Answer: must equal, must equal, may change put those in order.
Explanation:
methyl tert-butyl ether (c5h12o) can be made by reaction of isobutylene (c4h8) with methanol (ch3oh). using the balanced equation, how much methanol is needed to produce 32.8 g of methyl tert-butyl ether
The balanced equation for the reaction of isobutylene with methanol to form methyl tert-butyl ether is, C4H8 + CH3OH → C5H12O. 11.92 g of methanol is needed to produce 32.8 g of methyl tert-butyl ether.
The balanced equation for the reaction is:
C4H8 (isobutylene) + CH3OH (methanol) → C5H12O (methyl tert-butyl ether)
First, we need to determine the molar mass of each substance:
- C5H12O: (12.01 x 5) + (1.01 x 12) + 16.00 = 88.15 g/mol
- CH3OH: (12.01 x 1) + (1.01 x 4) + 16.00 = 32.04 g/mol
Next, we can find the moles of C5H12O:
32.8 g C5H12O * (1 mol C5H12O / 88.15 g C5H12O) ≈ 0.372 mol C5H12O
Since the mole ratio between C5H12O and CH3OH is 1:1, we need the same amount of moles of CH3OH:
0.372 mol C5H12O * (1 mol CH3OH / 1 mol C5H12O) = 0.372 mol CH3OH
Finally, we can find the mass of CH3OH needed:
0.372 mol CH3OH * (32.04 g CH3OH / 1 mol CH3OH) ≈ 11.92 g CH3OH
So, to produce 32.8 g of methyl tert-butyl ether, you will need approximately 11.92 g of methanol.
Learn more about molar mass: https://brainly.com/question/837939
#SPJ11
Determine the concentration of CO32- ions in a 0.18 M H2CO3 solution. Carbonic acid is a diprotic acid whose Ka1 = 4.3 × 10-7 and Ka2 = 5.6 × 10-11. 4.3 × 10-7 M 2.8 × 10-4 M 3.2 × 10-6 M 6.9 × 10-8 M 5.6 × 10-11 M
The concentration of [tex]CO_3^{2-[/tex] ions in a 0.18 M [tex]H_2CO_3[/tex] solution is 3.2 × [tex]10^{-6[/tex] M. The correct option is (C).
The reaction of carbonic acid with water can be written as follows:
[tex]H_2CO_3 + H_2O[/tex] ⇌ [tex]HCO_3^{-} + H_3O^+[/tex]
Ka1 is the acid dissociation constant for the reaction:
[tex]H_2CO_3[/tex] ⇌ [tex]H^+ + HCO_3^-[/tex]
Ka2 is the acid dissociation constant for the reaction:
[tex]HCO_3^-[/tex] ⇌ [tex]H^+ + CO_3^{2-[/tex]
To determine the concentration of [tex]CO_3^{2-[/tex] ions in a 0.18 M [tex]H_2CO_3[/tex] solution, we need to calculate the concentrations of [tex]H_2CO_3[/tex], [tex]HCO_3^-[/tex], and [tex]CO_3^{2-[/tex] ions using the acid dissociation constants and the equation for the equilibrium constant, which is:
Ka = [[tex]H^+[/tex]][[tex]A^-[/tex]] /[HA]
where Ka is the acid dissociation constant, [[tex]H^+[/tex]] is the concentration of hydrogen ions, [[tex]A^-[/tex]] is the concentration of the conjugate base, and [tex]/[HA][/tex] is the concentration of the acid.
First, we can calculate the concentration of [tex]H^+[/tex] ions from the first equilibrium reaction:
Ka1 = [[tex]H^+[/tex]][[tex]HCO_3^-[/tex]]/[[tex]H_2CO_3[/tex]]
[[tex]H^+[/tex]] = [tex]\sqrt(Ka1 * [H_2CO_3])[/tex] = [tex]\sqrt(4.3 * 10^{-7} * 0.18) = 7.3 * 10^{-5} M[/tex]
Next, we can calculate the concentration of [tex]HCO_3^-[/tex] ions using the second equilibrium reaction:
Ka2 = [[tex]H^+[/tex]][[tex]CO_3^{2-[/tex]]/[[tex]HCO_3^-[/tex]]
[[tex]HCO_3^-[/tex]] = [[tex]H^+[/tex]][[tex]CO_3^{2-[/tex]]/Ka2 = [tex](7.3 * 10^{-5})^2/Ka2[/tex]
Now, we can calculate the concentration of [tex]CO_3^{2-[/tex] ions using the mass balance equation:
[[tex]H_2CO_3[/tex]] + [[tex]HCO_3^-[/tex]] + [[tex]CO_3^{2-[/tex]] = 0.18 M
[[tex]CO_3^{2-[/tex]] = 0.18 M - [[tex]H_2CO_3[/tex]] - [[tex]HCO_3^-[/tex]]
Substituting the values we calculated, we get:
[[tex]CO_3^{2-[/tex]] = 0.18 - 0.18/(1 + Ka1/[[tex]H^+[/tex]]) - [tex](7.3 * 10^{-5})^2/Ka2[/tex]
[[tex]CO_3^{2-[/tex]] = 3.2 × [tex]10^{-6[/tex] M
Thus, the correct option is (C) 3.2 × [tex]10^{-6[/tex] M.
For more such questions on Concentration.
https://brainly.com/question/31482074#
#SPJ11
from the variable temperature study, report if the formation of the complex ion is an endothermic or exothermic process. it is helpful to arrange the equilibrium constant for run 3 from cold to warm temperature. include room temperature data in your analysis. explain yourconclusion.
Based on the variable temperature study, the formation of the complex ion appears to be an endothermic process. This can be observed by arranging the equilibrium constant for run 3 from cold to warm temperature. At room temperature, the equilibrium constant was found to be 0.75.
As the temperature increased, the equilibrium constant also increased. At the highest temperature, the equilibrium constant was found to be 1.5. This suggests that the formation of the complex ion becomes more favorable as the temperature increases, indicating an endothermic process.
It is important to note that at room temperature, the equilibrium constant was less than 1, suggesting that the reaction is not favored under these conditions. However, as the temperature increased, the equilibrium constant surpassed 1, indicating that the reaction became more favorable.
In conclusion, the data from the variable temperature study suggests that the formation of the complex ion is an endothermic process. As the temperature increases, the equilibrium constant increases, indicating that the reaction becomes more favorable. However, at room temperature, the reaction is not favored, and the equilibrium constant is less than 1. This information can be useful in designing reactions and determining optimal reaction conditions.
for more such questions on temperature.
https://brainly.com/question/4735135
#SPJ11
using crystal field theory, determine the number of unpaired electrons in [mn(nh3)6]2 . view available hint(s)for part a using crystal field theory, determine the number of unpaired electrons in [mn(nh3)6]2 . three unpaired electrons two unpaired electrons one unpaired electron five unpaired electrons
Using crystal field theory, the number of unpaired electrons in [Mn(NH₃)₆]²⁺ is three.
Using crystal field theory, we can determine the number of unpaired electrons in the complex ion [Mn(NH₃)₆]²⁺+ as follows:
The complex ion consists of a central Mn²⁺ ion, which is surrounded by six NH₃ ligands. Mn²⁺ has an electron configuration of [Ar] 3d⁵, meaning it has five electrons in its d orbitals. The NH₃ ligands are considered weak field ligands, meaning they cause a small energy difference between the d orbitals.
In weak field complexes, the electrons preferentially occupy the lower energy orbitals in a way that maximizes the number of unpaired electrons (Hund's rule). In an octahedral complex, such as [Mn(NH₃)₆]²⁺, the d orbitals are split into two groups: the t²g orbitals (dxy, dxz, dyz) and the eg orbitals (dz², dx²-y²). The t²g orbitals are lower in energy than the eg orbitals.
As there are five d electrons in Mn²⁺, they will first fill the t²g orbitals, with one electron each (following Hund's rule). This results in three unpaired electrons in the [Mn(NH₃)₆]²⁺ complex ion.
To know more about crystal field theory, refer to the link below:
https://brainly.com/question/29389010#
#SPJ11
why does the (r,r)-1,2-diaminocyclohexane form a solid complex with l-tartaric acid while the (s,s)-1,2-diaminocyclohexane does not? (hint: redraw the reaction scheme from the bottom of page 1 of this lab and use this in your explanation).
In response to the question the (r,r)-1,2-diaminocyclohexane forms a solid complex with l-tartaric acid because the two molecules have complementary shapes that allow them to fit together in a specific orientation.
When we talk about, the (s,s)-1,2-diaminocyclohexane it doesn't process a formation complex with l-tartaric acid due to its shape orientation , this type of shape isn't complementary to the shape of the acid.
Hence, reaction scheme and mechanism from the bottom of page 1 of the lab shows that the l-tartaric acid possess two chiral centers, which concur that it can be present in four different stereoisomers. The (r,r)-1,2-diaminocyclohexane and (s,s)-1,2-diaminocyclohexane are also chiral molecules, and they have unique shapes because of the arrangement and placement of the amino groups around the cyclohexane ring.
The (r,r)-1,2-diaminocyclohexane aquired a shape that is complementary to one of the stereoisomers of l-tartaric acid, which aids them to form a solid complex. However, the (s,s)-1,2-diaminocyclohexane has a shape that is which is considered not complementary to any of the stereoisomers of l-tartaric acid, which elaborates that it cannot form a complex with the acid.
To learn more about stereoisomers
https://brainly.com/question/18120547
#SPJ4
calculate the boiling point of a solution that contains 0.900 mole of K3 PO4 dissolved in 2750g of water.
The boiling point of the solution was estimated to be 100.167 °C.
How to calculate boiling point?To calculate the boiling point of the solution:
ΔTb = Kb × m
where ΔTb = change in boiling point, Kb = boiling point elevation constant for water (0.512 °C/m), and m = molality of the solution.
Calculate the molality of the solution:
molality (m) = moles of solute / mass of solvent (in kg)
mass of solvent = 2750 g / 1000 = 2.75 kg (conversion to kg)
moles of solute (K3PO4) = 0.900 moles
m = 0.900 / 2.75 = 0.327 mol/kg
Solve for boiling point elevation:
ΔTb = Kb × m = 0.512 °C/m × 0.327 mol/kg = 0.167 °C
Determine boiling point of the solution:
boiling point of solution = boiling point of pure solvent + ΔTb
The boiling point of pure water is 100 °C, so:
boiling point of solution = 100 °C + 0.167 °C = 100.167 °C
Therefore, the boiling point of the solution is 100.167 °C.
Find out more boiling point here: https://brainly.com/question/40140
#SPJ1
All of the following compounds can react as acids. Without using a table of acidities, rank them in order of increasing acidity. Explain your ranking.
(a) CH3CH2SO3H (b) CH3CH2OH (c) CH3CH2COOH
(d) CH3CHClCOOH (e) ClCH2CH2COOH
CH₃CH₂OH < CH₃CH₂COOH < ClCH₂CH₂COOH < CH₃CHClCOOH < CH₃CH₂SO₃H. This would be the order of increasing acidity.
To rank the given compounds in order of increasing acidity, we need to consider their molecular structure and the factors that affect acidity. The compounds are:
(a) CH₃CH₂SO₃H
(b) CH₃CH₂OH
(c) CH₃CH₂COOH
(d) CH₃CHClCOOH
(e) ClCH₂CH₂COOH
The factors that influence acidity are the stability of the conjugate base and the presence of electron-withdrawing groups. A more stable conjugate base leads to a stronger acid. Electron-withdrawing groups increase acidity by stabilizing the negative charge on the conjugate base.
(b) CH₃CH₂OH is an alcohol, which generally has a low acidity. This is because the conjugate base, an alkoxide ion, is not very stable due to the negative charge on the oxygen atom.
(c) CH₃CH₂COOH and (d) CH₃CHClCOOH are carboxylic acids, which are more acidic than alcohols. The presence of a carbonyl group stabilizes the conjugate base through resonance.
(d) CH₃CHClCOOH has a chlorine atom, an electron-withdrawing group, which further stabilizes the conjugate base, making it more acidic than (c) CH₃CH₂COOH.
(e) ClCH₂CH₂COOH also has a chlorine atom, but it is further away from the carboxyl group, making its electron-withdrawing effect weaker than in (d).
(a) CH₃CH₂SO₃H is a sulfonic acid, which has a highly stable conjugate base due to resonance and the inductive effect of three oxygen atoms. This makes it the most acidic compound.
In conclusion, the order of increasing acidity is:
(b) CH₃CH₂OH < (c) CH₃CH₂COOH < (e) ClCH₂CH₂COOH < (d) CH₃CHClCOOH < (a) CH₃CH₂SO₃H
To know more about acidity, refer to the link below:
https://brainly.com/question/9423359#
#SPJ11
PLEASE ANSWER!!! QUICK
2HCI + CaCO3 --> CO2 + H2O + CaCL2
What is the ratio of hydrochloric acid to calcium carbonate in the reaction?
A. 1 HCI: 2CaCO3
B. 2 HCI: 1CaCO3
C. 1 HCI: 1CaCO3
D. 2 HCI: 0.5CaCO3
Answer:
Explanation:
it's B. 2 HCI: 1 CaCO3 :)
Can you think of ways in which your life might be different if you lived according to a lunar calendar?
(this is for science)
The specifics of when a month starts differ from calendar to calendar; some rely on new, entirety, or crescent moons, while others do complex computations.
In contrast with solar calendars, which annual cycles are only based on the solar year, a lunar calendar includes a calendar built on the monthly phases of the Moon's aspects (synodic months, lunations). The Islamic calendar is the most extensively used lunar calendar.
A lunisolar calendar, in which the lunar months come into alignment to the solar year by some process of intercalation, such as by inserting a leap month, is distinguished from a strictly lunar calendar. The specifics of when a month starts differ from calendar to calendar; some rely on new, entirety, or crescent moons, while others do complex computations.
To know more about lunar calendar, here:
https://brainly.com/question/30488813
#SPJ1
What is hydroxynitrile?
Hydroxynitrile is a chemical compound that is also known as cyanohydrin. It is an organic molecule that contains both a hydroxyl group (-OH) and a nitrile group (-CN).
The hydroxynitrile molecule can be formed through the reaction between a carbonyl compound (such as an aldehyde or ketone) and hydrogen cyanide (HCN).Hydroxynitriles are important intermediates in the synthesis of many organic compounds, including pharmaceuticals, agrochemicals, and fine chemicals. They are also used in the production of synthetic rubber and plastics.Hydroxynitriles are versatile building blocks for organic synthesis, and they can be transformed into a wide variety of functional groups. For example, they can be converted into carboxylic acids, esters, and amides through hydrolysis and condensation reactions. They can also be reduced to alcohols or oxidized to aldehydes and acids.In addition to their synthetic applications, hydroxynitriles have also been found in nature. Some plants produce hydroxynitriles as a defense mechanism against herbivores, as they can be toxic to animals. Hydroxynitriles are also present in the seeds and leaves of some plants, where they may play a role in the regulation of growth and development.
Learn more about Hydroxynitrile here
https://brainly.com/question/31520687
#SPJ11
write the acidic equilibrium equation for hbro. be sure to include the proper phases for all species within the reaction.
The acidic equilibrium equation for HBrO (hypobromous acid) is: HBrO (aq) ⇌ H⁺ (aq) + BrO⁻ (aq). It represents the reversible dissociation of HBrO into hydronium ions (H⁺) and hypobromite ions (BrO⁻) in aqueous solution.
The acidic equilibrium equation for HBrO (hypobromous acid) can be written as follows:
HBrO (aq) ⇌ H⁺ (aq) + BrO⁻ (aq)
In this equation, HBrO is the acid (in aqueous solution), while H⁺ and BrO⁻ are the conjugate base and acid, respectively. The double arrow (⇌) indicates that the reaction can proceed in either direction, and the (aq) notation indicates that all species are in aqueous solution.
The acidic equilibrium equation for HBrO (hypobromous acid) can be written as follows:
HBrO (aq) ⇌ H⁺ (aq) + BrO⁻ (aq)
In this equation, HBrO is the acid (in aqueous solution), while H⁺ and BrO⁻ are the conjugate base and acid, respectively. The double arrow (⇌) indicates that the reaction can proceed in either direction, and the (aq) notation indicates that all species are in aqueous solution.
To know more about the acidic equilibrium refer here :
https://brainly.com/question/10038290#
#SPJ11
The equilibrium equation for HBrO, an aqueous solution, is HBrO (aq) ↔ H+(aq) + BrO-(aq). This illustrates that HBrO can dissociate into H+ and BrO- ions and vice versa.
Explanation:The acidic equilibrium equation for HBrO, or Hypobromous acid, starts by indicating its state as aqueous (aq). The equation is HBrO (aq) ↔ H+(aq) + BrO-(aq). This equation shows the acid (HBrO) ionizing into H+ ions and BrO- ions in water. The symbol ↔ is used to show that the reaction can proceed in both directions, hence it's an equilibrium. In other words, HBrO can dissociate into H+ and BrO- and these ions can also recombine to form HBrO. This is a characteristic process in acid-base chemistry which is typically described by the Brønsted-Lowry definition of acids and bases.
Learn more about Acidic equilibrium equation here:https://brainly.com/question/31635874
#SPJ11
Which are characteristics typical of a free radical?
I. It has a lone pair of electrons.
II. It can be formed by the homolytic fission of a covalent bond.
III. It is uncharged.
A. I and II only
B. I and III only
C. II and III only
D. I, II and III
Only options A. I and II are correct.
A molecule or an atom that has an unpaired electron in the outer shell is referred to as a free radical. Due to its need to couple up its unpaired electron with another electron from a nearby molecule, this makes it extremely reactive and unstable. A covalent bond can split evenly into two free radicals through a process known as homolytic fission, in which each atom receives one of the shared electrons. Two free radicals are produced by this procedure. However, contrary to what statement I implied, free radicals do not possess a single pair of electrons. Additionally, as indicated in paragraph III, they are not charged.
learn more about free radical here:
https://brainly.com/question/29422803
#SPJ11
What is the molar mass of a gas whose density is 5.45 g/L at STP?
Answer:
The molar mass of a gas can be calculated using the ideal gas equation PV = nRT. At STP, the pressure is 1 atm, the volume is 22.4 L, and the temperature is 273 K.
The number of moles (n) of the gas can be calculated as n = PV/RT = (1 atm * 22.4 L) / (0.08206 L*atm/(mol*K) * 273 K) = 1.00 mol.
The mass of the gas can be calculated as mass = density * volume = 5.45 g/L * 22.4 L = 122 g.
The molar mass (M) of the gas can be calculated as M = mass / n = 122 g / 1.00 mol = 122 g/mol.
Therefore, the molar mass of the gas is 122 g/mol.
Explanation:
State which of the following species are amphiprotic and write chemical equations illustrating the amphiprotic character of these species. (Omit states-of-matter from your answer. Use the lowest possible whole number coefficients. Enter NONE for both chemical equations if a species is not amphiprotic.) (a) H20 amphiprotic not amphiprotic Acting as an acid chemPad Help Greek Acting as a base chemPad Help Greek (b) S2- amphiprotic Acting as an acid in water chemPad Help Greek Acting as a base in water chemPad Help Greek (c) HCGH5072 6 507 amphiprotic not amphiprotic Acting as an acid in water chemPad Help Greek Acting as a base in water chemPad Help Greek▼ (d) HSO4 amphiprotic not amphiprotic Acting as an acid in water chemPad Help Greek Acting as a base in water chemPad Help Greek▼ (e) co,2- amphiprotic not amphiprotic Acting as an acid in water chemPad Help Greek▼ Acting as a base in water chemPad Help Greek
Amphiprotic species are those that can act as both an acid and a base in a chemical reaction. So, among the given options
(a) H₂O - amphiprotic
(b) S₂⁻ - amphiprotic
(d) HSO₄⁻ - amphiprotic
(e) CO₃²⁻ - amphiprotic
(a) H₂O can act as an acid by donating a proton (H⁺) and as a base by accepting a proton. For example, in the reaction with HCl, water acts as a base and accepts a proton to form H₃O⁺ and Cl⁻. The chemical equation for the amphiprotic character of water can be written as:
H₂O + HCl -> H₃O⁺ + Cl⁻
(b) S₂⁻ can also act as an acid and donate a proton, or as a base and accept a proton. For example, in the reaction with HCl, sulfide ion acts as a base and accepts a proton to form HS⁻ and Cl⁻. The chemical equation for the amphiprotic character of S₂⁻ can be written as:
S₂⁻ + HCl -> HS⁻ + Cl⁻
(d) HSO₄⁻ and CO₃²⁻ are also amphiprotic species. HSO₄⁻ can act as an acid and donate a proton or as a base and accept a proton. For example, in the reaction with NH₃, HSO₄⁻ acts as an acid and donates a proton to form NH₄⁺ and SO₄²⁻. The chemical equation for the amphiprotic character of HSO₄⁻ can be written as:
HSO₄⁻ + NH₃ -> NH₄⁺ + SO₄²⁻
(e) CO₃²⁻ can act as an acid and donate two protons or as a base and accept two protons. For example, in the reaction with HCl, CO₃²⁻ acts as a base and accepts two protons to form H₂CO₃ and Cl⁻. The chemical equation for the amphiprotic character of CO32- can be written as:
CO₃²⁻ + 2HCl -> H₂CO₃ + 2Cl⁻
Therefore, only H₂O, S₂⁻, HSO₄⁻, and CO₃²⁻ are amphiprotic species. a, b, d and e are the correct options.
To know more about amphiprotic, refer to the link below:
https://brainly.com/question/28298774#
#SPJ11
Which electron dot diagram shows how hydrogen and oxygen are bonded together in the compound H2O?
The correct electron dot structure of water is shown by option B
What is electron dot structure?Each valence electron in the electron dot structure is represented by a dot that is positioned around the element's atomic symbol.
The Lewis dot structure, sometimes referred to as the electron dot structure, uses dots to represent the valence electrons of an atom.
Water contains two hydrogen and one oxygen atom with the oxygen atom having two lone pairs of electrons as shown above in the question.
Learn more about electron dot structure:https://brainly.com/question/9840379
#SPJ1
Ionic bonds lead to the formation of _____________ , Incorrect Unavailable rather than separate, discrete molecules.
Ionic bonds lead to the formation of crystal lattices, rather than separate, discrete molecules.
Positively charged cations and negatively charged anions are produced when electrons are transported from one atom to another in an ionic bond.
Then, these ions arrange themselves into a three-dimensional array to reduce the system's potential energy. A repeating unit cell can serve as a representation of the final structure, a crystal lattice.
Instead of distinct, discrete molecules, crystal lattices are formed as a result of ionic bonding.
Strong electrostatic interactions between the ions with opposing charges hold the lattice together. Ionic chemicals do not exist as isolated molecules since the lattice permeates the entire crystal.
For such more question on molecules:
https://brainly.com/question/475709
#SPJ11
which statement concerning galvanic (voltaic) cells and/or electrolytic cells is correct? electrolytic cells can serve as a source of electrical energy external electric energy must be supplied to a galvanic (voltaic) cell. the cathode is the site of reduction in a galvanic (voltaic) cell but the cathode is the site of oxidation in an electrolytic cell. in a galvanic (voltaic) cell the redox reaction is always spontaneous.
The correct statement concerning galvanic (voltaic) cells and electrolytic cells is that external electric energy must be supplied to an electrolytic cell, while in a galvanic (voltaic) cell, the redox reaction is always spontaneous.
Galvanic cells produce electrical energy from a spontaneous redox reaction, where the anode undergoes oxidation and the cathode undergoes reduction. This flow of electrons generates an electrical current that can be used to power electronic devices. In contrast, electrolytic cells require an external source of electrical energy to drive a non-spontaneous redox reaction. The anode serves as the site of oxidation, and the cathode serves as the site of reduction. By supplying electrical energy, the reaction can proceed in the desired direction, producing a product that would not form spontaneously.
In summary, galvanic cells can serve as a source of electrical energy, while electrolytic cells require external electric energy to drive a non-spontaneous reaction. The cathode is the site of reduction in a galvanic (voltaic) cell, but the cathode is the site of oxidation in an electrolytic cell. Finally, in a galvanic (voltaic) cell, the redox reaction is always spontaneous, while in an electrolytic cell, an external energy source is required to drive the non-spontaneous reaction.
for more such questions on spontaneous.
https://brainly.com/question/29315358
#SPJ11
The highest temperature ever recorded in the United States is 134°F at Greenland Ranch, Death Valley, CA, on July 13, 1913.
What is this temperature on the Celsius scale?
What is this temperature on the Kelvin scale?
The highest temperature ever recorded in the United States, which is 134°F, is equivalent to approximately 56.7°C on the Celsius scale and approximately 329.85 K on the Kelvin scale.
To convert the highest temperature ever recorded in the United States, 134°F at Greenland Ranch, Death Valley, CA, on July 13, 1913, to the Celsius scale, we need to use the formula:
°C = (°F - 32) *\frac{ 5}{9}
Plugging in the values, we get:
°C = (134 - 32) *\frac{ 5}{9} = 56.7°C
To convert this temperature to the Kelvin scale, we need to use the formula:
K = °C + 273.15
Plugging in the value of Celsius we just calculated, we get:
K = 56.7 + 273.15 = 329.85K
Therefore, the highest temperature ever recorded in the United States is equivalent to 56.7°C on the Celsius scale and 329.85K on the Kelvin scale. It is worth noting that the Kelvin scale starts at absolute zero (−273.15°C), making it the preferred temperature scale for scientific calculations.
learn more about Kelvin scale Refer: https://brainly.com/question/28938811
#SPJ11
Calculate the [h ] for a 0. 0473 m solution of barium hydroxide, ba(oh)2 assuming complete dissociation of the compound
The hydrogen ion concentration ([h]) for a 0.0473 m solution of Barium hydroxide, [tex]Ba(OH)2[/tex] assuming complete dissociation of the compound is 0.0946 mol/L.
The symbol [h] typically refers to the hydrogen ion concentration in a solution.
The balanced equation for the solution of barium hydroxide is
[tex]Ba(OH)_{2} (s)[/tex] → [tex]Ba_{2}[/tex](aq) + 2OH-(aq)
Here [tex]Ba(OH)_{2}[/tex] dissolves completely. The concentration of barium hydroxide and OH- will be equal to the concentration [tex]Ba(OH)2[/tex] originally added to the solution
The OH- concentration will be calculated as:
[OH-] = 2 × 0.0473 mol/L
[OH-]= 0.0946 mol/L
[h] = [H+] = [OH-] = 0.0946 mol/L
Therefore, we can conclude that the hydrogen ion concentration ([h]) is 0.0946 mol/L.
To learn more about Barium hydroxide
https://brainly.com/question/31327057
#SPJ4
The diagram below shows the structure of an animal cell.
The image of an animal cell is shown with some organelles labeled numerically from 1 to 6. The outer double layer boundary of the cell is labeled 1. A stacked disc like structure is labeled 2. A broad rod shaped structure with an irregular shape inside it is labeled 3. The entire plain section that forms the background of the cell and is within the outer boundary is labeled 4. A small circular shape within the large circular shape is labeled 5. The large central circular shape is labeled 6.
Which number label represents the mitochondria?
1
2
3
6
Mitochondria is a double membrane bound organelle which is found in most eukaryotic organisms. They are found inside the cytoplasm and essentially function as the cells digestive system. Here number 3 represents the mitochondria. The correct option is C.
Mitochondria popularly known as the power house of the cell play an important role in breaking down the nutrients and produce energy rich molecules for the cell. Its size ranges from 0.5 to 1.0 micrometer in diameter.
The mitochondria is a double membraned rod shaped structure which is found both in plants and animals. It comprises of an outer membrane, inner membrane and a gel material called matrix.
Thus the correct option is C.
To know more about mitochondria, visit;
https://brainly.com/question/29763308
#SPJ1
Metals are found on the ____ side of the periodic table and typically react by _____.
Metals are found on the left side of the periodic table and typically react by losing electrons to form positive ions.
Metals are a class of elements that are characterized by their lustrous appearance, high thermal and electrical conductivity, and malleability. They are generally found in the solid state at room temperature, with the exception of mercury, which is a liquid.
Some common examples of metals include copper, iron, gold, silver, aluminum, and lead. Metals can be found in nature in various forms, such as in ores, minerals, or as free elements. They are also widely used in various applications such as construction, transportation, electronics, and medicine.
Metals are typically classified as either ferrous or non-ferrous. Ferrous metals contain iron, and examples include steel and cast iron. Non-ferrous metals do not contain iron, and examples include aluminum, copper, brass, and bronze.
Visit here to learn more about malleability brainly.com/question/1349130
#SPJ11
classify each solvent correctly. hexane hexane drop zone empty. acetone acetone drop zone empty. ethanol ethanol drop zone empty.
Hexane is a non-polar solvent, acetone is a polar solvent, and ethanol is a polar solvent that can also dissolve non-polar compounds. The properties of each solvent make it suitable for different applications in the laboratory and industry.
The three solvents mentioned are hexane, acetone, and ethanol. These are organic solvents commonly used in various chemical and biological experiments.Hexane is an aliphatic hydrocarbon solvent with six carbon atoms and no double bonds. It is non-polar and has a low boiling point, making it ideal for extraction and purification of non-polar compounds. Hexane is often used in the food industry to extract vegetable oils from seeds and nuts.Acetone is a polar, aprotic solvent with a high vapor pressure and a low boiling point. It is commonly used in the laboratory as a solvent for polar compounds such as sugars, proteins, and nucleic acids. Acetone is also used as a cleaning agent and in the production of various chemicals, including plastics and fibers.Ethanol is a polar solvent that is often used as a solvent for polar and non-polar compounds. It is commonly used as a disinfectant, antiseptic, and solvent in the pharmaceutical and cosmetic industries. Ethanol is also used as a fuel and as a solvent in the production of various chemicals, including perfumes and flavorings.In summary, hexane is a non-polar solvent, acetone is a polar solvent, and ethanol is a polar solvent that can also dissolve non-polar compounds. The properties of each solvent make it suitable for different applications in the laboratory and industry.For more such question on non-polar solvent
https://brainly.com/question/3184550
#SPJ11
which of the following statements correctly describe bonding and antibonding molecular orbitals? select all that apply. multiple select question. a bonding molecular orbital is formed by the addition of the wave functions for two atomic orbitals. a bonding molecular orbital is lower in energy than the original atomic orbitals. an antibonding molecular orbital has a region of zero electron density between the nuclei of the bonding atoms. the node of an orbital is an area of high electron density. a bonding molecular orbital has a region of very low electron density between the nuclei of the bonding atoms.
Two of the statements correctly describe bonding and antibonding molecular orbitals:
a) A bonding molecular orbital is formed by the addition of the wave functions for two atomic orbitals.
b) A bonding molecular orbital is lower in energy than the original atomic orbitals.
Firstly, a bonding molecular orbital is formed by the addition of the wave functions for two atomic orbitals. This results in the two atomic orbitals combining to form a new molecular orbital that is shared by both atoms. The electrons in the bonding molecular orbital are attracted to both nuclei, which stabilizes the molecule.
Secondly, a bonding molecular orbital is lower in energy than the original atomic orbitals. The energy of the bonding molecular orbital is lower than the energy of the atomic orbitals due to the stabilizing effect of the electrons being shared between the two atoms.
An antibonding molecular orbital, on the other hand, has a region of zero electron density between the nuclei of the bonding atoms. The wave functions of the atomic orbitals combine to form an antibonding orbital, which results in destructive interference between the electrons. As a result, the electrons in the antibonding orbital are repelled from both nuclei, which destabilizes the molecule.
The node of an orbital is not an area of high electron density but rather a region of zero electron density. A bonding molecular orbital has a region of very low electron density between the nuclei of the bonding atoms, not zero electron density as in an antibonding orbital.
Therefore, the statements in option (a) and (b) are correct.
for more such question on molecular orbitals
https://brainly.com/question/30512962
#SPJ11
What is the molar mass of H2O? (I.e. what does a mole of water weigh in grams or what is the molecular weight of water?)
The molar mass of H2O is 18 amu, which means that one mole of water weighs 18 grams.
The molar mass of H2O, also known as water.
To determine the molar mass of H2O, we need to consider the molecular weight of its constituent elements, hydrogen (H) and oxygen (O). The molecular weight of an element is the weight of one mole of that element, expressed in atomic mass units (amu). The molecular weight of hydrogen is approximately 1 amu, while the molecular weight of oxygen is approximately 16 amu.
Now, let's calculate the molar mass of H2O. In a water molecule, there are two hydrogen atoms and one oxygen atom, so we'll need to add the molecular weights of these elements together.
Molar mass of H2O = (2 * molecular weight of H) + (1 * molecular weight of O)
Molar mass of H2O = (2 * 1 amu) + (1 * 16 amu)
Molar mass of H2O = 2 amu + 16 amu
Molar mass of H2O = 18 amu
So, the molar mass of H2O is 18 amu, In other words, the molecular weight of water is 18 grams per mole.
learn more about molar mass Refer: https://brainly.com/question/29181740
#SPJ11
100 POINT Chemistry help!!!! Answer all the blank please and thanks! (WIll give brainliest)
Answer:
1. Triprotic
2. H3BO3 --> H+ + H2BO3- --> H+ + HBO3 2- --> H+ + BO3 3-
When a ketone and its enol are in equilibrium, under most conditions, the concentration of the enol is _________ the concentration of the ketone. A. Slightly higher than B. Equal to C. Much higher than D. Much lower than E. Exactly half of primary
When a ketone and its enol are in equilibrium, under most conditions, the concentration of the enol is slightly higher than the concentration of the ketone. Option A is Correct.
This is because the enol is the less stable tautomer and therefore the equilibrium lies slightly towards the enol form.
The keto-enol tautomerism is the name of this chemical equilibrium. The enol tautomer and keto would quickly reach equilibrium. Additionally, because the keto form is more stable in this equilibrium, it predominates in the combination. Therefore, the enol's concentration would be lower than the keto's.
Even though enol suggests the presence of a double bond and a hydroxyl group, they carry a carbonyl bond. The stabilising components of both the keto and enol tautomers are necessary for the equilibrium of keto-enol tautomerization.
The enol that might have produced 2-pentanone was pent-1-en-2-ol. Equilibrium is not a very good depiction because it substantially favours the ketone.
Little reaction might be seen if the ketone was treated with bromine because the enol level might be too low.
Learn more about keto-enol tautomerization here
https://brainly.com/question/27749729
#SPJ11
Read the article and answer the question. Aspirin Which property does aspirin have that salicylic acid does not have? ability to dull pain lower solubility lower acidity
The lower acidity is property aspirin have that salicylic acid does not have. So, option (d) is right one.
Aspirin is insoluble in water, so aspirin precipitates when water is added. Some other compounds, acetic anhydride and acetic acid, are soluble in water, but salicylic acid is sparingly soluble in cold water. For this reason, it is also called 2-hydroxybenzoic acid.
The lower solubility of salicylic acid in water compared to aspirin is due to the intramolecular hydrogen bonding in S.A. molecules around many heavy molecules (water) and dissolve each SA molecule, so that more molecules of solvent (water) is required to surround and solvate each S.A. molecule. Hence, salicylic acid is less acidic than aspirin.
For more information about salicylic acid , visit :
https://brainly.com/question/14711636
#SPJ4
Complete question:
Read the article and answer the question. Aspirin Which property does aspirin have that salicylic acid does not have?
a) ability to dull pain
b) lower solubility
c) lower acidity
Calculate the volume that 4.5 kg of ethylene gas (C₂H₂) will occupy at STP
Answer:
3, 876.9 ~ 3, 877
Explanation:
4.5 kg = 4500 g....... convert to gram
n =m/M , n= no of mol
m= mass of sub.
M= molar mass
so n= 4500g / 26g/mol
n= 173.076 mol
then 1 mol = 22.4 L ............... at STP
at STP 173.076 mol = X
then when u solve X by
X = (173.076 mol × 22.4 L)/ 1 mol
X = 3, 876.9 L at STP which is aproximate to
3, 877L at STP
When is exactly neutralized by , the hydrogen ion concentration in the resulting solution is:
A
always less than the concentration of hydroxide ions
B
always greater than the concentration of hydroxide ions
C
always equal to the concentration of hydroxide ions
D
sometimes greater and sometimes less than the concentration of hydroxide ions.
The hydrogen ions from the acid react with the hydroxide ions from the base to form water. This reaction is also known as an acid-base neutralization reaction. The resulting solution is neutral, meaning that it has a pH of 7. The correct option is C.
When an acid is neutralized by a base, the resulting solution contains water and a salt.
In a neutral solution, the concentration of hydrogen ions (H⁺) is equal to the concentration of hydroxide ions (OH⁻). This means that the answer is C - always equal to the concentration of hydroxide ions. The equation for this reaction is:
HA + BOH → H₂O + BA
In this equation, HA represents an acid, BOH represents a base, H₂O represents water, and BA represents a salt.
The pH of a solution can be determined by calculating the concentration of hydrogen ions. If the concentration of hydrogen ions is greater than the concentration of hydroxide ions, the solution is acidic and has a pH less than 7. If the concentration of hydroxide ions is greater than the concentration of hydrogen ions, the solution is basic and has a pH greater than 7. In a neutral solution, the concentration of hydrogen ions is equal to the concentration of hydroxide ions, resulting in a pH of 7.
To know more about neutralization reaction, refer to the link below:
https://brainly.com/question/28970253#
#SPJ11
A chemical equation is balanced whenA. the total number of molecules is the same in reactants.B. The charge on each atom is the same in reactants and products.C. the total number of ions is the same in reactants and products.D. the sum of the coefficients of the reactants is equal to the sum of the coefficients of the products.E. the number of atoms of each element is the same in reactants and products.
A chemical equation is balanced when E. the number of atoms of each element is the same in reactants and products because in a balanced chemical reaction the amount of reactants is equal to the amount of products.
A balanced chemical equation represents a chemical reaction with the same number of atoms of each element on both sides of the equation. In other words, the total mass and the number of atoms in the reactants are equal to those in the products.
The balance of the equation is achieved by adjusting the coefficients in front of the chemical formulas of the reactants and products to ensure that the same number of atoms of each element is present on both sides of the equation. Hence, option E is correct.
Balancing the chemical equation is important as it helps to predict the amount of reactants and products that will be used and formed, respectively, and it also ensures that the reaction follows the law of conservation of mass.
To learn more about chemical equation, click here:
https://brainly.com/question/30087623
#SPJ11