a purchase occurs when a package of assets are acquired for a single purchase price amount.

The correct  answer is C. MUy - 4 utils and MUz - 20 utils, respectively.Suppose the prices of goods X, Y, and Z are $4, $1, and $5, respectively, and the last unit purchased of good X has a marginal utility (MUx) of 16 utils.

At the point of equilibrium, the marginal utility of the last unit purchased of goods Y and Z can be found using the concept of equal marginal utility per dollar.

For goods X, Y, and Z, the marginal utility per dollar should be equal at equilibrium:[tex]MUx/Price of X = MUy/Price of Y = MUz/Price of Z[/tex], [tex]16/$4 = MUy/$1 = MUz/$5[/tex], [tex]4 = MUy/1 = MUz/5\\[/tex]
Thus, MUy = 4 utils, and MUz = 20 utils.Therefore, the answer is C. MUy - 4 utils and MUz - 20 utils, respectively.

To know more about  marginal utility, refer to the link:

https://brainly.com/question/30841513#

#SPJ11

A streak plate is a method used to isolate individual bacterial colonies from a mixed culture. The plate is divided into four quadrants, and the bacteria are streaked across the surface of the plate.

The initial streak is heavily inoculated, and subsequent streaks are made by dragging the bacteria from the previous streak into the next quadrant. The area of a streak plate that will contain the greatest amount of growth is the initial streak. This is because the bacteria are most heavily inoculated in this area, providing them with the greatest amount of nutrients and space to grow. As a result, the bacteria will multiply rapidly in this area, producing a large and dense colony. Conversely, the area of the streak plate that will contain the least amount of growth is the final streak. This is because the bacteria that are dragged into this area have been significantly diluted by the previous streaks, reducing the number of viable cells present. Additionally, the bacteria in this area may also compete with each other for limited nutrients and space, further limiting their growth. In summary, the initial streak of a streak plate will contain the greatest amount of growth, while the final streak will contain the least amount of growth.

Learn more about streak plate here

https://brainly.com/question/14493687

#SPJ11

The factorial design in this study is a 3x3 design.

This is because there are three levels of physical attractiveness (unattractive, average, or attractive) and three levels of severity of damage caused ($500, $1,500, or $2,500). The combination of these two factors leads to a total of nine possible conditions in the experiment.

The combination of these two independent variables leads to the creation of nine possible experimental conditions.

Each participant in the study is randomly assigned to one of these nine conditions, and the researchers then measure the dependent variable (which may be, for example, attitudes towards the offender or the amount of compensation awarded) in each condition.

Using a factorial design allows the researchers to examine not only the main effects of each independent variable on the dependent variable but also the interaction effects between them.

For example, the researchers may be interested in whether physical attractiveness has a greater impact on the dependent variable when the severity of damage is higher, or whether the severity of damage has a stronger effect when the offender is unattractive.

To learn more about independent, refer below:

https://brainly.com/question/15375461

#SPJ11

If Congress decides to significantly decrease their spending and the Federal Reserve wants to stabilize price levels, the appropriate action would be to buy bonds. The correct option is a. buy bonds.

When Congress decreases spending, it can lead to a contractionary fiscal policy, which may slow down economic growth and reduce aggregate demand. To counteract this effect, the Federal Reserve can implement an expansionary monetary policy by buying bonds in the open market.

By purchasing bonds, the Federal Reserve increases the money supply in the economy, which in turn lowers interest rates. Lower interest rates encourage businesses and consumers to borrow and spend, thereby stimulating economic growth and stabilizing price levels.

Option B, raising the discount rate, would be counterproductive as it would tighten the money supply and further decrease aggregate demand. Option C, encouraging free trade, is more related to international trade policies than price stabilization. Lastly, option D, enacting a tax cut, is a fiscal policy action that would need to be undertaken by Congress, not the Federal Reserve.

In summary, to stabilize price levels when Congress significantly decreases their spending, the Federal Reserve should buy bonds to implement an expansionary monetary policy, thus encouraging borrowing and spending in the economy. The correct option is a. buy bonds.

For more about buy bonds:

https://brainly.com/question/26194238

#SPJ11

(a) For the 1947 survey, the sample proportion of total abstainers is: 0.350 (b) We can see that the sample proportion of total abstainers has decreased from 1947 to the recent survey.

a) 429/1100 = 0.390

For the recent survey, the sample proportion of total abstainers is:

385/1100 = 0.350

(Rounded to three decimal places)

b)However, we cannot make any conclusions about the population proportion based on this information alone.  We would need to conduct further analyses, such as hypothesis testing or confidence intervals, to determine if this difference is statistically significant and to estimate the range of plausible values for the population proportion.

To know more about sample proportion visit:

https://brainly.com/question/13799119

#SPJ11

The statement that correctly does not describe a contemporary approach to create the Work Breakdown Structure (WBS) for a project is option c - "Project teams may rely upon the project manager to create all levels of the WBS".

In a contemporary approach, the project team collaborates to create the WBS, and it is not solely the responsibility of the project manager.

The other options are correct - project teams may jump start the WBS construction with a brainstorming session, use a template or a WBS from a previous project as a starting point, and adopt a top-down approach to construct the WBS.

A contemporary approach involves the project team working together to break down the project into smaller, manageable components to ensure project success. The WBS serves as a framework for project planning and execution, and it is a vital tool for effective project management.

To know more about Work Breakdown Structure refer here:

https://brainly.com/question/30455319#

#SPJ11

Complete Question:

All of the following statements correctly describe a contemporary approach to create the Work Breakdown Structure (WBS) for a project EXCEPT: a. Project teams may jump start the WBSc ruction with a brainstorming session. b. Project teams may use a template or a Wes from a previous project as a starting point.  c. Project teams may rely upon the project manager to create all levels of the WBS. d. Project teams may adopt a top-down approach to construct the WBS.

Pizza Bliss is using several management techniques to ensure efficient delivery of pizza within half an hour of order placement. Some of these techniques include:

1. Specialization of work:  The pizza chain likely has employees who specialize in specific tasks such as preparing the pizza, packaging it, and delivering it.

2. Motion study: This involves analyzing the various movements involved in delivering a pizza, such as how the pizza is placed in the box, how the box is sealed, and how the pizza is handed off to the delivery person

3. Analysis of routes:  Pizza Bliss likely uses mapping software to determine the most efficient routes for their delivery drivers to take.

4. Continuous improvement:  Pizza Bliss is likely constantly analyzing and refining their processes to ensure that they are delivering pizzas as efficiently as possible.

Overall, Pizza Bliss is using a combination of techniques to ensure that they are able to deliver pizzas within half an hour of order placement.

By focusing on efficiency and continuous improvement, they are able to maintain their reputation for fast, reliable service.

To know more about Motion study refer here

https://brainly.com/question/17256211#

#SPJ11

C. cash receipts minus cash payments. Net cash flow is a measure of the cash inflows and outflows of a business or investment during a given period of time.

It represents the difference between the cash received and the cash paid out during that period.

Net cash flow is calculated by subtracting the total cash payments made during the period from the total cash receipts received during the same period. This measure provides insight into the amount of cash a business or investment generates or consumes during a given period, which can be useful for assessing its financial health and ability to meet its financial obligations.

The other options listed are not accurate definitions of net cash flow:

A. Income after taxes minus amortization is net income, which is not the same as net cash flow.

B. Income after taxes minus dividends is also net income and not the same as net cash flow.

D. Cash receipts minus cash payments minus amortization is net cash provided by operating activities in the statement of cash flows, which is a more specific measure of cash flow that only includes cash flows related to operating activities.

Learn more about investment here:

https://brainly.com/question/15353704

#SPJ11

The components of GDP are consumption, investment, government purchases, and net exports.

Transaction 1: You pay a hairdresser for a haircut. This transaction affects consumption because it is a personal expenditure for a service.

Transaction 2: New York hires workers to plow snow after a snowstorm. This transaction affects government purchases because the government is paying for a service.

Transaction 3: Aunt Jane buys a new house from a local builder. This transaction affects investment because it is a purchase of a long-term asset.

Transaction 4: Uncle Henry buys a new refrigerator from a domestic manufacturer. This transaction affects consumption because it is a personal expenditure for a durable good.

Transaction 5: Ford sells a Mustang from its inventory to the Martinez family. This transaction affects consumption because it is a personal expenditure for a durable good.

Transaction 6: Ford manufactures a Focus and sells it to Avis, the car rental company. This transaction affects investment because Avis is purchasing a long-term asset for their business.

Transaction 7: The federal government sends your grandmother a Social Security check. This transaction affects government purchases because the government is paying for a service.

Transaction 8: Your parents buy a bottle of French wine. This transaction affects net exports because it is an import of a good.

Overall, these transactions affect various components of GDP depending on the nature of the transaction and the type of expenditure involved.

To know more about GDP  click here

brainly.com/question/31417652

#SPJ11

a) The main aim of growth accounting is to identify the sources of economic growth, such as changes in capital, labor, and productivity, to inform policymakers on how to stimulate further growth.

b) The main elements in a growth accounting exercise are the growth rates of labor, capital, and output, as well as the capital share in income and the assumption of constant returns to scale.

c) The annual growth rate of output per worker can be calculated by subtracting the annual growth rate of employment from the annual growth rate of output, which is (5% - 3%) = 2%. The annual growth rate of capital per worker can be calculated by subtracting the annual growth rate of employment from the annual growth rate of capital, which is (10% - 3%) = 7%.

d) To calculate the growth in total factor productivity (TFP), we need to use the formula TFP growth = Output growth - (Capital growth * Capital share) - (Labor growth * Labor share). Assuming a capital share of 0.3 and constant returns to scale, we get TFP growth = 5% - (10% * 0.3) - (3% * 0.7) = 2.1%. Therefore, the growth in TFP (technical progress) in Ethiopia during the period 2012-2022 was 2.1% per year.

e) If the capital income share is increased to 0.5, the estimate of technical progress in b) would change because the contribution of capital to output growth would be higher. Using the same formula as in d), we get TFP growth = 5% - (10% * 0.5) - (3% * 0.5) = 1%. Therefore, the estimate of technical progress would decrease from 2.1% to 1% if the capital income share is increased to 0.5.

To learn more about growth accounting, visit: https://brainly.com/question/21129287

#SPJ11

Transactional relationships in a supply chain are also called C. Arm's-length relationships

Transactional relationships in a supply chain are also called arm's-length relationships because they are based on a limited exchange of information, short-term agreements, and a focus on individual transactions rather than long-term collaboration.

Transactional relationships in a supply chain are characterized by a focus on short-term, transactional exchanges between buyers and suppliers. These relationships are often described as arm's-length relationships because they are typically characterized by a lack of long-term commitment or collaboration between the parties.

In contrast, cooperative relationships in a supply chain are characterized by a focus on long-term collaboration, trust, and mutual benefit between buyers and suppliers. Competitive relationships in a supply chain are characterized by a focus on individual gain and a lack of collaboration between buyers and suppliers. Distributive relationships in a supply chain are characterized by a focus on distributing goods or services through intermediaries or third-party distributors

Learn more about transactional here:
https://brainly.com/question/24730931

#SPJ11

The budgeting method that can meet the needs of an organization that must frequently revise their budget is Bottom-up budgeting.

In this method, the budget is created from the bottom-up, meaning that each department or team within the organization submits their budget proposals to the top management.

The top management then reviews these proposals and makes necessary adjustments before finalizing the budget.

This approach ensures that all departments are involved in the budgeting process and have a say in how the budget is allocated. Additionally,

since the budget is based on the actual needs of the departments, it is more likely to be accurate and realistic. On the other hand, Top-down budgeting,

Conventional budgeting, and Zero-based budgeting are all top-down approaches that are less flexible and may not allow for frequent revisions. In Conventional budgeting,

the budget is based on the previous year's budget, with adjustments made for inflation or other factors. In Top-down budgeting, the top management creates the budget and then assigns funds to the departments.

In Zero-based budgeting, the budget starts from scratch, with no consideration given to previous budgets, but this method can be time-consuming and may not be suitable for frequent revisions.

Therefore, Bottom-up budgeting is the best budgeting method for organizations that need to revise their budgets frequently.

To know more aboutorganization that must frequently revise  refer here

https://brainly.com/question/30435439#

#SPJ11

The most common practice for dividend payout among companies is a variation of the "stable dividend policy," which involves paying out a consistent dividend amount or percentage of earnings to shareholders on a regular basis, typically quarterly or annually. This policy is often favored by companies because it provides shareholders with a predictable income stream and helps to maintain the company's reputation and stability.

When Theo Corp. returns $12,000 of undamaged inventory that was originally purchased on the account and not yet paid for, the journal entry recorded on July 6 would be A debit to Accounts Payable and a credit to Inventory. The correct answer is D.

Since Theo Corp. had originally purchased the inventory on account, they had not yet paid for it. Returning the undamaged inventory means that they no longer owe the amount to their supplier, so they need to decrease their Accounts Payable balance by debiting it. At the same time, they are increasing their Inventory balance by crediting it for the returned items.

Thus, option D is correct: a debit to Accounts Payable and a credit to Inventory.

To know more about debit and credit visit: https://brainly.com/question/13290364

#SPJ11

On Aug 4: Debit Raw Materials Inventory $14,200; Credit Accounts Payable $14,200, And on Aug 31: Debit- Work in Process Inventory, Job 50 $4,828 and 56 $5,820; Credit: Raw Materials Inventory $10,648.

a) On Aug 4:

To record the purchase of raw materials on account:-

Debit: Raw Materials Inventory for the cost of 710 units of materials at $20 per unit, which equals $14,200.

Credit: Accounts Payable for the same amount of $14,200 to record the liability.

b) On Aug 31:

To record the requisition of raw materials from the storeroom and their use in production:

Debit: Work in Process Inventory, Job 50 for the cost of 284 units of raw materials at $17 per unit, which equals $4,828.

Debit: Work in Process Inventory, Job 56 for the cost of 291 units of raw materials at $20 per unit, which equals $5,820.

Credit: Raw Materials Inventory for the total cost of raw materials requisitioned, which equals $10,648.

To know more about Journal entries:

brainly.com/question/28390337

#SPJ4

In 1946, NECA contractors contributed 2% of their gross payroll to the new National Electrical Benefit Fund. This fund was established to provide retirement benefits and other welfare benefits to members of the International Brotherhood of Electrical Workers (IBEW) and their families.

In 1977, the contribution rate was increased to 3% of gross payroll. This increase was made to ensure that the fund had enough money to meet the growing demands of the membership. The National Electrical Benefit Fund continues to provide valuable benefits to IBEW members and their families today. These benefits include retirement, disability, and death benefits, as well as health care coverage and other welfare benefits. The fund is managed jointly by representatives of NECA and the IBEW, ensuring that the interests of both labor and management are represented. Overall, the National Electrical Benefit Fund is a critical component of the compensation package for IBEW members, and has helped to provide financial security for generations of electrical workers and their families.

Know more about NECA contractors here:

https://brainly.com/question/15090417

#SPJ11

A company reports $22 million in pretax profits , its current tax = $6 m n and tax expense = $ 5.5 m n .

Current Tax = Taxable Income × Tax rate

                        =      $24 m n × 25 %

                                  = $6 m n

2. Tax Expense = $22 m n. x 25%

                                   $ 5.5 m n

1. Profit & loss                 $6 m n

Current tax                   $ 6 m n

[ For recording tax expenses ]

2. Differed tax income                       $0.05 m n

  Profit & loss                                        $ 0.05 m n

[For recording differed tax income ]

3. Differed tax assets                           $  0.05 m n

Differed tax income                                $ 0.05 m n

[ for creating deferred tax assets ]

A balance sheet item that reduces a company's taxable income in the future is known as a deferred tax asset. When a company overpays its taxes, this line item asset is found. This cash will ultimately be gotten back to the business as expense alleviation.

A conceded charge resource is something contrary to a conceded charge risk, which demonstrates a normal expansion in how much personal duty owed by an organization. It is critical to take note of that a conceded charge resource is perceived just when the contrast between the misfortune worth or devaluation of the resource is supposed to balance its future benefit.

Learn more about Deferred tax assets :

brainly.com/question/29993010

#SPJ4

Banks are highly regulated because A: "individual depositors need protection against corrupt business practices", B: "banks can easily fail if many customers try to take all their cash out", and C: "banks are the institutions through which money is created, and variations in the quantity of money have important effects on the economy as a whole" Option D: " all of the above".

Banks are highly regulated for several reasons, including the need to protect individual depositors against corrupt business practices, the potential for banks to fail if many customers try to withdraw their funds at once, and the fact that banks are the institutions through which money is created, with variations in the quantity of money having significant effects on the overall economy. Regulations help ensure that banks operate in a safe and sound manner, reducing the risk of financial instability and protecting consumers.

Governments and regulatory agencies implement various rules and standards to ensure that banks are adequately capitalized, maintain appropriate levels of liquidity, and comply with anti-money laundering and other legal requirements. By regulating banks, authorities seek to promote financial stability, protect consumers, and maintain the overall health of the financial system.

The correct answer is D. All of the above.

You can learn more about Banks at

https://brainly.com/question/29547955

#SPJ11

A. "New-to-the-market products" carry the most potential (and risk) for the company introducing them.

New-to-the-market products refer to completely new products that have never existed before in the market. These products have the potential to offer entirely new benefits and address needs that were previously unfulfilled. However, they also carry the most risk for the company introducing them, as they are untested and may not be successful in the market.

New-to-the-market products require significant investment in research and development, testing, and marketing, but the potential rewards can be significant if the product is successful.

Option A is answer.

You can learn more about New products at

https://brainly.com/question/28013469

#SPJ11

D) Short-run aggregate supply will shift to the left  which will occur because of the automatic mechanism adjusting the economy back to potential GDP?

When the economy is at a short-run equilibrium GDP that lies above potential GDP, it means that there is an excess demand for goods and services, which leads to upward pressure on prices. As prices increase, firms will increase their production in the short-run, leading to an increase in output and employment. However, this increase in output and employment is not sustainable in the long run because it is not supported by an increase in potential GDP.
Therefore, the automatic mechanism that adjusts the economy back to potential GDP is a decrease in short-run aggregate supply. This occurs as input prices increase due to the increase in production, leading to a decrease in profits and a decrease in the willingness of firms to supply goods and services. As a result, the short-run aggregate supply curve shifts to the left, reducing output and employment back to potential GDP levels. Prices may also decline as a result of this adjustment.

Learn more about aggregate supply here:

https://brainly.com/question/31191847

#SPJ11

Newer and smaller companies are typically inclined to use the "what we can afford" method when developing marketing communications budgets. This method involves allocating resources based on what the company can afford to spend, rather than using a predetermined percentage of sales or trying to match the spending of competitors.

The "what we can afford" method is popular among newer and smaller businesses because it allows for flexibility and control over spending, especially when resources may be limited. These companies may not have a long sales history or established market presence, making it challenging to determine appropriate marketing expenditures based on sales or competition. By focusing on what they can afford, these businesses can tailor their marketing efforts to fit their current financial situation, which may change as the company grows and evolves.

However, it's important to note that this method has its drawbacks. One major limitation is that it may lead to underinvestment in marketing, potentially hindering growth and market penetration. Additionally, it does not take into consideration market trends or competitor actions, which could leave a company at a disadvantage.

In conclusion, the "what we can afford" method is commonly used by newer and smaller companies when developing marketing communications budgets due to its flexibility and control over spending. While it has its benefits, it's essential for companies to be aware of its limitations and consider alternative approaches as they grow and gain a better understanding of their market and competition.

Learn more about companies here:

https://brainly.com/question/30611924

#SPJ11

According to Michael Porter, the problem with many publicly traded companies is B. Many publicly traded companies have defined value creation too narrowly in terms of financial performance.

One of the main problems with a narrow focus on financial performance is that it can lead to a short-term perspective.

Companies that are primarily concerned with meeting quarterly earnings targets or maximizing shareholder returns may neglect longer-term investments in research and development, employee training, and other areas that are critical for sustained growth.

This short-term focus can also lead to a lack of innovation, as companies may be hesitant to invest in new technologies or products that do not have an immediate payoff.

Another problem with a narrow focus on financial performance is that it can lead to a narrow definition of value. By prioritizing financial metrics, companies may overlook other important factors that contribute to value creation, such as customer satisfaction, employee engagement, and social responsibility.

This can create a disconnect between a company's financial performance and its overall impact on society, which can ultimately harm the company's reputation and long-term viability.

To learn more about Michael Porter, refer below:

https://brainly.com/question/29461306

#SPJ11

The duration of this bond price is approximately 6.96 years, which corresponds to option (d) in your list of choices.

To calculate the duration of the bond, we need to use the formula for modified duration:

Modified Duration = (Price Change / Initial Price) / Yield Change

First, let's find the price change and the yield change:

Price Change = New Price - Initial Price = $1,031 - $1,050 = -$19
Yield Change = Increase in Yield = 0.26% = 0.0026

Now, we can plug the values into the formula:

Modified Duration = (-$19 / $1,050) / 0.0026

Modified Duration ≈ -0.0181 / 0.0026 ≈ -6.96

The duration of this bond is approximately 6.96 years, which corresponds to option (d) in your list of choices.

For more information on bond price duration refer https://brainly.com/question/30310681

#SPJ11

In contrast to convenience products, "shopping" products are goods or services for which customers will spend time and effort to gather information on price, attributes, and quality.

Shopping products are typically more expensive and considered to be of higher value than convenience products. Customers are willing to spend more time and effort researching and evaluating their options before making a purchase decision.

Examples of shopping products include clothing, electronics, furniture, and automobiles. Customers will typically compare different brands and models, evaluate features and benefits, and consider factors such as price, quality, and style before making a purchase decision. In contrast, convenience products are those goods or services that customers will typically purchase frequently, with little or no planning, and with minimal effort. Examples of convenience products include snacks, soft drinks, and other low-cost items that are readily available and easy to purchase.

Learn more about attributes here:

https://brainly.com/question/28163865

#SPJ11

An analyst should expect Wyatt to have a lower beta than its industry.

What is lower beta?

A stock's beta measures its volatility compared to the overall stock market. A stock with a beta that is less than 1 is considered a lower beta stock than the market.

Wyatt Materials' lower fixed costs suggest that it has a lower level of risk compared to its peers in the industry, leading to a lower beta. Beta measures an asset's sensitivity to market movements, and in this case, Wyatt's lower fixed costs may result in less volatility in its earnings and stock price.

Therefore, an analyst should expect Wyatt to have a lower beta than its industry.

To know more about lower beta visit

https://brainly.com/question/30295625

#SPJ11

The best strategy for college graduates is to focus on developing skills in fields related to the information-based global revolution. This may include technology, data analysis, digital marketing, and other related areas. It is also important to stay up-to-date with the latest developments in these fields and to continue learning and adapting to new technologies and trends.

Additionally, networking and building connections with professionals in these industries can be highly beneficial in securing job opportunities and staying informed about career prospects. Overall, prioritizing skills and knowledge relevant to the evolving economy can help college graduates thrive in the job market and succeed in their careers.

1. Develop a strong foundation in information technology and related fields, as these skills will be crucial in the information-based global economy.

2. Cultivate a global perspective and understanding of different cultures, as businesses and interactions will increasingly take place across borders.

3. Focus on building strong communication and interpersonal skills, as these will remain important in service jobs and in the information-based economy.

4. Continuously learn and adapt to new technologies and industry trends, to stay competitive in the job market.

5. Consider gaining experience in both service jobs and information-based fields, to be more versatile and better prepared for the evolving economy.

To know more about the global revolution here:

brainly.com/question/29059481

#SPJ11

A. rising productivity.

Economists say that long-run economic growth is almost entirely due to rising productivity

Long-run economic growth refers to the sustained increase in an economy's output over time. Rising productivity is the primary driver of long-run economic growth as it allows for more goods and services to be produced with the same amount of resources. This can come from technological advances, increased education and training, or better organization of production processes. Population growth can contribute to short-term economic growth but does not necessarily lead to sustained long-run growth. A democratically elected government, a balanced budget, and perfectly competitive markets can all contribute to economic efficiency and growth in the short-run, but they are not sufficient conditions for sustained long-run growth.

Learn more about Long-run economic growth here:
https://brainly.com/question/30664293

#SPJ11

The company's gross profit ratio is approximately 0.898, or 89.8%. To calculate the gross profit ratio for Adams Corporation, we first need to find the gross profit and then divide it by net sales.

Here's how to do that using the provided information:

1. Calculate the cost of goods sold (COGS): Beginning inventory + Purchases - Ending inventory
  Ending inventory = Beginning inventory + Purchases - Flood loss
  Ending inventory = $180,000 + $420,000 - $74,400 = $525,600

2. Calculate the cost of goods sold (COGS):
  COGS = Beginning inventory + Purchases - Ending inventory
  COGS = $180,000 + $420,000 - $525,600 = $74,400

3. Calculate the gross profit: Net sales - COGS
  Gross profit = $730,000 - $74,400 = $655,600

4. Calculate the gross profit ratio: Gross profit / Net sales
  Gross profit ratio = $655,600 / $730,000 = 0.898

To know more about gross profit ratio visit:

https://brainly.com/question/29785269

#SPJ11

The following is not relevant to management's decision regarding refinishing the tables or selling them as: The additional $300,000 revenue that can be generated if the tables are refinished. The correct answer is A.

The decision to refinish the tables or sell them as seconds is a choice between two alternatives, and the relevant costs and revenues are those that differ between the alternatives.

In this case, the relevant costs are the additional $315,000 cost to refinish the tables, and the relevant revenues are the $305,000 that the tables can be sold for as seconds or the $605,000 that they can be sold for if they are refinished.

The $355,000 manufacturing cost of the tables already incurred is a sunk cost and is not relevant to the decision because it cannot be recovered regardless of the decision made.

The effect of selling "seconds" on Fancy's reputation as a fine-furniture manufacturer is relevant because it may affect the company's future sales and profitability.

However, the additional $300,000 revenue that can be generated if the tables are refinished is a relevant factor and should be considered in the decision-making process.

To know more about revenue, refer here:

https://brainly.com/question/28528039#

#SPJ11

Complete question:

Fancy Furniture produced a batch of 2,000 coffee tables at a cost of $355,000. It was discovered that the entire batch was finished improperly. Fancy can sell the tables as seconds for $305,000 or spend an additional $315,000 to refinish them and sell them for $605,000.

Which of the following is not relevant to management's decision regarding refinishing the tables or selling them as is?

a. The additional $300,000 revenue that can be generated if the tables are refinished.

b. The $355,000 manufacturing cost of the tables already incurred.

c. The additional $315,000 cost to refinish the tables.

d. The effect of selling "seconds" on Fancy's reputation as a fine-furniture manufacturer.