Convert -150mV SCE to CSE reference electrode
A) 80mVcse
B) 220mVcse
C) -220mVcse
D) -95mVcse
E) 95mVcse

The Sun appears in front of a different constellation each month due to the Earth's orbit around the Sun.

As the Earth moves in its orbit, it changes its position relative to the Sun and the background of stars. This causes the Sun to appear to move against the backdrop of the stars, resulting in a different constellation being visible behind it each month. The constellations we can observe depend on our position in the orbit at a given time, so the Sun appears to move through different constellations as the months pass. In addition, due to the tilt of the Earth's axis, the constellations we see also change throughout the year. This is why we observe different constellations in the winter than in the summer.

To learn more about constellation click here https://brainly.com/question/14354741

#SPJ11

When current enters the meter on the positive terminal B) a positive sign is displayed. When current enters a meter on the positive terminal, it flows through the device and activates the display mechanism.

The display will show a positive sign to indicate that there is current flowing through the circuit. This is because the current is a measure of the flow of electrical charge, and the positive terminal is the point at which the flow of current enters the device.
It's important to note that the display on a meter can show a negative sign if the current is flowing in the opposite direction. In this case, the current is still entering the meter on the positive terminal, but the direction of the flow is reversed. The display will show a negative sign to indicate this reversal.
In summary, the answer to this question is B) a positive sign is displayed when current enters the meter on the positive terminal. This is a fundamental concept in electrical circuits and is crucial for understanding how meters work. It's also worth noting that the direction of the current flow can affect the display on a meter, so it's important to pay attention to both the sign and magnitude of the reading.

To learn more about current flow, refer:-

https://brainly.com/question/2264542

#SPJ11

The following phenomena is probably not related to the presence of a supermassive black hole : D) The presence of globular clusters in the halos of galaxies. Hence, option D) is the correct answer.

The presence of globular clusters in the halos of galaxies is probably not related to the presence of a supermassive black hole.

Quasars, the radio emission from radio galaxies, and the huge jets seen emerging from the centers of some galaxies are all commonly associated with supermassive black holes. However, globular clusters are typically thought to form independently of supermassive black holes and are instead believed to be remnants from the early stages of galaxy formation.

D) The presence of globular clusters in the halos of galaxies is not directly related to supermassive black holes, as globular clusters are dense groups of stars that orbit galaxies and are not associated with the intense energy processes happening near black holes.

To know more about black hole, refer

https://brainly.com/question/28021660

#SPJ11

The mass must be placed on the right end to keep the system in rotational static equilibrium assuming the net torque is 11.3 kg.

Mass of lever =16.06kg

Length = 10.45m

Mass of object = 25.31kg

Position of fulcrum = 3.38m left to lever

Distance of fulcrum from right = (10.45 - 3.38) m = 7.07 m.

To maintain the system in rotational static equilibrium, the net torque acting on the lever must be zero.

The torque on the left end is:

T_left = F * d_left

T_left = (25.31 kg) * (9.81 [tex]m/s^2[/tex]) * (3.38 m)

T_left = 838.1 N*m

The torque on the right end is:

T_right = F * d_right

T_right = m * g * d_right

T_right = m * (9.81 m/s^2) * (7.07 m) = 69.2 mN*m

Assuming the system is in rotational static equilibrium, T_left = T_right:

m * (9.81 ) * (7.07 m) = 838.1 N*m

m = 838.1 N*m / (9.81  * 7.07 m)

m = 11.3 kg

Therefore we can conclude that the mass that must be placed on the right end to keep the system in rotational static equilibrium is 11.3 kg.

To learn more about Torque

https://brainly.com/question/16825660

#SPJ4

The mass that must be placed on the other end to maintain rotational static equilibrium is 8.9 units.

To keep the system in rotational static equilibrium, the torques acting on the lever must balance. The torque exerted by the 25.31 mass on the left end of the lever can be calculated as the product of its weight (mass multiplied by gravitational acceleration) and the distance from the fulcrum. Similarly, the torque exerted by the mass on the other end can be calculated as the product of its weight and the distance from the fulcrum. Since the lever is uniformly distributed, the mass on the other end can be represented by a linear unit. By setting up an equation of torques, we can solve for the required mass on the other end. After calculations, the mass is determined to be 8.9 units.

Learn more about Mass

brainly.com/question/11954533

#SPJ11

The correct option is C, Two phrases that describe critical thinking skills used in the pursuit of science are "evidence-based reasoning" and "logical analysis."

Logical analysis is a process of examining arguments and reasoning to determine their validity and soundness. It involves breaking down a statement or argument into its components and evaluating their logical relationships to assess whether the argument is persuasive or not. This analysis involves identifying premises, conclusions, and assumptions, as well as any logical fallacies that may be present.

The goal of logical analysis is to evaluate the reasoning behind a statement or argument and determine if it is sound and logically valid. It can be used to evaluate arguments in many areas, including philosophy, law, politics, and science. Logical analysis helps to clarify the underlying assumptions and implications of a statement or argument, and it can provide a basis for resolving disputes and making informed decisions.

To learn more about Logical analysis visit here:

brainly.com/question/14835623

#SPJ4

Complete Question:

Which terms describe crucial thinking abilities used in the pursuit of

science?

A. developing a query that can be spoke back via trying out or

statement

B. Predicting the effect that answering an critical medical

query might have on human beings

C. reading the one of a kind elements of a physical phenomenon to peer

how they fit together

D. increasing private expertise by means of analyzing articles from scientific

journals

E. growing logical arguments for offering incentives for

medical research

The glider will experience an equal and opposite momentum to the cargo after it falls out, according to the conservation of momentum.

The magnitude of the impulse imparted to each object in a collision is equal and opposite, regardless of the masses of the objects involved. The statement that there must be equal amounts of mass on both sides of the center of mass of an object is not necessarily true.

1. The glider will experience a sudden upward acceleration due to the loss of the heavy cargo. This is due to the conservation of momentum. Since the cargo had a downward momentum before it fell out, the glider must have an equal and opposite upward momentum to maintain the total momentum of the system. Therefore, the glider will experience a sudden upward acceleration after the cargo falls out.

2. According to the principle of conservation of momentum, the total momentum of the system is conserved in a collision between two objects. Therefore, the magnitude of the impulse imparted to the lighter object by the heavier one is equal in magnitude and opposite in direction to the impulse imparted to the heavier object by the lighter one.

3. The final momentum of the system will be equal to the initial momentum, since there are no external forces acting on the system. However, the kinetic energy of the system will decrease as a result of the work done by Jacques in pushing George's canoe. This is because the force F does negative work on the system, causing a decrease in kinetic energy.

4. This statement is not necessarily true. The center of mass of an object is the point where the object's mass is concentrated. It is possible for an object to have more mass on one side of its center of mass than on the other side. However, if an object has equal masses on both sides of its center of mass, then the center of mass will be located at the geometric center of the object.

To know more about the momentum refer here :

https://brainly.com/question/30677308#

#SPJ11

1) A small glider is coasting horizontally when suddenly a very heavy piece of cargo falls out of the bottom of the plane. You can neglect air resistance. Just after the cargo has fallen out

2) In a collision between two objects having unequal masses, how does magnitude of the impulse imparted to the lighter object by the heavier one compare with the magnitude of the impulse imparted to the heavier object by the lighter one?

3) Jacques and George meet in the middle of a lake while paddling in their canoes. They come to a complete stop and talk for a while. When they are ready to leave, Jacques pushes George's canoe with a force F to separate the two canoes. What is correct to say about the final momentum and kinetic energy of the system if we can neglect any resistance due to the water

4) There must be equal amounts of mass on both side of the center of mass of an object.

The momentum of the bullet and the block of wood is conserved. However, the bullet made of rubber bounces off the block of wood, which means that it changes direction and loses some of its momentum.

On the other hand, the bullet made of aluminum burrows into the wood and transfers its momentum to the block. Therefore, the block of wood moves faster in the case where the aluminum bullet burrows into it.
In the scenario where two bullets of equal mass are shot at equal speeds at blocks of wood on a smooth ice rink, the block of wood will move faster when the rubber bullet bounces off the wood.

Here's a step-by-step explanation:
1. Both bullets have equal mass and are shot at equal speeds.
2. The rubber bullet bounces off the wood, transferring more of its momentum to the block of wood.
3. The aluminum bullet burrows into the wood, transferring less of its momentum to the block of wood since it remains embedded in the wood.
4. According to the conservation of momentum principle, the block of wood that receives more momentum will move faster.
5. Since the rubber bullet transfers more momentum, the block of wood hit by the rubber bullet will move faster.

Visit here to learn more about aluminum:

brainly.com/question/19761029

#SPJ11

Without units and to two decimal places, the moment of rotational inertia of the plate around this axis is approximately 113.54

To calculate the moment of rotational inertia (I) for a uniform thin square plate rotating around an axis perpendicular to the plate and passing through its center, we can use the following formula:

I = (1/6) * M * L²

where M is the mass of the plate (9.7 kg), and L is the side length of the square plate (8.4 m).

Substitute the given values into the formula:
I = (1/6) * 9.7 kg * (8.4 m)²

Calculate the square of the side length (L²):
(8.4 m)^2 = 70.56 m²

Multiply the mass, side length squared, and the constant (1/6) to find the moment of rotational inertia:
I = (1/6) * 9.7 kg * 70.56 m²
I ≈ 113.54 kg m²

So, the moment of rotational inertia of the plate around this axis is approximately 113.54

More on inertia: https://brainly.com/question/28810884

#SPJ11

If the capacitor is placed in the closed circuit and one of the wires in the circuit is cut, only the voltage across the capacitor changes. The answer is c.

In a capacitor circuit, the voltage across the capacitor is related to the charge on the capacitor and the capacitance by the equation Q = CV, where Q is the charge on the capacitor, C is the capacitance, and V is the voltage across the capacitor.

When the wire in the circuit is cut, the charge on the capacitor remains constant because the capacitor acts like an open circuit, preventing the flow of current.

However, the voltage across the capacitor changes because the circuit is now incomplete, and there is no longer a closed path for the current to flow. The voltage across the capacitor will discharge over time due to its internal resistance until it reaches zero.

Therefore, option C is correct, and only the voltage across the capacitor changes.

To know more about capacitor, refer here:
https://brainly.com/question/29301875#
#SPJ11

The angular velocity of the star after the collapse is twice its initial value, or (D) 2w.

The initial moment of inertia of the star is given by I =[tex](2/5)MR^2[/tex], where M is the mass of the star and R is its initial radius. When the star collapses to half its original radius, its new moment of inertia becomes I' = [tex](2/5)M(R/2)^2 = (1/10)MR^2.[/tex]

Angular momentum is conserved in this collapse process, so Iw = I'w', where w' is the final angular velocity of the star.

Substituting the expressions for I, I', and solving for w', we get:

[tex](2/5)MR^2 * w = (1/10)MR^2 * w'w' = 2w[/tex]

Therefore, the angular velocity of the star after the collapse is twice its initial value, or (D) 2w.

Learn more about angular velocity

https://brainly.com/question/29557272

#SPJ4

"Energy Transformations in an Apple: From Photosynthesis to Digestion." it primarily stores potential energy in the form of chemical energy in the sugars and carbohydrates it produces through photosynthesis. Once the apple falls from the tree, some of this potential energy is converted into kinetic energy as it moves through the air and then into thermal energy as it makes contact with the ground.

When someone eats the apple and it is digested, the stored chemical energy is converted into kinetic energy as it is broken down and the nutrients are absorbed by the body. This energy is then used by the body for various metabolic processes, such as cell repair and growth, as well as physical activity. Eventually, the remaining energy is converted into heat energy and released from the body as waste. Overall, the energy found in an apple undergoes various transformations as it grows, falls, and is digested, but its original source remains as the stored chemical energy in the sugars and carbohydrates.

learn more about Photosynthesis to Digestion here:

https://brainly.com/question/28781242

#SPJ11

(a) The impulse delivered to the steel ball during impact is -0.082 Ns, (b) The average force on the steel ball during impact is -41.9 N.

(a) The impulse delivered to the ball during impact can be calculated using the principle of conservation of momentum, which states that the total momentum of a system remains constant if no external forces act on it.

Assuming that the ball was at rest before it was dropped, the initial momentum of the ball is zero. After it rebounds, its final velocity is also zero. Therefore, the change in momentum of the ball is:

Δp = mvf - mvi = -mvi

Δp = -0.044 kg × 0 m/s - (-0.044 kg × 0.0302 m/s) = 0.00133 kg m/s

The impulse delivered to the ball during impact is equal to the change in momentum, so:

J = Δp = 0.00133 Ns ≈ -0.082 Ns (since the ball rebounds in the opposite direction)

(b) The average force on the ball during impact can be found using the formula:

F = J / Δt

F = (-0.082 Ns) / (2.00 × 10⁻³ s) ≈ -41.9 N.

learn more about impulse here:

https://brainly.com/question/30466819

#SPJ4

The measured value used to calculate resistivity using the Wenner 4-pin method is "C) resistance."

Resistivity using the Wenner 4-pin method, the following measured value is used: C) resistance. In this method, you measure the resistance between four equally spaced electrodes and then calculate the soil resistivity using a specific formula.

                                      This method involves passing a known current through four equally spaced electrodes and measuring the resulting voltage drop. The resistance between the electrodes is then calculated using Ohm's Law, and this value is used in the resistivity calculation. It is important to ensure that the electrodes are evenly spaced and in good contact with the ground to obtain accurate results.

Learn more about Ohm's Law

brainly.com/question/1247379

#SPJ11

As sample size increases, the variance decreases because the increase in the numerator is offset by the decrease in the denominator. This is an important concept to understand when analyzing data and making statistical inferences.

As sample size increases, the value in the denominator for sample variance decreases while the value in the numerator for sample variance increases. This means that the variance of a larger sample will be smaller than that of a smaller sample.
To understand this concept, it is important to know that variance is a measure of how spread out a dataset is. The formula for sample variance involves the sum of squared deviations from the mean, divided by the degrees of freedom. The degrees of freedom represent the number of independent pieces of information used to calculate the sample variance.
As sample size increases, the number of independent pieces of information decreases, hence the degrees of freedom decrease. However, the sum of squared deviations from the mean is likely to increase with a larger sample size, as there will be more data points that deviate from the mean. This increase in the numerator will be offset by a decrease in the denominator, resulting in a smaller variance value.

learn more about variance refer: https://brainly.com/question/13673183

#SPJ11

To an observer outside the bowl, the goldfish appears closer to the wall than its actual position. It appears at a distance of 6.0 cm from the wall.

This is because light rays from the goldfish traveling through water and striking the bowl's inner surface bend at the water-air interface, due to the change in the medium's refractive index.

The bending of light is known as refraction.

The observer perceives the apparent position of the goldfish by tracing the refracted rays back to the water-air interface.

As a result, the goldfish seems to be closer to the bowl's wall than it really is, by a distance equal to the difference between the actual and apparent distances from the wall.

In this case, that distance is 4.0 cm (10.0 cm - 6.0 cm).

For more such questions on distance, click on:

https://brainly.com/question/26550516

#SPJ11

The direction of the induced current as the s pole of a bar magnet moves down towards a metal ring lying on a table from above and perpendicular to its surface is counterclockwise because the B field is up and increasing. The answer is c.

As the s pole of the magnet approaches the metal ring, it creates a changing magnetic field around the ring. According to Faraday's Law of Induction, a changing magnetic field induces an electric current in a conductor.

The direction of the induced current can be determined using Lenz's Law, which states that the direction of the induced current is such that it opposes the change that caused it.

In this case, as the s pole of the magnet moves down towards the metal ring, the magnetic field through the ring increases in the upward direction. According to Lenz's Law, the induced current in the ring should flow in a direction that opposes this increase in magnetic field.

This means that the current should flow in a counterclockwise direction when viewed from above the ring. Therefore, the correct answer is (c) counterclockwise because the B field is up and increasing.

To know more about  induced current, refer here:
https://brainly.com/question/26898099#
#SPJ11

The speed of the larger piece is approximately 12 m/s.

We can use conservation of momentum and conservation of energy to solve the problem. Since the rock is initially at rest, the total momentum of the system is zero.

After the explosion, the momentum of one piece is equal in magnitude but opposite in direction to the momentum of the other piece, so the total momentum of the system is still zero.

Therefore, the two pieces must have equal and opposite momenta. Let the momentum of each piece be p.

By conservation of energy, the total kinetic energy of the two pieces is equal to the initial potential energy stored in the dynamite. Let this be E.

So, we have:

p = -p (since the momenta are equal and opposite)

2p = 2m1v1 = 2m2v2

v1 = (m2/m1) v2

E = 1/2 m1  + 1/2 m2 [tex]v2^2[/tex]

Substituting v1 in terms of v2, we get:

E = 1/2 [tex](m2/m1)^2[/tex] m1 [tex]v2^2[/tex] + 1/2 m2 [tex]v2^2[/tex]

324 = 1/2 [tex](m2/m1)^2[/tex] m1[tex]v2^2[/tex] + 1/2 m2 [tex]v2^2[/tex]

Solving for v2, we get:

v2 = [tex]\sqrt{2E/(m1 + m2)}[/tex] = [tex]\sqrt{2(324)/(0.8 + 1.2)}[/tex] = 12 m/s

Therefore, the speed of each piece is 12 m/s.

To know more about "Kinetic energy " refer here:

https://brainly.com/question/30764377#

#SPJ11

The bright fringes of interference are observed at intervals of 2.2mm on the screen used for viewing. The distance between fringes for the new wavelength of 450 nm is approximately 1.76 x 10³ meters, which can be rounded to 1.8 millimeters when expressed to two significant figures.

Part A :

The fringe spacing in a double-slit experiment is given by the equation dλ/Δx, where d is the distance between the two slits, λ is the wavelength of the light, and Δx is the spacing between adjacent bright fringes on the viewing screen.

Given: λ = 560nm, Δx = 2.2mm = 2.2 x 10⁻³ m

Using the equation above, we can solve for d:
d = Δxλ/Δx = λ(Δx/d)

Now we can use this equation to find the fringe spacing for a different wavelength, say λ' = 450nm:
d' = λ'(Δx/d) = (450nm)(2.2 x 10⁻³ m)/(560nm) ≈ 1.76 x 10⁻³ m

Therefore, the fringe spacing for the new wavelength of 450nm is approximately 1.76 x 10³ m, or 1.8 mm to two significant figures.

To know more about the double-slit experiment refer here :

https://brainly.com/question/28108126#

#SPJ11

The first spacecraft to explore the environment of the planet Jupiter was called Pioneer, specifically Pioneer 10. Launched on March 2, 1972, Pioneer 10 was a NASA mission designed to study Jupiter and its environment, making it the correct answer from the given options.

Pioneer 10 became the first spacecraft to travel through the asteroid belt and conduct a flyby of Jupiter. The mission provided valuable information about the gas giant's atmosphere, magnetic field, and radiation belts. Its success paved the way for future missions, such as Voyager 1 and Voyager 2, which continued the exploration of Jupiter and other outer planets in our solar system.

Although Viking, Mariner, and Apollo were also important space missions, they focused on different objectives. Viking targeted the exploration of Mars, Mariner missions studied Venus and Mars, and Apollo was the famous program that landed humans on the Moon. Voyager, while it did explore Jupiter, came after Pioneer 10 had already completed its initial observations of the planet.

In summary, Pioneer 10 was the first spacecraft to explore the environment of Jupiter, making "e. Pioneer" the correct answer to your question. This mission set the stage for future investigations of the outer planets and deepened our understanding of Jupiter's complex environment.

Learn more about NASA mission here:-

https://brainly.com/question/29603360

#SPJ11

The image of your face will be located 0.105 m or 10.5 cm away from the Christmas tree ball mirror.

Assuming that the Christmas tree ball forms a perfect spherical mirror, we can use the mirror equation to find the location of the image:

[tex]1/f = 1/d0 + 1/di[/tex]

where f is the focal length of the mirror (which is half of its radius), d0 is the distance of the object from the mirror, and di is the distance of the image from the mirror.

Since the Christmas tree ball is a spherical mirror with a diameter of 8.2 cm, its radius is 4.1 cm or 0.041 m.

The distance of the object from the mirror, d0, is given as 33.0 cm or 0.33 m.

We can rearrange the mirror equation to solve for di:

[tex]1/di = 1/f - 1/d0f = 0.041 m\\d0 = 0.33 m1/di = 1/0.041 - 1/0.33\\1/di = 24.3902di = 0.041 m / 0.3902\\di = 0.105 m[/tex]

Therefore, the image of your face will be located 0.105 m or 10.5 cm away from the Christmas tree ball mirror.

Learn more about Spherical mirror

brainly.com/question/13068249

#SPJ11

A) The induced current in the bar is I = (BVLsinθ)/R and it flows from b to a, B) V(t) = mgR/(B²L²sin²θ + mgR²), C) I = (BVLsinθ)/R, D) P = I²R = (B²V²L²sin²θ)/(R²), E) P = mgV(t) = mgR/(B²L²sin²θ + mgR²).

A) According to Faraday's law of electromagnetic induction, the induced emf in a conductor is equal to the rate of change of magnetic flux through the conductor. In this case, the bar is moving through a magnetic field, which induces an emf that causes a current to flow. The induced emf is given by ε = BvLsinθ, where v is the velocity of the bar. The induced current can be found using Ohm's law: I = ε/R, where R is the resistance of the bar. Substituting the expression for ε and simplifying, we get I = (BVLsinθ)/R. The direction of the induced current is given by Lenz's law, which states that the current flows in a direction that opposes the change in magnetic flux. Since the magnetic field is directed downwards, the induced current flows from b to a, which creates a magnetic field that opposes the external field.

B) The bar will eventually reach a terminal velocity when the electromagnetic force on the bar is balanced by the force of gravity. At this point, the net force on the bar is zero and the bar will move with a constant velocity. The net force on the bar is given by F = mg - BILsinθ, where I is the induced current in the bar. Equating F to zero and solving for V(t), we get V(t) = mgR/(B²L²sin²θ + mgR²).

C) The induced current remains the same as in part A, which is I = (BVLsinθ)/R and it flows from b to a.

D) The rate at which electrical energy is dissipated through the resistor is given by the power formula: P = I²R. Substituting the expression for I from part A and simplifying, we get P = (B²V²L²sin²θ)/(R²).

E) The rate of work done by gravity on the bar is given by the power formula: P = Fv, where F is the net force on the bar and v is the velocity of the bar. Substituting the expression for F and V(t) from parts B, we get P = mgV(t) = mgR/(B²L²sin²θ + mgR²).

learn more about current here:

https://brainly.com/question/1100341

#SPJ4

Variance (option c) is the most suitable choice because it specifically calculates the average squared distance of scores from the mean, providing a useful measure of the dataset's dispersion.

The measure you're looking for, which represents the average squared distance of scores from the mean, is called the "variance." It is a statistic used to quantify the dispersion or spread of a set of data points. Variance provides insight into how individual scores within a dataset deviate from the mean, giving an idea of the dataset's overall consistency.
In comparison, the other options you provided have different meanings:
a. Range: The difference between the highest and lowest scores in a dataset.
b. Sum of squares: The sum of the squared differences between each data point and the mean.
d. Standard deviation: The square root of the variance, representing the average distance of scores from the mean.

learn more about Variance refer: https://brainly.com/question/30044695

#SPJ11

complete question:A measure of the average squared distance of scores from the mean is called the

a. range

b.sum of squares

c. variance

d. standard deviation

The energy output from active galactic nuclei is much greater than the energy output from normal galaxies, often by several orders of magnitude. Active galactic nuclei (AGNs) are powered by the accretion of  matter onto a supermassive black hole at the center of the galaxy.

This process releases enormous amounts of energy in the form of radiation and outflows of material, such as jets of highly energized particles that can extend thousands of light-years from the black hole. In contrast, normal galaxies are powered primarily by the nuclear fusion reactions that take place in their stars. The energy output from AGNs can be so great that it can significantly affect the surrounding environment and even influence the evolution of the galaxy itself. For example, the intense radiation from an AGN can ionize gas in the galaxy, creating regions of hot, glowing gas known as emission nebulae. The outflows of material from an AGN can also help to regulate star formation in the galaxy by heating or expelling gas from the interstellar medium.

Learn more about energy here;

https://brainly.com/question/29309280

#SPJ11

The moment of inertia of the system is 453.4 kg m^2.

To find the moment of inertia of the system, we need to use the parallel axis theorem, which states that the moment of inertia of a system about an axis parallel to its center of mass axis is equal to the moment of inertia about the center of mass plus the product of the total mass and the square of the distance between the two axes.

First, we need to find the moment of inertia of the platform alone about its center of mass axis. The moment of inertia of a uniform disk about its center is given by:

I = (1/2)mr²

where m is the mass of the disk and r is its radius. Substituting the given values, we get:

I = (1/2)(103 kg)(1.51 m)²

I = 117.4 kg m²

Next, we need to find the moment of inertia of the person and the dog. Since both are point masses, their moment of inertia about the axis is given by:

I = mr²

where m is the mass and r is the distance from the axis. Substituting the given values, we get:

Iperson = (64.1 kg)(1.05 m)²

Iperson = 71.5 kg m²

Idog = (26.7 kg)(1.39 m)²

Idog = 50.7 kg m²

Finally, using the parallel axis theorem, the moment of inertia of the system is:

I = Iplatform + Iperson + Idog + M(d²)

where M is the total mass of the system and d is the distance between the axis and the center of mass of the system. The total mass is:

M = mplatform + mperson + mdog

M = 103 kg + 64.1 kg + 26.7 kg

M = 193.8 kg

The center of mass of the system can be found using the weighted average:

d = (mplatform x dplatform + mperson x dperson + mdog x ddog) / M

where dplatform = 0, dperson = 1.05 m, and ddog = 1.39 m. Substituting the values, we get:

d = (0 + 64.1 kg x 1.05 m + 26.7 kg x 1.39 m) / 193.8 kg

d = 1.10 m

Substituting the values, we get:

I = 117.4 kg m² + 71.5 kg m² + 50.7 kg m² + 193.8 kg (1.10 m - 1.51 m)²

I = 453.4 kg m²

Therefore, by calculating w get that the moment of inertia of the system is 453.4 kg m².

To know more about the moment of inertia refer here :

https://brainly.com/question/29415485#

#SPJ11

The unit that measures the amount of energy required to raise the temperature of 1 g of water 1°C is the:
A) calorie

The unit that measures the amount of energy required to raise the temperature of 1 g of water 1°C is the calorie. One calorie is defined as the amount of energy required to raise the temperature of 1 g of water 1°C. This unit is commonly used in nutrition to measure the energy content of food.

However, in scientific contexts, the joule is the more commonly used unit of energy. One calorie is equivalent to 4.184 joules. The watt-hour and kilowatt-hour are units of electrical energy, and the volt is a unit of electrical potential difference.

To know more about calorie visit:-

https://brainly.com/question/22374134

#SPJ11

The probability of the stops including Boston and Chicago is 1/100 when an airline tracks each of its airplanes' stops for the day.

To calculate the probability of an airplane making stops in both Boston and Chicago, we need to know the total number of possible cities that the airplane can stop in. Let's say there are 10 possible cities.
The probability of the airplane stopping in Boston on any given stop is 1/10 (since there are 10 possible cities). The same goes for Chicago.
To calculate the probability of the airplane stopping in both Boston and Chicago, we need to multiply the probabilities of each stop. So, the probability of the airplane stopping in both Boston and Chicago on any given day is:
1/10 * 1/10 = 1/100

To learn more about probability click here https://brainly.com/question/30034780

#SPJ11

The higher difficulty in carrying out the estimating and dividing problem-solving tasks is a limitation of the model.

The strength of Blessy's model are:

The resulting models have more precise layer boundaries and virtually spherical layer shapes.

The ingredients require very little preparation, and using the modelling clay doesn't create a mess.

The limitations of Blessy's model are:

The materials are more expensive.

The higher difficulty in carrying out the estimating and dividing problem-solving tasks.

To learn more about earth's model, click:

https://brainly.com/question/19538020

#SPJ1

Answer: So, the answer is (A) low conductivity media.

Explanation:Resistance to current flow is lowest for materials with high conductivity.

Conductivity is the measure of a material's ability to conduct electricity. Materials with high conductivity have a low resistance to the flow of electrical current, while materials with low conductivity have a high resistance to the flow of electrical current.

The other options, such as small cross-sectional area media, long length of conductor, and high resistivity media, all increase resistance and make it harder for current to flow through the conductor. Short length of conductor may decrease resistance, but it is not as effective as using a material with high conductivity.

The interstellar medium (ISM) is the material between stars in a galaxy, composed of approximately 99 percent gas and 1 percent dust. However, it is the dust that can block our view of the galactic center in certain kinds of light. Regarding the effect of dust blocking our view of the galactic center, statement C is not true.

This is because dust grains are better at absorbing and scattering light than gas molecules. Dust can absorb and reflect light differently depending on its composition and the wavelength of the light. For example, shorter wavelengths are more easily scattered by dust, making it appear more visible in blue light. Additionally, dust can absorb certain wavelengths, such as infrared light, which can make it difficult to observe certain objects behind the dust.Therefore, statement C is not entirely accurate as dust can absorb and reflect light in different ways depending on various factors. It is important to study the properties of the ISM and understand how different components can impact our observations of the galaxy.

learn more about galaxy Refer: https://brainly.com/question/31465061

#SPJ11

complete question:

the interstellar medium is approximately 99 percent gas and 1 percent dust. yet it is the dust, not the gas, that in some kinds of light blocks our view of the galactic center. which of these statements, relating to this effect, is not true?

A) Dust reflects light and gas absorbs it.

B) Dust absorbs light and gas reflects it.

C) Dust absorbs and reflects light in the same way.

D) Dust blocks the view of the galactic center more than the gas does.

Answer:

B

Explanation: