approximately 1 ml of two clear, colorless solutions, 0.1 m mg(no3)2 and 0.1 m (nh4)2co3, were combined. upon mixing, a thick milky white precipitate formed. after centrifugation, the solution above the precipitate was found to be clear and colorless. based on the these observations, determine if a reaction occurred. if so, what is the net ionic equation for the reaction.

Five of the "big six" polymers undergo "addition" polymerization.

Monomeric units are chemically bound during condensation polymerization, a chemical process that takes place when water is removed.

One kind of nylon or polyamide is nylon 66, sometimes known variously as nylon 6-6, nylon 6-6, nylon 6,-6, or nylon 6:6. For the textile and plastic sectors, it and nylon 6 are the two most popular materials. Hexamethylenediamine and adipic acid, which give nylon 66 its name, are two monomers that each contain six carbon atoms.

To know more about polymerization visit:-

https://brainly.com/question/27354910

#SPJ11

The concept ideal gas equation is used here to determine the molar mass of the unknown gas. The ideal gas law is also known as the general gas equation and it is an equation of the state of a hypothetical ideal gas.

The ideal gas equation is developed as a result of the combination of the Boyles law, Charles's law and Avogadro's law. The ideal gas equation has several limitations.

The ideal gas law is:

PV = nRT

Number of moles = Given mass / Molar mass = m / M

99.0kpa = 0.977 atm

68.0 C = 341 K

72.5 cm³ = 0.0725 L

PV = m / M RT

0.977 × 0.0725 = 0.207 / M 0.0821 × 341

0.977 × 0.0725 = 5.795 / M

M = 82.78 g / mol

Thus the molar mass is 82.78 g / mol.

To know more about molar mass, visit;

https://brainly.com/question/30640134

#SPJ1

The heat released or absorbed during a phase change of water. Since the specific phase change and heat capacities are not mentioned, I'll provide a general step-by-step explanation using the terms "water" and "undergoes." The phase change Determine whether water undergoes melting, freezing, vaporization, or condensation.

The relevant heats of phase change heat of fusion or heat of vaporization. Convert grams to moles Divide the given mass of water 30.0 g by the molar mass of H2O 18.015 g/mol to find the number of moles (n). n = 30.0 g / 18.015 g/mol ≈ 1.67 moles Calculate the heat absorbed or released during the phase change Use the formula q = n × ΔH, where q represents heat, n is the number of moles calculated in Step 2, and ΔH is the heat of phase change fusion or vaporization provided in the problem. Determine the sign of the heat If the phase change is endothermic absorbing heat, such as melting or vaporization, the heat will be positive. If it's exothermic releasing heat, such as freezing or condensation, the heat will be negative. By following these steps, you can calculate the heat released or absorbed when water undergoes a phase change.

learn more about water here.

https://brainly.com/question/28465561

#SPJ11

The final temperature is 171.5 K and the work done per unit mass is 0.051 kJ/kg.

To solve this problem, we need to apply the First Law of Thermodynamics, which states that the change in internal energy of a system is equal to the heat added to the system minus the work done by the system:

ΔU = Q - W

Since the process is adiabatic, there is no heat transfer, so Q = 0. Therefore:

ΔU = -W

We also know that the process is reversible, which means that the gas can be considered to be in thermodynamic equilibrium at all times. This allows us to use the adiabatic relation between pressure, volume, and temperature:

[tex]$P_{1}V_{1}^{\gamma} = P_{2}V_{2}^{\gamma}$[/tex]

where γ is the ratio of the specific heats, which is given in the table as 1.66 for helium.

Since the process is steady-flow, we can assume that the mass flow rate is constant, which means that the work done per unit mass is equal to the total work done divided by the mass flow rate. Therefore:

[tex]$W/m = \int P, dV = \int \frac{P_{1}V_{1}^{\gamma}}{V^{\gamma}}, dV$[/tex]

Integrating this expression from [tex]V_1[/tex] to [tex]V_2[/tex], we get:

[tex]$W/m = \frac{P_{2}V_{2} - P_{1}V_{1}}{\gamma - 1}$[/tex]

Substituting the given values, we get:

[tex]$W/m = \frac{550 , \mathrm{kPa} \times 0.0266 , \mathrm{m}^{3}/\mathrm{kg} - 90 , \mathrm{kPa} \times 0.0266 , \mathrm{m}^{3}/\mathrm{kg}}{1.66 - 1} = 0.051 , \mathrm{kJ/kg}$[/tex]

Since ΔU = -W, we can use the ideal gas law to calculate the change in internal energy:

[tex]$\Delta U = U_{2} - U_{1} = C_{v,m} \times (T_{2} - T_{1}) = -W$[/tex]

where C_v,m is the specific heat at constant volume per unit mass, which is given in the table as 3.116 kJ/kg·K for helium.

Rearranging this expression and substituting the given values, we get:

[tex]$T_{2} = T_{1} - \frac{W}{C_{v,m} \ln \left(\frac{P_{2}}{P_{1}}\right)} = 30^\circ \mathrm{C} + \frac{0.051 , \mathrm{kJ/kg}}{3.116 , \mathrm{kJ/kg\cdot K} \times \ln \left(\frac{550 , \mathrm{kPa}}{90 , \mathrm{kPa}}\right)} = 171.5 , \mathrm{K}$[/tex]

To learn more about temperature

https://brainly.com/question/15267055

#SPJ4

1. The concentration of H2C6H6O6 is given as 0.0439 M. Assuming complete dissociation, the initial concentration of HC6H6O6- is also 0.0439 M. Therefore, [HC6H6O6-] = 0.0439 M.

2. The pH of the solution is 2.59.

C6H5COOH ⇌ H+ + C6H5COO-

Ka = [H+][C6H5COO-] / [C6H5COOH]

6.5 × [tex]10^{-5}[/tex]= [H+]² / 0.478

[H+] = 0.00255 M

Using the pH formula, we can then calculate the pH of the solution:

pH = -log[H+]

pH = -log(0.00255)

pH = 2.59

3. HCN + H2O ⇌ H3O+ + CN-

Ka = [H+][CN-] / [HCN]

4.9 × [tex]10^{-10}[/tex] = [H+]² / 0.563

[H+] = 1.57 × [tex]10^{-5}[/tex]M

Kw = [H+][OH-]

1.0 × [tex]10^{-14}[/tex] = (1.57 × [tex]10^{-5}[/tex])[OH-]

[OH-] = 6.37 × [tex]10^{-10}[/tex] M

Concentration refers to the amount of a substance that is present in a given volume or mass of another substance. It is a measure of the relative amount of solute present in a solution or mixture. The most common ways of expressing concentration in chemistry are molarity, molality, percent composition, and parts per million.

Molarity, denoted as M, is the number of moles of solute per liter of solution. Molality, denoted as m, is the number of moles of solute per kilogram of solvent. Percent composition is the mass of solute present in a solution expressed as a percentage of the total mass of the solution. Parts per million (ppm) is a measure of the concentration of a solute in a solution, expressed as the number of parts of the solute per million parts of the solution.

To learn more about Concentration visit here:

brainly.com/question/10725862

#SPJ4

Answer:16

Explanation:sorry if I'm incorrect

Elements from the six columns starting with column 3A and ending with column 8A make up the p-block, which is located on the right side of the periodic table.

Thus, The p-block does not include helium, which is located at the top of column 8A. The p-block is orange in the periodic table displayed below.

Because their valence electrons (or outermost electrons) reside in the p orbital, P-block elements are all related.

The six lobed geometries that make up the p orbital are uniformly spaced out from a central point. There are six columns in the p-block because the p orbital can only accommodate a maximum of six electrons.

Thus, Elements from the six columns starting with column 3A and ending with column 8A make up the p-block, which is located on the right side of the periodic table.

Learn more about p block, refer to the link:

https://brainly.com/question/28864428

#SPJ1

The antacid tablet neutralized 0.000563 moles of HCl.

The balanced chemical equation for the reaction between HCl and aluminum hydroxide (the active ingredient in antacids) is:

Al(OH)₃ + 3HCl → 3H₂O + AlCl₃

From the equation, we can see that each mole of aluminum hydroxide (Al(OH)₃) can neutralize 3 moles of HCl.

To find the moles of HCl neutralized by the antacid tablet, we first need to calculate the moles of NaOH used in the titration. We can do this using the equation:

moles NaOH = Molarity x Volume (in liters)

First, we need to convert the volume of NaOH used in the titration from milliliters to liters:

8.45 mL = 8.45/1000 = 0.00845 L

Now we can plug in the values to find the moles of NaOH:

moles NaOH = 0.20 M x 0.00845 L = 0.00169 moles

Since the reaction between NaOH and HCl is a 1:1 reaction, we know that 0.00169 moles of NaOH neutralized the same number of moles of HCl. Therefore, the moles of HCl neutralized by the antacid tablet can be calculated using the mole ratio from the balanced equation:

1 mole of Al(OH)₃ : 3 moles of HCl

0.00169 moles of NaOH x (1 mole of HCl / 1 mole of NaOH) x (1 mole of Al(OH)₃ / 3 moles of HCl) = 0.000563 moles of Al(OH)₃

So, the antacid tablet neutralized 0.000563 moles of HCl.

Learn more about antacids at https://brainly.com/question/28285654

#SPJ11

The statement "Mass is conserved during a chemical reaction" means that the total mass of the reactants (the substances that undergo a chemical change) is equal to the total mass of the products (the new substances formed as a result of the chemical change).

A chemical reaction is a process in which one or more substances, known as reactants, are transformed into one or more new substances, known as products, through the breaking and forming of chemical bonds. Chemical reactions are a fundamental part of chemistry and occur all around us, from the food we eat to the fuel we burn.

Chemical reactions are represented by chemical equations that show the reactants on the left-hand side and the products on the right-hand side. The coefficients in front of the reactants and products indicate the relative amounts of each substance involved in the reaction. There are several types of chemical reactions, including synthesis, decomposition, single replacement, double replacement, and combustion reactions.

To learn more about Chemical reaction visit here:

brainly.com/question/29762834

#SPJ4

The general anode efficiency rating of zinc is 80%. Zinc is commonly used as an anode material in cathodic protection systems because of its high electrochemical potential, which makes it more reactive than the metal it is protecting. When a zinc anode is installed, it corrodes instead of the protected metal.

This process is called sacrificial corrosion, and it helps to prevent the protected metal from corroding by sacrificing the anode. The efficiency of the anode is determined by the amount of corrosion it undergoes during this process. In the case of zinc, its efficiency rating is typically around 80%. This means that 80% of the anode's content is loaded onto the metal it is protecting, while the remaining 20% is lost to the environment. Overall, zinc is an effective and commonly used material for cathodic protection systems.

learn more about zinc here.

https://brainly.com/question/13890062

#SPJ11

An anemometer measures the velocity of airflow.

To learn more about velocity click here:

https://brainly.com/question/24259848

#SPJ11

The set of enzymes that catalyze reversible reactions of fermentation and transfer a hydride ion from NADH is option C, which includes pyruvate decarboxylase and alcohol dehydrogenase.

Enzymes catalyze chemical reactions by lowering the activation energy required for the reaction to occur, making it easier for the reactants to convert to products. In the case of fermentation, enzymes are responsible for the breakdown of glucose into energy in the absence of oxygen. Reversible reactions of fermentation can proceed in either direction, depending on the availability of substrates and products. The transfer of a hydride ion from NADH is a crucial step in the process of fermentation, as it helps to regenerate NAD+ for use in further rounds of glucose breakdown. Pyruvate dehydrogenase and α-ketoglutarate dehydrogenase are enzymes involved in the citric acid cycle and do not catalyze reversible reactions of fermentation. Lactate dehydrogenase is involved in the conversion of pyruvate to lactate, but does not transfer a hydride ion from NADH. Therefore, option C is the correct answer to the question.

Learn more about alcohol dehydrogenase here-

https://brainly.com/question/30418229

#SPJ11

The formal charge on N in the cation [H₂NSF₂]⁺ is +1.

To determine the formal charge of an atom in a molecule or ion, we need to compare the number of valence electrons in the free atom to the number of electrons around the atom in the molecule or ion. The formal charge of an atom can be calculated using the formula:

Formal charge = (number of valence electrons in the free atom) - (number of lone-pair electrons) - (number of bonds)

In the given cation [H₂NSF₂]⁺, the central N atom is bonded to two H atoms, one S atom, and one F atom. Each H atom contributes one valence electron to the bonding, S contributes 6 valence electrons, F contributes 7 valence electrons, and N contributes 5 valence electrons.

Therefore, the number of valence electrons around N is (2+6+7)=15. The N atom also has one lone pair of electrons. Hence the formal charge on N can be calculated as:

Formal charge = 5 - 2 - (1/2)(4) = +1

The positive formal charge on N indicates that it has lost one electron and has a deficient octet. However, the octet rule is not violated as there are still eight electrons around N (six from the bonds and two from the lone pair).

To know more about formal charge, refer here:
https://brainly.com/question/11723212#
#SPJ11

The molarity is given as 0.80 M

Molarity will be solved using

M = moles of solute / volume of solution in liters

0.30 moles of NaCl (sodium chloride) dissolved in 377 mL of solution.

You should First, convert the volume of the solution from milliliters (mL) to liters (L):

377 mL × (1 L / 1000 mL) = 0.377 L

Next we have to put the values we have in the formula

M = 0.30 moles / 0.377 L ≈ 0.80 M

Therefore the molarity is given as 0.80 M

Read more on molarity here:https://brainly.com/question/14469428

#SPJ1

The most common Portable Reference Electrode used on land not near seawater is the Standard Calomel Electrode (SCE).

The SCE is a stable and reliable reference electrode that is commonly used in laboratory and industrial settings for various electrochemical measurements. It consists of a mercury electrode and a saturated potassium chloride solution containing mercury(I) chloride (Hg2Cl2), which serves as the reference half-cell. The SCE has a potential of +0.241 V versus the standard hydrogen electrode (SHE) and is widely used for measuring the potentials of other electrodes and electrochemical systems.

Learn more about  electrochemical here:

https://brainly.com/question/31606417

#SPJ11

The average molecular mass of the gas, the average distance between the molecules, and the average speed of the molecules will all decrease when the sample of ideal gas is cooled from 50.0oC to 25.0oC in a sealed container of constant volume.

Here correct option is I.

This is due to the fact that the cooled gas molecules will have less energy and thus less kinetic energy to move around and interact with each other.

This decrease in energy results in a decrease in the average speed of the molecules, and thus a decrease in the average distance between them. Since the average distance between the molecules is reduced, the average molecular mass of the gas will also decrease.

The decrease in average speed of the molecules is due to the decrease in temperature of the gas. As the temperature decreases, the average kinetic energy of the molecules decreases, causing them to move slower.

This decrease in kinetic energy results in a decrease in the average speed of the molecules, and thus a decrease in the average distance between them. As the average distance between the molecules decreases, the average molecular mass of the gas will also decrease.

In conclusion, when a sample of an ideal gas is cooled from 50.0oC to 25.0oC in a sealed container of constant volume, the average molecular mass of the gas, the average distance between the molecules, and the average speed of the molecules will all decrease.

This is due to the fact that the cooled gas molecules have less energy and thus less kinetic energy to move around and interact with each other.

Know more about kinetic energy here

https://brainly.com/question/26472013#

#SPJ11

In organic and other advanced labs, it is important to ensure proper safety measures are taken when working with chemicals.

In this context, glove material must be selected carefully based on the chemicals in use. While nitrile gloves offer adequate protection for a wide range of chemicals, it is essential to verify their compatibility with the specific substances being handled in the lab. Latex gloves may not always be preferred over nitrile gloves due to potential allergies and varying levels of chemical resistance. Lastly, "double-gloving" can be employed as a precautionary measure, but its necessity depends on the risk associated with the specific chemicals and procedures being used.

To learn more about chemicals click here https://brainly.com/question/29240183

#SPJ11

The phenylmethanol is typically reacted with potassium manganate in a reaction vessel or flask equipped with a condenser to allow for reflux during the oxidation reaction.

To react phenylmethanol with potassium manganate, you can use a round-bottom flask as the apparatus. Here's a step-by-step explanation:
1. Add phenylmethanol to a round-bottom flask.
2. Add an aqueous solution of potassium manganate to the flask.
3. Stir the mixture to ensure proper mixing of the reactants.
4. Monitor the reaction, as the potassium manganate oxidizes the phenylmethanol.
Remember to follow safety protocols and wear appropriate personal protective equipment while performing the reaction.

To learn more about potassium manganate click here https://brainly.com/question/25070246

#SPJ11

A ceiling level is a level that is not to be exceeded at any time.

A ceiling level refers to the maximum concentration of a substance that should never be surpassed in the given environment, such as a workplace or laboratory, to ensure safety and prevent any harmful effects.This indicates that regardless of the length of time, a worker exposed to a concentration greater than the CEV may experience health impacts. This exposure cap is closely adhered to for chemicals and biological agents that might have long-term negative impacts on health.

To learn more about concentration, click here:

https://brainly.com/question/12674058

#SPJ4

A. The unpaired electron in the outer shell of the compound CH3 makes it a free radical species and extremely reactive.

A species known as a free radical is one that has an unpaired electron in its outer shell, making it highly reactive and capable of taking part in chemical processes that can be both good and bad. A free radical is represented by the symbol •. Only A is an option from the list. The existence of an unpaired electron is indicated by the presence of the symbol for •CH3:. So, •CH3 is a type of free radical. Free radicals play a role in a number of biological and chemical processes, including immunological response, oxidative damage, and cell signalling.

learn more about free radical  here:

https://brainly.com/question/29422803

#SPJ11

Monterey is generally colder than Virginia Beach.

Monterey is located on the central coast of California and is influenced by a cool, marine climate due to its proximity to the Pacific Ocean. Virginia Beach, on the other hand, is located in the southeastern part of Virginia and has a humid subtropical climate with hot summers and mild winters.

The average annual temperature in Monterey is around 57°F (14°C), with average winter temperatures ranging from 43-59°F (6-15°C) and average summer temperatures ranging from 52-67°F (11-19°C). In Virginia Beach, the average annual temperature is around 60°F (15°C), with average winter temperatures ranging from 33-50°F (1-10°C) and average summer temperatures ranging from 70-85°F (21-29°C).

Overall, Monterey tends to have cooler temperatures throughout the year compared to Virginia Beach. However, it's worth noting that temperatures can vary widely depending on the time of year and specific weather patterns, so it's always best to check local forecasts when planning a trip.

To know more about the Virginia Beach, here

https://brainly.com/question/22068242

#SPJ1

There is an inversion of stereochemistry, which implies a back-side attack of the nucleophile as in SN₂ reaction the nucleophile attacks opposite from the side of the leaving group.

SN2 (Substitution Nucleophilic Bimolecular) reactions occur when a nucleophile attacks an electrophilic carbon atom and substitutes a leaving group. In SN₂ reactions, the nucleophile attacks from the opposite side of the leaving group, which causes the stereochemistry at the reaction center to invert.
The size of the anion can affect the nucleophilicity due to solvation, with larger anions being less suppressed by solvation.

Additionally, smaller anions may be more solvated by ion-dipole forces.

However, these factors do not directly influence the stereochemical outcome of the SN₂ reaction.

Learn more about stereochemistry : https://brainly.com/question/13266152

#SPJ11

Stereochemistry refers to the spatial arrangement of atoms in molecules. When looking at molecules in Marvin View, it  evident that changes in stereochemistry can greatly impact the three-dimensional structure of the molecules.

In the case of monosaccharides, two examples that differ most in their three-dimensional structure are D-glucose and D-fructose. These differences arise due to variations in the configuration of their functional groups and the arrangement of atoms in space.

The Suzuki reaction affects the stereochemistry of the starting components in a way that preserves the stereochemistry of the vinyl boronic acid and vinyl halide.

Certain substances include two stereogenic centres or more. The stereochemistry that results depends on whether or not those centres are equivalent. Equivalent sterogenic centres have similar sets of substituents.

For every  non-equivalent centres, there are 2n stereoisomers. Some enantiomer pairings are included in these isomers. Due to the opposite configuration in each centre, these stereoisomers are mirror reflections of one another. All stereoisomers are also diastereomers.

Learn more about stereochemistry here

https://brainly.com/question/28658912

#SPJ11

The correct formula equation for the reaction between lead (II) nitrate and potassium iodide is:

Pb(NO3)2(aq) + 2KI(aq) → PbI2(s) + 2KNO3(aq)

This is a double displacement reaction where the lead (II) cation (Pb2+) from lead (II) nitrate switches places with the iodide ion (I-) from potassium iodide to form solid lead iodide (PbI2) and aqueous potassium nitrate (KNO3).

It's important to note that lead (II) nitrate and potassium iodide are both soluble in water and dissociate into their respective ions (Pb2+, NO3-, K+, and I-) when mixed. However, when these ions combine, they form an insoluble compound (PbI2) that precipitates out of the solution, causing a visible color change.

This reaction can also be used to test for the presence of either lead (II) or iodide ions in a solution. If precipitate forms when lead (II) nitrate and potassium iodide are mixed, it indicates the presence of both ions in the solution. If no precipitate forms, it means that neither lead (II) nor iodide ions are present.

It's important to handle lead (II) nitrate with care as it is toxic and can cause harm if ingested or inhaled. Similarly, potassium iodide can be harmful in large doses and should be used with caution.

Learn more about double displacement here:

https://brainly.com/question/29307794

#SPJ11

Photochemical smog is a type of air pollution that occurs primarily in congested areas with high motor vehicle traffic (option d).This smog is created when sunlight reacts with certain pollutants, such as nitrogen oxides and volatile organic compounds, which are released from vehicles and industrial processes.

Here's a step-by-step explanation of how photochemical smog forms:
1. Motor vehicles release nitrogen oxides (NOx) and volatile organic compounds (VOCs) into the atmosphere.
2. These pollutants react with sunlight, initiating a complex series of chemical reactions.
3. This reaction process generates ozone (O3) and other secondary pollutants, which contribute to the formation of smog.
4. The smog accumulates in areas with high traffic and limited air circulation, such as urban centers, leading to reduced visibility and negative health impacts.
In summary, photochemical smog is a type of air pollution that predominantly forms in congested areas with high motor vehicle traffic, as sunlight reacts with pollutants released from vehicles. It is essential to reduce motor vehicle emissions and promote alternative transportation options to mitigate the formation of photochemical smog and its negative impacts on the environment and human health.

learn more about photochemical smog Refer: https://brainly.com/question/30832437

#SPJ11

Based on the analysis of the unknown substance, which showed it has a high boiling point, is brittle, is an insulator as a solid, and conducts electricity when melted, the substance with these characteristics is SiF₄ (Silicon tetrafluoride).

The analysis showed that it has a high boiling point, which is a characteristic of compounds with strong intermolecular forces. SiF₄ is a covalent compound with a tetrahedral structure, and the F atoms strongly attract the electrons from Si, resulting in a polar covalent bond. The polar nature of the Si-F bond and the tetrahedral structure leads to a high boiling point. Additionally, SiF₄ is brittle, which is a characteristic of covalent compounds. It is an insulator as a solid because it does not have free electrons to conduct electricity, but it can conduct electricity when melted because the Si-F bonds break, and the F atoms become free to move and conduct electricity.

Learn more about insulators at https://brainly.com/question/1472743

#SPJ11

Classify each of the following amino acids as polar or nonpolar. assume that they are at physiological pH. drag the appropriate items to their respective bins. Polar Aspartate (Asp) Nonpolar Methionine (Met), Leucine (Leu)

To classify the given amino acids as polar or nonpolar at physiological pH, we need to consider the properties of their side chains. The amino acids provided are Methionine (Met), Leucine (Leu), and Aspartate (Asp).

1. Methionine (Met) has a nonpolar side chain containing a sulfur atom. Hence, it is nonpolar.
2. Leucine (Leu) has an aliphatic nonpolar side chain, so it is nonpolar as well.
3. Aspartate (Asp) has a carboxyl group in its side chain, which ionizes at physiological pH, making it polar.

So, the classification is as follows:
Polar: Aspartate (Asp)
Nonpolar: Methionine (Met), Leucine (Leu)

Learn more about amino acids https://brainly.com/question/14351754

#SPJ11

Scientists are still working to completely comprehend a number of events. Here are a few instances:

A type of stuff known as "dark matter" is invisible to telescopes because it does not emit, absorb, or reflect light. Its gravitational effects on observable matter have implied its existence, but its nature and makeup are still unknown.

Scientists are still working to fully understand the phenomenon of consciousness, or the individual's subjective experience of awareness. There is no commonly accepted theory that explains how subjective experience results from physiological processes in the brain, despite advances in identifying the neurological correlates of consciousness.

Despite being a widely accepted scientific theory, quantum mechanics' consequences and interpretations are still controversial.

Learn more about Quantum mechanics, here:

https://brainly.com/question/11855107

#SPJ1

A. The number of atoms of I on the left is 2 and on the right is 2

B. The number of atoms of Na on the left is 4 and on the right is 4

C. The number of atoms of S on the left is 4 and on the right is 4

D. The number of atoms of O on the left is 6 and on the right is 6

E. Yes, the equation is balanced

A balanced equation is an equation in which the atoms of the element on the left hand side (i.e reactants) is equal to the atoms of the element on the right hand side (i.e products)

Now lets us answer the questions given above:

I₂ + 2Na₂S₂O₃ -> 2NaI + Na₂S₄O₆

A. The number of atoms of I

Number of atoms on the left = 2

Number of atoms on the right = 2

B. The number of atoms of Na

Number of atoms on the left = 4

Number of atoms on the right = 4

C. The number of atoms of S

Number of atoms on the left = 4

Number of atoms on the right = 4

D. The number of atoms of O

Number of atoms on the left = 6

Number of atoms on the right = 6

E. From the above illustration, we can see that the number of atoms of each element are the same on both sides of the equation.

Thus, the equation is balanced

Learn more about balancing equation:

https://brainly.com/question/12192253

#SPJ1

The three types of convergent plate boundaries are ocean-ocean, ocean-continent, and continent-continent.

A zone where two or more tectonic plates converge is referred to as a convergent border. The land inside the boundary area is altered as a result. In areas where convergent borders exist, earthquakes and volcanic eruptions are highly common.

Depending on the type of crust that is present on either side of the boundary—oceanic or continental—convergent borders, where two plates are moving toward one another, can be classified into one of three categories. Mountains and mountain ranges are created when two continental plates collide, pulling up the rock at the boundary and crumpling and folding it.

To know about convergent plate

https://brainly.com/question/15115188

#SPJ4