/6199002

#SPJ1

In order to identify the carbon atoms that most likely came from acetylene in the synthesis process, we need to understand a bit more about the properties of acetylene and its reactions.

Acetylene is a hydrocarbon with the chemical formula C2H2, meaning it is composed of two carbon atoms and two hydrogen atoms. When acetylene undergoes a reaction known as hydroboration-oxidation, it can be transformed into a variety of organic compounds, including alcohols and aldehydes.

In order to determine which carbon atoms in the starting material most likely came from acetylene, we would need to know more about the specific synthesis process being used. However, it's possible that the carbon atoms that came from acetylene would be the ones directly attached to the carbon-carbon triple bond in the molecule.

Without more information, it's difficult to say for sure which specific carbon atoms in the starting material came from acetylene. However, by understanding the properties and reactions of acetylene, we can make some educated guesses about which atoms might be involved in the synthesis process.

To know more about acetylene : https://brainly.com/question/15346128

#SPJ11

Human insulin will not exhibit cold denaturation at any temperature greater than 0°C.

To calculate the free energy change for unfolding human insulin at 37°C, we can use the equation:

ΔG = ΔH - TΔS

where ΔH is the enthalpy change, T is the temperature in Kelvin, and ΔS is the entropy change.

First, we need to calculate the entropy change, ΔS. We can use the equation:

ΔS = ΔH / Tm

where Tm is the melting temperature in Kelvin.

Converting the given values to the appropriate units, we have:

Tm = 68.7 + 273.15 = 341.85 K

ΔH = 95.8 kJ/mol

ΔCp,m = 5 kJ/mol K

Using the equation ΔS = ΔH / Tm, we get:

ΔS = (95.8 kJ/mol) / (341.85 K) = 0.280 kJ/mol K

Next, we can use the equation ΔG = ΔH - TΔS and plug in the given values to get:

ΔG = (95.8 kJ/mol) - (310.15 K)(0.280 kJ/mol K) = 14.6 kJ/mol

Therefore, the free energy change for unfolding human insulin at 37°C is 14.6 kJ/mol.

To determine whether the protein will exhibit cold denaturation at any temperature greater than 0°C, we can use the equation:

Tc = (ΔH / ΔS) + Tm

where Tc is the temperature at which cold denaturation would occur. IfTc is less than 0°C, then cold denaturation would not occur.

Using the given values, we have:

Tc = (95.8 kJ/mol / 0.280 kJ/mol K) + 341.85 K = 699.6 K

Converting this back to Celsius, we get Tc = 426.5°C, which is much higher than 0°C. Therefore, human insulin will not exhibit cold denaturation at any temperature greater than 0°C.

Learn more about Human insulin

https://brainly.com/question/14234384

#SPJ4

Answer:

sharing of valence electron pairs

This form, which is frequently used to depict the bonding between atoms in a molecule, is also known as the Lewis structure or the Lewis dot diagram.

An electron is defined as a subatomic particle of negative charge, which surrounds the nucleus of the atom (there are neutrons and protons).

The localized electron model assumes that a molecule is bonded through the sharing of valence electron pairs. This model is also known as the Lewis structure or the Lewis dot diagram, which is commonly used to represent the bonding between atoms in a molecule. In this model, each atom's valence electrons are shown as dots, and the shared electron pairs between atoms are represented by a line. The localized electron model helps to explain the formation of covalent bonds in molecules.

Learn more about electrons on:

https://brainly.com/question/13998346

#SPJ11

The reaction for Carbon-14, used in carbon dating, decays by beta emission and in Uranium-238 decays by alpha emission.

Alpha radiation releases when the nucleus of an atom becomes unstable and alpha particles are released in order to restore stability. Alpha decay occurs in elements have high atomic numbers, such asuranium, radium, and thorium etc. The reaction that describes an alpha emission because radiations are 5740 years. Now, Carbon-14 has a half life of 5730 yrs, and it used to date fossils of 50 hundred yrs old. It undergo beta emission. In case of Uranium- 238, has half life of 236 yrs. Because there is so much difference between half lives of both so we can't use both of together in one reaction. So, it goes on alph emission. The reactions are

¹⁴₆C → ¹⁴₇N - e⁻

Hence, required reaction is alpha emmision.

For more information about alpha emission, visit :

https://brainly.com/question/27875918

#SPJ4

The total pressure inside the container is 1.17 atm.

The total pressure inside the container can be calculated using Dalton's Law, which states that the total pressure of a mixture of gases is equal to the sum of the partial pressures of each gas.

To solve the problem, we simply add the partial pressures of oxygen and chlorine gas to find the total pressure:

Total pressure = partial pressure of oxygen + partial pressure of chlorine

Total pressure = 401 mmHg + 486 mmHg

Total pressure = 887 mmHg

To convert mmHg to atm, we divide by the conversion factor of 760 mmHg/atm:

Total pressure = 887 mmHg / 760 mmHg/atm

Total pressure = 1.17 atm

As a result, the total pressure within the container is 1.17 atm.

To know more about the Pressure, here

https://brainly.com/question/23419864

#SPJ1

Protein molecule acting as enzymes speeds up chemical reactions in living things.

Enzymes are proteins that help speed up metabolism, or the chemical reactions in our bodies. They build some substances and break others down. All living things have enzymes. The enzyme is not destroyed during the reaction and is used over and over.

Our bodies naturally produce enzymes. But enzymes are also in manufactured products and food.

Without enzymes, many of these reactions would not take place at a perceptible rate. Enzymes catalyze all aspects of cell metabolism.

Learn more about Proteins, here:

https://brainly.com/question/29776206

#SPJ1

The use of different concentrations for sulfuric acid and sodium hydroxide in Part I of the experiment is due to the differences in their properties and reactivity. Sulfuric acid is a strong acid and is highly reactive, so a lower concentration of 3 M is used to prevent excessive reaction with the samples being tested.

On the other hand, sodium hydroxide is a strong base and is also highly reactive, but a higher concentration of 6 M is used to ensure that there is enough reactivity to complete the neutralization reaction with the acidic samples. The concentration of a solution plays a critical role in determining the reaction rate and extent of the chemical reaction. When the concentration of a reactant is increased, it provides more molecules for the reaction to occur, leading to an increase in the reaction rate. Therefore, the use of different concentrations for sulfuric acid and sodium hydroxide is essential to achieve accurate results and ensure that the neutralization reaction is completed within a reasonable time frame.

Learn more about sodium hydroxide here-

https://brainly.com/question/29327783

#SPJ11

The statement (a) is true. The entropy of the universe always increases for any spontaneous process. This is known as the second law of thermodynamics, which states that in any spontaneous process, the total entropy of the system and its surroundings always increases.

The statement (b) is false. The entropy change of the system is not necessarily equal and opposite to that of the surroundings for any irreversible process. In fact, for any irreversible process, the entropy change of the surroundings is always greater than that of the system. The entropy of the system can either increase or decrease in a spontaneous process, but the total entropy of the system and its surroundings always increases.  This is known as the second law of thermodynamics, which states that in any spontaneous process, the total entropy of the system and its surroundings always increases. Finally, the statement (d) is true. The entropy change for an isothermal process depends on both the absolute temperature and the amount of heat reversibly transferred. In an isothermal process, the temperature remains constant, and the entropy change is determined by the amount of heat transferred and the temperature of the system.

learn more about spontaneous here

https://brainly.com/question/30738654

#SPJ11

In Trials 1 and 2, respectively, 0.409 g and 0.406 g of magnesium metal were employed. In Trial 1 and Trial 2, the theoretical yield of MgO was 0.680 g and 0.675 g, respectively. In Trial 1 and Trial 2, the actual yield of MgO was 0.672 g and 0.665 g, respectively.

Metals are substances that develop naturally beneath the Earth's surface. Most metals are shiny or glossy. Because they are inorganic, metals are composed of materials that have never been living.

To calculate the mass of magnesium metal used in each trial, we need to subtract the mass of the empty crucible with lid from the mass of the crucible, lid, and magnesium metal.

For Trial 1:

Mass of Mg metal = (Mass of Mg, crucible, and lid) - (Mass of empty crucible with lid)

Mass of Mg metal = 27.093 g - 26.684 g = 0.409 g

For Trial 2:

Mass of Mg metal = (Mass of Mg, crucible, and lid) - (Mass of empty crucible with lid)

Mass of Mg metal = 27.098 g - 26.692 g = 0.406 g

To calculate the theoretical yield of magnesium oxide, we need to use the balanced chemical equation for the reaction. Assuming that all the magnesium reacted with oxygen to form magnesium oxide, the theoretical yield can be calculated as follows:

Mg + 1/2 O₂ → MgO

Molar mass of Mg = 24.31 g/mol

Molar mass of MgO = 40.31 g/mol

For Trial 1:

Theoretical yield of MgO = (Mass of Mg metal used / Molar mass of Mg) x (Molar mass of MgO)

Theoretical yield of MgO = (0.409 g / 24.31 g/mol) x (40.31 g/mol) = 0.680 g

For Trial 2:

Theoretical yield of MgO = (Mass of Mg metal used / Molar mass of Mg) x (Molar mass of MgO)

Theoretical yield of MgO = (0.406 g / 24.31 g/mol) x (40.31 g/mol) = 0.675 g

The actual yield is the mass of the product (MgO) obtained experimentally.

For Trial 1:

Actual yield of MgO = Mass of MgO, crucible, and lid - Mass of empty crucible with lid

Actual yield of MgO = 27.356 g - 26.684 g = 0.672 g

For Trial 2:

Actual yield of MgO = Mass of MgO, crucible, and lid - Mass of empty crucible with lid

Actual yield of MgO = 27.357 g - 26.692 g = 0.665 g

The percent yield can be calculated using the following formula:

Percent yield = (Actual yield / Theoretical yield) x 100%

For Trial 1:

Percent yield of MgO = (0.672 g / 0.680 g) x 100% = 98.82%

For Trial 2:

Percent yield of MgO = (0.665 g / 0.675 g) x 100% = 98.52%

To calculate the average percent yield of MgO, we add the percent yields of both trials and divide by 2.

Average percent yield of MgO = (Percent yield of Trial 1 + Percent yield of Trial 2) / 2

Average percent yield of MgO = (98.82% + 98.52%) / 2 = 98.67%

Therefore, the mass of magnesium metal used in Trial 1 was 0.409 g, and in Trial 2 was 0.406 g. The theoretical yield of MgO was 0.680 g in Trial 1 and 0.675 g in Trial 2. The actual yield of MgO was 0.672 g in Trial 1 and 0.665 g in Trial 2.

Learn more about magnesium on:

https://brainly.com/question/16940312

#SPJ11

The acidity or alkalinity of a solution depends upon the concentration of hydronium and hydroxide ions. The pH of a solution is the negative logarithm to the base 10 of the hydronium ion concentration in moles per litre.

The term Kₐ is the acid dissociation constant and it gives the extent to which the acid dissociates. The smaller the value of Kₐ for an acid, the acid will be weaker.

pH = -log [H₃O⁺]

[H₃O⁺] = 10⁻pH = 0.00017

[H₃O⁺] = √Kₐ . c

0.00017 = √Kₐ × 0.001

(0.00017)² = Kₐ × 0.001

Kₐ = 0.0000289 = 2.89 × 10⁻⁵

To know more about acid dissociation constant, visit;

https://brainly.com/question/4363472

#SPJ1

The minimum pressure of NO2 needed to reverse the tendency is equal to P/2, rounded to 2 significant digits.

Kc = {[tex]NO_2][/tex]2/ [[tex]N_2O_4[/tex]]

Kc = [x]2 / [P]

x = √(Kc * P)

Plugging in Kc = [[tex]NO_2[/tex]]2 / [[tex]N_2O_4[/tex]] = (2x)² / P = 4x²/P, and solving for x:

x = √(Kc * P) = √(4x²) = 2x

Equilibrium refers to a state where the rates of the forward and reverse reactions are equal, resulting in no net change in the concentration of reactants or products. This state is also known as dynamic equilibrium because the forward and reverse reactions continue to occur, but at the same rate, maintaining a stable concentration of reactants and products.

Equilibrium is governed by the principle of Le Chatelier's principle, which states that if a system at equilibrium is disturbed by a change in temperature, pressure, or concentration, the system will respond in a way to counteract the disturbance and re-establish equilibrium. For example, if the concentration of reactants in a system is increased, the system will shift towards the product side to use up the excess reactants and restore equilibrium.

To learn more about Equilibrium visit here:

brainly.com/question/23094521

#SPJ4

At STP, there are 0.0446 moles of oxygen in 1000 mL

n = (V / Vm)

where n is the number of moles, V is the volume of the gas in liters, and Vm is the molar volume of the gas at STP (22.4 L/mol).

Converting the given volume of 1000 mL to liters:

V = 1000 mL = 1 L

Substituting the values into the formula:

n = (1 L) / (22.4 L/mol) = 0.0446 mol

STP stands for Standard Temperature and Pressure, which are standardized conditions used in chemistry to compare and measure the properties of gases. The standard temperature is defined as 0°C (273.15 K), while the standard pressure is 1 atmosphere (atm) or 101.325 kilopascals (kPa).

At STP, one mole of any gas occupies a volume of 22.4 liters. This value is known as the molar volume and is useful in various chemical calculations. Additionally, the ideal gas law, which relates the pressure, volume, and temperature of a gas, is often used at STP conditions to simplify calculations. STP is essential for defining and comparing gas properties, as different gases behave differently under different conditions.

To learn more about STP visit here:

brainly.com/question/24050436

#SPJ4

Diphenyl phosphate. In the renewable block copolymer experiment, diphenyl phosphate is the reagent that needs to be weighed accurately to obtain a molecular weight closer to the theoretical value.

This is because diphenyl phosphate is used as the initiator for the polymerization reaction, and any deviation in its weight can significantly affect the molecular weight of the final product. The other reagents, d-decalactone and benzene di methanol, also play important roles in the reaction but do not have as significant of an impact on the final molecular weight when their quantities are slightly off.
In order to obtain the molecular weight closer to the theoretical value in the renewable block copolymer experiment, it is important to weigh the following reagents very accurately: B) d-decalactone and C) benzene dimethanol. Accurate weighing of these reagents ensures a proper reaction stoichiometry, leading to a more controlled molecular weight of the resulting copolymer.

Visit here to learn more about Diphenyl phosphate:

brainly.com/question/2273216

#SPJ11