How many moles of H2O are formed?

Answer;

1.Arrow A represents the process of photosynthesis.

2.This shows the process of light energy converting into chemical energy

3.Photosynthesis absorbs carbon dioxide and converts it into energy as biomass, so that its able to be used for something else later on.

Explanation:

Part I

At location G, the process of combustion is taking place where hydrocarbon or organic carbon from the fossil fuel is burnt in the presence of oxygen to produce carbon dioxide and water as the products.

CxHy = CO₂ + H₂O

Part II

At point G there is no transformation of energy since during the process of combustion energy will still be stored in form of chemical energy in the bonds of carbon Iv oxide and the water produced during the reaction.

Part III

The process shows recycling of carbon in the carbon cycle. This is because carbon from living organisms is cycled to non living organisms. When plants and animals die and are buried deep in the ground, they are then slowly converted to fossil fuels which contain organic hydrocarbon compounds including petrol, kerosene and other compounds. Then the fossils are used in the industries and undergoes combustion releasing carbon iv oxide which is then released to the atmosphere and used by the plants and animals. The process starts once again.

it the same:]

Photosynthesis is a process by which plants absorb carbon dioxide from the atmosphere and use energy from the Sun to convert it into glucose.

To learn more about Photosynthesis refer to:

https://brainly.com/question/19160081

#SPJ1

The electronic configuration of the elements Si and Y in noble-gas notation is given below:

The arrangement of an atom's or molecule's electrons in their respective orbitals is known as its electron configuration.

The electronic configuration of Si and Y are derived from their atomic numbers.

The atomic number of Si is 14

The atomic number of Y is 39

The electronic configuration of Si is 1s²2s²2p⁶3s²3p²

or [Ne] 3s²3p⁴ in noble-gas notation.

The electronic configuration of Y is 1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p⁶4d¹5s²

or [Kr] 4d¹5s² in noble-gas notation.

Learn more about electronic configuration at: https://brainly.com/question/26084288

#SPJ1

Answer:

How are the spheres of Earth interrelated? The four spheres of Earth are closely connected to each other. Birds(biosphere) fly through the air (atmosphere), and water (hydrosphere) flows through the soil (lithosphere or geosphere). The spheres of the earth are closely connected to each other.

The type of pollutant in waterways which can be toxic at high levels is nitrates.

Pollutant is a substance that is introduced into the environment and has negative effects on living organisms and the environment. It can be either natural or man-made and can include air pollutants such as carbon dioxide, sulfur dioxide, nitrogen oxides, and particulate matter, as well as water pollutants such as nutrients, heavy metals, and toxic chemicals.

Nitrates are nitrogen-containing compounds and are often found in fertilizers, wastewater and agricultural runoff. Nitrates can lead to oxygen depletion in water and can be harmful to aquatic life and humans if consumed in high amounts. The River Avon in Warwickshire is known to have high levels of nitrates due to agricultural runoff.

To learn more about pollutant
https://brainly.com/question/1347424
#SPJ1

A representative element donates or accepts electron to gain stability. This is known as the octet rule. The octet rule states that atoms tend to gain or lose electrons in order.

This process is called electron configurations and is the reason behind the formation of ions and chemical bonding.According to the octet rule, atoms usually gain or lose electrons in order to have eight electrons in their valence shell, which is their outermost energy level. For the majority of elements, an eight-electron complete valence shell is the most stable electron configuration. This is so because an atom's valence shell, which is its outermost shell, contains the electrons that participate in chemical reactions and bonding. To reach a complete valence shell, which is more stable than a partially filled shell, atoms will lose, acquire, or share electrons. It is for this reason that ions form and atoms interact chemically. Understanding and predicting the chemical behavior of elements is made easier by the octet rule.

learn more about octet rule  here:

https://brainly.com/question/865531

#SPJ4

Answer:

FeSO4 is the formula for iron(II) sulfate.

If  He gas has an average kinetic energy of the 8150 J/mol under the certain conditions, the root mean square speed of O₂ gas molecules under the same conditions is  3.0 × 10²⁹ m/s.

The average kinetic energy  is expressed as :

K.E = 3 R T / 2

8150 = ( 3 × 8.314 × T ) / 2

16300 = 24.94 T

T = 653.5 K

The root mean square speed, Vrms = √(3kNaT ) /M

The root mean square speed, Vrms = √ ( 3 × 1.38 × 10⁻²³ × 6.023 × 10²³ ×

                                                                                   653.5 ) / 5.31 × 10⁻²⁶

The root mean square speed, Vrms = 3.0 × 10²⁹ m/s.

To learn more about  kinetic energy here

https://brainly.com/question/8435121

#SPJ4

Carbon and silicon are especially relevant to us because they are key building blocks of many important materials and technologies in our daily lives.

Carbon is a versatile element that is found in many different forms, such as graphite, diamond, and carbon fiber, and is used in a wide range of applications. For example, it is used as a lubricant, a fuel, and a structural material in the production of steel. Carbon is also the basis of all life on earth and is an essential component of DNA, proteins, and cell membranes.

Silicon is a semiconductor material that is widely used in the electronics industry. It is the basis of most computer chips and is also used in solar cells, transistors, and other electronic devices. Silicon is also used in the production of glass, ceramics and other materials.

Furthermore, carbon and silicon are the basis of many organic compounds and materials, which are widely used in the chemical industry, from drugs to plastics. They are also widely used in the energy industry in batteries and fuel cells.

To know more about carbon and silicon click here:

https://brainly.com/question/1966406#

#SPJ4

Answer: to keep it strong

Explanation:

The ionic bonds in sodium chloride is the strongest bond as such the substance has the highest boiling point while the mercury has the weakest bond and the least melting point.

We have to note that the melting point of the solid has to do with the temperature at which the solid is converted into the liquid state. It is the temperature at which the bonds that are holding the particles of the substance would be broken.

In this case, we can see that the trends in the boiling points does reveal the kind of bonding intercation that we have in the compound. Given that there are strong ionic bonds in sodium chloride it has the highest boiling point.

Learn more about melting points:https://brainly.com/question/29578567

#SPJ1

The prediction of chemical reaction is CO2 and H2O are the end products of every combustion reaction involving hydrocarbons or hydrogen-carbon-oxygen molecules (assuming a complete reaction).

a. C6H12 + 9O2 6CO2 + 6H2O during combustion

b. Combustion: 8CO2 + 6H2O from 2C4H6 + 11O2

c. Combustion: 6CO2 + 5H2O + C6H10O3 + 7O2

The predicting products of chemical reactions is The ability of human chemists to predict reactions' outcomes with acceptable certainty is amazing. These forecasts are, of course, founded on fundamental physical principles, but they are unquestionably not based on meticulous numerical calculations.

For example:-

1. Mg + I2 becomes MgI2.

The product must have a 1:2 cation:anion ratio since Mg can only form Mg2+ and I can only form I-.

2. Dual displacement: CuS + 2HCl CuCl2 + H2S

Be aware that the substance is not H2Cl2. Recognizing that CuCl2 is composed of three ions—Cu2+ and two Cl-—is crucial.

3. NaOH + HClO4 NaClO4 + H2O, or double displacement

You must understand that perchlorate (ClO4-) and hydroxide (OH-) are polyatomic ions in this question and won't disintegrate. Additionally, as this is an acid-base reaction, the end products ought to be salt and water.

For more such questions on prediction, Visit:

brainly.com/question/27172907

#SPJ4

Complete question:

What is predicting product of chemical reaction.

Combustion:

a.  C6H12 + O2 =

b. Combustion: C4H6 + O2 =

c. Combustion: C6H10O3 + O2 =

Water without much Calcium and Magnesium is known as Soft water.

Soft water has low concentration of Calcium carbonate and other ions. These are free from dissolved salts of metals like Calcium, Magnesium and other metals.

Hard water and soft water are differentiated based on their amount of Calcium and Magnesium constituents. Hard water has mineral stains , spots and feeling a film in your hands while washing it.

Soft water makes our clothes cleaner , water pressure heavily in the hands and a slight of Sodium taste in drinking water.

To learn more about soft and hard water,

https://brainly.com/question/20936443

Consider the following techniques to improve stability: mproving the foundation: Make certain that the foundation is strong, stable, and capable of sustaining the structure.

Maintaining balance: Keep the structure's weight equally distributed and balanced. Stress reduction: Avoid overstressing the structure and minimize current stress by suitable support and reinforcement. Material updates: Use materials that are recognized to be long-lasting and durable. Regular maintenance entails inspecting and maintaining the structure on a regular basis in order to discover and treat any concerns before they become big difficulties. Reduce dynamic loads: Keep vibrations and other dynamic loads to a minimum. Using suitable design: Ensure that the design takes into account the structure's stability needs. This is not a complete list, and the best method for boosting.

learn more about stability  here:

https://brainly.com/question/30244458

#SPJ4

Answer: 1st. 71.875 g of ethanol could burn in 100 g of oxygen.

2nd. 71.875 g of ethanol could burn in 100 g of oxygen.

Explanation: The balanced equation for the combustion of ethanol (C2H5OH) with oxygen (O2) to produce carbon dioxide (CO2) and water (H2O) is:

C2H5OH + 3O2 → 2CO2 + 3H2O

From the balanced equation, we can see that for every 1 mole of ethanol that burns, 3 moles of oxygen are required. The molar mass of ethanol is 46 g/mol and the molar mass of oxygen is 32 g/mol.

To find the mass of ethanol that could burn in 100 g of oxygen, we can use the following calculation:

mass of ethanol = (mass of oxygen / molar mass of oxygen) x (molar mass of ethanol / molar mass of oxygen)

mass of ethanol = (100 g / 32 g/mol) x (46 g/mol / 32 g/mol) = 71.875 g

Therefore, 71.875 g of ethanol could burn in 100 g of oxygen.

For the second question, the balanced equation for the reaction of magnesium (Mg) with sulfuric acid (H2SO4) to produce magnesium sulfate (MgSO4) and hydrogen (H2) is:

Mg + H2SO4 → MgSO4 + H2

From the balanced equation, we can see that for every 1 mole of magnesium that reacts, 1 mole of hydrogen is produced. The molar mass of magnesium is 24 g/mol and the molar mass of hydrogen is 2 g/mol.

To find the mass of hydrogen that is formed when 2.00 g of magnesium reacts with sulfuric acid, we can use the following calculation:

mass of hydrogen = (mass of magnesium / molar mass of magnesium) x (molar mass of hydrogen / molar mass of magnesium)

mass of hydrogen = (2.00 g / 24 g/mol) x (2 g/mol / 24 g/mol) = 0.08333 g

Therefore, 0.08333 g of hydrogen is formed when 2.00 g of magnesium reacts with sulfuric acid.

a) Oxygen and Hydrogen That is accurate, indeed. An oxygen and hydrogen gas bubble will develop at the electrode in the experiment. This is due to the fact that during the electrolysis process, a material that

The chemical element with the atomic number 8 and symbol O is called oxygen. It belongs to the periodic table's chalcogen group, is a very reactive nonmetal, and an oxidising agent that easily produces oxides with most elements as well as other compounds. After hydrogen and helium, oxygen is the third most plentiful element in the universe and the most prevalent element on Earth. Two atoms of the element combine to generate dioxygen, a colourless and odourless diatomic gas with the formula O 2, at ordinary temperature and pressure. The Earth's atmosphere is now made up of 20.95% diatomic oxygen gas, however this has fluctuated significantly over a very long time. In the form of oxides, oxygen makes up over half of the Earth's crust. [3]

Learn more about oxygen here:

https://brainly.com/question/2272415

#SPJ4

The G1, S, and G2 stages of interphase, the mitotic phases of mitosis and cytokinesis, and the G0 phase make up the cell cycle.

The cell cycle is a four-step process in which the cell grows in size (gap 1, or G1, stage), duplicates its DNA (synthesis, or S, stage), gets ready to divide (gap 2, or G2, stage), and divides (gap 3, or S, stage) (mitosis, or M, stage). The period between cell divisions is represented by the stages G1, S, and G2, which together make up interphase.

The process through which cells multiply and divide into two new cells is known as the cell cycle. G1, S, G2, and M are the several cell cycle stages. The cell is getting ready to divide in the G1 stage. The cell next enters the S phase, where it duplicates all the DNA, to accomplish this.

There are five of these phases: prophase, prometaphase, metaphase, anaphase, and telophase. As the final physical cell division after telophase, cytokinesis is frequently regarded as the sixth stage of mitosis.

To learn more about cell cycle refer to:

https://brainly.com/question/5034994

#SPJ1

630°C of temperature must be attained by the gases.

Gay-law Lussac's which was found in 1808 and published in 1809, is the term used to describe Joseph-Louis Gay-law Lussac's of combining volumes of gases. It can also describe the relationship between a gas's volume and absolute temperature under constant pressure. Simple whole numbers can be used to indicate the volume ratio of the reactant gases to the gaseous products.

This is an illustration of Gay-Law Lussac's since the volume is constant but the pressure and temperature are changing:

[tex]P1/T1=P2/T2[/tex]

The formula above may be rearranged to yield

T2=T1*P2/P1

Your data include:

P1=206. 843 kPa

T1=(27+273.15)K=300.15K

P2= 620. 528 kPa

T2=?

T 2 = 300.15 K* 620. 528 kPa/ 206. 843 kPa= 900.45K = 627.3 °C

Near to 627.3 °C the temerature is 630 °C

learn more about Gay-law Lussac's Refer:brainly.com/question/2683502

#SPJ4

Answer:

When a liquid is 140° F it really only takes five or less seconds to produce a serious burn.

Answer:

When animals die, they decompose and when they decompose their remains become seditment thus trapping the stored carbon. This sediment sometimes forms fossil fuels like coal and oil which in turn release carbon back into the atmosphere when the fossil fuels are burned.

Isotopes are atoms that belong to the same element: 11 protons, 10 neutrons, 11 electrons, 13 protons 14 neutrons, and 13 electrons

An isotope is one of two or more atom types of a chemical element that share the same atomic number, position on the periodic table, chemical behavior, and physical properties, but differ in atomic mass. One or more isotopes can be found in any chemical element. The number of protons in an atom's nucleus is the first criterion for determining its identity and labeling.

The observation that all atoms with the same atomic number have roughly the same chemical properties—if not exactly the same—gives this atomic number its significance. The symbol Z is typically used to represent this number. An ingot of pure uranium, for instance, only contains atomic number 92 atoms. Each atomic number has a place on the periodic table of elements, and each of these places is labeled with the element's common name, like calcium, radon, or uranium.

Learn more about isotopes :

brainly.com/question/28039996

#SPJ1

In water, sodium bicarbonate dissolves to form sodium and bicarbonate which makes the solution alkaline, which means it can neutralize acid.

An acid is described as a molecule or ion capable of either donating a proton, known as a Brønsted–Lowry acid, or forming a covalent bond with an electron pair, known as a Lewis acid.

sodium bicarbonate is less soluble in water because the density of the water is more than the density of the sodium bicarbonate.

Acids are known to produce hydrogen ions and bases accept hydrogen ions.

Learn more about acids at: https://brainly.com/question/25148363

#SPJ1

Illustration of the missing intermediate and add curved arrows for the production of phenylethyne by the double dehydrohalogenation of 2,2-dibromoethylbenzene is given in the attachment.

Dehydrohalogenation is an elimination reaction used in chemistry to get rid of a hydrogen halide from a substrate. Although the reaction is frequently linked to the synthesis of alkenes, it has additional uses.

Alkyl halides have historically served as the substrates for dehydrohalogenations. Halides without a C-H bond on an adjacent carbon are not acceptable substrates for alkyl halides because they cannot produce an alkene.

Halides made of aryl are similarly inappropriate. Chlorobenzene dehydrohalogenates when subjected to a strong base, releasing phenol through a benzyne intermediate. Many alkyl chlorides change into the equivalent alkene when treated with a strong base. It is a kind of elimination reaction and is also known as a-elimination reaction.

Learn more about dehydrohalogenation

https://brainly.com/question/29106730

#SPJ4

From the stoichiometry of the reaction 0.18 g of 1-hexanol is formed.by hydroboration oxidation .

By hydroboration, which involves diborane in tetrahydrofuran followed by treatments with hydrogen peroxide and sodium hydroxide, 1-hexene may be changed into 1-hexanol: Hexan-1-ol An alkene can become an alcohol by a two-step hydration reaction called the hydroboration-oxidation reaction.

The theoretical yield of a compound is its yield based on the stoichiometry of the reaction.

We must now obtain the number of moles of each reactant:

For hexane;

Mass of hexane = Density × volume = 93 mL × 0.673 g/mL = 62.589 g

Number of moles = 0.55 g/84 g/mol = 0.0065 moles

For borane;

Number of moles = concentration × volume = 1.00 M ×  1. 79 mL/1000 L = 0.00179 moles

Since the reaction is 1:1, borane is the limiting reactant, hence;

Number of moles of 1-hexanol = 0.00179 moles × 102 g/mol = 0.18 g

In the procedure, the double bond is replaced by the simultaneous addition of a hydrogen and a hydroxyl group.

learn more about hydroboration Refer:brainly.com/question/2622427

#SPJ4

To convert between a substance's count, mass, and volume, you must understand the following information: The substance's molar mass is expressed as the weight of one mole.

which is often expressed in grams per mole (g/mol). You may translate between the quantity of moles and the substance's mass by knowing the molar mass of a substance. The substance's density: The unit of measurement for density is grams per cubic centimeter (g/cm3), which represents the mass of a material per unit of volume. You can convert between a material's mass and volume by knowing the density of the substance. The compound's molar volume is: The volume of a molar is one.Typically, a chemical is measured in liters per mole (L/mol) units. You may convert between the quantity of moles and the substance's volume by knowing the molar volume of a substance.The number of atoms or molecules in one mole of a material is known as the Avogadro number.

learn more about mass  here:

https://brainly.com/question/19694949

#SPJ4

The entropy change of the given reactions can be determined from the entropies of each individual gases. The entropy change of the first reaction is - 389.74 J.

Entropy of a system is the measure of the total randomness of system. As the number of moles increases, the entropy increases.

The entropy change of a reaction is given as follows:

ΔSrxn = ∑s (products) -  ∑s (reactants)

For the given reactions, the entropy of each reactants and products are given and use their number of moles to calculate the reaction entropies as follows:

For reaction 1:

(2 ×192.5 J) - [(3×130.58) + (2× 191.5 J)]  = - 389.74 J/K

Reaction 2:

(2 ×188.83 J + 213.6 J) - 186.3 J + (2× 205 J)]  = - 5.04 J/K

Reaction 3:

(2 ×220 J) - 205 + (2× 191.5 J)]  = - 148 J/K

Therefore, the entropy change of the given reactions can be determined in this way. For all these reactions, the entropy is decreasing.

Find more on entropy change:

https://brainly.com/question/4526346

#SPJ1

Find the number of moles in each reactant in the formula CO + 2 H2 CH3OH.

= 174371 g = 174.4 kg.

To Learn more About number of moles refer To:

https://brainly.com/question/14357742

#SPJ1

A balanced chemical equation describes a reaction where the number of each type of atom on one side of the equation is equal to the number of the same sort of atoms on the other side of the equation.

In other words, the number of atoms of each element is the same on both sides of the equation, obeying the rule of conservation of mass.

For instance, the balanced formula for the combustion of oxygen and methane is CH4 + 2 O2 -> CO2 + 2 H2O.

On either side of the equation, there are 1 carbon atom, 4 hydrogen atoms, and 4 oxygen atoms.

The chemical equation must be in balance in order to employ the right quantity of reactants and products and to forecast how much reactant will be used and how much product will be produced.

learn more about atoms here:

https://brainly.com/question/1566330

#SPJ4

The molarity of the solution prepared by mixing 25.0 mL of 0.375 M NaCl with 42.0 mL of a 0.632 M NaCl is 0.536 M

We'll begin by obtaining the mole of NaCl in both solutions. Details below:

For 0.375 M NaCl:

Molarity = number of mole / Volume

Cross multiply

Number of mole = molarity × volume

Number of mole of NaCl = 0.375 × 0.025

Number of mole of NaCl = 0.009375 mole

For 0.632 M NaCl:

Molarity = number of mole / Volume

Cross multiply

Number of mole = molarity × volume

Number of mole of NaCl = 0.632 × 0.042

Number of mole of NaCl = 0.026544 mole

Finally, we shall determine the molarity of the solution. Details below:

Molarity = mole / volume

Molarity = 0.035919 / 0.067

Molarity = 0.536 M

Thus, the molarity of the solution is 0.536 M

Learn more about molarity:

https://brainly.com/question/16073358

#SPJ1

Answer:

2NaOH + CO2 -----> Na2CO3 + H2O

Explanation:

Carbon dioxide is acid anhydride, so reacts like and acid with Sodium hydroxide is neutralisation reaction to form salt and water

A gas consisting of 25. 6 moles of carbon fills a volume of 128 L and has a pressure of 135 kPa. The temperature of the gas is -270.58°C.

The temperature of a gas can be found using the Ideal Gas Law, which states that PV = nRT. The Ideal Gas Law relates the pressure, volume, and temperature of a gas to the number of moles of the gas present.

In this case, we are given the number of moles of the gas (n = 25.6 moles), the volume of the gas (V = 128 L), and the pressure of the gas (P = 135 kPa). We can use these values to find the temperature of the gas in degrees Celsius.

First, we need to convert the pressure from kPa to Pa. To do this, we multiply the pressure in kPa by 1000:

P = 135 kPa x 1000 Pa/kPa = 135 000 Pa

We can now substitute this value into the Ideal Gas Law:

PV = nRT

T = (nRT)/P

T = (25.6 mol * 8.314 J/mol.K) / (135 000 Pa)

T = 2.57 K

To convert from Kelvin to Celsius, we subtract 273.15 from the temperature in Kelvin:

T(°C) = T(K) - 273.15

T(°C) = 2.57 K - 273.15 = -270.58°C

So the temperature of the gas is -270.58°C

Please note that this is an ideal gas equation and it will not work for real gases. Also, the temperature is extremely low, it's unlikely that the gas can exist at that temperature.

To know more about gas please refer: https://brainly.com/question/13123721

#SPJ4