a contractor estimates he will need 19 sheets of drywall and 85 square feet of tile to remodel a bathroom. he actually needs 16 sheets of drywall and 67 feet of tile. to the nearest percent, what is the difference in the percent errors of the estimates?

The map that shows the picnic table in the correct location is illustrated below.

Firstly, we need to understand the concept of scale on a map. Maps are often drawn to scale, which means that the distances between different points on the map represent a proportional distance in real life. For instance, if one inch on the map equals one mile in real life, then two inches on the map would represent two miles in real life.

To do this, we need to locate the campsite on the map and measure out 1.5 miles along Path A. Once we have done this, we can mark this location on the map as the location of the picnic table.

However, we need to make sure that we are using a map that is drawn to scale. Otherwise, we might not be able to accurately measure the distance and locate the picnic table correctly.

Therefore, we need to examine the different maps that we have and find one that is drawn to scale. Once we have found a suitable map, we can measure out the distance from the campsite to the location of the table along Path A, and mark it on the map.

Finally, we can compare the location we have marked on the map with the location of the table as described in the problem. If they match up, we have found the correct location of the table on the map.

To know more about table here

https://brainly.com/question/17084863

#SPJ1

False. The circumference of a circle is given by using the system 2πr, wherein r is the radius of the circle and π( pi) is a accurate constant about equal to 3.14.

If the radius of the circle is 8 cm, then the precise circumference is:

C = 2πr = 2 × 3.14 × 8 ≈ 50.24 cm

Consequently, the given estimate of 24 cm is extensively decrease than the real value of the circumference. a good estimate for the circumference of a circle with a radius of 8 cm would be closer to 50 cm than 24 cm.

It's crucial to be aware that the accuracy of any estimate depends at the approach used to generate it. If the estimate changed into primarily based on an incorrect assumption or an inaccurate measurement, then it can be extensively different from the real value.

Learn more about  circumference of a circle:-

https://brainly.com/question/18571680

#SPJ4

That we are 95% confident that the true population mean falls between 4.68 and 5.96. Based on this interval, it is likely that the true population mean is greater than 4.

a. The null hypothesis is that the average score on the Attributional Complexity scale is equal to or less than 4. The alternative hypothesis is that the average score is greater than 4. Symbolically:

H0: µ ≤ 4

Ha: µ > 4

b. We need to conduct a one-sample t-test, since we are comparing a sample mean to a known population mean (4). We will use a significance level of α = 0.05.

c. Using the information given, we can calculate the t-value as:

t = (x - µ) / (s / √n) = (5.32 - 4) / (0.54 / √10) = 5.04

where x is the sample mean, µ is the population mean, s is the sample standard deviation, and n is the sample size. The degrees of freedom (df) is n - 1 = 9.

At a significance level of α = 0.05 and with 9 degrees of freedom, the critical t-value is 1.833 (obtained from a t-table or calculator). Since our calculated t-value (5.04) is greater than the critical t-value (1.833), we can reject the null hypothesis.

Based on these sample data, we can say that there is evidence to suggest that the average score on the Attributional Complexity scale is greater than 4.

The p-value associated with the sample mean is less than 0.001. This means that there is less than a 0.1% chance of obtaining a sample mean of 5.32 (or higher) if the null hypothesis is true.

If the null hypothesis is true, we would expect the sample mean to be around 4. Therefore, the large difference between the sample mean (5.32) and the null hypothesis value (4) suggests that the null hypothesis is not true.

d. The 95% confidence interval can be calculated as:

CI =x ± t*(s / √n) = 5.32 ± 2.306*(0.54 / √10) = (4.68, 5.96)

This means that we are 95% confident that the true population mean falls between 4.68 and 5.96. Based on this interval, it is likely that the true population mean is greater than 4.

To learn more about  population visit:

https://brainly.com/question/24786731

#SPJ11

The researchers conclusion that there were no significant genotype differences across the three age groups is correct.

To determine whether the researchers' conclusion is correct, we can perform a chi-square test of independence.

The null hypothesis for this test is that the genotype distribution is same across all three age groups, while the alternative hypothesis is that genotype distribution differs across at least one age group.

The results of this analysis is:

Genotype Age Group Observed Expected (O - E)² / E

E4*/E4* 20-24 674 676.15 0.051

40-44 712 709.30 0.039

60-64 719 719.55 0.001

E4*/E4" 20-24 836 833.35 0.011

40-44 821 823.41 0.007

60-64 835 833.24 0.006

Upper E4/E4" 20-24 586 586.50 0.000

40-44 647 646.28 0.001

60-64 726 726.21 0.000

The chi-square test statistic for this analysis is 0.107 with 4 degrees of freedom. Using a significance level of 0.05, the critical value for this test is 9.488.

Since the calculated test statistic (0.107) is less than the critical value (9.488), we fail to reject the null hypothesis and conclude that there is not enough evidence to suggest that the genotype distribution differs across at least one age group.

Therefore, the researchers' conclusion that "there were no significant genotype differences across the three age groups" is correct based on the given data and analysis.

Know more about genotype here:

https://brainly.com/question/30460326

#SPJ11

The mean of all six sample means is equal to the population mean (18,750), the sample mean is an unbiased estimator of the population mean.

First, let's calculate the mean for each of the given samples:

1. R, B: (15,000 + 18,000) / 2 = 16,500 (already given)

2. R, G: (15,000 + 22,000) / 2 = 18,500 (already given)

3. R, W: (15,000 + 20,000) / 2 = 17,500 (already given)

4. B, G: (18,000 + 22,000) / 2 = 20,000 (already given)

5. B, W: (18,000 + 20,000) / 2 = 19,000 (already given)

6. G, W: (22,000 + 20,000) / 2 = 21,000 (already given)

Now, let's calculate the mean of all six sample means:

(16,500 + 18,500 + 17,500 + 20,000 + 19,000 + 21,000) / 6 = 112,500 / 6 = 18,750

The mean of all six sample means is 18,750.

Next, let's calculate the population mean:

(15,000 + 18,000 + 22,000 + 20,000) / 4 = 75,000 / 4 = 18,750

The population mean is 18,750.

Since the mean of all six sample means is equal to the population mean (18,750), the sample mean is an unbiased estimator of the population mean.

To learn more on mean click:

brainly.com/question/8192279

#SPJ1

If the arrow lands on yellow you win $75, blue gives $25, green gives $10, and red gives $1. The expected value of the game is $27.75, written as a decimal rounded to two places.

To find the expected value of the game, we need to multiply the value of each piece by the probability of landing on that piece, and then add up all the products.

First, let's determine the probability of landing on each colored piece of the wheel. Since each piece is equally likely, we can find the probability by dividing 1 by the number of pieces.
There are 4 colors on the wheel (yellow, blue, green, and red), so the probability of landing on any color is 1/4 or 0.25.
Now, let's calculate the expected value of the game:

Expected Value = (Probability of Yellow) × (Value of Yellow) + (Probability of Blue) × (Value of Blue) + (Probability of Green) × (Value of Green) + (Probability of Red) × (Value of Red)

The probability of landing on yellow is 1/4, so the value of yellow is $75.

The probability of landing on blue is also 1/4, so the value of blue is $25.

The probability of landing on the green is 1/4, so the value of green is $10.

The probability of landing on red is also 1/4, so the value of red is $1.

Now we can calculate the expected value:

Expected value = (1/4) x $75 + (1/4) x $25 + (1/4) x $10 + (1/4) x $1
Expected value = $18.75 + $6.25 + $2.50 + $0.25
Expected value = $27.75

So the expected value of the game is $27.75. Written as a decimal rounded to two places, the answer is $27.75.

Learn more about expected value:

brainly.com/question/29093746

#SPJ11

The effective rate corresponding to the given nominal rate of 8%/year compounded semiannually is 8.16%.

Converting the nominal rate to decimal form
Nominal rate = 8% = 0.08

Dividing the nominal rate by the number of compounding periods per year
Since the nominal rate is compounded semiannually, there are 2 compounding periods per year.

Therefore, we will divide the nominal rate by 2.
0.08 / 2 = 0.04

Calculating the effective rate using the formula:

Effective rate

[tex]= (1 + (Nominal rate / Compounding periods per year))^{Compounding periods per year }- 1[/tex]
= (1 + 0.04)² - 1
= (1.04)² - 1
= 1.0816 - 1
= 0.0816

Step 4: Convert the effective rate to percentage form
Effective rate = 0.0816 * 100 = 8.16%

To learn more about the  nominal rate: https://brainly.com/question/26228750

#SPJ11

Demand refers to the quantity of a product or service that buyers are willing and able to purchase at a certain price level. A demand curve is a graphical representation of the relationship between the quantity of a good or service that buyers are willing to purchase at different price levels.

In the market for VCRs, the demand and supply equations are Qd = 1,000 - 6P and Qs = 4P respectively. The government decides to impose a tax of $30 per unit sold on VCRs. This will lead to a shift in the supply curve upwards by $30, resulting in a new equilibrium point.

1. To find the new equilibrium quantity with the tax, we set Qd = Qs + tax. Thus, 1,000 - 6P = 4P + 30. Solving for P, we get P = $105. The equilibrium quantity is therefore Q = 1,000 - 6($105) = 370.

2. The price paid by buyers is the same as the equilibrium price, which is $105.

3. The price paid by sellers is the equilibrium price minus the tax, which is $75.

4. The diagram below illustrates the impact of the tax on the market for VCRs. The original equilibrium point is E0, with a price of $70 and a quantity of 400. With the tax, the new equilibrium point is E1, with a higher price of $105 and a lower quantity of 370. The tax creates a vertical distance between the two equilibrium points, which represents the tax revenue collected by the government.

[Insert Diagram Here]

5. The deadweight loss due to the tax is the reduction in total surplus (consumer surplus + producer surplus) that results from the tax. Using the original equilibrium as a benchmark, the total surplus is (1/2)($70)(400) = $14,000. With the tax, the total surplus is (1/2)($75)(340) = $6,375. Thus, the deadweight loss is $7,625.

6. To calculate the consumer surplus due to the tax, we need to compare the original consumer surplus with the new consumer surplus. Using the original equilibrium as a benchmark, the consumer surplus is (1/2)($70)(400 - 70) = $5,950. With the tax, the consumer surplus is (1/2)($105)(370 - 105) = $12,145. Thus, the consumer surplus due to the tax is $6,195.

More on demand curve : https://brainly.com/question/1139186

#SPJ11

Based on the given information in the matrix, you should compare the profits of each firm in the different scenarios to identify their dominant strategies. The correct option would be the one that matches the conditions mentioned above for each firm's dominant strategy.

To determine the dominant strategy for each firm, we will analyze the payoff matrix and compare the profits for each firm under different scenarios. A dominant strategy is one that provides a higher payoff for a firm, no matter what the other firm chooses to do.

Payoff Matrix:
(A1, B1): Alpha raises price, Beta raises price
(A2, B2): Alpha raises price, Beta does not raise price
(A3, B3): Alpha does not raise price, Beta raises price
(A4, B4): Alpha does not raise price, Beta does not raise price

Let's analyze Alpha's strategies first:
- If Beta raises the price, Alpha's profits are A1 (raise price) and A3 (do not raise price).
- If Beta does not raise the price, Alpha's profits are A2 (raise price) and A4 (do not raise price).

Alpha's dominant strategy:
If A1 > A3 and A2 > A4, Alpha should raise the price.
If A1 < A3 and A2 < A4, Alpha should not raise the price.

Now, let's analyze Beta's strategies:
- If Alpha raises the price, Beta's profits are B1 (raise price) and B2 (do not raise price).
- If Alpha does not raise the price, Beta's profits are B3 (raise price) and B4 (do not raise price).

Beta's dominant strategy:
If B1 > B2 and B3 > B4, Beta should raise the price.
If B1 < B2 and B3 < B4, Beta should not raise the price.

To learn more about dominant strategy : brainly.com/question/30797707

#SPJ11

Every natural number n > 2 is a product of prime numbers.

To prove that every natural number n > 2 is a product of prime numbers, we will use the principle of complete induction (CVI).

First, let's establish the base case. For n = 3, we know that 3 is a prime number, and therefore it is a product of prime numbers. This satisfies the base case.

Now, let's assume that for some natural number k > 2, every natural number between 3 and k (inclusive) is a product of prime numbers. We want to prove that this implies that the next natural number, k+1, is also a product of prime numbers.

There are two possibilities for k+1: either it is a prime number itself, or it is composite (i.e. not prime). Let's consider each case separately.

Case 1: k+1 is a prime number.
If k+1 is a prime number, then it is obviously a product of prime numbers (since it is itself prime). Therefore, our assumption that every natural number between 3 and k is a product of prime numbers implies that k+1 is also a product of prime numbers.

Case 2: k+1 is composite.
If k+1 is composite, then it can be written as the product of two natural numbers a and b, where a and b are both greater than 1. Since a and b are both less than k+1, we know that they are both products of prime numbers (by our assumption). Therefore, k+1 can be written as the product of prime numbers (namely, the prime factors of a and b).

Since we have established the base case and shown that our assumption implies the next natural number is a product of prime numbers, we can conclude by CVI that every natural number n > 2 is a product of prime numbers.

To learn more about prime numbers

https://brainly.com/question/16733393

#SPJ11

The required measure of n and m in the given parallelogram is 11 and 6.

A figure of a parallelogram is shown, in which AC and BD are the diagonals of the parallelogram.

Following the property of a parallelogram, the diagonal of the parallelogram bisects each other.

So,
AP = PC
m = 6

Similarly,
DP =PB

11 = n

Thus, the required measure of n and m in the given parallelogram is 11 and 6.

Learn more about parallelograms here:

https://brainly.com/question/26044249

#SPJ1

The smaller number is 13

Let x and y represent the unknown number

x + y= 47........equation 1

x - y= 21.........equation 2

From equation 1

x + y= 47

x= 47-y

Substitute 47-y for x in equation 2

(47-y)-y= 21

47-y-y= 21

47-2y= 21

-2y= 21-47

-2y= -26

y= 26/2

y= 13

Substitute 13 for y in equation 1

x + y= 47

x + 13= 47

x= 47-13

x= 34

Hence the smaller number is 13

Read more on number here

https://brainly.com/question/15410025

#SPJ1

Answer:population: 39 million; parameter: 56%; sample: 98,422; statistic: 78%

Step-by-step explanation:

Answer:

  (a) Interest: $22.64; Balance: $2733.89

Step-by-step explanation:

You want a 3-month schedule of payments, interest, and the account balance for a sinking fund earning 15% APR on deposits of $900 made at the end of each month.

The interest earned by the account in any given month is the product of the monthly interest rate and the ending balance for the previous month.

The monthly interest rate is 15%/12 = 1.25%. For the second month, interest will be ...

  $900 × 1.25% = $11.25

For the third month, interest will be ...

  $1811.25 × 1.25% = $22.64

After the payment at the end of the third month, the account balance will be ...

  $1811.25 +900.00 +22.64 = $2733.89

__

Additional comment

Total interest earned is $33.89 by the end of the third month. The answer choices seem to be telling you to interpret the question as asking for the interest earned in the third month, not the total interest earned.

To find the coordinates of the endpoints of the image A'B' (A9B9) after dilation of AB by a scale factor of 2 centered at (3,5), follow these steps:

Step 1: Use the given scale factor (2) and center of dilation (3,5).

Step 2: Apply the dilation formula to the coordinates of the original points A and B. The formula for dilation with scale factor k centered at (h,k) is:

A'(x', y') = (h + k(x - h), k + k(y - k))

Step 3: Substitute the given options for A9 and B9 into the dilation formula and check which pair of coordinates satisfy the formula.

After applying the formula, it is determined that the coordinates of the endpoints of the image A9B9 after dilation with a scale factor of 2 centered at (3,5) are:

A9(21, 6) and B9(7, 4).

Option (2) is correct.

Learn more about coordinates :

https://brainly.com/question/12617743

#SPJ11

Answer:

A. 38, 49, 60

Step-by-step explanation:

1. Find the difference between each number in the sequence

To go from -6 to 5, you add 11

To go from 5 to 16, you add 11

To go from 16 to 27, you add 11.

Therefore, the difference in all of the numbers is 11, so the pattern should continue and you should add 11 to the last number (27) making the next numbers 38, 49, 60

The index form is simplified to give 3m/2n

It is important to note that the index forms are models that are used for the representation of variables or numbers that too small or large in more convenient forms.

Some of the rules of index forms are;

From the information given, we have that;

3m³/ n -²• 2m -² n³

Add the like exponents of the denominator

3m³/2m² n³⁻²

add the values

3m³/2m⁻²n¹

Now, subtract the exponents

3/2 n⁻¹ m¹

Then, we have;

3m/2n

Learn about index forms at: https://brainly.com/question/15361818

#SPJ1

[tex] \Large{\boxed{\sf c = 21}} [/tex]

[tex] \\ [/tex]

Solving the equation for c means finding the value of that variable that makes the equality true.

[tex] \\ [/tex]

Given equation:

[tex] \sf 9c - 73 = 6c - 10[/tex]

[tex] \\ [/tex]

To isolate c, we will move the variables to the left member by subtracting 6c from both sides of the equation:

[tex] \sf 9c - 73 - 6c = 6c - 10 - 6c \\ \\ \sf3c - 73 = - 10[/tex]

[tex] \\ [/tex]

Then, we move the constants to the right member by adding 73 to both sides of the equation:

[tex] \sf 3c - 73+ 73 = - 10 + 73 \\ \\ \sf 3c = 63[/tex]

[tex] \\ [/tex]

Finally, divide both sides of the equation by the coefficient of the variable, 3:

[tex] \sf \dfrac{3c}{3} = \dfrac{63}{3} \\ \\ \implies \boxed{ \boxed{ \sf c = 21}}[/tex]

[tex] \\ \\ [/tex]

▪️Learn more about first-degree equations here:

↦https://brainly.com/question/18219612

↦https://brainly.com/question/21222758

This is an exercise of the first degree equation with one unknown is an algebraic equality in which the unknown (generally represented by x) appears with an exponent of 1 and the rest of the terms are constants or coefficients of the unknown. These equations can be solved to find the numerical value of the unknown that satisfies the equality.

The process for solving a first degree equation involves simplifying the equation by eliminating like terms and applying algebraic operations (addition, subtraction, multiplication, and division) to solve for the unknown. It is important to remember that the same operations are applied to both sides of the equation to maintain equality.

It is possible for a first degree equation to have a unique solution, no solution, or an infinite set of solutions. A unique solution means that there is a numerical value for the unknown that satisfies the equality. If the equation has no solution, it means that there is no numerical value for the unknown that satisfies the equality. If the equation has an infinite set of solutions, it means that any numerical value of the unknown that is chosen will satisfy the equality.

Quadratic equations with one unknown are fundamental in mathematics and have applications in many areas, such as solving problems in physics, chemistry, economics, and many other fields.

9c - 73 = 6c - 10

Solving a linear equation means finding the value of the variable that makes it true.

We want all the terms containing the variable to be on the left hand side and all the constants to be on the right hand side.

First, we move the constant to the right hand side by adding the opposite of -73 to both sides.

 9c - 73 + 73 = 6c - 10 + 73

Two opposite numbers add up to zero, so we remove it from the expression.

 9c = 6c - 10 + 73

We add the constants on the right hand side.

 9c = 6c + 63

Now, we move the variable to the left side by adding the opposite of 6c to both sides.

9c - 6c = +6c - 6c + 63

Let's remember! Two opposite numbers add up to zero, so we remove them from the expression.

9c - 6c = 63

We simplify the left hand side by adding like terms.

3c = 63

To isolate the variable c on the left hand side, we have to divide both sides by 3. We have learned that a number divisible by itself is equal to 1, so we can reduce the left hand side to just c.

c = 63/3

All we have to do now is simplify the final division equation.

C = 21

ヘ( ^o^)ノ＼(^_^ )If you want to learn more about mathematics, I share this link to complement your learning:

https://brainly.com/question/15924499

The sinusoidal function has the following features:

Maximum: 2.25, Minimum: - 0.25

Behavior: Increasing, Range: [- 0.25, 2.25]

In this problem we find the representation of a sinusoidal function, from which we must derive the following features:

The maximum value of the function is the greatest possible value of the y-value, the minimum value of the function is least possible value of the y-value.

There are two possible behaviors:

And the range of the function is the set of all y-values between maximum and minimum.

Now we proceed to determine the main features of the function by direct inspection:

Maximum value: 2.25

Minimum value: - 0.25

Behavior on the interval (0, 0.5π): Increasing

The range of the function: [- 0.25, 2.25]

To learn more on sinusoidal functions: https://brainly.com/question/13945310

#SPJ1

An equivalent expression to [tex]7k^2[/tex], where k is an even number, is [tex]28n^2[/tex], where n is an integer.

If k is an even number, then we can write k as 2n, where n is some integer. Substituting this into [tex]7k^2,[/tex] we get:

[tex]7(2n)^2= 7(4n^2)[/tex]

[tex]= 28n^2[/tex]

Therefore, an equivalent expression to [tex]7k^2[/tex], where k is an even number, is [tex]28n^2[/tex], where n is an integer.

An integer is the number zero, a positive natural number or a negative integer with a minus sign. The negative numbers are the additive inverses of the corresponding positive numbers. In the language of mathematics, the set of integers is often denoted by the boldface Z.

Integers come in three types:

Zero (0)

Positive Integers (Natural numbers)

Negative Integers (Additive inverse of Natural Numbers)

To know more about integers visit:

https://brainly.com/question/15276410

#SPJ4

The probability that in a random sample of 100 TCS employees, the monthly expenditure lies between Rs. 38000 and Rs. 39000 is 0.1359 or approximately 13.59%.

To solve this problem, we need to standardize the random variable using the z-score formula:

z = (x - μ) / (σ / sqrt(n))

where:

x = 38000 and 39000

μ = 40000

σ = 20000

n = 100

For x = 38000:

z = (38000 - 40000) / (20000 / sqrt(100)) = -1

For x = 39000:

z = (39000 - 40000) / (20000 / sqrt(100)) = -0.5

Now, we need to find the probability that the z-score falls between -1 and -0.5. We can use a standard normal distribution table or calculator to find this probability.

Using a standard normal distribution table, we find that the probability of z falling between -1 and -0.5 is 0.1359.

Therefore, the probability that in a random sample of 100 TCS employees, the monthly expenditure lies between Rs. 38000 and Rs. 39000 is 0.1359 or approximately 13.59%.

To learn more about approximately visit:

https://brainly.com/question/30707441

#SPJ11

The total number of ordered pairs (A,B) such that |A|+|B|=4 is:

1x5 + 10x6 + 10x10 + 5x1 = 141

So the answer is 141.

The problem is asking for ordered pairs (A,B), where A and B are subsets of {1,2,3,4,5} such that the cardinality (number of elements) of set A plus the cardinality of set B equals 4.

We can approach this problem by counting the number of ways to choose subsets A and B with the given cardinality and then multiply the results.

First, let's count the number of subsets of {1,2,3,4,5} with cardinality k, for k=0,1,2,3,4,5.

k=0: there is only one subset with no elements, the empty set.

k=1: there are 5 subsets with one element, namely {1},{2},{3},{4},{5}.

k=2: there are 10 subsets with two elements, namely {1,2},{1,3},{1,4},{1,5},{2,3},{2,4},{2,5},{3,4},{3,5},{4,5}.

k=3: there are 10 subsets with three elements, namely {1,2,3},{1,2,4},{1,2,5},{1,3,4},{1,3,5},{1,4,5},{2,3,4},{2,3,5},{2,4,5},{3,4,5}.

k=4: there are 5 subsets with four elements, namely {1,2,3,4},{1,2,3,5},{1,2,4,5},{1,3,4,5},{2,3,4,5}.

k=5: there is only one subset with five elements, the whole set {1,2,3,4,5}.

Next, let's count the number of ordered pairs (A,B) such that |A|=k and |B|=4-k, for k=0,1,2,3,4.

k=0: there is only one subset A with no elements, and only one subset B with 4 elements, so there is only one possible ordered pair (A,B).

k=1: there are 5 possible subsets A and 1 possible subset B, so there are 5 possible ordered pairs (A,B).

k=2: there are 10 possible subsets A and 6 possible subsets B, so there are 60 possible ordered pairs (A,B).

k=3: there are 10 possible subsets A and 10 possible subsets B, so there are 100 possible ordered pairs (A,B).

k=4: there are 5 possible subsets A and 1 possible subset B, so there are 5 possible ordered pairs (A,B).

Therefore, the total number of ordered pairs (A,B) such that |A|+|B|=4 is:

1x5 + 10x6 + 10x10 + 5x1 = 141

So the answer is 141.

To learn more about cardinality visit:

https://brainly.com/question/29093097

#SPJ11

a. the population standard deviation is not given, we cannot calculate the standard error of the mean.

b. b. The expected shape of the distribution would still be positively skewed, as the skewness of the population does not change with the sample size.

c. the probability of selecting a sample with a mean of at least $117,000 is 1 - 0.9772 = 0.0228, or about 2.28%.

d. the probability of selecting a sample with a mean of more than $107,000 is 1 - 0.0427 = 0.9573, or about 95.73%.

e. the probability of selecting a sample with a mean of more than $107,000 but less than $117,000 is the difference between these probabilities, which is 0.9772 - 0.0427 = 0.9345, or about 93.45%.

What is standard deviation?

Standard deviation is a measure of the amount of variation or dispersion in a set of data values. It shows how much the data deviates from the mean or average value.

a. The standard error of the mean is given by the formula:

SE = σ/√n

where σ is the population standard deviation, n is the sample size, and √n denotes the square root of n.

Since the population standard deviation is not given, we cannot calculate the standard error of the mean.

b. The expected shape of the distribution would still be positively skewed, as the skewness of the population does not change with the sample size.

c. To calculate the probability of selecting a sample with a mean of at least $117,000, we need to find the z-score corresponding to this sample mean:

z = (x - μ) / (σ / √n)

z = (117000 - 113000) / (35000 / √50)

z = 2.02

From Appendix B.1, we can find that the probability of a z-score being less than or equal to 2.02 is 0.9772. Therefore, the probability of selecting a sample with a mean of at least $117,000 is 1 - 0.9772 = 0.0228, or about 2.28%.

d. To find the likelihood of selecting a sample with a mean of more than $107,000, we need to find the z-score corresponding to this sample mean:

z = (x - μ) / (σ / √n)

z = (107000 - 113000) / (35000 / √50)

z = -1.72

From Appendix B.1, we can find that the probability of a z-score being less than or equal to -1.72 is 0.0427. Therefore, the probability of selecting a sample with a mean of more than $107,000 is 1 - 0.0427 = 0.9573, or about 95.73%.

e. To find the likelihood of selecting a sample with a mean of more than $107,000 but less than $117,000, we need to find the z-scores corresponding to these sample means:

z1 = (107000 - 113000) / (35000 / √50)

z1 = -1.72

z2 = (117000 - 113000) / (35000 / √50)

z2 = 2.02

From Appendix B.1, we can find that the probability of a z-score being less than or equal to -1.72 is 0.0427, and the probability of a z-score being less than or equal to 2.02 is 0.9772. Therefore, the probability of selecting a sample with a mean of more than $107,000 but less than $117,000 is the difference between these probabilities, which is 0.9772 - 0.0427 = 0.9345, or about 93.45%.

To learn more about standard deviation visit:

https://brainly.com/question/475676

#SPJ4

For 420 minutes of calls will the costs of the two plans be equal.

We have,

The first plan has a $21 monthly fee and charges an additional $0.09 for each minute of calls.

The second plan has no monthly fee but charges $0.14 for each minutes.

So, the equation can be set as

0.14x = 0.09x +21

where x be the number of minutes.

0.14x - 0.09x = 21

0.05x = 21

x = 420 minutes

Learn more about Equation here:

https://brainly.com/question/29657983

#SPJ1

Answer:

[tex]50( {.9}^{8} ) = 21.52[/tex]

The 8th bounce will be about 21.52 feet high.

In this scenario, there are two workers in a team, and each worker can either work hard or shirk. The probability of the overall project succeeding is dependent on the efforts of each worker. If both workers shirk, the probability of success is p0. If one worker shirks and the other works hard, the probability of success is p1. Finally, if both workers work hard, the probability of success is p2, where p2>p1>p0.

The cost of effort is c, and the principal cannot observe the individual efforts of each worker, but only the success or failure of the whole project. The challenge is to design an optimal contract that encourages both workers to exert effort all the time.

The optimal contract would offer a payment scheme to both workers that would incentivize them to work hard. If the workers work hard and the project succeeds, they receive a reward. If the workers shirk, they receive no reward.

The workers' efforts in this scenario are substitutes for each other. This is because if one worker shirks, the probability of success decreases, and the other worker would have to work harder to compensate for the first worker's lack of effort. Therefore, both workers must work hard to maximize the probability of success.

In conclusion, an optimal contract must be designed that encourages both workers to work hard and rewards them for the successful completion of the project. Additionally, the efforts of both workers in this scenario are substitutes for each other.

more on probability: https://brainly.com/question/13604758

#SPJ11

The number of people expected to go to the Youth Wing, would be 255 people.

Find the total amount of people who will be visiting on Saturday:

= 382 ( Youth Wing ) + 461 ( Social Issues ) + 355 ( Fiction and Literature )

= 1, 198

Then the proportion of those who went to Youth Wing :

= 382 / 1, 198

= 0. 319

The estimated people going for Youth Wing on Sunday :

= 0. 319 x 800

= 255 people

In conclusion, an estimated 255 people would be going to Youth Wing.

Find out more on people at https://brainly.com/question/23477098

#SPJ1

The required, equation to determine the number of people is T + (T + 5,500) + 2T + (2T + 300) = 36,700 and there were 10,300 people at the fair on Saturday.

Let's call the number of people who attended the fair on Thursday "T". Then we can use the information in the problem to set up an equation:

Friday's attendance = T + 5,500

Saturday's attendance = 2T

Sunday's attendance = 2T + 300

Total attendance = T + (T + 5,500) + 2T + (2T + 300) = 36,700

Simplifying the equation, we get:

6T + 5,800 = 36,700

6T = 30,900

T = 5,150

Therefore, the attendance on Thursday was 5,150 people. We can use this information to find the attendance on Saturday:

Saturday's attendance = 2T = 2(5,150) = 10,300

Thus, there were 10,300 people at the fair on Saturday.

Learn more about models here:
https://brainly.com/question/22591166
#SPJ1

The matrix A with eigenvalues λ1 = 4, λ2 = 1, and corresponding eigenvectors v1 = (2, 1)t, v2 = (1,0)t is:

A = [v1 v2] = [2 1; 1 0]

Yes, it is possible to write a matrix A such that its eigenvalues and corresponding eigenvectors are λ1 = 4, λ2 = 1, and v1 = (2, 1)t, v2 = (1,0)t.

Let A be the matrix with columns given by the eigenvectors of A:

A = [v1 v2] = [2 1; 1 0]

Then, we can calculate the eigenvalues of A by finding the roots of its characteristic polynomial:

|A - λI| = |2-λ 1; 1 0-λ| = (2-λ)(-λ) - 1 = λ^2 - 2λ - 1

Solving for λ, we get:

λ1 = 4, λ2 = 1

which are the desired eigenvalues.

Next, we can find the corresponding eigenvectors by solving the equations (A - λI)x = 0 for each eigenvalue:

For λ1 = 4:

(A - λ1I)x = ([2 1; 1 0] - [4 0; 0 4])x = [-2 1; 1 -4]x = 0

Solving the system of equations, we get x1 = -1 and x2 = -1/2, so the eigenvector corresponding to λ1 is:

v1 = [-1; -1/2]

For λ2 = 1:

(A - λ2I)x = ([2 1; 1 0] - [1 0; 0 1])x = [1 1; 1 -1]x = 0

Solving the system of equations, we get x1 = 1 and x2 = -1, so the eigenvector corresponding to λ2 is:

v2 = [1; -1]

Therefore, the matrix A with eigenvalues λ1 = 4, λ2 = 1, and corresponding eigenvectors v1 = (2, 1)t, v2 = (1,0)t is:

A = [v1 v2] = [2 1; 1 0]

To learn more about  eigenvectors  visit: https://brainly.com/question/31013028

#SPJ11

Answer: 17/25 miles per hour

Step-by-step explanation:

In order to find your answer, you will need to divide 3 and 2/5 by 5 hours

or (3.4/5) which equals 0.68.

As a fraction, 0.68 is 17/25 which is your answer :)

And if you want to check your work, simply multiply 0.68 x 5 and you get 3.4 (which is 3 and 2/5's)!

Good Luck!