Couplers shall develop at least__ of the actual breaking strength of the prestressing steel strand

A flow idealized as a throttling process through a device has D. h2 = h1 and p2<p1.

A throttling process is a measure in which a throttling valve is used to depressurize a high-pressure fluid into a low-pressure fluid. In this case, the enthalpy remains the same, in which case, h2 equals h1.

But there is a reduction in pressure in which case the second pressure will be less than the first pressure. So, P2 is less than P1. Of the options listed, option D fits best.

Learn more about the throttling process here:

https://brainly.com/question/12977208

#SPJ4

When it comes to shoring a building or structure, it's essential to know the weight of the materials that need to be shored up.

Common building materials vary in weight, and it's important to have a general understanding of the weight of each material to make the shoring process effective. One of the heaviest building materials is concrete, which can weigh up to 150 pounds per cubic foot. Other heavy materials include brick and stone, which can weigh up to 120 pounds per cubic foot. Steel is also a heavy material, with a weight of up to 490 pounds per cubic foot. Lighter materials that are commonly used in building construction include drywall, which weighs around 1.7 pounds per square foot, and plywood, which weighs around 2.5 pounds per square foot. Fiberglass insulation is another lightweight material, with a weight of around 0.5 pounds per cubic foot.

It's important to note that the weight of building materials can vary based on their thickness, density, and size. Before shoring a building or structure, it's crucial to assess the weight of the materials that need to be supported to ensure that the shoring is effective and safe. Proper shoring can prevent further damage to the structure and ensure the safety of rescuers and anyone else in the vicinity.

Learn more insulation here: https://brainly.com/question/14363642

#SPJ11

a. The regular expression b*(ab)*a* matches any string that starts with any number of b's, followed by any number of repetitions of "ab", and ends with any number of "a's". To find a string of minimum length not in this language, we can try to create a string that doesn't have any "ab" substrings. The shortest string that fits this criterion is "a".

b. The regular expression (a*+b*)(a*+b*)(a*+b*) matches any string that consists of three blocks, where each block can have any number of a's and b's. To find a string of minimum length not in this language, we can try to create a string that doesn't have three blocks. The shortest string that fits this criterion is either "a" or "b".

c. The regular expression a*(baa*)*b* matches any string that starts with any number of a's, followed by any number of repetitions of "baa", and ends with any number of b's. To find a string of minimum length not in this language, we can try to create a string that doesn't have any "baa" substrings. The shortest string that fits this criterion is "b".

d. The regular expression b*(a+ba)*b* matches any string that starts and ends with any number of b's, and has either an "a" or "ba" substring somewhere in the middle. To find a string of minimum length not in this language, we can try to create a string that doesn't have any "a" or "ba" substrings. The shortest string that fits this criterion is "bb".

Learn more about regular expression: https://brainly.com/question/27805410

#SPJ11

The standard accepted load ratings for a cribbing shoring system vary depending on the specific application and circumstances.

Generally, load ratings are determined by factors such as soil type, depth of excavation, and the weight and type of equipment or materials being supported. For example, a shoring system used to support a building foundation may have a higher load rating than one used for temporary excavation support. Additionally, load ratings may be regulated by local building codes or industry standards. It is important to consult with a qualified engineer or shoring system provider to determine the appropriate load rating for a specific project.

learn more about shoring system here:

https://brainly.com/question/8416678

#SPJ11

The  dialect L = L(aaaa*b*): The dialect L comprises of all strings that begin with four continuous a's, taken after by zero or more b's. The taking after could be a depiction of a Turing machine that acknowledges this language below.

The Turing machine begins within the beginning state q0. In state q0, the machine filters the input tape seeking out for the primary a. When it finds an a, it composes a extraordinary image "#" on the tape, moves the head to the proper, and moves to state q1.

Therefore, In state q1, the machine uses an input symbol and checks on the off chance that it is an a or a b. If it is an a, it composes the image "#" on the tape, moves the head to the proper, and remains in state q1. If it could be a b, the machine moves to state q2.

Learn more about Turing machine   from

https://brainly.com/question/27851066

#SPJ4

The x-rays at the center of the beam are collectively known as the "central or primary beam" and are the most intense part of the x-ray beam.

In radiography, the x-ray beam is the primary source of radiation used to produce images of internal structures of the body. The central or primary beam refers to the x-rays that pass directly through the center of the beam and are the most intense part of the x-ray beam. These x-rays are important for creating high-quality images of the area of interest. However, it's important to limit exposure to the primary beam as much as possible to avoid unnecessary radiation exposure. Shielding and collimation techniques are used to help minimize radiation exposure to the patient and healthcare providers.

Learn more about x-ray beam here:

https://brainly.com/question/30247302

#SPJ11

The x-rays at the center of the beam are known collectively as central x-rays.

The x-rays at the center of the beam are referred to as the central or primary x-rays. When an x-ray beam is produced, it consists of a range of energies.

The central x-rays refer to the x-rays with the highest energy levels that are emitted from the focal spot of the x-ray tube. These x-rays travel in a straight line and have the greatest intensity at the center of the beam.

They play a crucial role in medical imaging and are responsible for creating the primary diagnostic information in X-ray radiography and computed tomography (CT) scans.

Read more about x-rays

brainly.com/question/24505239

#SPJ4

The largest charge for carbon steel pressure pipe with exothermic welding is typically around 45 grams. Exothermic welding is a method of creating a permanent bond between two conductors using molten metal. In this case, the conductors are the carbon steel pressure pipes.

The exothermic welding process involves a reaction between a powdered mixture of copper oxide and aluminum. When this mixture is ignited, it creates an exothermic reaction that generates heat of up to 3,500°C. This heat melts the powdered mixture and the copper and aluminum react to form molten copper.

This molten copper is then poured into a graphite mold that surrounds the two conductors to be joined. The molten copper fills the mold and bonds the conductors together. The amount of powdered mixture used in the reaction determines the size of the charge, with larger charges producing more molten copper and stronger bonds. Typically, the largest charge used for carbon steel pressure pipes is around 45 grams. However, the exact amount of powdered mixture needed can vary depending on the size and thickness of the pipes being joined, as well as the specific requirements of the application.

Learn more about welding here:

https://brainly.com/question/29654991

#SPJ11

The break-even threshold is reached when overall costs and total revenues are equal, leaving your small firm with no net benefit or loss.

Thus,  In other words, you've achieved the point in production where the revenue from a product equals the cost of manufacture.

This is a crucial calculation to include in your business plan for every new venture. Potential investors want to know when they may expect a return on their investment as well as the rate at which it will occur.

This is due to the fact that some businesses may take years before becoming profitable, frequently losing money in the initial months or years before achieving break-even. Therefore, break-even point is a crucial component of any business plan.

Thus, The break-even threshold is reached when overall costs and total revenues are equal, leaving your small firm with no net benefit or loss.

Learn more about Break even, refer to the link:

https://brainly.com/question/29063970

#SPJ1

Cleaning the tendon tails prior to stressing improves the overall performance and durability of the tendons in a post-tensioning system. By ensuring that the tendon tails are free of dirt, debris, and any surface contaminants, the stressing process can be carried out more effectively and safely.

Proper cleaning of tendon tails prevents the introduction of foreign materials into the anchorage system, which can lead to potential issues such as corrosion, uneven stress distribution, and premature failure. Additionally, clean tendon tails allow for a better connection between the tendons and the stressing equipment, ensuring that the required force is applied evenly and accurately.

Moreover, clean tendon tails can help reduce the likelihood of slippage during the stressing process, which can result in inadequate tension and compromised structural integrity. A well-maintained tendon tail is also easier to inspect and monitor for signs of damage or wear, allowing for timely maintenance and repairs when needed.

In summary, cleaning the tendon tails prior to stressing is a crucial step in ensuring the effectiveness and longevity of post-tensioning systems. By maintaining a clean and contaminant-free connection between the tendon and stressing equipment, the overall performance of the system is enhanced, leading to improved structural integrity and reduced potential for future complications.

Learn more about tendon here:

https://brainly.com/question/29850619

#SPJ11

The chordal idstance are:

(a) 0.04345 inches

(b) 0.054978 inches

(c) 0.102792 inches

(a) The circumference of the dial indicator can be found by multiplying pi by the diameter of the dial:

C =  π  x 1 3/8 inch =  4.345 inches

To find the distance between graduations, divide the circumference by the number of divisions:

Chordal distance = C/100 = 0.04345 inches

(b) Similar to (a), the circumference of the dial indicator can be found as:

C = pi x 1 3/4 inch = 5.4978 inches

Chordal distance = C/100 = 0.054978 inches

(c) Following the same steps, the circumference of the Ames dial indicator is:

C = pi x 1 5/8 inch = 5.1396 inches

Chordal distance = C/50 = 0.102792 inches

Therefore, the chordal distances for the three dial indicators are:

(a) 0.04345 inches

(b) 0.054978 inches

(c) 0.102792 inches

Learn more about  chordal distance:
https://brainly.com/question/7544034
#SPJ1

Coupons are often used to check the effectiveness of CP and are made of the same metal as the structure they are electrically connected to. Coupons are small pieces of metal that are attached to the structure and used as a reference electrode to measure the effectiveness of the CP system.

By monitoring the potential difference between the coupon and the structure, the level of corrosion protection provided by the CP system can be evaluated. Coupons can be buried in the soil or immersed in water along with the structure they are connected to, to monitor the effectiveness of the CP system in different environments. They are also easy to install and remove, making them a convenient tool for monitoring CP. Overall, coupons are an effective and reliable method for evaluating the performance of CP systems in protecting metal structures from corrosion.

Learn more about metal  here:

https://brainly.com/question/18153051

#SPJ11

In this case, a different control strategy, such as an adaptive or robust control, may be needed.

To design a PD controller that reduces the settling time of a system with a dominant-pole damping ratio of 0, we can use the following steps:

Determine the transfer function of the system. Let's assume that the transfer function of the system is given by:

[tex]G(s) = K / (s^2 + 2\zeta wn s + wn^2)[/tex]

where K is the system gain, ζ is the damping ratio, and wn is the natural frequency.

Calculate the settling time of the uncompensated system.

The settling time is the time required for the system response to reach and stay within a specified tolerance band around its final value.

The settling time can be approximated using the following formula:

ts = 4 / (ζwn).

For a system with a damping ratio of 0, the settling time is infinite.

Determine the desired settling time.

Let's assume that we want to reduce the settling time by a factor of 2. This means that the new settling time should be half of the original settling time, which is ts/2 = 2 / (ζwn).

Calculate the desired damping ratio.

The desired damping ratio can be calculated using the following formula:

[tex]\zeta d = -ln(PO)/\sqrt{(pi^2 + ln^2(PO))}[/tex]

where PO is the desired percent overshoot.

Let's assume that we want a percent overshoot of 10%.

This means that PO = 10.

Using this value, we get:

ζd = 0.591.

Calculate the desired natural frequency.

The desired natural frequency can be calculated using the following formula:

[tex]wnd = wn / sqrt(1 - \zeta d^2)[/tex]

Using the values of ζd and wn from step 1, we get:

[tex]wnd = 1.161wn[/tex]

Calculate the PD controller parameters.

The PD controller transfer function is given by:

C(s) = Kp + Kd s.

where Kp is the proportional gain and Kd is the derivative gain.

The PD controller parameters can be calculated using the following formulas:

Kp = (2ζd wnd - 2ζwn) / K

[tex]Kd = (wnd^2 - wn^2 - 2\zeta d wnd Kp) / K[/tex]

where K is the steady-state gain of the system.

Using the values of ζd, ζ, wn, and K from step 1, we get:

Kp = 2.306 / K

Kd = 2.027 / K.

Simulate the compensated system. Simulate the system with the PD controller and compare the transient and steady-state performance with the uncompensated system.

The simulation results will show that the settling time is reduced by a factor of 2, and the percent overshoot is reduced to 10%.

The steady-state error is also reduced.

One potential problem with this design is that the PD controller can introduce high-frequency noise into the system.

This can lead to instability or undesirable oscillations.

To mitigate this problem, a low-pass filter can be added to the PD controller to limit the high-frequency gain.

Another problem is that the PD controller may amplify the high-frequency noise already present in the system, which can degrade the overall performance.

For similar question on control strategy.

https://brainly.com/question/15090029

#SPJ11

Note that the negative sign indicates that the turbine is producing power and that the power output is 73.2 horsepower.

To calculate the power produced by the turbine, we can use the following formula:

Power = (mass flow rate) * (enthalpy change) / (efficiency)

where enthalpy change is the difference between the inlet and outlet enthalpies of the steam.

First, we need to determine the inlet and outlet states of the steam using steam tables or software. At the inlet conditions of 160 psia and 600 °F, the steam has a specific enthalpy of 1354.9 Btu/lb and a specific entropy of 1.8497 Btu/lb·°F. At the outlet pressure of 5 psia, the steam is a mixture of saturated vapor and liquid with a quality of 0.94. From the steam tables, we find the specific enthalpy of the saturated vapor at 5 psia to be 294.7 Btu/lb and the specific enthalpy of the saturated liquid to be 28.3 Btu/lb. Therefore, the outlet enthalpy of the steam is:

h2 = (0.94 * 294.7) + (0.06 * 28.3) = 284.0 Btu/lb

The enthalpy change is then:

Δh = h2 - h1

= 284.0 - 1354.9

= -1070.9 Btu/lb

Using the given mass flow rate of 15 lb/s and isentropic efficiency of 0.82, we can calculate the power produced by the turbine:

Power = (15 lb/s) * (-1070.9 Btu/lb) / (0.82) / 2545 Btu/hp

= -73.2 hp

To know more about horsepower,

https://brainly.com/question/25708791

#SPJ11

To accomplish this task, you can use the cp command with the -i option to prompt before overwriting existing files. The command would be:

cp -i /home/kcole/documents/*.txt /home/mruiz/personal/

This will copy all files with a .txt extension from the /home/kcole/documents directory to the /home/mruiz/personal directory and prompt before overwriting any existing files in the destination directory.

To learn more about existing click on the link below:

brainly.com/question/15102746

#SPJ11

The type of loading that is designed to spread a load evenly across the surface is called "distributed loading."

In this type of loading, the load is spread out over a larger area, which helps to reduce the pressure on any one point of the surface. This is often achieved by using a material that is flexible or deformable, such as a foam or rubber mat, or by designing the surface itself to have a certain level of flexibility or give. Distributed loading is commonly used in a variety of applications, including flooring, where it helps to prevent damage to the surface and improve overall durability. It is also used in engineering and construction projects to distribute weight across large structures and reduce stress on individual components. Overall, distributed loading is an effective way to ensure that loads are spread evenly across a surface, helping to improve performance, durability, and safety.

learn more about surface here:

https://brainly.com/question/7690333

#SPJ11

If you go twice as fast, your stopping distance will increase by a factor of four. This is because stopping distance is directly proportional to the square of the speed. In other words, if you double your speed, your stopping distance will increase by a factor of four. This is a critical concept to understand for anyone who is operating a vehicle, whether it's a car, truck, or motorcycle.

Stopping distance refers to the total distance that a vehicle travels from the moment the driver applies the brakes until the vehicle comes to a complete stop. It is made up of two parts: the thinking distance and the braking distance. The thinking distance is the distance that the vehicle travels while the driver is reacting to the need to stop. The braking distance is the distance that the vehicle travels while the brakes are being applied.

In order to stay safe on the road, it's important to understand how speed affects stopping distance. If you are driving at a high speed, your stopping distance will be much greater than if you are driving at a lower speed. This means that it will take you longer to come to a complete stop, and you will need to be more cautious when driving in situations where you may need to stop suddenly. By keeping this in mind and driving at a safe and appropriate speed, you can help to prevent accidents and keep yourself and others safe on the road.

Learn more about distance here:

https://brainly.com/question/13034462

#SPJ11

The concrete cover refers to the distance between the edge of the concrete and the embedded elements, such as the wedge cavity area of the anchor. This distance is crucial in ensuring the structural integrity, durability, and protection of the reinforcement within the concrete.

The minimum required distance for the concrete cover varies depending on factors such as the type of anchor, environmental conditions, and load requirements. Typically, the concrete cover should be large enough to provide protection against corrosion and damage to the embedded anchor, while also ensuring the effective transfer of forces between the anchor and the surrounding concrete.

For wedge anchors, the minimum concrete cover is usually specified by the manufacturer and is determined based on testing and evaluation of the anchor's performance in various concrete conditions. The concrete cover requirements may also be influenced by building codes and engineering design specifications.

In general, a minimum concrete cover of 1.5 to 2 times the anchor diameter is recommended for wedge anchors to ensure proper functioning and long-term durability. However, it is essential to consult the manufacturer's guidelines and relevant building codes to determine the appropriate concrete cover for the specific application and anchor type.

Learn more about concrete here:

https://brainly.com/question/28903866

#SPJ11

To generate random observations from a uniform distribution, the analyst needs to know the range of values that the distribution should cover.

This can be defined by specifying the minimum and maximum values of the distribution. For example, if the analyst wants to generate random observations from a uniform distribution between 0 and 1, they would need to specify these values in order to generate the desired distribution. Additionally, the analyst would need to use a random number generator that is capable of generating values uniformly between the specified range.

Learn more about random observations: https://brainly.com/question/28876451

#SPJ11

When the Si diodes are turning on at 0. 7V, it should be noted that the value of VB, V, I, and ID2 will be -0.7 volt, 0 volt, 0.86mA and 2ma respectively.

A two-terminal electrical element, called a diode, primarily allows current to flow in one direction. It has low resistance when conducting and strong resistance against the other direction.

It should be noted that a diode components may be applied for many uses, including rectification, voltage limitation, signal modulation, signal blending, switching, demodulation, oscillation, and regulating.

Based on the calculation, when the Si diodes are turning on at 0. 7V, it should be noted that the value of VB, V, I, and ID2 will be -0.7 volt, 0 volt, 0.86mA and 2ma respectively.

Learn more about diode on

https://brainly.com/question/24182272

#SPJ4

A network protocol is a set of rules that governs how communications are conducted across a network. In order for devices to communicate with each other on the network, they must all use the same network protocol.

The term that fits this definition is "network protocol." A network protocol is a set of rules and standards that dictate how devices communicate with each other over a network. This includes guidelines for data formatting, addressing, and transmission methods. In order for devices to communicate effectively on a network, they must all use the same network protocol. This ensures that data is transmitted correctly and that devices can understand and interpret the information being sent. Some examples of network protocols include TCP/IP, HTTP, and FTP. Without network protocols, communication on a network would be chaotic and unreliable.

learn more about network protocol here:

https://brainly.com/question/13327017

#SPJ11

A cylindrical recess is a small opening that is usually created around a hole. The main purpose of this recess is to receive a bolt head or nut. The cylindrical shape is ideal for accommodating a bolt head or nut, providing a secure fit that will help keep the bolt or nut in place.

When a bolt is inserted into the cylindrical recess, it is important that it is properly tightened. This will ensure that the bolt is secure and will not come loose over time. The recess also helps to protect the bolt from damage, as it provides a barrier between the bolt and any other parts that may come into contact with it. In addition to providing a secure fit for the bolt or nut, a cylindrical recess can also help to improve the overall appearance of a piece of equipment or machinery. This is because the recess allows the bolt head or nut to sit flush with the surface of the equipment or machinery, creating a sleek and streamlined look. Overall, a cylindrical recess is an important feature that is commonly found in many pieces of equipment and machinery. By providing a secure fit for bolts and nuts, and by improving the overall appearance of the equipment or machinery, the cylindrical recess plays an important role in ensuring that these items function properly and look great.

Learn more about equipment here-

https://brainly.com/question/30453915

#SPJ11

The in-plane principal strains are ε_1 = 1110([tex]10^{-6}[/tex]) and ε_2 = 210([tex]10^{-6}[/tex]).

To establish the in-plane principal strains using the readings from a 45-degree strain rosette, we can use the following equations:

ε_x = (ε_a + ε_b)/2 + (ε_a - ε_b)/2 cos(2θ) + ε_c sin(2θ)

ε_y = (ε_a + ε_b)/2 - (ε_a - ε_b)/2 cos(2θ) - ε_c sin(2θ)

where ε_a, ε_b, and ε_c are the strain readings from the rosette for the three gauges at angles of 0, 90, and 45 degrees, respectively.

θ is the angle between the x-axis and the line passing through the gauge with ε_a.

Here, the strain readings are given as:

ε_a = 800([tex]10^{-6}[/tex])

ε_b = 520([tex]10^{-6}[/tex])

ε_c = 450([tex]10^{-6}[/tex])

Substituting these values into the above equations, we get:

ε_x = (800 + 520)/2 + (800 - 520)/2 cos(2(45°)) + 450 sin(2(45°))

= 660 + 140 cos(90°) + 450 sin(90°)

= 660 + 0 + 450

= 1110([tex]10^{-6}[/tex])

ε_y = (800 + 520)/2 - (800 - 520)/2 cos(2(45°)) - 450 sin(2(45°))

= 660 - 140 cos(90°) - 450 sin(90°)

= 660 - 0 - 450

= 210 ([tex]10^{-6}[/tex])

Therefore, the in-plane principal strains are ε_1 = 1110([tex]10^{-6}[/tex]) and ε_2 = 210([tex]10^{-6}[/tex])).

Learn more about in-plane principal strains at brainly.com/question/31387382

#SPJ4

Technician A is correct. When the base of a PNP transistor is connected to ground, the transistor is turned off. This is because the base-emitter junction in a PNP transistor is forward-biased when the base is more negative than the emitter.

Technician B's statement is partially correct but is missing some important details. When the base of an NPN transistor has a positive voltage applied to it, the transistor can turn on, but it depends on the voltage level and the current limiting resistor connected to the base.

When the voltage applied to the base is sufficient to forward-bias the base-emitter junction, current flows through the transistor, and it turns on. However, if the voltage is too low or there is no current limiting resistor, the transistor may not turn on fully, or it may be damaged.
For more questions on transistor

https://brainly.com/question/1426190

SPJ11

E. All of the above can define the application architecture for an information system.

The implementation technology for software, the user interface technology, the distribution of stored data, and the degree of centralization or distribution all play a role in determining the overall architecture of an information system. The application architecture for an information system is defined by option e. all of the above. It encompasses the implementation technology for in-house software, the user interface technology, the distribution of stored data across a network, and the degree of centralization or distribution of the system.

To learn more about interface technology visit;

https://brainly.com/question/10847702

#SPJ11

Constant Impeller Tip Speed: 98.4 rpm

Constant liquid circulation rate :  62.6 rpm

Dt (diameter of the large reactor tank) = Dl / H/Dt

Dt = 0.4 m / 2.9

Dt ≈ 0.1379 m

H (height of the large reactor) = H/Dt * Dt

H ≈ 2.9 * 0.1379 m

H ≈ 0.4 m

0.5 / 5 = (Dt2 / 0.1379)³

0.1 = (Dt2 / 0.1379)³

[tex]Dt2 = 0.1 * 0.1379^3\\Dt2 = (0.1 * 0.1379)^(^1^/^3^)[/tex]

Dt2 ≈ 0.0631 m

H2 ≈ 2.9 * 0.0631

H2 ≈ 0.1829 m

For constant tip speed, we need to maintain the same tip speed for both reactors:

π * Dl1 * N1 = π * Dl2 * N2

Speed

N2 = (Dl1 * N1) / Dl2

N2 = (0.4 * 45) / 0.1829

N2 ≈ 98.4 rpm

N2 = (0.4² * 45 * 0.0631³) / (0.1829² * 0.1379³)

N2 ≈ 62.6 rpm

Read more on tank reactor here https://brainly.com/question/30695658

#SPJ4

The answer to your question is a) Fillet. A fillet is a curved surface that blends two surfaces together, creating a rounded exterior. It is often used to smooth out sharp edges or corners and is commonly used in design and engineering applications.

The other options, b) Round, c) Taper, and d) Chamfer, do not necessarily create a rounded exterior like a fillet does. A round is a curved edge without a specific purpose of blending surfaces, while a taper is a gradual reduction in size or thickness. A chamfer is a flat edge or beveled surface that is used to reduce the sharpness of a corner or edge. In summary, a rounded exterior blend between surfaces is created with a fillet. This feature is widely used in design and engineering to create a smooth transition between surfaces and to reduce stress concentrations in the material. It is important to consider the dimensions and angles of the fillet, as it can impact the performance and aesthetics of the final product. Fillets can also be customized to suit the specific needs of a project, making them a versatile and valuable tool for designers and engineers.

Learn more about dimensions here-

https://brainly.com/question/29581656

#SPJ11

True. A Newtonian fluid is a type of fluid whose viscosity remains constant at a given temperature, regardless of the applied shear rate.

Newtonian fluids have a constant viscosity at a given temperature, which means they flow at a consistent rate regardless of the applied shear stress. However, the viscosity of polymer melts changes with the rate of shear. At higher rates of shear, the polymer chains in the melt align in the direction of flow and the viscosity decreases, making the melt thinner. This phenomenon is called shear thinning, and it is common in non-Newtonian fluids like polymer melts. Temperature can also affect the viscosity of both Newtonian and non-Newtonian fluids. Generally, as the temperature increases, the viscosity of a fluid decreases. In summary, while the viscosity of Newtonian fluids remains constant at a given temperature, the viscosity of non-Newtonian fluids like polymer melts can vary with the rate of shear and temperature. In contrast, polymer melts typically exhibit non-Newtonian behavior, meaning their viscosity changes with varying shear rates. When subjected to higher shear rates, polymer melts tend to become thinner or less viscous. This decrease in viscosity with increasing shear rate is referred to as shear-thinning behavior, which is common in many complex fluids such as polymer solutions and melts.

Learn more about Newtonian fluid here

https://brainly.com/question/13172381

#SPJ11

The phasor form of the sinusoid –20 cos(4t + 139°) is 20 ∠ is 20 ∠ 319°.

A sinusoid is a periodical waveform that demonstrates a concerted, cyclic oscillation throughout a course of time and is also colloquially referenced to as a sine wave. It can be confiningly specified by the following equational expression: y = A sin(ωt + φ), expressing:

y which stands for the value of the wave at a given time t,

A manifesting the incline of the wave (the prominent peak); and

ω denoting the angular frequency (2π times the frequency in Hertz) of the wave.

The phasor form of the sinusoid –20 cos(4t + 139°) is 20 ∠ is;

= (20 ∠ 180)(1 ∠ 139)

= 20 ∠ 319°.

Learn more about sinusoid on

https://brainly.com/question/29529184

#SPJ4

When calculating box conductor fill, all of the following shall be counted except for the grounding conductor.

This means that you should include current-carrying conductors, devices such as switches and receptacles, and cable clamps when determining the fill capacity of a box. The grounding conductor, however, is not counted in this calculation. When calculating box conductor fill, all of the following shall be counted except for:

1. Conductors that are shorter than 6 inches
2. Grounding conductors
3. Equipment bonding jumpers
4. Conductors for electric signs and outline lighting
5. Conductors for luminaires
6. Conductors for fixtures
7. Conductors for appliances

To learn more about conductor visit;

https://brainly.com/question/18084972

#SPJ11