a 0.03 mol sample of c3h8 is reacted with just enough o2 to use up both reactants in a 1 l flask at 300 k. the total pressure in the flask after the reaction is complete is closest to which of the following?

The compound that we have in the SDS is glycerol.

We know that the SDS is the acronym that stands for the safety data sheet. This is the kind of sheet that tells us about the properties of a substance and any other safety information that we might need.

From the information, we can see that compound is not flammable and that it does not vaporize quite easily thus it is quite safe and this would correspond to glycerol. This corresponds to the safety data sheet that we have.

Learn more about glycerol:https://brainly.com/question/9944804

#SPJ1

The induced-fit hypothesis of enzyme-substrate interaction illustrates that there is a conformational change in the active site of the enzyme when a substrate binds to it.

According to the induced-fit model, a substrate attaches to an active site, and the two of them slightly alter their shapes to form the perfect fit for catalysis. By bringing substrates together in the best possible orientation, enzymes encourage chemical reactions by establishing the perfect chemistry for the reaction to take place. According to the induced fit hypothesis, an enzyme's active site is not architecturally ideal for substrate binding while it is in the unbound state, or when it is not binding to a substrate. Refer to the image attached for the cartoon illustration.

This induced fit theory extends the lock-and-key idea proposed 100 years ago. In addition to explaining regulatory and cooperative effects, the new theory put out by D. E. Koshland, Jr. in 1958 also provides some new specificity notions. This theory states that an enzyme's unbound active region is not structurally suitable for substrate binding (i.e., not bound to the substrate).

To know more about induced fit theory, refer:

https://brainly.com/question/27548378

#SPJ4

If you analyze a carbon sample and discover that 6% of the carbon atoms have an atomic number greater than 12, you may safely assume that 6% of the sample is made up of carbon isotopes.

Carbon-12 (12 C), which has six neutrons in addition to its six protons, is by far the most common isotope of carbon. The following-heaviest isotope of carbon, carbon-13 (13 C), has seven neutrons. They are both referred to as stable isotopes since neither 12 C nor 13 C experience radioactive decay over time. The nuclear charge number (sign Z) of an atomic nucleus is the chemical element's atomic number. The proton number in regular nuclei is equivalent to this (np).

Learn more about atomic number here

https://brainly.com/question/16858932

#SPJ4

The limiting reactant and excess reactant can be determined by a concept known as the Law of Conservation of Mass.

To learn more about The limiting reactant and excess reactant refer to:

https://brainly.com/question/14222359

#SPJ1

A sample containing 1 mol of an ideal gas in a flexible, closed container. The changes will cause the volume to decrease is :

1) To decrease the temperature and the increase in pressure.

2) Temp decreases and pressure remains constant.

The ideal gas equation is as follows :

P V = n R T

Number of moles = 1 mol

n = 1

V = R T / P

The temperature is directly proportional to the volume and the pressure is inversely proportional to the volume.

So, the conditions that will decreases the volume are :

1) To decrease the temperature and the increase in pressure.

2) Temp decreases and pressure remains constant.

To learn more about ideal gas here

https://brainly.com/question/24928212

#SPJ4

To convert the pressure inside the bag from mm Hg to kPa, we can use the conversion factor:

1 kPa = 7.5 mm Hg

So, we can divide the pressure in mm Hg by 7.5:

761.3 mm Hg / 7.5 = 101.5 kPa

So, the pressure inside the bag of potato chips is approximately 101.5 kPa.

It is important to note that the conversion factor of 1 kPa = 7.5 mm Hg, is an approximation and it can vary depending on the temperature and altitude.

Therefore, the pressure inside the bag of potato chip in kPa is 101 kPa (rounded to the nearest whole number)

Due to their porous and permeable nature, gravel and sand are excellent aquifer materials. The most permeable material is gravel.

To learn more about materials refer to:

https://brainly.com/question/17563681

#SPJ1

Charlotte is driving at 69.8 mi/h and receives a text message. She looks down at her phone and takes her eyes off the road for 3.27 s.  102.02 m  far has Charlotte traveled in feet during this time.

The term speed is defined as the rate of change of position of an object in any direction.

Given:

The speed at which charlotte is driving = 69.8 mi/h

The time which she took of her eyes from the road = 3.27 s

During the entire journey, the time at which she took her eyes off the road, she is probably not driving.

We will have to convert the 69.8 mi/h to m/s

Since 1 mi/hr = 0.44704 m/s

69.8 mi/h will be:

= (69.8 mi/hr × 0.44704 m/s) ÷ 1 mi/hr

= 31.20 m/s

Now, using the relation:

Speed = distance/ time

31.20 m/s = (distance)  / 3.27s

By Cross multiplying

Distance = 31.20 m/s  × 3.27s

Distance = 102.02 m

Thus, Charlotte traveled by feet for 102.02 m during this time.

To learn more about the speed, follow the link;

https://brainly.com/question/28224010

#SPJ1

The maximum electron capacity at energy level 1 is 2. The maximum electron capacity at energy level 2 is 8. Maximum electron capacity at energy level 3 is 18. The maximum number of electrons at energy level 4 is 32.

Having a negative electric charge, an electron is a subatomic particle. Together with protons and neutrons, it is one of the basic building blocks of atoms.

The chemical characteristics of elements are determined by electrons, which are found in the valence shell, the outermost shell of an atom. In addition, they have a role in the production of magnetism, electrical conduction, and chemical processes. Additionally, as in an electron beam, electrons can also exist freely and independently.

To know more about electron, visit:

brainly.com/question/1255220

#SPJ4

Smaller numbers mean less risk of losing, but  less chance of gain, Volatility.

to learn more about gain from the given link:

https://brainly.com/question/28891489

#SPJ1

Answer :a chemical reaction in which a more reactive element displaces a less reactive element from its compound

Explanation:

Displacement reaction is a chemical reaction in which a more reactive element displaces a less reactive element from its compound. Both metals and non-metals take part in displacement reactions. Example : Reaction of iron nails with copper sulphate solution.

Answer:

Chemical reactions known as displacement reactions occur when a more reactive element removes a less reactive element from a molecule.

The free energy change for the same reaction when the concentrations of A and B are 0.01 M and 1 M, respectively, is -2.501 kJ/mol.

The free energy change, ΔG, for the chemical reaction A → B is determined by the equation ΔG = -RT ln(K), where R is the gas constant, T is the temperature, and K is the equilibrium constant.

Because the temperature of the reaction is held constant, the ΔG will remain the same no matter what the concentrations of A and B are.

To calculate the free energy change for the reaction when the concentrations of A and B are 0.01 M and 1 M, respectively, we need to calculate the new equilibrium constant, K.

K is equal to the product of the concentrations divided by the reactants. For this reaction, K = (1 M)(0.01 M)/(10 M) = 0.001.

Plugging this value of K into the equation for ΔG,we get

ΔG = -RT ln(K) = -(8.314 J/K mol)(310 K) ln(0.001) = -2.501 kJ/mol.

This is the free energy change for the reaction when the concentrations of A and B are 0.01 M and 1 M, respectively.

To learn more about energy, click here:

https://brainly.com/question/1932868

#SPJ4

The underwater mountain range that is shown in the image is the Mid-Atlantic Ridge. This range runs down the center of the Atlantic Ocean, and is a part of the global mid-ocean ridge system.

The Mid-Atlantic Ridge is a divergent plate boundary, which means that it is an area where two tectonic plates are moving away from each other. As the plates move apart, magma from the Earth's mantle rises to the surface and cools, forming new crust. This process of seafloor spreading is what creates the underwater mountain range.

One possible explanation for the location of the Mid-Atlantic Ridge in the middle of the ocean is that it is a response to the convective motion of the Earth's mantle. The mantle is made up of hot, dense rock that is constantly moving around.

Another possible explanation is that the Mid-Atlantic Ridge is the result of past tectonic activity. The Atlantic Ocean was formed by the separation of the supercontinent Pangea into two parts, Laurasia and Gondwana. The ridge is a remnant of the rift that separated these two supercontinents.

In all, the Mid-Atlantic Ridge is a fascinating feature that provides important information about the Earth's geology and tectonic activity. Its location in the middle of the ocean is a reminder of the dynamic nature of our planet, and the ongoing process of seafloor spreading that is constantly shaping the Earth's surface.

Learn more about topography from

https://brainly.com/question/24146311

#SPJ1

Answer:Science is important because science

is the the way to know about other things that we didn't know about our planet and many other things.

Explanation:thank you hope it

The E2 elimination reaction of cyclo-alkylhalides are usually stereo selective. Usually trans isomer reacts slowly than cis-isomer. So the elimination reaction in an alkaline potassium hydroxide medium will be  1-methyl cyclohexene.

The reason behind stereo selectivity is because pf the spatial orientation of the substituents on the ring structure. For cyclic compounds this has a great influence to direct a reaction in Regio-selectivity. The transition state between the reactant and product  influence in the rate of elimination reaction.

Here the major elimination product is 1-methyl cyclohexene and a minor amount of 3-methyl cyclohexene is also produced.

For more information regarding elimination reaction, kindly refer

https://brainly.com/question/28239179

#SPJ4  

(The question is not complete. The complete question is given as an image)

SiI4 + 2Mg → Si + 2MgI2  is the the answer/solution to this problem SiI4 + Mg which expresses its balanced equation.

Silicon is described as a chemical element with the symbol Si and atomic number 14. It is a hard, brittle crystalline solid with a blue-grey metallic luster, and is a tetravalent metalloid and semiconductor.

There are four rules to balance a chemical equation and it is shown below:

Learn more about chemical equation at: https://brainly.com/question/29886207

#SPJ1

A total of 1397 j of heat are required, a substance's specific heat is the amount of energy required to increase its temperature by one degree Celsius (°C) for one gram of that substance.

A substance's specific heat is the amount of energy required to increase its temperature by one degree Celsius (°C) for one gram of that substance.

In comparison to other substances, water has a high specific heat, which means that raising its temperature requires more energy.

Explanation:

Data provided

Copper tubing weighs 595.0 g in total.

15.18 °C when temperature is initial

Finished temperature was 21.28 °C.

Copper's particular heat is equal to 0.3850 j/g°C.

Heat needed in terms of =?

Solution:

Thermodynamic shift

ΔT = T2 - T1

ΔT = 21.28 - 15.18 = 6.1 °C

Formula:

Q = m. c. ΔT

Q is the heat flux

m Equals mass

c is the specific heat

T is the temperature change.

The values will now be entered into the formula.

Q = m. c. ΔT

Q = 595 g. 0.3850 j/g°C . 6.1 °C

Q = 1397.36 j

A total of 1397 j of heat are required.              

To learn more about specific heat refer to:

https://brainly.com/question/27991746

#SPJ1

The fill in the blanks is as follows :

a) Reactants

b) Products

The value of the equilibrium constant k is the measure of how far will the reaction proceeds toward produce the products at a temperature.

a) A small value of k indicates that the reaction will favors the reactants.

b) Whereas a large value of k indicates that the "product" will be present in the higher proportion.

The equilibrium reaction is the state of the reaction where the rate of the forward reaction is equals to the rate of the backward reaction. The rate of the forward reaction is equals to the rate of the backward reaction.

This question is incomplete , the complete question is :

The value of the equilibrium constant k is a measure of how far the reaction proceeds toward the products at a given temperature. a small value of k indicates that the reaction favors the , whereas a large value of k indicates that the will be present in a higher proportion. multiple choice question.

a) Reactant

b) Product

c) Both reactant and product

To learn more about equilibrium reaction here

https://brainly.com/question/15118952

#SPJ4

Density of a block of aluminum occupies a volume of 10mL and has a mass of 40 g is 4g/ml.

Define density.

A material's density is determined by how closely it is packed. As the mass per unit volume, it has that definition. The relationship between density and volume and mass is inverse.

The density rises if the volume remains constant while the amount of matter increases. Density drops when volume grows without accompanying increases in mass. When a substance is heated, the molecules move faster and slightly farther apart, taking up more space and causing the density to drop. When something is cooled, the molecules slow down and get a little closer together, taking up less space and becoming denser.

D = M/V

Mass, M is 40 g.

Volume, V of 10mL

Density, D will be 40/10 i.e. 4g/ml.

To learn more about density use link below:

https://brainly.com/question/26364788

#SPJ1

When the Hydrogen sulfide decomposes according , the equilibrium concentration of H₂ is 0.0019 mol/L.

Given that :

Numbers of moles of H₂S = 0.49 moles

The Volume = 3.0 L

The Equilibrium constant = 9.30 × 10⁻⁸

The reaction is given as :

2H₂S    ⇄   2H₂(g)  +  S₂(g)

Initial concentration = 0.49 / 3

                                  = 0.16 mol

                     2H₂S    ⇄             2H₂(g)  +         S₂(g)

Initial         0.9166                           0                           0

Change       -2 x                               +2 x                      + x

Equilibrium   (0.16 - 2x)                   2x                         x

kc  = [H₂]²[S₂]² / [H₂S]²

9.30 × 10⁻⁸ = (2x)²(x²) / ( 0.16 - 2x)²

x = 9.5 × 10⁻⁴

The equilibrium concentration for H₂ = 2x

                                                              = 2 ×  9.5 × 10⁻⁴

                                                              = 0.0019 mol/L

To learn more about equilibrium concentration here

https://brainly.com/question/14785440

#SPJ4

If an asteroid created enough dust to block out the Sun, it would likely have a severe and devastating effect on life on Earth.

Green plants, which rely on sunlight for photosynthesis, would not be able to produce the energy they need to survive, leading to mass die-offs of vegetation. This would in turn have a cascading effect on the entire ecosystem, as animals that depend on plants for food would also struggle to survive. The lack of sunlight would also cause a decrease in temperature, which can have a negative impact on many organisms.

The lack of sunlight would also have a severe impact on the climate and weather patterns, leading to a "nuclear winter" scenario, where the temperature drops significantly, leading to the extinction of many species, including the human species, who rely on the food chain.

False. The number of transporters present in a cell membrane does not directly correspond to the rate at which solutes may diffuse.

Transporters are proteins that span the cell membrane and actively transport specific molecules across the membrane, against their concentration gradient, using energy from ATP. They do not increase the rate of diffusion of solutes which is passive movement of solutes from high concentration to low concentration areas.

Diffusion rate is determined by several factors, including the concentration gradient of the solute, the permeability of the membrane to the solute, and the temperature. The presence of transporters may affect the overall rate of solute transport across the membrane, but this is not the same as the rate of diffusion.

To learn more about Transport click here:

https://brainly.com/question/29759743

#SPJ4

A element that does not belong to the four elements that are most frequently found in living things is sulfur.

A fundamental object that is difficult to divide into smaller bits is known as an element. An element is a chemical that cannot be broken by non-nuclear reactions in chemistry or physics. A discrete component of a bigger structure or collection is referred to as an element in computers and mathematics.

Each element is made up of atoms which are composed of neutrons, electrons, and neutrons. Two distinct atom types can be combined to form a compound. Although a molecule cannot be distinguished from the larger material, it shares many characteristics with it.

To know more about element visit:

https://brainly.com/question/8460633

#SPJ4

Taking into account the reaction stoichiometry, a mass of 14.86 grams of H₂ is needed to produce 84.2 grams of ammonia.

The balanced reaction is:

N₂ + 3 H₂ → 2 NH₃

By reaction stoichiometry, the following amounts of moles of each compound participate in the reaction:

The molar mass of the compounds is:

By reaction stoichiometry, the following mass quantities of each compound participate in the reaction:

The following rule of three can be applied: If by reaction stoichiometry 34 grams of NH₃ are produced by 6 grams of H₂, 84.2 grams of NH₃ are produced by how much mass of H₂?

mass of H₂= (84.2 grams of NH₃× 6 grams of H₂)÷ 34 grams of NH₃

mass of H₂= 14.86 grams

Finally, 14.86 grams of H₂ are needed.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

brainly.com/question/24653699

#SPJ1

When equal volume and concentration of NaCl solutions, held at different temperatures, are combined in a larger flask, the final solution will have the following characteristics:

In summary, the combination of equal volume and concentration of NaCl solutions, held at different temperatures, in a larger flask will result in a solution with the same NaCl concentration but a temperature that is determined by the initial temperature and heat capacities of the solutions.

Learn more about NaCl solutions here:

https://brainly.com/question/28123588

The complete question is:

What will happen when equal volume and concentration of NaCl solutions, held at different temperatures, are combined in a larger flask?

#SPJ4

Forensic science is described as the application of science to law. 2. The fictitious adventures of Sherlock Holmes piqued the interest of a younger group of forensic scientists as well as criminal detectives.

Forensic science was an important component of the criminal justice system. Forensic scientists study and analyze evidence collected from crime scenes as well as other locations to produce objective results that can aid in the investigation as well as prosecution of criminal criminals or clear an innocent person of such suspicion.

DNA testing as well as analysis is now regarded as the most reliable of any and all forensic tools. Unlike lot of people of the others assembled to address the requirements of law enforcement, it was subjected to rigorous scientific experimentation as well as validation before being used in forensic science.

To know more about Forensic science

https://brainly.com/question/29773304

#SPJ4

When an aldehyde or ketone combines with an alcohol in the presence of a potent acid catalyst, hemiacetals are the intermediate molecules that result.

Alcohol and ether are joined to the same carbon atom as hemiacetals. Hydrogen is positioned at the fourth bonding position. An aldehyde is the precursor of a hemiacetal.

A hemiacetal's basic structure is R1-C(OH)-R2-whereas a hemiketal's basic structure is R1-C(OR2)-R3-. Intermolecular reactions can occur depending on the starting components and environmental factors. The removal of the alcohol readily transforms hemiacetals and hemiketals into the equivalent aldehyde or ketone, indicating that in general, these molecules are relatively unstable.

To know more about hemiacetal, visit:

brainly.com/question/28030326

#SPJ4