Cohen's d is 0.44, which suggests a medium effect size
Null hypothesis: H0: µ = 4.5 and Alternative hypothesis: Ha: µ > 4.5 (one-tailed test)
The sample mean is M = 5.2 and the sample size is n = 31. The population standard deviation is unknown, so we use the t-distribution.
The standard error of the mean is:
[tex]SE=\frac{\sqrt{\frac{SS}{n-1} } }{\sqrt{n} } = \frac{\sqrt{\frac{-170}{30} } }{\sqrt{31} } = 0.328[/tex]
The t-statistic is:
[tex]t= (\frac{M-µ}{SE}) = (\frac{5.2-4.5}{0.328}) = 2.13[/tex]
Using a one-tailed t-test with a .01 level of significance and 30 degrees of freedom, the critical value is 2.756. Since the obtained t-value (2.13) is less than the critical t-value (2.756), we fail to reject the null hypothesis.
Since we failed to reject the null hypothesis, we cannot conclude that the medication significantly increased flexibility.
Cohen's d can be calculated as:
[tex]d= \frac{(M-µ}{SD} = \frac{5.2-4.5}{\sqrt{\frac{SS}{n-1} } } = \frac{0.84}{1.9} = 0.44[/tex]
Therefore, Cohen's d is 0.44, which suggests a medium effect size.
To know more about "null and alternative hypothesis" refer here:
https://brainly.com/question/30535681#
#SPJ11
Slope Determine the slope of the line above.
The slope of the line given above which passes through points (-2, -1) and (0, -2) is calculated as: m = -1/2.
How to Find the Slope of a Line?To find the slope of the line given above, apply the slope formula, then use the coordinates of any two points on the line to calculate the slope.
Slope of a line (m) = change in y / change in x = y2 - y1 / x2 - x1
We have:
(-2, -1) = (x1, y1)
(0, -2) = (x2, y2)
Plug in the values:
Slope (m) = (-2 -(-1)) / (0 - (-2))
m = -1 / 2
Slope of the line (m) = -1/2
Learn more about the slope of a line on:
https://brainly.com/question/29044610
#SPJ1
The roots of the auxiliary equation m^2 + 9 = 0 is m = ±3 m = ± 3i None of these m = i + ± 3. The order of the differential equation x^2y" + xy' + (x2 – 16)y = 0 is 1, 2, 3, 4
We can proceed with finding the specific solution using either method mentioned above.
The order of the differential equation is 2.
Since the auxiliary equation has complex roots (±3i), we know that the general solution to the differential equation will involve sine and cosine functions.
To find the specific solution, we can use the method of undetermined coefficients or variation of parameters. However, we first need to check for any singular points or irregular singular points in the equation.
Since the coefficient of y is a polynomial in x and the coefficient of y" is also a polynomial in x, there are no singular points or irregular singular points in the equation.
Therefore, we can proceed with finding the specific solution using either method mentioned above.
To learn more about undetermined visit:
https://brainly.com/question/13202932
#SPJ11
What is the distance of a circular path calculated from
The distance of a circular path can be found using the formula for the circumference of a circle, which is C = πd.
The distance of a circular path can be calculated using the formula for the circumference of a circle. The circumference of a circle is the distance around the circle and can be found by multiplying the diameter of the circle by pi (π), which is a mathematical constant equal to approximately 3.14159.
The formula for the circumference of a circle is:
C = πd
where C represents the circumference of the circle, and d represents the diameter of the circle.
To calculate the distance of a circular path, we first need to know the circumference of the circle. If we know the radius of the circle, we can find the diameter by multiplying the radius by 2. Once we have the diameter, we can use the formula above to find the circumference.
Alternatively, if we know the length of the circular path or the angle through which we have traversed, we can use trigonometric functions to calculate the radius and then use the formula above to find the circumference.
To learn more about circular paths
https://brainly.com/question/28832526
#SPJ4
Complete question:
"What formula or equation can be used to calculate the distance of a circular path?"
1. A train 600 m long is running at the speed of 40 km/hr. Find the time taken by it to pass a man standing near the railway line. Not yet answered A 54 B. 10 sec C. 15 sec D. 10.5
The time taken by the train to pass the man is 54 seconds
To find the time taken by the train to pass a man standing near the railway line, we need to convert the train's speed to meters per second and then use the formula time = distance/speed.
1. Convert the speed of the train from km/hr to m/s: 40 km/hr * (1000 m/km) / (3600 s/hr) = 40000/3600 = 40/3.6 = 10/0.9 = 100/9 m/s.
2. Now, use the formula: time = distance/speed. The distance is the length of the train (600 m) and the speed is 100/9 m/s.
time = 600 m / (100/9 m/s) = 600 * 9 / 100 = 54 seconds.
Therefore, the time taken by the train to pass the man is 54 seconds (Option A).
To learn more about Time and speed visit
https://brainly.com/question/13388824
#SPJ11
Solve each system by using elementary row operations on the equations or on the augmented matrix. Follow the systematic elimination procedure described in this section.
2x 1+4x 2=−4 5x1+7x 2=11
The solution to the system is [tex]$\$\left(x_{-} 1, x_{-} 2\right)=(4,-3) \$$[/tex].
To solve the system, we can use the method of elimination or Gaussian elimination.
We start by writing the system in augmented matrix form:
[tex]$$\left[\begin{array}{cc|c}2 & 4 & -4 \\5 & 7 & 11\end{array}\right]$$[/tex]
We can eliminate the [tex]$\$ x_{-} 1 \$$[/tex] variable from the second equation by subtracting 5 times the first equation from the second:
[tex]$$\left[\begin{array}{cc|c}2 & 4 & -4 \\5-5(2) & 7-5(4) & 11-5(-4)\end{array}\right] \Rightarrow\left[\begin{array}{cc|c}2 & 4 & -4 \\-3 & -13 & 31\end{array}\right]$$[/tex]
Next, we can eliminate the [tex]$\$ x_{-} 2 \$[/tex]$ variable from the first equation by subtracting twice the second equation from the first:
[tex]$$\left[\begin{array}{cc|c}2-2(-13) & 4-2(7) & -4-2(31) \\-3 & -13 & 31\end{array}\right] \Rightarrow\left[\begin{array}{cc|c}28 & -10 & -66 \\-3 & -13 & 31\end{array}\right]$$[/tex]
We can simplify this further by dividing the first row by 2 :
[tex]$$\left[\begin{array}{cc|c}14 & -5 & -33 \\-3 & -13 & 31\end{array}\right]$$[/tex]
Now we can solve for [tex]$\$ x_{-} 2 \$$[/tex] in terms of [tex]$\$ x_{-} 1 \$$[/tex] by multiplying the first equation by 13 and adding it to the second equation:
[tex]$$13(14) x_1-13(5) x_2-13(33)-3(-13) x_1-3(-13) x_2=13(31)-3(14) x_1$$[/tex]
Simplifying:
[tex]$$\begin{aligned}& 169 x_1-91 x_2-429+39 x_1+39 x_2=403 \\& 208 x_1=832 \\& x_1=4\end{aligned}$$[/tex]
Substituting back into the first equation, we get:
[tex]$$2(4)+4 x_2=-4 \Rightarrow x_2=-3$$[/tex]
Therefore, the solution to the system is [tex]$\$\left(x_{-} 1, x_{-} 2\right)=(4,-3) \$$[/tex].
To learn more about elimination visit:
https://brainly.com/question/29625952
#SPJ11
You started your day out with $120 in your bank account. You paid your electricity bill that was $67. Then, you went out with friends and spent $44 on your night out. On your way home, you stopped and purchased gas for $35. How much do you have to deposit into your bank account to not receive an overdraft fee?
You need to deposit at least $74 into your bank account to avoid an overdraft fee.
We have,
Start with the initial balance = $120
Subtract the first expense, the electricity bill = $120 - $67 = $53
Subtract the second expense, the night out with friends = $53 - $44 = $9
Subtract the third expense, the gas purchase = $9 - $35 = -$26
Now,
Since the remaining balance is negative, you would receive an overdraft fee if you left it at this amount.
To avoid the overdraft fee, you need to deposit enough money to bring your account balance back to $0 or higher.
To do this, you need to add the absolute value of the negative balance to your desired minimum balance, which in this case is:
$0 = |-26| + $0 = $26
Therefore,
You need to deposit at least $74 into your bank account to avoid an overdraft fee.
Learn more about expressions here:
https://brainly.com/question/3118662
#SPJ1
Quiz 11-1: Area of plane figures, sectors, and composite figures Unit 11 Volume and surface area
Area measures the size of a closed curve in square units. It is the degree of the measure of a two-dimensional region enclosed \by a closed bend. It is solved in square units.
What is the Area of plane figures?The equation for the areas of diverse plane figures are:
Square: Zone = side × side or A = s², where s is the length of one side.Rectangle: Region = length × width or A = lw, where l is the length and w is the width.Triangle: Zone = 1/2 × base × stature or A = 1/2bh, where b is the base and h is the tallness.Therefore, for composite figures, which are made up of two or more basic figures, the zone can be found by including the ranges of the person figures. Some of the time, it may be essential to subtract ranges that are numbered twice.
Learn more about Area of plane figures from
https://brainly.com/question/4895332
#SPJ1
2. If one angle of a parallelogram is 60 degrees, find the number of degrees in the remaining three angles.
3.
Are the diagonals of a parallelogram perpendicular? Why orwhy not? Explain.
4. Does an isosceles trapezoid have two sets of parallel sides? Why or why not? Explain.
The total area is given as 1600 sq. ft
What is the area of a square?The formula used to calculate the area of a square is A = s^2, where "A" depicts the area and "s" represents the length of one side of the square.
This essentially means that the area obtained through this formula is equivalent to the outcome produced by squaring the measure for one of its sides.
To clarify, if an object in the shape of a square has a sidereal extension of 5 spatial units, then it's overall measurement will equal 25 quadrangular units (5 x 5 = 25).
It is particularly pertinent to note that expressions for physical space, such as those associated with centimeters, meters or even feet are invariably employed when referring to areas corresponding to squares.
Read more about area here:
https://brainly.com/question/25292087
#SPJ1
A particular fruit's weights are normally distributed, with a mean of 753 grams and a standard deviation of 9 prams if you pick 3 fruits at random, then of the time, their mean weight will be greater than how many grams? Give your answer to the nearest grami.
If you pick 3 fruits at random, the mean weight will be greater than 757 grams approximately 1.26% of the time.
To solve this problem, we need to use the properties of the normal distribution. We know that the weights of the fruit are normally distributed with a mean of 753 grams and a standard deviation of 9 grams.
The mean of the sample of 3 fruits will also be normally distributed with a mean of 753 grams and a standard deviation of 3 grams (since we are dividing by the square root of the sample size).
To find the probability that the mean weight of the sample of 3 fruits will be greater than a certain amount, we need to convert this amount to a z-score using the formula:
z = (x - μ) / (σ / √n)
where x is the amount we are interested in, μ is the mean, σ is the standard deviation, and n is the sample size (in this case, 3).
In this case, we want to find the z-score for a mean weight of 757 grams:
[tex]z = \frac{(757 - 753)}{\frac{9}{\sqrt{3}} }} =1.26[/tex]
We can use a standard normal distribution table or calculator to find that the probability of getting a z-score greater than 1.26 is approximately 0.0985, or 9.85%. However, since we are interested in the probability that the mean weight will be greater than 757 grams (not just greater than the mean), we need to add half of the probability of getting exactly 757 grams (which is the mode of the distribution) to this value.
Since the normal distribution is symmetrical, the probability of getting exactly 757 grams is the same as the probability of getting exactly 749 grams (which is the mean minus one standard deviation). Using the same formula as before, we can find the z-score for a weight of 749 grams:
z = \frac{(749 - 753)}{\frac{9}{\sqrt{3}} }} =-1.26[/tex]
The probability of getting a z-score less than -1.26 is also approximately 0.0985, so the probability of getting exactly 757 grams is approximately 0.197. Half of this value is 0.0985, which we add to the probability of getting a z-score greater than 1.26 to get the final answer:
0.0985 + 0.0985 = 0.197
So the probability of getting a mean weight greater than 757 grams is approximately 0.0985 + 0.197 = 0.2965, or 29.65%.
To convert this probability to weight, we can use a standard normal distribution table or calculator to find the z-score corresponding to a probability of 29.65%. This is approximately 0.56. Using the same formula as before, we can solve for x:
\frac{(x - 753)}{\frac{9}{\sqrt{3}} }} =0.56[/tex]
x ≈ 757.23
So if you pick 3 fruits at random, their mean weight will be greater than 757 grams approximately 1.26% of the time.
To know more about the calculation of z-score visit:
https://brainly.com/question/31613365
#SPJ11
Plane A has just 1 ton of fuel left and has requested plane B to refuel it. Plane B has 21 tons of fuel. Fuel transfer happens at the rate of 1 ton per minute. Use this information as you work through the activity and find how long it will take to refuel plane A until both planes have the same amount of fuel. Let x be the time in minutes and y be the amount of fuel in tons. The equation y = x + 1 represents the quantity of fuel with respect to time in plane A, and y = -x + 21 represents the quantity of fuel with respect to time in plane B. For each equation, find two points that satisfy the equation
The time for which plane B will take to refuel plane A is equals to 10 minutes. The two points who satisfy the equation, y = x + 1, are (0, 1), (-1,0). The two points who satisfy the equation, y = -x + 21, are (0,21), (21,0).
We have a fuel left in Plane A = 1 ton
fuel left in Plane B = 21 tons
Fuel transfer rate = 1 ton per minute
In order that for them to have the same amount of fuel, We add up the fuel left in Plane A and Plane B = 21 + 1 = 22 tons. This implies each plane will have fuel of 11 tons. Time that plane B will take to refuel plane A until both planes have the same amount of fuel is calculated by : Plane B will transfer 10 tons of fuel to A.
Plan A has a total of 11 tons. Since, the transfer rate = 1 ton per minute
=> 1 ton will transfer in 1 minute
So, 10 tons fuel will need 10 minutes. Hence, required time value is 10 minutes. Now, The equation for quantity of fuel with respect to time in plane A is, y = x + 1 --(1). If x = 0 => y = 1
and y = 0 => x = -1. So, (0, 1) and (-1,0).
The equation for quantity of fuel with respect to time in plane B is, y = -x + 21 --(2). For it, x = 0 => y = 21 and y= 0 => x = 21. Hence, two points that satisfy the equation(1) and equation(2) are (0, 1), (-1,0) and (0,21), (21,0) respectively.
For more information about time, visit:
https://brainly.com/question/31020192
#SPJ4
(5) (20 pts) Is it possible for a binary relation to be both symmetric and antisymmetrics If the answer is no, why not? If it is yes, find all such binary relations.
No, it is not possible for a binary relation to be both symmetric and antisymmetric because a relation cannot be both symmetric and antisymmetric unless it is the empty relation, as the properties of symmetry and antisymmetry contradict each other for non-empty sets.
A relation is symmetric if for any elements x and y in the set, if (x,y) is in the relation, then (y,x) is also in the relation. This means that the relation is symmetric around the diagonal.
On the other hand, a relation is antisymmetric if for any elements x and y in the set, if (x,y) is in the relation and (y,x) is in the relation, then x=y. This means that the relation is asymmetric around the diagonal.
If a relation is both symmetric and antisymmetric, then it means that for any elements x and y in the set, if (x,y) is in the relation, then (y,x) is also in the relation, and x=y. This implies that the relation is only defined on pairs of identical elements, and therefore it is the diagonal relation, which is reflexive, symmetric, and antisymmetric.
In summary, the only binary relation that is both symmetric and antisymmetric is the diagonal relation, which is defined as {(x,x) : x is an element of the set}.
To learn more about binary relation visit : https://brainly.com/question/13915405
#SPJ11
Based on the information from the table, how much more will a pharmacist make than a police officer over 15 years?
Answer:
I think its 42
Step-by-step explanation:
Hope u get the right answer!
what is the appropriate area of the composite figure shown below to the nearest hundredth ?
The appropriate area of the composite figure with given dimensions is given by option b. 71.77cm² (nearest hundredth).
Composite figure consist of a triangle and rectangle from which semicircle is cut.
Diameter of the semicircle = 7cm
Radius of the semicircle 'r' = 3.5 cm
Area of the semicircle = ( 1/2) πr²
= ( 1/2) × 3.14 × (3.5)²
= 19.2325cm²
length of the rectangle = 10cm
Width of the rectangle = 7cm
Area of the rectangle = length × width
= 10 × 7
= 70cm²
base of the triangle = 7cm
height of the triangle = 6cm
Area of the triangle = ( 1/2) × base × height
= ( 1/2) × 7 × 6
= 21 cm²
Appropriate area of the composite figure
= Area of the triangle + area of the rectangle - area of semicircle
= 21 + 70 - 19.2325cm²
= 71.7675cm²
= 71.77cm² ( nearest hundredth )
Therefore, the area of the composite figure is equal to option b. 71.77cm².
learn more about area here
brainly.com/question/30966932
#SPJ1
From the attachment, what is the measure of the indicated angle to the nearest degree?
Answer:
69
Step-by-step explanation:
180-45=135
69 is the nearest angle degree.
789,506 round to ten thousand
A rectangle has a length of 9.6 cm and a width of 6.5 cm. What is the area, in square centimeters, of the rectangle?
The area of the rectangle is 62.4 square centimeters.
The area of a rectangle is a measure of the amount of space enclosed by the rectangle in two-dimensional (2D) space. It is the product of the length and width of the rectangle, and is usually expressed in square units.
The area of a rectangle will be given by the formula;
Area = Length × Width
where "Length" represents the length of one side of the rectangle, and "Width" represents the length of the other side of the rectangle.
Given that the length of the rectangle is 9.6 cm and the width is 6.5 cm, we can substitute these values into the formula;
Area = 9.6 cm × 6.5 cm
Calculating the area using these values;
Area = 62.4 cm²
To know more about area of the rectangle here
https://brainly.com/question/8663941
#SPJ1
Two ships leave a port at 9 a.m. One travels at a bearing of N 53° W at 12 miles per hour, and the other travels at a bearing of S 67° W at s miles per hour. (a) Use the Law of Cosines to write an equation that relates s and the distance d between the two ships at noon. (b) Find the speed s that the second ship must travel so that the ships are 42 miles apart at noon. (Round your answer to two decimal places.) mi/h
a) Using the Law of Cosines for this triangle, we can write the equation:
d² = (36)² + (3s)² - 2(36)(3s)cos(60°)
b) The second ship must travel at approximately 4.24 miles per hour to be 42 miles apart from the first ship at noon.
(a) To write an equation that relates the speed s and the distance d between the two ships at noon using the Law of Cosines, we first need to determine the distance each ship has traveled by noon. Since they leave at 9 a.m. and we're interested in the distance at noon, they travel for 3 hours.
Ship 1:
Speed: 12 miles per hour
Distance traveled: 12 miles/hour * 3 hours = 36 miles
Ship 2:
Speed: s miles per hour
Distance traveled: s miles/hour * 3 hours = 3s miles
Now, we can form a triangle where Ship 1 travels 36 miles, Ship 2 travels 3s miles, and the distance between them (d) is the third side. The angle between Ship 1 and Ship 2 is 180° - (53° + 67°) = 60°.
Using the Law of Cosines for this triangle, we can write the equation:
d² = (36)² + (3s)² - 2(36)(3s)cos(60°)
(b) To find the speed s that the second ship must travel so that the ships are 42 miles apart at noon, we can plug d = 42 into our equation from part (a) and solve for s.
42² = (36)² + (3s)² - 2(36)(3s)cos(60°)
Solving for s, we get:
s ≈ 4.24 miles per hour (rounded to two decimal places)
So, the second ship must travel at approximately 4.24 miles per hour to be 42 miles apart from the first ship at noon.
Learn more about "speed": https://brainly.com/question/13943409
#SPJ11
HELP QUICKLY PLEASE.
The Freshmen class conducted a survey of the 9th grade students to figure out what type of items they should sell to raise money. The choices were wrapping paper, cookies, fidget spinners or school supplies. The teacher told them to select the appropriate measure of central tendency for the data they collected.
which of the followed statements would help them decide which measure of central tendency to use for their answer?
A) The MODE is the most appropriate when the data is not numerical
B) The RANGE of data will vary depending on how many students they survey
C) The MEDIAN is a better measure to use when the data set has an extreme high or low value
D) The MEAN is the average of the numbers in the data set
Answer:
D) The MEAN is the average of the numbers in the data set.
The correct statement is:
D) The MEAN is the average of the numbers in the data set.
What is the mean?In mathematics and statistics, the term "mean" refers to the average of a set of variables. There are various ways to determine the mean, including geometric means, harmonic means, and simple arithmetic means (putting the numbers together and dividing the result by the quantity of observations).
The statement about the mean provides a definition of a measure of central tendency and is a useful starting point in deciding which measure to use.
The other statements are not relevant to deciding which measure of central tendency to use.
A) The mode can be used for numerical data as well as non-numerical data.
B) The range is not a measure of central tendency, it is a measure of dispersion or variability.
C) The median is often used to avoid the effect of extreme values, but it is not specific to data sets with extreme values.
D) The Mean is the average of the numbers in the data set.
To learn more about the mean;
brainly.com/question/13451489
#SPJ2
Retail stores overflowing with merchandise can make consumers anxious, and minimally stocked spaces can have the same effect. Researchers investigated whether the use of ambient scents can reduce anxiety by creating feelings of openness in a crowded environment or coziness in a minimally stocked environment. Participants were invited to a lab that simulated a retail environment that was either jam-packed or nearly empty. For each of these two product densities, the lab was infused with one of three scents: (1) a scent associated with spaciousness, such as the seashore, (2) a scent associated with an enclosed space, like the smell of firewood, and (3) no scent at all. Consumers evaluated several products, and their level of anxiety was measured Tina Poon and Bianca Grohmann, "Spatiul density and ambient scent Effects on consumer anxiety," American Journal of Business, 29 (2014), pp 76-94 Complete the table to display the treatments in a design with two factors: "product density" and "ambient scent". Select the appropriate labels that should be in place of "A" and "B" in the table: Ambient scent Seashore A Product density Jam-packed 2 No scent 3 6 Complete the table to display the treatments in a design with two factors: "product density" and "ambient scent". Select the appropriate labels that should be in place of "A" and "B" in the table: Ambient scent Seashore Jam-packed Product density No scent A 2 1 3 B 4 $ 6 The remaining choice for ambient scent, labeled A, should be and the remaining choice for product density, labeled B, should be Outline the design of a completely randomized experiment to compare these treatments. The outline places participants in groups based on age and compares the anxiety level of each consumer after having them evaluate several products. The outline randomly assigns participants to a different retail store and then compares the anxiety level of each consumer after having made a purchase. The outline randomly assigns participants to each treatment and compares the anxiety level of each consumer after having them evaluate several products. The outline randomly assigns participants to one of the product density groups, but then participants are further split by scent based on personal preference. After several products have been evaluated anxiety levels of each consumer are compared There are 30 subjects available for the experiment, and they are to be randomly assigned to the treatments, an equal number of subjects in each treatment. Explain how you would number subjects and then randomly assign the subjects to the treatments. Use Table B starting at line 133 and assign subjects to only the first treatment group. Assign n = 15 consumers to each of the two factors. Label the subjects from 01 through 30. Randomly select 15 numbers for factor 1, then the remaining 15 are placed for factor 2. Using Table B at line 133, the consumers assigned to factor 1 are those numbered 04, 18, 07, 13, 02, 05, 19, 23, 20, 27, 16, 21, 26, 08, and 10. Assign = 5 consumers to each of the six treatments. Label the subjects from 01 through 30. Randomly select 5 numbers for treatment 1, then 5 of the remaining consumers for treatment 2, and so on. Using Table B at line 133, the consumers assigned to treatment 1 are those numbered 04, 18, 07, 13, and 02. Assign = 5 consumers to each of the six treatments. Label the subjects from 1 through 30. Randomly select 5 numbers for treatment 1. then 5 of the remaining consumers for treatment 2, and so on. Using Table B at line 133, the consumers assigned to treatment 1 are those numbered 4. 5, 7, 1, and 8. Assign = 5 consumers to each of the six treatments. Have participants choose their favorite number from 1 to 30 and label them as such. Using Table B at line 133, the consumers assigned to treatment I are those numbered 04. 18. 07. 13, and 02. Assign = 6 consumers for each of the six treatments. Label the subjects from through 30. Randomly select 6 numbers for treatment 1, then 6 of the remaining consumers for treatment 2, and so on. Using Table B at line 133, the consumers assigned to treatment are those numbered 4, 5, 7, 1.8, and 6.
Using Table B at line 133, the consumers assigned to treatment 1 are those numbered 4, 5, 7, 1, and 8.
The table displaying the treatments in a design with two factors would be: | | Ambient scent | |----------|--------------| | Product density | Seashore (A) | Enclosed space (B) | No scent | | Jam-packed | 2 | 1 | 3 | | Minimally stocked | 4 | $ | 6 |
To randomly assign the 30 subjects to the six treatments, we would first label the subjects from 01 through 30. Then, we would use Table B starting at line 133 to randomly select the appropriate number of subjects for each treatment. For example, to randomly assign 5 consumers to treatment 1, we would use Table B to select 5 numbers from 01 through 30, and label those subjects as treatment 1. We would then repeat this process for each of the six treatments. An example of this would be: Assign = 5 consumers to each of the six treatments. Label the subjects from 01 through 30. Randomly select 5 numbers for treatment 1, then 5 of the remaining consumers for treatment 2, and so on. Using Table B at line 133, the consumers assigned to treatment 1 are those numbered 4, 5, 7, 1, and 8.
Learn more about Product density,
https://brainly.com/question/1354972
#SPJ11
The position of a particle moving in the xy-plane is given by the parametric functions x(t) and y(t) for which x′(t)=t sin t and y′(t)=5e−3t+2 What is the slope of the tangent line to the path of the particle at the point at which t=2?
Answer:
To find the slope of the tangent line to the path of the particle at the point where t = 2, we first need to find the values of x(2) and y(2), as well as their derivatives x'(2) and y'(2).
Using the given parametric functions, we can find:
x(2) = ∫ x'(t) dt = ∫ t sin(t) dt = -t cos(t) + sin(t) + C
where C is the constant of integration.
Since we want x(2), we can evaluate the above expression at t = 2:
x(2) = -2 cos(2) + sin(2) + C
Similarly, we can find:
y(2) = ∫ y'(t) dt = ∫ (5e^(-3t) + 2) dt = (-5/3)e^(-3t) + 2t + C'
where C' is the constant of integration.
Again, since we want y(2), we can evaluate the above expression at t = 2:
y(2) = (-5/3)e^(-6) + 4 + C'
Now we can find the derivatives x'(2) and y'(2) by taking the derivative of x(t) and y(t), respectively, and evaluating them at t = 2:
x'(2) = 2 sin(2) - cos(2)
y'(2) = (5/3)e^(-6)
Therefore, at t = 2, the particle is at the point (x(2), y(2)) = (-2 cos(2) + sin(2) + C, (-5/3)e^(-6) + 4 + C'), and the slope of the tangent line to the path of the particle at this point is given by:
dy/dx = (dy/dt)/(dx/dt) = y'(2)/x'(2)
Substituting the values we found:
dy/dx = [(5/3)e^(-6) + 4 + C']/(2 sin(2) - cos(2))
Since we don't have enough information to find the value of C', we cannot find an exact value for the slope. However, we can simplify the expression by using the trigonometric identities:
sin(2) = 2 sin(1) cos(1)
cos(2) = cos^2(1) - sin^2(1)
where we let t = 1 for simplicity. Then, we can substitute these expressions and simplify:
dy/dx = [(5/3)e^(-6) + 4 + C']/(4 sin(1) cos(1) - cos^2(1) + sin^2(1))
dy/dx = [(5/3)e^(-6) + 4 + C')/(4 sin(1) cos(1) - 1)
Therefore, the slope of the tangent line to the path of the particle at the point where t = 2 is given by the above expression.
Step-by-step explanation:
The slope of the tangent line to the path of the particle at the point where t=2 is approximately 1.55. To find the slope of the tangent line to the path of the particle at the point where t=2,
we need to use the derivatives of x(t) and y(t).
First, we can find the slope of the tangent line by using the formula:
slope = dy/dx = (dy/dt)/(dx/dt)
So, we need to find both dy/dt and dx/dt.
Given that x′(t)=t sin t, we can find dx/dt by taking the derivative of x(t):
dx/dt = x′(t) = t sin t
Given that y′(t)=5e−3t+2, we can find dy/dt by taking the derivative of y(t):
dy/dt = y′(t) = 5e−3t+2
Now, we can find the slope of the tangent line at t=2 by plugging in these values:
slope = (dy/dt)/(dx/dt) = (5e−3t+2)/(t sin t) = (5e−6+2)/(2 sin 2)
Therefore, the slope of the tangent line to the path of the particle at the point where t=2 is approximately 1.55.
Learn more about tangent line here:
brainly.com/question/31244717
#SPJ11
a local diner must build a wheelchair ramp to provide handicap access to the restaurant. federal building codes require that a wheelchair ramp must have a maximum rise of 1 in. for every horizontal distance of 12 in. a. what is the maximum allowable slope for a wheelchair ramp? assuming that the ramp has a maximum rise, find a linear function h(x) that models the height of the ramp above the ground as a function of the horizontal distance x.
The maximum allowable slope for a wheelchair ramp is 1/12 or approximately 0.0833.
a) The maximum allowable slope for a wheelchair ramp can be calculated using the ratio of the rise to the horizontal distance. According to federal building codes, the maximum rise is 1 inch for every 12 inches of horizontal distance. Therefore, the maximum allowable slope is:
Maximum allowable slope = Rise / Horizontal distance
= 1 inch / 12 inches
= 1/12
So, the maximum allowable slope for a wheelchair ramp is 1/12 or approximately 0.0833.
b) Let's assume that the maximum rise of the ramp is h and the corresponding horizontal distance is x. We can use the slope formula to find the slope of the ramp:
Slope = rise / run
= h / x
According to federal building codes, the maximum allowable slope is 1/12. Therefore, we can set up an equation to represent this:
h / x <= 1/12
Multiplying both sides by x, we get:
h <= x/12
So, the height of the ramp above the ground cannot exceed x/12. Therefore, the linear function that models the height of the ramp above the ground as a function of the horizontal distance x is:
h(x) = kx, where k is a constant that represents the slope of the ramp.
However, we know that the maximum allowable slope is 1/12. So, k must be less than or equal to 1/12. Therefore, the linear function that models the height of the ramp above the ground as a function of the horizontal distance x is:
h(x) = (1/12)x.
Visit to know more about Slope:-
brainly.com/question/16949303
#SPJ11
Find the total radius of a cone with a radius of 4in and a height of 12in
The total radius of a cone with a radius of 4in and a height of 12in is 8in.
The total radius of a cone is the sum of the radius of the base and the slant height of the cone. The slant height of a cone can be found using the Pythagorean theorem, which states that the square of the slant height is equal to the sum of the square of the height and the square of the radius of the base.
So, to find the total radius of the cone, we need to calculate the slant height and add it to the radius of the base.
Slant height = sqrt(radius² + height²)
= √(4² + 12²)
= √(160)
= 12.65in (rounded to two decimal places)
Total radius = radius + slant height
= 4in + 12.65in
= 16.65in
≈ 8in (rounded to two decimal places)
Therefore, the total radius of the cone is approximately 8 inches.
Learn more about cone
https://brainly.com/question/30253224
#SPJ4
Look at the transformation from the green triangle to the blue triangle
Draw and label the "Line of Reflection."
Describe the transformation from green triangle to blue triangle in words
The reflection from green triangle to blue triangle is a reflection over the x-axis
What is reflection over x-axis?Reflecting a two-dimensional shape over the x-axis is a geometric transformation that represents an image flipping or mirroring itself across the fixed x-axis.
This axis appears as the horizontal marker in a Cartesian coordinate system, providing the reference line to then split the plane into its top and bottom elements.
When which this action is fullfilled, all the y-coordinates of each point within the figure will be reversed while the x-coordinate remains unchanged;
The image of the reflection is attached and the reflection line labeled
Learn more about reflection over x-axis at
https://brainly.com/question/28655129
#SPJ1
A rectangle with a move from a right triangle to create the shaded region show but showing
below find the area of the shaded region we should include the correct unit for your answer
The area of the shaded region will be 8 square unit as per the given figure.
The rectangle has dimensions 2 x 4, so its area is:
Area of rectangle = length x width = 2 x 4 = 8 square units
The triangle has dimensions 4 x 8, so its area is:
Area of triangle = (1/2) x base x height = (1/2) x 4 x 8 = 16 square units
To find the area of the shaded region, we need to subtract the area of the triangle from the area of the rectangle.
Area of shaded region = Area of the triangle - Area of rectangle
Area of shaded region = 16-8
Area of shaded region = 8
The area of the shaded region will be 8 square units.
Learn more about Area here:
https://brainly.com/question/27683633
#SPJ1
Complete question:
A pool measuring 10 meters by 20 meters is surrounded by a path of uniform width, as shown in the figure. If the area of the pool and the path combined is 1200 square meters, what is the width of the path?
Answer:
The area of the pool is 10*20 = 200 square meters. Let's assume the width of the path is x. Then the dimensions of the entire region would be (10+2x) by (20+2x). The area of the entire region would be (10+2x)*(20+2x) = 400 + 60x + 4x^2. We know that the area of the pool and the path combined is 1200 square meters. So we can set up the equation as follows:
200 + 1200 = 400 + 60x + 4x^2
Simplifying the equation, we get:
4x^2 + 60x - 1000 = 0
Dividing both sides by 4, we get:
x^2 + 15x - 250 = 0
Factoring the equation, we get:
(x + 25)(x - 10) = 0
x = 10 or x = -25
Since the width of the path can't be negative, the width of the path is 10 meters.
Step-by-step explanation:
Mark Brainliest!!
Question 1:1 11 marks] It has been claimed that more than 40% of all shoppers can identify a highly advertised trademark. 16. in a random sample, 13 of 18 shoppers were able to identify the trademark. At the a = 0.01 level of significance that is there enough evidence to reject the claim?
The proportion of shoppers who can identify the highly advertised trademark is significantly higher than 40% at the 0.01 level of significance.
Let's break it down step-by-step using the provided information:
1. Hypotheses: - Null hypothesis (H0): p = 0.40 (40% of all shoppers can identify the trademark) - Alternative hypothesis (Ha): p > 0.40 (more than 40% of all shoppers can identify the trademark)
2. Level of significance: - α = 0.01
3. Sample information: - n (sample size) = 18 - x (number of successful identifications) = 13 - p-hat (sample proportion) = x / n = 13 / 18 = 0.7222 4. Test statistic
calculation: - We'll use a one-sample z-test for proportions. - z = (p-hat - p) / sqrt((p * (1 - p)) / n) - z = (0.7222 - 0.40) / sqrt((0.40 * (1 - 0.40)) / 18) - z ≈ 2.88 5. Decision: - Since α = 0.01, we'll compare our test statistic to the critical value from the z-table, which is 2.33 for a one-tailed test. - Our test statistic, z ≈ 2.88, is greater than the critical value of 2.33.
Conclusion: Since our test statistic is greater than the critical value at the 0.01 level of significance, we have enough evidence to reject the null hypothesis (H0). This means that there is sufficient evidence to support the claim that more than 40% of all shoppers can identify a highly advertised trademark.
Learn more about critical value,
https://brainly.com/question/28159026
#SPJ11
Henry predicted whether he got answers right or wrong in his 50 question exam.
He identified the 31 questions he thought he got right.
It turns out that Henry got 6 questions wrong that he thought he got correct and he only got 12 of the questions wrong he had predicted.
What is the percentage accuracy he had with predicting his scores?
Which of the following is true regarding a regression model with multicollinearity, a high r2 value, and a low F-test significance level? a.The model is not a good prediction model. b.The high value of 2 is due to the multicollinearity. c.The interpretation of the coefficients is valuable. d.The significance level tests for the coefficients are not valid. e.The significance level for the F-test is not valid.
The correct answer is d. The significance level tests for the coefficients are not valid.
Multicollinearity is a statistical term that refers to the presence of high correlation among predictor variables in a regression model. This can cause issues in the model, such as unstable or unreliable coefficients, and can lead to incorrect conclusions about the relationships between the predictors and the response variable.
When multicollinearity is present, the R-squared value of the model can become inflated because the model is able to explain more of the variation in the response variable due to the high correlation among the predictor variables. This can give the impression that the model is a good predictor when in fact it may not be. Additionally, multicollinearity can cause the F-test significance level to be low, indicating that the model is a good fit, even though the individual coefficients may not be statistically significant.
Multicollinearity can cause inflated R-squared values and low F-test significance levels. However, it does not necessarily mean that the model is a poor predictor. The interpretation of coefficients may also be affected by multicollinearity.
However, the most significant issue with multicollinearity is that it can lead to unreliable significance tests for individual coefficients, making it difficult to determine which predictors are contributing significantly to the model.
To learn more about significance level visit: https://brainly.com/question/13947717
#SPJ11
the figure below is reflected over x axis. what are the coordinates of the image of point v after this transformation
The point V(3, 5) is reflected over the x axis, the new point is V'(3, -5)
What is reflection?Reflection is a type of transformation. Transformation is the movement of a point either up, left, right or down in the coordinate plane.
Reflection is a rigid transformation because it conserves the size and shape of the figure.
If a point A(x, y) is reflected over the x axis, the new point is A'(x, -y)
The coordinate of point V is (3, 5). If the point is reflected over the x axis, the new point is V'(3, -5)
Find out more on reflection at: https://brainly.com/question/26494295
#SPJ1
Which of the following is NOT a factor of 4 x³ − 7x²+x+6?
-
Ox-1
OX-2
Ox+1
Ox+2
All of the expressions are not a factor of the polynomial function 4x³ − 7x²+x+6
Which is NOT a factor of the polynomial function?From the question, we have the following parameters that can be used in our computation:
The polynomial function 4x³ − 7x²+x+6
To check the expression that is not a factor, we set the expression to 0, solve for x and calculate the value of the polynomial at this x value
If the result is not zero (0), then it is not a factor of the polynomial
Using the above as a guide, we have the following:
x - 1 gives x = 1
So, we have
4(1)³ − 7(1)² + (1) + 6 = 4
x - 2 gives x = 2
So, we have
4(2)³ − 7(2)² + (2) + 6 = 12
x + 1 gives x = -1
So, we have
4(-1)³ − 7(-1)² + (-1) + 6 = -6
x + 2 gives x = -2
So, we have
4(-2)³ − 7(-2)² + (-2) + 6 = -56
None of the expressions give a solution of 0
Hence, all of the expressions are not a factor of the polynomial function
Read more about polynomial function at
https://brainly.com/question/7693326
#SPJ1