An experiment is conducted to determine the thermal conductivity of a hot dog. First water is boiled in a large pan and measured to have a temperature of 94°c (at an elevation of 1650 m). The hot dog has dimensions of 12. 5 cm long and 2. 2 cm in diameter

a) There are 0.23 seconds in which the ball is in the air.

b) 11.74 meters per second is the ball's initial horizontal speed.

A body's velocity is defined as the rate at which its displacement alters over time. Having both magnitude and direction, velocity is a vector quantity.

A body's velocity is defined as the rate at which its displacement alters over time.

The point is 1.0 meters tall vertically.

The ball rolled across a horizontal distance of 2.7 meters.

(H/2g) is the length of time the ball has been in the air.

= √(1.0/2×9.8)

is 0.23 seconds

b) The ball travels at an initial horizontal velocity of = 2.7 m/0.23 s.

= 11.74 m/s.

a) There are 0.23 seconds in which the ball is in the air.

b) 11.74 meters per second is the ball's initial horizontal speed.

To read more about velocity refer to:

brainly.com/question/18084516

#SPJ1

The light collecting area of the 100-m telescope will be 100 times the light collecting area of the 10-meter keck telescope.

Given the diameter of first telescope (d1) = 100m

The diameter of Keck telescope (d2) is = 10m

We know that the light collecting area of a telescope is represented as:

A = πD^2/4 where D is the diameter f telescope.

A1/A2  =  πd1^2/πd2^2

A1/A2 = 100 x 100 / 10 x 10 such that A1/A2 = 100

A1 = 100A2

It represents that the light collecting area of the 100-m telescope will be 100 times the light collecting area of the 10-meter keck telescope.

To learn more about light click here https://brainly.com/question/16317768

#SPJ4

When each charge experiences electrostatic force of magnitude 82.0 N and the separation between them is 0.270 m. Then q1 is 3.5 x 10^-9 C

and q2 is 6.65 x 10^-9 C.

The electrostatic force between two charges is given by Coulomb's law:

F = k x q1 x q2 / r^2

where F is the electrostatic force, q1 and q2 are the charges, r is the distance between the charges, and k is Coulomb's constant (8.99 x 10^9 N x m^2/C^2).

We know that:

F = k x q1 x q2 / r^2 = 82.0 N

r = 0.270 m

And the total charge of the system is 70.0 μC = 70.0 x 10^-6 C

We can use these equations to find the values of q1 and q2. First, we can use the equation for the electrostatic force to find the product of the two charges:

q1 x q2 = F x r^2 / k = 82.0 x (0.270)^2 / (8.99 x 10^9)

Next, we can use the equation for the total charge to find the sum of the two charges:

q1 + q2 = 70.0 x 10^-6

Now we have two equations and two unknowns. We can use these equations to find q1 and q2.

Solving for q1 and q2, we get:

q1 = 3.5 x 10^-9 C

q2 = 6.65 x 10^-9 C

q1 and q2 are the charges on the point charges.

To know more about force please refer: https://brainly.com/question/13191643

#SPJ4

Answer:  Man will stay in air in 0.83 sec.

What is speed ?

--Speed is defined as.

--The rate of change of position of an object in any direction.

--Speed is measured as the ratio of distance to the time in which the distance was covered.

--A body that moves with constant acceleration means that it moves in "a uniformly --accelerated movement", which means that if the velocity is plotted with respect to time we will find a line and its slope will be the value of the acceleration, it determines how much it changes the speed with respect to time.

When performing a mathematical demonstration, it is found that the equations that define this movement are as follows.

Vf=Vo+a.t                                     (1)

{Vf^{2}-Vo^2}/{2.a} =X                (2)

X=Xo+ VoT+0.5at^{2}                   (3)

X=(Vf+Vo)T/2                                 (4)

Where

Vf = final speed

Vo = Initial speed

T = time

A = acceleration

X = displacement

In conclusion to solve any problem related to a body that moves with constant acceleration we use the 3 above equations and use algebra to solve

To solve this problem we must divide it in tow parts, the first is when the springbok accelerates upwards with 35m / S ^ 2, the objective of the first part is to find the final speed using equation number 2

Part 1

Vo=0

a= 35 m/s2

x=0.7m

{Vf^{2}-Vo^2}/{2.a} =X  

solving for Vf

, the final velocity of part 1 is the initial velocity of movement 2, and the acceleration  is the gravity = -9.81m / s ^ 2.

we use the ecuation number tow(2)

Vo=7m/s

a=g=-9.81m/S^2

Vf=0m/s

{Vf^{2}-Vo^2}/{2.a} =X  

{0^{2}-(7)^2}/{2.(-9.81)} =X  

X=2.5m

finally the distance traveled is the sum of the distances of part 1 and 2

object in air 0.83 sec.

Learn more about velocity from https://brainly.com/question/13273624.

#SPJ4

The angle at which ball should be thrown so that runner will catch it just before it hits the ground depends on several factors, such as the distance between the thrower and runner, speed of the runner, speed of the ball, and the height of runner's catch.

To maximize the chances of the runner catching the ball, it should be thrown at an angle that is slightly above horizontal and that allows ball to travel the greatest distance possible while still giving the runner enough time to reach ball's landing point.

To determine the angle at which the ball should be thrown, following information is needed:

Distance between the thrower and the runner, Speed of the runner, Speed of the ball and Height of the runner's catch

To know more about projectile motion, refer

https://brainly.com/question/10680035

#SPJ4

The final kinetic energy of the electron is K2 = K1/4 since it is moving one-quarter as fast. The work done on the electron can be found using the equation W = K2 - K1 = K1/4 - K1 = -3/4K1. So, W=-3/4K1

The velocity of an object is directly proportional to its kinetic energy. As the velocity of an object increases, so does its kinetic energy. This relationship is described by the equation K = 1/2 * m * v^2, where K is the kinetic energy, m is the mass of the object and v is its velocity. This equation shows that the kinetic energy of an object is proportional to the square of its velocity. This means that if the velocity of an object is doubled, its kinetic energy will increase by a factor of four. Conversely, if the velocity of an object is halved, its kinetic energy will decrease by a factor of four.

To know more about Electron visit: https://brainly.com/question/1255220

#SPJ4

After a net amount of work W has been done on it, the electron is moving one-quarter as fast in the opposite direction W in terms of K1 =  W= -3/4K1

The final kinetic energy of the electron is K2 = K1/4 since it is moving one-quarter as fast.

The work done on the electron can be found using the equation

                                W = K2 - K1

                           = K1/4 - K1

                                 = -3/4K1.

So, W= -3/4K1

The velocity of an object is directly proportional to its kinetic energy. As the velocity of an object increases, so does its kinetic energy. This relationship is described by the equation K = 1/2 × m × v², where K is the kinetic energy, m is the mass of the object and v is its velocity.

This equation shows that the kinetic energy of an object is proportional to the square of its velocity. This means that if the velocity of an object is doubled, its kinetic energy will increase by a factor of four. Conversely, if the velocity of an object is halved, its kinetic energy will decrease by a factor of four.

Learn more about kinetic energy :

brainly.com/question/25959744

#SPJ4

Answer:

The mass has gained a height of 5 meters.

Explanation:

To calculate the height gained by a 2kg mass when 100J of gravitational energy is transferred to it, we can use the equation:Height (h) = Gravitational Potential Energy (GPE) / Weight (w)where GPE = mgh (mass x acceleration due to gravity x height)Therefore,h = (100 J) / (2 kg x 10 N/kg)h = 5 metersThe mass has gained a height of 5 meters.

The ratio of the friction force to the normal force that a body travelling over a dry, uneven surface experiences is known as the kinetic friction coefficient (k).

To learn more about kinetic friction coefficient (k) refer to:

https://brainly.com/question/20241845

#SPJ4

The easiest way to extract the electric field from a big sheet of charge is to use a cylindrical gaussian surface. Charges and their arrangements, such as in capacitors and battery cells, produce electric fields.

The easiest way to extract the electric field from a big sheet of charge is to use a cylindrical Gaussian surface. Calculating the flux through the surface is simple since the cylinder-shaped surface encloses the sheet of charge and the electric field lines are parallel to the axis of the cylinder. The symmetry of the cylindrical surface also makes it simple to calculate the electric field. If the cylindrical Gaussian surface is selected to be sufficiently big in comparison to the size of the sheet, the edge effects can be disregarded. Charges and their arrangements, such as in capacitors and battery cells, produce electric fields.

learn more about electric field here:

https://brainly.com/question/8971780

#SPJ4

No, it is not possible for you to travel from Earth to Andromeda in your lifetime.

Andromeda is a constellation located in the northern sky. It is named after the princess Andromeda in Greek mythology, who was chained to a rock as an offering to a sea monster.

To travel this distance in 20 years, you would need to travel at a speed of 0.99999999999999999c (where c is the speed of light). This is impossible, as nothing can travel faster than the speed of light.
The time it takes for the one-way trip to Andromeda as measured in the Earth-linked frame is 2.01 x 10^6 years. As measured in the rocket frame, this trip would take slightly longer due to time dilation effects caused by the high speed of the rocket. The rocket speed on Trip 1 as measured in the Earth-linked frame would be 0.00049975c, which is a decimal fraction of the speed of light.
For Trip 2, if we set the rocket time for the one-way trip to 20 years, then our speed would be 0.99999999999999999c as a decimal fraction of the speed of light. This is impossible, as nothing can travel faster than the speed of light.

To learn more about Andromeda
https://brainly.com/question/23844295
#SPJ4

The distance from the launch point to the plate is x = 0/v = 0/√3.5 x 10-15 = 0, meaning that the launch point must be at the same point as the plate.

Kinetic energy is the energy of motion. It is the energy associated with the movement of an object or particle, and is defined as the work needed to accelerate the object to its current velocity. Kinetic energy is a form of energy that is always associated with the movement of an object, regardless of its speed or direction. It is calculated by multiplying the mass of the object by the square of its velocity. Kinetic energy exists in both living and non-living objects, and is a key factor in the behavior of these objects.

The distance between the launch point and the plate can be determined using the formula for kinetic energy, which is E = ½mv². To solve for the distance, we rearrange the equation to v² = 2E/m and then plug in the given values: v² = 2(1.6 x 10-17)/(9.11 x 10-31) = 3.5 x 10-15. Then, using the equation x = vt, we solve for the distance x, where t is the time it takes for the electron to reach the plate. Since the electron needs to come to a complete stop, we set the velocity equal to zero. Thus, the distance from the launch point to the plate is x = 0/v = 0/√3.5 x 10-15 = 0, meaning that the launch point must be at the same point as the plate.

To know more about kinetic energy click-
https://brainly.com/question/25959744
#SPJ4

FALSE: An atomic-scale object with a negative charge. It is consisting of three subatomic particles, Neutrons, Protons, and Electrons, and is the smallest particle known is a "incorrect" statement.

Any of the multiple self-contained units like substance or energy that make up the building blocks of all matter are considered subatomic particles, also known as elementary particles.

Thus, an atomic-scale object with a negative charge. It is consisting of three subatomic particles, Neutrons, Protons, and Electrons, and is the smallest particle known is a "incorrect" statement.

To know more about the subatomic particle, here

https://brainly.com/question/28306590

#SPJ4

The complete question is-

A subatomic particle that carries a negative charge. It is the smallest particle made up of three subatomic particles, Neutrons, Protons, and Electrons. (TRUE/ FALSE)

physical science worksheet conservation of energy based on this formula. ME=GPE + KE.

What is meant by energy ?

1m/sr = GPE = 85

            KE= 7J

            ME=155

10m/sr  GPE = 15J

            KE= 05J

            ME=155

To learn more about energy refer to

brainly.com/question/13881533

#SPJ4

The real world examples of a transverse wave is: Sound waves, Vibrations on guitar strings, Clapping.

A transverse wave is a wave whose oscillations are perpendicular to the wave's advance direction. In contrast, a longitudinal wave moves in the direction of its oscillations. A transverse wave is an example of one. Transverse wave motion occurs when all points on a wave oscillate along paths that are perpendicular to the wave's advance direction. A progressive wave is a transverse wave. A transverse wave's propagation direction is always perpendicular to its vibration direction. A vacuum can only carry a few types of transverse waves. A transverse wave is something like an electromagnetic wave or a light wave.

Here,

Sound waves, vibrations on guitar strings, and clapping are all real-world examples of transverse waves.

To know more about transverse wave,

https://brainly.com/question/13863548

#SPJ1

The magnitude of the total electric field produced by the two objects at point p is 4*k*qa/0.25 m^2.

Electric field is a physical quantity used to describe the strength and direction of an electric force on a charged particle. It is a vector field, meaning that it has both a magnitude and a direction associated with it.

The total electric field at point p is the vector sum of the electric fields produced by object a and object b.
The electric field produced by each object at point p is given by:
E = k*q/r^2
where k is the Coulomb constant, q is the charge of the object, and r is the distance from the object to point p.
Therefore, the electric field produced by object a is:
Ea = k*qa/ra^2
And the electric field produced by object b is:
Eb = k*qb/rb^2
Since the charges of a and b are the same, we can use the same value for qa and qb. We can also use the same value for k.
Therefore, the total electric field at point p is:
E = Ea + Eb = k*qa/ra^2 + k*qb/rb^2
Substituting in the values given in the question:
E = k*qa/(0.250 m)^2 + k*qa/(0.500 m)^2
Simplifying gives:
E = 4*k*qa/0.25 m^2
Therefore, the magnitude of the total electric field produced by the two objects at point p is: E = 4*k*qa/0.25 m^2.

To learn more about electric field
https://brainly.com/question/14372859
#SPJ4

The total mechanical energy of the pendulum can be divided into potential energy and kinetic energy.

At the maximum height, the kinetic energy is 0 and all the energy is potential energy.

Therefore, the maximum height (h) can be calculated using the equation: h = (PE/m) / g = (75/5) / 10 = 1.5 m.

The rate of a pendulum at its maximum height is same to 0. At this factor, all the pendulum's overall mechanical electricity is in the shape of gravitational capacity strength. Because the pendulum swings down, the ability power is converted into kinetic electricity, achieving a maximum price at the lowest of its swing in which its pace is finest. On the most peak, the pendulum has no pace and consequently no kinetic energy, however its ability strength is at its most fee. For this reason, the speed of a pendulum at its most height is inversely proportional to its general mechanical strength.

To know more about Pendulum visit: https://brainly.com/question/29702798

#SPJ4

The maximum height reached by the pendulum is 15 meters.

Potential energy is a type of energy that an object possesses as a result of its position or configuration in a force field. It is energy stored in an object due to its height above a reference point, its state of compression or tension, or the arrangement of its constituent parts. Potential energy is relative to a reference point and is dependent on the strength of a particular force field. For example, the potential energy of an object on the edge of a cliff is related to the object's height above the ground, and the potential energy of a stretched spring is related to the amount it is stretched or compressed. The potential energy of an object can be converted into other forms of energy, such as kinetic energy, when the object is released or otherwise allowed to move in the force field.

To find the maximum height reached by a pendulum, we need to know the initial potential energy of the system, which is given by the equation:

PE = mgh

where m is the mass of the pendulum (5.0 kg), g is the acceleration due to gravity (10 m/s2), and h is the height.

Since the total mechanical energy of the system is given (75 J), we can set this equal to the initial potential energy:

75 J = 5.0 kg * 10 m/s2 * h

Solving for h, we find:

h = 75 J / (5.0 kg * 10 m/s2) = 15 m

So the maximum height reached by the pendulum is 15 meters.

To know more about energy visit:

https://brainly.com/question/28727910

#SPJ4

Despite being several streets away from the rail yard, the current downtown noise level is 70 dB. The people is given assurances by the mayor that they will see a difference.

The power carried via sound per unit area inside a perpendicular direction to the that region is known as sound intensity or acoustic intensity. A watt every square meter (W/m2) is indeed the SI unit for intensity, which also covers sound intensity.

The following equation can be used to calculate sound intensity: I=Δp22ρvw. p stands for pressure change or amplitude. is the density of the substance through which the sound is moving, and vw is the sound's measured speed. The more intense the acoustic waves oscillation, the bigger.

TO KNOW MORE ABOUT OSCILLATION VISIT:

https://brainly.in/question/14329100

#SPJ1

The average velocity is 47.96 mi/h with which Jason can drive

on average.

Well, there are many ways to calculate the average velocity, but the most complete one would be the following.

With the equations of Uniform Rectelinear Movement we can obtain the distance Jason has driven. We will use the same equation for each step.

where x is the position,  is the initial position (which we can pick as zero to simplify), v is the velocity, t is time and  is the initial time (also picked as zero). In order to get the right answer we must use the same units, so we will change the minutes to hours, where 30 minutes are half an hour and 12 minutes are 0.2 hours

So, the distance will be Now that we have the partial distances, we use the formula for average velocity which is where  is the final position (the sum of the distances) and  is the total time Jason took.

Learn more about the distance and speed here:

https://brainly.com/question/12759408

#SPJ4

Option B, EA is the surface's electric flux. Due to the fact that the electric flux is defined as the electric field times the surface area it traverses.

The electric flux can be calculated as EA because the surface area is known and the electric field strength is constant.

Electric flux is a measurement of the strength of an electric field flowing through a specific surface. It is calculated by dividing the electric field's strength by the surface area through which it passes.

If the surface area is known and the electric field magnitude is constant in this situation, finding the electric flux can be done by simply multiplying these two numbers.

EA is the mathematical abbreviation for this, where A denotes the surface area and E is the electric field.

To learn more about electric flux at

https://brainly.com/question/30267804?referrer=searchResults

#SPJ4

The question is -

(A) An electric field of constant magnitude is tangent everywhere to a curved surface of area . What is the electric flux through the curved surface?

a) Zero

b) EA

c) –EA

d) 2EA

e) Not enough information

The gravitational potential energy that have been gained by the body is 150 J.

Now, we have to look at the fact that the gravitational potential energy of the object would depend on the position of the object that is placed in space. We know that the acceleration due to gravity would depend on the position of the object also in the universe.

Then, we can be able to obtain the gravitational potential energy that has been gained from;

E = mgh

E = energy

m = mass

g = acceleration due to gravity

h = height

Thus we have;

E = 2 * 25 * 3

= 150 J

Learn more about energy:https://brainly.com/question/19768887

#SPJ1

What is Electric Field?

-- Electric field, an electric property associated with each point in space when charge is present in any form.

--The magnitude and direction of the electric field are expressed by the value of E, called electric field strength or electric field intensity or simply the electric field..

What is electric force ?

-- The repulsive or attractive interaction between any two charged bodies is called as electric force.

--  Similar to any force, its impact and effects on the given body are described by Newton's laws of motion.

-- The electric force is one of the various forces that act on objects.

Learn more about potential from https://brainly.com/question/49140

#spj4

The force felt by the larger test charge would be twice as large as the force felt by the original test charge.

This is because the force felt by a test charge in an electric field is directly proportional to the magnitude of the test charge. The electric field is a vector field and the force experienced by a test charge is given by the product of the charge of the test particle and the electric field at that point.

So, when the magnitude of the test charge is doubled, the force experienced is also doubled. Therefore, if a test charge of magnitude twice as large as the original test charge were placed at point a, it would feel twice the force that the original test charge felt when it was placed at that same point.

For more questions like Test charge click the link below:

brainly.com/question/30123250

#SPJ4

The amount of time taken in seconds for the bulb to transfer 300 J of energy into light energy is 37.5 seconds. (300 J / ( 12 W * 0.8))

The efficiency of a lightbulb is a measure of how much of the energy it consumes is converted into light energy, and how much is wasted as heat. A lightbulb with a higher efficiency will convert a greater proportion of the energy it consumes into light energy, and will therefore produce more light for the same amount of energy consumed. Conversely, a lightbulb with a lower efficiency will convert a smaller proportion of the energy it consumes into light energy, and will therefore produce less light for the same amount of energy consumed. The efficiency of a lightbulb is usually represented as a percentage, with 100% indicating that all the energy consumed is converted into light energy, and 0% indicating that none of the energy consumed is converted into light energy.

To know more about Light Energy visit: https://brainly.com/question/9444330

#SPJ4

The amount of time taken in seconds for the bulb to transfer 300 J of energy into light energy is 37.5 seconds.

Power = 12W

Efficiency = 80%

Energy = 300 J

Time taken =   (300 J / ( 12 W * 0.8))

                                  = 37.5 seconds

The efficiency of a lightbulb is a measure of how much of the energy it consumes is converted into light energy, and how much is wasted as heat. A lightbulb with a higher efficiency will convert a greater proportion of the energy it consumes into light energy, and will therefore produce more light for the same amount of energy consumed.

Conversely, a lightbulb with a lower efficiency will convert a smaller proportion of the energy it consumes into light energy, and will therefore produce less light for the same amount of energy consumed. The efficiency of a lightbulb is usually represented as a percentage, with 100% indicating that all the energy consumed is converted into light energy, and 0% indicating that none of the energy consumed is converted into light energy.

Learn more about Light Energy :

brainly.com/question/9444330

#SPJ4

The moment of inertia of the pendulum about the pivot point is [tex]0.385 kg*m^2[/tex]

A physical pendulum in the form of a planar object moves in simple harmonic motion when it oscillates about a pivot point, and the frequency of oscillation is determined by the moment of inertia of the pendulum about the pivot point.

The frequency of oscillation of the pendulum is given as 0.450 Hz. The moment of inertia of the pendulum I can be calculated using the equation:

[tex]I = m * L^2[/tex]

where m is the mass of the pendulum and L is the distance from the pivot point to the center of mass.

In this case, the mass of the pendulum is 2.20 kg and the distance from the pivot point to the center of mass is 0.350 m, so the moment of inertia is:

[tex]I = 2.20 kg * (0.350 m)^2 = 0.385 kg*m^2[/tex]

So, the moment of inertia of the pendulum about the pivot point is [tex]0.385 kg*m^2[/tex]

To learn more about the moment of inertia:

https://brainly.com/question/14460640

#SPJ4

The moment (in KN-m) produced by the force about an axis in the direction of i+j+k (from the origin) if a force of 5 KN to a wall is 5 (cos θ + sin θ)

That is called torque when we calculate its moment of force. Torque is а meаsure of the force thаt cаn cаuse аn object to rotаte аbout аn аxis. Just аs force is whаt cаuses аn object to аccelerаte in lineаr kinemаtics, torque is whаt cаuses аn object to аcquire аngulаr аccelerаtion.

We are given:

Force = 5 KN

Horizontal Component i = [tex]F_{x}[/tex] = 5 cos θ

Vertical Component j =  [tex]F_{y}[/tex] = 5 sin θ

x component of the moment (in kN-m):  

M = [tex]F_{x}[/tex] × d

= 5 cos θ × d (kN - m)

d is the distance of the force form origin.

Force about an axis in the direction of i + j + k:

=  [tex]F_{x}[/tex] +  [tex]F_{y}[/tex] +  [tex]F_{z}[/tex]

= 5 cos θ + 5 sin θ + 0

= 5 (cos θ + sin θ)

Your question is incomplete, but most probably your full question can be seen in the Attachment.

For more information about torque refers to the link:

https://brainly.com/question/29024338

#SPJ4

The position of the point charge q can be placed such that the net electrostatic force is -1.857 m.

To find the position where the net electrostatic force on the charge q is zero, we need to apply Coulomb's Law. Coulomb's law states that the electrostatic force between two charges is proportional to the product of the charges and inversely proportional to the square of the charges. distance between them.

In this case, we have two charges Q1 and Q2 at known positions and we need to find the position of the third charge q such that the net force is zero.

By equating the force due to Q1 with the force due to Q2, we can solve for the position of q. Changing the sign of Q2 changes the direction of the force on q and changes the position of q.

To learn more about the electrostatic force at

https://brainly.com/question/9774180?referrer=searchResults

#SPJ4

The question is -

An electric point charge of Q1 = 7.43 nC is placed at the origin of the real axis. Another point charge of Q2 = 1.21 nC is placed at a position of p = 3.95 m on the real axis. At which position can a third point charge of q = -1.99 nC be placed so that the net electrostatic force on it is zero? Let the sign of Q2 be changed from positive to negative. At which position can the point charge q be placed now so that the net electrostatic force on it is zero?

Speed is a measure of how far an object travels in a given amount of time. In this example, the speed is 60 miles per hour.

Speed is the rate at which an object moves in a given amount of time. It is an important measure of the rate of motion, and can be expressed in many different units including meters per second, miles per hour, kilometers per hour, and more. Speed is the magnitude component of velocity, which is the vector quantity that describes both the speed and direction of an object. Speed is a scalar quantity, meaning that it has magnitude or size but no direction associated with it. In physics, speed is typically measured with the use of a speedometer or other instrument to detect the rate at which an object is moving.

To learn more about Speed
https://brainly.com/question/4931057
#SPJ1

(a) The shape of the sampling distribution of (pc - pa) is normal ,(b) The mean of the sampling distribution of (pc - pa) is 15% and The standard deviation of the sampling distribution 0.051.

(a) The shape of the sampling distribution of (pc - pa) is normal. This is because the sample proportions of red jelly beans from the Child and Adult mixes are generated from independent random samples of jelly beans, and the Central Limit Theorem states that the sampling distribution of a sample proportion will be approximately normal when the sample size is large.

(b) The mean of the sampling distribution of (pc - pa) is 15%. This is because the expected proportion of red jelly beans in the Child mix is 30%, while the expected proportion of red jelly beans in the Adult mix is 15%. Thus, the difference in the expected proportions is 15%.

(c) The standard deviation of the sampling distribution of (pc - pa) can be calculated as follows:

Standard Deviation = sqrt((pchild*(1-pchild))/nchild + (padult*(1-padult))/nadult)

= sqrt((0.30*(1-0.30))/50 + (0.15*(1-0.15))/100)

= sqrt(0.021 + 0.0045)

= 0.051

To know more about sampling here

https://brainly.com/question/13287171

#SPJ4

Answer: 3

Explanation: i think

the Magnitude of the electric field at the center of the square has four-point charges lying on the vertices of a square with side length. two adjacent vertices have charge while the other two have charge will be q1/([tex]\sqrt{2\\}[/tex]Πε[[tex]x^{2}[/tex]+[tex]1^{2}[/tex][tex]]^{3/2}[/tex].

Lets all the 4 charges have the charge of q1 (two with the same charge and the other two with another charge) so E1 (Electric field) will be

E1 =2Ecosθ = 2kq/[[tex]x^{2}+1^{2}[/tex]]^3/2 along AC; E2 = 2Ecosθ = 2kq/[[tex]x^{2}+1^{2}[/tex]]^3/2  along DB

so E1⊥E2. The net field will be adding both the electric field

E0 = [tex]\sqrt{E1^{2} +E2^{2} }[/tex] = 2[tex]\sqrt{2}[/tex]kql/[[tex]x^{2}+1^{2}[/tex]]^3/2

=>  q1/([tex]\sqrt{2\\}[/tex]Πε[[tex]x^{2}+1^{2}[/tex]]^3/2

Which is the resultant of the electric field of all four charges on the vertexes of the square.

Learn more about electric Fields: https://brainly.com/question/14372859

#SPJ4