Answers
The value of x in the given digram using trigonometry to the nearest tenth is 7.15.
What does the word "angle" mean?In planar geometry, an angle is a form created by two rays or lines that terminate in the same place. The name "angle" comes from the Latin "angulus," which means "corner". The vertex and the two rays, which are referred to as the sides of an angle, are the shared termini of two rays.
Given an angle and the length of the adjacent side, we are to determine the value of the hypotenuse using cos.
Cos = adjacent / hypotenuse
cos 33 = 6 /x
x = 6 / cos 33
x = 6 / 0.83867
x = 7.15
To know more about angle visit:
https://brainly.com/question/28451077
#SPJ1
Related Questions
suppose that a factory produces light bulbs and the percentage of defective lightbulbs is 3.5%. if a sample of 550 light bulbs is selected at random, what is the probability that the number of defective bulbs in the sample is greater than 15?
Answers
The probability that the number of defective bulbs in the sample is greater than 15 is 0.401, or 40.1%.
This is a binomial distribution problem with n=550 and p=0.035. We want to find the probability that the number of defective bulbs in the sample is greater than 15, which can be written as P(X > 15), where X is the number of defective bulbs in the sample.
Using the binomial probability formula, we have:
P(X > 15) = 1 - P(X ≤ 15)
P(X ≤ 15) = Σi=0¹⁵ (550 chooseᵃ) * 0.035ᵃ * (1-0.035)⁵⁵⁰⁻ᵃ
We can use software or a calculator with a binomial probability distribution function to find this sum, which is approximately 0.599.
Therefore, the probability that the number of defective bulbs in the sample is greater than 15 is:
P(X > 15) = 1 - P(X ≤ 15) ≈ 1 - 0.599 = 0.401
So the probability that more than 15 bulbs in the sample are defective is approximately 0.401, or 40.1%.
Learn more about probability
brainly.com/question/29381779
#SPJ11
Examples of associative law of addition in matrix form
Answers
The associative law of addition states that (A + B) + C = A + (B + C). This can be expressed in matrix form as the addition of three matrices to give the same result.Let A, B, and C be 3x3 matrices.
The associative law of addition states that (A + B) + C = A + (B + C).
This can be expressed in matrix form as:
[tex]\begin{bmatrix}a_{11} & a_{12} & a_{13} \\a_{21} & a_{22} & a_{23} \\a_{31} & a_{32} & a_{33}\end{bmatrix}[/tex]
+
[tex]\begin{bmatrix}b_{11} & b_{12} & b_{13} \\b_{21} & b_{22} & b_{23} \\b_{31} & b_{32} & b_{33}\end{bmatrix}[/tex]
+
[tex]\begin{bmatrix}c_{11} & c_{12} & c_{13} \\c_{21} & c_{22} & c_{23} \\c_{31} & c_{32} & c_{33}\end{bmatrix}[/tex]
[tex]\begin{bmatrix}a_{11} + b_{11} + c_{11} & a_{12} + b_{12} + c_{12} & a_{13} + b_{13} + c_{13} \\a_{21} + b_{21} + c_{21} & a_{22} + b_{22} + c_{22} & a_{23} + b_{23} + c_{23} \\a_{31} + b_{31} + c_{31} & a_{32} + b_{32} + c_{32} & a_{33} + b_{33} + c_{33}\end{bmatrix}[/tex]
=
[tex]\begin{bmatrix}a_{11} + (b_{11} + c_{11}) & a_{12} + (b_{12} + c_{12}) & a_{13} + (b_{13} + c_{13}) \\a_{21} + (b_{21} + c_{21}) & a_{22} + (b_{22} + c_{22}) & a_{23} + (b_{23} + c_{23}) \\a_{31} + (b_{31} + c_{31}) & a_{32} + (b_{32} + c_{32}) & a_{33} + (b_{33} + c_{33})\end{bmatrix}[/tex]
Learn more about matrix here
https://brainly.com/question/28180105
#SPJ4
Compute each sum or differences
11/12 - 2/3
Answers
[tex]1/4\\[/tex]
Explanation:
To subtract 2/3 from 11/12, we need to find a common denominator for the two fractions. The least common multiple (LCM) of 3 and 12 is 12. We can rewrite each fraction with a denominator of 12:
11/12 - 2/3 = (11/12) - (2/3) * (4/4) (Multiplying the denominator and numerator of 2/3 by 4 to get a denominator of 12)
11/12 - 8/12 = 3/12
Now that both fractions have a common denominator of 12, we can subtract the numerators:
11/12 - 2/3 = (11 - 8)/12 = 3/12
Simplifying this fraction by dividing both the numerator and denominator by 3, we get:
3/12 = 1/4
Therefore, 11/12 - 2/3 = 1/4.
Do you know the answer?
Answers
Answer:
A. No Solution
B. Unique Solution (0,0)
Step-by-step explanation: When you are dealing with a system of equations and they have the same variables with the same coeffiencts adding up to different numbers, it is unsolvable and therefore has no-solution. When you are dealing with two y-values equaling different amounts of x-values, 0 satisfy both varaibles.
If you approach this from a graphing perspective, you can put both equations in the system into slope intercept form.
System A:
Line 1: 3x + 5y = 8
5y = -3x + 8
y = -3/5 x + 8/5
Line 2: 3x + 5y = 7
5y = -3x + 7
y = -3/5 x + 7/5
Because both lines have the same slope, but different y-intercepts, the lines are parallel and will never intersect. This is why there is no solution to the system.
System B:
Line 1: y = 7x is in slope intercept form.
Line 1: y = 3x is in slope intercept form.
Since these lines have different slopes, they are guaranteed to intersect only once. There is a single solution.
If you graph these lines, they will intersect at the origin, at (0,0), since that is a common point on both lines.
The orange spinner is spun and then the aqua spinner is spun. What is the probability that the numbers will add to 4 or less?
50%
25%
3/8
7/16
Answers
Answer:
n
Step-by-step explanation:
less
Triangle ABC has vertices A(1, 3), B(−2, −1), and C(3,−2).
After going through the following glide reflection, find the coordinates for A′′, B′′, and C′′.
Translation: along <0, −2>
Reflection: across x-axis
Answers
The Coordinates of A′′, B′′, and C′′ are (1, -1),(-2, 3) and (3, 4).
What is Coordinate system ?
A coordinate system is a system that defines how points in space or on a plane can be located and labeled using a set of numbers or coordinates. In a two-dimensional coordinate system, the points are located on a plane, while in a three-dimensional coordinate system, the points are located in space.
First, we apply the translation of moving all points down by 2 units.
A(1, 3) is transformed to A'(1, 1) by subtracting 2 from the y-coordinate.
B(−2, −1) is transformed to B'(-2, −3) by subtracting 2 from the y-coordinate.
C(3,−2) is transformed to C'(3, −4) by subtracting 2 from the y-coordinate.
Next, we apply the reflection across the x-axis.
A'(1, 1) is transformed to A''(1, -1) by negating the y-coordinate.
B'(-2, −3) is transformed to B''(-2, 3) by negating the y-coordinate.
C'(3, −4) is transformed to C''(3, 4) by negating the y-coordinate.
Therefore, the coordinates for A'', B'', and C'' are:
A''(1, -1)
B''(-2, 3)
C''(3, 4)
To learn more about Coordinate system, visit the link:
https://brainly.com/question/4726772
#SPJ1
What is the area of a sector with a central angle of 180° and a diameter of 21.2 cm?
Use 3.14 for πand round your final answer to the nearest hundredth.
Enter your answer as a decimal in the box.
cm²
Answers
The area of the sector with a central angle of 180° as required to be determined in the task content is; 176.41 cm².
What is the area of the sector described?It follows from the task content that the sector in discuss has a central angle of 180° and a diameter of 21.2 cm.
Recall the area of a sector is;
Area, A = (theta/360) × πr²
where r = diameter / 2
r = 21.2/2
r = 10.6 cm.
A = (180/360) × 3.14 × 10.6²
Area, A = 176.41 cm².
Ultimately, the area of the sector is; 176.41 cm².
Read more on area of a sector;
https://brainly.com/question/22972014
#SPJ1
Triangle A″B″C″ is formed by a reflection over x = −1 and dilation by a scale factor of 4 from the origin. Which equation shows the correct relationship between ΔABC and ΔA″B″C″?
segment A double prime B double prime equals four segment BC
segment BC equals 4 segment A double prime B double prime
segment AB over segment A double prime B double prime equals one fourth
segment C double prime A double prime over segment CA equals one fourth
Answers
Triangle A″B″C″ is formed by a reflection over x = −1 and dilation by a scale factor of 4 from the origin. segment A double prime B double prime equals four segment BC ,equation shows the correct relationship between ΔABC and ΔA″B″C″
The equation that correctly shows the relationship between ΔABC and ΔA″B″C″ is C″A″/CA = 1/4. Triangle A″B″C″ is formed by reflecting triangle ABC over the line x = -1 and dilating it by a scale factor of 4. The reflection of a triangle preserves its angles and its sides are reversed, while the dilatation stretches the triangle out by a factor of 4. Therefore, the ratio between C″A″ and CA will be 1/4.
For such more questions on Triangle A″B″C″:
brainly.com/question/29568285
#SPJ11
Type the correct answer in each box. Use numerals instead of words.
What are the x-intercept and vertex of this quadratic function?
g(x) = -5(x − 3)²
-
Write each feature as an ordered pair: (a,b).
The x-intercept of function g is
Answers
The x-intercept of g(x) is (3,0) and the vertex of g(x) is (3,0).
What is the x-intercept of the function?
To find the x-intercept of the quadratic function g(x), we need to set g(x) equal to zero and solve for x:
0 = -5(x - 3)²
Dividing both sides by -5, we get:
0 = (x - 3)²
Taking the square root of both sides, we get:
x - 3 = 0
x = 3
So the x-intercept of the function g(x) is (3,0).
To find the vertex of the function g(x), we can use the formula:
vertex = (h, k)
where;
h is the x-coordinate of the vertex and k is the y-coordinate of the vertex.For a quadratic function in the form:
f(x) = a(x - h)² + k
the vertex is located at the point (h, k).
In the given function g(x), we can see that a = -5, h = 3, and k = 0.
So the vertex of the function g(x) is:
vertex = (h, k) = (3, 0)
Learn more about x-intercept here: https://brainly.com/question/17932786
#SPJ1
Find the amplitude, phase shift, and period of the function.
y = 2 – (1/2) cos (3x+π)
Give the exact values, not decimal approximations. Amplitude: ___
Phase shift: ___
Period: ____
Answers
The amplitude οf the functiοn is 1/2, the phase shift is (-π)/3, and the periοd is 2π/3.
What is Phase Shift?Phase shift simply means that the twο signals are at different pοints οf their cycle at a given time.
The given functiοn is y = 2 – (1/2) cοs (3x+π).
We can see that the general fοrm οf this functiοn is y = A cοs (Bx - C) + D, where A is the amplitude, B is the frequency, C is the phase shift, and D is the verticaI shift.
Cοmparing the given functiοn with the general fοrm, we can see that:
A = 1/2
B = 3
C = -π
D = 2
Therefοre, the amplitude is |A| = 1/2.
The phase shift is given by C/B = (-π)/3.
The periοd οf the functiοn is given by T = 2π/B = 2π/3.
Learn more about phase shift on:
https://brainly.com/question/29255767
#SPJ1
An engineer is using a polynomial function to model the height of a roller coaster over time x, as shown.
On a coordinate plane, a curve increases from quadrant 3 and crosses the y-axis at (0, 4). It then decreases and crosses the x-axis at (5, 0). It continues to decrease and then starts to increase and crosses the x-axis at (8, 0).
The engineer wants to modify the roller coaster design by transforming the function. Which represents 2 f (0.3 x minus 1) + 10, the modified design of the roller coaster?
On a coordinate plane, a curve increases from quadrant 3 and crosses the y-axis at (0, 10). It then decreases and goes through (20, 10). It continues to decrease and then starts to increase and goes through (30, 10).
On a coordinate plane, a curve increases from quadrant 3 and crosses the y-axis at (0, negative 10). It then decreases and goes through (20, negative 10). It continues to decrease and then starts to increase and goes through (30, negative 10).
On a coordinate plane, a curve increases from quadrant 3 and crosses the y-axis at (0, 20). It then decreases and then increases again.
On a coordinate plane, a curve increases from quadrant 3 and crosses the y-axis at (0, 10). It then decreases and goes through (20, negative 10). It continues to decrease and then starts to increase and goes through (30, negative 10).
Answers
The polynomial function is therefore a quadratic function with the formula (3x - 10)²/25 + 10.
What is the rollercoaster polynomial equation?Unlike the graph that depicts the stock market, the functions for roller coasters need to be smooth curves. The polynomial function[tex]f(x)= -0.000833^{(x3 + 12x2 -580x -1200)[/tex] can be used to depict a simple rollercoaster.
According to the information provided, the original function was as follows: vertical stretch by a factor of 2 horizontal compression by a factor of 1/0.3 = 10/3 horizontal shift right by one unit.
Starting with a common function like f(x) = x², we can perform the following transformations:
Replace x with 3x/10 for the horizontal compression factor, and with 3x/10 for the horizontal shift to the right. Replace x with 3x/10 - 1 for the vertical stretch factor. Vertically move up 10 units by replacing y with 2y: y = 2y + 10.
When you combine everything, you get:
2 f(0.3x - 1) + 10
= 2 (2(3x/10 - 1)² + 10)
= (3x - 10)²/25 + 10
To know more about polynomial function visit:-
brainly.com/question/12976257
#SPJ1
Please ASAP Help
Will mark brainlest due at 12:00
Answers
Answer:
-2b+12
Step-by-step explanation:
Answer:
-2b+12
Step-by-step explanation:
-2b-4(b+3)-4b
-2b+4b+12-4b
-2b+12
In a math class with 23 students, a test was given the same day that an assignment was due. There were 15 students who passed the test and 18 students who completed the assignment. There were 13 students who passed the test and also completed the assignment. What is the probability that a student chosen randomly from the class failed the test and did not complete the homework?
Answers
Answer: To find the probability that a student chosen randomly failed the test and did not complete the homework, we need to subtract the number of students who passed the test and/or completed the homework from the total number of students in the class. Then, we can divide that number by the total number of students in the class to get the probability.
To start, we can use the information given in the problem to create a Venn diagram:
```
Test
|------|------|
| | |
Fail | | |
| | |
--------|------|------|
| | |
| | |
Pass | | |
Assignment|------|------|
| | |
| | |
```
From the diagram, we can see that the number of students who failed the test and did not complete the homework is the number of students outside the intersection of the two circles. To find this number, we can add the number of students who passed the test but did not complete the homework to the number of students who completed the homework but did not pass the test, and then subtract the number of students who passed the test and completed the homework:
Number of students who failed the test and did not complete the homework = (Number of students who passed the test but did not complete the homework) + (Number of students who completed the homework but did not pass the test) - (Number of students who passed the test and completed the homework)
Number of students who failed the test and did not complete the homework = (15 - 13) + (18 - 13) - 13
Number of students who failed the test and did not complete the homework = 4
Therefore, there are 4 students who failed the test and did not complete the homework.
To find the probability of choosing one of these students at random, we can divide the number of students who meet both conditions by the total number of students:
Probability of choosing a student who failed the test and did not complete the homework = Number of students who failed the test and did not complete the homework / Total number of students
Probability of choosing a student who failed the test and did not complete the homework = 4 / 23
Probability of choosing a student who failed the test and did not complete the homework ≈ 0.17
Therefore, the probability that a student chosen randomly from the class failed the test and did not complete the homework is approximately 0.17, or 17% (rounded to two decimal places).
Q (6
(611)
Triangle STU with coordinates S(3, 6), T(4,4), and U(5,1) is rotated 90° clockwise. List the
12 (5+1)
coordinates of the new image.
5' (2-6)
Answers
The coordinates of the new image are S(3, 6) → (-6, 3), T(4,4) → (-4, 4), and U(5,1) → (-1, 5).
What in geometry is a transformation matrix?For describing a geometric transformation such a translation, rotation, scaling, or shearing, a matrix known as a transformation matrix is utilised. By multiplying the matrix by the column matrix of the original coordinates, the matrix is used to change the coordinates of points in a geometric figure. The modified figure is then drawn using the resultant transformed coordinates.
Given that the coordinates of the point are:
S(3, 6), T(4,4), and U(5,1)
When the figure is rotated by 90 degrees the resultant image has the following coordinates.
(x, y) → (-y, x)
Thus,
S(3, 6) → (-6, 3)
T(4,4) → (-4, 4), and
U(5,1) → (-1, 5)
Hence, the coordinates of the new image are S(3, 6) → (-6, 3), T(4,4) → (-4, 4), and U(5,1) → (-1, 5).
Learn more about transformation here:
https://brainly.com/question/5994940
#SPJ1
What is m∠1
m
∠
1
, in degrees, in the figure below?
Two intersecting lines that form 4 angles. Angle one is adjacent to angle two and together form a straight angle. Angle two is vertical to the angle labeled X minus 30 degrees, which is adjacent to the angle labeled 2 X plus 15 degrees. Together, these two angles also form a straight angle.
Answers
The value οf m∠1 is 145 degrees is adjacent to the angle labelled 2 X plus 15 degrees..
What are linear pair angles?Pairs οf angles that adds uptο 180 degrees . when a segment is intersected then the angle fοrmed are knοwn as angles in linear pair. the angles add uptο 180 degrees
We are given twο angle in linear pair
And we knοw that there additiοn is 180 degrees.
we have,
x- 30 + 2x+15= 180
3x-15= 180
3x =195
x=65 degrees
2x +15 and m∠1 are vertically οppοsite angle.
Hence they are οf equal measure
Hence
m∠1 = 2x+15
m∠1 = 2(65)+15
m∠1 = 145 degrees
Hence, The value οf m∠1 is 145 degrees.
Given below is a link of angle please refer
https://brainly.com/question/1757859
#SPJ1
Geet sells televisions. He earns a fixed amount for each television and an additional $30 if the buyer gets an extended warranty. If Geet sells 18 televisions with extended warranties, He earns $1,710. How much is the fixed amount Geet earns for each television?
Answers
Answer:
understand
Step-by-step explanation:
The fixed amount Geet earns for each television is $60.
This trapezoid has been divided into two right triangles and a rectangle.
How can the area of the trapezoid be determined using the area of each shape?
Enter your answers in the boxes.
The area of the rectangle is in², the area of the triangle on the left is in², and the area of the triangle on the right is in².
The area of the trapezoid is the sum of these areas, which is in².
Trapezoid ABCD with parallel sides DC and AB. Points F and E are between D and C. FEBA form a rectangle with 4 right angles. D F is 2 inches, F E is 14 inches, E C is 2 inches, A B is 14 inches., and E B is 12 inches.
Answers
Answer:
here it is
Step-by-step explanation:
This trapezoid has been divided into two right triangles and a rectangle.
How can the area of the trapezoid be determined using the area of each shape?
Enter your answers in the boxes.
The area of the rectangle is in², the area of the triangle on the left is in², and the area of the triangle on the right is in².
The area of the trapezoid is the sum of these areas, which is in².
Trapezoid ABCD with parallel sides DC and AB. Points F and E are between D and C. FEBA form a rectangle with 4 right angles. D F is 2 inches, F E is 14 inches, E C is 2 inches, A B is 14 inches., and E B is 12 inches.
A cone has base area 25 mm². A parallel slice 6 mm from the vertex has area 36 mm². Find the height of
the cone.
Answers
Therefore , the solution of the given problem of area comes out to be the cone has a 5 millimetre height.
What exactly is area?Calculating how much space would be needed to fully cover the outside will reveal its overall size. When calculating a trapezoidal form's surface, the environs were also taken into account. The surface area of something determines its overall measurements. The amount of edges connecting each of a cuboid's four parallelogram ends reveals how much underground water it can hold.
Here,
Let's name the cone using the details provided:
Its base measures 25 mm2.
A parallel slice 6 mm from the vertex has a 36 mm2 surface.
We can use the fact that the area of a circular slice of a cone is proportional to the square of its distance from the vertex to build up a proportion:
(area of slice) / (base area) Equals (distance from vertex) / (height) 2/ (area from slice)
When we enter the numbers we are aware of, we obtain:
=> 36 / 25 = 6² / h²
If we simplify, we get:
=> h² = (25 * 6²) / 36 = 25
When we square the two edges, we obtain:
=> h = 5
As a result, the cone has a 5 millimetre height.
To know more about area visit:
https://brainly.com/question/2835293
#SPJ1
could anyone help :(
cos(x)=0.6
find two numerical solutions ?
Answers
The two numerical solutions of the given trigonometric functions are: 53.13° or 306.87°
How to solve trigonometric ratios?In the first quadrant, where the value of x and y coordinates are all positive, it is well known that all the six trigonometric functions possess positive values. In the second quadrant, we see that only sine and cosecant (which is the reciprocal of sine) possess positive values. In the third quadrant, we see that only tangent and cotangent possess positive positive values.
The cosine function is positive in the first and fourth quadrants.
Now, we are told that;
cos(x) = 0.6
Thus;
x = cos⁻¹(0.6)
x = 53.13° or 306.87°
These are the numerical solutions required.
Read more about Trigonometric Ratios at; https://brainly.com/question/13276558
#SPJ1
Factor the expression completely.
−
100
�
5
+
90
−100x
5
+90
Answers
The expression [tex]-100^5 + 90[/tex] is completely factored as [tex]-(10^5 + 3)(10^5 - 3)[/tex].
What is an expressiοn?Mathematical expressiοns cοnsist οf at least twο numbers οr variables, at least οne arithmetic οperatiοn, and a statement. It's pοssible tο multiply, divide, add, οr subtract with this mathematical οperatiοn.
The expression [tex]-100^5 + 90[/tex] can be factοred as follows -
Grοup the negative sign with the first term -
[tex]= -(100^5) + 90[/tex]
Evaluate [tex]100^5[/tex] as [tex](10^2)^5 = 10^{10}[/tex] -
[tex]= -(10^{10}) + 90[/tex]
Factor οut a negative sign -
[tex]= -(10^{10} - 90)[/tex]
Factor the difference of twο squares, where [tex]a = 10^5[/tex] and b = 3 -
[tex]= -(10^5 + 3)(10^5 - 3)[/tex]
Therefore, the expressiοn is factored as [tex]-(10^5 + 3)(10^5 - 3)[/tex].
To learn more abοut expression from the given link
https://brainly.com/question/24734894
#SPJ1
Nicholas calculated the volume of the prism his work is shown below. (or above)
where, if any, did Nikolas first make a mistake in his work?
A) Nikolas used the wrong measurements when finding the area of the base.
B) Nicholas used the wrong formula for the volume of the prism.
C) Nicholas made a computational error.
D) Nicholas did not make a mistake.
Answers
Answer:
D.
Step-by-step explanation:
Nikolas did not make a mistake. The formula to calculate volume of a triangular prism is
[tex]V=Bh[/tex]
where B is the area of the base and h is the height.
The area of the triangular base is [tex](0/5)(5.8)(6.2) = 17.98[/tex].
[tex]Bh = 17.98 * 9.2 = 165.416 ft^3[/tex]
Do only number 4 please
Answers
Answer:
baby formulaa for sure (wut ur school I got same question)
Step-by-step explanation:
add sum purple to yo nails
Please specify whether each of the following items would be counted as part of investment in the c i g (x - m) equation. And why?
Answers
In response to the given question, we can state that An increase in firm expressions inventories: This would be considered investment because it indicates an increase in items created but not yet sold.
what is expression ?In mathematics, you can multiply, divide, add, or subtract. An expression is formed as follows: Expression, number, and math operator Numbers, parameters, and functions make up a mathematical expression. It is possible to contrast phrases and expressions. Every mathematical statement that comprises variables, numbers, and a mathematical action between them is referred to as an expression. For example, the phrase 4m + 5 is made up of the phrases 4m and 5, as well as the variable m from the provided equation, all separated by the mathematical symbol +.
A firm constructs a new factory: Indeed, because it reflects an increase in actual capital goods utilised for manufacturing, this would be considered investment.
A family buying a new refrigerator: No, because it is a consumer expenditure rather than a capital good utilised for production, this would not be considered investment.
Indeed, a government building a new roadway would be considered an investment since it increases the physical infrastructure needed for manufacturing.
An increase in firm inventories: This would be considered investment because it indicates an increase in items created but not yet sold.
To know more about expressions visit :-
https://brainly.com/question/14083225
#SPJ1
AC method factoring requires the polynomial to be
Answers
Omar has 7 2/5 yards of ribbon to make bows. Each bow is made from a piece of ribbon that is 3/5 yard long. What is the maximum number of complete bows Omar can make?
Answers
Omar can make a maximum of 12 complete bows from the given length of ribbon.
How To find the maximum number of complete bows?
To find the maximum number of complete bows Omar can make, we need to divide the total length of ribbon he has by the length of ribbon needed for each bow, and then round down to the nearest whole number since we can only make complete bows.
First, we need to convert 7 2/5 yards to an improper fraction so that we can work with it more easily. To do this, we multiply the whole number (7) by the denominator of the fraction (5), and then add the numerator (2):
7 2/5 = (7 x 5) + 2/5 = 35/5 + 2/5 = 37/5 yards
Now we can divide the total length of the ribbon by the length needed for each bow:
37/5 ÷ 3/5 = 37/5 x 5/3 = 37/3
This gives us a fraction, but we want a whole number, so we round down to the nearest integer:
37/3 ≈ 12.33
Since we can only make complete bows, the maximum number of bows Omar can make is 12.
Therefore, Omar can make a maximum of 12 complete bows from the given length of ribbon.
Learn more about improper fraction
https://brainly.com/question/21449807
#SPJ1
Answer:
12
Step-by-step explanation:
The maximum number of complete bows omar can make is 12
One angle of a triangle measures 10°. The other two angles are in a ratio of 3:14. What are the measures of those two angle
Answers
Answer: Let's denote the two unknown angles as x and y.
We know that the sum of the three angles in a triangle is 180 degrees. So we can set up the following equation:
10 + 3x + 14x = 180
Simplifying the equation:
17x = 170
x = 10
Now we can use the ratio of the other two angles to find the value of y:
3:14 can be simplified as 3x:14x or x:4.67x
So y is 4.67 times larger than x:
y = 4.67x = 4.67(10) = 46.7
Therefore, the measures of the two unknown angles are x = 10 degrees and y = 46.7 degrees.
Step-by-step explanation:
The measure of the remaining two angles are 46.7
What is the angle sum property of a triangle?The angle sum property of a triangle states that the sum of interior angles of a triangle is 180°
Given here, One angle of a triangle measures 100°. the other two angles are in a ratio of 3:14. Then let the measure of the angles be 3x and 14x
thus using the angle sum property we have
[tex]3x+14x=80[/tex]
[tex]17x= 80[/tex]
[tex]x = 46.7[/tex]
Hence, The measure of the remaining two angles are 46.7
Learn more about the angle sum property here:
https://brainly.com/question/11806229
whats the missing side lengths!
Answers
Answer:
x = 3[tex]\sqrt{2}[/tex] , y = [tex]\frac{3\sqrt{2} }{2}[/tex]
Step-by-step explanation:
this is a 90- 45- 45 isosceles triangle with legs congruent , that is
y = [tex]\frac{3\sqrt{2} }{2}[/tex]
using Pythagoras' identity in the right triangle
x² = ( [tex]\frac{3\sqrt{2} }{2}[/tex] )² + y²
= ( [tex]\frac{3\sqrt{2} }{2}[/tex] )² + ( [tex]\frac{3\sqrt{2} }{2}[/tex] )² = 9 + 9 = 18 ( take square root of both sides )
x = [tex]\sqrt{18}[/tex] = [tex]\sqrt{9(2)}[/tex] = [tex]\sqrt{9}[/tex] × [tex]\sqrt{2}[/tex] = 3[tex]\sqrt{2}[/tex]
Calculate to the nearest 0.1, the sizes of beta and gamma.
Will give brainliest, and rate 5 stars to the most brilliant answer.
Need it urgently
Due tomorrow
Thanks.
Answers
By using trigοnοmetric functiοns, the sizes οf β and γ, tο the nearest 0.1, are β ≈ 24.0 degrees and γ ≈ 63.4 degrees
What are trigοnοmetric functiοns?The basic trigοnοmetric functiοns are:
Sine (sin): the ratiο οf the length οf the side οppοsite an angle tο the length οf the hypοtenuse οf the triangle.
Cοsine (cοs): the ratiο οf the length οf the side adjacent tο an angle tο the length οf the hypοtenuse οf the triangle.
Tangent (tan): the ratiο οf the length οf the side οppοsite an angle tο the length οf the side adjacent tο the angle.
Fοr the first right triangle:
Using the trigοnοmetric functiοn tangent, we have:
tan(β) = οppοsite side / adjacent side
tan(β) = 9/20
Taking the inverse tangent οf bοth sides, we get:
β = tan⁻¹(9/20)
Using a calculatοr, we can find that:
β ≈ 24.0 degrees
Fοr the secοnd right triangle:
Using the trigοnοmetric functiοn cοsine, we have:
cοs(γ) = adjacent side / hypοtenuse
cοs(γ) = 6/15
Taking the inverse cοsine οf bοth sides, we get:
γ = cοs⁻¹(6/15)
Using a calculatοr, we can find that:
γ ≈ 63.4 degrees
Therefοre, the sizes οf β and γ, tο the nearest 0.1, are:
β ≈ 24.0 degrees
γ ≈ 63.4 degrees
To know more about trigonometric functions visit:
brainly.com/question/30339626
#SPJ1
Show that abcd is a trapezoid
Answers
Slope AB = slope CD = 1/1 and slope BC ≠ slope DA. Therefore, AB and CD are parallel sides, and ABCD is a trapezoid.
Describe Trapezoid?In geometry, a trapezoid (also known as a trapezium in some countries) is a quadrilateral with at least one pair of parallel sides. The parallel sides are called the bases of the trapezoid, and the other two sides are called the legs.
The trapezoid can be classified into three types based on the positions of the bases:
Isosceles trapezoid: A trapezoid in which the non-parallel sides are congruent.
Right trapezoid: A trapezoid in which one of the angles formed by the legs is a right angle.
Scalene trapezoid: A trapezoid in which none of the sides are congruent.
The area of a trapezoid can be calculated by the formula:
A = (b1 + b2)h/2
where b1 and b2 are the lengths of the bases and h is the height of the trapezoid (the perpendicular distance between the bases).
To show that ABCD is a trapezoid, we need to demonstrate that it has at least one pair of parallel sides. One way to do this is to calculate the slopes of the line segments that connect the vertices.
The slope of a line passing through two points (x1, y1) and (x2, y2) is given by:
slope = (y2 - y1) / (x2 - x1)
Using this formula, we can calculate the slopes of the four line segments:
slope AB = (4 - 1) / (2 - (-1)) = 3/3 = 1
slope BC = (1 - 4) / (3 - 2) = -3/1 = -3
slope CD = (-3 - 1) / (-3 - 3) = -4/-6 = 2/3
slope DA = (1 - (-3)) / (-1 - (-3)) = 4/2 = 2
We can see that slope AB = slope CD = 1/1 and slope BC ≠ slope DA. Therefore, AB and CD are parallel sides, and ABCD is a trapezoid.
To know more about slopes visit:
https://brainly.com/question/30732396
#SPJ1
A cylinder has a height of 23 m and a volume of 18,488 m³. what is the radius of the cylinder? round your answer to the nearest whole number. responses 256 m 256 m 50 m 50 m 32 m 32 m 16 m
Answers
Answer:
Step-by-step explanation:
The volume for a right cylinder is
[tex]V=\pi r^2h[/tex]
We are given all the values except the radius, so we plug them in as follows:
[tex]18488=\pi r^2(23)[/tex]
Begin by dividing by 23π to get
255.8657603 = r²
and then take the square root of both sides to find that
r = 15.995 or 16 m