Classify the variables in the data if it’s (qualitative, nominal, ordinal, quantitative, discrete, or continuous etc)

If the slope of the line has two negative signs, then it is positive.

The slope of a linear function represents the rate of change of the linear function.

If we have two points on the linear function, then the slope is obtained by the division of the change in the output by the change in the input.

If both changes are negative, then we are dividing two negative numbers, meaning that the slope is positive, as the quotient of two negative numbers is positive.

More can be learned about linear functions at https://brainly.com/question/24808124

#SPJ1

49 is the shaded part of the rectangle.

Therefore, the rule for its area is base1+base2/2xh

Base1=9

Base2=20

Height = 4

Therefore, 9+20/2 x 4= 49.

The denominator is the total number of pieces that make up the whole, which is eight. That is the figure beneath the fraction bar. The numerator is the number of shaded portions, which is 7. That is the value shown above the fraction bar.

The shaded region’s area is the difference between the area of the complete polygon and the area of the polygon’s unshaded portion. In polygons, the area of the shaded component can arise in two ways. The darkened zone might be found in the middle of a polygon or on its sides.

To learn more about shaded part of the rectangle to refer:

https://brainly.com/question/12248445

#SPJ1

The area of the shaded region of the rectangle is 130 sq. meter

A quadrilateral with four right angles is a rectangle. It may alternatively be described as a parallelogram with a right angle or an equiangular quadrilateral, where equiangular denotes that all of its angles are equal. A square is a rectangle with four equally long sides.

The denominator is the total number of pieces that make up the whole, which is eight. That is the figure beneath the fraction bar. The numerator is the number of shaded portions, which is 7. That is the value shown above the fraction bar.

The shaded region’s area is the difference between the area of the complete polygon and the area of the polygon’s unshaded portion. In polygons, the area of the shaded component can arise in two ways. The darkened zone might be found in the middle of a polygon or on its sides.

The base length = 9 m

The base width = 20 m

The height = 4m

The area of the shaded region = 1/2 *(9 + 4)*20 = 130 sq. meter

To learn more about shaded part of the rectangle to refer:

brainly.com/question/12248445

#SPJ1

Answer:

10.56

Step-by-step explanation:

Therefore , the solution of the given problem of gradient comes out to be

It has been established that line BC and AB are parallel option 2 is correct.

Pick two points on a graph that has a straight line as the direction. Change in y-coordinate divided by change in x-coordinate is the gradient of the line.In a visual representation, parallel lines encircle one another like train tracks. Parallel lines AB and CD go side by side.

Here,

Two lines that are parallel are denoted by the symbol ||. To indicate that AB is parallel to CD, we write AB||CD.

As a result, line segment AC's length is equal to the sum of line segments AB and BC.

The product of AB's and BC's slopes must be negative because AB and BC are obviously perpendicular to one another.

It has been established that line BC and AB are parallel.

Therefore , the solution of the given problem of gradient comes out to be

It has been established that line BC and AB are parallel.

To learn more about gradient refer to:

brainly.com/question/29578324

#SPJ1

A real - life representation of 12 / 49 = 0. 24 is the cost of a single donut in a 49 pack of donuts that cost $ 12.00

The equation is 12 / 49 = 0. 24. A real - life representation of this could have to do with unit cost, and total cost.

The 12 could be the total cost of a package of donuts that have 49 donuts inside.

The unit cost of each of these donuts would therefore be:

= Total cost of donuts / Number of donuts in package

= 12 / 49

= $ 0.24 per donut

Find out more on real - life representations at https://brainly.com/question/11509795

#SPJ1

The following expressions have length dimensions: a. at b. x3/t

d. √2ax

a. at: has a dimension of m because it is the product of acceleration (m/s2) and time(s). b. 1/2at2: has a dimension of m because it is the product of acceleration (m/s2) and time(s) squared. c. x3/t: has a dimension of m because it is the product of distance x (m) cubed and time(s).

e. v2/a: is a product of velocity (m/s) squared and acceleration (m/s2) thus it doesn't have a dimension of length. d. 2ax: is a product of 2, distance x (m), and acceleration (m/s2) so it has dimension of m.

To learn more about unit and dimensions, refer to the link:brainly.com/question/29680915

#SPJ4

The average rate of change on the interval [1, b] is:

r = 4*(b + 1)

For a function f(x), we define the average rate of change on the interval [a, b] as:

r = ( f(b) - f(a))/(b - a)

Here we have the function:

f(x) = 4x² - 7

And the interval is [1, b]

Then the average rate of change is:

r = (f(b) - f(1))/(b - 1)

r = ( 4b² - 7 - 4 + 7)/(b - 1)

r = (4b² - 4)/(b - 1)

r = 4*(b² - 1)/(b - 1)

r = 4*(b + 1)*(b - 1)/(b - 1)

r = 4*(b + 1)

Learn more about average rates of change at:

https://brainly.com/question/8728504

#SPJ1

The formula for g(x) is 2√(x-6) + 1. The solution has been obtained using the concept of translation.

What is translation?

In mathematics, a translation involves moving a shape up, down, left, or right. The translated shapes appear to be exactly the same size as the original ones; thus, the shapes are consistent with one another. Just one or more directions have been changed. There is no change to the shape because it is simply being moved from one location to another.

The object's shift in location can occur in a variety of ways, such as initially moving left, then turning right, and so on. Each point on the form will translate by the same number of units.

We are given f(x) = 2√x

Now, shifted down 1 unit, we get

2√x + 1

Also, shifted right 6 units, we get

2√(x-6)

So, g(x) = 2√(x-6) + 1

Hence, the formula for g(x) is 2√(x-6) + 1.

Learn more about translation from the given link

https://brainly.com/question/1046778

#SPJ1

The measure of angle POQ is given as follows:

30º.

The area of a circle of radius r is given by π multiplied by the radius squared, as follows:

A = πr²

The radius of the circle in this problem is given as follows:

r = OP = 2.

(distance of the center O to point P on the circumference).

Hence the area of the circle is given as follows:

A = 4π.

The area of the sector is given as follows:

π/3.

The ratio of the area of the sector and the area of the circumference is given as follows:

(π/3)/(4π) = 1/12.

The entire area has a measure of 360º, hence the angle measure is obtained as follows:

1/12 x 360 = 30º.

The problem is given by the image presented at the end of the answer.

More can be learned about angle measures at https://brainly.com/question/25716982

#SPJ1

Answer:

y= - 2,0

x=0,-5

slope would be y=MX+Y

so -2= -5(0)+0

To stop electrostatic discharge from harming your hardware, fasten a wrist strap to a painted metal surface.

Static electricity discharge can damage disc drives, media drives, electronic boards, and adapters. To avoid this harm, these gadgets are enclosed in antistatic bags. Take the following safety measures to guard against static electricity discharge harming this equipment.

To stop electrostatic discharge from harming your hardware, fasten a wrist strap to a painted metal surface.

Be sure to observe all electrical safety precautions while utilizing a wrist strap. For static control, a wrist strap is used. When you use or work on electrical equipment, your risk of getting shocked by electricity is not increased or decreased.

If you do not have a wrist strap, you must touch an unpainted metal surface of the system for at least 5 seconds before removing it from the ESD packing and installing or replacing components.

When you're ready to install the device in the system, take it out of the antistatic bag.

Touch the gadget to the system's metal frame while it is still in its antistatic bag.

Grasp the edges of the cards and boards. On the adaptor, stay away from the parts and gold connectors.

The complete question is :-

All of the following are precautions to prevent static electricity damage when replacing a control module EXCEPT:

Touch a known good ground before opening the package.

Wipe the terminals clean before installing the component.

Ground the package to a known good ground before opening.

See Electronic Service Precautions

Open the package only when ready to install the component.

learn more about metal surface.

https://brainly.com/question/28983273

#SPJ4

Answer:

[tex]a. \;\; \boxed{\$ 530.60}[/tex]

[tex]b.\; \;\boxed{ \$552.45}[/tex]

[tex]c,\;\;\boxed{\$610.60}[/tex]

[tex]d. \;\; \boxed{\$745.91}[/tex]

Step-by-step explanation:

All four cases deal with compound interest on the same amount of $500 and same interest rate of 2%.

The only difference is in the frequency of compounding and time

Compound Interest Formula

[tex]\boxed{A = P\left(1 + \dfrac{r}{n}\right)^{n\cdot t}\\\\}[/tex]

where

In this particular problem we have
P = $500
r = 2% = 0.02

These are common for all parts of the question
Only n an t are different for each of the question sub-parts

Part a

Compounding is done annually (once a year) for 3 years

n = 1
t = 3 years
n · t = 3

[tex]A = 500\left(1 + \dfrac{0.02}{1}\right)^3\\\\A = 500\left(1.02\right)^3\\\\A = 500(1.061208)\\\\A=\boxed{\$ 530.60}[/tex]

For accuracy of calculations, I will not compute and store the exponent part, I will perform the calculations in one shot

Part b

Here the compounding is done quarterly (4 times a year) for 5 years

n = 4
t = 5 years
nt = 4 · 5 = 20

[tex]A = 500\left(1 + \dfrac{0.02}{4}\right)^{20}\\\\\\A = 500(1.005)^{20}\\\\A =\boxed{ \$552.45}[/tex]

Part c

Compounding done monthly(12 times a year) for 10 years

n = 12

t = 10

nt = 120

[tex]A = 500\left(1 + \dfrac{0.02}{12}\right)^{120}\\\\\\A = \boxed{\$610.60}[/tex]

Part d

First let's figure out what continuous compounding means

[tex]\fbox{\begin{minipage}[t]{1\columnwidth \fboxsep - 2\fboxrule}%\textsf{What is continuous compounding?} \\\textsf{Continuous compounding is the mathematicallimit that compound interest can reach if it's calculated and reinvestedinto an account's balance over a theoretically infinite number ofperiods. While this is not possible in practice, the concept of continuouslycompounded interest is important in finance. (Investopedia)}\}%\end{minipage}}[/tex]

The formula for continuous compounding can be determine by using the standard formula for periodic compounding and taking limits as
[tex]n \rightarrow \infty[/tex]

Therefore, for compounding continuously , the formula can be derived from
[tex]\lim _{n\to \infty } P\left(1 + \dfrac{r}{n}\right)^{nt}\\\\[/tex]

One of the limit formulas states

[tex]\lim _{x\to \infty } \left(1 + \dfrac{a}{x}\right)^{x} = e^a\\\\[/tex]

Therefore
[tex]\lim _{n\to \infty } \left(1 + \dfrac{r}{n}\right)^{n} = e^r\\\\[/tex]

So for the continuous compounding case, the formula is
[tex]\boxed{A = P \cdot e^{rt}}[/tex]

Here we have
r = 0.02
t = 20 years
rt = 20(0.02) = 0.4

Plugging in P = 500, and rt = 0.4 we get
[tex]A = 500 \cdot e^{0.4}\\\\A = \boxed{\$745.91}[/tex]

Answer:

a) $530.60

b) $552.45

c) $610.60

d) $745.91

Step-by-step explanation:

[tex]\boxed{\begin{minipage}{8.5 cm}\underline{Compound Interest Formula}\\\\$ A=P\left(1+\frac{r}{n}\right)^{nt}$\\\\where:\\\\ \phantom{ww}$\bullet$ $A =$ final amount \\ \phantom{ww}$\bullet$ $P =$ principal amount \\ \phantom{ww}$\bullet$ $r =$ interest rate (in decimal form) \\ \phantom{ww}$\bullet$ $n =$ number of times interest is applied per year \\ \phantom{ww}$\bullet$ $t =$ time (in years) \\ \end{minipage}}[/tex]

Given:

Substitute the given values into the compound interest formula and solve for A:

[tex]\implies A=500\left(1+\dfrac{0.02}{1}\right)^{1 \cdot 3}[/tex]

[tex]\implies A=500\left(1.02\right)^{3}[/tex]

[tex]\implies A=500(1.061208)[/tex]

[tex]\implies A=530.604[/tex]

Therefore, the value of the account after 3 years if interest is compounded annually is $530.60 (nearest cent).

Given:

Substitute the given values into the compound interest formula and solve for A:

[tex]\implies A=500\left(1+\dfrac{0.02}{4}\right)^{4 \cdot 5}[/tex]

[tex]\implies A=500\left(1.005\right)^{20}[/tex]

[tex]\implies A=500(1.10489557...)[/tex]

[tex]\implies A=552.447788...[/tex]

Therefore, the value of the account after 5 years if interest is compounded quarterly is $552.45 (nearest cent).

Given:

Substitute the given values into the compound interest formula and solve for A:

[tex]\implies A=500\left(1+\dfrac{0.02}{12}\right)^{12 \cdot 10}[/tex]

[tex]\implies A=500\left(1.0016666...\right)^{120}[/tex]

[tex]\implies A=500(1.22119943...)[/tex]

[tex]\implies A=610.599716...[/tex]

Therefore, the value of the account after 10 years if interest is compounded monthly is $610.60 (nearest cent).

[tex]\boxed{\begin{minipage}{8.5 cm}\underline{Continuous Compounding Interest Formula}\\\\$ A=Pe^{rt}$\\\\where:\\\\ \phantom{ww}$\bullet$ $A =$ final amount \\\phantom{ww}$\bullet$ $P =$ principal amount \\\phantom{ww}$\bullet$ $e =$ Euler's number (constant) \\\phantom{ww}$\bullet$ $r =$ annual interest rate (in decimal form) \\\phantom{ww}$\bullet$ $t =$ time (in years) \\\end{minipage}}[/tex]

Given:

Substitute the given values into the continuous compounding interest formula and solve for A:

[tex]\implies A=500e^{0.02 \cdot 20}[/tex]

[tex]\implies A=500e^{0.4}[/tex]

[tex]\implies A=500(1.49182469...)[/tex]

[tex]\implies A=745.912348...[/tex]

Therefore, the value of the account after 20 years if interest is compounded continuously is $745.91 (nearest cent).

By Assuming the denominator does not equal zero. a³b³/a⁴b equivalent expression is  b⁴/a.

What is an equivalent expression?

Equivalent expressions are expressions that have the same result when they are simplified.

Two expressions are considered equivalent if they can be transformed into each other by applying mathematical operations such as simplification, combining like terms, or applying the properties of arithmetic and algebra.

Equivalent expressions can be used to solve problems more efficiently or to help understand complex mathematical concepts.

For example, simplifying an expression to its simplest form can make it easier to understand or perform further calculations with it.

Equivalent expressions can also be used to check the correctness of a solution to a problem, by verifying that the answer can be transformed into the expected result.

The given expression can be simplified as follows:

a³b³ / a⁴b = (a³/a⁴) * (b³/b)

a³/a⁴ = 1/a

b³/b = b²

Hence, By Assuming the denominator does not equal zero. a³b³/a⁴b equivalent expression is  b⁴/a.

To learn more about equivalent expressions visit,

brainly.com/question/14321641

#SPJ1

Answer:

8.75 miles

Step-by-step explanation:

using the equation for the line of best fit

y = 0.8x + 0.75

substitute x = 10 into the equation

y = 0.8(10) + 0.75 = 8 + 0.75 = 8.75

the equation predicts she will run 8.75 miles in week 10

Answer:

2

Step-by-step explanation:

If a pizza feeds 3 kids and you need to feed 6 kids, the scale factor for calculating how many pizzas you need would be 2.

A scale factor is used to determine the relationship between the size of an object and a similar or corresponding object. In this case, you have a pizza that can feed 3 kids and you need to feed 6 kids, so the relationship between the number of kids that can be fed by one pizza and the number of kids you need to feed is 6/3 = 2

So, you need to double the quantity of pizza to feed 6 kids, therefore the scale factor would be 2.

Answer:

38

Step-by-step explanation:

Answer:

Step-by-step explanation:

7x9=63

because 7 down times 9 across

If a northbound train and a southbound train meet each other on parallel tracks heading in opposite directions. The speeds that the  two trains are traveling is:61 mph.

Speed of westbound train = x mph

Speed of eastbound train = x+16

2.5x + 2.5(x+16) = 265

2.5x + 2.5x + 40 = 265

Combine like terms

5x = 225

Divide both side by 5x

x =225/5

x = 45 mph

Westbound train = 45mph

Eastbound train =45 mph +16 mph = 61 mph

Therefore the speed is 61mph.

Learn more about speed here:https://brainly.com/question/15544987

#SPJ1

The point (-17, -87) belongs to the third quadrant

From the question, we have the following parameters that can be used in our computation:

Point = (-17, -87)

In the above point, we have

x = -17 and y = -87

This means that the x and the y coordinates are negative

The quadrant where the x and the y coordinates are negative is the third quadrant

Hence, the point is in the third quadrant

Read more about quadrant at

https://brainly.com/question/863849

#SPJ1

When the prism is taken out of the cylinder, the composite shape's volume is 3.048.

The volume of an item in three dimensions is the area that is enclosed by its boundaries. The space that an object occupies in three dimensions is measured by its volume, which is given in cubic units. A few of illustrations of cubic units are cm3 and in3. On the other side, an item's mass is used to measure how much matter it contains. One typical method to ascertain an object's mass is to weigh it, either in pounds or kilogrammes. Unlike the primary equation for the square of a rectangular box, which would be length, breadth, and height, the primary equation in capacity is length, width, and height.

given

volume of cylinder - 9.234

volume of the prism - 6.186

the volume of composite shape is = volume of cylinder - volume of prism

= 9.234 - 6.186

= 3.048

When the prism is taken out of the cylinder, the composite shape's volume is 3.048.

To know more about volume visit :-

https://brainly.com/question/13338592

#SPJ1

a) A procedure that could be run to test how many times out of 100 a fair die should land on the number 1 is given as follows: Select a random number out of six 100 times, with 1 constituting a success and the remaining five numbers constituting a failure.

b) The 95% confidence interval for the true proportion of rolls that will land on the number 1 is given as follows: (0.174, 0.346). The interpretation is that we are 95% sure that the proportion of all rolls that land in one is between these two values.

c) As the lower bound of the interval is above the expected proportion of 0.1667, the confidence interval supports Vy's suspicions that the die is not fair.

A probability is calculated as the division of the number of desired outcomes by the number of total outcomes.

A die has six sides, one out of which is one, hence the probability of a one being rolled is given as follows:

p  = 1/6 = 0.1667.

Hence 100 trials of a procedure with 6 results should be used, in which:

A confidence interval of proportions has the bounds given by the rule presented as follows:

[tex]\pi \pm z\sqrt{\frac{\pi(1-\pi)}{n}}[/tex]

In which the variables used to calculated these bounds are listed as follows:

The confidence level is of 95%, hence the critical value z is the value of Z that has a p-value of [tex]\frac{1+0.95}{2} = 0.975[/tex], so the critical value is z = 1.96.

The parameters for this problem are given as follows:

[tex]n = 100, \pi = \frac{26}{100} = 0.26[/tex]

Then the lower bound of the interval is calculated as follows:

[tex]0.26 - 1.96\sqrt{\frac{0.26(0.74)}{100}} = 0.174[/tex]

The upper bound is calculated as follows:

[tex]0.26 + 1.96\sqrt{\frac{0.26(0.74)}{100}} = 0.346[/tex]

More can be learned about the z-distribution at https://brainly.com/question/25890103

#SPJ1

We can factor [tex]$(x^2 y^2-z^2)^2-4x^2y^2$[/tex]as:

[tex]$(x^2 y^2-z^2)^2-4x^2y^2 = (x^2 y^2-z^2-2xy\sqrt{2})(x^2 y^2-z^2+2xy\sqrt{2})$[/tex]

To calculate this:

We can see that each factor is of degree 1 and has a positive coefficient of x.

In each factor, the variables appear in alphabetic order, with the constant term at the end.

In order to factor this expression, we first use the difference of squares, by breaking it down [tex]$(x^2 y^2-z^2)^2$[/tex] as [tex]$(x^2 y^2-z^2)(x^2 y^2-z^2)$[/tex]

We can then add and subtract a suitable term, here we added and subtract 2xy * √2, to make one of the terms in each of the brackets match one of the terms of the original expression, so we can factor it out.

So, [tex]$(x^2 y^2-z^2)^2-4x^2y^2 = (x^2 y^2-z^2-2xy\sqrt{2})(x^2 y^2-z^2+2xy\sqrt{2})$[/tex].

Factors are the numbers that divide into a given number without leaving a remainder.

To learn more about the variable, visit:

brainly.com/question/29583350

#SPJ4

The entire expression is a sum with 0 factors

The coefficients are 1/2, 1 and 7

From the question, we have the following parameters that can be used in our computation:

1/2x² + x + 7

The above expression is a quadratic expression and it has three terms

Quadratic expressions with real roots have 2 factors, otherwise it would have 0 factor

The expression 1/2x² + x + 7 does not have a real root because

b² < 2ac

Also in the expression, the coefficients are 1/2, 1 and 7

i.e. a = 1/2, b = 1 and c = 7

Read more about quadratic expression at

https://brainly.com/question/1214333

#SPJ1

Complete question

consider the expresson 1/2x² + x + 7.

complete 2 descriptions of the part of the expression

The entire expression is a sum with __ factors

The coefficients are _

True, Deciding that a process that fills bottles with soda is functioning properly by checking the weights for a sample of bottles is an example of inferential statistics.

A subset of statistics known as inferential statistics uses a variety of analytical techniques to extrapolate conclusions about population data from sample data.

It is an example of inferential statistics because you are using a sample of data to make inferences about the population of bottles being filled, rather than measuring the weight of every bottle.

Hence, Deciding that a process that fills bottles with soda is functioning properly by checking the weights for a sample of bottles is an example of inferential statistics.

To learn more about functioning here:

https://brainly.com/question/12431044

#SPJ4

The vector representing the force of sphere 2 on sphere 1 is[tex]$\frac{2}{5} \vec{i}$[/tex] because the charge of sphere 2 is twice that of sphere 1 and they are separated by a distance of 5 cm.

Step 1: Calculate the charge of sphere 2. Since it is twice that of sphere 1, the charge of sphere 2 is 2 x the charge of sphere 1.

Step 2: Calculate the distance between the two spheres. This is given as 5 cm.

Step 3: Calculate the force. The force is equal to the product of the charges of the two spheres divided by the square of the distance between them.

Step 4: Construct the vector. The vector representing the force of sphere 2 on sphere 1 is[tex]$\frac{2}{5} \vec{i}$.[/tex]

The vector representing the force of sphere 2 on sphere 1 is [tex]$\frac{2}{5} \vec{i}$[/tex], as the charge of sphere 2 is twice that of sphere 1 and they are separated by a distance of 5 cm. This is calculated by multiplying the charges of the two spheres and dividing by the square of the distance between them.

Learn more about vector here

https://brainly.com/question/15709504

#SPJ4

Answer:

1/2

Step-by-step explanation:

First, let's find the GCF of 3 and 6. In this case, it's 6.

Then, lets convert every fraction so that the denominator is 6. 1/6 already has this property, so let's convert 1/3. And to do that, we multiply the fraction by 2/2.

[tex]\frac{1}{3} * \frac{2}{2} = \frac{2}{6}[/tex]

Finally, we add the fraction of beads that are red and blue together, then simplify.

[tex]\frac{2}{6} + \frac{1}{6}=\frac{3}{6} =\frac{1}{2}[/tex]

Therefore, the answer is 1/2.

The true statement is that the sample mean is not biased

From the question, we have the following parameters that can be used in our computation:

Sample selection of 2

The sample is selected such that all 4 samples are equally likely

This means that

P(Each selection) = 1/4

An unbiased sample is such that reflects all members of the population and in this case, this sample reflects the population

Hence, the sample is unbiased

Read more about biased sample at

https://brainly.com/question/30237611

#SPJ1

Answer:

...

Step-by-step explanation:

To find the number of calories Davis burns while running for 30 minutes, we can use the information that he burns 1080 calories running for 2.5 hours.

We know that 30 minutes is 1/120 of 2.5 hours. So, we can divide the total number of calories by 120 and we get the calorie burn for 30 minutes:

1080 calories / 120 = 9 calories

The number of calories Davis burns while swimming for 30 minutes can be determined by using the equation y = 266x, where x represents the number of hours he swims. We know that he swims for 30 minutes, or 1/120 hours, so we can plug that value into the equation:

y = 266(1/120) = 2.216 calories

So, Davis burns 7 calories more running for 30 minutes than swimming for 30 minutes, assuming the rates remain constant.

well, there are a total of "x" stamps in his collection, which oddly enough is 100%.

now, we know that 34% of "x" is 204, what the heck is "x"?

[tex]\begin{array}{ccll} amount&\%\\ \cline{1-2} x & 100\\ 204& 34 \end{array} \implies \cfrac{x}{204}~~=~~\cfrac{100}{34} \\\\\\ \cfrac{ x }{ 204 } ~~=~~ \cfrac{ 50 }{ 17 }\implies 17x=10200\implies x=\cfrac{10200}{17}\implies x=600[/tex]