How many grams of Na are needed to react with
H₂O to liberate 4.00 x 102 mL of H₂ gas at STP?

The Galvanic Series is a list of metals and alloys arranged in order of their relative nobility or reactivity in seawater or other electrolytic solutions. The most noble metals are at the top of the series and the most active or least noble are at the bottom.

The general, noble metals like gold, platinum, and silver are highly resistant to corrosion and oxidation, while less noble metals like iron and zinc are more reactive and prone to corrosion. the Galvanic Series, the most noble metal is actually not one of the options listed in the question. The top three most noble metals are platinum, gold, and palladium, followed by silver, titanium, and copper. Zinc, steel, magnesium, and carbon are all less noble and more reactive than these metals. Therefore, the correct answer to the question would be "none of the above." It is important to note that the relative nobility of metals can vary depending on the specific environment and conditions, and other factors such as the presence of other metals and the pH level of the solution can also affect their reactivity.

learn more about electrolytic here.

https://brainly.com/question/29771118

#SPJ11

The half life of a radioactive material is inversely proportional to the decay constant and it is completely independent of the amount of it present initially. Here the number of atoms which remain after the decay of radioactive material is

The half-life period of a radionuclide is the time required for the decay of the one half of the amount of the species. The half life period is a characteristic of a radionuclide. The half-lives of different radionuclides vary from fractions of seconds to billions of years.

The amount remaining after 3 half-lives can be obtained as:

N = N₀ / 2ⁿ

N = 800000 / 2³

N = 800000 / 8

N = 100,000

To know more about half-lives, visit;

https://brainly.com/question/27755919

#SPJ1

By adding sodium sulphite to the conical flask, you can ensure the stability and preservation of the formed crystals.

Sodium sulphite is added to the conical flask once crystals are formed to stabilize and preserve the newly formed crystals. Here's a step-by-step explanation:
1. Crystals are formed in a conical flask through a chemical reaction or by evaporating a solution.
2. After the crystals have formed, sodium sulphite is added to the conical flask.
3. Sodium sulphite acts as a stabilizer and preservative, preventing the crystals from reacting with other substances in the solution or with atmospheric oxygen.
4. This stabilization helps maintain the quality and integrity of the crystals, ensuring they remain in their desired state for further analysis or use.

To learn more about  sodium sulphite click here https://brainly.com/question/11855511

#SPJ11

A)The order of increasing electronegativity is: N < P < As < Sb < H.  the order of increasing electronegativity is: H < Si < P < S < Cl , B) the order of increasing electronegativity is: H < Ge < Sr < Cl < Br , C) the order of increasing electronegativity is: H < Si < N < K < Ca. D)the order of increasing electronegativity is: H < Ge < Sr < Cl < Cs.

(a) From left to right across the periodic table, electronegativity generally increases. Among the given elements, nitrogen (N) has the lowest electronegativity, followed by phosphorus (P), arsenic (As), antimony (Sb), and hydrogen (H), which has the highest electronegativity. Therefore, the order of increasing electronegativity is: N < P < As < Sb < H.

(b) Similarly, among the given elements, hydrogen (H) has the lowest electronegativity, followed by silicon (Si), phosphorus (P), sulfur (S), and chlorine (Cl), which has the highest electronegativity. Therefore, the order of increasing electronegativity is: H < Si < P < S < Cl.

(c) In this series, hydrogen (H) has the lowest electronegativity, followed by germanium (Ge), strontium (Sr), chlorine (Cl), and bromine (Br), which has the highest electronegativity. Therefore, the order of increasing electronegativity is: H < Ge < Sr < Cl < Br.

(d) Among the given elements, hydrogen (H) has the lowest electronegativity, followed by silicon (Si), nitrogen (N), potassium (K), and calcium (Ca), which has the highest electronegativity. Therefore, the order of increasing electronegativity is: H < Si < N < K < Ca.

(e) Finally, among the given elements, hydrogen (H) has the lowest electronegativity, followed by germanium (Ge), strontium (Sr), chlorine (Cl), and cesium (Cs), which has the highest electronegativity. Therefore, the order of increasing electronegativity is: H < Ge < Sr < Cl < Cs.

Learn more about electronegativity ,

https://brainly.com/question/17762711

#SPJ4

Answer:

a. The given molecular formula of the akene is C22H40. When it undergoes ozonolysis, it gives two products with the same molecular formula C22H40, which are functional isomers of each other. These two isomers are 1-octene and 9-octene.

The two-step chemical equation for the conversion of the akene into 1-octene and 9-octene is as follows:

Step 1: Ozonolysis of the akene to form ozonides

C22H40 + 3O3 → C22H40O3 + 3O2

Step 2: Reduction of the ozonides to form 1-octene and 9-octene

C22H40O3 + 6H2O → 3C8H16 + 3C8H18O

b. The structural formula of the two isomers 1-octene and 9-octene are as follows:

1-octene: CH3(CH2)6CH=CH2

9-octene: CH3(CH2)4CH=CH(CH2)2CH3

They are called functional isomers because they have the same molecular formula but different functional groups. In this case, both isomers have an alkene functional group, but they differ in the position of the double bond.

c. When hydrogen gas in the presence of a nickel catalyst is passed over X, it undergoes hydrogenation to form a saturated compound Y. The chemical equation for the reaction is as follows:

X + H2 → Y

d. One way to prove that the compound X is unsaturated is by performing the bromine water test. Bromine water is a reddish-brown solution of bromine in water. When added to an unsaturated compound, it undergoes decolorization due to the addition of bromine across the double bond. If X is unsaturated, then it will decolorize bromine water, indicating the presence of a double bond.

Propanedioic acid ((CH₃)₂C(O)COOH), oxalic acid (HO₂C-C(O)OH), and formic acid (HCOOH) are among the carboxylic acids created after the ozonolysis of ccccCH₃CH₂COOH.

In an organic redox reaction known as ozonolysis, ozone is used to break unsaturated carbon-carbon bonds (double or triple bonds) in alkenes, alkynes, or azo compounds.

The molecule with the SMILES string ccccCH₃CH₂COOH can undergo ozonolysis to form a mixture of products. The ozonolysis reaction involves the cleavage of the carbon-carbon double bond by ozone (O₃) to form ozonide intermediates, which can then react further to form various products.

The ozonolysis of ccccCH₃CH₂COOH would result in the formation of several carboxylic acid products, including propanedioic acid ((CH₃)₂C(O)COOH), oxalic acid (HO₂C-C(O)OH), and formic acid (HCOOH). The exact ratio and amounts of these products depend on the specific conditions of the reaction, such as the concentration of ozone, temperature, and presence of any catalysts.

Therefore, the carboxylic acids produced in the ozonolysis of ccccCH₃CH₂COOH include propanedioic acid ((CH₃)₂C(O)COOH), oxalic acid (HO₂C-C(O)OH), and formic acid (HCOOH).

Learn more about ozonolysis on:

https://brainly.com/question/24113517

#SPJ11

The slow carbon cycle involves processes that take place over geological timescales, including the transfer of carbon between the atmosphere, oceans, rocks, and soils. The total amount of carbon in each of these reservoirs can change over time due to various factors, such as natural and human-induced processes.

One part of the slow carbon cycle in which the total amount of carbon is most likely decreasing the most is the process of sedimentation of organic matter in ocean sediments. This occurs because the organic matter that sinks to the seafloor is buried and undergoes diagenesis, a process by which it is transformed into more stable forms of carbon, such as kerogen or graphite. The decrease in carbon occurs because the rate of sedimentation of organic matter is faster than the rate of carbon input from sources such as volcanoes, weathering of rocks, and human activities.

Learn more about the carbon cycle here.

https://brainly.com/question/30633292

#SPJ1

The amount of energy absorbed by 2.00 L of gasoline as it is converted to the vapor phase at its boiling point is 38,550 J

Using the following formula:

q = m x ΔHvap

Volume= 2.00 L = 2000 mL

density of gasoline = 0.75 g/mL

mass = volume x density = 2000 mL x 0.75 g/mL = 1500 g

The enthalpy of vaporization of gasoline= 42.0 kJ/mol = 25.7 J/g

q = m x ΔHvap = 1500g x 25.7 J/g = 38,550 J

Learn more about energy on

https://brainly.com/question/13881533

#SPJ1

Carbon diffusion in FCC iron occurs through interstitial diffusion along the <111> crystallographic directions. This is a significant process in steel production that affects material strength and other mechanical properties. Knowledge of crystallographic directions is crucial in controlling material properties.

For more such question on crystallography

https://brainly.com/question/28301570

#SPJ11

The value of q is 66.4 kJ.

The given chemical equation is:

[tex]\mathrm{N_2(g) + 2O_2(g) \rightarrow 2NO_2(g)} \qquad \Delta H = +66.4 \text{ kJ/mol}[/tex] = 66.4 kJ/mol

Since the enthalpy change (ΔH) is positive, it means that heat is absorbed during the reaction, indicating that this reaction is endothermic.

The amount of heat absorbed (q) can be calculated using the following formula:

q = nΔH

where n is the number of moles of reactant that undergo the reaction.

For this reaction, 1 mole of [tex]\mathrm{N_2}[/tex]reacts, so n = 1.

Therefore, the amount of heat absorbed is:

q = (1 mol) × (66.4 kJ/mol) = 66.4 kJ

So, the value of q is 66.4 kJ.

Learn more about heat absorbed

https://brainly.com/question/30836915

#SPJ4

The ideal gas law can be used to determine how many moles of oxygen are present in the reaction vessel. PV = nRT, where P is pressure, V is volume, n is moles, R is gas constant, and T is temperature, is the formula for the ideal gas law.

We obtain 53.3 atm*0.178 L = n*0.0821 L*atm/mol*292.1K by plugging in the specified variables. We arrive at n = 0.0087 moles of oxygen after solving for n.

Therefore, at the specified pressure and temperature, the reaction vessel contains 0.0087 moles of oxygen.

Learn more about  oxygen  at:

https://brainly.com/question/13370320

#SPJ1

The graph of the function y = 2x + 3 is attached. See below for the characteristics of the Linear function.

The function provided exhibits qualities of a linear function, having a domain and range that encompass all real numbers.

Its slope or rate of change has a value of 2, while the intercepts are 3 for the y-axis and (-1.5,0) for the x-axis.

The absence of an axis of symmetry or vertex is indicative that this is not a quadratic function. Projectile motion is a practical example of a quadratic function.

Exponential functions, on the other hand, exhibit growth at a certain rate and are defined for all real numbers, with their range being positive real numbers. By studying exponential functions, one may observe exponential decay or growth as portrayed in the table.

Compound interest is an excellent real-world application of this kind of function.

Linear functions help model relations between two variables, quadratic functions can map parabolic forms, while exponential functions account for various growth/decay patterns.

Learn more about Functions:
https://brainly.com/question/12431044
#SPJ1

Ionic bonds typically produce a crystal matrix. In contrast, covalent bonds are formed between two individual atoms, giving rise to true, discrete molecules.

When two or more atoms share electron pairs, covalent bonds are formed. Depending on how many electron pairs are shared, covalent bonds can be single, double, or triple.

Depending on the difference in electronegativity between the two atoms, covalent bonds can either be polar or nonpolar. Partially charged atoms result from the unequal distribution of electrons in a polar covalent bond. There are no partial charges because the electrons in a nonpolar covalent bond are distributed uniformly.

Because the atoms involved are sharing electrons rather than totally transferring them, covalent connections are typically stronger than ionic ones overall.

For such more question on covalent:

https://brainly.com/question/3447218

#SPJ11

The best reagents to convert 1-hexyne into (e)-1,2-dibromo-1-hexene are 1 equiv. Br2 in CCl4, followed by NaOH to convert the mixture of (Z)- and (E)-isomers to the desired (E)-isomer.

This reaction is called the Vicinal Dibromination reaction. Option A: xs Br2 in CCl4 is a good choice of reagents, but it will give a mixture of (Z)- and (E)-isomers. Option B: 1 equiv. HBr will result in the formation of (Z)-1-bromo-1-hexene. Option C: ROOR is a radical initiator and will not result in the desired product.

To know more about different reagents and  isomers : https://brainly.com/question/29713522

#SPJ11

The small repeating units used to synthesize polymers are called monomers. These monomers are joined together through a chemical reaction known as polymerization, which results in the formation of long chains of polymers.

The properties of these polymers, such as their strength and flexibility, depend on the specific monomers used and the conditions under which the polymerization occurs. By varying the monomers used, scientists can create a wide range of polymers with different properties that are used in a variety of applications, from plastics and textiles to pharmaceuticals and medical devices.

In polymer synthesis, monomers are chemically bonded to form long chains called polymers. The process, called polymerization, involves the joining of many monomers together. Polymers can be natural, like DNA and cellulose, or synthetic, like plastics and rubber.

The properties of a polymer depend on the type of monomer(s) used and the structure of the polymer chains. Monomers can vary greatly in size and functionality, leading to a wide range of polymers with diverse characteristics and applications.

To know more about polymers visit:

https://brainly.com/question/17354715

#SPJ11

The correct answer would be C) I and III only, as both carbon and carbon monoxide could be formed during the incomplete combustion of a hydrocarbon.

During incomplete combustion of a hydrocarbon, not all of the carbon and hydrogen atoms combine with oxygen to form carbon dioxide and water. This results in the formation of various other substances, such as carbon monoxide, soot, and other carbon-containing particles. Out of the given options, both carbon and carbon monoxide could be formed during incomplete combustion. Carbon is formed when there is insufficient oxygen to convert all of the carbon in the hydrocarbon into carbon dioxide. Carbon monoxide, on the other hand, is formed when there is not enough oxygen to complete the combustion of the hydrocarbon, but still enough to oxidize some of the carbon and hydrogen. Carbon monoxide is a toxic gas that can be harmful to human health and the environment. During the incomplete combustion of a hydrocarbon, the substances that could be formed are Carbon (I) and Carbon monoxide (III). Incomplete combustion occurs when there is insufficient oxygen supply, resulting in the production of these two substances, along with water. Carbon appears as soot or particulate matter, while Carbon monoxide is a toxic, colorless, and odorless gas. Hydrogen (II) is not formed during the combustion process, as it is already a component of the hydrocarbon itself.

Learn more about hydrocarbon here

https://brainly.com/question/11964417

#SPJ11

The molecules/ions that are likely to be planar are those that have a central atom with either three or four bonded atoms and no lone pairs. Based on this criteria,the likely planar molecules/ions are I and IV, so the answer is A) I and IV.

I. PCl3 - This molecule has a central phosphorus atom bonded to three chlorine atoms. It is likely to be planar.

II. BF4- - This ion has a central boron atom bonded to four fluorine atoms. It is likely to be planar.

III. XeF4 - This molecule has a central xenon atom bonded to four fluorine atoms. It has two lone pairs of electrons, which will cause it to adopt a square planar geometry rather than a flat plane.

IV. BrF3 - This molecule has a central bromine atom bonded to three fluorine atoms. It has two lone pairs of electrons, which will cause it to adopt a T-shaped geometry rather than a flat plane.

V. BrF5 - This molecule has a central bromine atom bonded to five fluorine atoms. It has one lone pair of electrons, which will cause it to adopt a square pyramidal geometry rather than a flat plane.

VI. H3O+ - This ion has a central oxygen atom bonded to three hydrogen atoms. It has one lone pair of electrons, which will cause it to adopt a trigonal pyramidal geometry rather than a flat plane.

Based on this analysis, the likely planar molecules/ions are I and IV, so the answer is A) I and IV.

For more questions on planar structure : https://brainly.com/question/15346125

#SPJ11

[tex]LiNO_{3}[/tex]There are 0.075 moles of [tex]LiNO_{3}[/tex] in 250 mL of a 0.30 M solution.

To determine the number of moles of [tex]LiNO_{3}[/tex] in 250 mL of a 0.30 M solution, we can use the formula:

moles of solute = concentration (M) x volume (L)

First, we need to convert the volume from milliliters (mL) to liters (L):

250 mL = 0.25 L

Next, we can substitute the given values into the formula:

moles of [tex]LiNO_{3}[/tex] = 0.30 M x 0.25 L

moles of [tex]LiNO_{3}[/tex] = 0.075 mol

Therefore, there are 0.075 moles of [tex]LiNO_{3}[/tex] in 250 mL of a 0.30 M solution.

Learn more about moles, here:

https://brainly.com/question/15209553

#SPJ1

The chemical formula for citric acid is C₆H₈O₇. Citric acid is a weak acid.

Sentence: Citric acid has a chemical formula of C₆H₈O₇ and is classified as a weak acid.

Citric acid is a weak organic acid, with a molecular formula of C₆H₈O₇. It is found naturally in citrus fruits and many other fruits and vegetables, and is commonly used as a food additive and flavoring agent.

Citric acid is classified as a weak acid because it does not completely dissociate in aqueous solution. When citric acid dissolves in water, some of the molecules donate a proton (H⁺) to water molecules to form hydronium ions (H₃O⁺), while others remain as undissociated molecules. The equilibrium between the undissociated molecules and the hydronium ions can be described by the following equation:

C₆H₈O₇ + H₂O ⇌ C₆H₇O₇⁻ + H₃O⁺

In this equation, C₆H₈O₇ represents undissociated citric acid, C₆H₇O₇⁻ represents the citrate ion, and H₃O⁺ represents hydronium ions.

The dissociation of citric acid is incomplete, meaning that only a fraction of the citric acid molecules dissociate in aqueous solution. The strength of an acid is related to the extent of dissociation, so weak acids like citric acid have a relatively small dissociation constant (Ka) compared to strong acids.

The Ka for citric acid is approximately 8.4 × 10⁻⁴ at 25°C, indicating that only a small fraction of the citric acid molecules dissociate in aqueous solution. This is why citric acid is classified as a weak acid.

To know more about the citric acid refer here :

https://brainly.com/question/29857075#

#SPJ11

Answer:

Algebra is the study of variables and the rules for manipulating these variables in formulas; it is a unifying thread of almost all of mathematics. Elementary algebra deals with the manipulation of variables as if they were numbers and is therefore essential in all applications of mathematics.

What is algebra used for?

Algebra teaches you to follow a logical path to solve a problem. This, in turn, allows you to have a better understanding of how numbers function and work together in an equation. By having a better understanding of numbers, you'll be better able to do any type of math.

Hope this helps :)

Pls brainliest...

The correct code for controlling external corrosion on underground or submerged metallic piping systems is RP0285. Corrosion is a natural process that occurs when metal is exposed to the environment.

It can weaken the structural integrity of metallic piping systems and lead to leaks and failures. Therefore, it is important to implement proper corrosion control measures to prevent or mitigate this issue. RP0285 provides guidelines for designing, installing, and maintaining corrosion control systems for metallic piping systems that are underground or submerged. This code covers a wide range of topics such as cathodic protection, coatings, and corrosion monitoring. By following RP0285, operators can ensure the safe and reliable operation of their metallic piping systems, reducing the risk of leaks and failures caused by corrosion.

learn more about corrosion Refer: https://brainly.com/question/28302789

#SPJ11

Between the same two atoms, the strongest covalent bond is the triple bond and the weakest is the single bond.

A single bond is formed when two atoms share one pair of electrons. This type of bond is the most stable and secure of all covalent bonds as the shared electrons are firmly held in place by the two atoms. The weakest covalent bond between two atoms is a triple bond. A triple bond is formed when two atoms share three pairs of electrons. This type of bond is less stable than a single bond as the three shared electrons are more loosely held and may be more easily lost or broken.

To learn more about covalent bond click here https://brainly.com/question/10777799

#SPJ11

The cell potential of the voltaic cell is 0.8129 V.

The cell potential of a voltaic cell can be calculated using the Nernst equation:

Ecell = E°cell - (RT/nF) ln(Q)

where E°cell is the standard cell potential, R is the gas constant (8.314 J/mol K), T is the temperature in Kelvin, n is the number of electrons transferred in the cell reaction, F is the Faraday constant (96485 C/mol), and Q is the reaction quotient.

The balanced cell reaction for the[tex]$\mathrm{Mn/Mn^{2+}}$[/tex] [tex]$\mathrm{Cd^{2+}}$[/tex] half-cells can be written as follows:

[tex]\mathrm{Mn^{2+}}$.[/tex]+ + 2e- → Mn (E° = -1.18 V)

[tex]$\mathrm{Cd^{2+}}$[/tex]+ + 2e- → Cd (E° = -0.40 V)

To calculate E°cell, we need to subtract the reduction potential of the anode from the reduction potential of the cathode:

E°cell = E°cathode - E°anode

E°cell = E°Cd - E°Mn

E°cell = (-0.40 V) - (-1.18 V)

E°cell = 0.78 V

Next, we need to calculate the reaction quotient, Q, using the concentrations of the reactants and products:

Q = [[tex]$\mathrm{Cd^{2+}}$[/tex]]/[[tex]$\mathrm{Mn^{2+}}$.[/tex]]

Q = 0.00423 M / 0.28 M

Q = 0.0151

Finally, we can plug in the values into the Nernst equation to calculate the cell potential:

Ecell = E°cell - (RT/nF) ln(Q)

Ecell = 0.78 V - (8.314 J/mol K)(298 K)/(2 mol e-)(96485 C/mol) ln(0.0151)

Ecell = 0.78 V - (-0.0329 V)

Ecell = 0.8129 V

Therefore, the cell potential of the voltaic cell is 0.8129 V.

Learn more about voltaic cell

https://brainly.com/question/1370699

#SPJ4

The energy of the n = 1 level of the hydrogen (H) atom can be calculated using mathematical formulas that involve the speed of light and Planck's constant. This energy level is also known as the ground state of the atom, which is the lowest energy level that an electron can occupy.

The energy of this level is crucial for understanding the behavior of electrons within the atom and for studying atomic structure.

To be more specific, the energy of the n = 1 level of the H atom can be calculated using the Rydberg formula, which involves the Rydberg constant, the speed of light, and Planck's constant. This formula is based on the concept of atomic spectra, which refers to the light emitted or absorbed by an atom due to the energy changes of its electrons. By analyzing the spectral lines of hydrogen, scientists have been able to determine the energy levels of its electrons, including the ground state.

Additionally, the energy of the n = 1 level of the H atom is also related to the ionization energy, which is the energy required to remove an electron from the atom completely. This ionization energy is equal to the energy of the ground state of the H atom, as it takes exactly this amount of energy to remove an electron from the lowest energy level.

In conclusion, the energy of the n = 1 level of the H atom is a fundamental concept in atomic physics, and can be calculated using mathematical formulas based on the speed of light and Planck's constant. It is also related to the ionization energy and has been determined through spectral analysis of the atom. The idea of aliens telling Bohr the answer is purely fictional and has no scientific basis.

learn more about Planck's constant here: brainly.com/question/27389304

#SPJ11

The compound that is a tertiary halogenoalkane is D. CH3CH2C(CH3)2Br, since it has a tertiary carbon (bonded to three other carbon atoms).

A halogen atom (Br, Cl, I, or F) is joined to a carbon atom that is connected to three more carbon atoms to form a tertiary halogenoalkane. Option D creates a tertiary halogenoalkane by bonding the Br-attached carbon atom to three additional carbon atoms. The Br-attached carbon is connected to two other carbon atoms, making Option A a secondary halogenoalkane. Because the carbon atom with the Br attached is only connected to one other carbon atom, option B is a primary halogenoalkane. Because the Br-attached carbon is connected to two additional carbon atoms, option C also qualifies as a secondary halogenoalkane.

learn more about halogenoalkane here:

https://brainly.com/question/30477930

#SPJ11

When the volume of a system involving gaseous substances is decreased, the pressure within the system increases.

This is due to the fact that the molecules of the gas are being forced into a smaller space, causing them to collide more frequently with each other and the walls of the container. As a result, the concentration of the reactants in the system increases, leading to a shift in the equilibrium position.

According to Le Chatelier's Principle, when a system at equilibrium is subjected to a stress (such as a change in pressure, temperature, or concentration), it will respond by shifting in a direction that counteracts the stress. In the case of a decrease in volume, the system will respond by shifting in the direction that produces fewer moles of gas.

For example, consider the equilibrium reaction between nitrogen dioxide and dinitrogen tetroxide:

2NO₂(g) ⇌ N₂O₄(g)

If the volume of the system is decreased by compressing the container, the pressure within the container will increase, causing the equilibrium to shift to the right in order to reduce the number of gas molecules. This will result in an increase in the concentration of N₂O₄ and a decrease in the concentration of NO₂.

Overall, the effect of decreasing the volume of a system involving gaseous substances is to increase the pressure within the system and shift the equilibrium position in a direction that produces fewer moles of gas.

To know more about gaseous system, refer to the link below:

https://brainly.com/question/13149775#

#SPJ11

The true statement of a molecule of gaseous hydrogen is It has no net charge. Therefore the correct option is option A.

A covalently bound pair of hydrogen atoms make up a gaseous hydrogen molecule (H2), which is a substance. This indicates that in order to create a stable molecule, the two hydrogen atoms share an electron.

H2 is the lightest and most prevalent element in the universe and is a diatomic gas at room temperature and atmospheric pressure. It has no colour, no smell, and is non-toxic.

Highly flammable H2 gas can be used as fuel for a variety of devices, including fuel cells, IC engines, and rockets. Another way to create H2 gas is through the electrolysis of water, reforming of natural gas, or gasification of coal. Therefore the correct option is option A.

For such more question on molecule:

https://brainly.com/question/30375112

#SPJ11

The following question may be like this:

What is true of a molecule of gaseous hydrogen (H2)? Multiple choice question.

The loss of one electron and ionic bond gives the ammonium ion ([tex]NH_4^{+}[/tex]) a positive charge, whereas the gain of one electron gives the chloride ion [tex](cl^{-} )[/tex] a negative charge. The two ions can form an ionic connection because their opposing charges are attracted to one another.

Positively charged cations and negatively charged anions are created when one or more electrons are transferred from one atom to another to form an ionic connection. A crystal lattice structure is subsequently created as a result of the cations and anions' mutual attraction.

The nitrogen atom in  ([tex]NH_4^{+}[/tex]) contributes a lone pair of electrons to a hydrogen atom in the case of  ([tex]NH_4^{+}[/tex]) and  [tex](cl^{-} )[/tex], resulting in the production of a positively charged ammonium ion. In contrast, the chloride ion advances.

Learn more about ionic bond visit: brainly.com/question/13526463

#SPJ4

Here is the ranking of bonds and interactions in a living cell from strongest to weakest: Covalent bonds, Ionic bonds, Hydrogen bonds, Van der Waals interactions.

The strongest to weakest links and interactions in a live cell are listed below:

For such more question on Ionic bonds:

https://brainly.com/question/977324

#SPJ11

The following question may be like this:

What is the order of bonds and interactions from the strongest to the weakest?

(Covalent, Van der Waals interaction, ionic bond, hydrogen bond)

Lauryl alcohol is a nonelectrolyte obtained from coconut oil and is used to make detergents. A solution of 6. 40 g of lauryl alcohol in 0. 200 kg of benzene freezes at 4. 6 ∘C. 183 (g/mol) is the molar mass of lauryl alcohol.

The molar mass of something specific divided by the amount present in the sample gives the molecular weight of a compound. It is a substance's bulk attribute rather than a molecular one. The compound's molar mass represents the average of all of its occurrences.

Which, as a result of the existence of isotopes, commonly change in mass. Most frequently, molar mass is calculated using quality atomic weights, which is a terrestrial average therefore a function of the proportion of each of the constituent atoms' isotopes on earth.

Tb - Ts = Kml\Mms

M =6. 40×5\0.1(5.5-4.6) = 183 (g/mol)

To know more about molar mass, here:

https://brainly.com/question/22997914

#SPJ1