Calculate the fair present values of the following bonds, all of which pay interest semiannually, have a face value of $1,000, have 10 years remaining to maturity, and have a required rate of return of 12 percent. a. The bond has a 5.8 percent coupon rate. (Do not round intermediate calculations. Round your answer to 2 decimal places. (e.g. 32.16)) b. The bond has a 7.8 percent coupon rate. (Do not round intermediate calculations. Round your answer to 2 decimal places. (e.g., 32.16)) C. The bond has a 12 percent coupon rate. (Do not round intermediate calculations.) a. Fair present value b. Fair present value c. Fair present value

The record of the entry to close out the revenue accounts will be as debit sales revenue (525,000), debit other revenue (57,000), and Credit Retained (582,000).

Revenue accounts' debit entries cover sales-related allowances, discounts, and refunds. Credits boost the balance while debits lower the net revenue in revenue-type accounts via the returns, discounts, and allowance accounts. ADVANCE KNOWLEDGE.

Debit entries indicate a decline in the revenue accounts in the income statement, whereas credits indicate an increase in the account. The foundation of double-entry accounting is the idea of debits and offsetting credits.

Retention Credit is the sum indicated in the applicable Participant's Retention Agreement that will be credited to the Participant's Retention Account as a "Deferred Compensation Account" (as that term is defined in the applicable Retention Agreement).

Businesses that kept paying staff while closed due to the COVID-19 epidemic or saw severe drops in gross receipts from March 13, 2020, to December 31, 2021, are eligible for the Employee Retention Credit (ERC), a refundable tax credit.

To learn more about Employee Retention Credit, click here:

https://brainly.com/question/30626051

#SPJ4

NOTE: The question given on the portal is incomplete. Here's the complete question:

QUESTION: The adjusted trial balance of Arctic Corporation at December 31 shows that sales revenue for the year was $ 525,000 and other revenue was $ 57,000. Cost of goods sold for that same period was $ 265,000​, while other expenses totaled $ 195,000. The corporation declared and paid dividends of $ 10,000 during the year. The balance of retained earnings before closing entries was $ 490,000. Record the entry to close out the revenue accounts.

1. The Year 1 Depreciation Expense is $7,000.

2. The impact on cash flow in Year 2 as a result of the events described is an increase in cash flow.

3. The Year 3 Depreciation Expense is is $9,000.

4. The Net Book Value of the Delivery Truck AFTER 3 Years is $23,900.

5. The Net Book Value of the Delivery Truck AFTER 3 Years is $5,900.

The Year 1 Depreciation Expense can be calculated as follows:

Cost of the truck = $40,000

Salvage value = $5,000

Depreciable cost for the truck is:

= Cost of the truck - Salvage value

= $40,000 - $5,000

= $35,000

Useful life of the truck = 5 years

Year 1 Depreciation Expense:

= Depreciable cost / Useful life

= $35,000 / 5

= $7,000

The increase in cashflow is because ABC initially planned to keep the truck for 5 years and then sell it for a salvage value of $5,000.

However, after 2 years, ABC now plans to keep the truck for a total of 8 years and then sell it for a salvage value of $2,000. This means that ABC will have a lower depreciation expense in Years 3-8, which will result in higher cash flows in those years.

Depreciation expense for Year 3 = (Cost - Accumulated depreciation - Salvage value) / Remaining useful life

= ($40,000 - $7,000 - $5,000) / (5 - 3) years

= $9,000

The net book value (NBV) of the delivery truck is the cost of the asset minus the accumulated depreciation.

Accumulated depreciation after 3 years = Depreciation expense for Year 1 + Depreciation expense for Year 2 + Depreciation expense for Year 3

= $7,000 + ($40,000 - $5,000 - $7,000) / 8 years + ($40,000 - $5,000 - $7,000 - $9,000) / 5 years

= $7,000 + $3,500 + $5,600

= $16,100

NBV after 3 years = Cost - Accumulated depreciation

= $40,000 - $16,100

= $23,900

The accumulated depreciation after 6 years can be calculated as:

Accumulated depreciation after 6 years = Depreciation expense for Year 1 + Depreciation expense for Year 2 + ... + Depreciation expense for Year 6

= $7,000 + ($40,000 - $5,000 - $7,000) / 8 years + ($40,000 - $5,000 - $7,000 - $9,000) / 5 years + ($40,000 - $5,000 - $7,000 - $9,000 - $9,000) / 2 years + ($40,000 - $5,000 - $7,000 - $9,000 - $9,000 - $9,000) / 1 year

= $7,000 + $3,500 + $5,600 + $8,000 + $10,000

= $34,100

NBV after 6 years = Cost - Accumulated depreciation

= $40,000 - $34,100

= $5,900.

Read more about depreciation

brainly.com/question/1203926

#SPJ1

Employees, rivals, suppliers, customer needs, owner needs, government laws, market trends, technology changes, social considerations, and economic variables are a few examples of environmental elements affecting company.

Political, economic, societal, technical, environmental, and legal aspects are examples of external variables. There are external elements that affect the company's ability to conduct business while still having an influence. Employee morale, managerial changes, and culture shifts are examples of internal influences.

The business environment, which includes forces like customers, competitors, suppliers, the government, and the social, cultural, political, technological, and legal conditions, is the totality of all factors that are external to the business firm and have a significant impact on how well it operates.

To know more about external business environments, refer to:

https://brainly.com/question/16529690

#SPJ1

Your mortgage bank will grant you the money for this 300-month loan at a 7.5 percent APR, with interest compounded monthly. Yet you only have so much money.

What is the definition of a mortgage?

A mortgage payment is often divided into four components: principal, interest, taxes, and insurance. The Primary portion is the amount removed from the outstanding loan balance. The amount of interest you pay is affected by your interest rate and loan balance. A mortgage is an agreement between you and a lender that gives the lender the right to seize your property if you do not repay the loan plus interest on time. Mortgage loans are used to buy a home or to borrow money against it.

Know more about interest Visit:

https://brainly.com/question/29480777

#SPJ1

In Dynamics 365 marketing, Sales is one of the applications that use the Microsoft Dataverse platform. The company consequently wants to implement additional Dynamics 365 applications by using dual-write. The company can use Dynamics 365 Sales to manage sales operations, customers, and products.

Organizations may streamline and automate their marketing activities with the aid of Dynamics 365 Marketing, a marketing automation tool. Quick campaigns are a feature of Dynamics 365 Marketing that let users quickly build and launch focused marketing initiatives, including email or direct mail campaigns, to particular customer or prospect groups.

Dynamics 365 Fraud Protection is another application that uses the Microsoft Dataverse platform. The company thus wants to implement additional Dynamics 365 applications by using dual-write. The company can use Dynamics 365 Fraud Protection to protect against fraud and financial crimes.

Dynamics 365 Customer Service is the third application that uses the Microsoft Dataverse platform. The company therefore wants to implement additional Dynamics 365 applications by using dual-write. The company can use Dynamics 365 Customer Service to provide customer service and support.

To learn more about Dynamics 365 marketing, visit:

https://brainly.com/question/30584254

#SPJ1

-Authority is the power or right to give orders and make decisions. -2 advantages of authority are establishes order-stability and facilitates faster decision-making. 2 disadvantages of authority are inhibits creativity and lead to micromanagement.

In an organisation, authority is the power that held by management and leadership roles, who are responsible for setting goals and direction, making decisions, and directing activities.

Advantages of authority are establishes order and stability, authority helps maintain a consistent and predictable structure, which allows people to understand their roles and responsibilities. Facilitates faster decision-making, authority enables the leader or manager to make decisions quickly, without having to consult with the team or seek approval from higher management.

Disadvantages of Authority are Inhibits creativity and innovation, when decisions are made by one individual or a small group, it can lead to a lack of creativity and innovation in the organisation. Can lead to micromanagement, without proper delegation and guidance, authority can lead to micromanagement, which can cause stress and frustration among employees.

Learn more about decision-making at:

https://brainly.com/question/3919020

#SPJ11

This type of situation is called a conflict of interest.

It arises when the personal interests of one individual or group conflict with the interests of another individual or group. In this scenario, the immediate supervisor is prioritizing her relationship with the divisional president over the needs of the team and the company.

To handle this situation, it is important to document the intern's behavior and communicate the negative impact it is having on the team's productivity and morale.

This information can then be escalated to higher management or HR, who can investigate and address the situation objectively. It is important to prioritize the well-being of the team and the company's success over personal relationships or interests.

For more questions like Conflict click the link below:

https://brainly.com/question/17085630

#SPJ11

a) Total Prime Cost Calculation for each product:

Product A = £500,000 + £400,000 + £100,000 = £1,000,000.

Product B = £200,000 + £300,000 + £100,000 = £600,000.

b) Analysis of Production Overheads:

Apportionment of Direct Wages to Production Departments:

Product A = £240,000/£400,000 × £240,000 = £144,000.

Product B = £160,000/£400,000 × £240,000 = £96,000.

Allocation of indirect cost to Production Departments:

Product A = £350,000/1,500,000 × £800,000 = £186,666.67.

Product B = £1,150,000/1,500,000 × £800,000 = £613,333.33.

Allocation of Canteen Cost to Production Departments:

Product A = £65,000/£800,000 × £200,000 = £16,250.

Product B = £65,000/£800,000 × £300,000 = £24,375.

c) Re-apportionment of Total Canteen Cost to Production Cost Centres:

Product A = £65,000/1,200,000 × £186,666.67 = £10,208.33.

Product B = £65,000/1,200,000 × £613,333.33 = £33,791.67.

d) Calculation of Total Indirect Production Cost for each Production Department:

Product A = £144,000 + £186,666.67 + £10,208.33 = £341,875.

Product B = £96,000 + £613,333.33 + £33,791.67 = £743,125.

e) Calculation of Total Production Cost for each Product:

Product A = £1,000,000 + £341,875 = £1,341,875.

Product B = £600,000 + £743,125 = £1,343,125.

f) Calculation of Production Cost per Unit for each Product:

Product A = £1,341,875/25,000 = £53.67.

Product B = £1,343,125/30,000 = £44.77.

g) Calculation of Selling Price of each Product:

Product A = £53.67 × 150% = £80.50.

Product B = £44.77 × 150% = £67.16.

Therefore, the selling price for Product A is £80.50 and for Product B is £67.16.

To learn more about prime cost, refer below:

https://brainly.com/question/30010916

#SPJ11

The development of a public relations crisis generally follows a similar pattern involving the following steps:

Persuasion theory focuses on the effective combination of elements to persuade an audience, while framing theory focuses on how information is presented to influence audience perception. Both theories are fundamental in the practice of public relations and effective communication.

Explanation of the development of a public relations crisis following a pattern that involves the following steps:

Persuasion theory argues that effective persuasion involves the combination of three main elements: the sender, the message, and the receiver. These elements must be effective to successfully persuade the audience. Framing theory, on the other hand, focuses on how information is presented to influence audience perception.

Learn more about persuasion theory and framing:

https://brainly.com/question/30416776

#SPJ11

a) The minimum variance that can be achieved is 0.05, as this is the variance of the global minimum variance portfolio.

b) The global minimum variance portfolio has an expected return of 0.15 and a variance of 0.05. The weights of the portfolio are (1/3) and (2/3) for assets R1 and R2, respectively.

c) The rough sketch of the minimum variance set in μ−σ ^2 space would be a straight line connecting the origin (0,0) to the global minimum variance portfolio (0.15,0.05). The efficient frontier is the set of all portfolios on or above this line, indicating the portfolios with minimum risk for a given expected return.

For more such questions on Global minimum variance portfolio.

https://brainly.com/question/14970184#

#SPJ11

In Louise's case  the fund will not meet the client's objective of monthly income

Louise, is a 63-year-old widow who recently retired, owns her home, has no debt, and relies on Social Security benefits, a pension, interest from her certificates of deposit, and a passbook savings account at a nearby bank to make ends meet. She is also a widow and lives alone. Interest rates have decreased, and two of her CDs are about to mature. Since she is risk-averse and worried about how she will pay her bills if her income decreases, Louise is seeking for an investment that would yield a higher monthly return than the new, lower interest rate on her CDs.

However, in her case, the fund won't generate enough money each month to achieve the client's goal. Monthly income is the client's declared investing goal. Since it is a growth fund, the asset allocation fund falls short of this goal. For this client, a low-risk income fund might be suitable.

Read more about income on:

https://brainly.com/question/28390284

#SPJ4

Based on the information provided, it does not appear that the representative's recommendation of the ABC Equity Asset Allocation Fund is suitable for Louise.

Louise is described as risk averse and concerned about meeting her expenses if her income drops. The ABC Equity Asset Allocation Fund is an equity fund, which means it invests primarily in stocks and therefore carries a higher level of risk than fixed-income investments like CDs. While the fund may have had outstanding performance over the past 3 years, past performance is not a guarantee of future results and there is no guarantee that the fund will continue to perform well in the future.

Given Louise's age, financial situation, and risk tolerance, it may be more appropriate for her to consider investments that are less risky and provide a more stable source of income. This could include investments such as high-quality bonds, annuities, or other fixed-income investments.

It's important for financial representatives to take into account a client's financial situation, risk tolerance, and investment goals when making investment recommendations. In this case, the representative's recommendation does not appear to be in line with Louise's needs and risk tolerance.

Therefore, it is recommended for Louise to invest in some more stable and less riskier places and not in the ABC Equity Asset Allocation Fund.

Learn more about risk tolerance :

https://brainly.com/question/13600319

#SPJ4

Answer :  Company A's stock price after the repurchase will be $25.50 per share.

Assuming that Company A repurchases the 20 million outstanding shares at $21 per share, the stock price after the repurchase will be $25.50 per share. This is due to the decrease in the total number of outstanding shares after the repurchase, which causes the EPS (earnings per share) to increase. The increased EPS causes the stock price to rise accordingly.

The calculation can be shown as follows: Before the Repurchase: Total market value of the company = (number of outstanding shares) x (market price per share), Total market value of the company = (20 million shares) x ($21 per share), Total market value of the company = $420 million

After the Repurchase: Total market value of the company = (number of outstanding shares) x (market price per share), Total market value of the company = (0 million shares) x ($21 per share), Total market value of the company = $0 million

However, the total market value of the company remains the same at $420 million. The $20 million borrowed funds were used to repurchase the 20 million shares and is not included in the calculation. This means that the earnings per share (EPS) has increased.

Before the Repurchase:
EPS = (Net income after taxes) ÷ (number of outstanding shares)
EPS = ($420 million x (1 - 0.25)) ÷ (20 million shares)
EPS = $21.00

After the Repurchase ;
As a result, the stock price after the repurchase will be $25.50 per share. This can be calculated by multiplying the new EPS of infinity by the current market price of $21 per share. Stock price after repurchase = (EPS) x (market price per share), Stock price after repurchase = ($Infinity) x ($21 per share), Stock price after repurchase = $25.50 per share

Therefore, Company A's stock price after the repurchase will be $25.50 per share.

Know more about share here:

https://brainly.com/question/13931207

#SPJ4

The present value of the cash inflows is Rs. 27,332.23.

To determine whether Project Pink should be accepted or not, we need to calculate the present value of the cash inflows and compare it to the initial cost of the project.

The present value of the cash inflows can be calculated using the formula:

[tex]PV = CF1/(1+r)^1 + CF2/(1+r)^2 + ... + CFn/(1+r)^n[/tex]

where PV is the present value, CF is the cash flow, r is the discount rate, and n is the number of years.

Using the given data and a discount rate of 10%, we can calculate the present value of the cash inflows as follows:

[tex]PV = 9,000/(1+0.1)^1 + 8,000/(1+0.1)^2 + 7,000/(1+0.1)^3 + 6,000/(1+0.1)^4 + 5,000/(1+0.1)^5[/tex]

[tex]PV = 9,000/1.1 + 8,000/1.1^2 + 7,000/1.1^3 + 6,000/1.1^4 + 5,000/1.1^5[/tex]

[tex]PV = 9,000/1.1 + 8,000/1.21 + 7,000/1.331 + 6,000/1.4641 + 5,000/1.61051[/tex]

PV = 8,181.82 + 6,611.57 + 5,250.47 + 4,098.09 + 3,191.28

PV = 27,332.23

Therefore, the present value of the cash inflows is Rs. 27,332.23.

Since the present value of the cash inflows is greater than the initial cost of the project (Rs. 25,000), we can conclude that Project Pink should be accepted.

Learn more about Project Pink

https://brainly.com/question/30609303

#SPJ11

If upstream or downstream costs are not included in determining the cost of products, products will be incorrectly priced.

The terms "upstream cost" and "downstream cost" are used in cost accounting to refer to the different types of costs involved in producing and selling a product. These costs can have a significant impact on the final price of the product, and therefore should be taken into account when determining the cost of products.

If these costs are not properly accounted for, the price of the product may be too low, resulting in lost profits, or too high, resulting in lost sales. Therefore, it is important to consider both upstream and downstream costs when determining the cost of products.

Learn more about "Upstream cost"; https://brainly.com/question/29481300

#SPJ11

If the exchange rate is higher than 1.47 $ per €, Porsche's € cash flows would increase, but if it is lower, Porsche's € cash flows would decrease.

a) If Porsche does not hedge its currency exposure at all, its € cash flows net of variable costs obtained from North American sales would depend on the spot exchange rate prevailing at the end of November 2009.

b) If Porsche hedges by selling forward US$ equal to the amount of expected 2009 sales with a two-year forward contract, its € cash flows net of variable costs obtained from North American sales would be fixed at the forward exchange rate prevailing at the end of November 2007, which is 1.47 $ per €. This would eliminate Porsche's currency risk.

c) If Porsche hedges by buying two-year European at-the-money put options on US$, its € cash flows net of variable costs obtained from North American sales would depend on the spot exchange rate financial statements prevailing at the end of November 2009. If the spot rate is higher than the strike rate of 1.45 $ per €, Porsche would exercise the put option and sell US$ at the strike rate, receiving more € than it would receive at the spot rate. If the spot rate is lower than the strike rate, Porsche would not exercise the put option and would receive less € than it would receive at the spot rate.

Learn more about financial statements here

brainly.com/question/14951563

#SPJ4

The correct option is D. A nation's GDP can be calculated as net domestic product minus depreciation.

A country's or countries' gross domestic product is a financial indicator of the market value or market value of all final goods and services produced and sold during a given period, typically without separately accounting for the intermediate goods and services utilized to make them.

Private consumption, gross domestic product, government investment, and other factors are added together to calculate GDP (exports – imports) . The national statistical bureau of the nation frequently calculates GDP using the international standard.

GDP is significant because it provides information on the size and health of an economy. Real GDP growth is frequently used as a stand-in for the overall health of the economy. Growth in real gross domestic product is frequently taken as a positive indicator of an expanding economy.

To learn more about GDP, click here:

https://brainly.com/question/30737857

#SPJ4

The PMI will automatically be dropped when Carrie's mortgage balance drops to $159,900.

Here's a step-by-step explanation:

1. Carrie bought the house for $205,000 and borrowed $195,000 from the bank.

2. The house is now worth $217,000.

3. PMI is usually dropped when the loan-to-value (LTV) ratio reaches 78% or lower.

4. To find the amount needed to reach 78% LTV, multiply the current value of the house by 0.78:

        $217,000 x 0.78 = $169,260.

5. Subtract the amount needed to reach 78% LTV from the original loan amount:

        $195,000 - $169,260 = $25,740.

6. Finally, subtract this amount from the original loan amount to get the mortgage balance when PMI will be dropped:

        $195,000 - $25,740 = $159,900.

Learn more about PMI here:

brainly.com/question/12462963

#SPJ11

Steps in the decision-making process include making a decision, gathering information, and evaluating viable solutions.

Why is it vital to make decisions?

Making management decisions is important since there may be moments when you must select from a variety of options that could have different effects on the workplace. They could have an effect on the workforce, other executives, or the standing of the business.

What does the ability to make decisions entail?

The ability to make decisions is a skill that encompasses all other abilities. Good decision-making skills allow a person to consider all the information.

To know more about Decision Making visit:

https://brainly.com/question/30697303

#SPJ1

The statement ''In a civil trial, the parties will not be aware of the documents that the other party has concerning the matter, until the trial itself '' is false.

This is becasue in a civil trial, both parties are required to disclose any relevant documents to each other through a process called "discovery" before the trial begins.

This ensures that both sides have access to the same evidence and can prepare their case accordingly. Failure to disclose relevant documents can result in severe consequences, including sanctions and adverse judgments.

Therefore, it is essential for parties to be aware of the documents that the other party has concerning the matter before the trial itself to ensure a fair and just trial.

For more questions like Documents click the link below:

https://brainly.com/question/24234591

#SPJ11

The maximum inventory of part number 78912 in Connor's Motor Manufacturing using a kanban system would be 660 units.

Kanban is a Japanese term that means "signboard" or "billboard". A kanban system is a lean manufacturing technique that emphasizes the just-in-time (JIT) production system. Kanban is a signal that prompts the production of the next batch of a product, which is then sent to the final assembly. In the manufacturing industry, kanban has been widely utilized to manage the production of materials and equipment.

In a kanban system, each part is identified by its own card, which displays the quantity of the item that is available. The kanban card contains information about the quantity of components required to construct the product and when to replenish the inventory. A typical kanban card includes information such as the product description, quantity, and destination of the product. When the inventory reaches a predetermined threshold, the kanban system issues a request for a replenishment order.

The maximum inventory for part number 78912 under Connor's Motor Manufacturing's kanban system would be calculated as follows:

Daily demand (D): 600 units
Lead time (L): 0.5 of a day
Safety stock factor (S): 1.10 (10% of daily demand)
Container size (C): 50 units

Maximum inventory = (D x L x S) + C = (600 x 0.5 x 1.10) + 50 = 660 units.

This maximum inventory refers to the highest amount of part number 78912 that can be stored in inventory in order to ensure that customer demand can be met without running out of stock. This amount is determined by the daily demand, the lead time (how long it takes to restock the inventory), the safety stock factor (the amount of inventory that must be kept on hand in order to cover unexpected spikes in demand) and the container size (the amount of product that can be held in each container).

By calculating the maximum inventory, Connor's Motor Manufacturing can be sure that their inventory is always at the optimal level to meet customer demand and avoid stock outs.

For more such questions on Kanban system.

https://brainly.com/question/22616012#

#SPJ11

The Service Value System (SVS) is the core of the ITIL framework and comprises of a set of interconnected activities, processes, and elements that work together to deliver value to customers through services.

It encompasses six key components: guiding principles, governance, service value chain, practices, continual improvement, and digital technology.

The Continuous Diagnostics and Mitigation (CDM) program meets the value chain for service in the SVS by providing a framework for securing government networks and systems.

CDM aligns with the SVS by incorporating the guiding principles of ITIL to establish a governance structure, define processes and practices, and continually improve the security of the government's digital infrastructure.

The CDM program follows the service value chain by identifying and addressing vulnerabilities in the government's systems, designing and implementing security solutions, and providing ongoing monitoring and response capabilities.

Overall, CDM aligns with the ITIL SVS to provide value to government customers through a comprehensive approach to cybersecurity.

For more questions like ITIL click the link below:

https://brainly.com/question/13187001

#SPJ11

The Service Value System is a set of interconnected activities that work together to deliver value to customers through IT-enabled services. It includes six components: the Service Value Chain, the Guiding Principles, Governance, Service Management Practices, Continual Improvement, and the ITIL Practices.

In accordance with ITIL, the Service Value Chain is the core of the Service Value System, consisting of six activities: Plan, Improve, Engage, Design and Transition, Obtain and Build, and Deliver and Support. Each activity is designed to create value for the customer by delivering high-quality services efficiently and effectively.

CDM, or Configuration and Data Management, plays a crucial role in the Service Value Chain as it supports the "Obtain and Build" and "Deliver and Support" activities. CDM ensures that all relevant configuration items and data are correctly identified, controlled, and maintained throughout the entire service lifecycle. This helps to ensure that the services delivered are of high quality and meet the needs of the customer.

Therefore, the CDM meets the value chain for service by contributing to the overall effectiveness and efficiency of the service delivery process, ensuring that the service provider can offer high-quality services that meet customer needs and expectations.

learn more about Service Value System here:

https://brainly.com/question/31001075

#SPJ11

The asset turnover ratio measures how effectively a company uses its assets. The correct option is c.

What is the asset turnover ratio?The asset turnover ratio is a financial ratio that compares a company's total revenue to its average total assets in order to measure how effectively the business is utilizing its assets to produce sales. It reflects a company's success at converting its assets into sales. The higher the asset turnover ratio, the more efficiently a company uses its assets to produce revenue.

A low asset turnover ratio, on the other hand, indicates that a company may be over-invested in assets and is unable to generate sufficient revenue to keep pace. As a result, it reflects the company's inefficiency in asset management.The formula for the asset turnover ratio is as follows:Asset Turnover Ratio = Revenue / Average Total Assets

Therefore, option C, how effectively a company uses its assets is the correct answer.

To know more about  asset turnover ratiorefer here:

https://brainly.com/question/28214599

#SPJ11

Primary Storage is the label attached to those repositories used for transactional data that are frequently accessed for business and clinical purposes.

Primary data storage used for transactional data that is frequently accessed for business and clinical purposes. It is typically used for storing data that is used for day-to-day operations such as customer orders, inventory management, and financial transactions. Primary storage systems are designed for high performance and low latency to support the high volume of transactional data generated by these types of operations.

Primary storage is typically located in close proximity to the applications that access it, allowing for fast access and retrieval of data. It is also designed to provide high availability and data protection features, such as redundancy and backups, to ensure that critical business data is always available and protected from loss or corruption.

Learn more about Primary Storage at:

https://brainly.com/question/232506

#SPJ1

a.  the purchase price of the bond is 10,080 and the coupon rate is 6%.

b. purchase price of the bond is 9,920 and the coupon rate is 6%.

c. the purchase price of the bond is 10,500 and the coupon rate is 6.67%.

Explanation:

A 30-year bond with face amount of 10,000 and a yield of i(2)=.08 has the following purchase price and coupon rate:

(a) The final entry in the amortization schedule for accumulation of discount is 80, so the purchase price of the bond is 10,080 and the coupon rate is 6%.

(b) The first entry in the amortization schedule for amortization of premium is 80, so the purchase price of the bond is 9,920 and the coupon rate is 6%.

(c) The final entry in the schedule for interest due is 500, so the purchase price of the bond is 10,500 and the coupon rate is 6.67%.

To learn more about amortization, refer below:

https://brainly.com/question/24232991

#SPJ11

1. The consideration transferred is P1,000,000. 2. Non-controlling interest in the acquire is P100,000. 3. The fair value of net identifiable assets acquired is P700,000.4. Goodwill is P200,000.

In this question, a 90% interest in PIT Inc. is acquired by BRAD Co. for P1,000,000. The recognized assets and liabilities of PIT Inc. have fair values of P1,600,000 and P900,000, respectively. Non-controlling interest is measured at fair value by ABC, and the fair value of NCI in PIT Inc. is not given.

No provision was recognized by PIT Inc. for the pending litigation, for which the fair value of settling is P40,000. The required values are given below:

1. Consideration transferred = P1,000,0002.

Non-controlling interest in the acquire = 90% x P1,600,000 x 10% = P100,000

3. Fair Value of net identifiable assets acquired =  P1,600,000 - P900,000 - (90% x P1,600,000 x 10%) = P700,000

4. Goodwill = P1,000,000 - (90% x P1,600,000) = P200,000

Learn more about Goodwill:

https://brainly.com/question/22428604

#SPJ11

Explanation:

she is on computer programer where she works with computer viruses and etc

Answer:

identifying transferable skills

Explanation: its useful in other jobs too

(a) Contribution margin in dollars, per unit, and as a ratio:

Using the given data, the contribution margin is calculated as follows:

Total sales revenue = 800 units × $30 = $24,000Variable costs (60% of sales) = 60/100 × $24,000 = $14,400

Contribution margin = Total sales revenue - Variable costs = $24,000 - $14,400 = $9,600

Contribution margin per unit = Contribution margin / Number of units sold= $9,600 / 800 units = $12

Contribution margin ratio = Contribution margin / Total sales revenue= $9,600 / $24,000 = 0.4 or 40%

The contribution margin is the revenue left over after variable costs have been deducted from total revenue. As a result, the contribution margin is the amount that may be applied to fixed costs and subsequently profit.

The contribution margin is computed by deducting variable costs per unit from the selling price per unit.

(b) Computing the break-even point in dollars and in units using the contribution margin technique:

The break-even point may be computed using the following formula:

Break-even point in units = Fixed costs / Contribution margin per unit= $7,200 / $12 = 600 units

Break-even point in dollars = Fixed costs / Contribution margin ratio= $7,200 / 0.4 = $18,000

Therefore, the break-even point for Nixon Company is 600 units or $18,000 in sales.

The break-even point is the number of units a company must sell in order to cover its fixed and variable costs. If the break-even point is achieved, the company will neither earn a profit nor incur a loss.

to know more about break-even point refer here:

https://brainly.com/question/15356272#

#SPJ11

The correct answer is debit Income Summary, $50,000; credit Retained Earnings, $50,000.

At the end of the period, the Income Summary account is used to close out the temporary accounts (revenues and expenses) and transfer the net income or loss to the Retained Earnings account.

In this case, the Finley Company has a net income of $50,000, so the entry to close the Income Summary account would be to debit Income Summary for $50,000 and credit Retained Earnings for $50,000. This transfers the net income to the Retained Earnings account and zeroes out the Income Summary account.

The other options are incorrect because they involve closing the Income Summary account to the Common Stock account, which is not correct. The Common Stock account is a permanent account and is not affected by the closing process. The Retained Earnings account is the correct account to transfer the net income or loss to at the end of the period.

For more about Income:

https://brainly.com/question/14732695

#SPJ11

According to the specific-factor model, if a country begins importing manufactured goods, labor will experience the highest unemployment.

The specific-factor model is an economic model that analyzes the distribution of income among land, labor, and capital in a country with two sectors (agriculture and manufacturing). It is determined by the specificity of factors of production, the mobility of factors of production across different sectors, and international trade. The model analyzes how trade affects the returns of factors of production and, as a result, the distribution of income.  

The land is used exclusively for agriculture. Labor is the only factor of production that can move freely between the two industries. Capital is only used in manufacturing, while land is only used in agriculture. In the model, trade affects the relative price of goods, as well as the allocation of factors of production, wages, and other economic variables.In the specific-factor model, if a country begins importing manufactured goods, labor will experience the highest unemployment. This is because imported goods decrease the demand for domestically produced goods, resulting in a reduction in the production of domestically manufactured goods.

The reduction in the manufacturing industry's output implies a decrease in the demand for capital, which reduces the capital's return, decreasing the price of capital. As a result, labor moves from the manufacturing sector to the agriculture sector, where the capital returns have not changed much. Because the manufacturing sector has contracted, there will be a surplus of labor, resulting in an increase in unemployment.

Hence, labor will experience the highest unemployment.

Learn more about "Specific-factor model"; https://brainly.com/question/15089057

#SPJ11

The company's cost of preferred stock for use in calculating the WACC is 10.42%

Price per share = $85.00

Annual dividend = $8.50

Flotation cost = 4.00% of the price paid by investors

The term WACC stands for a weighted average cost of capital. The cost of each type of capital (debt and equity) is calculated by the market value weight allocated to that source of capital, and the results are then added up to determine a firm's WACC.

Calculating the net proceeds -

Net Proceeds = Price - Flotation Cost

= 85.00 - 4.00% x 85.00

= 81.60

Calculating the cost of preferred stock -

Cost of Preferred Stock = Dividend / Net Proceeds

= $8.50 / $81.60

= 0.1042

or 10.42%

Read more about WACC on:

https://brainly.com/question/25566972

#SPJ4