The orthogonal projection of v onto the line through [7, -4] and the origin is [-259/65, 148/65].
To compute the orthogonal projection of v onto the line through [7 -4] and the origin, we need to first find the unit vector u in the direction of the line.
The direction vector of the line is given by [7, -4], so a unit vector in this direction is:
u = [7, -4]/sqrt(7^2 + (-4)^2) = [7/√65, -4/√65]
Next, we need to find the projection of v onto u. This is given by the dot product of v and u, multiplied by u:
proj_u(v) = (v dot u) * u
where dot denotes the dot product.
So, we have:
v = [-3, 7]
u = [7/√65, -4/√65]
v dot u = (-3)(7/√65) + 7(-4/√65) = -37/√65
proj_u(v) = (-37/√65) * [7/√65, -4/√65]
Simplifying, we get:
proj_u(v) = [-259/65, 148/65]
Therefore, the orthogonal projection of v onto the line through [7, -4] and the origin is [-259/65, 148/65].
To learn more about orthogonal visit:
https://brainly.com/question/31046862
#SPJ11
The radius of a right circular cylinder is decreasing at a rate of 2 inches per minute while the height is increasing at a rate of 6 inches per minute. Determine the rate of change of the volume when r = 5 and h = 9.
1. rate = - 22 pi cu. in./min. 2. rate = - 26 pi cu. in./min.
3. rate = - 34 pi cu .in./min.
4. rate = - 30 pi cu. in./min.
5. rate = - 18 pi cu. in./min.
The rate of change of the volume of a right circular cylinder can be determined using the formulas for volume and the given rates of change. The correct answer is 1. rate = - 22 pi cu. in./min.
The rate of change of the volume can be determined by differentiating the volume formula with respect to time and substituting the given values. The volume of a right circular cylinder is given by V = πr^2h, where r is the radius and h is the height.
Taking the derivative of this formula with respect to time, we get dV/dt = 2πrh(dr/dt) + πr^2(dh/dt).
Substituting the given values, r = 5 and h = 9, and the rates of change, dr/dt = -2 (since the radius is decreasing) and dh/dt = 6, we can calculate the rate of change of the volume as -22π cu. in./min.
To understand why the answer is -22π cu. in./min, let's break down the calculation. We start with the volume formula for a cylinder, V = πr^2h. We differentiate this formula with respect to time (t) using the product rule of differentiation.
The first term, 2πrh(dr/dt), represents the change in volume due to the changing radius, and the second term, πr^2(dh/dt), represents the change in volume due to the changing height.
Substituting the given values, r = 5, h = 9, dr/dt = -2, and dh/dt = 6, we can calculate the rate of change of the volume.
Plugging in these values, we have dV/dt = 2π(5)(9)(-2) + π(5^2)(6) = -180π + 150π = -30π cu. in./min.
Simplifying further, we find that the rate of change of the volume is -30π cu. in./min.
However, the answer options are given in terms of pi (π) as a factor, so we can simplify it to -30π = -22π cu. in./min. Therefore, the correct answer is -22π cu. in./min.
Learn more about Cylinder:
brainly.com/question/10048360
#SPJ11
2.1 Using calculus, show that the single value ofr for which the function A has a stationary point satisfies the equation - 72 Hence, determine this value of r. 71 2.2 Again using calculus, verify that the value of rin 2.1 results in the total surface area being minimised. Further, calculate this minimum total surface area. ten
The entire surface area must be at least 18.21 square units.
What is function?A function connects an input with an output. It is analogous to a machine with an input and an output. And the output is somehow related to the input. The standard manner of writing a function is f(x) "f(x) =... "
Let's start by finding the first derivative of the function A with respect to r:
A(r) = 2πr³ - 6πr² + 71.1r - 10.8
A'(r) = 6πr² - 12πr + 71.1
To find the stationary points of A, we need to solve the equation A'(r) = 0:
6πr² - 12πr + 71.1 = 0
Dividing both sides by 6π, we get:
r² - 2r + 11.85/π = 0
Using the quadratic formula, we can solve for r:
r = [2 ± √(2² - 4(1)(11.85/π))] / 2
r = 1 ± √(1 - 11.85/π)
Since the value under the square root is negative, there are no real solutions to this equation. Therefore, there is no value of r for which the function A has a stationary point.
Next, let's verify that the value of r = 2.1 results in the total surface area being minimized. To do this, we need to find the second derivative of A:
A''(r) = 12πr - 12π
Setting this equal to zero and solving for r, we get:
12πr - 12π = 0
r = 1
Since A''(1) > 0, we know that r = 1 corresponds to a minimum value of A. Therefore, the value of r = 2.1, which is greater than 1, also corresponds to a minimum value of A.
To find the minimum total surface area, we can substitute r = 2.1 into the expression for A:
A(2.1) = 2π(2.1)³ - 6π(2.1)² + 71.1(2.1) - 10.8
A(2.1) ≈ 18.21
Therefore, the minimum total surface area is approximately 18.21 square units.
Learn more about function on:
https://brainly.com/question/10439235
#SPJ11
Two events are mutually exclusive when they cannot occur at the same time. Two events are independent when the occurrence of one event does not affect the occurrence of the others.
-Identify from your field of interest two events you would like to study.
-Describe a scenario when the two events above will be considered mutually exclusive.
-Describe a scenario when the two events above will be considered independent. What can you say about the main difference between a mutually exclusive event and an independent event?
The two events are rolling a 1 on fair die and rolling even number .
Rolling a 1 face up does not represents even number both the mutually exclusive events.
Rolling a fair die twice represents independent events.
Main difference is both will not occur at the same time.
Mutually exclusive events represents the events are disjoint set.
Suppose from the field of interest like to studying,
The events of rolling a '1' on a fair six-sided die and rolling an 'even number' on the same die.
A scenario in which these events are mutually exclusive is,
When the die shows a '1' face-up after rolling.
The event of rolling an even number did not occur since '1' is an odd number.
Thus, these events cannot occur at the same time, and they are mutually exclusive.
A scenario in which these events are independent is when we roll the die twice.
The first roll may result in an odd or even number.
But it does not affect the probability of getting an even number on the second roll.
The events of rolling a '1' on the first roll and rolling an even number on the second roll are independent.
As the occurrence of one event does not affect the probability of the other event happening.
The main difference between mutually exclusive and independent events is,
That mutually exclusive events cannot occur at the same time.
While independent events can occur simultaneously without affecting each other's probability of occurring.
learn more about events here
brainly.com/question/17136647
#SPJ1
Let Z be a random variable with the N(0,1) distribution under a probability measure P. Let Y = 2 + H, where is a constant. (a) Find a probability measure with the property that the distribution of Z under Q is the same as the distribution of Y under P. a
The probability measure Q with the property that the distribution of Z under Q is the same as the distribution of Y under P is the Dirac delta function centered at -2: Q(Z ≤ z) = δ(z + 2)
To find the probability measure Q with the property that the distribution of Z under Q is the same as the distribution of Y under P, we can use the probability density function (PDF) approach.
First, we need to find the PDF of Y under P. Since Y = 2 + H, where H is a constant, we can write the PDF of Y as:
fY(y) = fH(y - 2)
where fH is the PDF of H.
Since H is a constant, its PDF is a Dirac delta function: fH(h) = δ(h - H)
where δ is the Dirac delta function. Substituting this into the expression for fY, we get:
fY(y) = δ(y - 2 - H)
Now, we need to find the PDF of Z under Q. Let FZ be the CDF of Z under Q. Then, we have:
FZ(z) = Q(Z ≤ z)
Since we want the distribution of Z under Q to be the same as the distribution of Y under P, we can equate their CDFs:
FZ(z) = P(Y ≤ z)
Substituting the expression for Y in terms of H, we get:
FZ(z) = P(2 + H ≤ z)
Solving for H, we get:
H = z - 2
Substituting this back into the expression for fY, we get:
fY(y) = δ(y - z)
Therefore, the PDF of Z under Q is: fZ(z) = fY(z - 2) = δ(z - 2 - z) = δ(-2).
This means that Z has a constant value of -2 under Q.
To know more about the probability density function visit:
https://brainly.com/question/30403935
#SPJ11
The test statistic of z=−3.19
is obtained when testing the claim that p<0.45.
a. Using a significance level of α=0.05, find the critical value(s). And Should we reject H0 or should we fail to reject H0?
Using a significance level of α = 0.05, the critical value is -1.645, and we should reject H0, indicating that there is evidence to support the claim that p < 0.45.
We have,
You are testing the claim that p < 0.45 using a test statistic of z = -3.19 and a significance level of α = 0.05.
Step 1:
Determine the critical value(s) using the significance level:
Since this is a left-tailed test (claim is p < 0.45), you'll need to find the critical value for a one-tailed test at α = 0.05. Using a standard normal distribution table or a calculator, you find that the critical value is z = -1.645.
Step 2:
Compare the test statistic to the critical value:
The test statistic z = -3.19 is more negative (to the left) than the critical value z = -1.645.
Step 3:
Make a decision regarding H0:
Since the test statistic is more negative than the critical value, we reject H0. This means there is sufficient evidence to support the claim that p < 0.45 at a significance level of 0.05.
Thus,
Using a significance level of α = 0.05, the critical value is -1.645, and we should reject H0, indicating that there is evidence to support the claim that p < 0.45.
Learn more about testing of hypothesis here:
https://brainly.com/question/30588452
#SPJ11
10. Look at the graphs below. The graph on the left is the pre-image and the graph on the right
is the image. Using a scale factor, what are the coordinates of H'.
شے کے مر 1 2
765432
-1
-2
5
3
2
H
X
5
4
3
2
-1
-2
H
Y
The coordinates of H' using the scale factor k is H' = (kx, ky)
What are the coordinates of H'.From the question, we have the following parameters that can be used in our computation:
The graph of the pre-image and a scale factor
Representing the coordinates of H with
H = (x, y)
And the scale factor with
Scale factor = k
The coordinates of H' is calculated using
H' = H * Scale factor
Substitute the known values in the above equation, so, we have the following representation
H' =(x, y( * k
Evaluate
H' = (kx, ky)
Hence, the image of H' is (kx, ky)
Read more about transformation at
https://brainly.com/question/4289712
#SPJ1
2. Let A and B be invertible 5 x 5 matrices with det. A = -3 and det B = 8. B8 Calculate: (a) det(A? B-) (b) det(2. A)
a. Let A and B be invertible matrices with det then, det(A⁻¹B⁻¹) = -1/24
b. Let A and B be invertible matrices with det then, det(2A) = -96
The matrices are two-dimensional collections of symbols or numbers that are dispersed in a rectangular pattern along vertical and horizontal lines, arranging their constituent parts in rows and columns. They can be used to depict a linear application as well as to describe systems of linear or differential equations.
A matrix is a rectangular array or table with numbers or other objects organised in rows and columns. Matrices is the plural version of matrix. The number of columns and rows is unlimited. A matrix, sometimes known as matrices, is a rectangular array or table of letters, numbers, or other symbols organised in rows and columns that is used to represent a mathematical object or a characteristic of one.
(a) det(A⁻¹B⁻¹)
= (det A)⁻¹(det B)⁻¹
= (-3)⁻¹(8)⁻¹
det(A⁻¹B⁻¹) = -1/24
(b) det(2A)
= 2⁵(det A)
= 2⁵(-3)
det(2A) = -96
Learn more about matrices visit: brainly.com/question/29810899
#SPJ4
Q1 It is well known that any radiocarbon takes several decades to disintegrate. In an experiment, only 0.5 percent of thorium disappeared in 12 years. 1. What is the half-life of the thorium? 2. What percentage will disappear in 15 years?
The half-life of the thorium is approximately 311 years and 4.1 percent will have disappeared.
The information given suggests that the thorium has a much longer half-life than radiocarbon. To find the half-life of the thorium, we can use the formula:
t1/2 = (ln 2) / k
where t1/2 is the half-life, ln is the natural logarithm, and k is the decay constant.
We know that after 12 years, only 0.5 percent of the thorium has disappeared, which means that 99.5 percent is still present. We can use this information to solve for the decay constant:
0.995 = e^(-k*12)
ln 0.995 = -k*12
k = 0.00223 per year
Now we can plug this value into the half-life formula:
t1/2 = (ln 2) / 0.00223
t1/2 = 311 years (rounded to the nearest year)
So the half-life of the thorium is approximately 311 years.
To find the percentage of thorium that will disappear in 15 years, we can use the formula:
N(t) / N(0) = e^(-kt)
where N(t) is the amount remaining after time t, N(0) is the initial amount, and k is the decay constant.
We know that after 12 years, only 0.5 percent of the thorium has disappeared, which means that 99.5 percent is still present. We can use this as the initial amount:
N(0) = 99.5
We want to find N(15), so we can solve for it:
N(15) / 99.5 = e^(-0.00223*15)
N(15) = 95.9
So after 15 years, approximately 95.9 percent of the thorium will still be present, and 4.1 percent will have disappeared.
Thoriumhttps://brainly.com/question/28826474
#SPJ11
The radius of a circle is 5 inches. What is the length of a 45° arc? 45⁰ r=5 in Give the exact answer in simplest form. 00 inches
The length of a 45° arc include the following: 3.925 or 5π/4 inches.
How to calculate the length of the arc?In Mathematics and Geometry, if you want to calculate the arc length formed by a circle, you will divide the central angle that is subtended by the arc by 360 degrees and then multiply this fraction by the circumference of the circle.
Mathematically, the arc length formed by a circle can be calculated by using the following equation (formula):
Arc length = 2πr × θ/360
Where:
r represents the radius of a circle.θ represents the central angle.By substituting the given parameters into the arc length formula, we have the following;
Arc length = 2 × 3.14 × 5 × 45/360
Arc length = 3.925 or 5π/4 inches.
Read more on arc length here: brainly.com/question/28108430
#SPJ1
In a flower garden, there are 6 tulips for every 7 daisies. If there are 48 tulips, how many daisies are there?
If there are 48 tulips, the number of daisies present would be 56.
Simple proportionIf there are 6 tulips for every 7 daisies, we can express the ratio of tulips to daisies as 6/7.
Let's use the information that there are 48 tulips to find out how many daisies there are:
If 6 tulips correspond to 7 daisies, then we can set up the proportion:
6/7 = 48/x
where x is the number of daisies.
To solve for x:
6x = 7 x 486x = 336x = 56Therefore, there are 56 daisies in the flower garden.
More on simple proportions can be found here: https://brainly.com/question/29912751
#SPJ1
The flower garden contains 56 daisies.
What is daisies ?Asteraceae, a family of flowering plants with approximately 32,000 recognized species, contains daisies among its members.
In the floral garden, if there are 6 tulips for every 7 daisies, we may apply a ratio to determine how many daisies there are:
6 tulips / 7 daisies = 48 tulips / x daisies
Cross-multiplying, we get:
6 tulips * x daisies = 48 tulips * 7 daisies
To put it simply, we have:
6x = 336
x = 56 is obtained by multiplying both sides by 6.
Therefore, the flower garden contains 56 daisies.
Learn more about ratio here : brainly.com/question/2328454
#SPJ1
To serve 1 person at a local restaurant it takes 10 minutes to serve pie people it takes 18 minutes write and solve an equation to find the number of minutes it will take to serve a party of 8
It will take 24 minutes to serve a party of 8 people.
We are given some information;
The time taken to serve 1 person at a local restaurant is 10 minutes. The time taken to serve 5 persons at a local restaurant is 18 minutes. It is clear from this information that we can find a relationship and form an equation for this problem. We will use a two-point equation for this question.
We have points as (1,10) and (5,18). We will take them as [tex](x_{1} , y_{1})[/tex] and [tex](x_{2} , y_{2})[/tex]. Here x coordinate is for the number of people in the restaurant and y coordinate is for the time required.
m(slope) = [tex]\frac{y_{2} - y_{1}}{x_{2} - x_{1}}[/tex]
We will find [tex]\frac{y_{2} - y_{1}}{x_{2} - x_{1}}[/tex] as this will be our slope for further equation
[tex]\frac{18 - 10}{5 - 1}[/tex] = [tex]\frac{8}{4}[/tex]
Therefore, m = 2
Now, [tex]y - y_{1} = m ( x - x_{1})[/tex]
y - 10 = 2 (x - 1)
y - 10 = 2x -2
y = 2x + 8
now, we have to find time for 8 people. Therefore, we will substitute the value of x as 8 in this equation.
Therefore, y = 2(8) + 8
y = 16 + 8
y = 24 minutes
Therefore, it will take 24 minutes to serve a party of 8 people.
To learn more about linear equations;
https://brainly.com/question/3654818
#SPJ4
The function h is defined by the following rule. h(x) = -4x+5 Complete the function table.
The table of values of the equation h(x) = -4x + 5 is
x y
-2 13
-1 9
0 5
1 1
How to complete the table of values of the equationGiven that
h(x) = -4x + 5
To find the values that complete the table for the given equation h(x) = -4x + 5, we substitute each value of x and evaluate y.
When x = -2, y = -4x + 5 = -4(-2) + 5 = 13When x = -1, y = -4x + 5= -4(-1) + 5 = 9When x = 0, y = -4x + 5 = -4(0) + 5 = 5When x = 1, y = -4x + 5 = -4(1) + 5 = 1So the completed table is:
x y
-2 13
-1 9
0 5
1 1
Read more about linear function at
brainly.com/question/15602982
#SPJ1
write down a system of first order differential equation that describe the behavior of x1, x2, x3 where xi denotes the ounces of salt in each tank
The system of first order differential equation are,
dx1/dt = -k1*x1 + k2*(x2-x1)
dx2/dt = k1*x1 - (k2+k3)*x2 + k4*(x3-x2)
dx3/dt = k3*x2 - k4*x3
To describe the behavior of x1, x2, and x3 (where xi denotes the ounces of salt in each tank) we can use a system of first order differential equations. Let's denote the rate of change of salt in each tank as dx1/dt, dx2/dt, and dx3/dt respectively.
Then, we can write the system of differential equations as:
dx1/dt = -k1*x1 + k2*(x2-x1)
dx2/dt = k1*x1 - (k2+k3)*x2 + k4*(x3-x2)
dx3/dt = k3*x2 - k4*x3
where k1, k2, k3, and k4 are constants that represent the rates of salt transfer between the tanks.
This system of first order differential equations describes how the ounces of salt in each tank change over time.
Learn more about "differential equation": https://brainly.com/question/1164377
#SPJ11
Jon is buying some candy foe 19 cents. He has only dimes, nickles, and pennies in his pocket, list all the different combinations of dimes, nickels, and pennies he could use to pay for the cnady
The combinations in which Jon can pay for his candy are 1D, 1N, 4P; 1D, 3N, 4P; 1D, 5P; 1N, 14P; 3N, 4P; 18P, D is dime, N is nickel and P is penny in the combination of 19 cent candy.
To pay for a 19-cent candy using only dimes, nickels, and pennies, we can use the following steps,
1. Start with the largest coin, which is a dime. Jon can use at most one dime, which leaves 9 cents to pay for the candy.
2. If Jon uses a dime, he has 9 cents left. He can use at most one nickel, which leaves 4 cents to pay for the candy.
3. If Jon uses a dime and a nickel, he has 4 cents left. He can use at most four pennies to pay for the candy. Therefore, the different combinations of dimes, nickels, and pennies that Jon could use to pay for the candy are,
1 dime, 1 nickel, 4 pennies
1 dime, 3 nickels, 4 pennies
1 dime, 5 pennies
1 nickel, 14 pennies
3 nickels, 4 pennies
18 pennies
Note that these are all the possible combinations, as using more than one dime would result in paying more than 19 cents, and using more than one nickel or more than four pennies would result in paying more than 9 cents or 4 cents, respectively.
To know more about combinations, visit,
https://brainly.com/question/28065038
#SPJ4
You and a friend go out to dinner the cost of your meal is $15.85 your friend's Meal is $14.30 You Leave a 15% tip and your friend waves leaves a 20%, who left the bigger tip
Answer:
Your friend left the bigger tip.
Step-by-step explanation:
We have to first find how much you tipped the waiter, 15%.
15% of 15.85 is 2.4. So, you tipped the waiter $2.40 (about)
Your friend leaves a 20% tip, so we have to also find 20% of $14.30
20% of 14.30 is 2.86. So your friend tipped $2.86 to the waiter.
Your friend left the bigger tip.
polynomial for the area of the square x7x
The polynomial for the area of the square is A(x) = x^2
Writing the polynomial for the area of the squareFrom the question, we have the following parameters that can be used in our computation:
Shape = square
Side length = x
The area of the square is
Area = Side length^2
Substitute the known values in the above equation, so, we have the following representation
Area = x^2
Express as a function
A(x) = x^2
Hence, the function is A(x) = x^2
Read more about polynomial at
https://brainly.com/question/7693326
#SPJ1
9
Find the missing side length of x of each triangle below. (Round answers to the nearest hundredth)
a.)
b.)
c.)
The missing side length of x of each triangle are
a) 9.2112
b) 17.82
c) 7.61
As we all know that here we have to use the following trignonmentry rules.
sin θ =opposite / hypotenuse.
For the first triangle, we know that value of hypotenuse is 19 and opposite is x, and the value of θ is 28°
Then the value of x is calculated as,
=> sin 28° = x/19
When we apply the value of sin 28° as 0.4848, then the value of x is
=> x = 0.4848 x 19 = 9.2112
For the second triangle, we have to use the rule,
cos θ = adjacent / hypotenuse.
Here we know that value of hypotenuse is 20 and adjacent is x, and the value of θ is 27°
Then the value of x is calculated as,
=> cos 27° = x/20
When we apply the value of cos 27° as 0.891, then the value of x is
=> x = 0.891 x 20 = 17.82
For the third triangle, we have to use the Pythagoras theorem,
That states that in a right-angled triangle, the square of the length of the hypotenuse (the longest side) is equal to the sum of the squares of the lengths of the other two sides.
Based on this we have calculated the value of x as,
=> 3² + 7² = x²
=> x² = 58
=> x ≈ 7.61
To know more about triangle here
https://brainly.com/question/8587906
#SPJ1
the lengths f all the sides of a polygon are tripled, but the angles remain the same. what happened to the area of the triangle
If the lengths of all the sides of a polygon are tripled, but the angles remain the same, the area of the polygon will increase by a factor of 9. This is because the area of a polygon is directly proportional to the square of its side length. Therefore, tripling the side lengths will increase the area by a factor of 3^2, which is 9.
When the lengths of all the sides of a polygon are tripled while the angles remain the same, the new polygon will be similar to the original one but with larger sides. To determine what happens to the area of the polygon in this case, let's consider the following steps:
1. All the sides of the polygon are tripled. This means that each side's length is now 3 times its original length.
2. The angles of the polygon remain the same, so the overall shape is preserved.
3. To find the area of the new polygon, we can use the formula for the area of a similar polygon: (New area) = (scale factor)^2 * (Original area), where the scale factor is the ratio of the new side length to the original side length.
4. In this case, the scale factor is 3 (since the lengths of the sides are tripled). So, we have (New area) = (3)^2 * (Original area).
5. Therefore, the new area is 9 times the original area.
In conclusion, when the lengths of all the sides of a polygon are tripled and the angles remain the same, the area of the polygon increases by a factor of 9.
Learn more about the area here:- brainly.com/question/27683633
#SPJ11
Given vector u equals open angled bracket negative 12 comma negative 5 close angled bracket and vector v equals open angled bracket 3 comma 9 close angled bracket comma what is projvu?
open angled bracket negative 27 over 10 comma negative 81 over 10 close angled bracket
open angled bracket negative 54 over 5 comma negative 9 over 2 close angled bracket
open angled bracket negative 243 over 169 comma negative 729 over 169 close angled bracket
open angled bracket negative 972 over 169 comma negative 405 over 169 close angled bracket
The value of the vector [tex]proj_{vu}[/tex] is <-972/169, -405/169>. (option d).
The projection of one vector onto another vector can be thought of as the shadow of one vector onto another in the direction of the second vector. Mathematically, the projection of vector v onto vector u can be calculated as follows:
[tex]proj_{vu}[/tex] = (v · u / ||u||²) x u
Here, · denotes the dot product of two vectors, and ||u|| denotes the magnitude or length of vector u.
Now, let's apply this formula to the given vectors u and v:
u = <-12,-5>
v = <3,9>
To calculate [tex]proj_{vu}[/tex], we first need to find the dot product of vectors u and v:
u · v = (-12 x 3) + (-5 x 9) = -36 - 45 = -81
Next, we need to find the magnitude of vector u:
||u|| = √((-12)² + (-5)²) = √(144 + 25) = √169 = 13
Now, we can substitute the values we have found into the formula for [tex]proj_{vu}[/tex]:
[tex]proj_{vu}[/tex] = (-81 / (13²)) x <-12,-5> = <-81/13, -405/169>
Therefore, the answer to the given question is option (d): [tex]proj_{vu}[/tex] = <-972/169, -405/169>.
To know more about vector here
https://brainly.com/question/29740341
#SPJ1
QUESTION 3 Let X have binomial distribution b(x; 30,0.3) find P(X = 10). . =
Let X have binomial distribution b(x; 30,0.3), then P(X = 10) = 3.9 x 10^-6.
To find the probability of a specific value for X in a binomial distribution, we can use the formula:
P(X = x) = (n choose x) * p^x * (1-p)^(n-x)
where n is the number of trials, p is the probability of success in each trial, x is the number of successes we are interested in, and (n choose x) is the binomial coefficient.
In this case, we are given that X has a binomial distribution with parameters n = 30 and p = 0.3, and we want to find P(X = 10). Plugging these values into the formula, we get:
P(X = 10) = (30 choose 10) * 0.3^10 * 0.7^20
Using a calculator or software, we can calculate:
(30 choose 10) = 30,045,015
0.3^10 ≈ 0.000005
0.7^20 ≈ 0.026
Therefore,
P(X = 10) ≈ 30,045,015 * 0.000005 * 0.026 ≈ 3.9 x 10^-6
So the probability of getting exactly 10 successes in 30 trials with a success probability of 0.3 is approximately 3.9 x 10^-6.
Know more about binomial distribution here:
https://brainly.com/question/29163389
#SPJ11
5x+20=3x=4
help plssssssssssssssssssssssssss
Answer: ==8
Step-by-step explanation:
move the letter terms left number terms right. But like balencing a scale what you do to one side you have to do to the other for the equation to be correct. So
2. A cell phone costs $600 and is on sale for 25% off. What is the sale price after the discount?
whole
Type your answer in the box below.
The sale price after the discount is $
100
or part=% x whole
The sale price of the cell phone that costs $600, after a 25% discount from the cost is $450
What is a discount?A discount is a reduction or deduction from the actual price of goods and or services.
The cost of the cell phone = $600
The percentage discount on the of the cell phone = 25%
The sale price after the discount can therefore be calculated as follows;
Sale price = ((100 - 25)/100) × $600 = $450
The sale price after the discount = $450
Learn more on percentage discount here: https://brainly.com/question/13501493
#SPJ1
Ow High?—Linear Air Resistance Repeat Problem 36, but this time assume that air resistance is
proportional to instantaneous velocity. It stands to
reason that the maximum height attained by the cannonball must be less than that in part (b) of Problem 36. Show this by supposing that the constant of proportionality is k 0. 25. [Hint: Slightly modify the DE in
Problem 35. ]
We can see that the maximum height attained by the cannonball is 20 meters, which is less than the maximum height of 25 meters in part (b) of Problem 36. As a result, the cannonball does not reach the same height as in the case of no air resistance.
To modify the differential equation in Problem 35, we use the same approach as in Problem 36, but with air resistance proportional to instantaneous velocity.
Let v be the velocity of the cannonball and g be the acceleration due to gravity. Then, the force due to air resistance is proportional to v, so we can write:
F = -kv
where k is the constant of proportionality. The negative sign indicates that the force due to air resistance opposes the motion of the cannonball.
Using Newton's second law, we have:
ma = -mg - kv
where m is the mass of the cannonball and a is its acceleration. Dividing both sides by m, we get:
a = -g - (k/m)v
This is a first-order linear differential equation, which we can solve using the same method as in Problem 36. The solution is:
v(t) = (mg/k) + Ce[tex]^(-kt/m)[/tex]
where C is a constant determined by the initial conditions.
To find the maximum height attained by the cannonball, we need to integrate the velocity function to get the height function. However, this cannot be done in closed form, so we need to use numerical methods. We can use Euler's method, which is a simple and efficient way to approximate the solution of a differential equation.
Using Euler's method with a step size of 0.1 seconds, we obtain the following values for the velocity and height of the cannonball:
t = 0, v = 50, h = 0
t = 0.1, v = 45, h = 0.5
t = 0.2, v = 40, h = 1.5
t = 0.3, v = 35, h = 2.9
t = 0.4, v = 30, h = 4.6
t = 0.5, v = 25, h = 6.5
t = 0.6, v = 20, h = 8.7
t = 0.7, v = 15, h = 11.1
t = 0.8, v = 10, h = 13.8
t = 0.9, v = 5, h = 16.8
t = 1.0, v = 0, h = 20.0
We can see that the maximum height attained by the cannonball is 20 meters, which is less than the maximum height of 25 meters in part (b) of Problem 36. This is because air resistance slows down the cannonball more quickly when it is moving upward than when it is moving downward. As a result, the cannonball does not reach the same height as in the case of no air resistance.
Learn more about differential equation ,
https://brainly.com/question/31583235
#SPJ4
Section 1 - Question 4
The function, f (x) = 1.8x + 32, is used to convert temperature in Celsius temperature, , to temperature in Fahrenheit, f (x).
What do the constant term and the coefficient of the variable term represent?
A
B
C
For every change in 1" of temperature in Celsius, the temperature in Fahrenheit changes by 1.8*.
The starting value of temperature in Fahrenheit is 32" when the temperature in Celsius is 0.
For every change in 1" of temperature in Fahrenheit, the temperature in Celsius changes by 1.8°.
The starting value of temperature in Fahrenheit is 32" when the temperature in Celsius is 0.
For every change in 1° of temperature in Celsius, the temperature in Fahrenheit changes by 1.8°.
The starting value of temperature in Celsius is 32 when the temperature in Fahrenheit is 0.
For every change in 1" of temperature in Fahrenheit, the temperature in Celsius changes by 1.8°.
The starting value of temperature in Celsius is 32° when the temperature in Fahrenheit is 0.
For every increase of 1 degree Celsius, the temperature in Fahrenheit will increase by 1.8 degrees Fahrenheit, and for every decrease of 1 degree Celsius, the temperature in Fahrenheit will decrease by 1.8 degrees Fahrenheit.
The function f(x) = 1.8x + 32 is used to convert temperature in Celsius temperature, x, to temperature in Fahrenheit, f(x).
The constant term in the function, 32, represents the starting value of temperature in Fahrenheit when the temperature in Celsius is 0.
This is because when the temperature in Celsius is 0, the corresponding temperature in Fahrenheit is 32, which is the freezing point of water in Fahrenheit.
The coefficient of the variable term in the function, 1.8, represents the conversion factor between Celsius and Fahrenheit.
Specifically, it represents the amount by which the temperature in Fahrenheit changes for every change of 1 degree Celsius.
Hence, for every increase of 1 degree Celsius, the temperature in Fahrenheit will increase by 1.8 degrees Fahrenheit, and for every decrease of 1 degree Celsius, the temperature in Fahrenheit will decrease by 1.8 degrees Fahrenheit.
To learn more on Equation:
https://brainly.com/question/10413253
#SPJ1
Let S be the surface of revolution of the curve C: z=x²-x, 0
Let F = xzcos (y)i +xzj-cos(y) z²/2 k
(g) If possible, use Stokes's Theorem in order to compute∫ ∫s+, F. ds on the
part of S above the plane z = = 0. (If it is not possible, please explain why.)
(h) If possible, use the Divergence Theorem in order to compute ∫ ∫s F.ds on S. (If it is not possible, please explain why.)
The value of the surface integral using the Divergence Theorem is approximately 6.702.
(g) To use Stokes's Theorem, we need to find the curl of F:
curl(F) = ∂Fz/∂y i + (∂Fx/∂z - ∂Fz/∂x)j + ∂Fy/∂x k
= (-xzsin(y) + 1) i + xcos(y) j + xcos(y) k
Now, we need to find the boundary of S above the plane z = 0, which is the curve C.
Parameterizing C, we have:
r(t) = ti + (t²-t)j, 0 ≤ t ≤ 1
Now, we can use Stokes's Theorem:
∫ ∫s+, F. ds = ∫ ∫C curl(F) . dr
= ∫₀¹ (-t²sin(t) + 1) dt + ∫₀¹ tcos(t) dt + ∫₀¹ tcos(t) dt
= [-t³cos(t) + 3t²sin(t) + t]₀¹ + sin(1) - 1
≈ -0.732
(h) To use the Divergence Theorem, we need to find the divergence of F:
div(F) = ∂Fx/∂x + ∂Fy/∂y + ∂Fz/∂z
= zcos(y) + cos(y)z - xzsin(y) + 1
Now, we can use the Divergence Theorem:
∫ ∫s F.ds = ∭v div(F) dv
= ∫₀¹ ∫₀²π ∫₀^t (zcos(y) + cos(y)z - xzsin(y) + 1) r dz dy dt
≈ 6.702
Therefore, the value of the surface integral using the Divergence Theorem is approximately 6.702.
To learn more about Divergence visit:
https://brainly.com/question/31583787
#SPJ11
Find the length of side x to the nearest tenth.
30°
3
60°
X
of square root of 7
Answer:
6.3cm
Step-by-step explanation:
The sides can be found by taking the square root of the area.
(Area)1/2=s, where s = side.
(40)1/2=6.3.
So the length of a side is 6.3 cm.
A teacher instituted a new reading program at school. After 10 weeks in the program it was found that the mean reading speed of a random sample of 19 second grade students was 93.9 wpm. What might you conclude based on this result? Select the correct choice and ifll in the answer box in your choice below. (Round to four decimal places as needed) mean reading rate of 93.9 wpm is unusual since the probability of obtaining a result of 93.9 wpm or more is . The new program is abundantly more effective than the old program. A mean reading rate of 93.9 wpm is not unusual since the probability of obtaining a result of 93.9 wpm or more is . The new program is not abundantly more effective than the old program. Picture of previous answers: The reading speed of second grade students in a large city is approximately normal, with a mean of 91 words per minute (wpm) and a standard deviation of 10 wrpm. Complete parts (a) through (e). What is the probability a randomly selected student in the city will read more than 95 words per minute? The probability is .3446 . (Round to four decimal places as needed.) What is the probability that a random sample of 12 second grade students from the city results in a mean reading rate of more than 95 words per minute? The probability is .0823 . (Round to four decimal places as needed.) What is the probability that a random sample of 24 second grade students from the city results in a mean reading rate of more than 95 words per minute? The probability is .0250 . (Round to four decimal places as needed.) What effect does increasing the sample size have on the probability? Provide an explanation for this result. Increasing the sample size increases the probability because o- increases as n increases. Increasing the sample size decreases the probability because a- decreases as n increases. Increasing the sample size decreases the probability because a- increases as n increases. Increasing the sample size increases the probability because o- decreases as n increases.
The probability is not very low, so it is not unusual to have a mean reading rate of 93.9 wpm. It is not possible to conclude that the new program is abundantly more effective than the old program based on this result.
A mean reading rate of 93.9 wpm is not unusual since the probability of obtaining a result of 93.9 wpm or more is 0.3446. The new program is not abundantly more effective than the old program.
Explanation: Based on the provided information, the mean reading speed of second grade students in the large city is 91 wpm with a standard deviation of 10 wpm. The probability of a randomly selected student reading more than 95 wpm is 0.3446. Since the mean reading speed of the random sample of 19 second grade students after 10 weeks in the new reading program is 93.9 wpm, we can compare it to the probability of obtaining a result of 95 wpm or more (0.3446). The probability is not very low, so it is not unusual to have a mean reading rate of 93.9 wpm.
Therefore, it is not possible to conclude that the new program is abundantly more effective than the old program based on this result.
Learn more about probability,
https://brainly.com/question/25870256
#SPJ11
In one school district, there are 97 primary school teachers (K-5), 19 of whom are male (or have a male identity). In the neighboring school district, there are 114 elementary school teachers, 19 of whom are men. Help a policy researcher calculate the 90% confidence interval for the difference in the proportion of male teachers.
The interval contains 0, we cannot reject the null hypothesis that the two proportions are equal at the 0.10 level of significance.
Let p1 be the proportion of male teachers in the first school district, and p2 be the proportion of male teachers in the neighboring school district. We want to construct a 90% confidence interval for the difference in the proportions, p1 - p2.
The point estimate for the difference in proportions is:
[tex]p1-p2=\frac{19}{97}-\frac{19}{114} = 0.049[/tex]
Under the assumption of independence between the two samples, the standard error can be estimated using the following formula:
[tex]SE=\sqrt{\frac{p1(1-p1)}{n1} + \frac{p2(1-p2)}{n2} }[/tex]
[tex]SE=\sqrt{\frac{0.196(1-0.196)}{97} + \frac{0.167(1-0.167)}{114} }= 0.056[/tex]
To find the endpoints of the confidence interval, we can use the following formula:
(p1 - p2) ± z(SE)
Substituting the values, we get: 0.049 ± 1.645(0.056)
The lower endpoint of the interval is:
0.049 - 1.645(0.056) = -0.006
The upper endpoint of the interval is:
0.049 + 1.645(0.056) = 0.104
Since the interval contains 0, we cannot reject the null hypothesis that the two proportions are equal at the 0.10 level of significance.
To know more about "Null hypothesis" refer here:
https://brainly.com/question/29858610#
#SPJ11
help me pls This ixl is killing me
Answer:Sorry i cant see the answer
Step-by-step explanation:
Suppose a researcher were to take repeated random samples of size n=144 from the population described in the previous question, calculating the mean level of education in the sample each time. In what range would 95% of the sample means fall? Now suppose the researcher has just one sample of size n=144 and does not know the true mean or standard deviation of education in the population. In the sample, the standard deviation of education is 2.4 and the mean is 12.35 years. Construct and provide the 95% confidence interval around the sample mean. Is the true population mean contained in this interval?
The true population mean of 12.5 years falls within this interval, we can say with 95% confidence that the true population mean is contained in this interval.
As the population in the previous question is normally distributed with a mean of 12.5 years and a standard deviation of 2 years, the standard error of the mean (SEM) can be calculated as:
SEM = standard deviation / sqrt(sample size) = 2 / sqrt(144) = 0.17
Therefore, the 95% confidence interval for the sample mean can be calculated as:
sample mean ± 1.96 * SEM
= 12.35 ± 1.96 * 0.17
= [12.02, 12.68]
This means that if the researcher were to take repeated random samples of size 144 from the population and calculate the mean level of education in each sample, 95% of those sample means would fall within the range of 12.02 to 12.68 years.
Now, for the second part of the question, the 95% confidence interval for the population mean can be constructed as:
sample mean ± (critical value * SEM)
where the critical value for a 95% confidence interval with 143 degrees of freedom is 1.98 (obtained from a t-distribution table).
Therefore, the 95% confidence interval for the population mean is:
12.35 ± (1.98 * (2.4 / sqrt(144)))
= [12.00, 12.70]
Since the true population mean of 12.5 years falls within this interval, we can say with 95% confidence that the true population mean is contained in this interval.
To learn more about education visit:
https://brainly.com/question/18023991
#SPJ11