A person was driving their car on an interstate highway and a rock was kicked up and cracked their windshield on the passenger side.
The driver wondered if the rock was equally likely to strike any where on the windshield, what the probability was that it would have cracked the windshield in his line of site on the windshield. Determine this probability, provided that the windshield is a rectangle with the dimensions 28 inches by 54 inches and his line of site through the windshield is a rectangle with the dimensions 30 inches by 24 inches.

Answer:

-8.5

Step-by-step explanation:

First we need to get the -4x by it self which means moving the 8 so what we need to do is subtract 8 from its self and what we do on one side we do to the other so 42-8=34 then the last thing to do is just divided 34 divided by -4 and we get

-8.5 as the answer.

PLS GIVE BRAINLIST MEAN THE WORLD

HAVE A GREAT DAY!!

The value of x that would make M the midpoint of PQ if PM = 3x-1 and PQ = 5x+3 include the following: 2.

In Mathematics, the midpoint of a line segment with two end points can be calculated by adding each end point on a line segment together and then divide by two (2).

Since M is the midpoint of line segment PO, we have the following:

Line segment PM = Line segment PQ

3x - 1 = 5x + 3

5x - 3x = 3 + 1

2x = 4

x = 4/2

x = 2

PM = 3x - 1 = 3(2) - 1 = 6 - 1 = 5 units.

PQ = 5x + 3 = 5(2) + 3 = 10 + 3 = 13 units.

Read more on midpoint here: brainly.com/question/17918978

#SPJ1

The 90% confidence interval for the average fee for checking a single bag is $21.71 to $28.29, which corresponds to option B) $25 + $3.29

To calculate a 90% confidence interval for the average fee for checking a single bag.

To calculate a 90% confidence interval, we need the sample mean (X), the standard deviation (σ), and the sample size (n). From your question, we have:

X = $25
σ = $6
n = 9

Since we know the standard deviation, we can use the z-score for a 90% confidence interval, which is 1.645 (you can find this in a standard z-table).

Next, we need to calculate the standard error (SE), which is the standard deviation divided by the square root of the sample size:

[tex]SE=\frac{σ}{\sqrt{n} }[/tex]
[tex]SE=  \frac{ 6}{\sqrt{9} }[/tex]
[tex]SE=  \frac{ 6}{3 }[/tex]
SE = $2

Now, multiply the z-score by the standard error:

Margin of Error (ME) = 1.645 × SE
ME = 1.645 × $2
ME = $3.29

Finally, construct the 90% confidence interval by adding and subtracting the margin of error from the sample mean:

Lower Limit: X - ME = $25 - $3.29 = $21.71
Upper Limit: X + ME = $25 + $3.29 = $28.29

Thus, the 90% confidence interval for the average fee for checking a single bag is $21.71 to $28.29, which corresponds to option B) $25 + $3.29.

To know more about "Standard deviation" refer here:

https://brainly.com/question/23907081#

#SPJ11

Answer:

87

Step-by-step explanation:

first you need to know the median is the middle of the data set.

so 81, 83, 91, 94 the middle is 83 and 91 but you match inbetween both of those so the answer would be 87.

Hope this helps!! good luck

all four properties are satisfied, we can conclude that (M,d) is a metric space.

What is metric space?

In mathematics, a metric space is a set of objects called points, together with a function called the distance function or metric, that defines a notion of distance between any two points in the space. The metric satisfies certain conditions to ensure that it is a useful measure of the "distance" between points, such as being non-negative, symmetric, and satisfying the triangle inequality. Metric spaces are used to study properties of objects that can be thought of as having a notion of distance, such as Euclidean space, graphs, and networks.

Let's check each of these properties:

Non-negativity: This property holds since d(x, y) is defined to be 0 or 1, both of which are non-negative.

Identity of indiscernibles: This property also holds since d(x, y) is defined to be 0 if and only if x = y.

Symmetry: This property holds since d(x, y) = d(y, x) for any x, y in M.

Triangle inequality: For any x, y, z in M, there are three cases to consider:

If x = y or y = z, then d(x, y) + d(y, z) = d(x, z) = 1 by definition, and the inequality holds.

If x = z, then both sides of the inequality are 0.

If x, y, and z are all distinct, then d(x, y) + d(y, z) = 2 and d(x, z) = 1, so the inequality holds.

Since all four properties are satisfied, we can conclude that (M,d) is a metric space.

Learn more about metric space, by the following link.

https://brainly.com/question/31129859

#SPJ4

The numbers that are arranged from greatest to least are

Let's first rewrite the given options in a clearer way and compare the numbers:

A) 1.6 x 10^0; 1.62 x 10^1; 1.7 x 10^(-1)

B) 1.62 x 10^4; 1.6 x 10^1; 1.7 x 10^1

C) 1.6 x 10^0; 1.7 x 10^0; 1.62 x 10^4

D) 1.62 x 10^0; 1.7 x 10^0; 1.6 x 10^1

Simplifying the numbers

Option A:

1.6 x 10^0 = 1.6; 1.62 x 10^1 = 16.2; 1.7 x 10^(-1) = 0.17

not in descending order

Option B:

1.62 x 10^4 = 16200; 1.6 x 10^1 = 16; 1.7 x 10^1 = 17

in descending order

Option C:

1.6 x 10^0 = 1.6; 1.7 x 10^0 = 1.7; 1.62 x 10^4 = 16200

in descending order

Option D:

1.62 x 10^0 = 1.62; 1.7 x 10^0 = 1.7; 1.6 x 10^1 = 16

not in descending order

Hence we can say that options B and C correctly sorted numbers from highest to lowest as follows:

Learn more about highest to lowest at

https://brainly.in/question/14704786

#SPJ`

Answer:

The type of study conducted is an observational study. The response variable of the study is the concentration of the chemical.

The maximum height of the toy plane is approximately 6.5 meters. Option A is correct.

The maximum height of the toy plane can be determined using the laws of motion and basic kinematics.

The equation for the height of the toy plane as a function of time, assuming no air resistance, can be represented by a quadratic equation in the form of;

h(t) = [tex]h_{0}[/tex] + [tex]V_{0}[/tex]t - (1/2)[tex]gt^{2}[/tex]

where; h(t) is the height of the plane at time t,

[tex]h_{0}[/tex] is the initial height (given as 4 meters),

[tex]V_{0}[/tex] is the initial velocity (given as 7 meters per second),

g is the acceleration due to gravity (which is approximately 9.8 m/s² on Earth), and

t is the time.

To find the maximum height of the plane, we need to determine the time at which the plane reaches its highest point. At this point, the vertical velocity of the plane becomes zero, before it starts to fall back to the ground.

The vertical velocity of the plane can be represented as;

[tex]V_{(t)}[/tex] = [tex]V_{0}[/tex]  -  [tex]g_{t}[/tex]

Setting v(t) to zero and solving for t, we get:

0 =[tex]V_{0}[/tex]  - [tex]g_{t}[/tex]

[tex]g_{t}[/tex] = [tex]V_{0}[/tex]

t = [tex]V_{0}[/tex]  / g

Substituting the given values for [tex]V_{0}[/tex]  and g into the equation;

t = 7 m/s / 9.8 m/s²

t ≈ 0.714 seconds

So, the time taken for the toy plane to reach its highest point is approximately 0.714 seconds.

Now, we can substitute this value of t into the equation for h(t) to find the maximum height of the plane;

[tex]h_{(t)}[/tex]  =  [tex]h_{0}[/tex] + [tex]V_{0}[/tex] t - (1/2)[tex]gt^{2}[/tex]

[tex]h_{(t)}[/tex] = 4 m + 7 m/s × 0.714 s - (1/2) × 9.8 m/s² × (0.714 s)²

Calculating the above expression, we get:

[tex]h_{(t)}[/tex]  ≈ 6.46 meters

Therefore, the maximum height of the toy plane is near by 6.5 meters.

Hence, A. is the correct option.

To know more about maximum height here

https://brainly.com/question/9315508

#SPJ1

Answer:

x = -6

Step-by-step explanation:

you have given

10x + 8y = 12 and 4x + y = -15

so you must put the one var. x or y by same cofficent and in opposite sighn

so 10x + 8y = 12

- 8 (4x + y = -15 ) ......... i multiplied by -8

10x + 8y = 12

-32x - 8y = 120

then you will add the equation

(10x + 8y) + (-32x - 8y) = 12 + 120

afeter you simlify it u will get

-22x = 132

-22x = 132

x = -6 .... by dividing both sides by -22

Answer:

(-6,9)

Step-by-step explanation:

Multiply 4x + y = -15 all the say through by -8 and then add to 10x + 8y = 12

-32x -8y =  120

10x + 8y = 12

-22x =  132  Divide both sides by -22

x = -6

Substitute -6 for x

4x + y = -15

4(-6) + y = -15

-24 + y = -15  Add 24 to both sides

y = 9

Check

10x + 8y = 12

10(-6) + 8(9) = 12

-60 + 72 = 12

12 = 12  checks

4x + y = -15

4(-6) + 9 = -15

-24 + 9 = -15

-15 = -15 Checks.

Helping in the name of Jesus.

The number of frames that the welders would be able to complete in 4 hours would be 10 frames.

The time taken by one welder is 8 hours for one frame which means the work rate would be:

= 1 / 8

= 1 / 8 frames per hour

If we have 20 welders therefore, the work rate per hour would be :

= 1 / 8 x 20

= 2. 5 frames per hour

Given 4 hours, the number of frames they would make is:

= 2. 5 x 4 hours

= 10 frames

Find out more on welding at https://brainly.com/question/16180158

#SPJ1

First part of question is:

A welding company produces burglar frames for windows and doors. In order to complete one frame, one welder needs 8 hours.

The number of blocks needed to complete the big or full cube depends on size of cube. So, number of blocks required to complete it equals to 45.

A cube is a three-dimensional geometry, which may be solid or hollow and containing six equal squares. According to the shape of the cube, we can make a cube from any cubes. Now look at the cube image above. There is one more layer of blocks to fill in because the blocks are still 5 blocks by 4 blocks (not make a cube). We need to add another 25 blocks at the top to meet the cube definition. Some times we would often just count the missing blocks which is 20 here but after adding all 20 blocks in figure still it isn't a cube. So, 20 is wrong because the sides won’t be equal. The width and the length is made of 5 blocks but the height is just four blocks. So, it's need to add another 25 blocks the top to make it a cube. Hence, the correct answer is 45.

For more information about cube, visit :

https://brainly.com/question/13329957

#SPJ4

Complete question:

The above figure complete the question.

How many blocks are needed to complete the full cube ?

28°49€  arc unit into time is approximately 1.867 hours.

We'll convert the given angles from degrees, minutes, and seconds (or cents and euros as placeholders) to degrees in decimal form. Then, we'll convert the angle from arc units to time units.

a) 39°50¢
To convert 50¢ to degrees, divide by 60 (since 1 degree = 60 minutes):
50¢ / 60 = 0.8333 (rounded to four decimal places)

So, 39°50¢ in decimal form is:
39 + 0.8333 = 39.8333°

b) 42°35¢
To convert 35¢ to degrees:
35¢ / 60 = 0.5833 (rounded to four decimal places)

So, 42°35¢ in decimal form is:
42 + 0.5833 = 42.5833°

c) 15°20€
To convert 20€ to degrees (1 degree = 3600 seconds):
20€ / 3600 = 0.0056 (rounded to four decimal places)

So, 15°20€ in decimal form is:
15 + 0.0056 = 15.0056°

d) 1°59€
To convert 59€ to degrees:
59€ / 3600 = 0.0164 (rounded to four decimal places)

So, 1°59€ in decimal form is:
1 + 0.0164 = 1.0164°

Now, we'll convert 28°49€ from arc units to time units:
28°49€ = 28 + (49 / 3600) = 28.0136° (in decimal form)

To convert degrees to time units, multiply by 24 (since there are 24 hours in a day) and divide by 360 (since there are 360 degrees in a circle):

28.0136° * (24 / 360) = 1.867 (rounded to three decimal places)

So, 28°49€ in time units is approximately 1.867 hours.

To learn more about degree

https://brainly.com/question/8306416

#SPJ11

To find the rate of depreciation after 2 years, we need to find the derivative of this function at t = 2.
V(t) = 23,351(0.783)^t
V'(t) = 23,351(0.783)^t * ln(0.783)  [Using the chain rule]

V'(2) = 23,351(0.783)^2 * ln(0.783) ≈ -2,346.29

Since we are interested in the absolute value of the rate of depreciation, we can ignore the negative sign. Therefore, the car is depreciating at $2,346.29 per year (rounded to the nearest cent).

Note that this is the instantaneous rate of depreciation at t = 2. The average rate of depreciation over the first two years would be the difference in resale value divided by the number of years, which would be:

[(23,351(0.783)^2) - 23,351] / 2 ≈ $2,336.67 per year
Hi! To find the rate of depreciation after 2 years, we need to first determine the resale value of the car after 2 years and then find the difference in value per year. Here's a step-by-step explanation:

1. Plug in the given years (t=2) into the formula for the estimated resale value: V(t) = 23,351(0.783^t)
2. Calculate the resale value after 2 years: V(2) = 23,351(0.783^2) ≈ 14,342.76 (rounded to the nearest cent)
3. Find the depreciation value by subtracting the resale value from the initial value: Depreciation = Initial Value - Resale Value = 23,351 - 14,342.76 ≈ 9,008.24
4. Calculate the rate of depreciation per year: Rate of Depreciation = Depreciation / Years = 9,008.24 / 2 ≈ 4,504.12

The car is depreciating at approximately $4,504.12 per year after 2 years, rounded to the nearest cent.

Learn more about :

Depreciation : brainly.com/question/29748690

#SPJ11

The 98% confidence interval for the population mean is (1473.06, 1806.94).

The parameters needed to calculate a confidence interval are:

Sample mean (x) = 1640

Population standard deviation (σ) = 325

Sample size (n) = 25

Confidence level = 98%

To find the confidence interval, we can use the formula:

CI = x ± z*(σ/√n)

where z* is the z-score associated with the desired confidence level.

Since the confidence level is 98%, we need to use the z-score associated with a tail probability of 0.01 (0.5% on each tail). From the table given, this is z0.005 = 2.576.

Substituting the values, we get:

CI = 1640 ± 2.576*(325/√25) = 1640 ± 166.94

Therefore, the 98% confidence interval for the population mean is (1473.06, 1806.94).

Learn more about confidence interval at https://brainly.com/question/31684473

#SPJ11

The surface area of a surface parametrized by a function f(s, t), we use the formula:

Surface Area = ∫∫ √[f_s(s,t)^2 + f_t(s,t)^2 + 1] ds dt

The formula above calculates the surface area by integrating the square root of the sum of the squares of the partial derivatives of f with respect to s and t, plus one, over the surface.

Essentially, the formula is finding the magnitude of the gradient of the surface, which gives the rate of change of the surface in all directions.

Surface Area = ∫∫ √[f_s(s,t)^2 + f_t(s,t)^2 + 1] ds dt

The surface area formula can be used to find the surface area of various types of surfaces, such as parametric surfaces, implicit surfaces, and surfaces of revolution.

However, the integration required to evaluate the formula can be quite challenging, especially for complex surfaces. In such cases, numerical methods may be used to approximate the surface area.

Learn more about Surface area:

brainly.com/question/29298005

#SPJ11

To prove that 12 | n^2 - 1 for all values where n = 6k + 1, we can use modular arithmetic.

First, let's simplify n^2 - 1:

n^2 - 1 = (6k + 1)^2 - 1
= 36k^2 + 12k
= 12(3k^2 + k)

So we need to show that 12 divides (3k^2 + k) for all values of k.

We can use modular arithmetic to prove this. Let's consider k modulo 3:

If k ≡ 0 (mod 3), then 3k^2 + k ≡ 0 (mod 3).
If k ≡ 1 (mod 3), then 3k^2 + k ≡ 4 (mod 3).
If k ≡ 2 (mod 3), then 3k^2 + k ≡ 2 (mod 3).

So in all cases, 3k^2 + k ≡ 0 (mod 3) or 3k^2 + k is divisible by 3.

Now let's consider k modulo 4:

If k ≡ 0 (mod 4), then 3k^2 + k ≡ 0 (mod 4).
If k ≡ 1 (mod 4), then 3k^2 + k ≡ 0 (mod 4).
If k ≡ 2 (mod 4), then 3k^2 + k ≡ 2 (mod 4).
If k ≡ 3 (mod 4), then 3k^2 + k ≡ 0 (mod 4).

So in all cases, 3k^2 + k is divisible by 4 if k is even, and if k is odd then 3k^2 + k is divisible by 2.

Therefore, 3k^2 + k is always divisible by 12, and so n^2 - 1 = 12(3k^2 + k) is always divisible by 12 when n = 6k + 1.

#SPJ11

Learn more on: https://brainly.com/question/28551149

Answer:

The mass of the car rounded to the nearest kilogram is 1990 kg, which has an error interval of 1989.5 kg ≤ car mass < 1990.5 kg.

The mass of the person rounded to 1 decimal place is 58.7 kg, which has an error interval of 58.65 kg ≤ person mass < 58.75 kg.

To find the error interval for the combined mass, we need to add the lower and upper bounds of the two intervals:

1989.5 kg + 58.65 kg = 2048.15 kg

1990.5 kg + 58.75 kg = 2049.25 kg

Therefore, the error interval for the combined mass, m, of the car and the person is: 2048.15 kg ≤ m < 2049.25 kg

Answer:

To find the error interval for the combined mass of the car and the person, we need to consider the possible maximum and minimum values for the masses.

For the car, since it is rounded to the nearest kilogram, the actual mass could be anywhere between 1989.5 kg and 1990.5 kg.

For the person, since it is rounded to 1 decimal place, the actual mass could be anywhere between 58.65 kg and 58.75 kg.

To find the maximum and minimum combined masses, we add the maximum possible mass of the car (1990.5 kg) to the maximum possible mass of the person (58.75 kg) and we add the minimum possible mass of the car (1989.5 kg) to the minimum possible mass of the person (58.65 kg):

Maximum combined mass = 1990.5 kg + 58.75 kg = 2049.25 kg

Minimum combined mass = 1989.5 kg + 58.65 kg = 2048.15 kg

Therefore, the error interval for the combined mass, m, of the car and the person is:

2048.15 kg ≤ m < 2049.25 kg

In a PivotTable, you can group data by date or number field types. To do this, follow these steps:

1. Select your PivotTable by clicking on any cell within it.
2. Choose the date or number field you want to group.
3. Right-click the selected field and click "Group" from the context menu.
4. In the Grouping dialog box, specify the grouping options based on your preferences (e.g., grouping by months, years, or specific intervals).
5. Click "OK" to apply the grouping.

Please note that grouping data by calculated, filtered, logical parameters, text, incremental, or value field types is not directly supported in a PivotTable.

To learn more about PivotTable

https://brainly.com/question/30154540

#SPJ11

The answer is: True. When matrix A is upper triangular, its eigenvalues are located on its main diagonal. If you find the eigenvectors corresponding to each eigenvalue, you can construct an eigenvector matrix S.

An upper triangular matrix is a square matrix in which all entries below the main diagonal are zero. An eigenvector of a matrix A is a nonzero vector x such that Ax is a scalar multiple of x. That is, there exists a scalar λ such that Ax = λx.
For a complete upper triangular matrix, all of its eigenvalues are on the diagonal. To see this, consider the characteristic polynomial of a complete upper triangular matrix:
p(λ) = det(A - λI)
where I is the identity matrix. Since A is upper triangular, its determinant is the product of its diagonal entries, and det(A - λI) is a polynomial of degree n (the size of the matrix) in λ. Therefore, there are n roots of p(λ), which correspond to the eigenvalues of A. Since A is completely upper triangular, all of its eigenvalues are on the diagonal.

Now, let's consider the eigenvector matrix S of A. This is a matrix whose columns are the eigenvectors of A. Since A is upper triangular, any eigenvector of A must also be upper triangular (or zero). Therefore, the eigenvector matrix S must also be upper triangular. In summary, if a is a complete upper triangular matrix, then all of its eigenvalues are on the diagonal, and its eigenvector matrix S is upper triangular. Therefore, the statement is true.
"If A is a complete upper triangular matrix, then it has an upper triangular eigenvector matrix S." When a matrix A is upper triangular, its eigenvalues are located on its main diagonal. If you find the eigenvectors corresponding to each eigenvalue, you can construct an eigenvector matrix S. Since A is upper triangular, the eigenvector matrix S will also be upper triangular.

Learn more about matrix here: brainly.com/question/28180105

#SPJ11

Stephen's net income is $287.78.

Stephen earns $11 per hour at his job and worked for 32 hours. The gross income (income before deduction) is:

gross income = 11 * 32 = $352

Stephen's net income is the money left afer deducting federal income tax, Social Security, and Medicare.

Net income = $352 -  $37.30 -  $21.82 -  $5.10

Net income = $287.78

Learn more about  net income on:

https://brainly.com/question/15530787

#SPJ1

The function graphed is defined as follows:

y = -2(x - 2)² + 3.

The equation of a parabola of vertex (h,k) is given by the equation presented as follows:

y = a(x - h)² + k.

In which a is the leading coefficient.

The coordinates of the vertex in this problem are given as follows:

(2,3).

Hence the parameters are h = 2 and k = 3, thus:

y = a(x - 2)² + 3

When x = 0, y = -5, hence the leading coefficient a is obtained as follows:

-5 = 4a + 3

4a = -8

a = -2.

Thus the equation is:

y = -2(x - 2)² + 3.

More can be learned about quadratic functions at https://brainly.com/question/1214333

#SPJ1

We do not have sufficient evidence to conclude that 20-year-olds have more cavities than 30-year-olds.

First, we need to calculate the sample mean and standard deviation of the given data:

x = (6+7+7+8+7+8+9+6+5+6+7+8+7+6+9+8)/16 = 7

s = sqrt((Σ(x - x)²)/(n-1)) = sqrt((Σ(x²) - n(x)²)/(n-1)) = 1.247

Now, we can set up the hypothesis test:

H0: μ = 7 (20-year-olds have the same average number of cavities as 30-year-olds)

Ha: μ > 7 (20-year-olds have more cavities than 30-year-olds)

We will use a t-test since the population standard deviation is unknown and we have a small sample size (n = 16). The test statistic is:

t = (x - μ) / (s/sqrt(n)) = (7 - 7) / (1.247/sqrt(16)) = 0

The degrees of freedom is n-1 = 15. Using a t-table with α = 0.05 and df = 15, we find the critical value to be 1.753.

The p-value is the probability of getting a t-value as extreme or more extreme than the calculated t-value under the null hypothesis. Since our null hypothesis is that μ = 7 and our alternative hypothesis is that μ > 7, we have a one-tailed test. Using a t-table with df = 15, we find the p-value to be 0.5.

Since our p-value (0.5) is greater than α (0.05), we fail to reject the null hypothesis. We do not have sufficient evidence to conclude that 20-year-olds have more cavities than 30-year-olds.

To learn more about hypothesis visit:

https://brainly.com/question/29519577

#SPJ11

Answer:

44 degrees

Step-by-step explanation:

To solve this problem you can subtract 70 by 26. You can do this because those two angles add to the more significant angle. Therefore, to solvr this all you have to do is subtract 70-26. Doing so gives you your answer of 44 degrees

Answer:

m = +/- 5

Step-by-step explanation:

We can solve the equation by taking the fourth root of both sides.  

[tex]+/-\sqrt[4]{m^4}=+/-\sqrt[4]{625} \\m=5\\m=-5[/tex]

(5)(5)(5)(5) = 625

(-5)(-5)(-5)(-5) = 625

The +/- in the answers come from the fact that whenever you have a even exponent (e.g., x^2 or m^4), you always get a positive answer, even if the base you're raising to the particular exponent is negative

The  area of the lateral face of cylinder = 150.79 ft²

The  area of the two bases of the cylinder = 56.55 ft²

The total surface area of the cylinder =  207.34  ft²

We know that the formula for the surface area of cylinder is:

A = 2πrh + 2πr²

where r is the radius of the cylinder

and h is the height of the cylinder

Here, r = 3 ft and h = 8 ft

The area of the lateral face of cylinder would be,

A₁ = 2 × π × r × h

A₁ = 2 × π × 3 × 8

A₁ = 48 × π

A₁ = 150.79 sq. ft.

And the area of two bases is,

A₂ = 2πr²

A₂ = 2 × π × 3²

A₂ = 18 × π

A₂ = 56.55 sq. ft.

The total surface area of cylinder would be,

A = A₁ + A₂

A = 150.79 + 56.55

A = 207.34 sq. ft.

Therefore, the required surface area of cylinder = 207.34 ft²

Learn more about the area of cylinder here:

https://brainly.com/question/22074027

#SPJ1

The required value of x in the given equation is -0.00047.

Let's first simplify the expression inside the parentheses:

-33x+1 = 1-33x

Now, we can substitute this back into the original equation and use order of operations (PEMDAS) to simplify:

4.76 - (23 x 51)-1(-33x+1) = 4.76 - (23/51)(1-33x)

= 4.76 - (23/51) + (23/17)x

Now, we want to solve for x. We'll start by isolating the term with x on one side of the equation:

(23/17)x = 4.76 - (23/51)

x =-0.00047

Therefore, the value of x in the given equation is -0.00047.

Learn more about equations here:

brainly.com/question/11536910

#SPJ1

The stereo system installer needs 170 ft of speaker wire.

In this case, the two diagonals of the rectangular room are the longest sides of two right triangles. The length of one diagonal can be found by:

d1 = √(40² + 75²)

d1 = √(1600 + 5625)

d1 = √7225

d1 = 85 ft

Similarly, the length of the other diagonal is also 85 ft.

Total speaker wire = 2 × 85 ft = 170 ft

So, the stereo system installer needs 170 ft of speaker wire.

Learn more about word problem on

https://brainly.com/question/21405634

#SPJ1

An expression that represents the length of one side of the square is √(12x/35).

In Mathematics and Geometry, the area of a square can be calculated by using this mathematical equation (formula);

A = x²

Where:

By substituting the given parameters into the formula for the area of a square, we have the following;

-12x + 36x² = x²

36x² - x² = 12x

35x² = 12x

x = √(12x/35)

Read more on expression and square here: https://brainly.com/question/16506342

#SPJ1