HELP PLZZZZZZ
A 30 g spoon is lifted above a table and has 0.062 J of potential energy. How high is it?

Answer:

(B) B is travelling fastest

Explanation:

slope of xt graph = speed.

Slope of B is greater than a and c.

BRAINLIST PLS

There are many reasons actually...

◇ Clayey soil is easy to mould than the other soils.

The other soils (like sandy soil & loamy soil) are grainy or dry in nature & cannot be moulded. In the ancient times, when technology & the know-hows were still not introduced, people used clayey soul to make earthern pots to store stuff. This practice still continues even today.

◇ It keeps water cool.

Ever wondered why water stored in the earthenware remains cool even on a sunny day? It's because the heat required for evaporation is taken from water inside the pot & thus it cools the water stored inside.

◇ Clayey soil is also moist, durable, more plastic like & easy to retain making it ideal for potters to make earthenware.

__________

Clay soil is used to make earthenwares because, clay can be easily molded to desired sizes and shapes. Clay absorbs water moiety and make the pot very cool inside.

Clay is a type of soil made by the sedimentation process near water resources.  They are rich in minerals. Clay is rich in silicates and intermolecular force in the soil is comparatively less and can be easily molded any shape and size.

When clay is fired to a high enough temperature, the glass-forming materials in the ceramic form a liquid glass. This glass bridges the gaps between the clay particles. As the pottery cools at the end of the firing process, the glass between the clay particles solidifies again.

Clay pots make the water cooler inside. Hence, clay is used to make earthen wares.

To find more on clay, refer here:

https://brainly.com/question/29606959

#SPJ2

Answer:

C

Explanation:

The correct answer is C because it puts equivalent measurements in the equivalent cup size. Both cups in answer C are the same measurement: 200 mL. The water in both cups is also the same measurement: 100 mL of 70 degrees Celsius. This is important because equivalent measurements for everything mean the experiment will be fair, equal, and accurate. If the measurements were not equal to each other, your experiment would not be as accurate.

Answer:

cuz model clay float

Explanation:

yeah

Based on the information that is depicted from the question, the data from Najah showed that most managers focus on consideration and inspiration.

The behavioral leadership theory simply focuses on how leaders behave. The theory also assumes that other leaders copy each other's traits.

Based on the complete information, the data illustrated that most managers focus on consideration and inspiration. Managers inspire their subordinates in order to accomplish a goal.

Read related link on:

https://brainly.com/question/25640662

Answer:

d. pulling a 10kg box on the floor using a rope

Answer:

Speed can be defined in (C) distance / time.

I hope this helped at all.

Hi there!

[tex]\boxed{\text{Her angular velocity decreases.}}[/tex]

Recall the conservation of angular momentum:

[tex]L_i = L_f\\\\I_iw_i = I_fw_f[/tex]

When this person extends her arms, her moment of inertia increases.

According to the conservation of angular momentum, if the moment of inertia increases, the angular velocity must DECREASE.

Answer:

Mechanical energy is the energy a substance or system has because of its motion. For example machines use mechanical energy to do work.

Answer:

C

Explanation:

Fusion and fission are similar in that they both release large amounts of energy. Nuclear fusion is a process in which two nuclei join to form a larger nucleus. Nuclear fission is a process in which a nucleus splits into two smaller nuclei.

Answer:

at 2.5m

Explanation:

because 2.5m*4m is 10.0=10

To solve this, we must know each and every concept related to speed of efflux and its calculations. Therefore,  hole at 3m will have the greatest speed of efflux.

The velocity of outflow is the speed with which a liquid emerges from a hole cut at a certain height from bottom of the container within which the liquid is contained.

Mathematically, the formula for speed of efflux can be given as

speed of efflux =√2×g×h

g= acceleration due to gravity

h1=4- 1 =3m

h2=4-2=2m

h3=4-2.5=1.5m

h4=4-1.5=2.5

Since speed of efflux is directly proportional to height. More the vale of h more will be speed of efflux. So on calculations, hole at 3m will have the greatest speed of efflux.

Therefore,  hole at 3m will have the greatest speed of efflux.

To know more about  speed of efflux, here:

https://brainly.com/question/17087482

#SPJ2

The empirical formula of the compound is Li₂CO₃

First, we will determine the respective number of moles of each element present in the compound by dividing by their atomic masses

Lithium                      Carbon                          Oxygen

6.25÷6.94                 5.40÷12.01                    21.60÷16.00

0.9006                      0.4496                          1.35

Now, divide through by the smallest number of moles, that is, 0.4496

Lithium                      Carbon                          Oxygen

0.9006÷0.4496        0.4496÷0.4496            1.35÷0.4496

2                                      1                                    3

Hence, the empirical formula of the compound is Li₂CO₃

Learn more here: https://brainly.com/question/25661375

The definition of power is operating electrically or having strength or force. An example of power is the functioning of a gasoline-driven saw or tool. Or Power is related to other quantities; for example, the power involved in moving a ground vehicle is the product of the traction force on the wheels and the velocity of the vehicle. The output power of a motor is the product of the torque that the motor generates and the angular velocity of its output shaft. Likewise, the power dissipated in an electrical element of a circuit is the product of the current flowing through the element and of the voltage across the element.

The vertical height of the cliff on which the diver drove off is 33.76 m.

The given parameters;

The time of motion of the cliff diver is calculated as follows;

[tex]t = \frac{X}{v} \\\\t = \frac{21}{8} \\\\t = 2.625 \ s[/tex]

The vertical height of the cliff is calculated as follows;

[tex]h = v_0_y t + \frac{1}{2} gt^2\\\\h = 0 + 0.5 \times 9.8 \times 2.625^2\\\\h = 33.76 \ m[/tex]

Thus, the vertical height of the cliff on which the diver drove off is 33.76 m.

Learn more here:https://brainly.com/question/19261726

Answer:

Gamma-rays are produced primarily by four different nuclear reactions; fusion, fission, alpha decay and gamma decay.

The type of process that can emit gamma - rays is nuclear reaction processes.

A nuclear reaction is a type of reaction in which two nuclei collide to produce one or more new nuclides and release energy in the process.

Examples of nuclear reactions;

Each of the nuclear reaction above can emit gamma - rays.

Thus, the type of process that can emit gamma - rays is nuclear reaction processes.

Learn more about nuclear reaction here: https://brainly.com/question/25387647

Answer:

1.D 2.A 3.A 4.B 5.C 6.A 7.A 8.A

Explanation:

Answer:

Question one is: kinetic energy

Question two is: tin

Question three is: zinc

Question four is: compression stroke

Question five is: second law of thermodynamics

Question six is: Convection

Question seven is: refrigerater

Explanation:

The next page called use vocabulary

the answers:

Question twenty three is: Heat engine

Question twenty four is: Thermodynamics

Question twenty five is: solar collector

Question twenty six is: specific heat capacity

Question twenty seven is: a conductor

Question twenty eight is: it's total energy increasing

Question thrity is: internal combustion engine

Question thrity one is: Exhaust stroke

Question thrity two is: plastic

Question thrity three: I don't know this one sorry!

Question thrity four is: Temperature

Question thrity five is: Heat

Hope his helps!!! <3

Answer: When a gas is in a smaller volume, the molecules are more confined and bump into the walls of the flask more, thereby exerting a greater pressure.

Explanation:

The formation and operation of prisons, as well as inmates' rights, are governed by federal and state regulations. Although prisoners may not have full constitutional rights, the Eighth Amendment's restriction on cruel and unusual punishment protects them.

Answer: earthquakes and volcanoes

Explanation:

Answer:

3.09594

Explanation:

hope this helps

Answer:

C

Explanation:

The attractive force of their magnetic fields is greatest at the poles. Option B is correct.

Earth's magnetic field is similar to that of a bar magnet in that both have north and south poles. The magnetic field lines of both Earth and a bar magnet originate from the north pole and loop around to the south pole. The magnetic field lines are most concentrated and the attractive force is strongest near the poles of both Earth and a bar magnet.

At the poles, the magnetic field lines are densely packed and closely spaced, leading to a stronger magnetic force. This is why compass needles, which align with Earth's magnetic field, point towards the magnetic north pole.

The statement about electric current causing them to lose magnetism (option D) is not accurate. Electric current can actually create magnetic fields, as seen in electromagnets. Earth's magnetic field is generated by the movement of molten iron in its outer core, not by electric currents in the conventional sense.

In summary, option B is the correct answer as it accurately reflects the similarity in the distribution of magnetic field lines and the strength of the attractive force near the poles for both Earth and a bar magnet.

To learn more about magnetic field, here

https://brainly.com/question/14848188

#SPJ3

Answer:

6.5

Explanation:

Because 1.5+5=6.5

Answer:

Refer to the attachment

Explanation:

A) kinetic energy

B) potential energy

C) Mechanical energy

a) The motorcyclist rises utilising chemical energy's "mechanical energy" (kinetic and potential energy). b) The cyclist's highest "gravitational potential energy" is transformed into motion downhill. c) When the rider moves downhill, potential energy becomes "kinetic energy." "Kinetic energy" is most vital.

a) "Mechanical energy" is used by the cyclist to ride up the slope. Kinetic and potential energy from an object's motion and position make up mechanical energy. As they pedal, cyclists transform chemical energy from their bodies into mechanical energy. This mechanical energy overcomes gravity as the cyclist climbs. As the cyclist climbs, potential energy accumulates, which is translated into kinetic energy as they descend.

b) At the summit of the slope, the biker has "gravitational potential energy." An object's gravitational potential energy depends on its position in a gravitational field. The biker has gained potential energy by climbing against gravity. At the crest of the hill, the cyclist's kinetic energy is lowest while potential energy is highest. The cyclist's potential energy is ready to be turned into kinetic energy as they descend.

c) Without pedalling, the rider gains "kinetic energy." The cyclist's speed increases as they descend, converting potential energy into kinetic energy. The cyclist's potential energy is turned into kinetic energy by gravity. As the rider descends, their potential energy diminishes but their kinetic energy increases, speeding up their bike. The biker converts potential energy into kinetic energy as he descends, and most of it is converted back at the bottom.

In conclusion, the cyclist climbs the incline using "mechanical energy" from chemical energy. They descend using "gravitational potential energy" at the top. Potential energy becomes "kinetic energy" when the rider descends without pedalling, speeding up the bike. Potential-to-kinetic energy conversion helps the cyclist climb the slope.

To know more about kinetic energy

https://brainly.com/question/8101588

#SPJ2

Answer:

d. ice

Explanation:

Answer:

The correct answer is C. Ice, you know, since it's so slippery. lol

pls give brainliest