For this assignment, you will create flowchart usingFlowgorithm and Pseudocode for the following program example:You are to design a program for Alexander’s Coffee Shopproviding customer research data. When a customer places an order,the clerk asks the customer for their zip code and age. The clerkenters this data as well as the number of items purchased. Theprogram should operate continuously until the clerk enters a 0 forthe zip code at the end of the day. If the clerk enters an invalidage (defined as less than 10 or more than 100), an error message isdisplayed and the program re-prompts the clerk continuously toenter a valid age. At the end of the program, display the averagecustomer age as well as counts of the number of items ordered bycustomers under the age of 25 and customers 25 and older.

Answer:

The answer is interpret Proof is down below

Explanation:

Here is the proooooooffffffff i made a 90 but this one was right

Secondary sources interpret information gathered from primary sources.

A secondary source is known to be made up of discussion that is often based on a primary information source.

Hence, the feature of secondary sources are known to give some kind of interpretation to all the information that has been gathered from other primary sources.

Learn more about Secondary sources from

https://brainly.com/question/896456

#SPJ2

Answer:

4

Explanation:

Input/output, datapath, control, and memory

There wrong its C bold it.

:)))))

Answer:

when a file is double clicked it opens so you can see the file.

Explanation:

Answer:

DNS

Explanation:

Hope this helps

Answer:

The corrected program is:

import java.util.Scanner;

public class LabProgram{

public static void main(String[] args) {

Scanner scnr = new Scanner(System.in);

int qtr, dime, nickel, penny;

double dollars;

System.out.print("Quarters: ");

qtr =scnr.nextInt();

System.out.print("Dimes: ");

dime = scnr.nextInt();

System.out.print("Nickel: ");

nickel = scnr.nextInt();

System.out.print("Penny: ");

penny = scnr.nextInt();

dollars = qtr * 0.25 + dime * 0.1 + nickel * 0.05 + penny * 0.01;

System.out.printf("Amount: $%.2f\n", dollars);

System.out.print((dollars * 100)+" cents");

}

}

Explanation:

I've added the full program as an attachment where I used comments as explanation

Answer:

The solution is provided in the explanation section.

Detailed explanation is provided using comments within the code

Explanation:

import java.util.*;

public class Main {

//The Bubble sort method

public static void bb_Sort(int[] arr) {  

   int n = 10; //Length of array  

   int temp = 0; // create a temporal variable  

   for(int i=0; i < n; i++){  

         for(int j=1; j < (n-i); j++){  

           if(arr[j-1] > arr[j]){  

               // The bubble sort algorithm swaps elements  

               temp = arr[j-1];  

               arr[j-1] = arr[j];  

               arr[j] = temp;  

             }  

         }            

         }  

        }

 public static void main(String[] args) {

   //declaring the array of integers

   int [] array = new int[10];

   //Prompt user to add elements into the array

   Scanner in = new Scanner(System.in);

   //Use for loop to receive all 10 elements

   for(int i = 0; i<array.length; i++){

     System.out.println("Enter the next array Element");

     array[i] = in.nextInt();

   }

   //Print the array elements before bubble sort

   System.out.println("The Array before bubble sort");

   System.out.println(Arrays.toString(array));

   //Call bubble sort method

   bb_Sort(array);  

   System.out.println("Array After Bubble Sort");  

   System.out.println(Arrays.toString(array));

 }

}

Answer:

The answer to this question is given below in the explanation section.

Explanation:

The correct answer to this question is online decision support system. Because the decision support systems process the data, evaluate and predict the decision, and helps the decision-makers,  and offer real time information immediately in making the decision in an organization. So the correct answer to this question is the decision supports system.

Why other options are not correct

Because the transaction processing system can only process the transaction and have not the capability to make the decision for the future. Office support processing system support office work, while the batch processing system process the task into the batch without user involvement.   however, online executive processing does not make decisions and offer timely information to decision-makers in an organization.

Answer:

270 nsec

Explanation:

Ripple-carry adder is a combination of multiple full-adders. It is relatively slow as each full-adder waits for the output of a previous full-adder for its input.

Formula to calculate the delay of a ripple-carry adder is;

  = 2( n + 1 ) x D

delay in a full-adder = 150 nsec.

number of full-adders = number of ripple-carry bits = 8

 = 2 ( 8 + 1 ) x 150

 = 18 x 150

 = 270 nsec

Answer:

Throughout the interpretation section elsewhere here, the explanation of the problem is summarized.

Explanation:

In python:

print(steps_walked / 2000)

I believe the answer is A. because he has to listen to what the people tell him and he information he has to think about and make a choice on what to reply with.

I hope this helps and its correct please let me know if its wrong have a great day//night.

Answer:

And what??????????????

Answer:

false

Explanation:

1 MB = 0.001 GB

Answer:

Sentence: Jack or Peggy Zale must fix quickly the fax.

Correct: Either Jack or Peggy Zale must quickly fix the fax.

There are 2 errors in these sentence construction. In stating two persons as an option we must use the word "either" to indicate that you only have two choose from the two of them. The word "

Explanation:

The correct sentence would be "either Jake or Peggy Zale must quickly fix the fax".

In the question construction, there is a conjunction and misarrangement error.

In conclusion, the word " "either Jake or Peggy Zale must quickly fix the fax" is correct

Read more about conjunction

brainly.com/question/8094735

Answer:

Press and hold the power button for up to 10 seconds, until your Mac turns off. If that doesn't work, try using a cellular device to contact Apple Support.

Explanation:

If that also doesn't work try click the following keys altogether:

(press Command-Control-Eject on your keyboard)

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

This makes the laptop (macOS) instruct to restart immediately.

Hopefully this helps! If you need any additional help, feel free and don't hesitate to comment here or private message me!. Have a nice day/night! :))))

Another Tip:

(Press the shift, control, and option keys at the same time. While you are pressing those keys, also hold the power button along with that.)

(For at least 10 seconds)

Answer:

4096 VLANs

Explanation:

A VLAN (virtual LAN) is a group of devices on one or more LAN connected to each other without physical connections. VLANs help reduce collisions.

An 802.1Q Ethernet frame header has VLAN ID of 12 bit VLAN field. Hence the maximum number of possible VLAN ID is 4096 (2¹²).  This means that a switch supporting the 802.1Q protocol can have a maximum of 4096 VLANs

A lot of VLANs ID are supported by a switch. The maximum number of VLANs that can be configured on a switch supporting the 802.1Q protocol is 4,094 VLANS.

But that of 0x000 and 0xFFF are set apart. This therefore makes or leaves it as 4,094 possible VLANS limits. Under IEEE 802.1Q, the maximum number of VLANs that is found on an Ethernet network is 4,094.

Learn more about VLANs from

https://brainly.com/question/25867685

Answer:

The answer to this question is given below in the explanation section.

Explanation:

The correct answer to this question is an online decision support system. Because the decision support systems process the data, evaluate and predict the decision, and helps the decision-makers,  and offer real-time information immediately in making the decision in an organization. So the correct answer to this question is the decision supports system.

Why other options are not correct

Because the transaction processing system can only process the transaction and have not the capability to make the decision for the future. Office support processing system support office work, while the batch processing system process the task into the batch without user involvement.   however, online executive processing does not make decisions and offer timely information to decision-makers in an organization.

Answer: the answer is A.

Explanation: He has to listen to what the people tell him and think about the information he has and make a choice on what to reply with.

Answer:

lookup value

Explanation:

public class Drive {

   int miles;

   int gas;

   String carType;

   public String getGas(){

       return Integer.toBinaryString(gas);

   }

   public Drive(String driveCarType){

       carType = driveCarType;

   }

   public static void main(String [] args){

       System.out.println("Hello World!");

   }

}

I'm pretty new to Java myself, but I think this is what you wanted. I hope this helps!

Answer:

the clock rate of the first machine need to be 1.7 GHz

Explanation:

Given:

CPI of A = 1.9

CPI of B = 1.1

machine, B executes the same program with 20% less instructions and with a CPI of 1.1 at 800MHz

To find:

In order for the two machines to have the same performance, what does the clock rate of the first machine need to be

Solution:

CPU execution time = Instruction Count * Cycles per Instruction/ clock rate

CPU execution time = (IC * CPI) / clock rate

(IC * CPI) (A) / clock rate(A) =  (IC * CPI)B / clock rate(B)

(IC * 1.9) (A) / clock rate(A) = (IC * (1.1 * (1.0 - 0.20)))(B) / 800 * 10⁶ (B)

Notice that 0.20 is basically from 20% less instructions

(IC * 1.9)  / clock rate = (IC * (1.1 * (1.0 - 0.20))) / 800 * 10⁶

(IC * 1.9)  / clock rate =  (IC*(1.1 * ( 0.8))/800 * 10⁶

(IC * 1.9)  / clock rate =  (IC * 0.88) / 800 * 10⁶

clock rate (A) =  (IC * 1.9) / (IC * 0.88) / 800 * 10⁶

clock rate (A) =  (IC * 1.9) (800 * 10⁶) /  (IC * 0.88)

clock rate (A) = 1.9(800)(1000000)  / 0.88

clock rate (A) =  (1.9)(800000000)  / 0.88

clock rate (A) = 1520000000  / 0.88

clock rate (A) = 1727272727.272727

clock rate (A) = 1.7 GHz

Answer:

The equivalent if statements is:

ranforce = randi([0, 12]);

if (ranforce == 0)

     disp('There is no wind')

else  if(ranforce>0 && ranforce <7)

     disp('There is a breeze')

else  if(ranforce>6 && ranforce <10)

     disp('This is a gale')

else  if(ranforce>9 && ranforce <12)

     disp('It is a storm')

else  if(ranforce==12)

     disp('Hello, Hurricane!')

end

Explanation:

The solution is straight forward.

All you need to do is to replace the case statements with corresponding if or else if statements as shown in the answer section

Answer:

Written in Python

numVal = int(input("Input: "))

for i in range(numVal,0,-1):

    print(i)

print("Ready!")

Explanation:

This line prompts user for numVal

numVal = int(input("Input: "))

This line iterates from numVal to 1

for i in range(numVal,0,-1):

This line prints digits in descending order

    print(i)

This line prints the string "Ready!"

print("Ready!")

Answer:

True

Operating System

Booting

Answer:

B. The process will be terminated by the operating system.

Explanation:

When Round Robin is used for CPU scheduling, a time scheduler which is a component of the operating system is used in regulating the operation. A time limit is set for each of the processes to be run.

So, when a process fails to complete running before its time elapses, the time scheduler would log it off and return it to the queue. This queue is in a circular form and gives each of the processes a chance to run its course.

Based on the information given regarding CPU scheduling, the correct option is C. The process's state will be changed from running to blocked.

It should be noted that in a system where Round Robin is used for CPU scheduling, when a process cannot finish its computation during its current time quantum, the process's state will be changed from running to blocked.

It should be noted that a prices transition to a blocked state occurs when it's waiting for some events like a particular resource becoming available.

Learn more about CPU scheduling on:

https://brainly.com/question/19999569

Answer:

a task and a calendar entry

Explanation:

ITS RIGHT

Answer:

its A) a task and a calendar entry

Explanation:

correct on e2020

Answer:

import random

decisions = int(input("How many decisions: "))

for i in range(decisions):

   number = random.randint(0, 1)

   if number == 0:

       print("heads")

   else:

       print("tails")

Explanation:

*The code is in Python.

import the random to be able to generate random numbers

Ask the user to enter the number of decisions

Create a for loop that iterates number of decisions times. For each round; generate a number between 0 and 1 using the randint() method. Check the number. If it is equal to 0, print "heads". Otherwise, print "tails"

This is python code.

In python, you are supposed to put a colon at the end of while loops. This code does not have a colon after the while loop, therefore, you need to add a colon to the end of the statement.

The error to be fixed in the while loop is to add a colon at the end of the while statements.

x = 1

while (x<26)

     print(x)

     x = x + 1

This is the right code;

x = 1

while(x < 26):

   print(x)

   x = x + 1

The actual code , the while statement is missing a colon at the end of it.

The code is written in python. In python while or for loops statements always ends with a colon.

In the error code, there was no colon at the end of the while loop.

The right codes which I have written will print the value 1 to 25.

learn more on python loop here: https://brainly.com/question/19129298?referrer=searchResults

Answer:

C and G

Explanation:

In C language, the asterisks, ' * ', and the ampersand, ' & ', are used to create pointers and references to pointers respectively. The asterisks are used with unique identifiers to declare a pointer to a variable location in memory, while the ampersand is always placed before a variable name as an r_value to the pointer declared.