The new computer will take to loading a document with 2 graphics and 1 paragraph is 43.99 seconds.
How to calculate time taken using percentage?Time taken can be calculated using percentages by determining the percentage of time that has already passed, then calculating the remaining time based on the percentage of time remaining.
For example, if you are asked to calculate the time taken for a project that is 50% complete, you would first need to determine the total length of the project. Let's say it is a project with a timeline of two months.
Next, you would need to calculate the percentage of time that has already passed. In this case, since the project is 50% complete, 50% of the two months has already passed. This means that one month has passed.
Finally, you can determine the time taken by subtracting the time that has already passed from the total length of the project. In this case, the time taken would be one month, since one month has already passed and there is one month remaining until the project is completed.
The old computer would load 2 graphs and one paragraph in:
22 × 2 seconds + 9 seconds = 53 seconds
The new computer is 17% faster so:
53 - (17% × 53) = 43.99 seconds
To learn more about time taken problems, visit
brainly.com/question/29438900
#SPJ1
CURRENT OBJECTIVE
Using proportions to compare
Question
Georgia has 401 golf courses with a population of 10, 736, 059 while New Hampshire has 113
golf courses with a population of 1, 371, 246. If New Hampshire was proportional to Georgia in
golf courses to population, how many golf courses would New Hampshire have? Round to the
nearest whole number.
Provide your answer below:
golf courses
And why when I scan it gives me everything but what I ask for
With constant of proportionality= 0.45 the New Hamsphire would have 51 golf courses.
What is a constant of proportionality?
The constant of proportionality is the constant value of the ratio between two proportional quantities. Two varying quantities are said to be in a relation of proportionality when, either their ratio or their product yields a constant. The value of the constant of proportionality depends on the type of proportion between the two given quantities: Direct Variation and Inverse Variation.
Direct Variation: The equation for direct proportionality is y = kx, which shows as x increases, y also increases at the same rate. Example: The cost per item(y) is directly proportional to the number of items(x) purchased, expressed as y ∝ x
Inverse Variation: The equation for the indirect proportionality is y = k/x, which shows that as y increases, x decreases and vice-versa. Example: The speed of a moving vehicle (y) inversely varies as the time taken (x) to cover a certain distance, expressed as y ∝ 1/x
In both cases, k is constant. The value of this constant is called the coefficient of proportionality. The constant of proportionality is also known as the unit rate.
Now,
As given Georgia has 401 golf courses with a population of 10, 736, 059 while New Hampshire has 113 golf courses with a population of 1, 371, 246.
So Georgia have 1 golf course for 26773 people and New hamsphore have 1 golf course for 12135 people.
that means they have constant of proportionality= 0.45 with respect to population/golf course ratio .
population/golf course ratio for georgia=26773
population/golf course ratio for new hamsphire=12135
and For new hamsphire to have same ratio for population/golf ratio as georgia it will need 113*0.45=51 golf courses
To know more about constant of proportionality visit the link
https://brainly.com/question/29126727?referrer=searchResults
#SPJ1
Robin paid a $120 a month on a credit card. She was late on a payment so her monthly bill was raised to $150 a month. which of these shows how Robin can calculate the percent increase she was charged
Answer: One way to calculate the percent increase in Robin's monthly bill is to use the following formula:
% increase = (new amount - original amount) / original amount x 100
In this case, the original amount is $120 and the new amount is $150. So, the calculation would be:
% increase = (150 - 120) / 120 x 100 = 30 / 120 x 100 = 0.25 x 100 = 25
Therefore, the percent increase in Robin's monthly bill is 25%.
Another way to calculate the percent increase is to use the formula:
(New amount - original amount) / original amount
In this case: (150-120)/120 = 0.25, and multiply by 100 to get 25%
So, both formula gives the same answer 25%
Step-by-step explanation:
A bird of species A, when diving, can travel 6 times as fast as a bird of species B top speed. If the total speeds for these two birds is 238 miles per hour, find the fastest speed of the bird of species A and the fastest speed of the bird of species B.
Answer: Bird A's top speed is 1428 MPH.
Step-by-step explanation: 238x6 = 1428
rewrite the (numerical) matrix equation below in symbolic form as a vector equation, using symbols subscript[v, 1], subscript[v, 2], \[ellipsis] for the vectors and subscript[c, 1], subscript[c, 2], \[ellipsis] for scalars. define what each symbol represents, using the data given in the matrix equation.
Given matrix equation as a vector equation:
[tex]\begin{bmatrix}c_1 & c_2 & c_3 & c_4 & c_5\\d_1 & d_2 & d_3 & d_5 & d_5\end{bmatrix}~\begin{bmatrix}v_1\\ v_2\\v_3\\ v_4\\v_5\end{bmatrix}=\begin{bmatrix}8\\-1\end{bmatrix}[/tex]
We know tha a matrix equation is nothing but the equation of the form Av = b,
where A is m × n matrix, ( It is called the coefficient matrix),
v is n × 1 column vector,
and b is m × 1 column vector.
A matrix equation is also called a matrix–vector equation.
Consider given matrix equation.
[tex]\begin{bmatrix}-3 & 5 & -4 & 9 & 7\\5 & 8 & 1 & -2 & -4\end{bmatrix}~\begin{bmatrix}-3\\ 2\\4\\ -1\\2\end{bmatrix}=\begin{bmatrix}8\\-1\end{bmatrix}[/tex]
We need to write the this matrix equation as a vector equation, using symbols v₁, v₂, v₃, . . . for vectors and c₁, c₂ and c₃, . . . for scalars.
We can observe that the first matrix is 2 × 5 matrix and the solution matrix is also 2 × 1
So, it can be rewritten as c₁, c₂, c₃, c₄ and c₅ for the first row and for the second row of matrix d₁, d₂, d₃, d₄ and d₅
Then we multiply those rows with vector v₁, v₂, v₃, v₄ and v₅ we'll get the resultant matrix.
So, we get a vector equation as:
[tex]\begin{bmatrix}c_1 & c_2 & c_3 & c_4 & c_5\\d_1 & d_2 & d_3 & d_5 & d_5\end{bmatrix}~\begin{bmatrix}v_1\\ v_2\\v_3\\ v_4\\v_5\end{bmatrix}=\begin{bmatrix}8\\-1\end{bmatrix}[/tex]
Learn more about the vector equation here:
https://brainly.com/question/29132693
#SPJ4
Find the complete question below.
a number n is said to be squarefree is the largest square that divides n is 1. show that any square-free integer can be uniquely written as the product of a squarefree integer and a square
Any square-free integer can be expressed as the product of a square-free integer (which has no square factors) and a perfect square (which has only square factors). This product is unique for any given square-free integer.
Any square-free integer can be expressed as the product of a square-free integer and a perfect square. This is because a square-free integer has no square factors, so the product of a square-free integer and a perfect square would have only square factors, and thus be square-free. To show that this product is unique for any given square-free integer, we can use the fact that any integer can be expressed as the product of its prime factors and that a square-free integer has no square factors. This means the prime factors of the square-free integer are all distinct, and thus the product of the square-free integer and the perfect square can be expressed as the product of the prime factors of the square-free integer and the prime factors of the perfect square. Since the prime factors of the perfect square are all the same, the product is uniquely determined by the prime factors of the square-free integer. Thus, the product of a square-free integer and a perfect square is unique for any given square-free integer.
Learn more about square here
https://brainly.com/question/14198272
#SPJ4
The height in feet of a firework t seconds after it is launched is modeled by h(t) --16r2 + 105t + 10. Find its average speed from l to 3 seconds.
The change in height divided by the change in time yields the firework's average speed from t=1 to t=3 seconds.
Average change speed is equal to (h(3) – h(1)) (3 - 1)
h(3) = 16*32 + 105*3 + 10 = 536
h(1) = 16*12 + 105*1 + 10 = 126
Average speed = (536 - 126)/(3 - 1) = 410/2 = 205 ft/sec
h(t) = 16r2 + 105t + 10 models the height of a firework t seconds after it is released. We must determine the change in height divided by the change in time in order to get its average speed between t=1 and t=3 seconds.
By entering t = 3 into h(t), we can determine the height at 3 seconds, which gives us h(3) = 16*32 + 105*3 + 10 = 536. We can figure out the height.
Learn more about average here
https://brainly.com/question/24057012
#SPJ4
which model can be used to find 4/5 1/10
Which of the following are properties of a kite? Choose ALL that apply.
Diagonals are perpendicular
Two pairs of consecutive sides are congruent
1 diagonal bisects the other
Opposite angles are congruent
Answer:
Diagonals are perpendicular
1 diagonal bisects the other
Opposite angles are congruent
To friends shop for fresh fruit. Jaxson buys a watermelon for $8.25 and 3 pounds of cherries. Tim buys a pineapple for $3.15 and 2 pounds of cherries. Use the variable P to represent the price in dollars per pound of cherries. write and simplify an expression to represent how much more Jaxson spent.
If two friends shop for fresh fruit. Jaxson buys a watermelon for $8.25 and 3 pounds of cherries. The expression to represent how much more Jaxson spent is :5.1 +p.
How to find the expression?P = price of the cherries per pound
Price of cherries bought by Jaxson= $3p
Total amount spent by Jaxson = $8.25 + $ 3p
Price of cherries bought by Tim = $2p
Total amount spent by Tim = $3.15 + $ 2p
Now let find how much more Jaxson spent.
8.25 + 3p - 3.15 + 2p
5.1 + 3p - 2p
Combine like terms
5.1 +1p
Multiply by 1
5.1 + p
Therefore the expression to represent how much more Jaxson spent is :5.1 +p.
Learn more about expression here:https://brainly.com/question/3255078
#SPJ1
A fashion store is planning its end–of–season sale. It sells 40 of its signature jeans every week at $175 per pair. Last year, the store's sales increased to 60 pairs per week when the price was dropped by $25. By what amount should the store discount the price this year to maximize its revenue?
A. $112.50
B. $103.50
C. $62.50
D. $71.50
Answer:
A
Step-by-step explanation:
Every $1 decrease in price corresponds to a 0.8 increase in the number of pairs of jeans sold.
So, if [tex]x[/tex] pairs of jeans are sold, the revenue in dollars is [tex](175-x)(40+0.8x)[/tex].
The roots of this function are [tex]x=175[/tex] and [tex]x=-50[/tex]. The maximum is achieved halfway between these roots at [tex]x=62.5[/tex].
When 62.5 pairs of jeans are sold, the price is $112.50.
Based on the information, the store should discount $112.50 from the price to maximize its revenue.
How to calculate the amount of discount that the store should make?To calculate the amount of discount that the store must make to maximize its profits we must perform the following mathematical operation:
First we have to analyze the available data which are:
40 exclusive jeans/week ($175 each)60 exclusive jeans/week ($150 each)According to the above information, the problem could be answered with the following mathematical formula:
(175 - x)(40 + 0.8x)
x = 175
x = -50
x = 62.50.
According to the above, the correct answer is $112.50 (option A).
Learn more about discounts in: https://brainly.com/question/3541148
#SPJ1
Suppose P dollars is invested with an annual interest rate of 3.5% compounded semiannually. Use the laws of exponents to find the equivalent annual rate.
Answer:
3.53%
Step-by-step explanation:
annual 3.5%
So half a year =1.75% and compound twice a year.
equivalent annual rate is (1+1.75%)^2 -1 =.0353 =3.53%
Solve for x.
12
10
X
5
will give brainliest!!
Answer:
x=60
Step-by-step explanation:
Two trains leave towns 476 kilometers apart at the same time and travel toward each other. One train travels 22 km/h faster than the other. If they meet in 2 hours, what is the rate of each train?
Answer:
Train 1: 130 km/h
Train 2: 108 km/h
Step-by-step explanation:
Let train 1 be the faster train.
Train 1:
distance = d
speed = s
time = 2 hours
Train 2:
distance = 476 - d
speed = s - 22
time = 2 hours
speed = distance/time
distance = speed × time
Train 1:
d = 2s
Train 2:
476 - d = 2(s - 22)
d = 2s
476 - d = 2s - 44
d = 2s
476 - 2s = 2s - 44
520 = 4s
s = 130
s - 22 = 108
Train 1: 130 km/h
Train 2: 108 km/h
in the graph below, what best describes the average acceleration from 40 to 70 s?
The typical increase in speed from 40 to 70 seconds The magnitude is lower than the initial acceleration and is positive.
How do you describe average acceleration?The velocity change's average acceleration is referred to as this. To calculate any object's average acceleration, we divide the change in velocity by the amount of time that has passed. As a result, it is clear that the average acceleration is defined as the ratio of the change in velocity to the change in time over a certain interval.
The average acceleration is the velocity change divided by the time that has passed. A marble's average acceleration is 20 cm/s, for instance, if its velocity increases from 0 to 60 cm/s in three seconds. The marble's speed will increase by 20 cm/s every second as a result. The ball will therefore have an upwards-moving terminal velocity of 20 m/s after two seconds.
To learn more about average acceleration refer to :
https://brainly.com/question/26246639
#SPJ1
Word Needed! *
The Bellah's pool is leaking. The pool leaked 3/4
gallon in 20 minutes, or 1/3hour. How many
gallons is the pool leaking each hour?
Identify the slope and y intercept of each graph. Drag the 3 points to the correct places on the graph drag and adjust the line so it goes through the points on the line
Y = 2x - 5
M =
B =
Answer:
slope: 2 , y-int: (0, -5)
Step-by-step explanation:
Suppose a company has fixed costs of $40,800 and variable cost per unit of 1/3 x + 222 dollars, where x is the total number of units produced. Suppose further that the selling price of its product is 1946 − 2/3 x dollars per unit.
The break-even points at which the sum of the fixed and variable costs (40,800 + (1/3)·x + 222) is equivalent to the revenue (1946·x - (2/3)·x²) are; x = 21, 2897
What is a break-even point?The break-even point in cost accounting is the point where the total cost of production is equivalent to the total revenue from the sale of the products.
The fixed cost of the company = $40,800
The variable cost = (1/3)·x + 222 Dollars
x = The total number of units sold
The selling price of the product = 1946 - (2/3)·x Dollars
A possible question, obtained from a similar question is the value of the number of units sold at break even point
The break even point where the cost and revenue are equivalent, can be found as follows;
Revenue = Selling price × Number of units sold, therefore;
Revenue = (1946 - (2/3)·x) × x = 1946·x - (2/3)·x²
At the break even point, we get;
Sum total of the cost = Revenue
Therefore;
Fixed cost + Variable cost = Revenue
40,800 + (1/3)·x + 222 = 1946·x - (2/3)·x²
1946·x - (2/3)·x² - (40,800 + (1/3)·x + 222) = 0
(-2·x² + 5837·x - 123066)/3 = 0
x = (-5837 ± √(5837² - 4×(-2)×(-123066)))/(2×(-2))
x = (-5837 ± √(33086041))/(-4)
x ≈ 21 or x ≈ 2897
The number of units produced at the break even point are; x = 21 units and 2897 unitsLearn more about cost analysis here: https://brainly.com/question/17236115
#SPJ1
The jazz band has b members. To raise money for a tour,each member sold 12 raffle tickets. Write an expression that shows the number of the raffle tickets sold answer
Answer:
m=12b
Step-by-step explanation:
m (money raised) is equal to 12b, or 12 tickets per b (b = people)
[tex]\frac{csc x -1}{cot x} = \frac{cot x}{csc x + 1}[/tex]
Answer:
The equation [tex]\frac{csc x -1}{cot x} = \frac{cot x}{csc x + 1}[/tex] can be simplified by cross-multiplying the fractions and then solving for x. This will result in the equation [tex]csc^2 x - 1 = 0[/tex], which can be simplified to [tex]csc x = 1[/tex], and thus [tex]x = \frac{\pi}{2} + n\pi[/tex], where n is any integer.
give me brainiest
Find an equation of the sphere with center (2,-6,4) and radius 5.
Describe its intersection with each of the coordinate planes.
The equation of a sphere with center (a, b, c) and radius r is given by:
[tex](x - a)^2 + (y - b)^2 + (z - c)^2 = r^2[/tex]
Given the center (2,-6,4) and radius 5, we can substitute these values into the equation to find the equation of the sphere:
[tex](x - 2)^2 + (y + 6)^2 + (z - 4)^2 = 5^2[/tex]
So, the equation of the sphere is:
[tex](x-2)^2 + (y+6)^2 + (z-4)^2 = 25[/tex]
The sphere will intersect each of the coordinate planes in circles.
Intersection with the XY-plane:
The sphere intersects the XY-plane when z = 4.
Then, the equation of the circle on the XY-plane is [tex](x-2)^2 + (y+6)^2 = 5^2[/tex]
Intersection with the XZ-plane:
The sphere intersects the XZ-plane when y = -6.
Then, the equation of the circle on the XZ-plane is [tex](x-2)^2 + (z-4)^2 = 5^2[/tex]
Intersection with the YZ-plane:
The sphere intersects the YZ-plane when x = 2.
Then, the equation of the circle on the YZ-plane is [tex](y+6)^2 + (z-4)^2 = 5^2[/tex]
The sphere with center (2,-6,4) and radius 5 intersects each of the coordinate planes at circles.
These circles are defined by the equations [tex](x-2)^2 + (y+6)^2 = 25[/tex] on the XY-plane, [tex](x-2)^2 + (z-4)^2 = 25[/tex] on the XZ-plane, and [tex](y+6)^2 + (z-4)^2 = 25[/tex] on the YZ-plane.
To learn more about coordinate planes:
https://brainly.com/question/13854649
#SPJ4
Consider the following sample data.
14 9 19 18 5
8
Calculate the z-score for the following values.
a. 12
b. 6
c. 15
d. 13
a. The z-score for 12 is.
(Round to two decimal places as needed.)
The z-score for the given values is - 0280, -1.08, 0.49, 0.147 respectively.
What do z-scores mean?The z-score of a data point defines this precise distance in terms of standard deviations above or below the mean.
This formula is used to determine a z-score:
mean standard deviation for each data point
Means of the data points with a standard deviation of z
Below is the same equation in symbol form:
z= x−μ / σ
Here are some noteworthy z-score details:
When the z-score is high, the data point is.
A negative z-score indicates that a data point is below average.
If the z-score is close to 0.00, the data point is thought to be around average.
For the given data set,
14 9 19 18 5 8
Mean of the data =sum of observations / no. of observations = 73/6 = 12.16
Mean of the data is 12.16
Standard deviation = √∑(x - μ)² / n-1
= 5.70
a) The z- score of 12 is
z= x−μ / σ
z = 12 - 12.16 / 5.70
z = - 0280
b) x = 6,
z = 6 - 12.16/5.70
z = -1.08
c) x = 15
z = 15 - 12.16/5.70
z = 0.49
d) x = 13
z = 13 - 12.16 / 5.70
z = 0.147
To Learn more About z-scores Refer To:
brainly.com/question/25638875
#SPJ1
the pressure gauge on a cylinder of gas registers the gauge pressure, which is the difference between the interior pressure and the exterior pressure p0. let's call the gauge pressure pg. when the cylinder is full, the mass of the gas in it is mi at a gauge pressure of pgi. assuming the temperature of the cylinder remains constant, show that the mass of the gas remaining in the cylinder when the pressure reading is pgf is given by mf
The gauge pressure, or the difference between the inner pressure and the external pressure p0, is what the pressure gauge on a gas cylinder measures. Give the gauge pressure the letter pg.
The gas in the cylinder weighs mi at pgi gauge pressure when it is full. We can apply the ideal gas formula, PV = nRT, where P is pressure, V is volume, n is the number of moles, R is the ideal gas constant, and T is temperature, assuming the cylinder's temperature stays constant.
We can assume that the product nRT is constant because the temperature is constant. Consequently, we can write:
(pgf + p0) = (pgi + p0)(Vi) (Vf)
where Vi is the cylinder's initial volume and Vf is the cylinder's final volume when the pressure is pgf.
We also know that the gas's mass, m, is determined by multiplying the number of moles, n, by the molar mass, M, or m = nM.
The ideal gas law can be used to express the number of moles in terms of volume and pressure:
m/M = P(V/RT) = n
Thus, mf = pgf(Vf/RT).
M equals (pgf + p0)(Vf/RT).
(Vi/RT) Mi (pgi + p0)
where mf is the mass of gas still present in the cylinder at pgf pressure.
To learn more about the ideal gas equation, refer to the link:brainly.com/question/28837405
#SPJ4
A family has two cars. The first car has a fuel efficiency of 15 miles per gallon of gas and the second has a fuel efficiency of 30 miles per gallon of gas. During one particular week, the two cars went a combined total of 975 miles, for a total gas consumption of 45 gallons. How many gallons were consumed by each of the two cars that week?
Answer: We can start by using algebra to represent the information given in the problem. Let x be the number of gallons consumed by the first car and y be the number of gallons consumed by the second car.
We know that:
x + y = 45 (the total number of gallons consumed by both cars)
15x + 30y = 975 (the total number of miles driven by both cars, given the fuel efficiency of each car)
We have two equations and two unknowns, so we can use these equations to solve for the value of x and y.
From the first equation, we can solve for x:
x = 45 - y
We can substitute this expression of x into the second equation:
15(45 - y) + 30y = 975
Simplifying the left side of the equation:
675 - 15y + 30y = 975
Subtracting 675 from both sides:
15y = 300
And finally divide both sides by 15:
y = 20
So the second car consumed 20 gallons of gas that week.
We can substitute this value of y back into the equation x = 45 - y to find the value of x
x = 45 - 20 = 25
So the first car consumed 25 gallons of gas that week.
Step-by-step explanation:
Enter the equation for the graph y=[?] cos([?]x)
The equation for the graph will be
[tex]y=1 cos(3x)[/tex]
Define the function y = cos(2x + π/4) ?The function y = cos(2x + π/4) is a cosine function where the independent variable x is multiplied by 2 and then has π/4 added to it before the cosine is applied. The amplitude of this function is 1 and the period is π.
In this question
[tex]we assume, \\y=acos(bx)\\\\when x=0y=1\\\\y=acos(bx)\\\\1=acos0\\\\a=1\\so y=cos(bx)\\\\when x=\pi/3 y=-1\\y=cos(b.\pi/3)\\-1=cos1b.pi/3=cos(pi)\\b=3[/tex]
[tex]y=acosbx[/tex]
[tex]so, y=1.cos(3x)[/tex]
To know more about the cosine function visit:
https://brainly.com/question/17954123
#SPJ1
I only need questions 7,8,9,10 answered pls
The measure of ∠2 is [tex]54^{0}[/tex], ∠3 is [tex]23^{0}[/tex], ∠6 is [tex]121^{0}[/tex].
Answers to 7, 8, 9, 10:7.- The sum of the internal angles in a triangle equals 180°.
2x + 22 + 4x + 11 + [180- (9x - 15)] = 180
6x + 180 - 9x + 15 = 180 - 33
-2x = 147 - 180 - 15
-2x = -48
x = -48/-3
x = 16
∠X = 2(16) + 22
∠X = 54°
8. 8x - 31 + 6x - 8 + [180 - (10x + 17)] = 180
14x - 39 + 180 - 10x - 17 = 180
4x = 56
x = 56 / 4
x = 14
∠ ECD = 180 - 10(14) - 17
∠ECD = 180 - 140 - 17
∠ECD = 23°
9.- In ΔABC
m ∠C = m ∠A - 9
m ∠B = 4m∠A - 15
The sum of the internal angles in a triangle equals 180°.
∠A + ∠B + ∠C = 180°
∠A + 4∠A - 15 + ∠A - 9 = 180
6∠A = 180 + 24
6∠A = 204
∠A = 204 / 6 = 34
Then, ∠B = 4∠A - 15
∠B = 4(34) - 15
∠B = 121
10.- ∠XYZ = 2∠X - 9
m ∠W = 38°
38 + ∠X + [180 - (2∠X - 9)] = 180
38 + ∠X + 180 - 2∠X + 9 = 180
-1∠X = -47⇒∠X = -47/-1
∠X = 47
Then, ∠XYZ = 2(47) - 9
∠XYZ = 85°
Therefore, the measure of ∠2 is [tex]54^{0}[/tex], ∠3 is [tex]23^{0}[/tex], ∠6 is [tex]121^{0}[/tex] and ∠XYZ is [tex]85^{0}[/tex].
To learn more about sum of the internal angles refers to;
brainly.com/question/13743234
#SPJ1
Rewrite 8.24 x 10 6 in standard form
A 824,000
B 8,240,000
C 8,240,000,000
D 82,400,000
Answer:
answer is B) 8 240 000
(: have a nice day
Answer:
B 8,240,000
Step-by-step explanation:
your welcome
What is the linear velocity in miles per hour for a particle moving in a circular path at 200 revolutions per minute on a circle of radius 60 feet?
Answer: 1,200. None of the above.
Step-by-step explanation:
200 revolutions per minute times 60 feet. 1,200
Which quadrilaterals have diagonal that bisect their angles?
Rhombus and Square are the quadrilaterals where diagonals are equal and bisect each other at 90°.
What is quadrilateral?A quadrilateral is a four-sided closed shape, where sum of the interior angles equals 180°.
Here,
For the quadrilateral there are only two quadrilaterals where diagonals bisect each other at 90° and will be of equal length of measure are square and rhombus.
Thus, Rhombus and Square are the quadrilaterals where diagonals are equal and bisect each other at 90°.
Learn more about quadrilateral here: https://brainly.com/question/13805601
#SPJ1
Which ordered pair is a solution to the linear system?
2x + y = 5
x – y = 13
Oil is spilled onto a kitchen floor. The area covered by the oil at time t is given by the function A, where A(t) is measured in square centimeters and tis measured in seconds. Which of the following gives the rate at which the area covered by the oil is changing at time t=10? A A(10) B A(11) – A(9) с A(10) 10 A' (10)
The rate at which the area covered by the oil is changing at time t = 10 is A'(10).
Oil is spilled onto a kitchen floor. The function A, where A(t) is measured in square centimeters and t is measured in seconds, gives the area covered by the oil at time t.
Given that the region that was covered in oil at time t = A(t)
We must differentiate A(t) with respect to time t in order to calculate the rate of change in the area covered by the oil over time.
By differentiation:
[tex]\frac{dA}{dt}=A'(t)[/tex]
The rate at which the oily area is transforming is t = 10
[tex]\frac{dA}{dt}|_{t=10}=A'(t)|_{t=10}[/tex]
[tex]\frac{dA}{dt}=A'(10)[/tex]
Hence, the rate at which the area covered by the oil is changing at time t = 10 is A'(10).
To learn more about rate here:
https://brainly.com/question/23634231
#SPJ4